Home

HP ENVY 15-j032nr

1. Component Description 1 TouchPad zone Moves the on screen pointer and selects or activates items on the screen NOTE The TouchPad also supports edge swipe gestures For more information see Edge swipes on page 31 2 Left TouchPad button Functions like the left button on an external mouse 3 Right TouchPad button Functions like the right button on an external mouse Chapter 2 Getting to know your computer Lights EE mest 1 ER ad Hd mi Heer Ed E ES PE Doh eek ETER RIGE Component Description 1 l Power light e White The computer is on e Blinking white The computer is in the Sleep state which is an energy saving mode The computer shuts off power to the display and other unneeded components e Off The computer is off or in Hibernation Hibernation is an energy saving mode that uses the least amount of power NOTE For select models the Intel Rapid Start Technology feature is enabled at the factory Rapid Start Technology allows your computer to resume quickly from inactivity For more information see Initiating Sleep and Hibernation on page 41 2 d 9 Mute light e Amber Computer sound is off e Off Computer sound is on 3 i i Wireless light On An integrated wireless device such as a wireless local I area network WLAN device and or a Bluetooth device is on NOTE Onsome models the wireless light is amber when all wireless devices are off 4 Caps lock light On
2. If a drive must be mailed place the drive in a bubble pack mailer or other suitable protective packaging and label the package FRAGILE Avoid exposing a drive to magnetic fields Security devices with magnetic fields include airport walk through devices and security wands Airport conveyer belts and similar security devices that check carry on baggage use X rays instead of magnetism and do not damage drives Remove media from a drive before removing the drive from the drive bay or traveling with shipping or storing a drive Do not type on the keyboard or move the computer while an optical drive is writing to a disc The write process is sensitive to vibration Before you move a computer that is connected to an external hard drive initiate Sleep and allow the screen to clear or properly disconnect the external hard drive Replacing a hard drive A CAUTION Drives are fragile computer components that must be handled with care Do not drop a drive place items on it or expose it to liquids or temperature or humidity extremes See Handling drives on page 52 for specific precautions when handling drives 52 Chapter 8 Maintaining your computer CAUTION To prevent information loss or an unresponsive system Before removing or installing a drive shut down the computer If you are unsure whether the computer is off in the Sleep state or in Hibernation turn the computer on and then shut it down through the operating syste
3. 46 Chapter6 Managing power To test the AC adapter 1 Shut down the computer 2 Remove the battery from the computer 3 Connect the AC adapter to the computer and then plug it into an AC outlet 4 Turn on the computer e Ifthe power lights turn on the AC adapter is working properly e Ifthe power lights remain off check the connection from the AC adapter to the computer and the connection from the AC adapter to the AC outlet to make sure the connections are secure e Ifthe connections are secure and the power lights remain off the AC adapter is not functioning and should be replaced Contact support for information on obtaining a replacement AC power adapter HP CoolSense select models only HP CoolSense SK automatically detects when the computer is not in a stationary position and adjusts performance and fan settings to keep the surface temperature of your computer at the optimum level of comfort When HP CoolSense is off the position of the computer is not detected and the performance and fan options remain at the factory setting As a result the surface temperature of the computer may be higher than it would be with HP CoolSense on To turn CoolSense off or on follow these steps A From the Start screen type cool select Settings and then select HP CoolSense Refreshing your software content with Intel Smart Connect Technology select models only When the computer is in the Sleep state Intel Smart Conn
4. 2 On the Playback tab select the name of the digital output device 3 Select Set Default and then select OK To return the audio stream to the computer speakers 1 From the Windows desktop right click or tap the Speakers icon in the notification area at the far right of the taskbar and then select Playback devices 2 On the Playback tab select Speakers and Headphones 3 Select Set Default and then select OK Using Intel Wireless Display select models only Intel Wireless Display allows you to transmit your computer content wirelessly to your receive display device such as HDTV monitor projector game console Blu ray player or DVR by using an optional wireless adapter purchased separately For details about using the wireless adapter see the manufacturer s instructions A To open Intel Wireless Display from the Start screen type w and then select Intel WiDi Ey NOTE Before using the wireless display feature be sure that your wireless device is turned on Managing your audio and video files CyberLink PowerDVD helps you manage and edit your photo and video collections A To open CyberLink PowerDVD from the Start screen type c and then select CyberLink PowerDVD For more information about using CyberLink PowerDVD see the PowerDVD software Help 26 Chapter 4 Enjoying entertainment features 5 Navigating using touch gestures pointing devices and the keyboard Your computer allows navigation
5. the non Windows Setup Utility BIOS and other third party software can help protect your computer from a variety of risks such as viruses worms and other types of malicious code IMPORTANT Some security features listed in this chapter may not be available on your computer Computer risk Security feature Unauthorized use of the computer Power on password Computer viruses Antivirus software Unauthorized access to data Firewall software Unauthorized access to Setup Utility BIOS settings and Administrator password other system identification information Ongoing or future threats to the computer Software updates Unauthorized access to a Windows user account User password Unauthorized removal of the computer Security cable lock Using passwords A password is a group of characters that you choose to secure your computer information and to protect online transactions Several types of passwords can be set For example when you set up your computer for the first time you were asked to create a user password to secure your computer Additional passwords can be set in Windows or in the HP Setup Utility BIOS that is preinstalled on your computer You may find it helpful to use the same password for a Setup Utility BIOS feature and for a Windows security feature Use the following tips for creating and saving passwords e To reduce the risk of being locked out of the computer record each password and st
6. To check the audio functions on your computer follow these steps Using audio 23 Mode Steps 1 Swipe from the right edge of the TouchPad or touch screen select models only to display the charms tap Search and then tap the search box 2 Type c tap Control Panel tap Hardware and Sound and then tap Sound 3 When the Sound window opens tap the Sounds tab Under Program Events tap any sound event such as a beep or alarm and then tap Test Ee 1 From the Start screen type c and then select Control Panel from the list of applications an 2 Select Hardware and Sound and then select Sound 3 When the Sound window opens select the Sounds tab Under Program Events select any sound event such as a beep or alarm and then click Test You should hear sound through the speakers or through connected headphones To check the recording functions on your computer follow these steps Mode Steps 1 Swipe from the right edge of the TouchPad or touch screen select models only to display the charms tap Search and then tap the search box 2 Type s and then select Sound Recorder 3 Click Start Recording and speak into the microphone Save the file to your desktop 4 Open a multimedia program and play the recording pays 1 From the Start screen type s and then select Sound Recorder 2 Click Start Recording and speak into the microphone Save the file to your desktop 3 Open a multimedia program and p
7. To protect a memory module after removal place it in an electrostatic safe container 8 Insert a new memory module CAUTION To prevent damage to the memory module hold the memory module by the edges only Do not touch the components on the memory module a Align the notched edge 1 of the memory module with the tab in the memory module slot b With the memory module at a 45 degree angle from the surface of the memory module compartment press the module into the memory module slot 2 until it is seated c Gently press the memory module 3 down applying pressure to both the left and right edges of the module until the retention clips snap into place CAUTION To prevent damage to the memory module be sure that you do not bend the module Improving performance 57 9 Replace the service door 10 Replace the battery 11 Turn the computer right side up and then reconnect external power and external devices 12 Turn on the computer Updating programs and drivers HP recommends that you update your programs and drivers on a regular basis to the latest versions Updates can resolve issues and bring new features and options to your computer Technology is always changing and updating programs and drivers allows your computer to run the latest technology available For example older graphics components might not work well with the most recent gaming software Without the latest driver you would not
8. computer from operating properly Icon Key f1 Description Opens Help and Support which provides tutorials information about the Windows operating system and your computer answers to questions and updates to your computer Help and Support also provides automated troubleshooting tools and access to support IOII 2 f3 f4 Decreases the screen brightness incrementally as long as you hold down the key Increases the screen brightness incrementally as long as you hold down the key Switches the screen image between display devices connected to the system For example if a monitor is connected to the computer pressing this key alternates the screen image from the computer display to the monitor display to a simultaneous display on both the computer and the monitor Most external monitors receive video information from the computer using the external VGA video standard This action key can also alternate images among other devices that are receiving video information from the computer f5 On select models turns the radiance backlight keyboard feature off or on NOTE To conserve battery power turn off this feature de f6 Mutes or restores speaker sound Decreases speaker volume incrementally as long as you hold down the key q f8 Increases speaker volume incrementally as long as you hold down the key 38 Chapter 5 Navigating using touch gestures pointing device
9. flash drive connected to the USB port on your computer also allows quick data transfer Some devices use the computer s power to run others have their own power source Some devices come with software that must be installed Ey NOTE For information about connecting external wireless devices see Connecting to a network on page 15 NOTE For more information about required software and drivers or to learn which computer port to use see the manufacturer s instructions Using a USB device Most computers have more than one USB port because this versatile interface allows you to connect numerous kinds of external devices such as a USB keyboard mouse external drive printer scanner or USB hub to your computer Your computer has more than one type of USB port See Getting to know your computer on page 3 for the types of USB ports you have on this computer Be sure to purchase devices that are compatible with your computer Type Description USB 3 0 Transfers data at 640 MB s USB 3 0 ports also known as SuperSpeed ports are also compatible with USB 1 0 and 2 0 devices USB 3 0 charging port Connects an optional USB device The USB 3 0 charging port can also charge select models of cell phones and MP3 players even when the computer is off NOTE AUSB charging port also referred to as a USB powered port allows you to charge connected USB devices Standard USB ports will not charge all USB devices or will charge u
10. models only Ee ER AR AA Re ee ee ee ee ee ee ee AR AA Re AA ee ee ee ee ee ee ee ee 73 Using HP Recovery media to recover esse see ede ee ee ee ee ee ee ee ee ee ee ee 74 Changing the computer boot order ee ee ee ee 74 Removing the HP Recovery partition ie se se ee AE ee ee ee AR ee Gee ee ee ee ee ee ee ee 74 12 SPOCMIGAUGNS AE N N N N EE Ie 75 Ted ee ER ER EE nada 75 Operating environment EE ERG E Ee ee ee oe ee RE Ge ee Oe AE EG Ed Ee Re Ee eg 75 14 Electrostaiic DiSERANOE ER RE N EE ER GE ee eee Ge Ge ee eee 77 IGOR EE N 78 1 Starting right This computer is a powerful tool designed to enhance your work and entertainment Read this chapter to learn about best practices after setup fun things to do with your computer and where to get more HP resources Best practices To get the most out of your smart investment after you set up and register the computer we recommend the following steps If you haven t already done so connect to a wired or wireless network See details in Connecting to a network on page 15 Take a minute to browse the printed Windows 8 Basics guide to explore the new Windows 8 features 29 TIP To quickly return to the computer Start screen from an open app or the Windows desktop press the Windows key an on your keyboard Pressing the Windows key again will return you to the previous screen Become familiar with the computer hardware and software For more informa
11. 2 Select Synaptics ClickPad 3 Select a gesture to activate the demonstration To turn a gesture off or on 1 From the Synaptics ClickPad screen select or clear the check box next to the gesture that you want to turn on or off 2 Select Apply and then select OK Using the TouchPad 27 Tapping To make an on screen selection use the tap function on the TouchPad e Pointto an item on the screen and then tap one finger on the TouchPad zone to make a selection Double tap an item to open it EY NOTE Tap and hold your finger on the TouchPad to open a help screen that provides information about the selected item 28 Chapter 5 Navigating using touch gestures pointing devices and the keyboard Scrolling Scrolling is useful for moving up down or sideways on a page or image e Place two fingers slightly apart on the TouchPad zone and then drag them up down left or right Pinching zooming Pinching and zooming allow you to zoom in or out on images or text e Zoom in by placing two fingers together on the TouchPad zone and then moving your fingers apart e Zoom out by placing two fingers apart on the TouchPad zone and then moving your fingers together Using TouchPad gestures 29 Rotating select models only Rotating allows you to turn items such as photos e Pointto an object then anchor the forefinger of your left hand in the TouchPad zone Using your right hand slide your forefinger in a sweeping mot
12. Caps lock is on which switches the keys to all capital letters 5 Fingerprint reader light e White The fingerprint authentication was successful e Amber The fingerprint authentication failed Top Buttons and speakers 5j daai Bl i Bl a it pie Bl mH pas xi ea me a ie TE si Component Description 1 l Power button e When the computer is off press the button to turn on the tablet e When the computer is on press the button briefly to initiate Sleep e When the computer is in the Sleep state press the button briefly to exit Sleep CAUTION Pressing and holding down the power button will result in the loss of unsaved information e If the computer has stopped responding and Microsoft Windows shutdown procedures are ineffective press and hold the power button down for at least 5 seconds to turn off the tablet RN Swipe from the right edge of the TouchPad or touch screen select models only to display the charms tap Search and then tap the search box In the search box type power select Settings and then select Power options or see Managing power on page 41 OF EED To learn more about your power settings from the Start screen type p In the search box type power select Settings and then select Power options or see Managing power on page 41 10 Chapter 2 Getting to know your computer Component Description 2 Speakers 2 Produce
13. EE Ee 8 TouchPad sacs ccd RE AE EA A A 8 Be RR RE AR AE A N 9 Butons and speakers si EN RE Ee GE GE ee ee Ee Re Ge Be ee ee 10 OR AR HR N ER EE AE AE NE 12 POROM enis KO N ME N N 13 EER RR EE OE EE OR OE OR A OO a 14 3 Connecing Oane CONG AE Ee AO AR OE EE EE REO 15 Connecting to a wireless network 000 0 cece ee ke ee ek Re ee ee RR ee ee Re ee ee Ge Re ee ee Re ee ee ee RA ee ee ee kk ee eke ee 15 Using the wireless controls ee ee AR ee ee ee AA ee ee ee AA ee ee ee ee ee 15 Using the wireless buttON eee ee AR ee AA AR ee NAAN ee ee ee ee 15 Using operating system controls iese ee RR ee ee ee Re ee ee ee Re ee ee 15 Using LUG OR EE EE RE OR AR OE EE N 16 Using an Internet service provider iii ee dd ee ee AA ee ee ee ee ee ee ee ee 16 setting up AU EE EE EE EE EE EG 16 Configuring a wireless router ie ee ee ee AA ee Re ee ee ee ee ee ee ee ee 17 Protecting your WLAN RR OE ER T 17 Connecting tora WLAN ii see ESE ERGE EER GEREG a ESE ee ee GEREG GE eek KERE Ee ee ee Se NEE 17 Using Bluetooth wireless devices select models only ii ee ee ee 18 Connecting to a wired netWOFK iese ee ee ee AA ee AA ARTEA ee ee ee ee ee ee ee ee ee ek ke ee ee 18 Connecting to a local area network LAN ee RR ee ee RR ee ee ke ee ee ee 18 4 Enjoying entertainment features eN ESE NERENS EE EER Ee RR ene Ne EE sw Ne EE De eke ee Reg on ER in Eng ee eN Ee 20 Using the webcam select models o
