Philips SB170
Contents
1. cause interference Connect a Bluetooth device Connect a Bluetooth device to this product and then you can stream audio to this product through Bluetooth Connect manually d Press SOURCE SET to switch this product to Bluetooth mode L gt The Bluetooth indicator blinks on the display panel 2 On your Bluetooth device enable the Bluetooth feature and search for devices 3 In the device list select PHILIPS SB170 L Ifthe Bluetooth connection is established this productbeeps twice and the Bluetooth indicator turns solid 4 Play audio on your Bluetooth device L gt Audio comes out from this product Connect easily by NFC If your Bluetooth device supports NFC Near Field Communication you can connect it with this product easily 1 Press SOURCEISET to switch this product o Bluetooth mode 2 On your device enable NFC and Bluetooth functions 3 Tap the back of your Bluetooth device on he NFC tag on this product EN 5 4 On your Bluetooth device follow the on screen instructions to complete the pairing and connection Disconnect a device On your device disable the Bluetooth connection with this product Note e Before connecting another Bluetooth device disconnect the current device first Reconnect a device e Fora paired Bluetooth device on which the automatic reconnection is enabled this product reconnects with it once it is detected e Fora pair2. 4 Press TUNE TIME or TUNE TIME to select an alarm source and then press SOURCE SET to confirm e TUNE the last listened FM radio station e BUZ the buzzer 5 Press TUNE TIME or TUNE TIME to set the alarm volume and then press SOURCE SET to confirm L gt The alarm time and icon are displayed Activate deactivate alarm timer 1 Press AL1 AL2 to view alarm settings 2 Press AL1 AL2 again to activate or deactivate the alarm timer L gt The alarm icon appears if alarm timer is on and disappears if it is off e To stop the ringing alarm press the corresponding AL1 AL2 L gt The alarm repeats ringing for the next day Snooze alarm When alarm sounds press SNOOZE L gt The alarm snoozes and repeats ringing nine minutes later Set the sleep timer This product can switch to standby mode automatically after a preset period Press SLEEP repeatedly to select the sleep timer period in minutes L gt When the sleep timer is activated zZ appears To deactivate the sleep timer Press SLEEP repeatedly until OFF off appears 15 gt 30 gt 60 gt 90 gt 120 t oFF Adjust display brightness Press BRIGHTNESS repeatedly to select different brightness levels 9 Product information Note e Product information is subject to change without prior notice General information AC Power Model AS100 050 AA200 Input 100 240V 50 60 Hz 0 5 A Ou
3. clock 1 n standby mode press and hold SOURCE SET for two seconds L gt Hour digits begin to blink 2 Press TUNE TIME or TUNE TIME repeatedly to set the hour Press SOURCE SET to confirm L gt Minute digits begin to blink UJ Press TUNE TIME or TUNE TIME repeatedly to set the minute Press SOURCE SET to confirm L gt 12H or 24H begins to blink Press TUNE TIME or TUNE TIME to select a time format e 12H 12 hour time format 24H 24 hour time format 7 Press SOURCEISET to confirm L gt The set time is displayed anon wn A 4 Use Bluetooth devices With this product you can enjoy audio from a connected Bluetooth device WOOxX Innovations does not guarantee the compatibility with all Bluetooth devices e Before pairing a device with this product read its user manual for Bluetooth compatibility Make sure that the connected Bluetooth device supports the Advanced Audio Distribution Profile A2DP and the Audio Video Remote Control Profile AVRCP e The product can memorize a maximum of 4 paired devices e Make sure that Bluetooth function is enabled on your device and your device is set as visible to all other Bluetooth devices e The operational range between this product and a Bluetooth device is approximately 10 meters 30 feet e Any obstacle between this product and a Bluetooth device can reduce the operational range e Keep away from any other electronic device that may
4. or other external audio devices e listen to FM radio e charge your USB devices and e wake up to buzzer alarm or radio e The type plate is located on the bottom of the product What s in the box Check and identify the contents of your package e Main unit e Power adaptor Short user manual EN 3 3 Get started Always follow the instructions in this chapter in sequence Connect power Caution e Risk of product damage Make sure that the power supply voltage matches the voltage printed on the bottom of this product e Risk of electric shock When you unplug the AC power adaptor always pull the plug from the socket Never pull the cord Connect the AC power adaptor between e the DC IN socket at the back of this product and e the power supply Turn on Press POWER L gt The product switches to the last selected source Switch to standby mode Press POWER again to switch the product to standby mode L gt The clock if set is displayed Select a source Press SOURCE SET to select a source e Bluetooth mode Bluetooth indicator lights up e FM preset mode PXX is displayed with XX blinking XX indicates the preset number of the current station and then he current station is broadcast with its frequency displayed e FM mode The frequency of current station is displayed e AUDIO IN mode AUX is displayed Set the
