Philips Cinema 21:9 LED TV 58PFL9577
Contents
1. Reset Cancel Step 1 Search and store new TV channels ReinstallTV a 1 Press 2 Select Setup gt Channel settings gt Channel installation gt Analogue Manual antenna installation gt Find channel then pressOK e If you know the three digit frequency of the channel enter it Press Select Setup gt TV settings gt Factory settings then press OK 3 Enter the PIN code with a default value of 8888 select RESET press OK to start resetting previous settings e To search select Search then 4 30 Install channels press OK 3 When the channel is found select Done then press OK e To store the channel as a new number select Store as new channel then pressOK e To store the channel as the previously selected channel select Store current channel then press OK The first time you set up your TV you are prompted to select a menu language and to install TV Afterwards you can re install and fine tune channels 4 31 Automatically install channels 1 Press 2 Select Setup gt Search for channel then pressOK EN 17 Step 2 Fine tune analogue channels 043 25MHz 1 Press amp Select Setup gt Channel settings gt Channel installation gt Analogue manual install gt Fine tune then press OK 3 Press Av to fine tune the channel When fine tune is complete Select Done then press OK 4 33 Rename channels You can r2. 7 7 View photos 1 7 8 View a slide show of your photos 24 In the USB browser select Picture then press OK Select a photo or a photo album then press OK to view the photo enlarged to fill the TV screen e To view the next or previous photo press gt lt 1 When a full screen image of a photo is displayed pressOK A slide show begins from the selected photo 2 Press the following buttons to control play OK to play e Hl to pause e I lt orb to play the previous or next photo 7 9 Change slide show settings 1 1 2 Wait for five seconds then disconnect While you view a slide show press OPTIONS The slide show options menu is displayed Select one of the following then press OK Start Stop slideshow Start or stop slideshow Slideshow transitions Set the transition from one picture to the next e Repeat Play once Play once or repeatedly Rotate image Rotate photo Show info Display the picture name date size and next picture in the slide show Note Rotate image and Show info appear only when the slideshow is paused 7 10 Disconnect a USB storage device i Caution e e Follow this procedure to avoid damage to your USB storage device Press D to exit the USB browser the USB storage device 8 Troubleshooting This section describes commonly encountered issues and accompanying solutions
3. e Check that the volume is not set to 0 e Check that the sound is not muted There is a picture but the sound quality is poor e Check that the sound settings are correctly set There is a picture but sound comes from one speaker only 8 The DTH display not come on TV screen 7 DTH connection issues Check if the DTH cable is inserted properly Check if the Smart Card is inserted in given direction in CI Slot Check you recharge validity e Please follow Onscreen instructions for DTH related connection issues Note e Verify that sound balance is set to the centre 8 8 Internet issues Internet is not working properly 8 5 HDMI connection issues There are problems with HDMI devices e Note that HDCP High bandwidth Digital Content Protection support can delay the time taken for a TV to display content from a HDMI device e If the TV does not recognise the HDMI device and no picture is displayed try switching the source from one device to another and back again e If there are intermittent sound disruptions check that output settings from the HDMI device are correct e Ifyou use an HDMI to DVI adapter or HDMI to DVI cable check that an additional audio cable is connected tav IN 8 6 Computer connection issues The computer display on the TV is not stable e Check that your PC uses the supported resolution and refresh rate e Select the Auto Adjust function 1 Press a
4. 9 STANDBY 62 POWER r RD AVOUT YPbPr AV2IN AV1IN Ethernet o VGA AUDIO IN 10 AC POWER IN 11 IF IN 12 RF IN 13 VGA IN 14 HDMI 1 15 HDMI 2 16 USB Note IFIN RFIN VGAIN HDMI1 HDMI2 USB 17 SMART CARD IN 18 VGA AUDIO IN 19 AV OUT 20 YPbPr 21 AV2 IN 22 AV1 IN 23 ETHERNET Above sketch and connectivity are just for representation actual product may look different EN 3 2 Name and Function of Control on Remote EN Standby On e Switch the TV ON or OFF The TV is not powered off completely unless it is physically unplugged 2 FAVORITE e Access the favorite channels in DTH menu 3 x ExT e Exit from any ATV or DTH menu in one click 4 tt apyust e Access the menu to adjust settings CH CH e Switch channels S e Return to the previous menu Kk e Mute or restore audio e Adjust volume 0 9 Numeric buttons e Select channels ACTIVE e View the Active Services in DTH OPTIONS e Access options for the current activity or selection d2h Menu e Access the DTH menu SWAP e Swap between two channels OK e Confirm an entry or selection In USB it functions as Play Pause 000000009 gt A lt v Navigation buttons e Navigate through menus and select items gt In USB it functi
