Philips 32HFL2808D 32" HD-ready Black
Contents
1. flames or sources of intense heat such as 4 an electric heater Excessive sound pressure from earphones and headphones can cause hearing loss Ensure that no open flame sources such as lit candles are placed on top of the TV To prevent injury this TV must be securely attached to the wall in accordance with the installation instructions if the option is available Occasionally a few non active pixels may appear on the screen as a fixed blue green or red point Please note that this does not affect the performance of your product Take care not to scratch the screen with fingernails or other hard objects Before cleaning unplug the TV from the wall socket Only use a soft dry cloth while cleaning Serious injury or death risk Dangerous voltage risk risk Important Correctly the system operate Additional notes marked English 1 Getting Started Installing the Stand 8 Uninstalling the Stand Please read the following information carefully before attaching the stand to your new Television 1 Before fitting the stand ensure that the TV is unplugged from its power source Place the TV on a soft stable and flat surface facing down Place the Stand on the stand mounting pattern on the rear side of the TV Ensure the Stand is placed correctly and that you can see the screw holes on the back of the Television Insert the four screws provided and tighten them gently until the stand is properl2. input signal e g from an aerial or HDMI source for 5 minutes the TV will go into standby When you next switch on the following message will be displayed Standby Cause No Signal Press OK to continue 2 If the TV has been left on and not been operated for a while the TV will go into standby When you next switch on the following message will be displayed Standby Cause No Operation Press OK to continue e Remote controlled colour LED TV Fully integrated digital cable TV DVB T C HDMI inputs are for connecting a device that has a HDMI socket USB input OSD menu system Scart socket for external devices such as DVD Players PVR video games etc e Stereo sound system Teletext Headphone connection Automatic programming system e Manual tuning e Automatic power down after up to six hours e Sleep timer e Child lock Automatic sound mute when no transmission NTSC playback AVL Automatic Volume Limiting PLL Frequency Search PC input Plug amp Play for Windows 98 ME 2000 XP Vista Windows 7 Game Mode Optional Accessories Included Remote Control Batteries 2 x AAA Instruction Book Side AV Connection Cable Quick Start Guide Control Buttons on the TV _ TV Control Switch amp Operation s 2 1 Up direction 2 Down direction 3 Programme Volume A
3. not unplug the TV by pulling the power cord Never touch the power cord plug with wet hands as this could cause a short circuit or electric shock Never make a knot in the power cord or tie it with other cords When damaged it must be replaced this should only be done by qualified personnel Do not use this TV in a humid or damp place Do not expose the TV to liquids If any liquid falls into the cabinet unplug the TV and have it checked by qualified personnel before operating it any further TV Menu Features and Functions 8 9 10 Settings Menu Contents 10 Install and Retune Menu Contents 10 General TV Operation 10 Using the Channel List 10 Electronic Programme Guide EPG 10 Troubleshooting amp Tips 11 AV and HDMI Signal Compatibility 12 PC Typical Display Modes 12 If there is lightning or storms or if the TV is not going to be used for a while e g if going away on holiday disconnect the TV set from the mains The mains plug is used to disconnect TV set from the mains and therefore it must remain readily operable The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance Note Follow the on screen instructions for operating the related features e Do not expose the TV to direct sunlight or other heat sources The TV should not be placed near to open
4. the power cord from the mains socket Note When the TV is switched to standby mode the standby LED can blink to indicate that features such as Standby Search Over Air Download or Timer is active The LED can also blink when you switch on the TV from standby mode First Time Installation When turned on for the first time the language selection screen is displayed Select the desired language and press OK The First Time Installation FTI screen will be displayed next Set your preferences using the navigation buttons and when finished press OK to continue You can activate Store mode optional option to be available in Other settings menu and your TV s features will be illustrated on the top of the screen a confirmation screen will be displayed Select YES to proceed If Home Mode is selected Store mode optional will not be available after the First Time Installation Press OK button to continue Aerial Installation If you select AERIAL option from the Search Type screen the television will search for digital terrestrial TV broadcasts wore You can press MENU button to cancel After all the available stations are stored the Channel List will be displayed on the screen If you like how the channels are sorted according to the LCN please select Yes and than press OK Press MENU button to quit channel list and watch TV LCN is the Logical Channel Number system that organize
