DynaScan DS55LT6
Contents
1. DS55LT6 LR6 User Manual 10 Orientation e When used in the portrait orientation the LCD should be rotated clockwise such that the left edge becomes the top edge Installation Location The ceiling or the wall must have enough strength to support the LCD and its accessories Do not install in a location with strong vibrations or is dusty Do not install near the building s main electric panel Do not install at a location where the LCD can be easily removed by the general public When installed in an alcove leave at least 10cm 4 of space around the LCD to ensure proper ventilation 711 10 cm 4 in A 10 4 in 0555176 LR6 User Manual 11 When hanging from a ceiling 6 Ensure that the ceiling is strong enough to support the LCD and it accessories Also consider the effects of earthquake unexpected vibration and other external forces when evaluating the ceiling strength The LCD should be secured to the building s structural frame such as a beam and not to materials such as light steel frame or interior decoration e Do not use wood screws or dry wall anchors for installation Maintenance Inspect the fasteners regularly for signs of loosening or deformation Please perform appropriate corrective measures when a problem is identified Neglecting the problem may2. Humidity 10 80 RH Non Condensing DVI D IN 1 OUT 1 I O Ports RS 232 IN 1 OUT 1 Design and specifications are subject to change without notice Monitor Weight set package DS55LT6 LR6 User Manual 23 Pin Assignments Digital RGB Output DVI D DVI 4 roe nc Digital RGB Input DVI D DVI Shield RX2 Shield RX1 RX3 o pocSemGek 9 isvoor DS55LT6 LR6 User Manual 24 JJ N N 01 connected to 7 amp 8 0 RXD 0 TXD O ER connected to 6 GND connected to 4 7 connected to 1 amp 8 connected to 1 amp 7 connected to 7 amp 8 connected to 6 connected to 4 connected to 1 amp 8 connected to 1 amp 7 DS55LT6 LR6 User Manual 25 Troubleshooting Check whether the DVI in cable is completely plugged in e Check whether the main switch is in the ON position and the power cord No image is displayed is completely plugged in e Check whether the image source s resolution is set to 1920 x 1080 1080P e Check whether the DVI cable is damaged or bent excessively e Unplug the power cord from the socket and plug it back in after a few Nothing happens when switching seconds to reset the Signage the main switch on Note DS65LT4 does not have a power off indicator Note Unplugging the power cord will not change the settings Image is unstable e Ch
3. Professional LCDs User Manual 7 7 hs Bel HET aScan Version 1 00 The use of diagrams and illustrations in the manual for reference only actual product may be different Product design and specifications are subject to change without notice Contents OE E E E A EEA E AE 3 important Satiety I0 0 00 TET 4 Declaration Ol 6 7 COE MINE E E 7 Installing and Replacing Remote Control 8 Daci mM P 9 E 9 13 Connecting an External Video 5 13 Connecting Multiple Displays for Video Wall 14 15 Tm m 17 17 Powering On Off the Display 0000 200010 nennen nennen nhan nn nnns sine enne se ihe Remote 620 0 17 20 Navigating the On Screen Display OSD Menu 22 00000 00 0 0 00000000 nennen 21 50 23 P
4. cord Gently wipe the casing with a soft cloth Attention 6 Do not use any of the following solutions to clean the casing as they may damage the paint and cause it to crack or peel benzene solution alkaline solution alcohol based cleaning solution glass cleaner wax polisher or detergent DS55LT6 LR6 User Manual 5 Declaration of Conformity FCC Verification This device complies with Part 15 of the Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation FCC Information This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense Declaration of the Manufacturer We hereby certify that the Professional LCD 0555176 LR6 is in compliance with Low Voltage D
5. 17 DS55LR6 E 3 m 59 8 123 4 40 7 al Vul 0 S 0 d em GO C i t ME 2 oco jv AY o o o0 O GO LC T l F D C C E O C X J 44 p 5 D 4 p pog aet Q 22 x 0 C prc OB UE 0 C H F Vd J O DO o AN 295906 f EX n9 o9 st 9 Fx gt lt A oC o9 9 E 0909 Q Q e Ss L 22 5 0 2 9 0 DS55LT6 LR6 User Manual 16 Operating Instructions Powering On Off the Display To turn on off the display press the power switch on the back of the display as shown in the diagram below NOTE the remote control only works when the main switch j is in the ON position Using the Remote Control When using the remote control aim the remote at the IR receiver on the display The IR receiver on the DS55LR6 model is at the front of the display with a receiving angle of 160 degrees receiver on the DS55LT6 model is at the back of the display with a receiving angle of 100 degrees The IR receiver configurations of the two models are shown in the figure
6. CALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE DYNASCAN CANNOT LAWFULLY DISCLAIM IMPLIED WARRANTIES UNDER THIS LIMITED WARRANTY ALL SUCH WARRANTIES INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY No DynaScan reseller agent or employee is authorized to make any modification extension or addition to this warranty DYNASCAN IS NOT RESPONSIBLE FOR DIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION OR UNDER ANY OTHER LEGAL THEORY INCLUDING BUT NOT LIMITED TO LOST PROFITS DOWNTIME GOODWILL DAMAGE TO OR REPLACEMENT OF EQUIPMENT AND PROPERTY ANY COSTS OF RECOVERING OR REPRODUCING ANY DS55LT6 LR6 User Manual 29 PROGRAM OR DATA STORED IN OR USED WITH DYNASCAN PRODUCTS AND ANY FAILURE TO MAINTAIN THE CONFIDENTIALITY OF DATA STORED ON THE PRODUCT DYNASCAN SPECIFICALLY DOES NOT REPRESENT THAT IT WILL BE ABLE TO REPAIR ANY PRODUCT UNDER THIS WARRANTY OR MAKE A PRODUCT EXCHANGE WITHOUT RISK TO OR LOSS OF PROGRAMS OR DATA DS55LT6 LR6 User Manual 30 www dynascanusa com Copyright DynaScan Technology Inc All Rights Reserved
7. S SIMS US T EE 24 Digital RGB Output DVI D nsns 24 Digital RGB Input DVI D tutu 24 SPICY EROR E 25 DS55LT6 LR6 User Manual 1 25 5 pee sesso m m 26 Recycling and Energy 27 28 IA mm 29 DS55LT6 LR6 User Manual 2 Safety Precautions Do not install display in a wet environment or place anything on the top of the display filled with liquid such as vase or beverage o After extended use the heat sink behind the screen may be hot Do not touch to avoid being burned Do not touch the screen panel with sharp objects or extreme pressure to avoid damage to the panel The display should be installed in well ventilated place do not install in a confined space Do not drop or allow any object to fall to the screen Do not touch the screen with wet hands to avoid electric shock When cleaning unplug the monitor Use a soft dry cloth to wipe the screen off Do not use alcohol or other chemical liquids If you smell smoke or hear a strange noise immediately unplug the monitor and contact the vendor Do not discard this product with general household waste Please be sure to comply with the loca
8. ardous substances can leak into the groundwater and get into the food chain damaging your health and well being When replacing old appliances with new one the retailer is legally obligated to take back your old appliances for disposal at least for free of charge DS55LT6 LR6 User Manual 27 Material Contents Declaration Hazardous Substances Hexavalent Polybrominated Polybromodiphenyl Part Name Lead Mercury Cadmium Chromium Biphenyls Ethers m o eR 6 o o o o o indicates that the level of the specified chemical substance is less than the threshold level specified in the standards of SJ T 11363 2006 and EU 2005 618 EC X indicates that the level of the specified chemical substance exceeds the threshold level specified in the standards of SJ T 11363 2006 and EU 2005 618 EC DS55LT6 LR6 User Manual 28 Limited Warranty WARRANTY COVERAGE DynaScan s warranty obligations are limited to the terms set forth below DynaScan warrants its product against defects in materials and workmanship for a period of TWO 2 YEARS from the date of initial installation 1f a defect exists DynaScan will repair the product at no charge replacement part assumes the remaining warranty of the original product or NINETY 90 DAYS from the date of replacement or repair whichever provides longer coverage for you When a part is exchanged any repla
9. below The operating range of the remote control is 2 5 meters 8 feet Ambient light may affect the performance of the remote control Avoid fluorescent or neon lights in the vicinity DS55LT6 LR6 User Manual 17 095551 6 0955176 Front Back DS55LT6 LR6 User Manual 18 Using the Remote Control cont Color and shape may vary by model 8 MENU OSD On Off Move the cursor up or change the setting of the selected item Exit the current selection Select the highlighted item Move the cursor down or change the setting of the selected item DS55LT6 LR6 User Manual 19 Using the Rear Panel Controls ud 1 1 CI C C CO CH C CI CIC C C CIO C CI C C CO C CO CIC CI C C3 C C3 C1 C CI CL CI CO CI CO C C CO C O CIO CO EI 300 00 0 un mE 0 0 00 00 DON O00 000000 1 10 000 I C DOUUIUDIIU rUdDdDmDUnImDIIUDrL 3 0 oc 2 2 2 2 3 2 7 2 3 2 3 B DS55LT6 LR6 User Manual 20 Navigating the On Screen Display OSD Menu Press the MENU button on either the real panel control
