American Weigh Scales 330LPG personal scale
Contents
1. A 330LPG Bathroom Scale 330lb x 0 2lb 150kg x 0 1kg 330LPG Manual Thank you for purchasing the American Weigh 330LPG Bathroom Scale Please read all operating instructions carefully before use Scales are precision instruments and should always be handled with proper care To ensure years of reliable service keep these simple tips in mind Do not exceed the scales maximum capacity Overloading your scale can permanently damage it e Avoid exposure to extreme heat or cold Scales perform best at normal room temperature If temperatures have changed dramatically recalibration may be necessary Store your scale in a clean dry location Dust dirt and moisture can accumulate on the weighing sensors and electronics causing innacuracy or malfunction e Avoid using your scale in close proximity to strong radio wave emitting devices such as cordless phones Always weigh on a flat and level surface free from vibrations and drafts The corner of a room is usually the most stable e Avoid dropping your scale The warranty does not cover damage due to rough treatment or overload To avoid slipping do not step on the scale with wet feet Do not use the scale on carpet l Display Overview Weight Uf lt ep Weighing Unit ll Battery Installation This scale should come with the battery already installed However you must remove the plastic insulator strip before first use To install the battery tur2. atteries A D 1 x CR2032 Battery included American Weigh Scales Inc 2 Carriage Ln Suite 2 Charleston SC 29407 Tel 866 643 3444 toll free Fax 843 225 7284
3. n the scale over and remove the battery cover Insert one 1 CR2032 battery according to the diagram below Replace the battery cover EAD S Ill Turning the Scale On and Off This scale has an Auto On and Auto Off feature The scale will automatically turn on when the user steps on the platform and automatically turn off after the user steps off the platform This scale is ready to weigh and does not require tapping first before stepping on the scale IV Changing Weighing Units To change the current weighing unit use the UNIT button on the bottom side of the scale Notice the display will change between kg st lb and Ib with each button press Battery Unit Case V Weighing Once you have chosen the desired weighing unit see above step onto the scale to activate the Auto On feature The display will begin to flash then lock the weight on the display once the weight is stable The scale will turn off automatically after 10 seconds Notes Do not leave items on the scale when not in use If moving the scale around please first allow the display to turn off once before stepping on This will allow the zero point to be re established Otherwise the weight of the scale may be reflected in your results VI Troubleshooting Problem The display shows Solution The scale is overloaded Remove the excess weight Problem The display shows Lo Solution Battery power is low Replace the b
Download Pdf Manuals
Related Search