5. Automatic software search and upgrade mode While the TV is connected to an aerial signal If Automatic scanning in the Upgrade Options menu is enabled the TV wakes up at 03 00 and searches broadcast channels for new software upgrades If new software is found and downloaded successfully the next time the TV powers up it will have the new software version Note If the TV fails to come on after the upgrade unplug the TV for 2 minutes and plug in again Troubleshooting amp Tips Tv will not turn on Make sure the power cord is plugged in securely to wall outlet The batteries in the remote control may be exhausted Press the Power button on the TV Poor picture e Have you selected the correct TV system e Low signal level can cause picture distortion Please check antenna access e Check if you have entered the correct channel frequency if you have done manual tuning e The picture quality may degrade when two devices are connected to the TV at the same time In such a Case disconnect one of the devices No picture e No Picture means that your TV is not receiving a transmission Have you selected the correct button on the remote control Try once more Also make sure the correct input source has been selected e Is the antenna connected properly e Is the antenna cable damaged e Are suitable plugs used to connect the antenna e If you are in doubt consult your dealer No sound e Has the TV been set to mute
6. Register your product and get support at www philips com welcome 32HFL2808D 12 User manual Mode d emploi Manuale utente Manual del usuario Manual do utilizador Gebruikershandleiding PHILIPS Contents Safety Information Getting Started Notifications 8 Features 8 Accessories N doo Features Control Buttons on the TV Connect Power Remote Control Connections NO oO fF WwW WwW Media Browser Menu Safety Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL To operate your TV in extreme ambient conditions may cause the damage of the device y IMPORTANT Please read these instructions fully before installing or operating A WARNING Never let people including children with reduced physical sensory or mental capabilities or lack of experience and or knowledge use electrical devices unsupervised e For ventilation purposes leave a free space of at least 10 cm all around the set e Do not block ventilation holes e Do not place the TV on sloping or unstable surfaces the TV may tip over Use this device in moderate climates The power cord plug should be easily accessible Do not place the TV furniture etc on the power cord A damaged power cord plug can cause fire or give you an electric shock Handle the power cord by the plug do
7. To cancel mute press the ox button or increase the volume level e Sound is coming from only one speaker Is the balance set to one extreme See Sound Menu section Remote control does not operate e The batteries may be exhausted Replace the bateries Input sources can not be selected If you cannot select an input source it is possible that no device is connected if not Check the AV cables and connections if you have tried to connect a device English 11 PC Input Typical Display Modes The following table is an illustration of some of the typical video display modes Your TV may not support all resolutions Your TV supports up to 1920x1080 Resoiwion Frequency 640x350p 640x400p 1024x768 1280x768 1360x768 720x400 800x600 800x600 1024x768 1024x768 1280x768 1360x768 1280x1024 1280x960 1280x1024 1400x1050 1600x1200 1920x1080 AV and HDMI Signal Compatibility Source Supported Signals Available PAL 50 60 NTSC 60 EXT SCART RGB 50 RGB 60 o o 4 5 e EE Paso o sm o sz o sozsoHz o somzsoHz o o ae Ee o ees A 4801 480P 5761 576P 720P 10801 1080P 4801 480P 576l 576P 720P 10801 PC YPbPr HDMI1 HDMI2 X Not Available O Available In some cases a signal on the LED TV may not be displayed properly Th
