Philips MCM1150
Contents
1. signs aligned as indicated 5 14 EN e Replace the battery e Aim the remote control directly at the sensor on the front of the unit No disc detected e Insert a disc e Check if the disc is inserted upside down e Wait until the moisture condensation at the lens has cleared e Replace or clean the disc e Use a finalized CD or correct format disc Cannot display some files in USB device e The number of folders or files in the USB device has exceeded a certain limit This phenomenon is not a malfunction e The formats of these files are not supported USB device not supported e The USB device is incompatible with the unit Try another one Poor radio reception e Increase the distance between the unit and your TV or VCR e Fully extend the FM antenna Timer does not work Set the clock correctly Switch on the timer Clock timer setting erased e Power has been interrupted or the power cord has been disconnected Reset the clock timer 9 Notice Any changes or modifications made to this device that are not expressly approved by WOOX Innovations may void the user s authority to operate the equipment Your product is designed and manufactured with high quality materials and components which can be recycled and reused ever dispose of your product with other household waste Please inform yourself about he local rules on the sep2. exclamation mark calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the device Only use attachments accessories specified by the manufacturer Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the device When a cart is used use caution when moving the cart device combination to avoid injury from tip over Unplug this device during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the device has been damaged in any way such WARNING To reduce the ris k of fire or electric shock the device should not be exposed to rain a 77 iquid has been fallen into the d power supply cord or plug is damaged spilled or objects have evice the device has been or moisture and objects filled with liquids such as vases should not be placed on the device CAUTION To prevent electric shock fully insert the plug For regions with polarized plugs To prevent electric shock match wide blade to wide slot Important Safety Instructions e Follow all instructions e Heed all warnings e Do not use this device near water e
3. Press kK BP to select a track and then press PROG to confirm Repeat steps 2 to 3 to program more racks mn A WwW N Press PI to play the programmed tracks L gt During play PROG program is displayed e To erase the program in the stop position press ll EN 9 5 Listen to the radio Tune to a radio station Tip e Position the antenna as far as possible from TV VCR or other radiation source e For optimal reception fully extend and adjust the position of the antenna Press FM to select FM source Press and hold lk gt gt I for more than two seconds L gt The radio tunes to a station with strong reception automatically N ea 3 Repeat step 2 to tune to more stations To tune to a weak station Press iq PPI repeatedly until you find optimal reception Program radio stations automatically Note You can program a maximum of 20 preset radio stations FM In tuner mode press and hold PROG for more than two seconds to activate automatic programming Ly All available stations are programmed in the order of waveband reception strength L gt The first programmed radio station is broadcast automatically Program radio stations manually 1 Tune to a radio station 2 Press PROG and then press amp W to select a number from 1 20 3 Press PROG to confirm L gt The preset number and the frequency of the preset station are displayed 4 Repeat
4. 32 256 kbps variable bit rates EN 13 8 Troubleshooting WN Warning e Never remove the casing of this device To keep the warranty valid never try to repair he system yourself f you encounter problems when using th device check the following points before requesting service If the problem remains unsolved go to the Philips Web page www philips com support When you contact Philips make sure that the device is nearby and the model number and serial number are available No power e Make sure that the AC power cord of the device is connected properly e Make sure that there is power at the AC outlet e Asa power saving feature the system switches off automatically 15 minutes after track play reaches the end and no control is operated No sound or poor sound e Adjust the volume e Check that the speakers are connected correctly e Check if the stripped speaker wires are clamped No response from the unit e Disconnect and reconnect the AC power plug then turn on the unit again e Asa power saving feature the system switches off automatically 15 minutes after rack play reaches the end and no control is operated Remote control does not work e Before you press any function button first select the correct source with the remote control instead of the main unit e Reduce the distance between the remote control and the unit e Insert the battery with its polarities
