RCA PSWTS6R surge protector
Contents
1. Some models have a Surge Stat indicator In these models the indicator shows the current condition of the surge pro tector If the Surge Stat indicator shows either Not Grounded or Exhausted you need to take the appropriate action as described in the first two bullets above2. to protect WALL JACK Coax Cable Connections Some Models If you are using a coax cable and your surge protector has coax jacks pass the OUT CABLE connection through the protected coax jacks on your surge protector Most TV VCR ANTENNA damage can be prevented if you connect the coax cable through the surge protector 1 Connect the Cable Antenna line from your source to the INPUT jack on the surge CONNECT TO protector DEVICESCOAXJACK 2 Connect the coax cable provided from the OUTPUT jack of the surge protector to he device you want to protect TV VCR CABLE DEVICE Indicator Lights Some Models e In models with a protected light the light should be on when the power switch is turned on If this light goes out at any time it means your surge protector has OUT sacrificed itself to protect your equipment and should be replaced e In models with a grounded light the light should be on when the power switch is urned on If the light does not come on when you turn on the surge protector you have a ground wiring problem and you should contact an electrician to properly ground the outlet Connecting your surge protector to an improperly grounded outlet will void all Audiovox warranties e In models with a power switch light the light in the power switch lights when the unit is powered on Your surge protector provides maximum surge protection even if the power switch is in the off position e
3. Connecting Equipment To Your RCA Surge Protector Power Connections All Models Plug the surge protector into a grounded 3 prong outlet only p N Plug all connected equipment directly into the surge protector a CAUTION DO NOT connect to an ungrounded outlet DO NOT use with 2 wire extension cords or adapters This surge protector is designed for indoor use only Install the surge protector away from heat emit ting appliances such as radiators or heat registers DO NOT install where excessive moisture is pres ent DO NOT plug extension cords into the surge protector Never install electrical or telephone wiring during a lightning storm DO NOT USE FOR MEDICAL OR OTHER LIFE SUPPORT EQUIPMENT OR OTHER HIGH RISK ACTIVITIES Phone Fax Modem Connections Some Models If your surge protector has phone jacks pass the phone fax modem connection through the jacks on your surge protector as illustrated on the left Most modem COE O IAC damage can be prevented if you connect the Phone Fax Modem through the surge protector 1 Connect the Phone Fax Moden line from your wall outlet to the INPUT jack on the surge protector T DEVICE receiver computer etc 2 Connect the phone cord provided into the OUTPUT jack on the surge protector 3 Connect the other end of the phone cord to the Phone Fax Modem jack of the device IN TELEPHONE you want
Download Pdf Manuals
Related Search