5. sure that the Bluetooth connection is valid between your Bluetooth device and his product Clock setting erased Power has been interrupted or the power adapter has been disconnected e Reset the clock About Bluetooth device The audio quality is poor after connection with a Bluetooth enabled device e The Bluetooth reception is poor Move the device closer to this product or remove any obstacle between them Cannot connect with the device e The Bluetooth function of the device is not enabled Refer to the user manual of the device for how to enable the function e This product is already connected with another Bluetooth enabled device Disconnect that device and then try again The paired device connects and disconnects constantly e The Bluetooth reception is poor Move the device closer to this product or remove any obstacle between them For some devices Bluetooth connection may be deactivated automatically as a power saving feature This does not indicate any malfunction of this product 11 Notice Any changes or modifications made to this device that are not expressly approved by WOOX Innovations may void the user s authority to operate the equipment Compliance Notice for the USA and Canada This device complies with Part 15 of the FCC Rules and RSS standard of Industry Canada Operation is subject to the following two conditions d this device may not cause harmf
6. Always there to help you Register your product and get support at www philips com welcome iS i asjujeyals SB1 70 Contact Philips User manual PHILIPS Contents 1 Important 2 Know these safety symbols 2 Important safety instructions 2 2 Your product 3 Introduction 3 What s in the box 3 3 Get started 4 Connect power 4 Turn on 4 Select a source 4 Set the clock 4 4 Use Bluetooth devices 5 Connect a Bluetooth device 5 Disconnect a device 6 Reconnect a device 6 Clear pairing history 6 5 Charge through USB socket 6 6 Listen to FM radio 7 Store radio stations 7 Tune to a radio station 7 7 Play from an external device 8 8 Other features 8 Set an alarm timer 8 Set the sleep timer 9 Adjust display brightness 9 9 Product information 9 General information 9 Bluetooth 9 Tuner FM 10 Amplifier 10 Speakers 10 10 Troubleshooting 10 General 10 About Bluetooth device 11 11 Notice 11 Compliance 11 Disposal of your old product 12 Trademark notice 12 Copyright 12 EN 1 Important Know these safety symbols CAUTION AUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This bolt of lightning indicates uninsulated material within your unit may cause an electric shock For the safety of everyone in your house
7. duct cosmetic appearance items due to normal wear and tear unauthorized repair or other cause not within the control of Philips Damage or claims for products not being available for use or for lost data or lost software Damage from mishandled shipments or transit accidents when returning product to Philips A product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed manufactured approved and or authorized or repair of products damaged by these modifications A product used for commercial or institutional purposes including but not limited to rental purposes Product lost in shipment and no signature verification receipt can be provided Failure to operate per Owner s Manual TO OBTAIN ASSISTANCE IN THE U S A CANADA PUERTO RICO OR U S VIRGIN ISLANDS Contact Philips Customer Care Center at 1 866 309 0845 REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON SUMER PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDEN TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD UCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY Some states do not allow the exclusions or limitation of inciden tal or consequential damages or all
8. ed Bluetooth device that does not support the automatic reconnection reconnect it with this product manually Clear pairing history In Bluetooth mode press and hold POWER for 5 seconds 5 Charge through USB socket You can connect your USB device to this product for charging 1 Connect a USB cable between e the USB socket on the back of this product and e the USB socket on your USB device 2 Connect this product to power L gt Once the USB device is recognized the charging starts Note e The USB socket is used for charging only 6 Listen to FM radio Note Keep the antenna as far as possible from TV VCR or other radiation sources For better reception fully extend the antenna and adjust its position This product can store a maximum of 20 FM radio stations Store radio stations Store radio stations automatically For the first time when you switch the source to FM preset mode the product starts to store radio stations automatically To re scan for radio stations afterwards switch the source to FM mode and then press and hold SOURCE SET for 2 seconds Store radio stations manually 1 uw In FM preset mode press and hold TUNING TIMEorTUNING TIME for 2 seconds to tune to a radio station Press and hold SOURCE SET for 2 seconds L gt PXX is displayed with the preset number XX blinking Press TUNING TIME or TUNING TIME to select a preset numb
9. een damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 3 Apparatus shall not be exposed to dripping or splashing Do not place any sources of danger on the apparatus e g liquid filled objects lighted candles 45 This product may contain lead and mercury Disposal of these materials may be regulated due to environmental considerations For disposal or recycling information please contact your local authorities or the Electronic Industries Alliance www eiae org Where the plug of the Direct Plug in Adapter is used as the disconnect device the disconnect device shall remain readily operable PN warnine 2 Your product e Never remove the casing of this apparatus e Never lubricate any part of this apparatus e Never place this apparatus on other electrical Congratulations on your purchase and equipment aa e Keep this apparatus away from direct sunlight naked welcome to Philips To fully benefit from the flames or heat support that Philips offers register your product e Make sure that you always have easy access to the power cord plug or adaptor to disconnect the apparatus from the power at www philips com welcome Introduction Note With this product you can e enjoy audio from your Bluetooth devices