5. O Stop play or erase a program 9 bed DI Skip to the previous next track e Search within a track disc USB e June to a radio station e Adjust time EN Overview of the remote control ar C cD AUDIO IN Ch PRESETTALBUM ise gt DISPLAY PROG TIMER O T T SOUND CLOCK Stee SSS 7 7 a S PHILIPS o e Turn the unit on or off e switch to standby mode or Eco power standby mode cD e Select CD source G FM e Select FM source O PRESET ALBUM A Y e Select a preset radio station e Skip to previous next album GS Ma DDI Skip to the previous next track e Search within a track disc USB e Tune to a radio station e Adjust time VOL 6 EN e Adjust volume MUTE e Mute or restore volume SOUND e Enrich sound effect with Digital Sound Control DSC CLOCK Set the clock e View clock information SLEEP TIMER Set sleep timer Set alarm timer PROG e Program tracks e Program radio stations e Auto store FM radio stations DISPLAY e Adjust display brightness SHUFFLE e Play tracks randomly a e Stop play or erase a program REPEAT e Play a track or all tracks repeatedly Pil e Start pause or resume play USB AUDIO IN e Select USB or AUDIO IN source rN e Press to open or close the disc compartment 3 Get started Caution
6. Always there to help you Register your product and get support at www philips com welcome r Question Contact Philips MCM1150 User manual PHILIPS Contents 1 Important 2 Safety 2 2 Your micro system 4 Introduction 4 What s in the box 4 Overview of the main unit 5 Overview of the remote control 6 3 Get started 7 Connect speakers 7 Connect power 7 Demonstrate the features 7 Prepare the remote control 7 Set clock 8 Turn on 8 4 Play 9 Play from disc 9 Play from USB 9 Control play 9 Skip to a trac 2 Program tracks 9 5 Listen to the radio 10 Tune to a radio station 10 Program radio stations automatically 10 Program radio stations manually 10 Select a preset radio station 10 6 Other features 11 Set the alarm timer 11 Set the sleep timer 11 Listen to an external device 11 7 Product information 12 Specifications 12 USB playability information 12 Supported MP3 disc formats 13 8 Troubleshooting 14 9 Notice EN 15 1 Important Safety CAUTION AUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This bolt of lightning indicates uninsulated material within the device may cause an electrical shock For the safety of everyone in your household please do not remove the covering The
7. Clean only with dry cloth Do not block any ventilation openings nstall in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other devices including amplifiers that produce heat 2 EN exposed to rain or moisture does not operate normally or has been dropped Battery usage CAUTION To prevent battery leakage which may result in bodily injury property damage or damage to the unit e Install all batteries correctly and as marked on the unit Do not mix batteries old and new or carbon and alkaline etc e Batteries packed or installed shall not be exposed to excessive heat such as sunshine fire or the like e Remove batteries when the unit is not used for a long time The device shall not be exposed to dripping or splashing Do not place any sources of danger on the device e g liquid filled objects lighted candles Where the MAINS plug or an appliance coupler is used as the disconnect device the disconnect device shall remain readily operable WN Warning e Never remove the casing of this device e Never lubricate any part of this device e Never place this device on other electrical equipment e Keep this device away from direct sunlight naked flames or heat e Never look into the laser beam inside this device e Ensure that you always have easy access to the power cor
8. an external device through this unit with an MP3 link cable not supplied 1 Press USB AUDIO IN repeatedly to select AUDIO IN source 2 Connect an MP3 link cable not supplied between e AUDIO IN jack 3 5 mm on the unit and the headphone Jack on an external device 3 Start to play the device see the device user manual PHILIPS EN 11 7 Product information Note e Product information is subject to change without prior notice Specifications USB USB Direct Version 2 0 full speed USB 5V Power lt 500 mA Disc Laser Type Semiconductor Disc Diameter 12 cm 8 cm Support Disc CD DA CD R CD RW MP3 CD Audio DAC 24 Bits 44 1 kHz Total Harmonic lt 1 1 kHz Distortion Frequency Response 60 Hz 16 KHZ 3 dB Amplifier S N Ratio gt 70 dBA Maximum Output Power 20 W RMS Frequency Response 60 Hz 16 KHZ 43 dB General information Signal to Noise Ratio 270 dB AC power 100 240 V 50 60 Hz Total Harmonic lt 1 Operation Power 30 W Distortion Consumption Aux Input 600 mV RMS Eco Standby Power lt 0 5 W Consumption Dimensions Speakers Main Unit W x H xD 180 x 121 x 239 mm Speaker Impedance 6 ohm S 7 Speaker Box W x Speaker Driver 3 5 woofer H xD POTO Omm Sensitivity gt 86 dB m W Weight Main Unit 1 5
