Home

Gefen GTV-HDMI-2-COMPSVIDSN video converter

image

Contents

1. with RCA connectors Connect the power supply to the scaler and to an available electrical outlet Power on all connected components Use the NTSC PAL switch on the scaler to select the correct output format for your TV Select Underscan or Overscan using the slide switch on the scaler to compensate for scanning characteristics of your analog TV that could result in over cropping of the image or visible black borders NOTE HDCP encrypted HDMI sources are not supported by this device If HDCP content is used then the outgoing video signal will result in a black screen INTRODUCTION Important Operating Notes READ THESE NOTES BEFORE INSTALLING OR OPERATING THE HDMI TO COMPOSITE S VIDEO SCALER The HDMI To Composite S Video Scaler converts HDTV input resolutions of 480p 50 60Hz 576p 50 60Hz 480i 50 60Hz 576i 50 60Hz 720p 50 60Hz 1080i and 1080p at 50 60HZ to either NTSC 480i or PAL 576i Supported PC input resolutions include 640x480 60Hz 800x600 60Hz 1024x768 60Hz 1280x1024 60Hz 1600x1200 60Hz and 1920x1200 60Hz Both the digital and analog audio outputs are active at all times when using 2 channel LPCM The HDMI To Composite S Video Scaler will not down mix multi channel digital audio formats to 2 channel analog stereo See page 9 for more information This device supports both NTSC and PAL video standards This device maintains the aspect ratio of the original signal Please be sure to set the proper output fo
2. workmanship If equipment fails because of such defects and Gefen is notified within two 2 years from the date of shipment Gefen will at its option repair or replace the equipment provided that the equipment has not been subjected to mechanical electrical or other abuse or modifications Equipment that fails under conditions other than those covered will be repaired at the current price of parts and labor in effect at the time of repair Such repairs are warranted for ninety 90 days from the day of reshipment to the Buyer This warranty is in lieu of all other warranties expressed or implied including without limitation any implied warranty or merchantability or fitness for any particular purpose all of which are expressly disclaimed 1 Proof of sale may be required in order to claim warranty 2 Customers outside the US are responsible for shipping charges to and from Gefen 3 Copper cables are limited to a 30 day warranty and cables must be in their original condition The information in this manual has been carefully checked and is believed to be accurate However Gefen assumes no responsibility for any inaccuracies that may be contained in this manual In no event will Gefen be liable for direct indirect special incidental or consequential damages resulting from any defect or omission in this manual even if advised of the possibility of such damages The technical information contained herein regarding the features and s
3. ON Congratulations on your purchase of the HDMI to Composite S Video Scaler Your complete satisfaction is very important to us Gefen Gefen delivers innovative progressive computer and electronics add on solutions that harness integration extension distribution and conversion technologies Gefen s reliable plug and play products supplement cross platform computer systems professional audio video environments and HDTV systems of all sizes with hard working solutions that are easy to implement and simple to operate The GefenTV HDMI to Composite S Video Scaler Convert any Hi Def source to standard definition NTSC PAL format with scaling The HDMI to analog video scaler accommodates resolutions up to 1080p Full HD video and supports scaled outputs in Composite and S Video while maintaining the original aspect ratio for optimal viewing The coax S PDIF digital audio and left right analog audio outputs allow the audio extracted from the HDMI signal to be sent to any A V Receiver or audio amplifier Underscan Overscan and NTSC PAL switches help assure compatibility with a variety of analog televisions This scaler also features a USB port for firmware upgrades How lt Works Using the included HDMI cable connect the Hi Def source to the HDMI input Use a composite or S video cable to connect the scaler to the analog monitor Connect the scaler to an A V Receiver or amplifier using an S PDIF cable or an analog audio stereo patch cord
4. R connectors on the display or A V receiver Connect the included 5V DC power supply to the power receptacle on the scaler and connect the power cord to an available electrical outlet Wiring Diagram for the HDMI to Composite S Video Scaler HDMI CABLE efen GY S VIDEO CABLE 177777 COMPOSITE VIDEO CABLE COAX AUDIO CABLE Hi Def Source L R RCA AUDIO CABLE Display Audio Receiver GTV HDMI 2 COMPSVIDSN OPERATING THE HDMI TO COMPOSITE S VIDEO SCALER Using Overscan and Underscan Once the HDMI to Composite S Video Scaler is connected and powered the content from the Hi Def source should be displayed Over Scan If the video signal displays a black border around the edges of the picture then set the Under Scan Over Scan switch to the Over Scan position to correct the image Example of an image with underscan Corrected image using overscan OPERATING THE HDMI TO COMPOSITE S VIDEO SCALER Under Scan If the video signal extends beyond the edge of the display shown in red then set the Under Scan Over Scan switch to the Under Scan position to correct the image Over scanned image exaggerated Corrected image using underscan OPERATING THE HDMI TO COMPOSITE S VIDEO SCALER Audio Output and Formats Both the digital Coax Out and analog L R audio outputs are active at all times Only 2 channel LPCM is supported on the output See
