ASUS SD222-YA
Contents
1. Connect the computer with another available monitor to check if the computer is properly working Adjust the Contrast and Brightness settings via OSD Press the amp button for two seconds to automatically adjust the image e Adjust the H Position or V Position settings via OSD Make sure the signal cable is properly connected to the monitor and the computer Move electrical devices that may cause electrical interference e Inspect the signal cable and make sure that none of the pins are bent e Perform Reset via OSD Adjust the R G B color settings or select the Color Temperature via OSD Press the button for two seconds to automatically adjust the image for VGA mode only Adjust the Phase and Clock settings via OSD Make sure the audio cable is properly connected to the display Adjust the volume settings of both your display and computer Make sure the computer sound card driver is properly installed and activated USB storage device Firmware Updates Operation Function failure Additional information Problem cannot find any of my music move or photo files Certain files cannot be played on the media player How do play entire list of video music and photo How do get the subtitle to play cannot find any of my music movie or photofiles The media player does not recognize my USB storage device The media player remote control is not2. RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies and are used only for identification or explanation and to the owners benefit without intent to infringe Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions e This device may not cause harmful interference and e This device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with manufacturer s instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the
3. interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment to an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications This class B digital apparatus complies with Canadian ICES 003 Safety information Use only the AC DC adapter model EXA0901XA Before setting up the display carefully read all the documentation that came with the package To prevent fire or shock hazard never expose the display to rain or moisture Never try to open the display cabinet The dangerous high voltages inside the display may result in serious physical injury If the power supply is broken do not try to fix it by yourself Contact a qualified service technician or your retailer Before using the product make sure all cables are correctly connected and the power cables are not damaged If you detect any damage contact your dealer immediately Slots and openings on the back or top of the cabinet are provided for ventilation Do not block these slots Never place this product near or ov
4. side down on a clean surface loosen the screw and detach the base from the arm 2 Push down the rear cover to remove it from the groove Fold the arm back to the groove 4 Place the rear cover back to the groove and push it upward e We recommend that you cover the table surface with soft cloth to prevent from iS damaging the display e Hold the stand while removing the screws e The 100 x 100 mm wall mount kit is not included in the product purchased a e Use only the UL listed wall mount bracket with minimum weight load 14kg Screw size M4 x 10 mm ASUS LCD Monitor SD222 Series 2 1 2 2 2 2 Adjusting the display e For optimal viewing we recommend that you look at the full face of the display and then adjust the display to the angle that is the most comfortable to you e Hold the stand to prevent the display from falling while changing its angle e You may adjust the display s angle from 5 to 23 5 23 D mn Chapter 2 Setup 3 1 OSD On Screen Display menu 3 1 1 How to reconfigure ASUS SD222 Picture Brightness 100 gt Input Select Contrast 80 gt X Menu ASCR ON gt Saturation 50 gt Color Temp User Mode gt Gamma 2 2 gt lt gt Move 6 OK D Exit 1 Press the MENU button to activate the OSD menu You may also use the remote controller to activate the OSD by pressing the guide key 2 Press and g
5. subtitle Forward Press to forward the playback 3 3 5 Getting your media player ready 1 Turn on your display 2 Switch input select to Media player Chapter 3 General Instruction 3 4 Using the media player 3 4 1 Main Menu The main menu includes movie music photo all media and set up All media allows you to view all media files in your storage 3 4 2 Configuring the media player setting 1 Press up down key to navigate set up 2 Press left right key to navigate through Video photo and system 3 Press up down key to navigate to the item you want to configure 4 Press left right to change different category 5 Press OK to save 3 4 3 Playing a movie 1 Press up down key and navigate to movie in the home screen 2 Use up down key to select your movie file and press OK 3 4 4 Playing a music 1 Press up down key and navigate to music in the main screen 2 Using up down key to select your music file and press OK 3 4 5 Configuring the audio playback settings The audio playback setting menu allows you to configure repeat Press repeat to select playback options Repeat off Repeat on Repeat All Press OK to confirm selection Create a file named repeatfile media player will detect and auto play the file s 3 4 6 Viewing photos 1 Press up down key to navigate photos in the home screen 2 Press up down key to select the photo 3 Press OK to browse the photos 4 Press play pa
