Römer TRIFIX
Contents
1. Z Take the time to carefully read through these instructions and always keep them ready to hand in the designated pocket on the child seat A For the protection of all vehicle occupants e Use on the rear seat In the case of an emergency stop or an accident persons or objects which are not properly secured in the car can cause injury to other vehicle Move the front seat forward far enough that you child s feet cannot hit the backrest of the front seat to prevent risk of injury occupants For this reason please always check that The child safety seat can get hot in direct sunshine Caution Children s skin is delicate and could be injured as a result Protect the child e the backrests of the vehicle seats are locked e g that the latch on a folding rear seat bench is engaged seat against intensive direct sunlight when it is not currently in use e all heavy or sharp edged objects in the vehicle e g on the parcel shelf are secured e Only allow your child to enter and exit the vehicle on the pavement side e all persons in the vehicle have their seatbelts fastened e Make stops during longer journeys to give your child an opportunity to run about and play e the child safety seat is always secured in the car via the ISOFIX anchoring and the Top Tether even when there is no child in the seat To protect your vehicle For the protection of your child Some vehicle seat coverings made of more delicate materials e g velour2. covered by the warranty Fabrics All of our fabrics meet very high requirements with regard to colour fastness when exposed to UV radiation Nevertheless all fabrics fade when exposed to UV radiation This is not a material defect but rather a normal sign of wear which is not covered by the warranty Buckle Buckle malfunctions are often due to accumulations of dirt or foreign bodies which may stop the buckle from working properly If this happens the buckle can be cleaned olease follow the procedure described in your user instructions Please contact your retailer immediately in the event of a warranty claim He or she will give you the advice and support you need When processing claims product specific depreciation rates will be applied Please refer to our General Terms and Conditions which are available from your retailer Use care and maintenance The child safety seat must be used in accordance with the user instructions We point out expressly that only genuine accessories and replacement parts must be used BRITAX EXCELSIOR LIMITED 1 Churchill Way West Andover Hampshire SP10 3UW United Kingdom t 44 0 1264 333343 f 44 0 1264 334146 e helpline uk britaxeurope com www britax eu BRITAX ROMER Kindersicherheit GmbH Blaubeurer Stra e 71 D 89077 Ulm Germany t 49 0 731 9345 0 f 49 0 731 9345 210 e info de britaxeurope com www roemer eu 9 18kg SSS TRIFIX User Instructions
3. pressed e The buckle latches will no longer lock home i e they are ejected again if you try to push them in e The buckle latches engage without an audible click e The buckle latches are difficult to insert you feel resistance e The buckle only opens if extreme force is applied Remedy wash out the harness buckle so that it functions properly once again Cleaning the harness buckle 1 Open the harness buckle press the red button 2 Pull the elastic loop over the harness buckle 05 2 Open the Velcro fastener on the crotch pad and take off the crotch pad from the cover 3 Slide the metal plate which is used to fasten the harness buckle 05 to the seat shell up on its edge through the strap slot 6 4 Soak the harness buckle in warm water with dishwashing liquid for at least an hour Then rinse and dry it thoroughly Cleaning Please be sure to use only genuine Britax R MER replacement seat covers as the seat cover is an integral part of the child safety seat which plays an important role in ensuring that the system works properly Replacement seat covers are available from your retailer The child seat must not be used without its cover The cover can be removed and washed with a mild detergent using the washing machine s cycle for delicate items 30 C Please observe the instructions on the washing label of the cover The plastic parts can be cleaned using soapy water Do not use harsh
4. upper position cates they are fully engaged insert guides 2 until the locking pull the Top Tether 4A by the snap 3 Place the child safety seat facing arms engage with a clicking noise 6 Shake the child safety seat to hook until it makes a V shape The insert guides make it easier to install the child safety seat with the aid of the ISO in the direction of travel on the on both sides make sure it is safely attached FIX attachment points and prevent damage to the seat covering When not in use they vehicle seat Caution The locking arms are and re check to the ISOFIX indi should be removed and stored in a safe place On vehicles with a folding backrest the only correctly engaged if both cators 2 to make sure that both insert guides must be removed before the backrest is folded of the ISOFIX indicators a are of them are completely green Any problems which occur are usually caused by dirt or foreign objects on the insert guides and on the hooks Clean off any dirt or foreign objects to remedy this type of problem completely green n Vay D AU HIWA i 9 Hook the snap hook G into the 10 Tension the strap of the Top Fre caution Check tetihechid 13 Pull the shoulder straps 07 to A correctly adjusted headrest Ts Pull thie o ring ofthe head 49 Guide the two buckle latches 21 20 Pull on the adjusting strap Top Tether anchoring point recom Tether 14 until the tension safety seat is correctly attached one side and put the two bu