10. er for the current station Press SOURCE SET to confirm Repeat the steps above to store more stations e To listen to a preset station press TUNING TIME or TUNING TIME repeatedly until its preset number is displayed Tune to a radio station To tune to the previous or next strong station press and hold TUNING TIME or TUNING TIME for 2 seconds To tune to a specific station switch the source to FM mode and then press TUNING TIME or TUNING TIME repeatedly until its frequency is displayed EN 7 7 Play from an external device Through an audio input cable you can play audio that is transferred from an external audio device for example an MP3 player 1 Connect an audio input cable with a 3 5 mm connector on both ends between e the AUDIO IN socket on this product and e the headphone socket of an external device 2 Press SOURCE SET to switch the product to the AUDIO IN mode 3 Play audio on the external device refer its user manual O 8 Other features Set an alarm timer Note e Make sure that you have set the clock correctly d Press and hold AL1 AL2 for 2 seconds to activate alarm setting L gt The hour digits blink 2 Press TUNE TIME or TUNE TIME repeatedly to set the hour and then press SOURCE SET to confirm L gt The minute digits blink 3 Press TUNE TIME or TUNE TIME repeatedly to set the minute and then press SOURCE SET to confirm
11. h SIG Inc and any use of such marks by WOOX Innovations is under license mNntc The N Mark is a trademark or registered trademark of NFC Forum Inc in the United States and in other countries Copyright 2013 WOOX Innovations Limited All rights reserved Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N V and are used by WOOX Innovations Limited under license from Koninklijke Philips N V Specifications are subject to change without notice WOOX reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly PHILIPS LIMITED WARRANTY ONE 1 YEAR WARRANTY COVERAGE PHILIPS warranty obligation is limited to the terms set forth below WHO IS COVERED Philips warrants the product to the original purchaser or the per son receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase Warranty Period from an Authorized Dealer The original sales receipt showing the product name and the purchase date from an authorized retailer is considered such proof WHAT IS COVERED The Philips warranty covers new products if a defect in material or workmanship occurs and a valid claim is received by Philips within the Warranty Period At its option Philips will either 1 repair the product at no charge using new or refurbished replacement parts or 2 exchange the prod
12. h the bundled product Philips is not liable for any damage to or loss of any programs data or other information stored on any media contained within the product or any non Philips product or part not covered by this warranty Recovery or reinstallation of programs data or other information is not covered under this Limited Warranty This warranty does not apply a to damage caused by accident abuse misuse neglect misapplication or non Philips product b to damage caused by service performed by anyone other than Philips or Philips Authorized Service Location c to a product or a part that has been modified without the written permission of Philips or d if any Philips serial number has been removed or defaced or e product accessories or consumables sold AS IS without warranty of any kind by including refurbished Philips product sold AS IS by some retailers This Limited Warranty does not cover Shipping charges to return defective product to Philips Labor charges for installation or setup of the product adjust ment of customer controls on the product and installation or repair of antenna signal source systems outside of the product Product repair and or part replacement because of improper installation or maintenance connections to improper voltage supply power line surge lightning damage retained images or screen markings resulting from viewing fixed stationary con tent for extended periods pro
13. hold please do not remove product covering The exclamation mark calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems WARNING To reduce the risk of fire or electric shock this apparatus should not be exposed to rain or moisture and objects filled with liquids such as vases should not be placed on this apparatus CAUTION To prevent electric shock fully insert the plug For regions with polarized plugs To prevent electric shock match wide blade to wide slot Important safety instructions Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth QOOOO09 Do not block any ventilation openings Install in accordance with the manufacturer s instructions N EN Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer a Unplug this apparatus during lightning storms or when unused for long periods of time O Refer all servicing to qualified service personnel Servicing is required when the apparatus has b