5. 8 1 General TV issues The TV does not switch on Disconnect the power cable from the power outlet Wait for one minute then reconnect it e Check that the power cable is securely connected The remote control is not working properly e Check that the remote control batteries are correctly inserted according to the orientation e Replace the remote control batteries if they are flat or weak e Clean the remote control and TV sensor lens The standby light on the TV blinks red Disconnect the power cable from the power outlet Wait until the TV cools down before reconnecting the power cable If the blinking reoccurs contact Philips Consumer Care You forgot the code to unlock the TV lock feature e Enter 3693 When turning the TV on off to standby you hear a creaking sound from the TV chassis e No action is required The creaking sound is normal expansion and contraction of the TV as it cools down and warms up This does not impact performance Cannot remove e sticker banner displayed on the TV To remove the logos and images set the location of your TV to home 1 Press 2 Select Setup gt TV settings gt Preferences gt Location 3 Select Home and pressOK 8 2 TV channel issues Previously installed channels do not appear in the channel list e Check that the correct channel list is selected 8 3 Picture issues The TV is on but there is no picture e Check that t
6. This Warranty Card is not completed and signed immediately on delivery of the set by the Philips Dealer Fading effects and or Ghosts Multiple Image in picture if any arising due to location signal reception Defects due to causes beyond control like lightning abnormal voltage Acts of God or while in transit to purchaser s residence Refer Consumer Guidelines for further details PHILIPS EN 31 PHILIPS Be responsible Respect copyrights Specifications are subject to change without notice PHILIPS and the PHILIPS Shield Emblem are registered trademarks of Koninklijke Philips Electronics N V and are used under license from Koninklijke Philips Electronics N V www philips com
7. e Never place the TV or any objects on the on screen menus black bars and time power cord displays If you must use stationary To easily disconnect the TV power cord images reduce screen contrast and from the power outlet ensure that you brightness to avoid screen damage have full access to the power cord at all Unplug the TV before cleaning times e Clean the TV and frame with a soft When you disconnect the power cord damp cloth Never use substances such as always pull the plug never the cable alcohol chemicals or household cleaners on the TV Disconnect the TV from the power outlet and antenna before lightning storms During lightning storms never touch any part of the TV power cord or antenna cable Risk of hearing damage Avoid using earphones or headphones at high volumes or for prolonged periods of ea Note e Risk of damage to the TV screen Never touch push rub or strike the screen with any object To avoid deformations and colour fading wipe off water drops as soon as possible time 4 Pictures and drawings shown in this user Low temperatures guide book are just for representation If the TV is transported in temperatures Actual Product may look different than below 5 C or 41 F unpack the TV and representation wait until the TV temperature matches amp Subscription of DTH service is subject to room temperature before connecting the separate contract with the service provider TV to the p
8. or a compatible TV mount Warning Follow all instructions provided with the TV mount PE Electronics Ltd bears no responsibility for improper TV mounting that results in accident injury or damage TV screen size inches Required Required mounting pitch mm 400 x 400 4 x M5x12 9 7 Product specification Design and specifications are subject to change without notice 58PFL9577 V7 With TV stand Dimension WxDxkH 1442 x 295 x 729 mm Weight 34 7 kg Without TV stand Dimension WxDxkh 1442 x 45 x 667 mm Weight 30 kg EN 29 Consumer Guidelines 1 Kindly ensure that the dealer fills up Warranty card correctly 2 To avail the Warranty please register your product with the Philips e Log on to www Philips com OR e Contact Philips Consumer Care Centre 3 In the unlikely event of a defect developing in the TV set contact the Philips Customer Care Centre for obtaining warranty service and inform of the defect observed in the set the type no and serial no of the set 4 On your lodging a complaint a trained technician will call on you promptly In the event of the technician deciding that set requires attention at the service station the technician would arrange to get the set picked up to be delivered to service station for further attention Homecalls by the technician would however be restricted within the municipal limits of the city town in which the set has been register
9. 9 4 3 Remove devices from the 45 Use settings assistant home menu l Use the settings assistant to guide you If a device is no longer connected to the TV through the picture and sound settings remove it from the home menu 1 Press f 2 Select Setup gt Quick picture and 1 Press sound settings then pressOK 2 Select a device to remove 3 Select Continue then pressOK 3 Press OPTIONS The Settings assistant menu 4 Select Remove device then presOK appears 5 Select Remove then pressOK 4 Follow the onscreen instructions to The selected device is removed from choose your preferred picture settings the home menu 4 4 Change picture and sound 4 6 Manually adjust picture settings settings Change picture and sound settings to suit your preferences You can apply pre defined settings Picture Picture Perea or change settings manually Sound Reset Cinema EasyLink Contrast Sport 3D Brightness Vivid Preferences Colour Bright Factory Settings Sharpness Reinstall TV Hue Noise Reduction nd Search for Channels Connect to Sound Settings Network l l mm 1 Press TV Settings Channel Settings Network Settings Software Settings 2 Select Setup gt TV settings gt Picture then pressOK 3 Select one of the following settings then press gt A lt v to navigate and press OK Note to adjust Smart picture Access predefined smart e While you watch TV or externa
