LG 32LN5300 31.5" Full HD Black LED TV
Contents
1. Model 32LN520B 39LN5300 32LN530B 42LN5200 32LN5300 42LN5300 42LN5400 VESA A x B 200 x 100 200 x 200 N B j Standard screw M4 M6 Number of screws 4 4 Wall mount bracket LSW130B LSW230B optional N CAUTION e Disconnect the power before moving or installing the TV Otherwise electric shock may occur e If you install the TV on a ceiling or slanted wall it may fall and result in severe injury Use an authorized LG wall mount and contact the local dealer or qualified personnel e Do not over tighten the screws as this may cause damage to the TV and void your warranty e Use the screws and wall mounts that meet the VESA standard Any damages or injuries by misuse or using an improper accessory are not covered by the warranty Q note e Use the screws that are listed in the VESA standard screw specifications e The wall mount kit includes an installation manual and necessary parts e The wall mount bracket is optional You can obtain additional accessories from your local dealer e The length of screws may differ depending on the wall mount Make sure to use the proper length e For more information refer to the manual supplied with the wall mount m Zz A n a5 HSITION3 16 MAKING CONNECTIONS MAKING CONNECTIONS You can connect various external devices to the TV Supported external devices are HD receivers DVD players VCRs2. LG Life s Good l OWNER S MANUAL l LED TV LG LED TV applies LCD screen with LED backlights Please read this manual carefully before operating your set and retain it for future reference 32LN520B 32LN530B 42LN5400 42LN5200 32LN5300 47 LN5400 39LN5300 5OLN5400 42LN5300 55LN5400 P NO MFL67651192 1301 REVOO www lg com 2 IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product HSIIONA3 RISK OF ELECTRIC SHOCK DO NOT OPEN ps WARNING CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol Aw an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance WARNING CAUTION TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE A WARNING If you ignore the warning message you may be seriously injured or there is a poss
3. Control buttons W gt Il lt 4 gt gt Controls SIMPLINK compatible devices USB SIMPLINK Color buttons These access special functions in some menus B Red Green Yellow Blue HSIION3 26 WATCHING TV WATCH NG TV 4 When the basic settings are complete press the OK Q note e If you do not complete the Initial setting it will appear whenever the TV turns on e Disconnect the power cord from the power outlet When you turn the TV on for the first time the Initial when you do not use the TV for a long period of setting screen appears Select a language and customize time Turning the TV on for the first time the basic settings 1 Connect the power cord to a power outlet 5 To turn the TV off press the power button on the remote control 2 In Standby mode press the power button on the remote control to turn the TV on The Initial setting screen appears when you turn the TV on for the first time Q note e You can also access Initial Setting by accessing OPTION in the main menu 3 Follow the on screen instructions to customize your TV settings according to your preferences Language Selects a language to display g Mode Setting Selects Home Use for the home g environment Time Setting Selects the time zone and daylight y saving Auto Tuning Scans and saves available channels automatically Q note To display images in t
4. audio systems USB storage devices PC gaming devices and other external devices For more information on external device s connection refer to the manual provided with each device Q note e If you record a TV program on a DVD recorder or VCR make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR For more information of recording refer to the manual provided with the connected device e The external device connections shown may differ slightly from illustrations in this manual e Connect external devices to the TV regardless of the order of the TV port e If you connect a gaming device to the TV use the cable supplied with the gaming device e Refer to the external equipment s manual for operating instructions Connecting to an antenna or cable Connect an antenna cable or cable box to watch TV while referring to the following The illustrations may differ from the actual items and a RF cable is optional VHF Antenna UHF Antenna g K Antenna ANTENNA ae Coaxial 75Q i aces l A i VIET I Not Provided 7 a i SN SS gt g ajy SAN SSS SSS S8 Bila Terminal Z CAUTION e Make sure not to bend the copper wire of the RF cable Copper wire iG Q NOTE e Use a signal splitter to use more than 2 TVs e Visit http Igknowledgebase com for more information about the antenna and cable connection Search for antenna e Complete all connection
