Philips HTL2110
Contents
1. 40 WV Standby power consumption lt 0 5 W Speaker impedance 8 ohm full range e Speaker drivers 4 x 54 5 mm 2 Dimensions WxHxD 845 x 74 5 x 94 mm e Weight 2 0 kg 7 Troubleshooting Warning e Risk of electric shock Never remove the casing of the product To keep the warranty valid never try to repair the product yourself If you have problems using this product check the following points before you request service If you still have a problem get support at www philips com support Sound No sound from SoundBar speakers Connect the audio cable from your SoundBar to your TV or other devices e Reset your SoundBar to its factory settings e On the remote control select the correct audio input e Make sure that the SoundBar is not muted Distorted sound or echo e If you play audio from the TV through the SoundBar make sure that the TV is muted Bluetooth A device cannot connect with the SoundBar e The device does not support the compatible profiles required for the SoundBar You have not enabled the Bluetooth function of the device See the user manual of the device on how to enable the function e The device is not correctly connected Connect the device correctly see Play audio through Bluetooth on page 7 e The SoundBar is already connected with another Bluetooth device Disconnect the connected device then try again Quality2. blinks at a fast rate EN 7 2 On the Bluetooth device switch on Bluetooth search for and select Philips HTL2110 to start connection see the user manual of the Bluetooth device on how to enable Bluetooth e When prompted for a password enter 0000 L gt During connection at a lower rate he indicator blinks 3 Wait until the Bluetooth indicator lights up Ly lf the connection fails the Bluetooth indicator blinks continually at a lower rate 4 Select and play audio files or music on your Bluetooth device During play if a call is coming music play is paused Play resumes when the call ends e If music streaming is interrupted place he Bluetooth device closer to the Soundbar 5 To exit Bluetooth select other source e When your switch back to Bluetooth mode Bluetooth connection remains active e The music streaming may be interrupted by obstacles between the device and SoundBar such as wall metallic casing that covers the device or other devices nearby that operate in the same frequency e Ifyou want to connect your SoundBar with another Bluetooth device disable the currently connected Bluetooth device e Philips does not guarantee 100 compatibility with all Bluetooth devices Auto standby When playing media from a connected device the SoundBar automatically switches to standby if no button is pressed for 30 minutes and no audio play from a connected de
3. secured discontinue use of the product Keep out of reach of children and contact the manufacturer This is CLASS I apparatus with double insulation and no protective earth provided Care for your product Use only microfiber cloth to clean the product Care of the environment ae Your product is designed and manufactured with high quality materials and components which can be recycled and reused i When this crossed out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products Please act according to your local rules and do not dispose of your old products with your normal household waste Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health x Your product contains batteries covered by the European Directive 2006 66 EC which cannot be disposed with normal household waste Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health EN 2 Your SoundBar Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your SoundBar at www philips com we
4. Always there to help you Register your product and get support at www philips com welcome a Question Contact HTL2110 Philips User manual PHILIPS Contents 1 Important Help and support Safety Care for your product Care of the environment WUNNEN 2 Your SoundBar 4 Main unit 4 Remote control 4 Connectors 5 3 Connect 6 Connect audio from TV and other devices 6 4 Use your SoundBar Adjust the volume Choose your sound MP3 player Play audio through Bluetooth Auto standby Apply factory settings D D MN N NNN 5 Wall mount 9 6 Product specifications 0 7 Troubleshooting 1 8 Notice 2 Compliance Trademarks 2 N EN 1 Important Read and understand all instructions before you use your product If damage is caused by failure to follow instructions the warranty does not apply Help and support Philips provides extensive online support Visit our website at www philips com support to e download the user manual and the quick start guide e watch video tutorials available only for selected models e find answers to frequently answered questions FAQs e email us a question e chat with our support representative Follow the instructions on the website to select your language and then enter your product model number Alternatively you can contact Philips Consumer Care in your country Before you contact Philips note down the
5. Press SURR to select a surround mode e Virtual Surround Creates a highly surround listening experience The SURR indicator on the main unit lights up e Stereo Two channel stereo sound Ideal for listening to music Equalizer Change the high frequency treble and low frequency bass settings of the SoundBar Press TREBLE or BASS to change the frequency L gt All Source indicators on the main unit blink twice when treble or bass is set to the maximum or minimum value MP3 player Connect your MP3 player to play your audio files or music What you need e An MP3 player e A 3 5mm stereo audio cable 1 Using the 3 5mm stereo audio cable connect the MP3 player to the AUDIO IN connector on your SoundBar Press AUDIO IN Press the buttons on the MP3 player to select and play audio files or music WN Play audio through Bluetooth Through Bluetooth connect the SoundBar with your Bluetooth device such as an iPad iPhone iPod touch Android phone or laptop and then you can listen to the audio files stored on the device through your SoundBar speakers What you need e A Bluetooth device which supports Bluetooth profile A2DP and with Bluetooth version as 2 1 EDR e The operational range between the SoundBar and a Bluetooth device is approximately 10 meters 30 feet Press Bluetooth on the remote control to switch the SoundBar to Bluetooth mode L gt The Bluetooth indicator
