Home

Argoclima Dados 9 Plus

1. LOCAL AIR CONDITIONER 00005 AUS OPERATING INSTRUCTIONS Read the instructions carefully before operating the appliance or carrying out maintenance work Observe all the safety instructions failure to observe the instructions may lead to accidents and or damage Keep these instructions in a safe place for future reference V 02 13 GENERAL OPERATING AND SAFETY INSTRUCTIONS e This appliance is a portable air conditioner designed for domestic use Only use this air conditioner as described in this manual Ensure that the required voltage and frequency 220 240V 50Hz match the available power source Ensure that the electricity system is able to deliver the operating current needed by the air conditioner in addition to that normally absorbed by other appliances electrical appliances lighting etc Please refer to the maximum absorption data given on the air conditioner data plate e Connection to the electricity grid must take place in accordance with current installation standards Ensure that the automatic switches and system protection valves are able to withstand start up current of 10A normally for less than 1 second e The system socket must always be fitted with an efficient earth e Make sure the plug is inserted fully Do not use multiple adapters Do not touch the plug with wet hands Make sure the plug is clean e Do not use the plug as a means by which to star
2. COMPLETE WITH AIR LOUVERS 7 8 INLET GRILLES 9 CONDENSATE DRAIN HOLE Pa 10 HOT AIR OUTLET 11 POWER CORD REAR VIEW SIDE FOR HEATING MODE 12 CONCEALED WHEELS 13 BLUE OPERATING LED 14 TOUCH SCREEN REMOTE CONTROL 7 14 Q 2 Fix Led Operatin Flash ON OFF 1 sec ON 1 sec OFF Stand By Flash ON OFF 1 6 sec ON 1 6 sec OFF Full Tank V 02 13 13 APPLIANCE START UP Open the packaging and remove the box from above Remove the product and the other elements supplied illustrated in the box below Touch Screen remote control Circular connection to be positioned between the end of the tube and the terminal connection A B Flat connection to be positioned between the air expulsion mouth and the flexible hose positioned between the window leafs Hebo 89 28 88 Flat connection Type AAA batteries for the remote control i Opening kit for installation in window also for double glazing Flat connection to be positioned between the air expulsion mouth and the flexible divided up into two parts A and B to be joined hose easily applicable thanks to the convenient magnet system P
3. protects the compressor from any damages IMPORTANT To operate in Cooling Dehumidifying and Fan mode the air conditioner must be positioned with the air outlet fitted with deflectors positioned to the front To operate in Heating mode the appliance must be rotated 180 so as to have the air outlet without deflectors to the front using the remote control or Power switch on the control panel select the Heating mode see the chapter entitled OPERATION Dehumidifying THE DISCHARGE TUBE MUST BE CONNECTED to the appliance AT ALL TIMES the only exception is when the appliance is used for Dehumidification only in which case it is recommended that the appliance discharges directly into the environment to obtain maximum efficiency see the paragraph entitled Dehumidification Mode Clean the air filters under the easily removable side panels regularly to keep the air conditioner working efficiently OPERATING MODES 1 COOLING MODE aK e The first time it is turned on the air conditioner will operate in Cooling mode with the temperature set to 25 C by default e The temperature can be adjusted between 17 and 30 C e In this way each time the Power button is pressed the unit switches off the appliance saves the temperature set and when switched back on again it will retain this setting e In this way fan speed can be adjusted the Timer ECO function can be set 2 DEHUMIDIFICATION MODE Press FUNCT to selec
4. appliance will start to operate as it was last set save function 6 ECO BUTTON energy saving function 1 By pressing the button once the unit enters eco mode and the display shows the icon 2 by pressing the button a second time the unit leaves eco mode and the icon disappears from the display When activating the ECO function in Cooling mode the temperature set increases automatically by 0 5 C every half hour for the next 2 hours it then remains stable for the rest of the time When activating the ECO function in Heating mode the temperature set decreases automatically by 0 5 C every half hour for the next 2 hours it then remains stable for the rest of the time 2 Each time the electricity power supply is disconnected eco mode is cancelled To restore simply press the ECO button once Each time the appliance is switched off eco mode is cancelled To restore simply press the ECO button once 7 TIMER BUTTON TIMER ON TIMER OFF 1 Timer on auto on When the appliance is on stand by set the time remaining before the unit is to switch on can be set e Select a number of hours from 1 to 24 e the TIMER button consecutively and the number of hours increases by 1 each time it is pressed to 24 e Press the Power button before the time expires and the setting will be cancelled and unit will start operating 2 Timer off auto off When the appliance is on set the time remaining before the unit i