8. Tune You can use this setting for fine tuning analogue channels This feature is not available if no analogue channels are stored First Time Installation Deletes all stored channels and settings resets TV to factory settings General TV Operation Using the Channel List The TV sorts all stored stations in the Channel List You can edit this channel list set favourites or set active stations to be listed by using the Channel List options Configuring Parental Settings To prohibit viewing of certain programmes channels and menus can be locked by using the parental control system To display parental lock menu options the PIN number should be entered The factory default PIN number is 0000 After coding the correct PIN number parental settings menu will be displayed Menu Lock optional Menu lock setting enables or disables the menu access Maturity Lock optional When set this option gets the maturity information from the broadcast and if this maturity level is disabled disables access to the broadcast Child Lock optional When Child Lock is set the TV can only be controlled by the remote control In this case the control panel buttons will not work Set PIN Defines a new PIN number Note Ifthe Country option is set to France you can use 4725 as the default code Electronic Programme Guide EPG Some but not all channels send information about the current and next programmes Press
9. V Standby On selection switch The Control button allows you to control the Volume Programme Source and Standby On functions of the TV To change volume Increase the volume by pushing the button up Decrease the volume by pushing the button down English 3 To change channel Press the middle of the button the channel information banner will appear on screen Scroll through the stored channels by pushing the button up or down To change source Press the middle of the button twice the source list will appear on screen Scroll through the available sources by pushing the button up or down To turn the TV off Press the middle of the button down and hold it down for a few seconds the TV will turn into standby mode Inserting the Batteries into the Remote Lift the cover on the back of the remote upward gently Install two AAA batteries Make sure to match the and ends of the batteries in the battery compartment observe the correct polarity Replace the cover Connect Power IMPORTANT The TV set is designed to operate on 220 240V AC 50 Hz socket After unpacking allow the TV set to reach the ambient room temperature before you connect the set to the mains Plug the power cable to the mains socket outlet Antenna Cable Connection Connect the aerial or cable TV plug to AERIAL INPUT ANT socket located on the back of the TV o Notification Manufactured under license from Dolby Labo
10. ding on the contents of the digital teletext Follow i the instructions displayed on digital teletext screen Teletext mix Standby Image Size Sleep Timer Info Reveal in TXT mode Source selection Yellow button Current language in DVB Channel Mono Stereo Dual I II in Analog Channel 8 Blue button Subtitle on off 9 Green button 10 Red button 11 Navigation buttons Subpage in TXT mode 12 OK Hold in Text mod Channel List 13 Return Back Index page in TXT mode 14 Electronic Programme Guide 15 Menu on off 16 Mute 17 Programme up down 18 Previous Programme Now in EPG mode 19 Volume up down 20 Numeric buttons gt Gt Ga pe Go English 5 Getting Started NC vee cm CT i Scart CEEE A 0 Gimo Connection y Y back VGA Connection pi IC ME back SIDE AV ji PC YPbP n j 9 cel gt jel Audio Connection Side Audio Video side Connection Cable PC Audio Cable Supplied Not supplied HDMI Connection m0 ii back a SPDIFF Connection back Side AV Es p Connection lt gt SPDIF SIDE AV side AV Connection Cable supplied Headphone Connection side USB Connection side Cl Connection side nore When connecting a device via the Sid
11. e AV input you must use a connection cables to enable connection See the illustrations above YPbPr can be used only when you connect a device that has a YPbPr output through the PC input with YPbPr to PC cable YPbPr to PC cable is not supplied When the connection is made switch to YPbPr source To enable PC audio you will need to use the SIDE AV CONNECTION cable s WHITE amp RED inputs f an external device is connected via the SCART socket the TV will automatically switch to AV mode When receiving DTV channels Mpeg4 H 264 or while in Media Browser mode output will not be available via the scart socket When using the wall mounting kit optional we recommend that you plug all your cables into the back of the TV before mounting on the wall Insert or remove the Cl module only when the TV is SWITCHED OFF You should refer to the module instruction manual for details of the settings English 6 Getting Started First Time Installation USB Connections Switching On Off To Switch the TV On Connect the power cord to the 220 240V AC 50 Hz To switch on the TV from standby mode either Press the dy button P CH or P CH or a numeric button on the remote control Press the side function switch until the TV comes on from standby To Switch the TV Off Press the ij button on the remote control or press the side function switch until the TV switches into standby mode To power down the TV completely unplug