6. ches room temperature before connecting it to the power outlet e Parts of this product can be made of glass Handle with care to avoid injury and damage Risk of overheating ever install this product in a confined space Always leave a space of at least four inches around the product for ventilation Ensure curtains or other objects never cover the ventilation slots on the product Risk of contamination Do not mix batteries old and new or carbon and alkaine etc e Danger of explosion if batteries are incorrectly replaced Replace only with the same or equivalent type e Remove batteries if they are exhausted or if the remote control is not to be used for a long time Batteries contain chemical substances they should be disposed of properly Risk of swallowing batteries The product remote contro may contain a coin button type battery which can be swallowed Keep the battery out of reach of children at all times If swallowed the battery can cause serious injury or death Severe internal burns can occur within two hours of ingestion f you suspect that a battery has been swallowed or placed inside any part of the body seek immediate medical attention When you change the batteries always keep all new and used batteries out of reach of children Ensure that the battery compartment is completely secure after you replace the battery f the battery compartment cannot be completely
7. der license Philips Consumer Lifestyle B V D H Li p S HK 1310 HTL2110 2013 03 Document No Num ro du document Year Month yyyy mm in which the CE mark is affixed Ann e mois aaaa mm au cours de laquelle le marquage CE a t appos EUROPEAN DECLARATION OF CONFORMITY DECLARATION DE CONFORMITE CE We Nous PHILIPS CONSUMER LIFESTYLE B V Company name Nom de l entreprise TUSSENDIEPEN 4 9206 AD DRACHTEN THE NETHERLANDS address adresse declare under our responsibility that the product s d clarons sous notre propre responsabilit que le s produit s Philips HTL2110 12 brand name nom de la marque Type version or model r f rence ou mod le SS Soundbar Speaker product description description du produit to which this declaration relates is in confirmity with the following harmonized standards auquel cette d claration se rapporte est conforme aux normes harmonis es suivantes title number and date of issue of the standard titre num ro et date de parution de la norme EN 60065 2006 A1 2006 A11 2008 A2 2010 A12 2011 EN 55013 2001 A1 2003 A2 2006 EN 55020 2007 A11 2011 EN55022 2010 EN61000 3 2 2006 A1 2009 A2 2009 EN61000 3 3 2008 EN301489 1 V1 9 2 2011 EN301489 17 V2 2 1 2012 EN300328 V1 7 1 2006 EN62479 2010 EN50564 2011 following the provisions of conform ment aux exigences essentielles et autres dispositions pertinentes de 2006 95 EC Low V
8. he TV or other device e The digital optical connector might be labeled SPDIF or SPDIF OUT Option 2 Connect audio through a digital coaxial cable Best quality audio DIGITAL IN COAXIAL IN 1 Using a coaxial cable connect the COAXIAL connector on your SoundBar to the COAXIAL DIGITAL OUT connector on the TV or other device e The digital coaxial connector might be labeled DIGITAL AUDIO OUT Option 3 Connect audio through analog audio cables Basic quality audio 1 Using an analog cable connect the AUX connectors on your SoundBar to the AUDIO OUT connectors on the TV or other device AUX IN AUDIO IN 4 Use your SoundBar This section helps you use the SoundBar to play audio from connected devices Before you start e Make the necessary connections described in the quick start guide and the user manual e Switch the SoundBar to the correct source for other devices Adjust the volume 1 Press VOLUME to increase or decrease a volume level e To mute sound press 1 amp MUTE e To restore the sound press 1 amp MUTE again or press VOLUME L gt All Source indicators on the main unit blink twice when a volume is set to the maximum or minimum value Choose your sound This section helps you choose the ideal sound for your video or music Surround sound mode Experience an immersive audio experience with surround sound modes
9. ion Connectors This section includes an overview of the connectors available on your SoundBar Side right AUDIO IN En O AUDIO IN Audio input from an MP3 player 3 5mm jack Rear connectors AC MAINS 1 AUX Connect to an analog audio output on the TV or an analog device O DIGITAL IN OPTICAL Connect to an optical audio output on the TV or a digital device GB DIGITAL IN COAXIAL Connect to a coaxial audio output on the TV or a digital device 4 AC MAINS Connect to the power supply EN 5 3 Connect This section helps you connect your SoundBar to a TV and other devices For information about the basic connections of your SoundBar and accessories see the quick start guide Note e For identification and supply ratings refer to the type plate at the back or bottom of the product Before you make or change any connections make sure that all devices are disconnected from the power outlet Connect audio from TV and other devices Play audio from TV or other devices through your Soundbar Use the best quality connection available on your TV and other devices Option 1 Connect audio through a digital optical cable Best quality audio DIGITAL IN OPTICAL 1 Using an optical cable connect the OPTICAL connector on your SoundBar to the OPTICAL OUT connector on t