10. mute on Select the MENU functiorby pressing the OPTION button on your remote controller Note e Status is not available in d2h source Note remote to release the set from mutescreen 4 14 Create and use lists of favorite channels You can create a list of your preferred TV channels so that you can find those channels easily Mark as Favorite Select list Rename Channel Reorder Hide Channel Show Hidden Ghannels 13 View only the list of favorite channels 1 While you watch TV press OK The channel matrix menu is displayed Press OPTIONS Select Select list gt Favorite then press OK Only channels in the favorite list appear in the channel grid Note e The favorite channel grid is empty until you add channels into the favorite list 4 15Hide Unhide channels 1 While you watch TV press OK The channel matrix menu is displayed 2 Press OPTIONS 3 Select Hide channels or Unhide channels Select the channels which want to Hide or Unhide Note After doing hide channels H symbol will appear on Channel Matrix EN 13 4 15 View all channels You can exit the favorite list and view all installed channels 1 While you watch TV press OK The channel matrix menu is displayed Press OPTIONS Select Select list gt All then press OK All channels are displayed in the channel grid Note e All favorit
11. Change Code oO Oo a o m m m m 4 21 Lock or unlock one or more Channels Press ft gt Setup gt Channel settings gt Child lock gt Channel lock A list of channels is displayed Select the channel that you want to lock or unlock then press OK The first time you lock or unlock a channel you are prompted to enter your PIN code Enter your code and pressOK If the channel is locked a lock icon is displayed in channel grid Repeat the process to lock or unlock more channels 4 22 Lock or unlock one or more Sources Press f gt Setup gt Channel settings gt Child lock gt Video lock A list of sources are displayed Select the source that you want to lock or unlock then press OK The first time you lock or unlock a source you are prompted to enter your PIN code Enter your code and press OK Ifthe source is locked a lock icon is displayed in source list Repeat the process to lock or unlock more sources 4 23 Lock or unlock front panel 1 Press ff gt Setup gt Channel settings gt Child lock gt Front Panel lock 2 Select ON and pressOK The front panel is locked now Only remote can be used for operation Note e Set will get released from standby using touchpad even if front panel lock is ON 4 24 Set or change code 1 Press 2 Select Setup gt Channel settings gt Child lock 3 Select Set code or
12. Change code The Set code Change code menu appears 4 Enter your code using the Numeric buttons Follow the on screen instructions to create or change your PIN code oO Tip e If you forget your code enter 3693 to override any existing codes EN 15 4 25 View Scenea You can display a default picture as the wallpaper on your TV If the sleep timer is off the wallpaper is displayed for 240 minutes Otherwise it is displayed for the duration of the sleep timer 4 26 Switch on Scenea 1 Press 2 Select Scenea then pressOK The default picture is displayed 4 27 Change TV Menu Language o English preferences Picture Sound Sleep Timer EasyLink Location 3D World Clock Preferences Eye Care View Factory Settings ave Reinstall TV Program Edit Volume Bar 1 Press amp 2 Select Setup gt TV settings gt Preferences 3 Select one of the following then press OK e Menu language Select a menu language Phase Adjust the phase of image Only in VGA e Manual Clock Change the position of picture Only in VGA Auto Adjust Adjust the viewing format automatically to fit the size of screen Only in VGA Sleep timer Switch the TV to standby after a pre defined duration 16 EN Location Optimise TV settings for your location home or shop E sticker For shop mode only Switch the e sticker on or off
13. Off then pressOK 4 39 Control the device using TV remote keys Now use a single remote to control your CEC enabled device The play and pause buttons of remote can be used to control device Picture Easylink Sound Auto Device Off EasyLink Dynamic TV On Device Control Keys 3D Preferences Device Search Factory Settings Device List Reinstall TV Press Select Setup gt TV settings gt EasyLink gt Device Control Keys 3 Select On or Off then press OK 20 EN Search the HDMI CEC compliant devices connected to your TV and list them using Device list Devices Found Total Progress 1 Press Select Setup gt TV settings gt EasyLink gt Device Search 3 Select On or Off then pressOK 4 41 Use the Options menu Clock Status Ecology Device Menu Visit options relevant to current action or selection 1 While a CEC enabled device is connected press OPTIONS TheTV options menu appears 2 Select Device Menu then press OK e Device List Display the list of added devices Home Display the home page of added device Device ON OFF Switch the added device ON OFF Next Go to Next Chapter Program of Disc Previous Go to Previous Chapter Program of Disc e Play Pause Play or Pause the Program Fast Forward Fast Rewind Forward or Reverse the Program 5 3D Feature Picture 3D Mode Soun