5. Seien HDMI to omposite S Video Scaler EXT HDMI 2 COMPSVIDSN User Manual w gefen com ASKING FOR ASSISTANCE Technical Support Telephone 818 772 9100 800 545 6900 Fax 818 772 9120 Technical Support Hours 8 00 AM to 5 00 PM Monday through Friday Pacific Time Write To Gefen LLC c o Customer Service 20600 Nordhoff St Chatsworth CA 91311 www gefen com support gefen com Notice Gefen LLC reserves the right to make changes in the hardware packaging and any accompanying documentation without prior written notice HDMI to Composite S Video Scaler is a trademark of Gefen LLC All trademarks are the property of their respective companies 2013 Gefen LLC All Rights Reserved All trademarks are the property of their respective companies Rev 1 CONTENTS INTRODUCTION een este 1 important Operating 5 REPASO SERERE i i 2 14 51 10 cines 3 Package Melide ee een 3 SA nee nee A 4 A liano 5 CONNECTING THE HDMI TO COMPOSITE S VIDEO 6 og lee 6 o e 6 OPERATING THE HDMI TO COMPOSITE S VIDEO 7 Using Overscan and eben o 7 o A 8 ana 9 APFE NDD Gba a 10 Firmware Update Procedure ui 10 o ei 11 WARRANTY 2 2 2 een een 12 INTRODUCTI
6. pecifications is subject to change without notice For the latest warranty coverage information refer to the Warranty and Return Policy under the Support section of the Gefen Web site at www gefen com PRODUCT REGISTRATION Please register your product online by visiting the Register Product page under the Support section of the Gefen Web site 12 N x D I xMA HDMI 2 COMPSV 1 800 545 6900 Qu This product uses UL or CE listed power supplies 20600 Nordhoff St Chatsworth CA 91311 818 772 9100 www gefen com support gefen com Rev 1 fax 818 772 9120
7. rmat for your television NTSC 60Hz is commonly used in the United States and Japan while PAL 50Hz is commonly used in European countries Using the improper format will result in a unrecognizable picture and may damage your TV set The HDMI To Composite S Video Scaler is HDMI 1 2 Compliant HDCP encrypted HDMI sources are not supported by this device If HDCP content is used then the outgoing video signal will result in a black screen INTRODUCTION Features HDMI to Composite S Video conversion plus scaling HDMI pass through Supports 480i to 1080p HDMI input resolutions at 50 60 Hz Outputs 480i 576i signal for Composite S Video Display devices Supports both NTSC and PAL formats Package Includes 1 HDMI To Composite S Video Scaler 1 6 ft HDMI Cable M M 1 5V DC Power Supply 1 Quick Start Guide Front Top INTRODUCTION Panel Layout INTRODUCTION Panel Descriptions 1 Connect two RCA type cables from these outputs to the display audio amplifier or receiver Only 2 channel LPCM from the HDMI input can be passed to these outputs Multi channel bit stream such as Dolby Digital will not be passed to this output 2 Composite Connect an RCA type cable from this output to the Composite input on the display or A V receiver 3 S Video Connect an S Video cable between this output and the S Video input on the display or A V receiver 4 Coax Out Connect an RCA type cable f
8. rom this output to the S PDIF connector on a receiver or audio amplifier 5 PAL NTSC Switches between NTSC 60Hz and PAL 50Hz output Make sure that you use the proper output for the television Using the wrong format will result in a unrecognizable picture and may damage your television 6 Under Scan Over Scan Most analog television sets were designed to accept an over scanned signal If the resulting video signal displays a black border around the edges then set this switch to Over Scan If the resulting video signal is stretched beyond the edge of the display then set this switch to Under Scan 7 Connect an HDMI cable from the Hi Def source to this connector 8 USB Used to upgrade the firmware See page 10 for information on upgrading the firmware 9 5VDC Connect the included 5V DC power supply to this receptacle 10 Power This LED will glow bright blue once the included power supply is connected between the scaler and an available electrical outlet INTRODUCTION Connections Connect the included HDMI cable between the Hi Def source and the HDMI In connector on the scaler Connect an S Video cable from the scaler to the display or an A V receiver Alternately or additionally connect a Composite cable RCA type between the scaler and the Composite input on the display or A V receiver Connect two RCA type cables usually part of the Composite cable between the L and R connectors on the scaler and the L and
9. the table below Dolby Digital YES NO DTS Multichannel NO NO LPCM 2 Channel YES YES LPCM APPENDIX Firmware Update Procedure Download the firmware update from the Support section of the Gefen Web site Power OFF the HDMI to Composite S Video Scaler It is unnecessary to disconnect any cables from the HDMI to Composite S Video Scaler during the update process IMPORTANT The HDMI to Composite S Video Scaler must be POWERED OFF before connecting the USB cable to the computer Connect a USB cable between the computer and the HDMI to Composite S Video Scaler Power ON the HDMI to Composite S Video Scaler by connecting the power Once the computer is able to connect to the HDMI to Composite S Video Scaler a Removeable disk icon will be displayed Extract the firmware file from the ZIP file and drag the bin file to the Removable Disk Disconnect the USB cable from the computer The firmware update process is complete 10 APPENDIX Specifications Horizontal Frequency Range aiii 31 70 kHz Vertical Frequency Range arar dais 50 60 kHz a e o 1 HDMI Type A 19 pin female Video A A 1 Composite RCA 1 S Video A A AA 2 RCA type 1 S PDIF Power CONSUMPUON runter heran caida 7 5 Watts max POWER SPD I ee ern 5V 2 6ADC A Oe ir E ee 4 lbs 1 8 kg 11 WARRANTY Gefen warrants the equipment it manufactures to be free from defects in material and

Download Pdf Manuals

image

Related Search

Related Contents

  Radio Shack 12-756 User's Manual  AVerMedia F200  Philips HQT764/00  感知器の点検方法 編 - 日本火災報知機工業会  Bosch CIZ10090  IM-350377 6A Revised-150720 - Migros  PDF 585 ko  Indexed Search Engine  Manual Del Propietario  

Copyright © All rights reserved.
DMCA: DMCA_mwitty#outlook.com.