Panasonic DS-52 mounting kit
Contents
1. INSTALLATION INSTRUCTIONS Product Date Form Flat Floor Base 8 29 97 INST 11 DS 52 1 Place the base on the floor so the post is in the desired location It may be necessary to mount the heads or rack on it first in order to determine the best location Mark the mounting hole locations and note whether it will be necessary to shim any corner with washers to compensate for floor irregularities 2 Drill 17 32 holes in the floor at each mounting hole location using care not to damage any equipment that may be under the floor Most bases have holes for 3 8 bolts but holes for 1 2 bolts are furnished in the taller bases 3 Place the bolts in the holes add nuts and washers and tighten If the floor is less than 1 4 thick we recommend using fender washers on the bottom side Do not use lag screws or sheet metal screws as these can pull out of the floor 4 The height is adjustable by loosening the bolt at the top of the post one turn If necessary tap lightly on the top of the bolt to release the top plate Adjust the height and direction of the top plate and retighten the bolt Loosen and tap bolt to adjust top plate Base sits flat on the floor in the desired location If you need assistance or have questions call Gamber Johnson at 1 800 456 6868
Download Pdf Manuals
Related Search