5. e Generated Sound Cracking noise A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity This noise is common for products where thermal deformation is required Electrical circuit humming panel buzzing A low level noise is generated from a high speed switching circuit which supplies a large amount of current to operate a product It varies depending on the product This generated sound does not affect the performance and reliability of the product e Take care not to touch the ventilation openings When watching the TV for a long period the ventilation openings may become hot This does not affect the performance of the product or cause defects in the product e f the TV feels cold to the touch there may be a small flicker when it is turned on This is normal there is nothing wrong with TV Some minute dot defects may be visible on the screen appearing as tiny red green or blue spots However they have no adverse effect on the TV s performance Avoid touching the LCD screen or holding your finger s against it for long periods of time Doing so may produce some temporary distortion effects on the screen Preventing Image burn or Burn in on your TV screen e Ifa fixed image displays on the TV screen for a long period of time it will be imprinted and become a permanent disfigurement on the screen This is ima
6. e Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Si ES e Only use attachments accessories specified by the manufacturer _ Is e Use only with a cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 3125A e Unplug this apparatus during lightning storms or when unused for long periods of time e Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped e Do not stick metal objects or any other conductive material into the power cord Do not touch the end of the power cord while it is plugged in e Keep the packing anti moisture material or vinyl packing out of the reach of children Anti moisture material is harmful if swallowed If swallowed by mistake force the patient to vomit and visit the nearest hospital Additionally vinyl packing can cause suffocation Keep it out of the reach of children e CAUTION concerning the Power Cord Can differ by country It is recommended
7. 19 5 x 8 1 inch 35 1 x 23 1 x 9 2 inch Wx H x D 738 x 449 x 79 mm 894 x 537 x 79 0 mm Without stand 29 0 x 17 6 x 3 1 inch 35 1 x 21 1 x 3 1 inch With stand 7 0 kg 15 4 Ibs 9 7 kg 21 3 Ibs Weight Without stand 6 4 kg 14 1 Ibs 8 6 kg 18 9 Ibs Current Value Power consumption 1 3A 80W 1 5A 100 W 42LN5300 Wem 42LN5300 UB 968 x 629 x 236 mm With stand Dimensions 38 1 x 24 7 x 9 2 inch WxHxD 968 x 579 x 79 mm Without stand 38 1 x 22 7 x 3 1 inch With stand 10 7 kg 23 5 Ibs Weight Without stand 9 6 kg 21 1 Ibs Current Value Power consumption 1 6A 110 W m 74 A n ac HSITONA3 28 SPECIFICATIONS 42LN5400 47LN5400 MODEI 42LN5400 UA 47LN5400 UA 968 x 629 x 236 mm 1 080 x 694 x 264 mm With stand Dimensions 38 1 x 24 7 x 9 2 inch 42 5 x 27 3 x 10 3 inch WxHxD 968 x 579 x 79 mm 1 080 x 642 x 80 5 mm Without stand 38 1 x 22 7 x 3 1 inch 42 5 x 25 2 x 3 1 inch With stand 10 7 kg 23 5 Ibs 14 5 kg 31 9 Ibs Weight Without stand 9 6 kg 21 1 Ibs 13 1 kg 28 8 Ibs Current Value Power consumption 1 1A 110 W 1 3A 130 W 50LN5400 55LN5400 MODELS 50LN5400 UA 55LN5400 UA 1 136 x 727 x 264 mm 1 250 x 790 x 297 mm With stand Dimensions 44 7 x 28 6 x 10 3 inch 49 2 x 31 1 x 11 6 inch Wx H x D 1 136 x 673 x 82 1 mm 1 250 x 737 x 79 1 mm Without stand 44 7 x 26 4 x 3 2 inch 49 2 x 29 0 x 3 1 inch With st
8. Alternates between the two last channels selected pressing repeatedly VOL Adjusts the volume level FAV Accesses your favorite channel list AUDIO Digital signal Changes the audio language Analog signal Changes the sound setting MUTE J Mutes all sounds NCHYY Scrolls through the saved channels AN PAGE WV Moves to the previous or next screen Smeuinx SLEEP u lt lt gt u gt eoB REMOTE CONTROL 25 oF RATIO INPUT ra fro C CE PICTURE Changes the image mode INFO Shows information on the current program SOUND Changes the sound mode SETTINGS i I H lt J l l l am SETTINGS Al QMENU I Accesses the main menu I Q MENU l I I I l Accesses the quick menu Navigation buttons up down left right Scrolls through menus or options i m i OK Zz EEEE E Selects menus or options and confirms your input 2 l I i Smeuink SLEEP a TA i H BACK ea i Returns to the previous screen I wm EXIT G Co B C l Clears all on screen displays and returns to TV viewing I I eer J p am SIMPLink Accesses the AV devices connected to the TV Opens the SIMPLINK menu SLEEP Sets the length of time until the TV to turns off