10. cement item becomes your property and the replaced item becomes DynaScan s property OBTAINING WARRANTY SERVICE You must contact DynaScan identify the unit by model number serial number and date of purchase and furnish a brief description of the problem EXCLUSIONS AND LIMITATIONS This Limited Warranty applies only to products manufactured by DynaScan that can be identified by the DynaScan trademark trade name or logo affixed to them The Limited Warranty does not apply to any non DynaScan products or any software even if packaged or sold with DynaScan hardware Non DynaScan manufacturers suppliers or publishers may provide their own warranties DynaScan and its Authorized Service Providers are not liable for any damage to or loss of data or other information stored on any media or any non DynaScan product or part not covered by this warranty This warranty does not apply a to damage caused by natural disasters accident abuse misuse misapplication neglect b to damage caused by service including upgrades and expansions performed by anyone who is not an DynaScan Authorized Service Provider c to a product or a part that has been modified without the written permission of DynaScan or d if any DynaScan serial number has been removed or defaced THIS WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES REMEDIES AND CONDITIONS WHETHER ORAL OR WRITTEN EXPRESS OR IMPLIED DYNASCAN SPECIFI
11. compartment cover Warning e Incorrect usage of batteries may cause leakage or explosion e Pay attention to the polarity when installing batteries e Do not use batteries from different brands together Do not mix new and used batteries Doing so may shorten the battery life or cause leakage e Remove the batteries or replace them with a new pair when the batteries are depleted in order to prevent battery leak in the battery compartment e Do not touch the leaked substance from the batteries in case of a battery leak Doing so may damage human skin Note if you plan on not using the remote control for a long period of time we recommend removing the batteries from the remote control DS55LT6 LR6 User Manual 8 Installation The LCD must be properly installed using a wall mount Incorrect installation may cause injury or damage the equipment Product warranty does not cover damages caused by improper installation and DynaScan shall not be held responsible in such incident Mounting e Hanging the Professional LCD from the ceiling or mounting it on the wall is the responsibility of the user Not all ceilings or walls provide enough strength to support the LCD The LCD may drop and cause serious injury if it is hanging from the ceiling with insufficient support or is mounted on a slanted wall Product warranty does not cover improper installation modification or damages caused by natural disasters DynaScan recommends hiring certi
12. eck whether the DVI in cable is completely plugged in e Check whether there are batteries in the remote control e Check the batteries for freshness polarity etc The remote control does not work gt Check whether the remote is in the operation range e Bright light may interfere with the remote control Please avoid using the remote control near special fluorescent lights or neon lights e Check whether the TIMER setting in the menu is set to OFF Auto on off does not work or does e Check whether the Power On Time and Power Off Time settings are not function properly set correctly Cannot control the display e Check whether the RS 232 cable is connected properly remotely via RS 232 If you are still having trouble with your DynaScan DS Professional LCD contact your dealer or DynaScan directly for more assistance DS55LT6 LR6 User Manual 26 Recycling and Energy Information DynaScan is firmly committed to its environmental protection efforts and we believe that reducing our products impact on the environment is of the utmost importance We are dedicated to meet the latest environmental protection regulations Energy usage Disposal Do not dispose of electrical appliances as unsorted municipal waste use separate collection facilities Contact your local government for information regarding the collection systems available If electrical appliances are disposed of in landfills or dumps haz
13. ect the RS 232 OUT of the 1 display to the RS 232 IN of the 2 display Repeat connection for remaining displays Use the OSD Menu to configure the size of the video wall and the position of each display n Note The maximum number of DS55Lxx s in a Video Wall is 36 6 x 6 T Note The DynaScan Display Manager application is required to be installed on the PC in order to use the External Control feature Video Source RS 232 IN DVI IN DISPLAY 1 vv 1 Se SS _ DVI OUT RS 232 OUT RS 232 UN S i IN T E c DI eos Sor pug _ LL DVI OUT RS 232 OUT RS i IN 7 H a on iXX Emp Tel 555 mug 0555176 LR6 User Manual 14 Connector Positions oe je je _ DS55LT6 i uad 101 5 j M 6 L1 C1 C CI CI DD i CI CI CL CIL CI CI CI C C IN 0 0 a P am aay E 0 5 Q 0 C L1 C1 C1 EI CD CI EI C1 CI D CI EI C CI EI 6 CI C1 CI EI CI CIL EJ DIL EI DO DO E O CO DO UO E DO EI 10 5 4 DS55LT6 LR6 User Manual 15 f 1