9. arate collection of electrical and electronic products and batteries The correct disposal of these products helps prevent potentially negative consequences on he environment and human health Your product contains batteries which cannot be disposed of with normal household waste Please inform yourself about the local rules on separate collection of batteries The correct disposal of batteries helps prevent potentially negative consequences on the environment and human health Please visit www recycle philips com for additional information on a recycling center in your area Environmental information All unnecessary packaging has been omitted We have tried to make the packaging easy to separate into three materials cardboard box polystyrene foam buffer and polyethylene bags protective foam sheet Your system consists of materials which can be recycled and reused if disassembled by a specialized company Please observe the local regulations regarding the disposal of packaging materials exhausted batteries and old equipment rr DE The USB IF Logos are trademarks of Universal Serial Bus Implementers Forum inc The making of unauthorized copies of copy protected material including computer programs files broadcasts and sound recordings may be an infringement of copyrights and constitute a criminal offence This equipment should not be used for such purposes This apparatus includes th
10. atteries in fire e Risk of decreased battery life Never mix different brands or types of batteries e Risk of product damage When the remote control is not used for long periods remove the batteries To insert the remote control battery 1 Open the battery compartment 2 Insert the supplied AAA battery with correct polarity as indicated 3 Close the ba ery compartment EN 7 Set clock 1 n standby mode press and hold CLOCK on the remote control for more than two seconds L gt 24H or 12H hour forma displayed 2 Press iaa PPI to select 24H or 12H hour format and then press CLOCK t The hour digits are displayed and begin to blink S 3 Press Ke4 PPI to set hour and then press CLOCK L gt The minute digits are displayed and begin to blink 4 Repeat step 3 to set minute e If no button is pressed in 90 seconds the system exits clock setting mode automatically Eat You can view clock information in power on mode by pressing CLOCK Turn on Press L gt The unit switches to the last selected source Switch to standby mode Press again to switch the unit to standby mode Ly The clock if set is displayed on the panel Switch to ECO standby mode Press and hold for more than two seconds 8 EN L gt The display panel is dimmed Note e The unit switches to Eco Power Standby mode after 15 minutes in standb
11. d plug or adaptor to disconnect this device from the power EN 2 Your micro system Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your product at www philips com welcome Introduction With this unit you can e enjoy audio from discs USB storage devices and other external devices e listen to radio stations You can enrich sound output with below sound effect e Digital Sound Control DSC e DSC 1 Balanced e DSC 2 Clear e DSC 3 Powerful e DSC 4 Warm e DSC 5 Bright The unit supports these media formats COMPACT Hse DIGITAL AUDIO MP3 CD PLAYBACK What s in the box Check and identify the contents of your package e Main unit e 2x speakers e Remote control with one AAA battery User manual Overview of the main unit PHILIPS SOURCE O09 OOOO VOLUME O 0 e Adjust volume e Turn the unit on or off e Switch to standby mode or Eco ml standby mode e Start pause or resume play SOURCE Select a source CD USB FM AUDIO IN Display panel e Show current status nae e Jack for a USB device AUDIO IN e Audio input jack 3 5mm for an external audio device Disc compartment gt Open close the disc compartment GO
12. e Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation Always follow the instructions in this chapter in sequence If you contact Philips you will be asked for the model and serial number of this apparatus The model number and serial number are on the back of the apparatus Write the numbers here Model No Serial No Connect speakers Note e For optimal sound use the supplied speakers only e Connect only speakers with impedance that is the same or higher than the supplied speakers Refer to the Specifications section of this manual Connect power pE Caution e Risk of product damage Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit e Risk of electric shock When you unplug the AC power cord always pull the plug from the socket Never pull the cord e Before you connect the AC power cord ensure that you have completed all other connections Demonstrate the features In the standby mode you can demonstrate features by pressing ll L gt The features are displayed one by one across the display panel e To turn off the demonstration press H again Prepare the remote control Caution Risk of explosion Keep batteries away from heat sunshine or fire Never discard b
