Audio-Technica Pro 88W-830
Contents
1. Owners Manual PRO 88W VHF WIRELESS LAVALIER MICROPHONE SYSTEM audio technica Features and Controls The Audio Technica PRO 88W wireless microphone system is compact lightweight and compatible with nearly all video camcorders The PRO 88W operates in an authorized VHF band and has a useful range of up to 300 feet in line of sight applications Each PRO 88W system operates on two crystal controlled switch selectable frequencies for clear clean transmission There are 4 pairs of frequencies available Freq Code A Channel B Channel T13 T1 169 445 MHz T3 170 245 MHz T24 T2 169 505 MHz T4 170 305 MHz T57 T5 171 045 MHz T7 171 845 MHz T68 T6 171 105 MHz T8 171 905 MHz TVHF Ch 7 179 400 MHz Ch 8 180 600 MHz The Frequency Code appears on the back of each unit Both transmitter and receiver must have the same Frequency Code and both units must be set to either A or B TVHF frequencies are in television channel bands 7 and 8 Use whichever channel does not have an operating TV station in your area Note that two transmitters on the same frequency will not work with one receiver The PRO 88W is offered with a choice of cardioid or omnidirectional clip on microphones Each type offers distinct benefits cardioid microphones reduce room noise and allow a greater working distance than omnidirectional microphones omnidirectional microphones are less susceptible to wind and clo2. leakage the batteries should be removed if the PRO 88W will not be used for a long time Transmitter Operation Each unit provides two selectable transmitting frequencies 1 Switch the Channel Selector Switch to the desired channel A or B 2 The belt clip on the back of the unit clips the transmitter onto a belt or the transmitter simply can be put into a pocket 3 Plug the microphone into the Mic Input Jack 4 The microphone can be clipped to a necktie or other clothing using the supplied clothing clip 5 Slide the power ON OFF switch to the ON position the LED indicator will light Receiver Operation Each unit provides two selectable receiving frequencies 1 Switch the Channel Selector Switch to the same channel as the one selected on the transmitter A or B 2 Attach the receiver to the video camcorder by inserting the mounting bracket foot into the camcorder s accessory shoe 3 Connect the mini plug audio signal cable from the Mic Out jack on the receiver to the external mic jack on the camcorder 4 Attach the monitor earphone to the Phone Out jack on the receiver to listen to the signal 5 Turn the Power ON OFF switch to the ON position the LED indicator will light Helpful Hints e f the selected channel is noisy switch both the transmitter and receiver to the other channel e lf there is a dead spot in a room indicated by noise on the external earphone try a slight change of position o
3. dans une large s lection de langue Para reducir el impacto al medioambiente y reducir la producci n de documentos en varios leguajes informaci n de nuestros productos est n disponibles en nuestra p gina del Internet www audio technica com Para reduzir o impacto ecol gico de um documento impresso de v rias linguas a Audio Technica provid ncia as informac es dos seus produtos em diversas linguas na www audio technica com Per evitare l impatto ambientale che la stampa di questo documento determinerebbe le informazioni sui prodotti sono disponibili online in diverse lingue sul sito www audio technica com Der Umwelt zuliebe finden Sie die Produktinformationen in deutscher Sprache und weiteren Sprachen auf unserer Homepage www audio technica com Om de gevolgen van een gedrukte meertalige handleiding op het milieu te verkleinen is productinformatie in verschillende talen on line beschikbaar op www audio technica com ADE RSE RAR ESS ES SCPE gt ARES ETE www audio technica com NE 7748 A bee Ar ae E BIE gt AA SEF BD IH BEM KANE SB a SORE IE ARA TE www audio technica com iy 75 PA W E XE PEAT ie a FU E o AA a At PARZE AN Sir Abe 4 T 135 as qq ARE www audio technica com 19 Aa 19 Ae So GREE LA Ved 2 x wa audio technica Audio Technica U S Inc 1221 Commerce Drive Stow Ohio 44224 Tel 330 686 2600 www audio technica com P52446 2013 Audio Technica U S Inc Printed in Taiwan
4. on 50 mA os m goth a Battery Life 8 hours nominal A a Dimensions 104 0 mm 4 09 H x Weight 80 g 2 8 0z without battery 62 0 mm 2 44 W x 24 0 mm 0 94 D Weight 100 g 3 5 oz without battery This device complies with part 15 of the FCC Rules Operation is subject to the condition that this device does not cause harmful interference A copy of the declaration of conformity can be found on the internet at www audio technica com This device complies with INDUSTRY CANADA R S S 210 en conformit avec IC RSS 210 CNR210 Operation is subject to the following conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference which may cause undesired operation Changes or modifications not expressly approved by Audio Technica could void your authority to operate this equipment U S One Year Limited End User Warranty Audio Technica PRO 88W wireless systems purchased in the U S A from an authorized Audio Technica A T U S dealer are warranted for one year from date of purchase by A T U S to be free of defects in materials and workmanship In event of a defect End User s exclusive remedy is at A T U S election the cost of repair refund of the purchase price in the form of credit or cash or replacement of the product The product must be delivered to A T U S or an Authorized Service Center pre paid together with the sales slip or other proof of purcha