14. fied professionals to evaluate the installation site and mounting operation Do notto cover the vent and or the heat sink in order to ensure proper heat dissipation When mounting on a wall or hanging from a ceiling A wall mount is not included in the accessory Please purchase a VESA Standard wall mount to secure the LCD DynaScan is not responsible for damages caused by using non standard wall mounts Verify that the mounting location can support the weight of the LCD before installation e The installation angle must be within 15 degrees of the vertical axis Do not install the wall mount while the power is turned on as it may cause serious injury from electrical shock VESA mm Screw specification Screw Length DS55LT6 A 4003400 Greater than 10mm not including wall DS55LR6 530 400 mount thickness DS55LT6 LR6 User Manual 9 P m 400 143 2 400 0 DS55LT6 5 ub kom zr e 4 1 a ir uM BN DS55LR6 ORE Lud Kul n V Qum A 400 0 800 0 D 0 Oo o oO 0 o 0 D 0 0 o A 400 0 800 0 7 fi ETT C Rv 7
15. irective 2006 95 EC Electromagnetic Compatibility Directive 2004 108 EC 60950 1 2005 1 27 Edition EN 60950 1 2006 1 2010 EN 55022 2006 1 2007 Class EN 61000 3 2 2006 1 2009 2 2009 EN61000 3 3 2008 EN55024 1998 A1 2001 A2 2003 EN61000 4 2 2009 EN61000 4 3 2006 A1 2008 A2 2010 EN61000 4 4 2010 EN61000 4 5 2006 EN61000 4 6 2009 EN61000 4 8 2010 DynaScan Technology Inc EN61000 4 11 2004 EN61000 4 11 2004 DS55LT6 LR6 User Manual 6 Getting Started Contents Confirm the accessories below are included with the display If any item is missing please contact your dealer The color and shape of the accessories may vary by product e DS55Lxx Professional LCD ePower cable x1 pcs e Remote Control x1 pcs eRS 232 cable x1 pcs e Batteries 1 5V x2 pcs e DVI cable x1 pcs e Quick Start Guide pcs eCD ROM pcs Attention Please use the following table to check whether the included power cord is suitable for your region If the power cord does not match your region please contact your local supplier Please use matching AC socket in order to meet local safety regulations Plug Type North America European Continental Plug Shape EU Region U S A Canada Japan Taiwan Except U K Voltage 120V 230V 100V 110V DS55LT6 LR6 User Manual 7 Installing and Replacing Remote Control Batteries 1 Open the battery compartment cover 2 Insert 2 new AAA batteries 3 Close the battery
16. l waste regulations Suitable for mounting on concrete or other non combustible surface only When a stationary or fixed image is displayed for a long time on the screen the image may be permanently imprinted on the screen This phenomenon is known as image burn in and is not covered by the manufacturer s warranty In order to avoid burn in avoid prolonged display of static or fixed images on the screen DS55LT6 LR6 User Manual 3 Important Safety Information Disassembling the LCD is strictly prohibited Opening the cover may expose the user to shock or other hazards Please contact DynaScan certified service professionals for all maintenance requirements Do not allow any liquid to enter the LCD Also avoid placing the LCD close to water sources Do not place heavy objects on the power cord A damaged power cord might cause electric shock or fire Do not bend curl or damage the power cord in other ways The power cord must comply with local safety regulations Do not damage or modify the prongs pins and the ground contact on the power plug Do no place the LCD on an unleveled surface or an unstable vehicle The LCD could fall over and cause substantial damage Do not cover the vents and or the heat sink Do not install the LCD beside radiators or other heat sources The installation site should have sufficient ventilation so the heat generated by the LCD can be dissipated Do not use the Signage in a hot humid dusty or fu
17. m number of columns in a daisy chain is 6 DS55LT6 LR6 User Manual 21 ROW POSITION Vertical position in video wall COLUMN POSITION Horizontal position in video wall Adjusts the contrast MODE 1 is the highest contras OFF LOCAL DIMMING is the lowest contrast Enables disables the ability to use the remote to control the Menu IR CONTROL Note When disabled the remote control function can be enabled again from the control panel on the Signage or through the Display Manager software Restores all settings to default RESET TO FACTORY DEFAULT Note Does not modify CURRENT TIME POWER ON TIME POWER OFF TIME SN XXXXXXXXXXXXX The Signage s serial number Some functions may not be available for all models DS55LT6 LR6 User Manual 22 Specifications LCD Panel Size 54 64 inches 1920 x 1080 Native Resolution Brightness 5000 cd m Typ 3 000 1 Static Contrast Ratio c 1 000 000 1 Dynamic 11 5 11 5 11 5 11 5 mm 26 5 26 5 26 5 26 5 mm DS55LT6 DS55LR6 Black DS55LT6 Bezel Width T B L R Cabinet Color 1241 x 712 x 126 mm MECHANICAL SPECS Monitor Dimension LxHxD w o Stand DS55LR6 1270 x 740 x 136 mm DS55LT6 65 kg 70 kg DS55LR6 71 kg 76 kg VESA Mounting Dimension 8 Holes 400x400 mm 800x400 mm USER INTERFACE OSD Language English Operation Temperature 0 C 40 ENVIRONMENT otorage Temperature 20 C 60