9. as gasoline or candles or expose the TV to direct air conditioning a e Do not expose to dripping or splashing and do not place objects filled with liquids such as vases cups etc on or over the apparatus e g on shelves above the unit m Zz A n a5 HSITON3 4 IMPORTANT SAFETY INSTRUCTIONS e Grounding Except for devices which are not grounded Ensure that you connect the earth ground wire to prevent possible electric shock i e a TV with a three prong grounded AC plug must be connected to a three prong grounded AC outlet If grounding methods are not possible have a qualified electrician install a separate circuit breaker Do not try to ground the unit by connecting it to telephone wires lightening rods or gas pipes Power Supply Short circuit Breaker e As long as this unit is connected to the AC wall outlet it is not disconnected from the AC power source even if the unit is turned off e Do not attempt to modify this product in any way without written authorization from LG Electronics Unauthorized modification could void the user s authority to operate this product e Outdoor Antenna Grounding Can differ by country If an outdoor antenna is installed follow the precautions below An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits or where it can come in contact with such power lines or
10. that appliances be placed upon a dedicated circuit that is a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits Check the specification page of this owner s manual to be certain Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock Do not overload wall outlets Overloaded wall outlets loose or damaged wall outlets extension cords frayed power cords or damaged or cracked wire insulation are dangerous Any of these conditions could result in electric shock or fire Periodically examine the cord of your appliance and if its appearance indicates damage or deterioration unplug it discontinue use of the appliance and have the cord replaced with an exact replacement part by an authorized service Protect the power cord from physical or mechanical abuse such as being twisted kinked pinched closed in a door or walked upon Pay particular attention to plugs wall outlets and the point where the cord exits the appliance Do not move the TV with the power cord plugged in Do not use a damaged or loose power cord Be sure do grasp the plug when unplugging the power cord Do not pull on the power cord to unplug the TV e Warning To reduce the risk of fire or electrical shock do not expose this product to rain moisture or other liquids Do not touch the TV with wet hands Do not install this product near flammable objects such
11. MBLING AND PREPARING Setting up the TV You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment center or other furniture Attaching the stand If you are not mounting the TV to a wall use the following instructions to attach the stand N CAUTION e When attaching the stand to the TV set place the screen facing down on a cushioned table or flat surface to protect the screen from scratches e Make sure that the screws are fastened tightly If they are not fastened securely enough the TV may tilt forward after being installed e Do not tighten the screws with too much force otherwise they may be damaged and come loose later Q note e Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse 1 qt 3 EA 3 z T I mi Stand Base N i N e Stand Body F 4 1 l l A 4EA l pront M4x14 J l oe ASSEMBLING AND PREPARING 13 Mounting on a table 1 Lift and tilt the TV into its upright position on a table Leave a 10 cm 4 inches minimum space from the wall for proper ventilation 2 Connect the power cord to a wall outlet ZA CAUTION e Do not place the TV near or on sources of heat as this may result in fire or other damage Securing the TV to a table For 32LN520B 42LN5200 32LN530B 32 39 42LN5300 42 47 50LN5400 Fix the TV to a tab
12. abled phones With some MHL supporting mobile phones you can use the TV remote to control the phone An MHL supported cable is needed to connect the TV and a mobile phone Remove the MHL cable from the TV when the MHL function is disabled your mobile device is fully charged in standby mode HSIIONA3 MHL Cable ia_ 5 Not Provided Mobile phone MAKING CONNECTIONS 19 Component Connection Transmits analog video and audio signals from an external device to the TV Connect the external device and the TV with a component cable as shown in the following illustration Q note e f cables are installed incorrectly it could cause the image to display in black and white or with distorted color e Check to ensure the cables are matched with the corresponding color connection Not Provided Not Provided D m e po T D m Cc m 4 m Z m wi m R VCR DVD Blu Ray HD Cable Box m zZ A n a5 HSITSN3 20 MAKING CONNECTIONS Composite Connection Transmits analog video and audio signals from an external device to the TV Connect the external device and the TV with the composite cable as shown in the following illustration is NOTE e If you have a mono VCR connect the audio cable from the VCR to the AUDIO L MONO jack of the TV MO113A Not Provided c Eum MO113A VCR DVD Blu Ray HD Cab