6. working How do update my firmware An operation function failed on my Media player what can do ASUS support site Possible Solution Ensure that your media server ex USB device is properly placed in the slot Ensure the files are supported file formats and are not damaged The media player may not support video or audio format used in the file Please refer specifications summary in chapter 1 When selecting a video music or photo to play press the OK button on the remote control plays just the selected file while pressing PLAY PAUSE key to play the entire list of files Media player detects and displays the movie subtitle Go to Set up gt System gt subtitle decoding e Ensure that your USB storage device is not in standby mode Ensure that the fiels are supported file formats and are not damaged Your USB storage device may not be detected because of problems with the USD hardware Try to re plug the USB storage device to the USB port again or use another USB storage device Ensure that the battery is properly inserted The battery may already be drained out Replace the battery with a new one Ensure that the path between the remote control and the media player is not blocked Download updated firmware on ASUS website and go to Setup gt Firmware gt USB upgrade to perform the firmware upgrade progress e Ifyou are still unable to update firmware reset the system and perform the upd
7. 3 ASUSTeK COMPUTER INC All Rights Reserved No part of this manual including the products and software described in it may be reproduced transmitted transcribed stored in a retrieval system or translated into any language in any form or by any means except documentation kept by the purchaser for backup purposes without the express written permission of ASUSTeK COMPUTER INC ASUS Product warranty or service will not be extended if 1 the product is repaired modified or altered unless such repair modification of alteration is authorized in writing by ASUS or 2 the serial number of the product is defaced or missing ASUS PROVIDES THIS MANUAL AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IN NO EVENT SHALL ASUS ITS DIRECTORS OFFICERS EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES INCLUDING DAMAGES FOR LOSS OF PROFITS LOSS OF BUSINESS LOSS OF USE OR DATA INTERRUPTION OF BUSINESS AND THE LIKE EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS ASUS ASSUMES NO
8. ating process again If the Media player is shut down or powered off during the software installation the update will fail and please attempt again Using a pointed object press the reset button located at the side of the display if you still encounter the same problem please contact the ASUS technical support Download the latest firmwares drivers and utilities from ASUS support site at http support asus com Chapter 3 General Instruction 3 6 Supported Timing List VESA IBM Modes Support timing D SUB inputs Resolution Refresh Rate Horizontal Frequency The modes not listed in the above tables may not be supported For an optimal resolution we recommend that you choose a mode listed in the above table ASUS LCD Monitor SD222 Series 3 11
9. ct to change without notice Chapter 3 General Instruction 3 3 Get start with media player 3 3 1 Specification summary Supported video formats MPEG1 MPEG2 MPEG4 VC 1 H 264 TRP MP4 MOV XVID AVI ASF WMV MKV RM RMVB 720p FLV TS MTS M2TS DAT MPG VOB ISO IFO M1V M2V M4V Supported audio formats MP3 WAV OGG FLAC AIFF TAG ID3 Supported video file extension Supported image formats JPEG BMP PNG GIF TIFF Supported subtitle formats SRT SUB SMI SSA TXT 1 x SD card reader SDXC NTFS amp FAT32 I O ports USB2 0 Host Type A 3 3 2 System requirement 1 Storage device USB flash drive 2 Memory card SDXC NTFS and FAT32 3 3 3 Getting to know the media player item vO vesiin Cd Insert the SD MMC card into this slot support up SDXC oS SD MMC NTFS and FAT32 USB 2 0 USB20port Insert a USB 2 0 device into this port Reset Button Press this button to reset to factory default settings ASUS LCD Monitor SD222 Series 3 5 3 6 3 3 4 Remote controller Use the remote controller to browse through menus and select the media file to play review or listen oo On Turn the media player on or off Press the up down and left right keys to move through the main menu in the home screen and menu bar in a submenu Press the left key to edit the selected file on return rename and delete Press to view the guide menu Subtitle Press to select the supported
10. er a radiator or heat source unless proper ventilation is provided The display should be operated only from the type of power source indicated on the label If you are not sure of the type of power supply to your home consult your dealer or local power company Use the appropriate power plug which complies with your local power standard Do not overload power strips and extension cords Overloading can result in fire or electric shock Avoid dust humidity and temperature extremes Do not place the display in any area where it may become wet Place the display on a stable surface Unplug the unit during a lightning storm or if it will not be used for a long period of time This will protect the display from damage due to power surges Never push objects or spill liquid of any kind into the slots on the display cabinet To ensure satisfactory operation use the display only with UL listed computers which have appropriate configured receptacles marked between 100 240V AC The socket outlet shall be installed near the equipment and shall be easily accessible If you encounter technical problems with the display contact a qualified service technician or your retailer vi Care and cleaning Before you lift or reposition your display it is better to disconnect the cables and power cord Follow the correct lifting techniques when positioning the display When lifting or carrying the display grasp the edges of the display Do not