14. Ey NOTE You may be prompted for your permission or password when using Refresh See Help and Support for more information From the Start screen type h and then select Help and Support To start Refresh 1 From the Start screen point to the upper right or lower right corner of the screen to reveal the charms 2 Click Settings 3 Click Change PC settings in the bottom right corner of the screen and then select General from the PC settings screen 4 Under Refresh your PC without affecting your files select Get started and then follow the on screen instructions Remove everything and reinstall Windows Sometimes you want to perform detailed reformatting of your computer or you want to remove personal information before you give away or recycle your computer The process described in this section provides a speedy simple way to return the computer to its original state This option removes all personal data apps and settings from your computer and reinstalls Windows iy IMPORTANT This option does not provide backups of your information Before using this option back up any personal information you wish to retain You can initiate this option by using the f11 key or from the Start screen To use the f11 key 1 Press f11 while the computer boots Or Press and hold f11 as you press the power button 2 Select Troubleshoot from the boot options menu 3 Select Reset your PC and then follow the on screen instructi
15. Type c and then select CyberLink YouCam from the list of applications OF EE From the Start screen type c and then select CyberLink YouCam from the list of applications 4 5 6 USB 3 0 ports 3 Audio out headphone jack Audio in microphone jack Speakers 4 Connect optional USB 3 0 devices and provide enhanced USB power performance NOTE For details about different types of USB ports see Using a USB device on page 49 Connects optional powered stereo speakers headphones earbuds a headset or a television audio cable Also connects an optional headset microphone This jack does not support optional microphone only devices WARNING To reduce the risk of personal injury adjust the volume before putting on headphones earbuds or a headset For additional safety information refer to the Regulatory Safety and Environmental Notices To access this guide from the Start screen type support select the HP Support Assistant app select My computer and then select User guides NOTE When a device is connected to the jack the computer speakers are disabled NOTE Be sure that the device cable has a 4 conductor connector that supports both audio out headphone and audio in microphone Produce sound 7 HP Triple Bass Reflex Subwoofer Provides superior bass sound 8 USB 3 0 charging port Connects an optional USB device The USB 3 0 charging port can also
16. all open programs 2 Swipe from the right edge of the TouchPad or touch screen select models only to display the charms tap Settings tap the Power icon and then tap Shut down From the Start screen point to the upper right or lower right corner of the screen When the charms list opens click Settings click the Power icon and then click Shut down 3 If the computer is unresponsive and you are unable to use the preceding shutdown procedures try the following emergency procedures in the sequence provided e Press ctritalttdelete click the Power icon and then select Shut Down e Press and hold the power button for at least 5 seconds e Disconnect the computer from external power e On models with a user replaceable battery remove the battery 48 Chapter6 Managing power 7 Managing and sharing information Drives are digital storage devices that help you store manage share and access information Your computer has an internal hard drive or a solid state drive that stores your computer s software operating system and also provides storage for all of your personal files Some computers have a built in optical drive that allows you to read or write to a CD DVD or on select models Blu ray Disc BD For added capacity or functionality connect an external drive purchased separately such as an optical drive or hard drive or insert a digital storage card directly from your phone or camera A Universal Serial Bus USB
17. be getting the most out of your equipment Go to http www hp com support to download the latest versions of HP programs and drivers In addition register to receive automatic update notifications when they become available Cleaning your computer Cleaning your computer and external devices helps keep them in good working condition If you don t clean your computer dust and dirt particles can build up A CAUTION Avoid using the following cleaning products to clean your computer Strong solvents such as alcohol acetone ammonium chloride methylene chloride and hydrocarbons which can permanently damage the surface of the computer 58 Chapter 8 Maintaining your computer Cleaning the display sides and cover Gently wipe the display using a soft lint free cloth moistened with an alcohol free glass cleaner Allow the display to dry before closing the computer cover Use a pre moistened germicidal wipe to clean the sides and cover Fibrous materials such as paper towels can scratch the computer EY NOTE When cleaning the cover of the computer use a circular motion to aid in removing dirt and debris Cleaning the TouchPad and keyboard Z CAUTION Never allow liquids to drip between the keys on the keyboard even when you are cleaning the computer This can permanently damage internal components To clean and disinfect the TouchPad and keyboard use a soft microfiber cloth or a static free cloth witho
18. briefly press the second key of the combination Using the keyboard and mouse 39 Function Hot key Description Reveals system information fn esc Reveals information about system hardware components and the system BIOS version number Control the bass settings fn b Enables or disables the Beats Audio bass settings Beats Audio is an enhanced audio feature that provides a deep controlled bass while maintaining a clear sound Beats Audio is enabled by default You can also view and control the bass settings through the Windows operating system To view and control the bass properties from the Start screen type c select Control Panel select Hardware and Sound and then select Beats Audio Control Panel Using the integrated numeric keypad The computer includes an integrated numeric keypad and it also supports an optional external numeric keypad or an optional external keyboard that includes a numeric keypad Component Description num lock key Controls the function of the integrated numeric keypad Press the key to alternate between the standard numeric function found on an external keypad this function is turned on at the factory and the navigational function indicated by the directional arrows on the keys NOTE The keypad function that is active when the computer is turned off is reinstated when the computer is turned back on Integrated numeric keypad Set at the factory to function like an external numeric
19. e Gently swipe your finger inward from the left edge of the display bezel to switch between apps Without lifting your finger swipe back toward the left edge to reveal all open apps Top edge swipe and bottom edge swipe 36 The top edge swipe or bottom edge swipe allows you to open a list of apps available on your computer 1 Gently swipe your finger from the top edge or the bottom edge of the display bezel onto the screen Chapter 5 Navigating using touch gestures pointing devices and the keyboard 2 Tap All apps to view available apps Setting touch screen preferences select models only Mode Steps 1 Swipe from the right edge of the TouchPad or touch screen select models only to display the charms tap Search and then tap the search box 2 Type c tap Control Panel tap Hardware and Sound tap Pen and Touch and then follow the on screen instructions gary To change or create flick assignments B 1 On the Start screen type c and then tap Control Panel 2 Tap Hardware and Sound tap Pen and Touch and then tap the Flicks tab 3 Tap Navigational flicks and editing flicks and then tap Customize 4 Follow the on screen instructions to change or create a flick assignment 5 Tap OK These preferences are specific to the touch screen and the computer Using the keyboard and mouse The keyboard and mouse allow you to type select items scroll and to perform the same functions as you do using touch gestur
20. on and your work returns to the screen where you stopped working EY NOTE If you have set a password to be reguired on wakeup you must enter your Windows password before your work will return to the screen 42 Chapter6 Managing power Setting password protection on wakeup To set the computer to prompt for a password when the computer exits Sleep or Hibernation follow these steps 1 2 3 4 5 From the Start screen type power select Settings and then select Power Options In the left pane click Require a password on wakeup Click Change Settings that are currently unavailable Click Require a password recommended Ey NOTE If you need to create a user account password or change your current user account password click Create or change your user account password and then follow the on screen instructions If you do not need to create or change a user account password go to step 5 Click Save changes Using the power meter and power settings The power meter is located on the Windows desktop The power meter allows you to quickly access power settings and view the remaining battery charge To reveal the percentage of remaining battery charge and the current power plan on the Windows desktop point over the power meter icon To use Power Options or to change the power plan click the power meter icon and select an item from the list From the Start screen you can also type power select Setti
21. page 42 Z CAUTION To reduce the risk of possible audio and video degradation loss of audio or video playback functionality or loss of information do not initiate Sleep while reading from or writing to a disc or an external media card EYNOTE You cannot initiate any type of networking connection or perform any computer functions while the computer is in the Sleep state or in Hibernation Intel Rapid Start Technology select models only For select models the Intel Rapid Start Technology RST feature is enabled by default Rapid Start Technology allows your computer to resume quickly from inactivity Rapid Start Technology manages your power saving options as follows Sleep Rapid Start Technology allows you to select the Sleep state To exit from Sleep press any key activate the TouchPad or press the power button briefly Hibernation Rapid Start Technology initiates Hibernation after a period of inactivity while in the Sleep state when running on battery power or on external power or when the battery reaches a critical level After Hibernation is initiated press the power button to resume your work EY NOTE Rapid Start Technology can be disabled in Setup Utility BIOS If you want to be able to initiate the Hibernation state you must enable user initiated Hibernation using Power Options See Enabling and exiting user initiated hibernation on page 42 Initiating Sleep and Hibernation 41 Initiating a
22. see the computer screen image on a high definition TV or monitor connect the high definition device according to the following instructions 1 Connect one end of the HDMI cable to the HDMI port on the computer HEMA P al 2 Connect the other end of the cable to the high definition TV or monitor 3 Press f4 to alternate the computer screen image between 4 display states e PC screen only View the screen image on the computer only e Duplicate View the screen image simultaneously on both the computer and external device e Extend View the screen image extended across both the computer and external device e Second screen only View the screen image on the external device only Each time you press f4 the display state changes EY NOTE Adjust the screen resolution of the external device especially if you choose the Extend option From the Start screen type c and then select Control Panel from the list of applications Select Appearance and Personalization Under Display select Adjust screen resolution for best results Using video 25 Configuring HDMI audio settings HDMI is the only video interface that supports high definition video and audio After you connect an HDMI TV to the computer you can then turn on HDMI audio by following these steps 1 From the Windows desktop right click or tap the Speakers icon in the notification area at the far right of the taskbar and then select Playback devices
23. sound 3 Fingerprint reader select models only Allows a fingerprint logon to Windows instead of a password logon Top 11 Keys Component Description 1 esc key Reveals system information when pressed in combination with the fn key 2 fn key Executes freguently used system functions when pressed in combination with the b key the spacebar or the esc key 3 ui Windows key Returns you to the Start screen from an open app or the ma Windows desktop NOTE Pressing the Windows key again will return you to the previous screen 4 Action keys Execute frequently used system functions NOTE On select models the f5 action key turns the radiance backlight keyboard feature off or on 5 num Ik key Alternates between the navigational and numeric functions on the integrated numeric keypad 6 Integrated numeric keypad When num Ik has been enabled it can be used like an external numeric keypad 12 Chapter 2 Getting to know your computer Bottom oeoo Component 1 2 3 4 E Service door Battery bay Vents 3 Battery cover release latch Description Provides access to the hard drive bay the wireless LAN WLAN module slot and the memory module slots CAUTION To prevent an unresponsive system replace the wireless module only with a wireless module authorized for use in the computer by the governmental agency that regulates wireless devices in your countr
24. the System area select Device Manager A list reveals all the devices installed in your computer Locating software A To find out what software is installed on your computer from the Start screen right click using the mouse or swipe from the top of the TouchPad to reveal the apps and then select the All apps icon Finding your hardware and software information 3 4 Right side Component 1 2 Q ry ooe Audio out headphone jack Audio in microphone jack USB 3 0 ports 2 Description Connects optional powered stereo speakers headphones earbuds a headset or a television audio cable Also connects an optional headset microphone This jack does not support optional microphone only devices WARNING To reduce the risk of personal injury adjust the volume before putting on headphones earbuds or a headset For additional safety information refer to the Regulatory Safety and Environmental Notices To access this guide from the Start screen type support select the HP Support Assistant app select My computer and then select User guides NOTE When a device is connected to the jack the computer speakers are disabled NOTE Be sure that the device cable has a 4 conductor connector that supports both audio out headphone and audio in microphone Connect optional USB 3 0 devices and provide enhanced USB power performance NOTE For details about different types of USB ports see Us
25. to reinstall the original operating system in cases where the hard drive is corrupted or has been replaced HP Recovery media you create will provide the following recovery options e System Recovery Reinstalls the original operating system and the programs that were installed at the factory e Minimized Image Recovery Reinstalls the operating system and all hardware related drivers and software but not other software applications e Factory Reset Restores the computer to its original factory state by deleting all information from the hard drive and re creating the partitions Then it reinstalls the operating system and the software that was installed at the factory See Creating HP Recovery media on page 70 2 As you add hardware and software programs create system restore points A system restore point is a snapshot of certain hard drive contents saved by Windows System Restore at a specific time A system restore point contains information that Windows uses such as registry settings Windows creates a system restore point for you automatically during a Windows update and during other system maintenance such as a software update security scanning or system diagnostics You can also manually create a system restore point at any time For more information and steps for creating specific system restore points see Help and Support From the Start screen type h and then select Help and Support 3 As you add photos video mu