13. and 15 6 kg 34 3 Ibs 21 2 kg 46 7 Ibs Weight Without stand 14 2 kg 31 3 Ibs 19 1 kg 42 1 Ibs Current Value Power consumption 1 4A 140 W 1 6 A 160 W HDMI DTV supported mode Component port connecting information F Horizontal Vertical Frequency Component ports on the TV VY Ps Pe Resolution Frequency kHz 31 47 59 94 720 x 480p Y Pp Pa 31 50 60 00 44 96 59 94 Video output ports i B Y RY 1280 x 720p on DVD player Y Cb Cr 45 5 00 60 00 Y Pb Pr 33 72 59 94 1920 x 1080i 33 75 60 00 Component supported mode 26 97 23 976 27 00 24 00 Rosalition Horizontal Vertical Frequency 33 71 29 97 Frequency kHz Hz 1920 x 1080p 15 73 59 94 33 75 30 00 720 x 480i 67 432 59 94 15 73 60 00 31 47 59 94 67 50 60 00 720 x 480p 31 50 60 00 44 96 59 94 1280 x 720p 45 00 60 00 33 72 59 94 1920 x 1080i 33 75 60 00 26 97 23 94 27 00 24 00 33 71 29 97 1920 x 1080p 33 75 30 00 67 432 59 94 67 50 60 00 TROUBLESHOOTING 29 TROUBLESHOOTING General Problem Solution Cannot control the TV with the remote control Check the remote control sensor on the product and try again Check if there is any obstacle between the product and the remote control Check if the batteries are still working and properly installed to O to No image display and no sound is produced Check if the p
14. circuits as death or serious injury can occur Be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges Section 810 of the National Electrical Code NEC in the U S A provides information with respect to proper grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding conductors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode Antenna grounding according to the National Electrical Code ANSI NFPA 70 Ground Clamp Wi Antenna Discharge Unit NEC Section 810 20 Grounding Conductor NEC Section 810 21 Electric Service Equipment Ground Clamp Ee Power Service Grounding Electrode System NEC National Electrical Code NEC Art 250 Part H Cleaning When cleaning unplug the power cord and wipe gently with a soft cloth to prevent scratching Do not spray water or other liquids directly on the TV as electric shock may occur Do not clean with chemicals such as alcohol thinners or benzine Moving Make sure the product is turned off unplugged and all cables have been removed It may take 2 or more people to carry larger TVs Do not press or put stress on the front panel of the TV Ventilation Install your TV where there is proper ventilation Do not install in a confined space such as a bookcase Do not cover the
15. els less than 10 mm 0 39 inches thick and 18 mm 0 7 inches width e Use an extension cable that supports USB 2 0 if the USB cable or USB memory stick does not fit into your TV s USB port A 310 mm 0 39 inches B lt 18 mm 0 7 inches ASSEMBLING AND PREPARING Remote Control Batteries AAA See p 24 Stand Body Stand Base See p 12 ee Cable Holder See p 14 Owner s Manual CD manual Stand Screws 3 EA P5 x 25 4 EA M4 x 14 See p 12 Power Cord For 32LN520B 42LN5200 32LN530B 32 39 42LN5300 42 47 50LN5400 Desk Mount Screw See p 13 9 m zZ A n a5 10 ASSEMBLING AND PREPARING Parts and buttons HSITON3 H GO YOO O Speakers Power Indicator Buttons Remote Control Sensor Intelligent Sensor Button Description AIVY AIM Scrolls through the saved channels d ola ofa Adjusts the volume level y OK Selects the highlighted menu option or confirms an input S SETTINGS Accesses the main menus or saves your input and exits the menus IZ INPUT 1 Changes the input source b Turns the power on or off 1 Intelligent sensor Adjusts the image quality and brightness based on the surrounding environment ASSEMBLING AND PREPARING 11 Additional information of the manual Viewing the owner s manual The owner s manual in PDF file format is supplied on t
16. eople are required for installation 4 Flat panel displays can be heavy Consumer Electronics Association www CE org safety LG The extended owner s manuals that contain information on the advanced features of this LG TV are located on the CD ROM provided in an electronic version To read these files you will need to use the personal computer PC equipped with a CD ROM drive The model and serial number of the TV is located on the back and one side of the TV Record it below should you ever need service MODEL SERIAL Life s Good LG Customer Information Center For inquires or comments visit www lg com or call 1 800 243 0000 USA Consumer User 1 888 865 3026 USA Commercial User 1 888 542 2623 CANADA Register your product Online www lg com This product qualifies for ENERGY STAR in the factory default Home Use setting Changing the factory default settings or enabling other features may increase power consumption CLA that could exceed the limits necessary to quality for ENERGY STAR
17. er open source licenses that is contained in this product please visit http opensource lge com In addition to the source code all referred license terms warranty disclaimers and copyright notices are available for download LG Electronics will also provide open source code to you on CD ROM for a charge covering the cost of performing such distribution such as the cost of media shipping and handling upon email request to opensource lge com This offer is valid for three 3 years from the date on which you purchased the product TABLE OF CONTENTS T7 TABLE OF CONTENTS 2 IMPORTANT SAFETY INSTRUCTIONS 24 REMOTE CONTROL 6 LICENSES 26 WATCHING TV 26 Turning the TV on for the first time 6 OPEN SOURCE SOFTWARE NOTICE 27 SPECIFICATIONS 7 TABLE OF CONTENTS 29 TROUBLESHOOTING 8 INSTALLATION PROCEDURE 30 EXTERNAL CONTROL DEVICE SETUP 8 ASSEMBLING AND PREPARING 8 Unpacking 10 Parts and buttons n Additional information of the manual 1 Lifting and moving the TV 12 Setting up the TV 12 Attaching the stand 13 Mounting on a table 14 Tidying cables o 15 Mounting on a wall 9 Wn 16 MAKING CONNECTIONS I 16 Connecting to an antenna or cable 17 Connecting to a HD receiver DVD Player or VCR 17 HDMI Connection 18 Connecting to a mobile phone 19 Component Connection 20 Composite Connection 21 Connecting a PC 21 HDMI Connection 22 Co