10. lcome Main unit This section includes an overview of the main unit D SURR indicator Lights up when you select Virtual Surround sound O Source indicators Source indicator lights up when a source is selected e COAXIAL Lights up when you switch to coaxial input source e OPTICAL Lights up when you switch to optical input source e AUX Lights up when you switch to analog input source e AUDIO IN Lights up when you switch o audio input source 3 5mm jack G Bluetooth e Lights up when you switch to Bluetooth mode and Bluetooth devices are paired e Blinks when you switch to Bluetooth mode and Bluetooth devices are not paired Remote control This section includes an overview of the remote control fe o g i gs NX re s BASS on DE PHILIPS 4 Standby On Switch the SoundBar on or to standby 2 COAX Switch your audio source to the coaxial connection 3 OPTICAL Switch your audio source to the optical connection Bluetooth Switch to Bluetooth mode TREBLE Increase or decrease treble SURR Toggle between stereo and virtual surround sound amp Mute Mute or restore volume BASS Increase or decrease bass VOLUME Increase or decrease volume AUDIO IN Switch your audio source to audio input connection 3 5mm jack AUX Switch your audio source to the AUX connect
11. model number and serial number of your product You can find this information on the back or bottom of your product Safety Risk of electric shock or fire e Never expose the product and accessories to rain or water Never place liquid containers such as vases near the product If liquids are spilt on or into the product disconnect it from the power outlet immediately Contact Philips Consumer Care to have the product checked before use e Never place the product and accessories near naked flames or other heat sources including direct sunlight e Never insert objects into the ventilation slots or other openings on the product e Where the mains plug or an appliance coupler is used as the disconnect device the disconnect device shall remain readily operable Disconnect the product from the power outlet before lightning storms e When you disconnect the power cord always pull the plug never the cable Risk of short circuit or fire e Before you connect the product to the power outlet ensure that the power voltage matches the value printed on the back or bottom of the product Never connect the product to the power outlet if he voltage is different Risk of injury or damage to the SoundBar e ever place the product or any objects on power cords or on other electrical equipment e If the product is transported in emperatures below 5 C unpack the product and wait until its temperature mat
12. of audio play from a connected Bluetooth device is poor e The Bluetooth reception is poor Move the device closer to the SoundBar or remove any obstacle between the device and the SoundBar The connected Bluetooth device connects and disconnects constantly e The Bluetooth reception is poor Move the device closer to the SoundBar or remove any obstacle between the device and the SoundBar e Turn off Wi Fi function on the Bluetooth device to avoid interference e For some Bluetooth the Bluetooth connection can be deactivated automatically to save power This does not indicate any malfunction of the SoundBar EN 11 8 Notice This section contains the legal and trademark notices Compliance C 0560 This product complies with the radio interference requirements of the European Community Hereby Philips Consumer Lifestyle declares that his product is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC A copy of the EC declaration of Conformity is available in the Portable Document Format PDF version of the user manual at www philips com support Trademarks OI DOLBY DIGITAL Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories Bluetooth The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG Inc and any use of such marks by Philips is un
13. oltage Directive 2004 108 EC EMC directive 1999 5 EC R amp TTE Directive 2011 65 EU RoHS Directive 2009 125 EC Eco Design EC 1275 2008 And are produced under a quality scheme at least in conformity with ISO 9001 or CENELEC Permanent Documents Et sont fabriqu s conform ment a une qualit au moins conforme a la norme ISO 9001 ou aux Documents Permanents CENELEC Only for Medical Devices and R amp TTE products The Notified Body Telefication CE0560 performed NB L Organisme Notifi Name and number nom et num ro a effectu description of intervention description de intervention and issued the certificate 13214025 AA 00 et a d livr le certificat certificate number num ro du certificat Remarks gt yA place date lieu date signature name and function signature nom et fonction Philips Consumer Lifestyle B V template AMB 544 9056 13 Specifications are subject to change without notice 2013 Koninklijke Philips Electronics N V All rights reserved HTL2110_12_UM_V3 0 PHILIPS
14. vice 8 EN Apply factory settings You can reset your SoundBar to the default setting mode 1 In mute mode quickly press AUX twice L gt The factory settings is restored 5 Wall mount e Koninklijke Philips Electronics N V bears no responsibility for improper wall mounting that results in accident injury or damage If you have any query contact Philips Consumer Care in your country Before wall mounting make sure the wall can support the weight of your SoundBar Screw length diameter Depending on the type of wall mounting your SoundBar make sure that you use screws of a suitable length and diameter 13 3 5mm gt 25mm For information about how to wall mount your SoundBar see the quick start guide EN 6 Product Remote control batteries specifications 1x CR2025 Note e Specifications and design are subject to change without notice Amplifier e Total output power 40W RMS 0 5 dB 10 THD e Frequency response 20 Hz 20 kHz 3 dB e Signal to noise ratio gt 65 dB CCIR A weighted e Input sensitivity e AUX 650 mV e AUDIO IN 400 mV Audio e S PDIF Digital audio input e Coaxial IEC 60958 3 Optical TOSLINK Bluetooth e Bluetooth profiles A2DP e Bluetooth version 2 1 EDR Main unit e Power supply 220 240 V 50 Hz Power consumption
Download Pdf Manuals
Related Search