5. r try changing frequencies e Low ceiling fluorescent lighting overhead telephone lines or close proximity to metal fences can all cause static If this occurs try a slight change of position and or try changing frequencies e When the battery voltage drops below 6V the LED indicator will go out This means you need a new battery e Turn off the power whenever the units are not in use Remove the batteries if the units will be out of service for a long time NOTE There are no user adjustable parts inside the transmitter or receiver Do not attempt to open or make any adjustments Mounting Belt Clip A detachable belt clip is included for convenience Slide the tapered end of the belt clip into the grooved area located on the back of the unit until it clicks into place PRO 88W receiver mounted to video camcorder accessory shoe or supplied Velcro tape Mounting on a Camera The receiver can be mounted to a video camcorder by means of the supplied mounting bracket Insert the head end of the bracket into the grooved area on the back of the receiver and then insert the foot end to the mounting shoe of the video camcorder You can also attach the receiver to the camcorder by using the included Velcro tape Remove the belt clip from the back of the receiver Without separating the two halves of the Velcro remove the protective paper from the hook half of the Velcro and press the exposed adhesive side agains
6. se date This warranty excludes defects due to normal wear abuse shipping damage or failure to use product in accordance with instructions This warranty is void in the event of unauthorized repair or modification or removal or defacing of the product labeling For U S service return instructions and procedure please go to www audio technica com service A T U S warranty is to the End User only Except for A T U S said express warranty A T U S MAKES NO WARRANTIES EXPRESS OR IMPLIED WITH RESPECT TO THE PRODUCTS A T U S SPECIFICALLY MAKES NO WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE Except to the extent precluded by applicable state law A T U S IS NOT LIABLE FOR CONSEQUENTIAL INCIDENTAL DIRECT OR SPECIAL DAMAGES ARISING DIRECTLY OR INDIRECTLY IN RESPECT OF SUCH PRODUCTS OR USE OR FAILURE THEREOF WHETHER BASED ON BREACH OF WARRANTY NEGLIGENCE STRICT LIABILITY TORT OR OTHERWISE This warranty gives you specific legal rights and you may have other rights which vary from state to state Outside the U S A please contact your local dealer for warranty details To reduce the environmental impact of a multi language printed document product information is available online at www audio technica com in a selection of languages Afin de r duire l impact sur l environnement de l impression de plusieurs langues les informations concernant les produits sont disponibles sur le site www audio technica com
7. t the back of the receiver Do not place it over the Frequency Code on the nameplate or the battery compartment cover Then without removing the protective paper from the other side hold the receiver plus Velcro against the camcorder to find a position with a sufficiently flat area that does not interfere with the camcorder viewfinder controls or hinge points Once you are satisfied with the position remove the remaining protective paper and press the pile half of the Velcro into place on the camcorder The double sided adhesive foam provided is only for permanent mounting of the receiver PRO 88W Specifications TRANSMITTER RECEIVER Operating Frequencies 113 169 445 MHz amp 170 245 MHz Operating Frequencies T13 169 445 MHz amp 170 245 MHz T24 169 505 MHz amp 170 305 MHz T24 169 505 MHz amp 170 305 MHz T57 171 045 MHz amp 171 845 MHz T57 171 045 MHz amp 171 845 MHz T68 171 105 MHz amp 171 905 MHz T68 171 105 MHz amp 171 905 MHz TVHF 179 400 MHz amp 180 600 MHz TVHF 179 400 MHz amp 180 600 MHz Modulation Frequency Modulation Reception System FM Superheterodyne Modulation Sensitivity 6 mV input for full deviation Reception Sensitivity 2 uV for 30 dB S N Battery 9V alkaline not included Output Connector 3 5 mm s TRS Current Consumption 50 mA DC Input 9V DC center positive Battery Life 8 hours nominal Battery 9V alkaline not included Dimensions 104 0 mm 4 09 H x Current Consumpti
8. thing noise and provide extended frequency response Cardioid PRO 88W System PRO 88W 829 includes AT829mW miniature cardioid clip on microphone Omnidirectional PRO88W Systems PRO 88W 830 includes MT830mW subminiature omnidirectional clip on microphone PRO 88W R35 includes ATR3350mW miniature omnidirectional clip on microphone Before use make certain you understand the function and operation of the system Flexible Antenna y Mini plug Receiver Monitor to V4 Earphone Adapter Audio Signal Cable Power ON Indicator Phone Out Jack Mic Out Jack Power ON OFF Switch Channel Selector Switch Mounting Bracket 9V DC Power Input Jack Battery Compartment Cover Transmitter Mic Input Jack Power ON Indicator Power ON OFF Switch Channel Selector Switch Belt Clip Battery Compartment Cover e Each PRO 88W system also includes an accessory microphone Operation Power Source The transmitter and receiver are each operated by a 9V alkaline battery Before use install a battery as shown Make certain the battery is fully seated in its compartment so the cover slides in place easily Battery life with alkaline batteries is approximately 8 hours of operating time The receiver also features an external jack for connecting a 9V DC power supply not includea Ribbon for battery removal 9V DC battery Battery compartment cover Note To avoid possible damage due to
Download Pdf Manuals
Related Search