Rode VideoMic Rycote
Contents
1.2. amera shoe connection before attaching to camera 2 Slide the camera shoe into place on the camera mount When the mic is in place secure it by gently tightening the ring clockwise securing the cable Securing the cable will eliminate undesired noise caused by cable movement The cable can be secured in one of two orientations depending on the location of your camera s Audio In socket See diagram 1 for cameras with mic socket on the left See diagram 2 for cameras with mic socket on the right To change the battery gently push and slide the battery cover off Insert a standard 9V battery with the positive end upwards The VideoMic uses a standard 9V battery With a good quality Alkaline or Lithium battery the VideoMic will run for up to 100 continuous hours We recommend you remove the battery if storing your VideoMic for extended periods without use The LED power indicator next to the On Off switch will turn red when the battery is running low The mic will work for approximately one hour once the red indicator is lit however with reduced performance The VideoMic comes with a three position PAD switch which is located inside the battery compartment The PAD provides a selectable 10 or 20db reduction of the input sensitivity reducing the output level when recording loud sound sources so that the optimal level can be achieved in a wide range of situations
3. quickstart guide VideoMic Parts Guide RODE SOUNDBOOTH now for Broadcast mics Hear and compare RODE microphones at www rodemic com soundbooth or on your iPad _ Available on the a App Store 1 Foam windshield 5 LED power indicator 2 Camera shoe mount 6 Power and HPF switch 3 Battery cover 7 Integrated Rycote Lyre suspension R R te 4 PAD switch inside battery compartment 8 3 5mm dual mono output cable y ONBOARD Mic Controls LED power indicator gt TM Mic ON The RODE VideoMic features an integrated 80H _ using High Pass Filter Zr shock mount based on Rycote Lyre technology CG Pr ae 5 ym na lsa y E N a Flat settin Constructed from a single piece ofhard wearing O I na thermoplastic the Lyre provides superior acoustic o DESS Battery OPF ee Mic mute suspension to traditional elastic solutions and will never wear out sag or snap The High Pass Filter HPF P7 is a low frequency cut off setting which you can use to remove rumble camera noise or other low frequency noise while recording RODE I CROPHONES warranty rodemic com videomic www rodemic com mounting to camera Winnie oom 3 Connect the VideoMic s audio lead to the camera s Audio In or Mic socket and secure the cable in place using the in built cable clips see below 1 Turn the tightening ring counter clockwise to loosen the c
Download Pdf Manuals
Related Search