26. using touch gestures select models only in addition to the keyboard and mouse Touch gestures can be used on your computer TouchPad or on a touch screen select models only EYNOTE An external USB mouse purchased separately can be connected to one of the USB ports on the computer Review the Windows 8 Basics guide included with your computer The guide provides information on common tasks using the TouchPad touch screen or the keyboard Select computer models have special action keys or hot key functions on the keyboard to perform routine tasks Some computer models may also have an integrated numeric keypad Using the TouchPad The TouchPad allows you to navigate the computer with simple finger movements You can customize the touch gestures by changing settings button configurations click speed and pointer options From the Start screen type c to reveal the Apps list Select Control Panel and then select Hardware and Sound Under Devices and Printers select Mouse Using TouchPad gestures A TouchPad allows you to control the pointer on the screen using your fingers 29 TIP Use the left and right buttons on the TouchPad as you would use the corresponding buttons on a external mouse Ey NOTE TouchPad gestures are not supported in all apps To view a demonstration of each gesture 1 From the Start screen type c to reveal the Apps list Select Control Panel and then select Hardware and Sound
27. 7 corporate WLAN connection 17 equipment needed 16 functional range 18 public WLAN connection 17 security 17 using 16 wireless network securing 64 WLAN antennas identifying 7 WLAN device 14 16 WLAN label 14 Z zooming touch screen gesture 34 zooming TouchPad gesture 29
28. 73 correcting boot problems 74 starting 73 HP Recovery media creating 70 recovery 74 HP Recovery partition 73 recovery 73 removing 74 hubs 49 l input power 75 installing optional security cable lock 65 integrated numeric keypad identifying 40 integrated numeric keypad identifying 12 integrated webcam identifying 7 21 Intel Wireless Display 26 internal display switch identifying 6 internal microphones identifying 7 20 Internet connection setup 16 Internet security software using 63 J jacks audio out headphone 4 21 network 4 RJ 45 network 4 K keyboard backlight action key identifying 38 keyboard hot keys identifying 39 keypad integrated numeric 12 keys action 12 esc 12 fn 12 Windows logo 12 L labels Bluetooth 14 regulatory 14 serial number 14 service 14 wireless certification 14 WLAN 14 latch battery cover release 13 left edge swipe 36 lights AC adapter 4 caps lock 9 hard drive 6 mute 9 power 6 9 wireless 9 low battery level 44 M maintenance Disk Cleanup 55 Disk Defragmenter 55 memory card reader identifying 5 memory module identifying 13 inserting 57 removing 56 replacing 56 memory module service door removing 56 microphone connecting 22 minimized image creating 73 recovery 73 mouse external setting preferences 27 mute light identifying 9 N network jack identifying 4 num lock key identifying 40 O operating environment 75 op
29. Diagnostics allows you to run diagnostic tests to determine if the computer hardware is functioning properly Using System Diagnostics 67 To start System Diagnostics 1 Turn on or restart the computer quickly press esc and then press f2 2 Click the diagnostic test you want to run and then follow the on screen instructions Ey NOTE If you need to stop a diagnostic test while it is running press esc 68 Chapter 10 Using Setup Utility BIOS and System Diagnostics 11 Backing up restoring and recovering Your computer includes tools provided by HP and the operating system to help you safeguard your information and retrieve it if you ever need to These tools will help you return your computer to a proper working state or even back to the original factory state all with simple steps This chapter provides information about the following processes e Creating recovery media and backups e Restoring and recovering your system Ey NOTE This guide describes an overview of backing up restoring and recovering options For more details about the tools provided see Help and Support From the Start screen type h and then select Help and Support Creating recovery media and backups Recovery after a system failure is only as good as your most recent backup 1 After you successfully set up the computer create HP Recovery media This step creates a backup of the HP Recovery partition on the computer The backup can be used
30. ER ge nase DR es Eg RA Ed ee es Ee ge ee ER ge ie 29 Rotating select models only ee Re Ge AR Re ee AA ee Re ee ee ee Re ee ee ee Re ee ee 30 2 finger click Select models only ee ee ee RR ee ee Re ee ee ee ee ee 30 Flicking select models Only ESE GR EER GE de Se Ee RE Ge ae ge Ee ee ee ve De gee 31 Elle Si N EE N N 31 Rightedge SWID si ER N Ee Ee ee SE ER Ge EE Re ee SE ER se ee ee 31 Top edde SWIPE ii RE RS Re Ne GER Rg ee RR DA AR ee WE Se Re ED ee ee 32 Leftedge SWIDE AE ety dntacdoeduaeiticceeanandicecceaties 32 Using touch screen gestures select models only ee ee AR ee AA ee ee AR ee ee ee ee 33 One finger e EE OG 33 dele ie RE ER RE EE N neatadcmniatee Fe 33 oErolling EE EE EE EE va ER ek ee RE ee EE DE ee Se ee es ee sea 34 PINGHING StretCMING EE EEN a ASe ER GE ee ER EN Ge AR EE RR SE ee kg 34 Rotating select models only ee RR ee Re ee ee ee de ee ee ee ee ee ee ee ee 35 Edge SWIDES EE OG Ge ee OO ae ve ee ae NO tne AO ee ee oe ge ee GE 35 Rigntedge SWIPE EE ESE SERE Se ee piled Ee ee EG oe ER GE Ee Pe ge ee ee 35 Left edge SW pe EE N MR EE OE EE aa naana 36 Top edge swipe and bottom edge SWipe se RR AAR AAR AR Re AA AA ee ee ee ee ee ee 36 Setting touch screen preferences select models only ie ee AA ee RA ee ee ee ee ee 37 Using the keyboard and MOUSE ees ee ee ee AA Re AA ee Re ee AA ee Re ee ee Re ee ee ee ee ee ee ee Re ee ee ee ee ee 37 Vi Bale ANG GR ER alguaasaneenadetha
31. Hibernation on page 41 Display Component Description 1 Internal display switch Turns off the display and initiates Sleep if the display is closed while the power is on NOTE The internal display switch is not visible from the outside of the computer 6 Chapter 2 Getting to know your computer Component Description 2 Internal microphones 2 Record sound 3 Webcam light On The webcam is in use 4 HP TrueVision HD Webcam Records video and takes still photographs Q PN Swipe from the right edge of the TouchPad or touch screen select models only to display the charms tap Search and then tap the search box Type c and then select CyberLink YouCam from the list of applications 0 r From the Start screen type c and then select CyberLink YouCam from the list of applications 5 WLAN antennas 2 Send and receive wireless signals to communicate with wireless local area networks WLANs The antennas are not visible from the outside of the computer For optimal transmission keep the areas immediately around the antennas free from obstructions For wireless regulatory notices see the section of the Regulatory Safety and Environmental Notices that applies to your country or region To access this guide from the Start screen type support select the HP Support Assistant app select My computer and then select User guides Display 7 8 Top TouchPad 0 om jo
32. Software companies provide software updates to their products to correct security problems and improve functionality of the software Securing your wireless network When you set up your wireless network always enable security features For more information see Protecting your WLAN 64 Chapter9 Securing your computer and information Backing up your software applications and information Regularly back up your software applications and information to protect them from being permanently lost or damaged through a virus attack or a software or hardware failure For more information see Backing up restoring and recovering Using an optional security cable lock A security cable lock which is purchased separately is designed to act as a deterrent but it may not prevent the computer from being mishandled or stolen Security cable locks are only one of several methods that should be employed as part of a complete security solution to help maximize theft protection The security cable slot on your computer may look slightly different from the illustration in this section For the location of the security cable slot on your computer see Getting to know your computer 1 Loop the security cable lock around a secured object 2 Insert the key 1 into the security cable lock 2 3 Insert the security cable lock into the security cable slot on the computer 3 and then lock the security cable lock with the key 4 Remove the key and k
33. User Guide Copyright 2013 Hewlett Packard Development Company L P Bluetooth is a trademark owned by its proprietor and used by Hewlett Packard Company under license Intel is a trademark of Intel Corporation in the U S and other countries Microsoft and Windows are U S registered trademarks of Microsoft Corporation SD Logo is a trademark of its proprietor The information contained herein is subject to change without notice The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services Nothing herein should be construed as constituting an additional warranty HP shall not be liable for technical or editorial errors or omissions contained herein Second Edition April 2013 First Edition February 2013 Document Part Number 716682 002 Product notice This guide describes features that are common to most models Some features may not be available on your computer Software terms By installing copying downloading or otherwise using any software product preinstalled on this computer you agree to be bound by the terms of the HP End User License Agreement EULA If you do not accept these license terms your sole remedy is to return the entire unused product hardware and software within 14 days for a refund subject to the refund policy of your place of purchase For any further information or to request a full refund of the computer p
34. Using Beats Audio select models only Beats Audio is an enhanced audio feature that provides a deep controlled bass while maintaining a clear sound You can experience Beats Audio through the computer s internal speakers through external speakers connected to a USB port or through Beats Audio headphones connected to the headphone jack Accessing Beats Audio Control Panel Use Beats Audio Control Panel to view and manually control audio and bass settings To open Beats Audio Control Panel Mode Steps 1 Swipe from the right edge of the TouchPad or touch screen select models only to display the ER charms tap Search and then tap the search box 2 Type c select Control Panel select Hardware and Sound and then select Beats Audio Control Panel gay From the Start screen type c select Control Panel select Hardware and Sound and then select p Beats Audio Control Panel Enabling and disabling Beats Audio select models only To enable or disable Beats Audio Mode Steps 1 Swipe from the right edge of the TouchPad or touch screen select models only to display the charms tap Search and then tap the search box Q h tap S h and then tap th hb 2 Press the fn key on the on screen keyboard in combination with the b key gaz 1 From the Start screen type c select Control Panel select Hardware and Sound and then select Beats Audio Control Panel 2 Follow the on screen instructions Checking the sound
35. You can use HP Recovery media to recover the original system This method can be used if your system does not have an HP Recovery partition or if the hard drive is not working properly 1 2 3 If possible back up all personal files Insert the first HP Recovery disc you created into the optical drive on your computer or into an optional external optical drive and then restart the computer Insert the HP Recovery USB flash drive you created into a USB port on your computer and then restart the computer EYNOTE If the computer does not automatically restart in HP Recovery Manager change the computer boot order See Changing the computer boot order on page 74 Follow the on screen instructions Changing the computer boot order If computer does not restart in HP Recovery Manager you can change the computer boot order which is the order of devices listed in BIOS where the computer looks for startup information You can change the selection for an optical drive or a USB flash drive To change the boot order 1 2 3 4 5 Insert the HP Recovery media you created Restart the computer Press and hold esc while the computer is restarting and then press f9 for boot options Select the optical drive or USB flash drive you want to boot from Follow the on screen instructions Removing the HP Recovery partition HP Recovery Manager software allows you to remove the HP Recovery partition to free up hard drive s
36. a page or image e Place two fingers on the screen and then drag them in an up down left or right motion Pinching stretching Pinching and stretching allows you to zoom out or in on images or text e Zoom in by placing two fingers together on the display and then move your fingers apart e Zoom out by placing two fingers apart on the display and then move your fingers together 34 Chapter 5 Navigating using touch gestures pointing devices and the keyboard Rotating select models only Rotating allows you to turn items such as photos e Anchor the forefinger of your left hand on the object you want to rotate Using your right hand slide your forefinger around in a sweeping motion from 12 o clock to 3 o clock To reverse the rotation move your forefinger from 3 o clock to 12 o clock NOTE Rotate is intended for specific apps where you can manipulate an object or image Rotate may not be functional for all apps Edge swipes With edge swipes you can perform tasks such as changing settings and finding or using apps Right edge swipe The right edge swipe reveals the charms which let you search share start apps access devices or change settings e Gently swipe your finger inward from the right edge of the display bezel onto the screen to reveal the charms Using touch screen gestures select models only 35 Left edge swipe The left edge swipe reveals your open apps so that you can switch to them quickly
37. abled at the factory you can use the wireless button to turn on or turn off the wireless devices simultaneously Using operating system controls The Network and Sharing Center allows you to set up a connection or network connect to a network manage wireless networks and diagnose and repair network problems Connecting to a wireless network 15 To use operating system controls Mode Steps 1 Swipe from the right edge of the TouchPad or touch screen select models only to display the charms tap Search and then tap the search box 2 Type network and sharing in the search box and then select Network and Sharing Center ga 1 From the Start screen type n and then select Settings 2 Type network and sharing in the search box and then select Network and Sharing Center For more information from the Start screen type h and then select Help and Support Using a WLAN With a WLAN device you can access a wireless local area network WLAN which is composed of other computers and accessories that are linked by a wireless router or a wireless access point EY NOTE The terms wireless router and wireless access point are often used interchangeably e A large scale WLAN such as a corporate or public WLAN typically uses wireless access points that can accommodate a large number of computers and accessories and can separate critical network functions e A home or small office WLAN typically uses a wireless route
38. ad 8 c cables USB 50 caps lock light identifying 9 caring for your computer 58 checking audio functions 23 cleaning your computer 58 components bottom 13 display 6 left side 5 right side 4 top 8 computer reset 72 computer traveling 45 configuring audio for HDMI 26 connecting to a WLAN 17 connector power 4 corporate WLAN connection 17 critical battery level 45 critical updates software 64 CyberLink PowerDVD 26 D deleted files restoring 71 digital card inserting 51 Disk Cleanup software 55 Disk Defragmenter software 55 E edge swipe gestures 35 bottom edge swipe 36 left edge swipe 36 right edge swipe 35 top edge swipe 36 electrostatic discharge 77 esc key identifying 12 external AC power using 46 external devices 50 F fingerprint reader using 62 fingerprint reader light identifying 9 fingerprint reader identifying 11 fingerprints registering 63 firewall software 64 fn key identifying 12 39 Fun things todo 1 H hard drive HP 3D DriveGuard 55 identifying 13 light 6 HDMI configuring audio 26 HDMI port connecting 25 identifying 21 HDMI pott identifying 5 headphones connecting 22 Hibernation exiting 42 initiated during critical battery level 45 initiating 42 high definition devices connecting 25 26 hot keys bass settings 40 description 39 reveal system information 40 using 39 HP 3D DriveGuard 55 HP and third party software updates installing 64 HP Recovery Manager
39. al HP power supply PYNOTE This product is designed for IT power systems in Norway with phase to phase voltage not exceeding 240 V rms Ey NOTE The computer operating voltage and current can be found on the system regulatory label Operating environment Factor Metric U S Temperature Operating 5 C to 35 C 41 F to 95 F Nonoperating 20 C to 60 C 4 F to 140 F Relative humidity noncondensing Operating 10 to 90 10 to 90 Nonoperating 5 to 95 5 to 95 Maximum altitude unpressurized Input power 75 Operating 15 m to 3 048 m 50 ft to 10 000 ft Nonoperating 15 m to 12 192 m 50 ft to 40 000 ft 76 Chapter 12 Specifications 13 Electrostatic Discharge Electrostatic discharge is the release of static electricity when two objects come into contact for example the shock you receive when you walk across the carpet and touch a metal door knob A discharge of static electricity from fingers or other electrostatic conductors may damage electronic components To prevent damage to the computer damage to a drive or loss of information observe these precautions If removal or installation instructions direct you to unplug the computer unplug it after being properly grounded and before removing a cover Keep components in their electrostatic safe containers until you are ready to install them Avoid touching pins leads and circuitry Handle electronic component