14. Register your product and get support at www philips com welcome 58PFL9577 V7 EN User manual PHILIPS Contents 1 Notice 2 2 Important 3 Product Disposable Guidelines 4 3 Use yourTV 5 4 Use more of yourTV 9 5 3D Feature 21 6 Use of Internet 22 7 Play photos music and videos 23 on USB storage devices 8 Troubleshooting 25 9 Product information 27 10 Consumer Guideline 30 11 Warranty 31 EN 1 Notice Pixel characteristics This LCD LED product has a high number of color pixels Although it has effective pixels of 99 999 or more black dots or bright points of light red green or blue may appear constantly on the screen This is a structural property of the display within common industry standards and is not a malfunction Warranty No components are user serviceable Do not open or remove covers to the inside of the product Repairs may only be done by Philips Service Centres and official repair shops Failure to do shall void any warranty stated or implied Any operation expressly prohibited in this manual or any adjustments and assembly procedures not recommended or authorised in this manual shall void the warranty Note Disclaimer DTH service partner Videocon d2h 2 Important Read and understand all instructions before you use your TV If damage is caused by failure to follow instructions the warranty does not apply Safety Risk of el
15. Resolution refresh rate 480i 60Hz 480p 60Hz 576i 50Hz e 576p 50Hz 720p 60Hz 1080i 50Hz 60Hz 1080p 50 Hz 60Hz 9 2 Tuner Reception Transmission e Antenna input 750hm coaxial IEC75 e TV system PAL B G e Video playback NTSC SECAM PAL Tuner Bands UHF VHF 9 3 Remote control Type YKF305 003 e Batteries 2 x AAA LRO3 type 9 4 Power e Mains power 110 240V 50Hz 60Hz e Ambient temperature 5 to 40 degrees Celsius Power consumption 58PFL9577 V7 250W EN 27 9 5 Multimedia Supported storage device USB only FAT or FAT32 USB storage devices are supported File Type File Format File suffix MPEG1 MPEG2 MPEG4 MOV AVI MPG MOV MKV MP4 WMV Audio WMA MP3 WMA MP3 Image Formats Details Compressed Format Support Range Progressive JPEG Only Support 1024x768 1920X1080 Baseline Standard Baseline Optimize Support Single Color Support 16 Color S t ae 256 Color ae asa Audio Formats Details File Format Sampling Baud Rate Audio Channel 8K 48KHz 32K 320Kbps Mono Stereo 32K 48KHz 32K 320Kbps Mono Stereo Video Formats Details File Format Support Suffix Internal Encoder ee MPEG4 AVI MP4 ss MKV MOV MPEG1 2 4 The multimedia feature function may vary from file to file depending on relative informatio present in the file 28 EN 9 6 Supported TV mounts To mount the TV purchase a Philips TV mount
16. World Clock View the day and time of cities across the world e Eye Care View Adjust the backlight of TV according to the viewing distance BMI Body Mass Index Calculate your BMI by inputting your weight and height Program Edit Set favorite hide rename and reorder channels Only in TV source e Volume bar Display the volume bar when you adjust the volume e Auto switch off To conserve energy set the TV to switch off automatically after a period of inactivity Channel information size Change the type of information that is displayed when you switch channels TV position Apply the best settings for your TV based on how it is mounted 4 28 Start aTV demo You can use demonstrations to better understand the features of your TV Some demos are not available on certain models Available demos are displayed in the menu list 1 While you watch TV pres 2 Select Setup gt Watch demo 3 Select a demo and pressOK to view it 4 29 Reset the TV to factory 4 32 Manually install channels settings You can restore the default picture and sound Channel Installation Analogue Manual ante Find Channel settings of your TV The channel installation bol Arete she res s settings remain the same Store Current Channel Fine Tune Store as new channel A Picture Sound Only Picture and sound settings are reset to the factory settings The channel Installation will not be changed
17. album then press OK to play Realize mp3 7 3 Change music settings While you play music press OPTIONS to access one of the following settings then press OK Stop playback Stop music play Repeat Play once Play a song once or repeatedly Shuffle On Off Shuffle the songs Show info Display the file name Sound Change sound settings 7 4 Playing music while viewing slideshow You can view slideshow and play background music at the same time 1 Select one music album 2 Press OK 3 Press 5 to go back to the USB browsing page Select one photo album 5 Press OK to start playing the slideshow EN 23 7 5 Watch video 1 Inthe USB browser select Video then press OK Press OK to play To control play press the play buttons OK to play pause e I orb to play the previous or next video 7 6 Change video settings While you play video press i OPTIONS to access one of the following settings then presOK e Stop playback Stop video play e Repeat Play once Play once or repeatedly Shuffle On Off shuffle the videos Full Screen Small Screen Select screen size for playing e Show info Display the file name Smart Sound Select predefined Smart Sound Smart Picture Select predefined Smart Picture e 3D Change 3D settingsfor 3D video Note 3D option will available only when 3D content is played
18. ched on and selected as the source e Philips does not guarantee 100 interoperability with all HDMI CEC devices 4 36 Switch on or off EasyLink When you play an HDMI CEC compliant device the TV switches on from standby and switches to the correct source e If you do not intend to use Philips EasyLink switch it off Press f Select Setup gt TV settings gt EasyLink gt EasyLink 3 Select On or Off then pressOK Note e If EasyLink is OFF all its submenus are unavailable Picture EasyLink Sound Auto Device Off EasyLink Dynamic TV On 3D Device Control Keys Preferences Device Search Factory Settings Device List Reinstall TV 4 37 Switch the device ON or OFF When an HDMI CEC compliant device is connected and TV switches to standby the device gets turned OFF automatically 1 Press 2 Select Setup gt TV settings gt EasyLink gt Auto Device OFF 3 Select On or Off then pressOK EN 19 4 38 ae device ON in sync 4 40 Search the connected devices wit When an HDMI CEC compliant device is connected and itis switched On then the TV gets turned ON automatically Picture Easylink Sound Auto Device Off EasyLink Dynamic TV On 3D Device Control Keys p Preferences Device Search Factory Settings Device List Reinstall TV Press Select Setup gt TV settings gt EasyLink gt Dynamic TV ON 3 Select On or