12. e changed only if the broadcaster supports Enter correct password to change parental settings You can easily adjust menu Parental lock maturity lock may change depending on the country selected and child lock in this menu You can also set new pin number y Sets sleep timer to turn off the TV after a certain time Sets timers for selected programmes Timers USB Record Date Time Sets date and time Sources Enables or disables selected source options Other Settings Displays other setting options of the TV set Menu Timeout Changes timeout duration for menu screens Scan Encrypted Channels When this setting is on the search process will locate the encrypted channels as well Blue Background Activates or deactivates the blue background system when the signal is weak or absent Software Upgrade To ensure that your TV always has the most up to date firmware Application Version Displays application version Hard of Hearing Enables any special feature sent from the broadcaster Audio Description Audio description refers to an additional narration track for blind and visually impaired viewers of visual media including television and movies You can use this feature only if the broadcaster supports that additional narration track Note Audio description sound feature cannot be available in recording or time shifting mode Auto TV Off You can set the timeout value of auto off feat
13. e problem may be an inconsistency with standards from the source equipment DVD Set top box etc If you do experience such a problem please contact your dealer and also the manufacturer of the source equipment 24Hz 25Hz 30Hz 50Hz 60Hz 1080P Supported File Formats for USB Mode Extension Video Audio Maximum resolution Bit rate etc mpg mpeg MPEG1 2 MPEG Layer 1 2 13 dat MPEG1 2 vob MPEG2 MPEG2 mkv H 264 MPEG1 2 4 EAC3 AC3 mp4 H 264 MPEG4 Xvid 1 00 Xvid 1 01 Xvid 1 02 Xvid 1 03 Xvid 1 10 beta1 2 MAX 1920x1080 30P 20Mbit sec PCM MP3 MPEG2 MPEG4 Xvid 1 00 Xvid 1 01 Xvid 1 02 Xvid 1 03 Xvid 1 10 beta1 2 H 264 PCM mp3 MPEG 1 Layer 32Kbps 320Kbps Bit rate 1 2 MP3 Baseline JPEG 32KHz 48KHz Sampling rate max WxH 15300x Progressive JPEG max WxH 9600x6400 3840000bytes max WxH 5760x4096 3840000bytes English 12 PHILIPS All registered and unregistered trademarks are the property of their respective owners Specifications are subject to change without notice Philips and the Philips shield emblem are registered trademarks of Koninklijke Philips Electronics N V and are used under license from Koninklijke Philips Electronics N V 2013 TP Vision Netherlands B V All rights reserved www philips com 28
14. ets the desired colour tone Picture Zoom Sets the desired picture size from picture zoom menu Note Auto Only available in Scart mode with SCART PIN8 high voltage low voltage switching ATA While watching from HDMI source this feature will be visible in the Picture Settings fi menu You can use this feature to enhance blackness in the picture optional Films are recorded at a different number of frames per second to normal Film Mode television programmes Turn this feature on when you are watching films to see the fast motion scenes clearly Skin Tone Skin tone can be changed between 5 and 5 Colour Shift Adjust the desired colour tone RGB Gain You can configure the colour temperature values using the RGB Gain feature Reset Resets the picture settings to factory default settings Except Game Mode Autoposition Automatically optimizes the display Press OK to optimize in PC mode nooo This item shifts the image horizontally to the right hand side or left hand side ofthe screen PC mode do This item shifts the image vertically towards the top or bottom of the screen PC mode Dot Clock in Dot Clock adjustments correct the interference that appear as vertical banding in dot PC mode intensive presentations like spreadsheets or paragraphs or text in smaller fonts A Depending on the resolution and scan frequency that you input to the TV set you may Phase in PC a mode see a
