Foster 2012 061 sink
Contents
1. Do not leave iron objects on the sink for long e Please keep this instructions leaflet via M S Ottone n 18 20 42041 Brescello RE Italia2. Foster a Live the Quality INSTRUCTIONS FOR INSTALLATION AND MAINTENANCE Stainless steel sinks Foster spa via M S Ottone 18 20 42041 Brescello RE Italy tel 39 0522 687425 tel Servizio Assistenza 39 0522 684450 fax 39 0522 686019 fax Servizio Ricambi 39 0522 962166 e mail service fosterspa com www fosterspa com Istructions for the installation use and maintenance of kitchen stainless steel sinks Sinks material austenitic stainless steel AISI 304 18 10 UNI EN 13310 2004 kitchen sinks for domestic use functional features and tests methods INSTALLATION Standard and flat 3 mm bended edge Before making any cut out on the worktop we suggest to verify and lay the sink on the worktop itself and or on the cabinets in order to verify that the external dimensions of the bowls are compatible with the cabinets themselves in order to avoid making cut outs for sinks that cannot be installed We also recommend to verify the possibility to install taps and other accessories by checking the place they need and the place that remains Also verify the possibility to accede to the water main tap under the sink and that the positioning of the siphon is feasible To install the sink one must make a cut out on the worktop according to the template included in the packing Once the cut out is made one must position the gasket around the perimeter of the hole Before installing the sink please position the wast
3. e fitting and overflow pipe when present when available also the command of the autiomatic waste fitting must be installed at this stage Make sure that the external edge of the sink is positioned upon the gasket so as to create a barrier preventing f the infiltration of water Ga i og and dirt between sink and worktop ol Tara Bee After having positioned the sink on the worktop fix it by tightening the screws of the brackets which are provided the screws must be tightened just enough to have the brackets clamp down on the worktop Afterwards remove the excess gasket with a cutter The taps can be installed before or after the positioning of the sink After having installed the sink connect the waste fitting with the siphon Check the water tightness by closing the basket of the waste fitting open the tap and wait until the water level reaches the overflow shut the tap and wait several minutes verifying that the water does not drain away Empty the sink Flush mount edge For a correct installation of the flush mount sinks please follow strictly the technical sheet template provided with the sink only qualified personnel should make the cut out and a computer operated machine is necessary It is advisable to accurately clean the seat for the cut out and to insert the gasket which is provided between the sink and the worktop so as to avoid possible water infiltration into the
4. l shine For everyday s maintenance wash the sink with water and soap or a product to wash the dishes rinse abundantly and do not forget to dry For more obstinate dirt the STEEL CLEAN line of products proposed by Foster and available at all our Assistance Centres throughout the Country is very suitable to eliminate it without much fuss Take care to avoid shocks to drop heavy objects on the sink and not to use utensils which can scratch the surface Also avoid the contact with chemicals cleaners for metal products to take off paint metal brushes Do not leave for long stretches of time tomato residues on the sink as well as milk and coffee on the sink also avoid long contacts with metal drums with wet bottoms and iron objects in general Please note that the long contact of any of the above mentioned substances with the sink can originate a corrosive attack of electrochemical nature even though very mild ATTENTION e Rinse accurately after use and dry with a clean cloth e To clean the sink normal detergent can be used as long as not containing hydrochloric Acid commercial Muriatic acid or its derivates e In case of persistant staine try to clean with some warm vinegar or with specific products for Stainless steel the specific line of products Foster Steel clean is suggested e Do not use steel sponges to clean the sink or any other item that could scratch the surface e Avoid using muriatic acid or bleach
5. worktop or the cabinets The work must be carried out by experienced personnel Do notuse electric screwdrivers to tighten the brackets The tightening torque must not exceed 60 N cm It is advisable to install the flush mount sinks on hydro repellent materials in order to avoid eventual deformations of the material itself Undermount installation For the undermount sinks proceed as for the normal built in sinks Make a cut out on the worktop following the template and or instructions provided with the sink Before installing the sink seal with silicone Tighten the brackets ows f 7 2 C 37 Fixing bracket for Fixing bracket lateral section undermount sinks system Fixing system FR FI fixed bracket fixed bracket S FI sliding bracket fixed bracket J CARE and MAINTENANCE The Foster collections are the result of a huge experience and a careful development to meet at best the necessities of the users so as to obtain a high quality product It is important however to inform our customers that one must also use the product correctly and maintain it properly As all materials also stainless steel can become dirty by following very simple instructions one can bring the sink back to its origina
Download Pdf Manuals
Related Search