5. obligation is underlined by the crossed out dustbin symbol appearing on the battery Illegal disposal of the product by the user shall result in the application of administrative sanctions as defined by current regulations FOR OPTIMAL REMOTE CONTROL FUNCTION POINT THE HEAD OF THE TRANSMITTER TOWARDS THE RECEIVER ON THE AIR CONDITIONER Remote control receiver Transmitter head 1 SIGNAL TRANSMITTER 2 FUNCTION DISPLAY 3 FUNCTION SELECTION BUTTON FUNCT Press this button to select the different operating modes according to the following sequence Cooling Dehumidification Heating 1 Fan V 02 13 17 4 TEMPERATURE ADJUSTMENT BUTTON A v Increase A 1 Enables the adjustment of the temperature desired in Cooling and Heating modes 2 Each time the button is pressed the temperature set increases by 1 C by holding the button pressed the temperature increases continuously Decrease V 1 Enables the adjustment of the temperature desired in Cooling and Heating modes 2 Each time the button is pressed the temperature set increases by 1 C by holding the button pressed the temperature increases continuously 5 ON OFF BUTTON POWER Press the POWER button to switch the unit on or off When switched on the
6. a vertical position If not possible lie it on its right side when you reach your destination immediately return the appliance to a vertical position and wait at least 4 hours before using it to cool 5 For complete safety regularly check the condition of the power cord if it should be damaged through use to replace it contact the Service Centre ADVICE FOR MAXIMUM COMFORT AND MINIMUM CONSUMPTION CHECK that e the unit suction and delivery grilles are always free e the air filters are always clean a dirty filter will decrease the passage of air and reduce the unit performance e doors and windows are closed to avoid the infiltration of unconditioned air e flexible hose is correctly positioned without sharp bends or curves e the room temperature is above 17 C for cooling 5 C for Heating and Dehumidification F GAS REGULATION EC no 842 2006 Do not release R410A into the atmosphere R410A is a fluorinated greenhouse gas covered by the Kyoto protocol with a global warming potential GWP of 1975 DIRECTIVE 2002 96 EC When this appliance reaches the end of its useful life it must not be disposed of with household waste It must cz be delivered to appropriate separated waste disposal plants or to dealers that provide a similar service Separate waste disposal of an electrical appliance prevents potential negative effects on the environment and human health resulting from inadequate disp
7. an be set TO USE THE AIR CONDITIONER IN HEATING MODE ROTATE THE PRODUCT 180 AROUND ITSELF AND CONNECT THE CONNECTOR AND THE FLEXIBLE HOSE AS USUAL THEN SELECT THE HEATING FUNCTION ON THE REMOTE CONTROL OR IF YOU DO NOT HAVE A REMOTE CONTROL ON THE CONTROL PANEL 4 FAN MODE 5 Press FUNCT to select Fan until the relevant icon appears e When the unit operates in this mode the display will show FF and the icon 5 lights This enables the adjustment of fan speed e The temperature cannot be regulated HOW TO ELIMINATE CONDENSATE This equipment automatically vaporises the condensation in Cooling and Heating mode Ensure that when the unit operates as Cooling or Heating the rubber cap that closes the discharge hole at the back is correctly positioned When the air conditioner operates on Cooling and Heating there is no need to arrange for continuous drainage of condensate only in specific weather conditions where air humidity levels are very high may water deposit within the unit When the internal tank is full the blue LED flashes to warn that it is full and blocks the appliance function To empty the container switch the air conditioner off and unplug Remove the rear drainage hole cap and connect a little tube through which to drain the condensation place the other end on top of a normal drain Ensure that the tube is not twisted or bent The tube must slope downwards Close the drain again with the cap and resume u