40. all of the recovery DVDs HP Recovery Manager will finish burning the current DVD The next time you start HP Recovery Manager you will be prompted to continue and the remaining discs will be burned To create HP Recovery media 1 From the Start screen type recovery and then select HP Recovery Manager 2 Select Recovery Media Creation and then follow the on screen instructions If you ever need to recover the system see Recovering using HP Recovery Manager on page 73 70 Chapter 11 Backing up restoring and recovering Restore and recovery There are several options for recovering your system Choose the method that best matches your situation and level of expertise If you need to restore your personal files and data you can use Windows File History to restore your information from the backups you created For more information and steps for using File History see Help and Support From the Start screen type h and then select Help and Support If you need to correct a problem with a preinstalled application or driver use the Drivers and Applications Reinstall option of HP Recovery Manager to reinstall the individual application or driver From the Start screen type recovery select HP Recovery Manager select Drivers and Applications Reinstall and then follow the on screen instructions If you want to restore the system to a previous state without losing any personal information Windows System Restore is an option Syst
41. at require a logon e Setup a single sign on service that allows you to use a registered fingerprint to create credentials for any application that requires a user name and password e Setup protected accounts on the computer for multiple users For more information see the HP SimplePass software Help Registering fingerprints To register one or more fingerprints with HP SimplePass 1 Swipe a finger on the fingerprint sensor to launch HP SimplePass or From the Start screen type simple and then select HP SimplePass 2 When the HP SimplePass welcome screen displays click Get Started It s Easy 3 HP SimplePass prompts you to swipe your right index finger over the sensor 4 Swipe your finger 3 times to finish the registration A green circle is displayed on the finger if it is registered successfully 5 To set up a Windows password select Set up Windows logon Using your registered fingerprint to log on to Windows To log on to Windows using your fingerprint 1 After you register your fingerprints restart Windows 2 Swipe any of your registered fingerprints to log on to Windows Using Internet security software When you use your computer to access email a network or the Internet you potentially expose your computer to computer viruses spyware and other online threats To help protect your computer Internet security software that includes antivirus and firewall features may be preinstalled on your computer as a trial of
42. charge select models of cell phones and MP3 players even when the computer is off NOTE AUSB charging port also referred to as a USB powered port allows you to charge connected USB devices Standard USB ports will not charge all USB devices or will charge using a low current Some USB devices require power and require you to use a powered port 9 HDMI port Connects an optional video or audio device such as a high definition television any compatible digital or audio component or a high speed HDMI device 21 Using the webcam select models only Your computer has an integrated webcam a powerful social networking tool that allows you to communicate up close with friends and colleagues next door or on the other side of the world With the webcam You can stream video with your instant messaging software capture and share video and take still photos Mode Steps 1 Swipe from the right edge of the TouchPad or touch screen select models only to display ER the charms tap Search and then tap the search box 2 Type c and then select CyberLink YouCam from the list of applications pa From the Start screen type c and then select CyberLink YouCam from the list of applications For details about using the webcam go to Help and Support From the Start screen type h and then select Help and Support Using audio On your HP computer you can play music CDs download and listen to music stream audio c
43. dineens 38 Using the action keyS iii se dee ES EER GAAR ee ARE Ee ESE Se eed ga ke ee dd 38 Using Microsoft Windows 8 shortcut keys see ee ee Ee ee ee ee ee 39 Using the hot keys select models only ee ee ee ee 39 Using the integrated numeric keypad iese ee AR ee ee ee ee de ee ee ee 40 WANA POWER Ee Ee Oe views RE Oe Ee N EE Ne Ee KRIGE ee ee ee ee 41 Initiating Sleep and Hibernation 20 00 cece tere ee ee ek Re ee ee ee ke ee ee ee Re ee ee ee Re ee ee ke ee ee aa 41 Intel Rapid Start Technology Select models only eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeteeeentaeeeeeees 41 jnitiatingsand exiting Sleep si EE EE Re EE Ee EG EK eg ae Ee Ge N Seg ke devi 42 Enabling and exiting user initiated hibernation oe eee ee ee ee RR ee ee ee ee 42 Setting password protection ON wakeup c cccceccecceeeeeeeeeeeeeeeeeeceacaaaaaaecaecaeeeeeeeeneeteess 43 Using the power meter and power settings iii ee ek ee AR ee AA ee Re ee AR Re ee ee ee ee ee Re ee ee 43 Running on battery DOWEF ese ee Re AR Re Ge AA ee Re ee de ee Re ee de ee Re ee ee ee Re ee ee ee ee ee ee Re ee ee 43 Removing a user replaceable battery ee ee ee AA Re RA ee ee ee ee ee ee ee ee 43 Finding battery INfOrMatlOn siese s ige ske Spes Es bee gee be Eg eg dese ga de dd gee Ee Ge Se dee beg beg 44 Conserving battery DOWED ee ee ee Re tees ee ee RR ee eee ee RR ee ee ee RR ee ee ee be ee ee ee ke ee ee ee 44 Identifying low battery le
44. e connected to the network to access the Internet For help in setting up your WLAN see the information provided by your router manufacturer or your ISP Configuring a wireless router For help in setting up a WLAN see the information provided by your router manufacturer or your ISP EYNOTE It is recommended that you initially connect your new wireless computer to the router by using the network cable provided with the router When the computer successfully connects to the Internet disconnect the cable and access the Internet through your wireless network Protecting your WLAN When you set up a WLAN or access an existing WLAN always enable security features to protect your network from unauthorized access WLANs in public areas hotspots like coffee shops and airports may not provide any security If you are concerned about the security of your computer when connected to a hotspot limit your network activities to email that is not confidential and basic Internet surfing Wireless radio signals travel outside the network so other WLAN devices can pick up unprotected signals Take the following precautions to protect your WLAN Use a firewall A firewall checks both data and requests for data that are sent to your network and discards any suspicious items Firewalls are available in both software and hardware Some networks use a combination of both types e Use wireless encryption Wireless encryption uses securi
45. ect Technology periodically causes the computer to exit Sleep Smart Connect then updates the content for certain open applications As a result your work is immediately available to you as soon as you exit Sleep You do not have to wait while updates are downloaded A To enable this feature or manually adjust the settings from the Start screen type smart and then select Intel Smart Connect Technology Shutting down turning off the computer Z CAUTION Unsaved information is lost when the computer shuts down Be sure to save your work before shutting down the computer The Shut down command closes all open programs including the operating system and then turns off the display and computer HP CoolSense select models only 47 Shut down the computer under any of the following conditions e When you need to replace the battery or access components inside the computer e When you are connecting an external hardware device that does not connect to a USB or video port e When the computer will be unused and disconnected from external power for an extended period Although you can turn off the computer by holding down the power button the recommended procedure to shut down computer is to use the Windows Shut down command EY NOTE If the computer is in the Sleep state or in Hibernation you must first exit Sleep or Hibernation before shutdown is possible by briefly pressing the power button 1 Save your work and close
46. ed port allows you to charge connected USB devices Standard USB ports will not charge all USB devices or will charge using a low current Some USB devices require power and require you to use a powered port NOTE For details about different types of USB ports see Using a USB device on page 49 5 6 USB 3 0 port SS D Memory card reader Connects optional USB 3 0 devices and provide enhanced USB power performance NOTE For details about different types of USB ports see Using a USB device on page 49 Reads data to and from memory cards such as Secure Digital SD Left side 5 Component Description 7 _ Hard drive light e Blinking white The hard drive is being accessed a a e Amber HP 3D DriveGuard has temporarily parked the hard drive NOTE For information about HP 3D DriveGuard see Using HP 3D DriveGuard select models only on page 55 8 Power light e White The computer is on e Blinking white The computer is in the Sleep state which is an energy saving mode The computer shuts off power to the display and other unneeded components e Off The computer is off or in Hibernation Hibernation is an energy saving mode that uses the least amount of power NOTE For select models the Intel Rapid Start Technology feature is enabled at the factory Rapid Start Technology allows your computer to resume quickly from inactivity For more information see Initiating Sleep and
47. ee ee ee ee ee ee ee 65 Using an optional security cable lOCK iese ee AR Re AR Re ee ee Re ee Re ee ee ee Re ee ee ee ee ee 65 10 Using Setup Utility BIOS and System Diagnostics ee RE EER ER RR RE RE EER RR RR EE Ee EER RR RR RE Ee EER KERR RE EE e EER Re ER 66 Starting Setup Utility BIOS oo in ee ee ee ee ee ee ee ee AEEA ee ee ee Ea 66 Updating the BlOS RE RR EE EE EE RE EE EE 66 Determining the BIOS verslON uii iese EER KEES ER GER RR eA EEE 66 Downloading a BIOS update 0000 0 ec ee Re AA ee ee ee ee ee ee ee ee ee ee ee ee 67 Using System Diagnostiese EA es EE og Bu ee AE GEGEE DER ieee OAR gee Ese eg eg ed 67 11 Backing up restoring and recovering iss ee RR EE ER RR RE EER EER RR Ee EER KERR RE E Ee EER RR RR EE Ee EER KERR RE EER RR RR EE Ee EER Re 69 Creating recovery media and backups ee de ee AR Re AA ee AA ee ee ee ee ee ee ee ek ke ee ee 69 Creating HP Recovery media Ete Ek SeSe ee ek ESE ee Ge E ek EEN Ee Ke Ve Oe Ee ERA Ke EE oek 70 viii Restore anid TECOVELY N EE EE EE OE EN 71 Using Windows Refresh for quick and easy recovery ese ee ee ee ee 71 Remove everything and reinstall WindOWS iese ee ee ee ee ee ee ee ee ee 72 Recovering using HP Recovery Manager iese ee dese se ee ed ee ee de ee ee ee ee ee ee ee ee ee ee 73 What you need to KNOW ee ee ke ee ek ke ee ek Re ee ee Re ee ee ek ke ee ee ee ke ee ee 73 Using the HP Recovery partition to recover a minimized image select
48. ee ee ee ek ee ee ee 59 9 Securing your computer and information see ee RE RAAR RR RE EER ER RR KEER REG R RAK RE ERG Gee RARR RE EE e GR RR RR RR Re ae RR RR Ee aa 61 Using PASSWORS EA OR NEE OER NE OE N OR ER RE EE N 61 Setting dae ede ES ie ie RE ER EE R 62 Setting Setup Utility BIOS passwords ie ee ee RR ee ee RR ee ee ee Re de ee ee 62 Using the fingerprint reader ese ee ee Re AR Re ee AA ee Re ee ee be ee ee Re ee ee ee Re ee ee ee ee ee ee ee ee 62 Using HP SimplePass select models only iese ee ee ee ee RR ee ee ee Re ee ee ee 63 Registering fingerprints ss es ENE EREGAS Ee De RAS GP EE AA DE GE ee geed Re ee 63 Using your registered fingerprint to log on to WINdOWS iii ee ee ee 63 Using Internet security SoftWare 2 ies SEER N GR GER ER Le EE RR EENAA Re ee ee GEK RE ee ER ee ee EER 63 Usingantivirus software ESE ES EE He RR De ge AS As Ge GE Ig Eg ee 63 Using firewall software ee ee ee ee Re eee ee ane ee ee Ge RR ee ee ee Re ee ee ee ke ee ee ee RA ee ee ek ee 64 installing software UpdateS ss es Es Ses Des eed Des KS Kou SNR RE ves kaas ese N RR SE av ENE GE E 64 Installing critical security update ies Red de Ke KAS AR Kg AE gee Ge AR 64 Installing HP and third party software updates sesse ee ee de ee ee ee ee ee Re ee ee ee ee ee ee 64 Securing your wireless ie AE dn NkkEn AEEA AA KENANA AENA EEA AKEE AEE 64 Backing up your software applications and information see eek ee ee ee ee
49. eep it in a safe place Backing up your software applications and information 65 10 Using Setup Utility BIOS and System Diagnostics Setup Utility or Basic Input Output System BIOS controls communication between all the input and output devices on the system such as disk drives display keyboard mouse and printer Setup Utility BIOS includes settings for the types of devices installed the startup sequence of the computer and the amount of system and extended memory Starting Setup Utility BIOS To start Setup Utility BIOS turn on or restart the computer quickly press esc and then press f10 Information about how to navigate in Setup Utility BIOS is located at the bottom of the screen EY NOTE Use extreme care when making changes in Setup Utility BIOS Errors can prevent the computer from operating properly Updating the BIOS Updated versions of the BIOS may be available on the HP website Most BIOS updates on the HP website are packaged in compressed files called SoftPaqs Some download packages contain a file named Readme txt which contains information regarding installing and troubleshooting the file Determining the BIOS version To determine whether available BIOS updates contain later BIOS versions than those currently installed on the computer you need to know the version of the system BIOS currently installed BIOS version information also known as ROM date and System BIOS can be revealed by pr
50. ek ee dues 49 Connecting a USB devlC 2e ER AE EE FEE Re ee EE EN Ee Ee GEEN See ee Ee ee ee ee Be de De ee ERGER seek EER Eed 49 Removing a USB device ee ee ee AR ee Ee AA ee ee ee ee ee ee ek ke ee ee ee 50 Connecting a powered USB device ee ee Re RA ee Ge RR ee ee RA ee ee ee 50 Inserting and removing a digital storage card ee ee ek Re ee ee ee Re ee ee ee Re ee ee ee kke ee ee 51 o Maintaining your computo OR EE EE naan useani nk kk ose meee cae 52 Improving performance AE AE EE AE AE EE EE OE OE EN 52 vii Handling GIVES i s ER Ee AR ERENS ed AR EEN SR ER ee RE AN GR EA oe ge ed add 52 Replacing Aa ee ii AE EE ER EE N EE N 52 Using HP 3D DriveGuard select models only eise sesse ee ee ee ee ee GR Re ee ee ee ek Re ee ee ee 55 Using Disk Defragmenter si ss RES KEER SEER GR SE N ee AE Ge ge as Dee ae Ee ee ie ee se N ee 55 dErtedei del RR EE EE OE OE 55 Adding or replacing memory modules iii ee ee ee ee Re ee ee ee ee ee ee Re ee ee 56 Updating programs and drivers sliosan ee ee ee Anana ANNEE ANAA AE ee Re ee AA ee Re ee ee Re ee ee ee ge ee ee 58 Cleaning YOUR Computer sesse Ere ek leat ee ee ees be ee age De GR ee RE ee Bee ese ee EE 58 Cleaning the display sides and COVE ie ee ER ER AR AR Re AA Re ee ee ee ee ee ee ee ee ee 59 Cleaning the TouchPad and keyboard ee ee Re RR ee RR de ee ee 59 Traveling with or shipping Your COMPUTED iese ee ee RR RR ee ee Re ee ee Ge RR ee ee
51. em Restore allows you to restore without the requirements of Windows Refresh or a reinstallation Windows creates system restore points automatically during a Windows update and other system maintenance events Even if you did not manually create a restore point you can choose to restore to a previous point automatically created For more information and steps for using Windows System Restore see Help and Support From the Start screen type h and then select Help and Support If you want a quick and easy way to recover the system without losing your personal information settings or apps that came preinstalled on your computer or were purchased from the Windows Store consider using Windows Refresh This option does not require backing up data to another drive See Using Windows Refresh for quick and easy recovery on page 71 If you want to reset your computer to its original state Windows provides an easy way to remove all personal data apps and settings and reinstall Windows For more information see Remove everything and reinstall Windows on page 72 If you want to reset your computer using a minimized image you can choose the HP Minimized Image Recovery option from the HP Recovery partition select models only or HP Recovery media Minimized Image Recovery installs only drivers and hardware enabling applications Other applications included in the image continue to be available for installation through the Drivers and Applicatio