19. d 3D Input Format On 3D Swap Auto 2D to 3D Easylink 3D Preferences Factory Settings Reinstall TV Press Select Setup gt TV settings gt 3D then pressOK Select one of the following settings then press OK 3D Mode Switch On Off or Convert 2D content into 3D Off Turn Off the 3D mode e On Turn On the 3D mode e Auto 2D to 3D Select this mode to convert 2D video programs into 3D 3D Input Format Select below input format for 3D content Play Side by Side Select this option when 3D content is Side by Side to get the proper 3D picture Top Bottom Select this option when 3D content is Top Bottom to get the proper 3D picture Frame Packing This function is used to watch Frame Packing 3D content Note e 3D Input Formats are only available in USB HDMI and DTH source 3D Swap This function is used to adjust 3D effect by Normal Swap function 3D Video Depth This function is used to change 3D Depth when you convert 2D content into 3D Note e 3D Video Depth is applicable only for Auto 2D to 3D mode and applicable only in RF AV amp YPbPr sources Optimal 3D viewing For an optimal 3D viewing experience recommend that you 1 sit at least 3 times the height of the screen away from the TV but no further than 6 meter away 2 avoid fluorescent lighting such as TL lighting or certain energy saving light bulbs which operate on a
20. e 4 Use more of your TV 4 1 Main Menu Menus help you to install channels change picture and sound settings and access other features 1 Press The menu screen appears 2 Select one of the following then press OK e Watch TV If a source other than antenna is selected switch back to the antenna source Browse USB View photos and play music and movies contained in USB storage devices e Scenea Switch on Scenea wallpaper Add new device Add new devices to the home menu Setup Access menus to change picture sound and other settings 3 Add device to the home menu After you connect a device add it to the home menu e Press Select Add new device e Follow the onscreen instructions to add the device to the home menu The device is displayed in the home menu e To watch the device switch it on then select it in the home menu e You can also select the device with the source button 4 2 Rename devices from the home menu After you add a new device to the home menu you can rename it to your preference Note The device name can be up to 16 characters long 1 Press amp Select a device to rename 3 Press OPTIONS The options menu appears 4 Select Rename device then pressOK A text input box appears 5 Select characters thenpress OK to confirm 6 When the new name is complete select Done then pressOK EN
21. e channels are marked by an asterisk when you view the channel grid 4 16 Manage the favorite list 1 While you watch TV press OK The channel matrix menu appears Press OPTIONS Select Mark favorite Unmark favorite then pressOK The channel is marked or unmarked from the favorite list w N 4 17 Display the TV clock 1 While you watch TV press OPTIONS The options menu is displayed Select Clock Press OK Wn Note e To disable the clock repeat the procedure 14 EN 4 18 Use timers You can set sleep timers to switch the TV to standby at a specified time Tip Set the TV clock before you use timers 4 19 Automatically switch the TV to standby sleep timer Sleep timer switches the TV to standby after a pre defined duration Tip e You can switch off your TV earlier or reset the sleep timer during the countdown Press f Select Setup gt TV settings gt Preferences gt Sleep timer The Sleep timer menu appears NO FR 3 Select a value between zero and 180 minutes If you select zero the sleep timer switches off 4 Press OK to switch on the sleep timer TheTV switches to standby after the specified time 4 20 Lock unsuitable content You can prevent your children from watching certain programmes or channels by locking the TV controls Channel installation Channel Lock Child Lock Video Lock Front Panel Lock
22. ectric shock or fire e Never expose the TV to rain or water Never place liquid containers such as vases near the TV If liquids are spilt on or into the TV disconnect the TV from the power outlet immediately Contact Philips Consumer Care to have the TV checked before use e Never place the TV remote control or batteries near naked flames or other heat sources including direct sunlight To prevent the spread of fire keep candles or other flames away from the TV remote control and batteries at all times e Never insert objects into the ventilation slots or other openings on the TV e When the TV is swivelled ensure that no strain is exerted on the power cord Strain on the power cord can loosen connections and cause arcing Risk of short circuit or fire e Never expose the remote control or batteries to rain water or excessive heat e Avoid force coming onto power plugs Loose power plugs can cause arcing or fire Risk of injury or damage to the TV e Two people are required to lift and carry a TV that weighs more than 25 kg or 55 Ibs e When stand mounting the TV use only the supplied stand Secure the stand to the TV tightly Place the TV on a flat level surface that can support the combined weight of the TV and the stand e When wall mounting the TV use only a wall mount that can support the weight of the TV Secure the wall mount to a wall that can support the combined weight of the TV and wall mount PE Elect