8. les on a firm flat surface to avoid water leaks e The air conditioner is fitted with a system to protect the compressor from overload This means that the compressor only starts once 3 5 minutes have passed from its previous stop e Please wait at least 3 5 minutes before starting the unit This helps prevent the compressor from being damaged WARNING In the event of an anomaly switch the appliance off and unplug from the socket Do not dismantle or attempt to repair or modify the product In the event of a malfunction contact the after sales service centre directly WARNING e Do not expose the air conditioner to direct sunlight as the colour of the materials may change and if the appliance overheats this may activate the protection mechanism causing it to switch off e Do not use insecticides oils detergents or spray paints near the appliance do not use aggressive chemical detergents to clean the casing this may damage the finish and colour e Close all open windows to maximise air conditioning efficiency The manufacturer will not be held liable if safety and accident prevention rules are not observed V 02 13 12 DESCRIPTION OF THE APPLIANCE FRONT VIEW SIDE FOR COOLING DEHUMIDIFYING FAN MODES 3 1 CONTROL PANEL FUNCTION BUTTONS FOR OPERATION WITHOUT REMOTE 1 3 CONTROL 3 TERMINAL CONNECTOR OF THE AIR EXPULSION TUBE 9 6 4 AIR EXPULSION TUBE 5 REMOTE CONTROL RECEIVER 6 COOL AIR OUTLET
9. osal and also allows the materials from which it is made to be recovered and recycled in order to achieve significant savings in terms of energy and resources The separate disposal obligation is underlined by the crossed out dustbin symbol appearing on the product Illegal disposal of the product by the user shall result in the application of administrative sanctions as defined by current regulations X INFORMATION FOR THE CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EUROPEAN improve your life www argoclima com V 02 13 20
10. osition the product vertically on a firm flat surface as close to a window as possible keeping a minimum distance of 50 cm from walls or other nearby obstacles Connect the connection 1 to the flexible hose 2 extend the hose as necessary to reach the outside and connect it to the back of the air conditioner USE WITH TERMINAL CONNECTION FOR WINDOW Connect the end part of the flexible hose to the terminal connection 4 Open the windows and block one of the two leafs with the handle 5 Rest the terminal connection the fixed leaf bring the other leaf of the 4 window close USE WITH THE WINDOW OPENING KIT Connect the end part of the flexible hose to the circular connection 3 e Make a hole with a diameter of 140 mm in the window glass e Insert the window without its closure cap e Remove the hot air terminal connection from the retracting flexible hose e Bring the air conditioner close to the window and insert the air discharge tube Avoid tight curves and folds in the flexible hose Connect the power cord to a suitable electrical socket 230V Insert the batteries supplied into the remote control respecting polarities V 02 13 14 HOW TO USE THE APPLIANCE This appliance can be used to Cool Dehumidify Fan and Heat In changing from one mode to another the fan continues operating but the compressor stops the compressor starts up again 3 and a half minutes later This delay in start up
11. s to switch on can be set e Select a number of hours from 1 to 24 e Press the TIMER button consecutively and the number of hours increases by 1 each time it is pressed to 24 e the Power button before the time expires and the setting will be cancelled and unit will switch off 8 AUTO BUTTON Automatically regulates fan speed to 3 possible levels Low LO Medium MED High 9 HIGH BUTTON selects high fan speed HI appears on the display 10 MED BUTTON selects medium fan speed MED appears on the display 11 LOW BUTTON selects low fan speed LO appears on the display V 02 13 18 OPERATION WITHOUT A REMOTE CONTROL If the remote control is not working or has been lost the button on the control panel can be used POWER 1 POWER BUTTON SWITCHING ON FUNCTION SELECTION Cooling Heating Fan Switching off By pressing this button consecutively on the control panel the unit is activated cooling mode is selected heating mode is selected ventilation mode is selected and finally the appliance is deactivated For Dehumidification mode always use the remote control CARE AND MAINTENANCE WARNING Before carrying out any cleaning or maintenance unplug from the electric socket 1 Cleaning the air filters The air filters must be checked at least once every two weeks of use Operating with dirty or blocked filters will decrease the effectiveness of the air conditioner and can cau