52. ery Z CAUTION To reduce the risk of damage to a battery do not expose it to high temperatures for extended periods of time If a computer will be unused and unplugged from external power for more than 2 weeks remove the battery and store it separately in a cool dry place to prolong the battery charge A stored battery should be checked every 6 months If the capacity is less than 50 percent recharge the battery before returning it to storage Disposing of a user replaceable battery A WARNING To reduce the risk of fire or burns do not disassemble crush or puncture do not short external contacts do not dispose of in fire or water See the Regulatory Safety and Environmental Notices for proper battery disposal To access this guide from the Start screen type support select the HP Support Assistant app select My computer and then select User guides Running on battery power 45 Replacing a user replaceable battery Battery Check in HP Support Assistant notifies you to replace the battery when an internal cell is not charging properly or when the battery storage capacity has reached a weak condition If the battery is possibly covered by an HP warranty instructions include a warranty ID A message refers you to the HP website for more information about ordering a replacement battery Running on external AC power For information on connecting to AC power refer to the Setup Instructions poster provided in the compu
53. es The keyboard also allows you to use action keys and hot keys to perform specific functions X TIP The Windows key en on the keyboard allows you to quickly return to the Start screen from an open app or the Windows desktop Pressing the Windows key again will return you to the previous screen Setting touch screen preferences select models only 37 NOTE Depending on the country or region your keyboard may have different keys and keyboard functions than those discussed in this section Using the keys Your computer has different ways to quickly access information or perform functions with certain keys and key combinations Using the action keys An action key performs an assigned function The icon on each of the f1 through f4 keys the f5 key select models only and the f6 through f12 keys illustrates the assigned function for that key To use an action key function press and hold the key The action key feature is enabled at the factory You can disable this feature in Setup Utility BIOS See Using Setup Utility BIOS and System Diagnostics on page 66 for instructions on opening Setup Utility BIOS and then follow the instructions at the bottom of the screen To activate the assigned function after you have disabled the action key feature you must press the fn key in combination with the appropriate action key CAUTION Use extreme care when making changes in Setup Utility Errors can prevent the
54. essing fntesc if you are already in Windows or by using Setup Utility BIOS 1 Start Setup Utility BIOS see Starting Setup Utility BIOS on page 66 2 Use the arrow keys to select Main 3 To exit Setup Utility BIOS without saving your changes use the arrow keys to select Exit select Exit Discarding Changes and then press enter 66 Chapter 10 Using Setup Utility BIOS and System Diagnostics Downloading a BIOS update CAUTION To reduce the risk of damage to the computer or an unsuccessful installation download and install a BIOS update only when the computer is connected to reliable external power using the AC adapter Do not download or install a BIOS update while the computer is running on battery power docked in an optional docking device or connected to an optional power source During the download and installation follow these instructions Do not disconnect power from the computer by unplugging the power cord from the AC outlet Do not shut down the computer or initiate Sleep Do not insert remove connect or disconnect any device cable or cord 1 From the Start screen type support and then select the HP Support Assistant app 2 Click Updates and tune ups and then click Check for HP updates now 3 Follow the on screen instructions 4 Atthe download area follow these steps a Identify the most recent BIOS update and compare it to the BIOS version currently installed on your computer I
55. evel the following behavior occurs e The battery light select models only indicates a low or critical battery level 44 Chapter6 Managing power e The power meter icon on the Windows desktop shows a low or critical battery notification EY NOTE For additional information about the power meter see Using the power meter and power settings on page 43 The computer takes the following actions for a critical battery level e If Hibernation is disabled and the computer is on or in the Sleep state the computer remains briefly in the Sleep state and then shuts down and loses any unsaved information e If Hibernation is enabled and the computer is on or in the Sleep state the computer initiates Hibernation Resolving a low battery level Resolving a low battery level when external power is available e Connect an AC adapter e Connect an optional docking or expansion device e Connect an optional power adapter purchased as an accessory from HP Resolving a low battery level when no power source is available Save your work and shut down the computer Resolving a low battery level when the computer cannot exit Hibernation When the computer lacks sufficient power to exit Hibernation follow these steps 1 Replace the discharged user replaceable battery with a charged battery or connect the AC adapter to the computer and to external power 2 Exit Hibernation by pressing the power button Storing a user replaceable batt
56. f and its AC power cord is unplugged 1 Connect the device to the computer 2 Plug the device power cord into a grounded AC outlet 3 Turn on the device To disconnect an unpowered external device stop the device and then disconnect it from the computer To disconnect a powered external device turn off the device disconnect it from the computer and then unplug the AC power cord 50 Chapter 7 Managing and sharing information Inserting and removing a digital storage card To insert a digital storage card CAUTION To reduce the risk of damage to the digital card connectors use minimal force to insert a digital card 1 Hold the card label side up with the connectors facing the computer 2 Insert the card into the digital storage slot and then press in on the card until it is firmly seated a A sound indicates that the device has been detected To remove a digital storage card Z CAUTION To reduce the risk of loss of data or an unresponsive system use the following procedure to safely remove the digital card 1 Save your information and close all programs associated with the digital card 2 From the Windows desktop click the remove hardware icon in the notification area at the far right of the taskbar and then follow the on screen instructions 3 Press in on the card 1 and then remove it from the slot 2 o P L 6 Ey NOTE If the card is not ejected pull the card out of the
57. f the update is more recent than your BIOS make a note of the date name or other identifier You may need this information to locate the update later after it has been downloaded to your hard drive b Follow the on screen instructions to download your selection to the hard drive If the update is more recent than your BIOS make a note of the path to the location on your hard drive where the BIOS update is downloaded You will need to access this path when you are ready to install the update EY NOTE If you connect your computer to a network consult the network administrator before installing any software updates especially system BIOS updates BIOS installation procedures vary Follow any instructions that are revealed on the screen after the download is complete If no instructions are revealed follow these steps 1 From the Start screen type e and then select File Explorer 2 Click your hard drive designation The hard drive designation is typically Local Disk C 3 Using the hard drive path you recorded earlier open the folder on your hard drive that contains the update 4 Double click the file that has an exe extension for example filename exe The BIOS installation begins 5 Complete the installation by following the on screen instructions Ey NOTE After a message on the screen reports a successful installation you can delete the downloaded file from your hard drive Using System Diagnostics System
58. f working wirelessly or if you want to connect to an existing network at your office Connecting to a LAN requires an 8 pin RJ 45 network cable To connect the network cable follow these steps 1 Plug the network cable into the network jack 1 on the computer 18 Chapter 3 Connecting to a network 2 Plug the other end of the network cable into a network wall jack 2 or router NOTE If the network cable contains noise suppression circuitry 3 which prevents interference from TV and radio reception orient the circuitry end of the cable toward the computer Connecting to a wired network 19 4 Enjoying entertainment features Use your HP computer as an entertainment hub to socialize via the webcam enjoy and manage your music and download and watch movies Or to make your computer an even more powerful entertainment center connect external devices like a monitor projector or TV or speakers and headphones Multimedia Features Here are some of the entertainment features on your computer Component Description 1 Internal microphones 2 Record sound 2 Webcam light On The webcam is in use 20 Chapterd Enjoying entertainment features Component 3 HP TrueVision HD Webcam Description Records video and takes still photographs Q CM Swipe from the right edge of the TouchPad or touch screen select models only to display the charms tap Search and then tap the search box
59. face 2 Slide the battery release latch 1 to release the battery Ey NOTE The battery release latch automatically returns to its original position 3 Pivot the battery 2 upward and remove it from the computer of ow Finding battery information To monitor the status of your battery or if the battery is no longer holding a charge run Battery Check in HP Support Assistant To access battery information from the Start screen type support select the HP Support Assistant app and then select Battery and performance HP Support Assistant provides the following tools and information about the battery e Battery test e Information on battery types specifications life cycles and capacity Conserving battery power Tips for conserving battery power and maximizing battery life e Lower the brightness on the display e Select the Power saver setting in Power Options e Remove a user replaceable battery from the computer when it is not being used or charged e Turn off wireless when you are not using them e Disconnect unused external devices that are not plugged into an external power source such as an external hard drive connected to a USB port e Stop disable or remove any external media cards that you are not using e Before you leave your work initiate Sleep or shut down the computer Identifying low battery levels When a battery that is the sole power source for the computer reaches a low or critical battery l
60. fer To provide ongoing protection against newly discovered viruses and other security risks security software must be kept up to date It is strongly recommended that you upgrade the security software trial offer or purchase the software of your choice in order to fully protect your computer Using antivirus software Computer viruses can disable programs utilities or the operating system or cause them to function abnormally Antivirus software can detect most viruses destroy them and in most cases repair any damage they have caused To provide ongoing protection against newly discovered viruses antivirus software must be kept up to date Using Internet security software 63 An antivirus program may be preinstalled on your computer lt is strongly recommended that you use the antivirus program of your choice in order to fully protect your computer For more information about computer viruses from the Start screen type support and then select the HP Support Assistant app Using firewall software Firewalls are designed to prevent unauthorized access to a system or network A firewall can be software you install on your computer and or network or it can be a combination of both hardware and software There are two types of firewalls to consider e Host based firewalls Software that protects only the computer it is installed on e Network based firewalls Installed between your DSL or cable modem and your home network to protec
61. he administrator password to access Setup Utility BIOS Power on password e Must be entered each time you turn on or restart the computer e f you forget your power on password you cannot turn on or restart the computer NOTE The administrator password can be used in place of the power on password NOTE A power on password is not displayed as it is set entered changed or deleted To set change or delete an administrator or power on password in Setup Utility BIOS 1 To start Setup Utility BIOS turn on or restart the computer quickly press esc and then press 10 2 Use the arrow keys to select Security and then follow the on screen instructions Your changes take effect when the computer restarts Using the fingerprint reader Integrated fingerprint readers are available on select computer models In order to use the fingerprint reader you must set up a user account and password on the computer and then register one or more fingerprints using HP SimplePass software For the location of the fingerprint reader on your computer see Getting to know your computer 62 Chapter9 Securing your computer and information Using HP SimplePass select models only HP SimplePass provides an easy to use interface to help secure your computer and simplify the way you log on to your computer and password protected websites Use a registered fingerprint to e Log on to Windows e Access websites and other programs th
62. he far right of the taskbar to verify the name and status of the connection Ey NOTE The functional range how far your wireless signals travel depends on WLAN implementation router manufacturer and interference from other electronic devices or structural barriers such as walls and floors Using Bluetooth wireless devices select models only A Bluetooth device provides short range wireless communications that replace the physical cable connections that traditionally link electronic devices such as the following e Computers desktop notebook PDA e Phones cellular cordless smart phone e Imaging devices printer camera e Audio devices headset speakers e Mouse Bluetooth devices provide peer to peer capability that allows you to set up a PAN of Bluetooth devices For information about configuring and using Bluetooth devices see the Bluetooth software Help Connecting to a wired network There are 2 kinds of wired connections local area network LAN and modem connection A LAN connection uses a network cable and is much faster than a modem connection which uses a telephone cable Both cables are sold separately A WARNING To reduce the risk of electric shock fire or damage to the equipment do not plug a modem cable or telephone cable into an RJ 45 network jack Connecting to a local area network LAN Use a LAN connection if you want to connect the computer directly to a router in your home instead o
63. hen select Warranty and services or go to http www hp com go orderdocuments You can find the expressly provided HP Limited Warranty applicable to your product located with the user guides on your computer and or on the CD DVD provided in the box In some countries regions HP may provide a printed HP Limited Warranty in the box For countries regions where the warranty is not provided in printed format you may request a printed copy from http www hp com go orderdocuments or write to North America Hewlett Packard MS POD 11311 Chinden Blvd Boise ID 83714 USA e Europe Middle East Africa Hewlett Packard POD Via G Di Vittorio 9 20063 Cernusco s Naviglio MI Italy e Asia Pacific Hewlett Packard POD P O Box 200 Alexandra Post Office Singapore 911507 When you request a printed copy of your warranty please include your product number warranty period found on your service label name and postal address IMPORTANT Do NOT return your HP product to the addresses above For U S support go to http www hp com go contactHP For worldwide support go to http welcome hp com country us en wwcontact_us html 2 Chapter 1 Starting right 2 Getting to know your computer Finding your hardware and software information Locating hardware To find out what hardware is installed on your computer 1 From the Start screen type c and then select Control Panel 2 Select System and Security and then in
64. ht listen for the in flight announcement that tells you when you are allowed to use your computer In flight computer use is at the discretion of the airline If you are shipping the computer or a drive use suitable protective packaging and label the package FRAGILE Traveling with or shipping your computer 59 e Ifthe computer has a wireless device installed the use of these devices may be restricted in some environments Such restrictions may apply onboard aircraft in hospitals near explosives and in hazardous locations If you are uncertain of the policy that applies to the use of a particular device ask for authorization to use your computer before you turn it on e Ifyou are traveling internationally follow these suggestions o Check the computer related customs regulations for each country or region on your itinerary o Check the power cord and adapter requirements for each location in which you plan to use the computer Voltage frequency and plug configurations vary A WARNING To reduce the risk of electric shock fire or damage to the equipment do not attempt to power the computer with a voltage converter kit sold for appliances 60 Chapter8 Maintaining your computer 9 Securing your computer and information Computer security is essential for protecting the confidentiality integrity and availability of your information Standard security solutions provided by the Windows operating system HP applications