23. ed Type no Serial No ____ Date of Purchase Purchased By Name Address Tel No Sold by Name Address Tel No PHILIPS Model no 5gpFL9577 V7 Sold by User rubber stamp Serial no m Contact Customer Service Executive at 1860 180 1111 Standard Call Rates Apply 1800 102 2929 Toll Free No Regd Office PE Electronics Ltd Auto Cars Compound Adalat Road Aurangabad 431005 30 EN WARRANTY This TV receiver is covered under From whom the set has been purchased or warranty against any defect arising out through an Authorised Service Center for of faulty or defective material or workman warranty service However if the ship for a period of 12 months from the Purchaser has to shift his residence to date of purchase another town on account of transfer or other reasons the warranty benefit will be Should a defect develop in this set during available at the Authorised Service Center the period of warranty PE Electronics of that town Limited undertakes to get the set repaired free of charge either The warranty Is not valid in case of any of the following events The TV set is not used according to instructions given in the Direction for use User Manual Defects are caused by improper or reckless use Any repair work carried out by persons other than a Philips dealer or Authorised Service Center Any modification or alteration of any nature made in the electrical circuitry of the set
24. ed to access media files from Mobile Computer Laptop which is connected in Network sharing TV will detect all devices which are present in Network sharing of Local Area Network PHILIPS Portal This function has predefine Apps like Social Network Weather News Games Internet Radio Maps etc User can go to PHILIPS Portal and directly access above mentioned Apps User can visit Apps gallary to access more Apps PHILIPS Portal is property of PE Electronics Ltd PHILIPS portal will be time to time upgrade to provide better Internet experience to user Note Recommended Data Card eIdea Netsetter TATA Photon Reliance Netconnect Recommended Wi fi Dongle Use Philips specific Wi fi dongle to connect TV with Wi fi connection 7 Play photos music and videos on USB storage devices Caution e Philips is not responsible if the USB storage device is not supported nor is it responsible for damage or loss of data from the device Note When USB is connected TV set will go to USB source after every stand by a f nieis I 7 1 Connect a USB storage device to play photos music or videos stored on it Switch on the TV Connect the USB device to the USB port on the side of your TV 3 Press 4 Select Browse USB then press OK The USB browser appears 7 2 Listen to music 1 Inthe USB browser select Music then press OK 2 Select a music track or
25. ename channels The name appears when you select the channel 1 While you watch TV press OK The channel matrix menu is displayed 2 Select the channel to rename 3 Press OPTIONS The channel options menu appears 4 Select Rename channel then press OK A text input box appears 5 Press gt A lt v_ to select each character then press OK 6 When the name is complete select Done then press OK 18 EN 4 34 Rearrange channels After you install channels you can rearrange the order in which they appear 1 While you watch TV press OK The channel matrix menu is displayed 2 Press OPTIONS The channel options menu appears 3 Select Reorder then press OK Select the channel to rearrange then press OK The selected channel is highlighted 5 Move the highlighted channel to its new location then press OK Press OPTIONS Select Done reordering then press OK 4 35 Use Philips EasyLink Get the most out of your HDMI Consumer Electronic Control CEC compliant devices with Philips EasyLink enhanced control features If your HDMI CEC compliant devices are connected through HDMI you can control them at the same time with your TV remote control To enable Philips EasyLink you need to e Connect HDMI CEC compliant devices through HDMI e Configure each HDMI CEC compliant device properly e Switch on EasyLink Note e The EasyLink compliant device must be swit
26. he antenna is properly connected to the TV e Check that the correct device is selected as the TV source There is sound but no picture e Check that the picture settings are correctly set There is poor TV reception from an antenna connection e Check that the antenna is properly connected to the TV e Loudspeakers unearthed audio devices neon lights high buildings and other large objects can influence reception quality If possible try to improve the reception quality by changing the antenna direction or moving devices away from the TV e If reception on only one channel is poor fine tune this channel There is poor picture quality from connected devices e Check that the devices are connected properly e Check that the picture settings are correctly set The TV did not save your picture settings e Check that the TV location is set to the home setting This mode offers you the flexibility to change and save settings The picture does not fit the screen it is too big or too small e Try using a different picture format The picture position is incorrect e Picture signals from some devices may not fit the screen correctly Check the signal output of the device EN 25 8 4 Sound issues There is a picture but no sound is there e If no audio signal is detected the TV automatically switches the audio output off this does not indicate malfunction e Check that all cables are properly connected