11. j BE SD222 YA Series Display User Guide Table of contents NOU COS ni an iaaa e aan nain ter aa iv Safety information ns v Care and cleaning vi 1 1 Welcome ccutenpuetdensvudueutaavacui diaaa ia a 1 1 1 2 Package contents 1 1 1 3 Assembling the base of the display 1 2 1 4 Display introduction ss 2 1 2 2 3 1 3 2 3 3 3 4 3 5 3 6 1 4 1 Front of the display 1 4 2 Rear of the display Detaching the arm stand for wall mounting 2 1 Adjusting the display 2 2 OSD On Screen Display menu 3 1 3 1 1 HOW to FOCOMPIQUIC cc scscccscschecsticesigiscnscszeceststecstsoeseertdesad 3 1 3 1 2 OSD Function Introduction 3 1 SPECI Cath ONS sasssa konania enanada aieiaa eiaeaen aaa 3 4 Get start with media player 3 5 3 3 1 Specification summary 3 5 3 3 2 System requirement guit 3 3 3 Getting to know the media player 0 cceeseeeeeeeees 3 5 3 3 4 Remote controller 3 6 3 3 5 Getting your media player ready 3 6 Using the media player 3 7 3 4 1 Main Menu am 3 4 2 Configuring the media player setting cee 3 7 3 4 3 Playing al MOVE ienesa rar 3 7 3 4 4 Playing a music sid 3 4 5 Configuring the audio playback settings cee 346 VIEWING Photos sisirain 3 4 7 Setting background music for the slide show es 3 4 8 Renaming files folders cceceeeeeeeeeseseeeeeeeeeeeees Trouble Shooting FAQ Supported Timing List Copyright 201
12. lift the display by the stand or the cord Cleaning Turn your display off and unplug the power cord Clean the display surface with a lint free non abrasive cloth Stubborn stains may be removed with a cloth dampened with mild cleaner Avoid using a cleaner containing alcohol or acetone Use a cleaner intended for use with the screen Never spray cleaner directly on the screen as it may drip inside the display and cause an electric shock The following symptoms are normal with the display The screen may flicker during the initial use due to the nature of the fluorescent light Turn off the power switch and turn it on again to make sure that the flicker disappears You may find slightly uneven brightness on the screen depending on the desktop pattern you use When the same image is displayed for hours an afterimage of the previous screen may remain after switching the image The screen will recover slowly or you can turn off the power switch for hours When the screen becomes black or flashes or cannot work anymore contact your dealer or service center to fix it Do not try to repair the display by yourself Conventions used in this guide 4 WARNING Information to prevent injury to yourself when trying to complete a task AN CAUTION Information to prevent damage to the components L e when trying to complete a task IMPORTANT Information that you MUST follow to complete a task NOTE Tips and additional informa
13. r gt xX Menu lt gt Move E OK Exit 4 Menu Adjusts the system configuration amp Color OSD Setup F Picture Information gt Input Select Language English gt All Reset gt lt gt Move 2 ok 9 Exit e OSD Setup To adjust the OSD Timeout DDC CI Transparency OSD Rotation and Power indicator of the display e Information To show the information of the display e Language To select OSD language The selections are English French German Spanish Italian Dutch Russian Traditional Chinese Simplified Chinese Japanese Persian Thai Indonesian Poland Turkey Portugal Czech Croatia Hungary Romania and Korean e Key Lock To disable all function keys Long press the MENU button for over five seconds to active or cancel the key lock e All Reset Selecting Yes to revert all settings back to the factory default values ASUS LCD Monitor SD222 Series 3 3 3 4 3 2 Specifications Model Panel Size Max Resolution Brightness Typ Intrisinc Contrast Ratio Typ Viewing Angle CR lt 10 Display Colors Response Time Typ D Sub input Media player input Power ON Consumption Speaker Earphone Power saving mode Power off mode Tilt Mounting Interface Phys Dimension WxHxD Box Dimension WxHxD Net Weight Esti Gross Weight Esti Voltage Rating 21 5 54 61 cm 178 H es es Yi Yi 40 W Yi Yi lt 0 5W Specifications are subje
14. r may configure the value of the an prime color R red G green and B blue ranging from 0 to 100 2 Picture You may adjust the Aspect Control Over Scan Position VGA only and Focus VGA only in this menu item ASUS SD222 amp Color Input Select x Menu Trace Free 60 gt lt gt Move E OK D Exit e Aspect Control To alter the aspect ratio among Full 4 3 Full Height only available for VGA input e OverScan To adjust the over scan ratio for the media player e Position To adjust the horizontal H Position and the vertical position V Position of the image from the VGA input The adjustable range is from 0 to 100 e Focus To reduces the horizontal line and the vertical line noise of the image from the VGA input by adjusting Phase and Clock separately The adjustable range is from 0 to 100 e Trace Free To speed up the response time by Over Drive technology The adjustable range is from 0 to 100 ff e Phase adjusts the phase of the pixel clock signal With a wrong phase L adjustment the screen shows horizontal disturbances e Clock pixel frequency controls the number of pixels scanned by one horizontal sweep If the frequency is not correct the screen shows vertical stripes and the image is not proportional Chapter 3 General Instruction 3 Input Select Select the input source from VGA Media player input signal amp Color VGA G Picture Media playe