5. CTIONS Z To ensure the full protective effect of the child safety seat e In the event of an accident with an impact speed above 10 km h it is possible that the child safety seat may have been damaged but that the damage may not be immediately obvious In this case the child safety seat must be replaced Please dispose of it properly e Regularly check all important parts for damage Make sure that the mechanical components in particular are all in per fect working order e To prevent damage ensure that the child safety seat does not become jammed between hard objects car door seat runners etc e Always have the child safety seat checked if it has been da maged e g if it is dropped e Never lubricate or oil parts of the child seat Please observe the waste disposal regulations in your country Disposal of packaging Container for cardboard Residual waste thermal utilisation Plastic parts In accordance with the labelling in the designated container Container for metals Metal parts Buckle amp latch Residual waste USE IN THE VEHICLE Please observe the instructions on the use of child restraint systems described in your vehicle owner s manual The seat may be used in all vehicles equipped with the ISOFIX and Top Tether anchoring systems Please consult your vehicle owner s manual for information about the Top Tether anchoring points and the seats which are approved for child safety seats in the weight cl
6. PRODUCT OVERVIEW 7a ISOFIX attachment points car Shoulder straps ISOFIX insert guides Adjusting button Headrest Adjustment strap Harness retainer Recline handle Harness buckle Shoulder pads 2 ISOFIX indicators Tested and certified according BRITAX ROMER to ECE R 44 04 child safety seat Group Body weight TRIFIX 1 9 bis 18 kg seat or toy in the home ECE European Standard for Child safety Equipment 4 ISOFIX unlocking buttons The child safety seat has been designed tested and certified according to the requirements of the European Standard for Child Safety Equipment ECE R 44 04 The test mark E in a circle and the certification number are located on the orange certification sticker sticker on the child safety seat This certification will be invalidated if you make any modifications to the child safety seat The TRIFIX child safety seat must only be used to secure your child in the vehicle It must never be used as a 43 Adjusting ring of the headrest Top Tether 45 User guide compartment Fabric loop 47 ISOFIX locking arms Seat shell CARE AND MAINTENANCE Care for the harness buckle It is vital for the safety of your child that the harness buckle works correctly Malfunctions of the harness buckle are usually caused by accumulations of dirt or foreign bodies e The buckle latches are ejected only slowly when the red release button is
7. ass 9 18 kg In the direction of travel Yes Against the direction of travel No On seats featuring ISOFIX attachments between seat surface and backrest and Top Tether anchoring points for example on the parcel shelf on the floor or behind the backrest Yes 2 Please observe the applicable regulations in your country 1 Use is permitted on a rearward facing vehicle seat e g in a van or minibus only if the vehicle seat is also approved for use by adults The seat must not be positioned anywhere where it is in range of an airbag which is being deployed 2 If there is a front airbag Slide the passenger seat a long way back and refer to any instructions in vehicle owner s manual NEXT CHILD SAFETY SEATS BRITAX ROMER Testing and certification in accordance with ECE R 44 04 Child safety seats Group Body weight KID 2 3 15 36 kg KID plus 2 3 15 36 kg KIDFIX 2 3 15 36 kg KIDFIX SICT 2 3 15 36 kg TWO YEAR WARRANTY For this child safety seat we offer a 2 year warranty against manufacturing or material defects The warranty period is effective from the day of purchase The warranty covers only child safety seats which have been handled properly and which have been sent to us in a clean and proper condition The Warranty does not cover e natural signs of wear and damage resulting from excessive stress damage resulting from inappropriate or improper use What is