27. l devices press picture settings tt ADJUST then select Smart picture or A Smart sound for quick access to picture and Reset Reset to factory default settings sound settings Contrast Adjust the intensity of backlight areas while the video contents are kept unchanged e Brightness Adjust the intensity and details of dark areas Color Adjust color saturation Sharpness Adjust sharpness in the image e Hue Compensate for color variations Available only for NTSC channels 10 EN Noise reduction Filter and reduce 1 Press tt ADJUST noise in an image Temporal Noise reduction 2 Select Smart picture then pressOK Recommended for analog sources 3 Select one of the following settings then MPEG Noise reduction press OK Recommended for digital sources Personal Apply your customised Color Temperature Adjust the color picture settings balance in an image Cinema Ideal settings for movies Perfect Pixel HD To enhance the Sport Ideal settings for sport picture quality e Vivid Rich and dynamic settings HD Natural Motion Minimize ideal for daytime f juddering effects and enhance Bright Ideal settings for night time picture smoothness Dynamic contrast Enhance contrast Medium setting is recommended Dynamic backlight Adjust brightness of the TV backlight to match lighting conditions 4 8 Change pict
28. low frequency and direct sunlight as they may interfere with 3D experiences Health warning 1 If you or your family has a history of epilepsy or photosensitive seizures consult a medical professional before exposing yourself to flashing light sources rapid image sequences or 3D viewing 2 To avoid discomfort such as dizziness headache or disorientation we recommend not watching 3D for extended periods of time 3 If you experience any discomfort stop watching 3D and do not immediately engage in any potentially hazardous activity for example driving a car until your symptoms have disappeared If symptoms persist do not resume watching 3D without consulting a medical professional first 4 Parents should monitor their children during 3D viewing and ensure they do not experience any discomfort as mentioned above Watching 3D is not recommended for children under 6 years of age as their visual system is not fully developed yet 5 Do not use the 3D glasses for any purpose other than watching 3D TV Source Support list 1 2D to 3D supported in all sources except VGA 2 Side By Side and Top Bottom supported in HDMI amp USB Source Only 3 3D Mode is not supported in VGA mode EN 21 6 Use of Internet Setup H H eg ture and Search for Channels Connect to d Settings Network TV Settings Channel Settings Network Settings Software Settings 6 1 Network Settings 1 Press amp 2 Select Setup gt Selec
29. mp 2 Select Setup gt TV Settings gt Preferences gt Auto Adjust 26 EN Check if the Ethernet cable is inserted properly Check if Network settings are given properly Check if TV is placed within Wireless range Check if Wireless settingsares inserted properly Check if Data card settings are proper 8 9 3D working issues Check you are using provided 3D glasses Check if 3D settings in TV sets are set properly 8 10 Contact us If you cannot resolve your problem refer to the FAQs for this product at www philips com support or contact Customer Service Centre I N Warning Do not attempt to repair the product yourself This may cause severe injury irreparable damage to your product or void your warranty Note e Make a note of your TV model and serial number before you contact Philips These numbers are printed on the back of the TV and on the packaging 9 Product information Product information is subject to change without notice For detailed product information go to www philips com support 9 1 Supported display resolutions Computer formats VGA Resolution refresh rate e 640 x 480 60Hz 72Hz 75Hz 800 x 600 56Hz 60Hz 72Hz 75Hz 1280 x 1024 60Hz e 1600 x 1200 60Hz Video formats YPbPr e Resolution refresh rate 480i 60Hz 480p 60Hz e 576i 50Hz e 576p 50Hz e 720p 50Hz 60Hz e 1080i 50Hz 60Hz Computer formats HDMI e
30. ons as Fast Forward lt In USB it functions as Fast Reverse AV In USB navigate through menu pages tracks albums or folders ft ATV Menu Analog TV Menu e Access the ATV menu Color buttons Only in DTH source e Select tasks or options d2h e Access DTH source directly from any other source INFO e View Info about DTH channels and current source LANGUAGE e Toggle DTH language between English and Hindi MOSAIC View channels in PIP e Access Mosaic menu of DTH 22 SOURCE e Select connected devices 3 3 Remote control usage When you use the remote control hold it close to the TV and point it at the remote control sensor Make sure that the line of sight between the remote control and TV is not blocked by furniture walls or other objects PHILIPS EN 7 3 4 Battery Installation 1 Remove the battery compartment door 2 Install 2 AAA or UM 4 1 5V batteries or equivalent with the correct polarity as indicated 3 Refix the battery compartment door NOTE Remove batteries when they are exhausted or if the remote control is not to be used for a long time BATTERY PRECAUTIONS Incorrect use of batteries can cause electrolyte leakage which will corrode the remote handset or cause the batteries to burst Replace both batteries at the same time e Don t mix battery types alkaline with carbon zinc etc Don t recharg
