American Weigh Scales FW-ZX4-650
Contents
1. 300ct 925 9gn 250g 8 8180z 8 0380zt 19 290zt 160 8dwt 385dwt Resolution 0 01g 0 1g 0 010z 0 1g 0 010z 0 0010z 0 1dwt 0 1dwt 0 05ct 0 1gn 0 010zt 0 01o0zt Repeatability 0 01g 0 1g 0 1g two CR2032 Batteries Troubleshooting H Overload E or no display Replace batteries OUT2 Out of Calibration 600g 21 160z CAST D WEIGH ZX 5t RIE 5 DIGITAL POCKET SCALE zx MAX d i MODE owon C ZX 60 60 x 0 01g ZX 250 250 x 0 1g ZX 600 600 x 0 1g Thank you for purchasing the ZX Series Digital Pocket Scale from Fast Weigh Please read all operating in structions carefully before use IMPORTANT 1 Operate scale on a hard flat surface free from any vibration 2 Strong electrical currents and mag netic fields can interfere with weigh ing Keep mobile phones and other radio devices at least 10 feet away during use 3 Avoid extreme changes in tempera ture 4 Do not dismantle the scale as this will void your warranty 5 Clean scale using a mild detergent 6 This scale is for personal use only it is not legal for trade Battery Uses two 3 volt CR2032 lithium button cell batteries To install batteries re move the battery cover and insert two CR2032 batteries Replace the battery cover and scale is ready to operate e DO NOT USE EXCESSIVE FORCE when removing or replacing the bat2. also achieve the same results by placing a tray or container on the platform with the scale off then turn the scale on It will read zero automatically 2 If you then remove the container the display will show the containers weight as a negative value Press TARE again to return the scale to zero 3 After turning on the scale or during the course of weighing if the display does not
3. show 0 0 or 0 00 press the TARE key to restore it to 0 0 or 0 00 Auto Off 1 This scale features an auto off func tion If no activity takes place on the scale for 30 seconds the scale will turn off automatically 2 To manually shut off the scale press the ON OFF button Calibration Instructions This scale has been calibrated at the factory However shock caused by extreme changes in temperature humidity and elevation can cause the scale to lose calibration Always use the correct calibration weight for your scale ZX 60 50 Gram Calibration Weight ZX 250 200 Gram Calibration Weight ZX 600 500 Gram Calibration Weight Calibration weight is not included 1 With the scale off first press and hold the MODE key With the MODE key still depressed tap the ON OFF button The display will show a number You may now release both keys 2 Press the ON OFF key again The LCD will display ZERO then the required calibration weight value ie 50g 500g 3 Place the required weight onto the platform and press ON OFF again The LCD will display PASS Calibration is complete Note If the standard calibration weight is not used the calibration may not finish automatically or the recalibration may not be accurate Check your scale supplier for calibration weight availability Technical Specifications ZX 60 ZX 250 ZX 600 Capacity 60g 2 1160z
4. tery cover e Remove the batteries if the scale is to be stored for over a month Function Keys ON OFF Press this button to turn on or off the scale MODE Press this button to change weighing modes also used in calibration see Calibration TARE Press this button to subtract the weight of a vessel or container returns the scale to zero Weighing 1 It is suggested that you warm the scale up before use by turning it on for 20 sec onds and then turning it off again Turn the scale on once more to use 2 After the display flashes for 2 or 3 sec onds it will show 0 0 or 0 00 and the scale is ready for use 3 To change weighing units press the MODE key The units will cycle through as follows g oz dwt ozt g oz ct gn for ZX 60 4 Do not place objects exceeding the capacity of the scale on the weighing platform or the scale will read H Dam age caused by overload is not covered by the warranty 5 Items being weighed should not be left on the platform for longer than 5 seconds or else the accuracy of the next item to be weighed is affected Tare Tare weighing allows you to subtract the weight of a container to obtain the weight of its contents only net weight 1 After turning on the scale and waiting for the display to show 0 0 or 0 00 place a tray or container on the weigh ing platform Press the TARE button to return the scale to zero You can
Download Pdf Manuals
Related Search