15. t button to navigate through the functions Press the OK button to highlight and activate the desired function If the selected function has a sub menu press and button again to navigate through the sub menu Press the OK button to highlight and activate the desired sub menu function Press and button to change the settings of the selected function 4 To exit from the OSD menu press the MENU button Repeat step 2 and step 3 to adjust any other function 3 1 2 OSD Function Introduction 1 Color Select the image color you like from this function ASUS SD222 oy Mode Dynamic gt Picture Brightness 100 gt Input Select Contrast 80 gt X Menu ASCR ON gt Saturation 50 gt Color Temp User Mode gt Gamma 2 2 gt lt gt Move OK Exit e Mode There are standard dynamic soft and monochrome preset modes e Brightness To adjust the luminance ranging from 0 to 100 The lt button is a hotkey to activate this function e Contrast To adjust the contrast ranging from 0 to 100 ASUS LCD Monitor SD222 Series 3 1 3 2 e ASCR to switch between On and Off to enable or disable the Asus Smart Contrast Ratio function e Saturation To adjust the color saturation ranging from 0 to 100 e Color Temp There are three preset white balance modes Cool Normal and Warm and one User mode e Gamma To alter the grayscale gamma between 2 2 and 1 8 ff e Inthe User Mode of the Color Temp the use
16. t is the most comfortable to you 0 e We recommend that you cover the table surface with soft cloth to prevent from Cou damaging the display ASUS LCD Monitor SD222 Series 1 2 1 4 Display introduction 1 4 1 Front of the display cn dU 1 Remote control sensor The display receives the command from the remote controller here 2 Power Indicator e The color of power indicator is as below Status Description Operating Standby Power off 1 3 Chapter 1 Product Introduction 1 4 2 Rear of the display TEES 6 pr VGA S om 2 Lod VGA connector Audio in jack Earphone out jack Power in jack Kensington lock Screw holes of mounting interface NO BeON Control keypad O Power To turn on and off the display a Return To return to the previous selection in the OSD Next To rise the numerical value of the selected function OK To select the highlighted function in the OSD Back To lower the numerical value of the selected function To enter or to exit the OSD menu Menu To turn on and off the key lock function by pressing 5 seconds ASUS LCD Monitor SD222 Series 1 4 2 1 Detaching the arm stand for wall mounting The detachable stand of the display is specially designed for wall mounting 1 Disconnect the power cord and the signal cables Carefully place the display face
17. tion to aid in completing a task Where to find more information Refer to the following sources for additional information and for product and software updates 1 ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products Refer to http www asus com 2 Optional documentation Your product package may include optional documentation that may have been added by your dealer These documents are not part of the standard package vii 1 1 1 1 Welcome Thank you for purchasing the ASUS display The latest display from ASUS provides a crisper broader and brighter screen plus a host of features that enhance your viewing experience With these features you can enjoy the convenience and delightful visual experience that the display brings you 1 2 Package contents Check your package for the following items Display set Display base and screw Quick start guide Warranty card Power cord Sy SC NON Remote controller and battery AN e lfany of the above items is damaged or missing contact your retailer immediately Chapter 1 Product Introduction 1 3 Assembling the base of the display 1 Remove the rear cover by pushing it downward 2 Flip over the arm hidden in the groove 3 Place the rear cover on the top of the groove and push it up with a click sound 4 Attach the base to the arm and fasten the screw tightly Adjust the display to the angle tha
18. use and stop to view pause and end the photos in slideshow ASUS LCD Monitor SD222 Series 3 7 3 8 3 4 7 Setting background music for the slide show 1 Select Music and play music files 2 Press return key and return to main menu and go to photo to start photo slide show 3 4 8 Renaming files folders 1 Select the files or folders you would like to rename from any of these Sources USB and card reader 2 Press edit key and select rename 3 Use the navigation keys to move through the virtual keyboard to rename 4 Press Enter on the virtual keyboard to confirm the new file or folder name Chapter 3 General Instruction 3 5 Trouble shooting FAQ Problem Power LED is not ON The power LED lights amber and there is no screen image Screen image is too light or dark Screen image is not centered or sized properly Screen image bounces or a wave pattern is present in the image Screen image has color defects white does not look white Screen image is blurry or fuzzy No sound or sound is low ASUS LCD Monitor SD222 Series Possible Solution Press the button to check if the monitor is in the ON mode e Check if the power cord is properly connected to the monitor and the power outlet Check if the monitor and the computer are in the ON mode Make sure the signal cable is properly connected the monitor and the computer Inspect the signal cable and make sure none of the pins are bent
Download Pdf Manuals
Related Search