15. hazy or noisy picture on the screen In such a case you can use this item to get a clear picture by trial and error method While in VGA PC mode some items in Picture menu will be unavailable Instead VGA mode settings will be added to the Picture Settings while in PC mode English 8 Sound Menu Contents Volume Adjusts the volume level e Selects the equalizer mode Custom settings can be made only when in user Equalizer mode Balance This setting is used for emphasizing left or right speaker balance Headphone Sets headphone volume Sound Mode You can select a sound mode If the selected channel supports AVL Automatic Volume Limiting Function sets the sound to obtain fixed output level between programmes Headphone Lineout Optional When you connect an external amplifier to your TV using the headphone jack you can select this option as Lineout If you have connected headphones to the TV set this option as Headphone Dynamic Bass Enables or disables the Dynamic Bass Surround Sound Optional Surround sound mode can be changed as On or Off Digital Out Sets digital out audio type Settings Menu Contents Conditional Access Controls conditional access modules when available Configures language settings may change depending on the country selected Language Preferred and current settings will be available Current settings can b
16. he side of the TV Pressing the MENU button while in the Media Browser mode will access the Picture Sound and Settings menu options Pressing the MENU button again will exit from this screen You can set your Media Browser preferences by using the Settings Menu English 7 TV Menu Features and Functions Picture Menu Contents You can change the picture mode to suit your preference or requirements Picture mode Mode can be set to one of these options Cinema Game Sport Dynamic and Natural Contrast Sets the lightness and darkness values of the screen Brightness Sets the brightness value for the screen Sharpness Sets the sharpness value for the objects displayed on the screen Colour Sets the colour value adjusting the colors Power Save To set the Power Save Mode as Eco Picture Off and Disabled Mode When the Mode is Dynamic Power Save mode is automatically set as disabled Backlight This setting controls the backlight level The backlight function will be inactive if the Power a Save Mode is set to Eco The backlight cannot be activated in VGA Media Browser mode Optional f f or while the picture mode is set to Game Noise If the broadcast signal is weak and the picture is noisy use the Noise Reduction Reduction setting to reduce the amount of noise Advanced Settings Dyanmic Contrast You can change the Dynamic Contrast ratio to desired value Colour Temp S
17. ratories TRADEMARK ACKNOWLEDGMENT Dolby and the double D symbol are Y DOLBY trademarks of Dolby Laboratories DIGITAL PLUS HDMI the HDMI logo and High Definition Multimedia Interface ALT trademarks or registered trademarksSuoesnmon mucrmeniainrerrace of HDMI Licensing LLC English Information for Users on Disposal of Old Equipment and Batteries European Union only These symbols indicate that equipment with these symbols should not be disposed of as general household waste If you want to dispose of the product or battery please consider the collection systems or facilities for appropriate recycling Notice The sign Pb below the symbol for batteries indicates that this battery contains lead AX Battery Specification TV Broadcasting PAL B G D K K Receiving Channels VHF BAND NIII UHF annie HYPERBAND Channels Audio Output Power 2x6 WRMS 10 THD Weight rs i TV Dimensions DxLxH 185 x 744 x 492 with foot TV Dimensions DxLxH 41 x 744 x 456 without foot Operation 5 C up to 45 C 85 temperature and humidity max operation humidity 4 Getting Started Remote Control A NOTE The Remote Control range is approximately 7m 23ft Digital Teletext for UK only Press RED button to view digital teletext information Operate it with the coloured buttons cursor buttons and OK button The operation method may differ depen
18. s available broadcasts in accordance with a recognizable channel sequence if available Cable Installation If you select CABLE option and press OK button on the remote control To continue please select YES and press OK To cancel operation select NO and press OK You can select frequency ranges from this screen Enter the frequency range manually by using the numeric button Note Searching duration will change depending on the selected search step Media Playback via USB Input You can connect a 2 5 and 3 5 inch hdd with external power supply external hard disk drives or USB memory stick to your TV by using the USB inputs of the TV IMPORTANT Back up your files before making any connections to the TV Manufacturer will not be responsible for any file damage or data loss Certain types of USB devices e g MP3 Players or USB hard disk drives memory sticks may not be compatible with this TV The TV supports FAT32 and NTFS disk formatting While formatting a USB hard disk that has 1TB Tera Byte or more file capacity you can experience problems with the formatting process Do not repeatedly quickly plug and unplug the drive This may cause physical damage to the USB player and USB device itself Do not pull out USB module while playing a file Media Browser Menu You can play photo music and movie files stored on a USB disk by connecting it to your TV Connect a USB disk to one of the USB inputs located on t