18. ge burn or burn in and not covered by the warranty e If the aspect ratio of the TV is set to 4 3 for a long period of time image burn may occur on the letterboxed area of the screen e Avoid displaying a fixed image on the TV screen for a long period of time 2 or more hours for LCD 1 or more hours for the Plasma TV to prevent image burn For USA and Canada FCC NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and the receiver Connect the equipment to an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for
19. he enclosed CD Install the Adobe Acrobat Reader to view the owner s manual on your PC 1 Insert the supplied CD The web page appears automatically 2 Click Owner s Manual on the web page 3 View the owner s manual Q note e f the web page does not appear automatically access My computer and then click LG and index html to view the owner s manual Lifting and moving the TV When moving or lifting the TV read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size N CAUTION e Avoid touching the screen at all times as this may result in damage to the screen e It is recommended to move the TV in the box or packing material that the TV originally came in e Before moving or lifting the TV disconnect the power cord and all cables e When holding the TV the screen should face away from you to avoid damage e Hold the top and bottom of the TV frame firmly Make sure not to hold the transparent part speaker or speaker grill area e When transporting a large TV there should be at least 2 people e When transporting the TV by hand hold the TV as shown in the following illustration e When transporting the TV do not expose the TV to jolts or excessive vibration e When transporting the TV keep the TV upright never turn the TV on its side or tilt towards the left or right m zZ A n a5 HSIION3 12 ASSE
20. he best quality for your home environment select Home Use e Store Demo is suitable for the retail environment e If you select Store Demo any customized settings will switch back to the default settings of Store Demo in 5 minutes SPECIFICATIONS 27 SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions Power requirement AC 100 240 V 50 60 Hz Television System NTSC M ATSC 64 amp 256 QAM Program Coverage VHF 2 13 UHF 14 69 CATV 1 135 DTV 2 69 CADTV 1 135 External Antenna Impedance 75Q Environment Operating Temperature 0 40 C condition T Operating Humidity Less than 80 Storage Temperature 20 60 C Storage Humidity Less than 85 32LN520B 42LN5200 MODELS 32LN520B UA 42LN5200 UA 738 x 497 x 207 mm 968 x 629 x 236 mm With stand Dimensions 29 0 x 19 5 x 8 1 inch 38 1 x 24 7 x 9 2 inch Wx H x D 738 x 449 x 79 mm 968 x 579 x 79 mm Without stand 29 0 x 17 6 x 3 1 inch 38 1 x 22 7 x 3 1 inch With stand 7 0 kg 15 4 Ibs 10 7 kg 23 5 Ibs Weight Without stand 6 4 kg 14 1 Ibs 9 6 kg 21 1 Ibs Current Value Power consumption 1 3A 80W 1 6A 110W 32LN530B 32LN530B UA MODELS 39LN5300 32LN5300 39LN5300 UB 32LN5300 UB 738 x 497 x 207 mm 894 x 587 x 236 mm With stand Dimensions 29 0 x
21. help This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation of the device Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment NOTE TO CABLE TV INSTALLER This reminder is provided to call the CATV system installer s attention to Article 820 40 of the National Electric Code U S A The code provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of the cable entry as practical m 74 A n ac HSITON3 6 LICENSES OPEN SOURCE SOFTWARE NOTICE LICENSES Supported licenses may differ by model For more information about licenses visit www lg com DE DOLBY Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories DIGITAL HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC HIGH DEFINITION MULTIMEDIA INTERFACE OPEN SOURCE SOFTWARE NOTICE To obtain the source code under GPL LGPL MPL and oth
22. ibility of accident or death Z CAUTION If you ignore the caution message you may be slightly injured or the product may be damaged Q note The note helps you understand and use the product safely Please read the note carefully before using the product WARNING This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm Wash hands after handling Read these instructions Keep these instructions Heed all warnings Follow all instructions SF Do not use this apparatus near water K Clean only with a dry cloth k Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Can differ by country Do not press strongly upon the panel with a hand or a sharp object such as a nail pencil or pen or make a scratch on it IMPORTANT SAFETY INSTRUCTIONS 3