65. igating with Windows 8 Help and Support e Abroad range of how to information and troubleshooting tips To access Help and Support from the Start screen type h and then select Help and Support For U S support go to http www hp com go contactHP For worldwide support go to http welcome hp com country us en wwcontact_us html Safety amp Comfort Guide e Proper workstation setup To access this guide from the Start screen type e Guidelines for posture and work habits that increase your support select the HP Support Assistant app comfort and decrease your risk of injury select My computer and then select User guides or go to http www hp com ergo e Electrical and mechanical safety information Worldwide support e Online chat with an HP technician To get support in your language go to e Email support http welcome hp com country us en wwcontact us html e Find support telephone numbers e Locate HP service center locations Regulatory Safety and Environmental Notices e Important regulatory notices including proper battery disposal information To access this guide from the Start screen type support select the HP Support Assistant app select My computer and then select User guides Limited Warranty e Specific warranty information about this computer To access this guide from the Start screen type support select the HP Support Assistant app select My computer and t
66. ing a USB device on page 49 3 RJ 45 network jack Connects a network cable 4 RJ 45 network status light AC adapter light White The network is connected Amber Activity is occurring on the network e White The AC adapter is connected and the battery is charged e Amber The AC adapter is connected and the battery is charging e Off The computer is using DC power 5 Power connector Chapter 2 Getting to know your computer Connects an AC adapter Left side OOLOSO Component 1 m Security cable slot Description Attaches an optional security cable to the computer NOTE The security cable is designed to act as a deterrent but it may not prevent the computer from being mishandled or stolen 2 Vents 2 Enable airflow to cool internal components NOTE The computer fan starts up automatically to cool internal components and prevent overheating It is normal for the internal fan to cycle on and off during routine operation 3 HOM HDMI port Connects an optional video or audio device such as a high definition television any compatible digital or audio component or a high speed HDMI device 4 USB 3 0 charging port Connects an optional USB device The USB 3 0 charging port can also charge select models of cell phones and MP3 players even when the computer is off NOTE A USB charging port also referred to as a USB power
67. ion from 12 o clock to 3 o clock To reverse the rotation move your forefinger from 3 o clock to 12 o clock Ey NOTE Rotate is intended for specific apps where you can manipulate an object or image Rotate may not be functional for all apps 2 finger click select models only 2 finger click allows you to make menu selections for an object on the screen e Place two fingers on the TouchPad zone and press down to open the options menu for the selected object 30 Chapter5 Navigating using touch gestures pointing devices and the keyboard Flicking select models only Flicking allows you to navigate through screens or quickly scroll through documents e Place three fingers on the TouchPad zone and flick your fingers in a light quick motion up down left or right Edge swipes Edge swipes allow you to perform tasks such as changing settings and finding or using apps Right edge swipe The right edge swipe reveals the charms which let you search share start apps access devices or change settings e Swipe your finger gently from the right edge to reveal the charms Using TouchPad gestures 31 Top edge swipe The top edge swipe allows you to access All apps available on the Start screen iy IMPORTANT When an app is active the top edge gesture varies depending on the app e Swipe your finger gently from the top edge to reveal available apps Left edge swipe The left edge swipe accesses your recentl
68. keypad To alternate between this numeric function and the navigational function indicated by the directional arrows on the keys press the num lock key 40 Chapter5 Navigating using touch gestures pointing devices and the keyboard 6 Managing power Your computer can operate on either battery power or external power When the computer is only running on battery power and an AC power source is not available to charge the battery it is important to monitor and conserve the battery charge Your computer supports power plans to manage how your computer uses and conserves power so that you can balance computer performance with power conservation Initiating Sleep and Hibernation Microsoft Windows has two power saving states Sleep and Hibernation Sleep tThe Sleep state is automatically initiated after a period of inactivity when running on battery power or on external power Your work is saved to memory allowing you to resume your work very quickly You can also initiate Sleep manually For more information see Initiating and exiting Sleep on page 42 Hibernation The Hibernation state is automatically initiated if the battery reaches a critical level In the Hibernation state your work is saved to a hibernation file and the computer powers down Ey NOTE If you want to initiate Hibernation manually you must enable Hibernation using Power Options For more information see Enabling and exiting user initiated hibernation on
69. lay the recording To confirm or change the audio settings on your computer Mode Steps 1 Swipe from the right edge of the TouchPad or touch screen select models only to display the charms tap Search and then tap the search box 2 Type c and then select Control Panel from the list of applications 3 Select Hardware and Sound and then select Sound Ea 1 From the Start screen type c and then select Control Panel from the list of applications am 2 Select Hardware and Sound and then select Sound Using video Your HP computer is a powerful video device that enables you to watch streaming video from your favorite websites and download video and movies to watch on your computer without needing to connect to a network 24 Chapterd Enjoying entertainment features To enhance your viewing enjoyment use one of the video ports on the computer to connect an external monitor projector or TV Most computers have a video graphics array VGA port which connects analog video devices Some computers also have a high definition multimedia interface HDMI port which allows you to connect a high definition monitor or TV IMPORTANT Be sure that the external device is connected to the correct port on the computer using the correct cable Check the device manufacturer s instructions Connecting an HDMI device Ey NOTE To connect an HDMI device to your computer you need an HDMI cable sold separately To
70. lease contact your local point of sale the seller Safety warning notice NWARNING To reduce the possibility of heat related injuries or of overheating the computer do not place the computer directly on your lap or obstruct the computer air vents Use the computer only on a hard flat surface Do not allow another hard surface such as an adjoining optional printer or a soft surface such as pillows or rugs or clothing to block airflow Also do not allow the AC adapter to come into contact with the skin or a soft surface such as pillows or rugs or clothing during operation The computer and the AC adapter comply with the user accessible surface temperature limits defined by the International Standard for Safety of Information Technology Equipment IEC 60950 iv Safety warning notice Table of contents Start d MODE ES EG Ge Ge Ee GE N EG N GE OG EG ee aunty 1 Best practices AM DEERE es teas EE ts ER AE coe En oust bag cae ns Sadan AG DEE DE AE 1 Fun NGS oe RE ER N EEE ET E 1 More HP TeSOUICES N RE ER EE EE EE EE EE 2 re sae to de your computat AA N Ee N N EE 3 Finding your hardware and software information ese see ee dd ee Re ee AA ee RR Re ee ee ee ee ee ee ee ee Re ee ee 3 Locating hardware ees ee ee ee Re ee AA i n ee Re ee ee ee Re ee ee ee aa 3 LOCALUING SOMWEANG AE OR EE RE 3 RION Sid DERE RT IE EE OR ER RE OE N 4 Bel ME N ME AE NE RE MO EE RE HO EN 5 Bl RR RE RE EE S 6 MOD dee EE OE RE N OE EE LE ER EE
71. m i 2 3 4 5 Save your work and shut down the computer Disconnect all external devices connected to the computer Unplug the power cord from the AC outlet Turn the computer upside down on a flat surface Remove the battery from the computer see Removing a user replaceable battery on page 43 Remove the hard drive 1 Loosen the service door screw 1 lift the service door 2 and then remove it 3 Improving performance 53 2 Disconnect the hard drive cable 1 from the computer 3 Lift the hard drive 2 and then slide it out of the hard drive bay Ey NOTE After removing the hard drive from the computer you must remove the hard drive bracket to access the hard drive itself 4 Remove the hard drive bracket 1 and then disconnect the connector 2 from the hard drive S e am am mm mm mm mm mm mm mm mm mm mm mm N To install a hard drive reverse this procedure 54 Chapter8 Maintaining your computer Using HP 3D DriveGuard select models only HP 3D DriveGuard protects a hard drive by parking the drive and halting data requests under either of the following conditions e You drop the computer e You move the computer with the display closed while the computer is running on battery power A short time after the end of one of these events HP 3D DriveGuard returns the hard drive to normal operation Ey NOTE Hard drives in the primary hard drive bay or in the
72. nd exiting Sleep With the computer on you can initiate Sleep in the following ways Close the display Briefly press the power button pa Swipe from the right edge of the TouchPad or touch screen select models only to display the charms tap Settings tap the Power icon and then tap Sleep From the Start screen point to the upper right or lower right corner of the screen When the charms list opens click Settings click the Power icon and then click Sleep To exit Sleep Briefly press the power button If the display is closed open the display Press a key on the keyboard Tap or swipe the TouchPad When the computer exits Sleep the power lights turn on and the computer returns to the screen where you stopped working y NOTE If you have set a password to be required on wakeup you must enter your Windows password before the computer will return to the screen Enabling and exiting user initiated hibernation You can enable user initiated Hibernation and change other power settings and timeouts using Power Options 1 2 3 4 5 From the Start screen type power select Settings and then select Power Options from the list of applications In the left pane click Choose what the power button does Click Change Settings that are currently unavailable In the When I press the power button area select Hibernate Click Save changes To exit Hibernation briefly press the power button The power lights turn
73. nformation about the computer The regulatory label is located in the battery bay e Wireless certification label or labels Provide information about optional wireless devices and the approval markings of some of the countries or regions in which the devices have been approved for use If your computer model includes one or more wireless devices one or more certification labels are included with your computer You may need this information when traveling internationally Wireless certification labels are located in the battery bay 14 Chapter2 Getting to know your computer 3 Connecting to a network Your computer can travel with you wherever you go But even at home you can explore the globe and access information from millions of websites using your computer and a wired or wireless network connection This chapter will help you get connected to that world Connecting to a wireless network Wireless technology transfers data across radio waves instead of wires Your computer may be equipped with one or more of the following wireless devices e Wireless local area network WLAN device Connects the computer to wireless local area networks commonly referred to as Wi Fi networks wireless LANs or WLANs in corporate offices your home and public places such as airports restaurants coffee shops hotels and universities In a WLAN the mobile wireless device in your computer communicates with a wireless router or a wireless access poin
74. ngs and then select Power Options Different power meter icons indicate whether the computer is running on battery or external power The icon also reveals a message if the battery has reached a low or critical battery level Running on battery power When a charged battery is in the computer and the computer is not plugged into external power the computer runs on battery power If the computer has a charged battery installed and the AC adapter is disconnected from the computer the computer automatically switches to battery power and the display brightness decreases to conserve battery life The battery in the computer slowly discharges when the computer is off and unplugged from external power Computer battery life varies depending on power management settings programs running on the computer display brightness external devices connected to the computer and other factors Removing a user replaceable battery NWARNING To reduce potential safety issues use only the user replaceable battery provided with the computer a replacement battery provided by HP or a compatible battery purchased from HP Using the power meter and power settings 43 CAUTION Removing a user replaceable battery that is the sole power source for the computer can cause loss of information To prevent loss of information save your work or shut down the computer through Windows before removing the battery 1 Turn the computer upside down on a flat sur
75. nly ee ER ee AR Re AA ee ee AA ee Re ee AR be ee ee ee ee ee 22 de Eie oe EE EE EE KO HE EE ER a OE 22 Gonnecting speakers EE EER ER RR Ag Ee SR AR ER Seg SE ed RR GE RGN EG RA eg Ge 22 Connecting headphones ie ee ee EE AR ER Re AA Ge ee ee ee ee Ge ee Re AA Gee ee ee ee ee ee ee 22 Connecting dialie eon eo AA EE ER N N 22 Using Beats Audio select models only ee ee AA ee AA ee RA ee ee ek ee 23 Accessing Beats Audio Control Panel ee ee Re AR ee ee ee ee 23 Enabling and disabling Beats Audio select models only ee ee 23 Checking tie sound EE SES SS ee EE Ee ee Ee ER Ge ES ESE be GE Re gee YE 23 MERE RA ER N ER EK 24 Connecting an HDMI device esse ese se ee ee ee ee ee ee ee ee eee ee ee ee Re AA ee ee ee ee ee ee ee 25 Configuring HDMI audio settings iese ese sees ee ee ee ee ee ee ee 26 Using Intel Wireless Display select models only ee AA ER RR ee AA ee GR ee ee 26 Managing your audio and video files iese ee ee ER AR AA Re Re ee ee ee ee ee ee ee ee ee de ee ee ee ee ee ee ee ee nne 26 5 Navigating using touch gestures pointing devices and the keyboard sccccccessssereeeeeeneeesereeeeneneees 27 Using the TOUCH PAG sis aces ER DERE RD deh AE ee ee DE AR DE ER sees EE Oes ee WEE EERS 27 Using TouchPad gestureS massime GR ge Se AE Ed ees ke ge dd ee SE ee asada ERG Ee de og ee 27 LEETE ol ae S TAE A E EE EE TE 28 SrO es OE RO OE EG 29 PinERING ZOOMING ss EER RS ER ER ENE ER
76. ns Reinstall option in HP Recovery Manager For more information see Recovering using HP Recovery Manager on page 73 If you want to recover the computer s original factory partitioning and content you can choose the System Recovery option from the HP Recovery media For more information see Recovering using HP Recovery Manager on page 73 If you have replaced the hard drive you can use the Factory Reset option of HP Recovery media to restore the factory image to the replacement drive For more information see Recovering using HP Recovery Manager on page 73 If you wish to remove the recovery partition to reclaim hard drive space HP Recovery Manager offers the Remove Recovery Partition option For more information see Removing the HP Recovery partition on page 74 Using Windows Refresh for quick and easy recovery When your computer is not working properly and you need to regain system stability the Windows Refresh option allows you to start fresh and keep what is important to you Restore and recovery 71 IMPORTANT Refresh removes any traditional applications that were not originally installed on the system at the factory NOTE During Refresh a list of removed traditional applications will be saved so that you have a quick way to see what you might need to reinstall See Help and Support for instructions on reinstalling traditional applications From the Start screen type h and then select Help and Support
77. oad the software from the manufacturer s website or reinstall the software from the media provided by the manufacturer Recovery through HP Recovery Manager should be used as a final attempt to correct computer issues HP Recovery media must be used if the computer hard drive fails To use the Factory Reset or System Recovery options you must use HP Recovery media If the HP Recovery media do not work you can obtain recovery media for your system from the HP website For U S support go to http www hp com go contactHP For worldwide support go to http welcome hp com country us en wwcontact_us html IMPORTANT HP Recovery Manager does not automatically provide backups of your personal data Before beginning recovery back up any personal data you wish to retain Using the HP Recovery partition to recover a minimized image select models only The HP Recovery partition select models only allows you to perform a minimized image recovery without the need for recovery discs or a recovery USB flash drive This type of recovery can only be used if the hard drive is still working To start HP Recovery Manager from the HP Recovery partition 1 Press f11 while the computer boots Or Press and hold f11 as you press the power button Select Troubleshoot from the boot options menu Select HP Recovery Manager and follow the on screen instructions Restore and recovery 73 Using HP Recovery media to recover