19. the EPG button to view the EPG menu Up Down Left Right Navigate EPG OK Displays programme options INFO Displays in detailed information on the programme selected GREEN Switches to List Schedule EPG YELLOW Switches to Timeline Schedule EPG BLUE Displays filtering options Programme Options In EPG menu press the OK button to enter the Event Options menu Select Channel In EPG menu using this option you can switch to the selected channel English 10 Software Upgrade Your TV is capable of finding and updating automatically via the Aerial Cable signal or over the Internet Software upgrade search via user interface Simply navigate on your main menu Choose Settings and select Other Settings menu In Other Settings menunavigate ontothe Software for Upgrade item and press OK button to check for a new software upgrade Note Internet connection is needed If an internet connection is not available try to upgrade via broadcast If a new upgrade is found it starts to download the upgrade Press OK to continue with the reboot operation Background search and upgrade mode e While TV is connected to Internet in background it searches for critical software upgrades If a critical software upgrade is found it downloads the upgrade silently When download completes with success a message is displayed for reboot operation to activate new software Press OK to continue with the reboot operation
20. ure When the timeout value is reached and the TV has not been operated for a selected time the TV will go into standby mode Standby Search Optional If the Standby Search is set to On when the TV is in standby mode available broadcasts will be searched If the TV locates any new or missing broadcasts a menu screen will be displayed asking you whether or not to execute these changes Channel list will be updated and changed after this process English 9 Store Mode optional If you are displaying the TV in a store you can activate this mode Whilst Store Mode is enabled some items in the TV menu may not be available Power Up Mode This setting confrigures the power up mode preference Virtual Remote optional Enables or disables the virtual remote feature Install and Retune Menu Contents Automatic Channel Scan Retune If available Displays automatic tuning options Digital Aerial Searches and stores aerial DVB stations Digital Cable Searches and stores cable DVB stations Analogue Searches and stores analogue stations Digital Aerial amp Analogue Searches and stores aerial DVB and analogue stations Digital Cable amp Analogue Searches and stores cable DVB and analogue stations Manual Channel Scan This feature can be used for direct broadcast entry Network Channel Scan Searches for the linked channels in the broadcast system Analogue Fine
21. y fitted fig 1 Please read the following information carefully before detaching the stand of your Television 2 Before detaching the stand ensure that the TV is unplugged from its power source Place the Television on a soft stable and flat surface facing down Unscrew gently the four screws that attach the foot assembly and remove the screws when they are completely unscrewed Remove the stand gently from the panel fig 2 English 2 fig 1 fig 2 Getting Started Notifications amp Features amp Accessories Environmental Information This television is designed to consume less energy to help save the environment To reduce energy consumption you should take the following steps If you set the Power Save Mode as Eco the TV will switch to energy saving mode The Power Save Mode settings can be found in the Picture section of the Main Menu Note that some picture settings will be unavailable to be changed If Picture Off is selected Screen will be off in 3 seconds message will be displayed Select PROCEED and press OK to continue The screen will be off immediately When the TV is not in use please switch off or disconnect the TV from the mains plug This will also reduce energy consumption Standby Notifications 1 If the TV does not receive any
Download Pdf Manuals
Related Search