12. se of the air conditioner ATTENTION When using the air conditioner in Dehumidification mode we recommend always ensuring continuous drainage in order to guarantee maximum dehumidification efficiency V 02 13 16 REMOTE CONTROL OPERATION Insert the batteries into the remote control respecting polarities specified Only use type AAA or IEC R03 1 5V batteries Remove the batteries if the remote control is not used for a month or longer x a Do not attempt to recharge the batteries Change all batteries at the same time S Do not throw batteries onto a fire they may explode i INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EUROPEAN DIRECTIVE 2006 66 EC X Please replace batteries when flat at the end of their useful life batteries must not be disposed of with unsorted waste It must be must be delivered to appropriate separated waste disposal plants or to dealers that provide a similar service Separate waste disposal of batteries prevents potential negative effects on the environment and human health resulting from inadequate disposal and also allows the materials from which it is made to be recovered and recycled in order to achieve significant savings in terms of energy and resources The separate disposal
13. se serious problems To remove the filters release the two upper sides of the side suction grilles and leave them in an inclined position resting on the lower side now remove the filters pulling them delicately upwards Use a vacuum cleaner to remove dust If this should not suffice wash the filters with warm water and a neutral detergent if necessary Rinse with cold water and leave to air dry before replacing Once the two filters have been replaced close the grilles once again and return to using the air conditioner 2 Cleaning the casing Use a damp and soft cloth to clean the exterior surface of the air conditioner Do not use waiter that is too hot solvents petrol or other aggressive chemical compounds talcum powder or brushes these may damage the surface or colour of the casing To remove stains use warm water with a little neutral detergent Do not pour water onto the air conditioner to clean it this may damage the internal components or cause a short circuit 3 Storage When you do not envisage using the air conditioner for a long time before storing it away clean the filters Keep the appliance in a vertical position at all times Do not rest heavy objects on the top and if possible protect the air conditioner with a sheet of plastic V 02 13 19 4 Transport If possible transport the air conditioner in
14. t Dehumidification until the relevant icon appears e The temperature is controlled by the electronic card and cannot be regulated In this way each time the Power button is pressed the unit switches off the appliance saves the settings and when switched back on again it will retain them e Fan speed is fixed to low and cannot be adjusted NOTE The air conditioner does not cool the environment when operating as a dehumidifier When the appliance is used as a dehumidifier the flexible hose must not be connected For maximum dehumidification efficiency leave the rear discharge attachment free to discharge directly into the environment Dehumidification mode is recommended in autumn and winter If used in the summer it is best to leave the flexible hose attached in order to send the hot air outside rather than releasing it into the environment During dehumidification it is best to ensure continuous drainage see paragraph entitled HOW TO ELIMINATE CONDENSATION V 02 13 15 3 HEATING 1 Press FUNCT to select Heating until the relevant icon appears e By default the temperature is set to 25 C e The temperature can be adjusted between 15 and 25 C In this way each time the Power button is pressed the unit switches off the appliance saves the temperature set and when switched back on again it will retain this setting In this way fan speed can be adjusted the Timer ECO function c
15. t stop the air conditioner use the power button on the remote control or on the side control panel under the intake grille e Do not install the air conditioner in rooms that may be subject to water spray e g laundries e This appliance is not suitable for use by persons including children with reduced physical sensory or mental abilities or persons without the necessary experience and knowledge unless they have been adequately supervised and instructed concerning the use of the appliance by a person responsible for their safety e Before moving or cleaning ensure that the device is unplugged from the socket e Do not move the air conditioner while it is operating first turn the appliance off check and remove any condensation that may have formed e To turn the appliance off set the remote control to OFF and remove the plug from the socket Only pull on the plug Do not pull the cord e Do not use the appliance if the cord or plug are damaged If the power supply cord is damaged it must be replaced by the manufacturer dealer or a similarly qualified person so as to avoid any safety risks PRECAUTION e Do not insert any objects into the air conditioner this is very dangerous as the fan turns very quickly e Ensure that air circulates freely around the unit Do not cover the air intake and delivery grilles with drapes or in any way WARNING e The air conditioner must be positioned at least 50 cm from the wall and any other obstac

Argoclima Dados 9 Plus

Contents

Download Pdf Manuals

Related Search

Related Contents