23. ith your product m 74 A n a5 HSIISN3 30 TROUBLESHOOTING EXTERNAL CONTROL DEVICE SETUP Video Problem Solution An image displays in black and white or the color quality is poor Adjust the color setting in the menu option Keep a sufficient distance between this product and other electronic products Scroll to other channels There may a problem with the broadcast Horizontal or vertical bars appears or images blur Check if there are local interferences such as an electrical appliance or power tool Lines or streaks appear on images Check the antenna or aim the antenna to the proper direction Afterimages ghosts appear when the product turns off Pixels may have been damaged from a fixed image displayed for a long time image burn Use a screen saver to prevent the pixel damage on the screen The power is on but the screen appears extremely dark Adjust the brightness and contrast in the menu option No Signal appears on the screen Check if the signal cable is connected between the TV and products properly Check the selected input source by pressing INPUT Black spots appear on the screen Several pixels in red green white or black may appear on the screen that can attribute to the characteristics of the panel This is normal The display offset is wrong Thin lines appear in the background of the screen Adjust the position setting in
24. le Box MAKING CONNECTIONS 21 Connecting a PC Q note X It is recommended to use an HDMI connection for the best image quality Depending on the graphics card DOS mode video may not work if a HDMI to DVI Cable is in use In PC mode there may be noise associated with the resolution vertical pattern contrast or brightness If noise is present change the PC output to another resolution change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear The synchronization input form for Horizontal and Vertical frequencies is separate Depending on the graphics card some resolution settings may not allow the image to be positioned on the screen properly If you use DVI to HDMI cable for PC you have to use external speaker for PC audio sound HDMI Connection gt aa mwa Se Not Provided m zZ A 5 n a5 HSIION3 22 MAKING CONNECTIONS Connecting to an Audio System You can use an optional external audio system instead of the built in speaker Digital Optical Audio Connection Transmits a digital audio signal from the TV to an external device Connect the external device and the TV with the optical audio cable as shown in the following illustration Q note e Do not look into the optical output port Looking at the laser beam may damage your vision e Audio with ACP Audio Copy Protection function may block digital audio o
25. le to prevent from tilting forward damage and potential injury Mount the TV on a table and then insert and tighten the supplied screw on the rear of the stand A WARNING e To prevent TV from falling over the TV should be securely attached to the floor wall per installation instructions Tipping shaking or rocking the TV may cause injury Using the Kensington security system optional The Kensington security system connector is located at the rear of the TV For more information of installation and using refer to the manual provided with the Kensington security system or visit http www kensington com Connect the Kensington security system cable between the TV and a table Q note e The Kensington security system is optional You can obtain additional accessories from your local dealer m Zz A n a5 HSITON3 14 ASSEMBLING AND PREPARING Securing the TV to a wall optional Tidying cables Depending on model 1 Gather and bind the cables with the cable holder 1 Insert and tighten the eye bolts or TV brackets and N CAUTION bolts on the back of the TV e Do not move the TV by holding the cable holder as the cable holders may break and injuries and damage to the TV may occur If there are bolts inserted at the eye bolts position remove the bolts first 2 Mount the wall brackets with the bolts to the wall Match the location of the wa
26. ll bracket and the eye bolts on the rear of the TV 3 Connect the eye bolts and wall brackets tightly with a sturdy rope Make sure to keep the rope horizontal with the flat surface Z CAUTION e Make sure that children do not climb on or hang on the TV Q note g e Use a platform or cabinet that is strong and large enough to support the TV securely e Brackets bolts and ropes are optional You can obtain additional accessories from your local dealer ASSEMBLING AND PREPARING 15 Mounting on a wall An optional wall mount can be used with your LG Television Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model Carefully attach the wall mount bracket at the rear of the TV Install the wall mount bracket on a solid wall perpendicular to the floor If you are attaching the TV to other building materials please contact qualified personnel to install the wall mount Detailed instructions will be included with the wall mount We recommend hat you use an LG brand wall mount ake sure to use screws and wall mounts that meet the VESA standard Standard dimensions for the wall mount kits are described in the following table Model 47LN5400 50LN5400 55LN5400 VESA A x B 400 x 400 aan B ll ql Standard screw M6 Number of screws 4 Wall mount bracket LSW430B optional z