78. ons To use the Start screen 1 From the Start screen point to the upper right or lower right corner of the screen to reveal the charms 2 Click Settings 3 Click Change PC settings in the bottom right corner of the screen and then select General from the PC settings screen 4 Under Remove everything and reinstall Windows select Get started and follow the on screen instructions 72 Chapter 11 Backing up restoring and recovering Recovering using HP Recovery Manager HP Recovery Manager software allows you to recover the computer to its original factory state Using the HP Recovery media you created you can choose from one of the following recovery options System Recovery Reinstalls the original operating system and then configures the settings for the programs that were installed at the factory Minimized Image Recovery Reinstalls the operating system and all hardware related drivers and software but not other software applications Factory Reset Restores the computer to its original factory state by deleting all information from the hard drive and re creating the partitions Then it reinstalls the operating system and the software that was installed at the factory The HP Recovery partition select models only allows Minimized Image Recovery What you need to know HP Recovery Manager recovers only software that was installed at the factory For software not provided with this computer you must either downl
79. ontent from the web including radio record audio or mix audio and video to create multimedia To enhance your listening enjoyment attach external audio devices such as speakers or headphones Connecting speakers You can attach wired speakers to your computer by connecting them to a USB port or the audio out headphone jack on your computer or on a docking station To connect wireless speakers to your computer follow the device manufacturer s instructions To connect high definition speakers to the computer see Configuring HDMI audio settings on page 26 Before connecting speakers lower the volume setting Connecting headphones You can connect wired headphones to the headphone jack on your computer To connect wireless headphones to your computer follow the device manufacturer s instructions A WARNING To reduce the risk of personal injury lower the volume setting before putting on headphones earbuds or a headset For additional safety information see the Regulatory Safety and Environmental Notices To access this guide from the Start screen type support select the HP Support Assistant app select My computer and then select User guides Connecting a microphone To record audio connect a microphone to the microphone jack on the computer For best results when recording speak directly into the microphone and record sound in a setting free of background noise 22 Chapter 4 Enjoying entertainment features
80. ore it in a secure place away from the computer Do not store passwords in a file on the computer e When creating passwords follow requirements set by the program e Change your passwords at least every three months e An ideal password is long and has letters punctuation symbols and numbers e Before you send your computer for service back up your files delete confidential files and then remove all password settings For additional information about Windows passwords such as screen saver passwords from the Start screen type support and then select the HP Support Assistant app Using passwords 61 Setting Windows passwords Password Function User password Protects access to a Windows user account Administrator password Protects administrator level access to computer contents NOTE This password cannot be used to access Setup Utility BIOS contents Setting Setup Utility BIOS passwords Password Function Administrator password e Must be entered each time you access Setup Utility BIOS e f you forget your administrator password you cannot access Setup Utility BIOS NOTE The administrator password can be used in place of the power on password NOTE Your administrator password is not interchangeable with an administrator password set in Windows nor is it displayed as it is set entered changed or deleted NOTE If you enter the power on password at the first password check you must enter t
81. p searches the hard drive for unnecessary files that you can safely delete to free up disk space and help the computer run more efficiently To run Disk Cleanup 1 From the Start screen type d and then type disk in the search box Select Settings and then select Free up disk space by deleting unnecessary files 2 Follow the on screen instructions Improving performance 55 Adding or replacing memory modules Adding memory can help improve your computer s performance Your computer is like your physical work area The hard drive is the filing cabinet where you store your work and the memory is the desk where you work When your memory isn t big enough to hold all your work easily like a desk overflowing with work your productivity slows down A great solution to improve performance is to expand the amount of memory you have in your computer The computer has two memory module slots The memory module slots are located on the bottom of the computer under the service door The memory capacity of the computer can be upgraded by adding a memory module or replacing the existing memory module in one of the memory module slots Z WARNING To reduce the risk of electric shock and damage to the equipment unplug the power cord and remove all batteries before installing a memory module CAUTION Electrostatic discharge ESD can damage electronic components Before beginning any procedure ensure that you are discharged of static elect
82. pace iy IMPORTANT Removing the HP Recovery partition means you can no longer use Windows Refresh the Windows Remove everything and reinstall Windows option or the HP Recovery Manager option for minimized image recovery Create HP Recovery media before removing the Recovery partition to ensure you have recovery options see Creating HP Recovery media on page 70 Follow these steps to remove the HP Recovery partition 1 2 From the Start screen type recovery and then select HP Recovery Manager Select Remove Recovery Partition and then follow the on screen instructions 74 Chapter 11 Backing up restoring and recovering 12 Specifications Input power The power information in this section may be helpful if you plan to travel internationally with the computer The computer operates on DC power which can be supplied by an AC or a DC power source The AC power source must be rated at 100 240 V 50 60 Hz Although the computer can be powered from a standalone DC power source it should be powered only with an AC adapter or a DC power source supplied and approved by HP for use with this computer The computer can operate on DC power within the following specifications Operating voltage and current varies by platform Input power Rating Operating voltage and current 19 5 V dc 3 33 A 65 W 19 5 V dc 4 62 A 90 W 19 5 V dc 6 15 A 120 W select models only O E O DC plug of extern
83. r which allows several wireless and wired computers to share an Internet connection a printer and files without requiring additional pieces of hardware or software To use the WLAN device in your computer you must connect to a WLAN infrastructure provided through a service provider or a public or corporate network Using an Internet service provider When you are setting up Internet access in your home you must establish an account with an Internet service provider ISP To purchase Internet service and a modem contact a local ISP The ISP will help set up the modem install a network cable to connect your wireless router to the modem and test the Internet service YNOTE Your ISP will give you a user ID and a password to use for Internet access Record this information and store it in a safe place Setting up a WLAN To set up a WLAN and connect to the Internet you need the following equipment e A broadband modem either DSL or cable 1 and high speed Internet service purchased from an Internet service provider e A wireless router 2 purchased separately e A wireless computer 3 EY NOTE Some modems have a built in wireless router Check with your ISP to determine what type of modem you have 16 Chapter 3 Connecting to a network The illustration below shows an example of a wireless network installation that is connected to the Internet As your network grows additional wireless and wired computers can b
84. rDVD 26 Disk Cleanup 55 Disk Defragmenter 55 software updates installing 64 speakers connecting 22 identifying 11 13 21 storing a battery 45 supported discs recovery 70 system information hot key 40 system recovery 73 system restore point creating 69 restoring 71 T temperature 45 testing an AC adapter 46 Touch screen gestures 35 36 edge swipe gestures 35 36 one finger slide 33 pinch 34 80 Index pinching 34 rotating 35 scrolling 34 tapping 33 Touch screen using 33 TouchPad buttons 8 TouchPad gestures pinching 29 rotating 30 scrolling 29 zooming 29 TouchPad zone identifying 8 traveling with the computer 14 45 59 turning off the computer 48 U unresponsive system 48 USB 3 0 ports identifying 4 5 21 USB cable connecting 50 USB devices connecting 49 description 49 removing 50 USB hubs 49 using external AC power 46 using passwords 61 V vents identifying 5 13 video 24 Ww webcam identifying 20 using 22 webcam light identifying 7 20 Windows backup 70 File History 70 71 Refresh 71 reinstall 71 72 remove everything and reinstall option 72 reset 72 restoring files 71 system restore point 69 71 Windows key identifying 12 Windows passwords 62 Wireless Assistant software 15 wireless button 15 wireless certification label 14 wireless controls button 15 operating system 15 Wireless Assistant software 15 wireless light 9 15 wireless network WLAN connecting 1
85. ricity by touching a grounded metal object EY NOTE To use a dual channel configuration with a second memory module be sure that both memory modules are identical To add or replace a memory module CAUTION To prevent information loss or an unresponsive system Shut down the computer before adding or replacing memory modules Do not remove a memory module while the computer is on in the Sleep state or in Hibernation If you are not sure whether the computer is off or in Hibernation turn the computer on by pressing the power button Then shut down the computer through the operating system Save your work and shut down the computer Disconnect all external devices connected to the computer Unplug the power cord from the AC outlet Turn the computer upside down on a flat surface Remove the battery from the computer see Removing a user replaceable battery on page 43 Remove the service door from the computer N MA EN oS S FS S If you are replacing a memory module remove the existing memory module a Pull away the retention clips 1 on each side of the memory module The memory module tilts up 56 Chapter 8 Maintaining your computer b Grasp the edge of the memory module 2 and then gently pull the module out of the memory module slot Z CAUTION To prevent damage to the memory module hold the memory module by the edges only Do not touch the components on the memory module EY NOTE
86. s and the keyboard Icon Key Description rr f9 Plays the previous track of an audio CD or the previous section of a DVD or a BD gt il f10 Begins pauses or resumes playback of an audio CD a DVD or a BD EP f11 Plays the next track of an audio CD or the next section of a DVD or a BD i I i f12 Turns the wireless feature on or off NOTE A wireless network must be set up before a wireless connection is possible Using Microsoft Windows 8 shortcut keys Microsoft Windows 8 provides shortcuts to perform actions quickly Press the Windows key an in combination with the appropriate key to perform the action Shortcut Key Description key PT Returns you to the Start screen from an open app or the Windows Lt desktop NOTE Pressing the key again returns you to the previous screen mud c Reveals the charms ma mud d Opens the Windows desktop ma o Turns Autorotate on or off select models only m ad ma PT tab Switches between open apps ma NOTE Continue to press this key combination until the app you want is revealed alt f4 Closes an active app For additional information on Windows 8 shortcut keys go to Help and Support From the Start screen type h and then select Help and Support Using the hot keys select models only A hot key is a combination of the fn key and the esc key the b key or the spacebar To use a hot key A Briefly press the fn key and then
87. s as little as possible Use nonmagnetic tools Before handling components discharge static electricity by touching an unpainted metal surface of the component If you remove a component place it in an electrostatic safe container If you need more information about static electricity or assistance with component removal or installation contact support 71 Index A AC adapter 4 testing 46 action keys decrease screen brightness 38 Help and Support 38 identifying 12 increase screen brightness 38 next track or section 39 play pause resume 39 previous track or section 39 radiance backlight keyboard 38 switch screen image 38 volume down 38 volume mute 38 volume up 38 wireless 39 airport security devices 52 antivirus software using 63 audio functions checking 23 audio out headphone jacks 4 21 B backing up personal files 70 backing up software and information 65 backups 69 bass settings hot key 40 battery discharging 44 disposing 45 low battery levels 44 replacing 46 storing 45 battery cover release latch 13 battery cover identifying 13 battery information finding 44 battery power 43 battery temperature 45 Beats Audio 23 40 hot key 23 78 Index Beats Audio Control Panel 23 BIOS determining version 66 downloading an update 67 updating 66 Bluetooth device 15 label 14 Bluetooth device 18 boot order changing HP Recovery Manager 74 bottom 14 buttons left TouchPad 8 power 10 right TouchP
88. secondary hard drive bay are protected by HP 3D DriveGuard Hard drives connected to USB ports are not covered by HP 3D DriveGuard For more information see the HP 3D DriveGuard software Help Using Disk Defragmenter As you use your computer over time the files on the hard drive become fragmented A fragmented drive means data on your drive is not contiguous sequential and because of this the hard drive works harder to locate files thus slowing down the computer Disk Defragmenter consolidates or physically reorganizes the fragmented files and folders on the hard drive so that the system can run more efficiently EY NOTE It is not necessary to run Disk Defragmenter on solid state drives After you start Disk Defragmenter it works without supervision However depending on the size of your hard drive and the number of fragmented files Disk Defragmenter may take more than an hour to complete HP recommends defragmenting your hard drive at least once a month You may set Disk Defragmenter to run on a monthly schedule but you can defragment your computer manually at any time To run Disk Defragmenter 1 Connect the computer to AC power 2 From the Start screen type d and then type disk in the search box Select Settings and then select Defragment and optimize your drives 3 Follow the on screen instructions For additional information access the Disk Defragmenter software Help Using Disk Cleanup Disk Cleanu
89. sic and other personal files create a backup of your personal information Windows File History can be set to regularly and automatically back up files from libraries desktop contacts and favorites If files are accidentally deleted from the hard drive and they can no longer be restored from the Recycle Bin or if files become corrupted you can restore the files that you backed up using File History Restoring files is also useful if you ever Creating recovery media and backups 69 choose to reset the computer by reinstalling Windows or choose to recover using HP Recovery Manager EY NOTE File History is not enabled by default so you must turn it on For more information and steps for enabling Windows File History see Help and Support From the Start screen type h and then select Help and Support Creating HP Recovery media HP Recovery Manager is a software program that offers a way to create recovery media after you successfully set up the computer HP Recovery media can be used to perform system recovery if the hard drive becomes corrupted System recovery reinstalls the original operating system and the software programs installed at the factory and then configures the settings for the programs HP Recovery media can also be used to customize the system or aid in the replacement of a hard drive e Only one set of HP Recovery media can be created Handle these recovery tools carefully and keep them in a safe place e HP Reco