14. lled and operated to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter Installers must ensure that 20cm separation distance will be maintained between the device excluding its handset and users Disposal of your old product Your product is designed and manufactured with high quality materials and components which can be recycled and reused ever dispose of your product with other household waste Please inform yourself about the local rules on the separate collection of electrical and electronic products and batteries The correct disposal of these products helps prevent potentially negative consequences on the environment and human health Please visit www recycle philips com for additional information on a recycling center in your area Environmental information All unnecessary packaging has been omitted We have tried to make the packaging easy to separate into three materials cardboard box polystyrene foam buffer and polyethylene bags protective foam sheet Your system consists of materials which can be recycled and reused if disassembled by a specialized company Please observe the local regulations regarding the disposal of packaging materials exhausted batteries and old equipment 12 EN Trademark notice The Bluetooth word mark and logos are registered trademarks owned by Bluetoot
15. ow limitations on how long an implied warranty lasts so the above limitations or exclusions may not apply to you This warranty gives you specific legal rights You may have other rights which vary from state province to state province P amp F USA Inc PO Box 2248 Alpharetta GA 30023 2248 3140 035 51091 13 PHILIPS P amp F USA Inc PO Box 2248 Alpharetta GA 30023 2248 Phone 1 866 309 0845 Meet Philips at the Internet http www philips com welcome Specifications are subject to change without notice 2013 WOOX Innovations Limited All rights reserved This product was brought to the market by WOOX Innovations Limited or one of its affiliates further referred to in this document as WOOX Innovations and is the manufacturer of the product WOOxX Innovations is the warrantor in relation to the product with which this booklet was packaged Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N V B170_37_UM_V1 0
16. tput 5 V 2 0 A Operation Power lt 15W Consumption Standby Power lt 1W Consumption Max load of USB BY ESTA output Dimensions Main Unit 137 x 62 x 141 mm WxHxD Weight With Packing 0 87 kg Main Unit 0 53 kg Bluetooth Bluetooth V2 1 specification Supported profiles A2DP V1 0 AVRCP V1 0 Range 10 m Free space EN 9 Tuner FM Tuning Range 87 5 108 MHz Sensitivity Mono 26dB S N lt 22 dBf Ratio Search Selectivity gt 28 dBf Total Harmonic lt 3 Distortion Signal to Noise Ratio gt 50 dB Amplifier Rated Output Power 2 X 2 5W RMS Speakers Speaker impedance 4 Ohm Speaker driver 1 5 full range 10 Troubleshooting Warning e Never remove the casing of this product To keep the warranty valid never try to repair the product yourself If you encounter problems when using this device check the following points before requesting service If the problem remains unsolved go to the Philips Web page www philips com support When you contact the Consumer Care make sure that the product is nearby and the model number and serial number are available General No power e Make sure that the AC power adaptor is connected properly e Make sure that there is power at the AC outlet No sound or poor sound e Adjust the volume of this product and the connected device e Make
17. uct with a product that is new or which has been manufactured from new or ser viceable used parts and is at least functionally equivalent or most comparable to the original product in Philips current inventory or 3 refund the original purchase price of the product Philips warrants replacement products or parts provided under this warranty against defects in materials and workmanship from the date of the replacement or repair for ninety 90 days or for the remaining portion of the original product s warranty whichever provides longer coverage for you When a product or part is exchanged any replacement item becomes your property and the replaced item becomes Philips property When a refund is given your product becomes Philips property Note Any product sold and identified as refurbished or renewed carries a ninety 90 day limited warranty Replacement product can only be sent if all warranty requirements are met Failure to follow all requirements can result in delay WHAT IS NOT COVERED EXCLUSIONS AND LIMITATIONS This Limited Warranty applies only to the new products manu factured by or for Philips that can be identified by the trademark trade name or logo affixed to it This Limited Warranty does not apply to any non Philips hardware product or any software even if packaged or sold with the product Non Philips manufacturers suppliers or publishers may provide a separate warranty for their own products packaged wit
18. ul interference and 2 this device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules and ICES 003 of Industry Canada These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with he instruction manual may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged o try to correct the interference by one or more of the following measures e Relocate the receiving antenna e Increase the separation between equipment and receiver EN 11 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help RF Radiation Exposure Statement This equipment complies with FCC s and IC s RF radiation exposure limits set forth for an uncontrolled environment The antenna s used for this transmitter must be insta
Download Pdf Manuals
Related Search