13. is label CLASS 1 LASER PRODUCT Note e The type plate is located on the back of the device EN 15 PHILIPS Specifications are subject to change without notice 2014 WOOX Innovations Limited All rights reserved Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N V and are used by WOOX Innovations Limited under license from Koninklijke Philips N V MCM1150_55 UM_V3 0
14. kg Speaker Box 2x 1 2 kg Tuner FM Tuning Range 87 5 108 MHz Tuning grid 50 KHz oe i Sensitivity USB playability information Mono 26dB S N Ratio lt 22 dBu Stereo 46dB S N Ratio lt 45 dBu w ede Sere cise REN 230 dB e ash memory 0 or T 20rdBu e USB flash players USB2 0 or USB1 1 Total Harmonic lt 3 n d dditional card Distortion memory cards requires an additional car reader to work with this unit Signal to Noise Ratio gt 45 dB 12 EN Supported formats e USB or memory file format FAT12 FAT16 FAT32 sector size 512 bytes e MP3 bit rate data rate 32 320 Kbps and variable bit rate e Directory nesting up to a maximum of 8 evels umber of albums folders maximum 99 umber of tracks titles maximum 999 e File name in Unicode UTF8 maximum ength 32 bytes Unsupported formats e Empty albums an empty album is an album hat does not contain MP3 WMA files and will not be shown in the display e Unsupported file formats are skipped For example word documents doc or MP3 files with extension dlf are ignored and not played WMA AAC WAV PCM audio files DRM protected WMA files way m4a m4p mp4 aac e WMA files in Lossless format Supported MP3 disc formats ISO9660 Joliet e Maximum title number 128 depending on file name length Maximum album number 99 e Supported sampling frequencies 32 kHz 44 1 kHz 48 kHz e Supported Bit rates
15. steps 2 3 to program more stations Note To overwrite a programmed station store another station in its place Select a preset radio station In tuner mode press amp W to select a preset number 6 Other features Set the alarm timer This unit can be used as an alarm clock You can select CD FM or USB as alarm source Note e Make sure that you have set the clock correctly 1 n standby mode press and hold SLEEP TIMER for more than two seconds L gt The hour digits are displayed and begin to blink 2 Press 44 P repeatedly to set hour and then press SLEEP TIMER L gt The minute digits are displayed and begin to blink 3 Repeat step 2 to set minute select a source CD FM or USB and adjust volume Note e If no button is pressed in 90 seconds the system exits timer setting mode automatically To activate or deactivate the alarm timer Press SLEEP TIMER repeatedly to activate or deactivate the alarm L If timer is activated 2 is displayed Tip e If CD USB source is selected but no disc is placed or no USB connected the system switches to the tuner source automatically Set the sleep timer To set the sleep timer in turn on mode press SLEEP TIMER repeatedly to select a set period of time in minutes L gt When sleep timer is activated z7 is displayed Otherwise 27 disappears Listen to an external device You can listen to
16. y mode Switch between standby mode and ECO standby mode Press and hold for more than two seconds 4 Play Play from disc Press CD to select CD source Press 4 to open the disc compartment Insert a disc with the printed side facing upward Lh WN Press 4 to close the disc compartment L Play starts automatically If not press Pil Play from USB Note e Make sure that the USB device contains playable audio content _ Press USB AUDIO IN repeatedly to select the USB source 2 Insert a USB device into the socket L Play starts automatically If not press Pil Control play A V Select a folder iea gt gt Select an audio file gt Il Pause or resume play E Stop play REPEAT Play a track or all tracks repeat repeatedly SHUFFLE Play tracks randomly shuffle VOL ncrease or decrease the volume MUTE Mute or restore sound mute SOUND Enrich sound effect with DSC sound balanced clear powerful warm and bright DISPLAY Adjust display brightness display Skip to a track For CD Press kaa gt gt to select another track For MP3 disc and USB 1 Press A W to select an album or a folder 2 Press lt gt gt to select a track or a file Program tracks You can program a maximum of 20 tracks d Press PROG to activate the program mode For MP3 tracks press W to select an album
Download Pdf Manuals
Related Search