90. sing a low current Some USB devices require power and require you to use a powered port Connecting a USB device Z CAUTION To reduce the risk of damage to a USB connector use minimal force to connect the device Using a USB device 49 A Connect the USB cable for the device to the USB port EY NOTE The USB port on your computer may look slightly different from the illustration in this section A sound indicates that the device has been detected Ey NOTE The first ime you connect a USB device a message is revealed on the Windows desktop and an icon appears in the notification area at the far right of the taskbar letting you know that the device is recognized by the computer Removing a USB device CAUTION To reduce the risk of damage to a USB connector do not pull on the cable to remove the USB device CAUTION To reduce the risk of loss of information or an unresponsive system use the following procedure to safely remove the USB device 1 Save your information and close all programs associated with the device 2 From the Windows desktop click the remove hardware icon in the notification area at the far right of the taskbar A message Safely Remove Hardware and Eject Media is revealed Follow the on screen instructions Connecting a powered USB device A CAUTION To reduce the risk of damage to the equipment when connecting a powered device be sure that the device is turned of
91. slot Inserting and removing a digital storage card 51 8 Maintaining your computer It is important to perform regular maintenance to keep your computer in optimal condition This chapter provides information about improving the performance of your computer by running tools such as Disk Defragmenter and Disk Cleanup It also provides information about updating your programs and drivers instructions for cleaning your computer and tips for traveling with your computer Improving performance Everyone wants a fast computer and by performing regular maintenance tasks using tools such as Disk Defragmenter and Disk Cleanup you can drastically improve the performance of your computer Also as your computer gets older you might consider installing larger drives and adding more memory Handling drives Observe these precautions when handling drives Before removing or installing a drive shut down the computer If you are unsure whether the computer is off in the Sleep state or in Hibernation turn the computer on and then shut it down through the operating system Before handling a drive discharge static electricity by touching the unpainted metal surface of the drive Do not touch the connector pins on a removable drive or on the computer Do not use excessive force when inserting a drive into a drive bay When the battery is the only source of power be sure that the battery is sufficiently charged before writing to media
92. t e Bluetooth device select models only Creates a personal area network PAN to connect to other Bluetooth enabled devices such as computers phones printers headsets speakers and cameras In a PAN each device communicates directly with other devices and devices must be relatively close together typically within 10 meters approximately 33 feet of each other For more information about wireless technology see the information and website links provided in Help and Support From the Start screen type h and then select Help and Support Using the wireless controls You can control the wireless devices in your computer using these features e Wireless button wireless switch or wireless key referred to in this chapter as the wireless button e Operating system controls Using the wireless button The computer has a wireless button one or more wireless devices and one or two wireless lights depending on the model All of the wireless devices on your computer are enabled at the factory so the wireless light is on white when you turn on the computer The wireless light indicates the overall power state of your wireless devices not the status of individual devices If the wireless light is white at least one wireless device is on If the wireless light is off all wireless devices are off EY NOTE On some models the wireless light is amber when all wireless devices are off Because the wireless devices are en
93. t all the computers on the network When a firewall is installed on a system all data sent to and from the system is monitored and compared with a set of user defined security criteria Any data that does not meet those criteria is blocked Installing software updates HP Microsoft Windows and third party software installed on your computer should be regularly updated to correct security problems and improve software performance For more information see Updating programs and drivers Installing critical security updates CAUTION Microsoft sends out alerts regarding critical updates To protect the computer from security breaches and computer viruses install all critical updates from Microsoft as soon as you receive an alert You can choose whether updates are installed automatically To change the settings from the Start screen type c and then select Control Panel Select System and Security select Windows Update select Change settings and then follow the on screen instructions Installing HP and third party software updates HP recommends that you regularly update the software and drivers that were originally installed on your computer To download the latest versions go to http www hp com support At this location you can also register to receive automatic update notifications when they become available If you have installed third party software after you purchased your computer regularly update the software
94. ter box The computer does not use battery power when the computer is connected to AC external power with an approved AC adapter or an optional docking expansion device Z WARNING To reduce potential safety issues use only the AC adapter provided with the computer a replacement AC adapter provided by HP or a compatible AC adapter purchased from HP Connect the computer to external AC power under any of the following conditions Z WARNING Do not charge the computer battery while you are onboard aircraft e When charging or calibrating a battery e When installing or modifying system software e When writing information to a disc select models only e When running Disk Defragmenter on computers with internal hard drives e When performing a backup or recovery When you connect the computer to external AC power e The battery begins to charge e The display brightness increases e The power meter icon on the Windows desktop changes appearance When you disconnect external AC power the following events occur e The computer switches to battery power e The display brightness automatically decreases to save battery life e The power meter icon on the Windows desktop changes appearance Troubleshooting power problems Test the AC adapter if the computer exhibits any of the following symptoms when it is connected to AC power e The computer does not turn on e The display does not turn on e The power lights are off
95. tion see Getting to know your computer on page 3 and Enjoying entertainment features on page 20 for information Update or purchase antivirus software Learn more at Using antivirus software on page 63 Back up your hard drive by creating recovery discs or a recovery flash drive See Backing up restoring and recovering on page 69 Fun things to do You know that you can watch a YouTube video on the computer But did you know that you can also connect your computer to a TV or gaming console For more information see Connecting an HDMI device on page 25 You know you can listen to music on the computer But did you know that you can also stream live radio to the computer and listen to music or talk radio from all over the world See Using audio on page 22 Experience music the way the artist intended with deep controlled base and clear pure sound See Using Beats Audio select models only on page 23 Use the TouchPad and the new Windows 8 touch gestures for smooth control of images and pages of text See Using the TouchPad on page 27 and Using TouchPad gestures on page 27 Best practices 1 More HP resources You have already used Setup Instructions to turn on the computer and locate this guide To locate product details how to information and more use this table Resource Contents Setup Instructions e Overview of computer setup and features Windows 8 Basics guide e Overview of using and nav
96. tional external devices using 50 original system recovery 73 P passwords Setup Utility BIOS 62 Windows 62 pinching touch screen gesture 34 TouchPad gesture 29 ports HDMI 5 21 25 Intel Wireless Display 26 USB 3 0 4 5 21 power button identifying 10 power connector identifying 4 power lights identifying 6 9 power battery 43 PowerDVD 26 product name and number computer 14 public WLAN connection 17 R recovery 71 discs 70 74 HP Recovery Manager 73 media 74 starting 73 supported discs 70 system 73 USB flash drive 74 using HP Recovery media 70 recovery media creating 70 creating using HP Recovery Manager 70 recovery partition 73 removing 74 recycle computer 71 72 refresh 71 computer 71 regulatory information regulatory label 14 wireless certification labels 14 remove everything and reinstall Windows 72 reset computer 71 72 steps 72 Index 79 restore Windows File History 71 right edge swipe 35 RJ 45 network jack identifying 4 rotating TouchPad gesture 30 S scrolling TouchPad gesture 29 security cable lock installing 65 security cable slot identifying 5 security wireless 17 serial number 14 service labels locating 14 setting password protection on wakeup 43 setup of WLAN 16 Setup Utility BIOS passwords 62 shipping the computer 59 shutdown 48 Sleep exiting 42 initiating 42 slots memory card 5 security cable 5 software critical updates 64 CyberLink Powe
97. ty settings to encrypt and decrypt data that is transmitted over the network For more information from the Start screen type h and then select Help and Support Connecting to a WLAN To connect to the WLAN follow these steps 1 Be sure that the WLAN device is on If the device is on the wireless light is white If the wireless light is off press the wireless button E NOTE On some models the wireless light is amber when all wireless devices are off 2 From the Windows desktop tap or click the network status icon in the notification area at the far right of the taskbar Connecting to a wireless network 17 Select your WLAN from the list 4 Select Connect If the WLAN is a security enabled WLAN you are prompted to enter a security code Type the code and then select OK to complete the connection Ey NOTE If no WLANs are listed you may be out of range of a wireless router or access point Ey NOTE If you do not see the WLAN you want to connect to from the Windows desktop right click or tap the network status icon and then select Open Network and Sharing Center Select Set up a new connection or network A list of options is revealed allowing you to manually search for and connect to a network or to create a new network connection 5 Follow the on screen instructions to complete the connection After the connection is made place the mouse pointer over the network status icon in the notification area at t
98. ut oil such as a chamois cloth moistened with an alcohol free glass cleaner or use an acceptable germicidal disposable wipe To prevent keys from sticking and to remove dust lint and particles from the keyboard use a can of compressed air with a straw extension NWARNING To reduce the risk of electric shock or damage to internal components do not use a vacuum cleaner attachment to clean the keyboard A vacuum cleaner can deposit household debris on the keyboard surface Traveling with or shipping your computer If you have to travel with or ship your computer here are some tips to keep in mind to keep your equipment safe Prepare the computer for traveling or shipping Back up your information to an external drive Remove all discs and all external media cards such as digital storage cards from the computer Turn off and then disconnect all external devices Shut down the computer Take along a backup of your information Keep the backup separate from the computer When traveling by air carry the computer as hand luggage do not check it in with the rest of your luggage A CAUTION Avoid exposing a drive to magnetic fields Security devices with magnetic fields include airport walk through devices and security wands Airport conveyer belts and similar security devices that check carry on baggage use X rays instead of magnetism and do not damage drives If you plan to use the computer during a flig
99. vels iese see ee ee Re ee ee ee ee ee Re ee ee ee ee ee ee Re ee ee ee ee ee 44 Resolving a low battery level sis Eseg KEES REK Oe SR dee sass AE GAS EER Gegee Ee Kn OE ges Ee Ee dd 45 Resolving a low battery level when external power is available iss 45 Resolving a low battery level when no power source is available 5 45 Resolving a low battery level when the computer cannot exit Hibernation 45 Storing a user replaceable battery 0 0 0 ee Ee eee eee ene eee ee Re ee ee ee Re ee ee ee ke ee ee ee 45 Disposing of a user replaceable battery ie ee AA ee ee ee ee ee Re ee ee ek ee 45 Replacing a user replaceable battery ie ee ee AA ee ee ee Ad ee ee de ee ee ee 46 Running on external AC POWEF ee ee Re Ge AA RR Re ee AA ee RR Re ee ee ee Re ee ee ee Re ee ee ee ee ee 46 Troubleshooting power problems ii EE ER GR GR AR AA Re Re ee ke Gee ee ee ee ee ee 46 HP CoolSense select models Only iese SES ER gs Ede aA eb ee eg ees N eg de vd eg de ee dd 47 Refreshing your software content with Intel Smart Connect Technology select models only 47 Shutting down turning off the computer ie ese ee ee AA ee ee ee ee ee ee ee ee ee ke ee ee ee ee 47 7 Managing and Sharing informati n ss VEE EE KERSE SEEK KEER GEE EER E WEERGEE BE RKE EER EER sasaaa EWE WEEG RE WEEK See WE WEKE Gee 49 Lsinga USB device ies E DE gee ne ee n ae veels E De Ge dus hee ie OE ee Te Oe EES Ee Oe
100. very Manager examines the computer and determines the required storage capacity for the blank USB flash drive or the number of blank DVD discs that will be required e To create recovery discs your computer must have an optical drive with DVD writer capability and you must use only high quality blank DVD R DVD R DVD R DL or DVD R DL discs Do not use rewritable discs such as CDZRW DVD RW double layer DVD RW or BD RE rewritable Blu ray discs they are not compatible with HP Recovery Manager software Or instead you can use a high quality blank USB flash drive e f your computer does not include an integrated optical drive with DVD writer capability but you would like to create DVD recovery media you can use an external optical drive purchased separately to create recovery discs or you can obtain recovery discs for your computer from the HP website For U S support go to http www hp com go contactHP For worldwide support go to http welcome hp com country us en wwcontact_us html If you use an external optical drive it must be connected directly to a USB port on the computer the drive cannot be connected to a USB port on an external device such as a USB hub e Be sure that the computer is connected to AC power before you begin creating the recovery media e The creation process can take up to an hour or more Do not interrupt the creation process e f necessary you can exit the program before you have finished creating
101. y opened apps so that you can switch between them quickly e Swipe your finger gently from the left edge of the TouchPad to switch between them quickly 32 Chapter 5 Navigating using touch gestures pointing devices and the keyboard Using touch screen gestures select models only A touch screen computer allows you to control items on the screen directly with your fingers 29 TIP On touch screen computers you can perform the gestures on the screen or on the TouchPad You can also perform on screen actions with the keyboard and mouse One finger slide The one finger slide is mostly used to pan or scroll through lists and pages but you can use it for other interactions too such as moving an object e To scroll across the screen lightly slide one finger across the screen in the direction you want to move EY NOTE When many apps are revealed on the Start screen you can slide your finger to move the screen left or right e To drag press and hold an object and then drag the object to move it Tapping To make an on screen selection use the tap function e Use one finger to tap an object on the screen to make a selection Double tap an item to open it EY NOTE Press and hold your finger on an object to open a help screen that provides information about the object Using touch screen gestures select models only 33 Scrolling Scrolling is useful for moving the pointer up down left or right on
102. y or region If you replace the module and then receive a warning message remove the module to restore computer functionality and then contact support through Help and Support From the Start screen type h and then select Help and Support Holds the battery Enable airflow to cool internal components NOTE The computer fan starts up automatically to cool internal components and prevent overheating It is normal for the internal fan to cycle on and off during routine operation Releases the battery cover over the battery bay 5 6 HP Triple Bass Reflex Subwoofer Speakers 2 Provides superior bass sound Produce sound Bottom 13 Labels The labels affixed to the computer provide information you may need when you troubleshoot system problems or travel internationally with the computer The labels are in easily accessible locations e Service label Provides important information including the following EY NOTE Your label may look slightly different from the illustration in this section dl Serial XXXXXXXX EIEN NEE AE EN TW Product XXXXXXXX NEER ENE EE D A Warranty lylyOy D Component 1 Product name 2 Serial number 3 Product number 4 Warranty period 5 Model description select models only Have this information available when you contact support The service label is located in the battery bay e Regulatory label Provides regulatory i

HP ENVY 15-j032nr

Contents

Download Pdf Manuals

Related Search

Related Contents