27. nnecting to an Audio System 22 Digital Optical Audio Connection 23 Connecting a USB Device Q note e Image shown may differ from your TV e Your TV s OSD On Screen Display may differ slightly from that shown in this manual The available menus and options may differ from the input source or product model that you are using New features may be added to this TV in the future HSITION3 8 INSTALLATION PROCEDURE ASSEMBLING AND PREPARING INSTALLATION PROCEDURE 1 Open the package and make sure all the accessories are included 2 Attach the stand to the TV set 3 Connect an external device to the TV set ASSEMBLING AND PREPARING Unpacking Check your product box for the following items If there are any missing accessories contact the local dealer where you purchased your product The illustrations in this manual may differ from the actual product and item N CAUTION e Do not use any unapproved items to ensure the safety and product life span e Any damages or injuries by using unapproved items are not covered by the warranty e Some models appear to have a thin film on the screen It is actually part of the screen do not remove it Q note The items supplied with your product may vary depending on the model e Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions e For an optimal connection HDMI cables and USB devices should have bez
28. product with cloth or other materials while plugged Do not install in excessively dusty places If you smell smoke or other odors coming from the TV unplug the power cord and contact an authorized service center Keep the product away from direct sunlight Never touch this apparatus or antenna during a thunder or lightning storm When mounting a TV on the wall make sure not to install the TV by hanging the power and signal cables on the back of the TV Do not allow an impact shock or any objects to fall into the product and do not drop anything onto the screen Disconnecting the Main Power The power outlet used with this device must remain easily accessible Store the accessories battery etc in a safe location out of the reach of children This apparatus use batteries In your community there might be regulations that require you to dispose of these batteries properly due to environmental considerations Please contact your local authorities for disposal or recycling information Do not dispose of batteries in a fire Do not short circuit disassemble or allow the batteries to overheat IMPORTANT SAFETY INSTRUCTIONS e Dot Defect The Plasma or LCD panel is a high technology product with resolution of two million to six million pixels In a very few cases you could see fine dots on the screen while you re viewing the TV Those dots are deactivated pixels and do not affect the performance and reliability of the TV
29. roduct is turned on Check if the power cord is connected to a wall outlet Check if there is a problem in the wall outlet by connecting other products Image appears slowly when the TV turns on The image is muted during the product startup process This is normal If the image does not appear in a few minutes unplug the TV for 30 seconds and try again If the image still does not appear contact the authorized service center in your local area Cannot connect external devices Refer to the Connection Overview and connect an external device The TV turns off suddenly e Check the power control settings The power supply may be interrupted e Check if the Auto sleep feature is activated in the Time settings Refer to the Sleep Timer e If there is no signal while the TV is on the TV will turn off automatically after 15 minutes of inactivity Depending on model Audio Problem Solution No sound is produced while images are displaying Press VOL or button Check if the sound is muted by pressing MUTE Scroll to other channels There may a problem with the broadcast Check if the TV Speaker feature is activated in the menu option No output from one of the speakers Adjust Balance in the menu option Unusual sound from inside the TV is produced A change in ambient humidity or temperature may result in an unusual noise when the product turns on or off There is no problem w