8. ckle ensures optimal protection for your rest 43 Upwarcs together and engage them before until the harness lies flat and mended in your vehicle owner s indicator 7 turns green and the 11 Press the adjusting button latches 21 into the harness child in the safety seat 48 Movethe head tt th putting them into the harness is close against your child s guide Top Tether 14 is tightly tensioned and at the same time pull both retainer The headrest 03 must be adjusted peas A pei an oa buckle 05 this should make a body shoulder straps 07 forwards so that the shoulder straps 07 are at Sheek nel iiS oro se a pe clicking noise Caution Do not pull on the shoul Eo P a ee is We ales i your child s shoul by lightly sliding the head rest 3 caution Pull out the adjus olded forwards and place your ers or slightly above der pads 08 child in the child safety seat downwards ting strap to the front 12 Open the harness buckle A Caution The hip straps press the red button 15 Put the shoulder straps 07 over must be positioned as low as the shoulders of your child possible over your child s hips Caution The shoulder straps must not be twisted or swapped Z For the safety of your child before every journey in the car check that Removing the child safety seat with ISOFIX e the child safety seat is engaged on both sides with the ISOFIX locking arms 7 in the ISOFIX attachment points and that both ISOFIX 1 Loosen the Top Tethe
9. cleaning agents such as solvents The harnesses can be washed in lukewarm soapy water Caution Never remove the buckle latches 1 from the straps The shoulder pads can be washed in lukewarm soapy water Removing the cover Nic Press the recline handle upwards and slide the seat shell to the rear into the upright position Loosen the harness straps as far as possible Open the harness buckle 05 press the red button Open the Velcro fastener on the crotch pad 20 Slide the headrest 03 to its lowest position Remove the cover of the headrest 81 Open the poppers on the left and right of the rear part of the cover Fold the rear part of the cover onto the seat surface Thread the harness straps through the cutout in the cover 10 Unhook both of the elastic hoops at the rear upper edge of the seat shell 11 Unhook the elastic seam of the cover under the edge of the seat shell TIP Start at the handles on the side and at the upper edge of the seat shell 12 Pull the cover up and over the bezel of the strap adjuster 13 Feed out the harness buckle and the end of the strap from the cover 14 Pull the cover upwards a little and then put it with the cutout over the head rest 03 Re fitting the Cover Simply follow the steps in the opposite order Caution Check that the harness straps are not twisted and that they have been correctly inserted in the belt slots on the cover 9 OND OP ON CARE INSTRU
10. leather etc may develop wear marks when child seats are used e The more snugly the harness fits over your child s body the safer your child will be For optimum protection of your seat covers we recommend using the BRITAX ROMER Car Seat Protector which is available from our range e Please do not ever leave your child unattended in the child safety seat in the vehicle of accessories INSTALLATION Preparatory work oora oe 1 If your vehicle is not equipped with the ISOFIX insert guides as standard clip the two insert guides 02 which are included with the seat with the cut out facing upwards onto the two ISOFIX attach ment points 01 of your vehicle A 1 Pull the grey fabric loop 46 to pull 2 Take the Top Tether 14 from the 4 Grasp the child safety seat with 5 Push the child safety seat with a 7 Take the Top Tether 14 and press 8 Guide the Top Tether 14 on the TIP The ISOFIX attachment points are located between the surface out both locking arms 47 until you user guide compartment 15 and both hands and slide the two substantial amount of force as far the metal tongue 28 away from left and right hand sides past the and the backrest of the vehicle seat 7 hear a clicking sound which indi lay it over the child safety seat locking arms 17 firmly into the back as it will go the strap to lengthen the strap and h ead st 2 Move the head restraint on the vehicle seat to the
11. r indicators 12 are completely green 2 Unhook the snap hook 26 from the anchoring point and lay the Top Tether 14 to the front over the child safety seat e the child safety seat is securely fastened 3 Press on the grey ISOFIX unlocking buttons on the left and right hand side of the seat shell 18 e the Top Tether 14 is tightly tensioned over the backrest of the car seat and the tension indicator 27 is green gt The ISOFIX locking arms a7 will release and the two ISOFIX indicators a will change colour to red e the straps of the child safety seat are close to the body without constricting the child 4 Pull the seat forwards and stow the Top Tether 14 back in the user guide compartment 15 e the shoulder straps 07 are correctly adjusted and the straps are not twisted 5 Slide the ISOFIX locking arms 17 back into the seat shell e the shoulder pads are in the right position on your child s body gt A rattling noise is produced when the locking arms are pushed back in e the buckle latches 21 are engaged in the harness buckle 08 TIP The locking arms are protected against damage when they are pushed back into the seat base Caution If your child attempts to open the grey ISOFIX locking buttons ad or the harness buckle YY make sure to stop at the earliest op portunity Check that the child safety seat is correctly attached and make sure that your child is properly secured Teach your child about the A Caution Remove the child safety
12. seat from the vehicle The child safety seat must never be transported in the car if it is not properly secured dangers involved
Download Pdf Manuals
Related Search