18. my environment Handle the LCD with care Save the packaging materials for the next transport Please clean the backside of the LCD at least once a month for dust and other particles Unplug the LCD immediately and contact a DynaScan certified service professional as soon as possible when any of the following situations occurs Damaged power cord or power plug If liquid or foreign objects has entered the LCD If the LCD has been exposed to rain or water If the LCD has been dropped or the casing has become damaged If you notice any structural damage such as cracks or unnatural vibration If the LCD cannot be operated following the steps outlined in this manual If the LCD emits smoke or other odors or generates strange noises Operating Suggestions Use a soft lint free cloth to gently wipe the screen panel while cleaning Avoid using any cleaning solution Avoid displaying a stationary image for a long period of time in order to prevent image sticking DS55LT6 LR6 User Manual 4 Cleaning the Panel Use a soft lint free cloth to gently wipe dust off the screen panel e Please do not use any hard material to wipe the panel Please do not poke the panel with your hand or any sharp object such as a pen or a nail or exert excessive pressure to the panel to prevent damage to the panel Please do not use any cleaning solution on the panel as it might cause discoloration Cleaning the Casing e Unplug the power
19. or remote control to display the OSD Use the navigation arrows to select and adjust menu items DISPLAY MODE LAN AUTO BRIGHTNESS OFF HIGH LEVEL 99 LOW LEVEL 90 COLOR TEMPERATURE Change the orientation of the Menu The Menu can be displayed in either LANDSCAPE or PORTRAIT mode Turn On Off auto brightness adjustment Note With AUTO BRIGHTNESS on the display brightness adjusts according to the ambient light bright the screen will adjust to the set HIGH LEVEL When ambient light is brightness value when ambient light is dark the screen will adjust to the set LOW LEVEL brightness value With AUTO BRIGHTNESS off screen brightness will remain at HIGH LEVEL set brightness value Adjusts the highest brightness level Range 0 99 Adjusts the lowest brightness level Range 0 99 Color temperature select 6500K and USER MODE Note COLOR TEMPERATURE function is not available for DS47LT3 CONTRAST 32 SCREEN SAVER OFF INTERVAL o min CURRENT TIME 00 00 NUMBER OF ROWS 1 NUMBER OF COLUMNS 1 Sets image burn in protection interval Set the clock Note The internal clock will continue to function when the power is turned off Turn on off automatic power schedule function Set turn on time Set turn off time Set video wall function oet number of rows in video wall Note The maximum number of rows in a daisy chain is 6 oet number of columns in video wall Note The maximu
20. worsen the situation Increase the inspection frequency on areas where previous maintenance had occurred to ensure the problems do not occur again DS55LT6 LR6 User Manual 12 Connecting To a Power Source Using the power cable provided insert the female connector into the back of the display shown the in the diagram below Connect the male end of the power cable to a 100 240 volt 50 60Hz AC power outlet Insert the plug completely into the socket A loose power connection may cause degradation to the image quality Connecting an External Video Source Turn OFF the power to both the LCD and the external video device Using the DVI cable provided insert one end into the DVI IN on the back of the display shown the in the diagram below Connect the other end of the DVI cable to the DVI output of the video source Refer to your video device s product manual for additional information gm eT jr Zug _ __ DVI Cable DS55LT6 LR6 User Manual 13 Connecting Multiple Displays for Video Wall Applications To daisy chain more than one display for a video wall application connect a video source to the first display in the chain Connect the DVI OUT of the 13 display to the DVI IN of the p display Using the RS 232 cable provided conn
Download Pdf Manuals
Related Search