30. s between devices and then connect the power cord to the power outlet to prevent damage to your TV e DTV Audio Supported Codec MPEG Dolby Digital MAKING CONNECTIONS 17 Connecting to a HD receiver DVD Player or VCR Connect a HD receiver DVD Player or VCR to the TV and select an appropriate input mode HDMI Connection HDMI is the best way to connect a device Transmits digital video and audio signals from an external device to the TV Connect the external device and the TV with the HDMI cable as shown in the following illustration Q note e Use the latest High Speed HDMI Cable that supports CEC Customer Electronics Control function e High Speed HDMI Cables are tested to carry an HD signal up to 1080p and higher e HDMI Audio Supported Format Dolby Digital PCM Up to 192 KHz 32k 44 1k 48k 96k 192k gt DTS is not supported Choose any HDMI input port to connect It does not matter which port you use E HDMI Not Provided J A x eee gt m DVD Blu Ray HD Cable Box HD STB m zZ A n a5 18 MAKING CONNECTIONS Connecting to a mobile phone Mobile High definition Link MHL is an interface for transmitting digital audio visual signals from mobile phones to television sets Q note Connect the mobile phone to the HDMI IN 2 MHL port to view the phone screen on the TV This only works with an MHL en
31. the Picture menu Check if the video card resolution and frequency are supported by the product If the frequency is out of range set to the recommended resolution using the display settings on the external device Check the video cable connections The reception on some channels is poor Scroll to other channels There may a problem with the broadcast The station signal may be weak Aim the antenna to the proper direction Check if there is local interferences such as an electrical appliance or power tool EXTERNAL CONTROL DEVICE SETUP To obtain the external control device setup information please visit www lg com CHILD SAFETY It Makes A Difference How and Where You Use Your Flat Panel Display Congratulations on your purchase As you enjoy your new product please keep these safety tips in mind THE ISSUE e The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases However flat panel displays are not always supported on the proper stands or installed according to the manufacturer s recommendations e Flat panel displays that are inappropriately situated on dressers bookcases shelves desks speakers chests or carts may fall over and cause injury THIS MANUFACURER CARES e The consumer electronics industry is committed to making home entertainment enjoyable and safe TUNE INTO SAFETY e One size does NOT fit all Follow the manufac
32. turer s recommendations for the safe installation and use of your flat panel display e Carefully read and understand all enclosed instructions for proper use of this product e Don t allow children to climb on or play with furniture and television sets e Don t allow place flat panel displays on furniture that can easily be used as steps such as a chest of drawers e Remember that children can become excited while watching a program especially on a larger than life flat panel display Care should be taken to place or install the display where it cannot be pushed pulled over or knocked down e Care should be taken to route all cords and cables connected to the flat panel display so that they cannot be pulled or grabbed by curious children WALL MOUNTING IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY ALWAYS e Use a mount that has been recommended by the display manufacturer and or listed by an independent laboratory such as UL CSA ETL e Follow all instructions supplied by the display and wall mount manufacturers e f you have any doubts about your ability to safely install your flat panel display contact your retailer about professional installation e Make sure that the wall where you are mounting the display is appropriate Some wall mounts are not designed to be mounted to walls with steel studs or old cinder block construction If you are unsure contact a professional installer NE e A minimum of two p
33. utput P pHMoId 4ON OPTICAL AUDIO IN gg ef Digital Audio System MAKING CONNECTIONS 23 Connecting a USB Device Connect a USB storage device such as a USB flash memory external hard drive or a USB memory card reader to the TV USB LU ma i o A J ESR Not Provided m 74 A n a5 HSITON3 24 REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control Please read this manual carefully and use the TV correctly To install batteries open the battery cover replace batteries 1 5 V AAA matching the and ends to the label inside the compartment and close the battery cover To remove the batteries perform the installation actions in reverse ZA CAUTION E Do not mix old and new batteries as this may damage the remote control This remote uses infrared light When in use it should be pointed in the direction of the TV s remote sensor 4 POWER Turns the TV on or off TV Returns to the last TV channel CAPTION Activates or deactivate the subtitles AV MODE Selects an AV mode RATIO Resizes an image INPUT Changes the input source Turns the TV on if it is off Number button Enters numbers Dash Inserts a dash between numbers such as 2 1 and 2 2 LIST wane Accesses the saved channel list FLASHBK
Download Pdf Manuals
Related Search