31. ower outlet On purchase of the product Subscription of DTH service is not mandatory Product disposal Guidelines For the purpose of recycling to facilitate effective utilization of resources please return this product to a nearby authorized collection center registered dismantler recycler service center when disposing of this product In case of further assistance you may contact nearest authorized service center Or Please see the Company website for further information on collection centers etc I Visit http www philips com OR Standard Call Rates Apply 1860 180 1111 Toll Free Number 1800 102 2929 eer ar ara S GT AIM Vy Oe HTS ter ga a A Gum Pace aga SIT Hx iga sore oT Raaen GA sat Bl aT He ates areri amp fre reti afta aha er Gar Bz ah at lay axe Sat sath at Fare aad 3 fe arr art a Age Fa Visit http www philips com OR Standard Call Rates Apply 1860 180 1111 Toll Free Number 1800 102 2929 7 RONS 4 EN 3 Useyour TV Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your TV at www philips com welcome 3 1 Nameand Function of Control on Set 58PFL9577 V7 A TV Controls and Indicators 1 LED INDICATOR 2 IR SENSOR 3 VOL 4 VOL B Connectivity 1 A9 5 CH 6 CH 7 MENU 8 SOURCE Q3
32. ronics Ltd bears no responsibility for improper wall mounting that result in accident injury or damage Risk of injury to children Follow these precautions to prevent the TV from toppling over and causing injury to children e Never place the TV on a surface covered by a cloth or other material that can be pulled away e Ensure that no part of the TV hangs over the edge of the surface e Never place the TV on tall furniture such as a bookcase without anchoring both the furniture and TV to the wall or a suitable support e Educate children about the dangers of climbing on furniture to reach the TV Risk of swallowing batteries e The product remote control may contain a coin type battery which can be swallowed Keep the battery out of reach of children at all times Risk of overheating Never install the TV in a confined space Always leave a space of at least 4 inches or 10 cm around the TV for ventilation Ensure curtains or other objects never cover the ventilation slots on the TV EN 3 Risk of damage to the TV Before you connect the TV to the power Screen care outlet ensure that the power voltage matches the value printed on the back Avoid stationary images as much as of the TV Never connect the TV to the possible Stationary images are images power outlet if the voltage is different that remain on screen for extended Risk of injury fire or power cord damage periods of time Examples include
33. s Enhance the volume without disturbing sound quality e Incredible Surround Switch On Spatial Sound Auto volume levelling Automatically reduce sudden volume changes for example when switching channels e Balance Adjust the balance of the right and left speakers e AV Out Select Fixed for default Settings and variable to vary it e Equalizer Adjust the equalizer on various frequencies 4 12 Use smart sound Use smart sound to apply pre defined sound settings 3D format 12 EN 1 Press tt ADJUST 2 Select Smart sound then press OK 3 Select one of the following settings then press OK Cinema Ideal settings for movies Standard Settings that suit most environments and types of audio News Ideal settings for spoken audio such as news Personal Apply the settings that were customised in the sound menu 4 13 Use the Options menu Status Ecology Visit options relevant to current action or selection 1 While you watch TV press OPTIONS TheTV options menu appears 2 Select one of the following options then press OK e Clock Display time Status Display information concerning currently viewing channel Ecology Relevant setups Energy Saving This conserves most energy Select Low Mid or High Mute Screen The TV display will turn off Conserves maximum energy Tip e Press any key except vol and
34. t Network Settings e Wired Select this option to do Wired network settings Follow the instruction displayed on TV screen e Wireless Select this option to do Wireless network settings Follow the instruction displayed on TV screen Data card Select this option to use Data card SSS e To get the better Internet connectivity use Broadband Internet connection e Speed of internet access is depends on Internet Service Provider e Philips does not guaranteed to support all Data cards IP address and other settings for Internet connection will be provided by Internet Service Provider 22 EN 6 2 Connect to Network 1 Press amp 2 Select Setup gt Select Connect to Network e Mail This function is used to check emails Follow the onscreen instruction to view emails e Chat This function is used to do chat with preloaded Chat Options Also user can add New Chat account in this function e Web This function is used to surf the Web User can access any website through Web Browser e File Sharing This function is used to access media files from specific Mobile Computer Laptop which is connected in Network sharing It require IP address of other device which user user want to access the media files e User can access only Photos Music and Videos in File Sharing function e User can access only those formats which are supports in USB e UPnP This function is us
35. u re format Color enhancement Make 1 Press tit ADJUST colors more vivid and improve the E details in bright colors You can 2 Select Picture format then pressOK switch this feature on or off 3 Select any picture format then press OK Picture Format Change the picture format H Position Adjust the horizontal position of image Only in VGA V Position Adjust the vertical T CD position of image Only in VGA 4 7 Use smart picture Use smart picture to apply pre defined picture settings Picture Format Picture Shift Note e Picture format cannot be adjusted in d2h source e Picture format will be available depending on source Ch Up Ch Smart Sound 3D format EN 11 4 10 Use picture shift 4 11 Manually adjust sound settings Only in VGA 1 Press th ADJUST Picture Smart Sound Cinema 2 Select Picture shift then press OK song Reset Standard 3 Shift the picture then pressOK EasyLink Loudness divs 3D Incredible Surround Personal Preferences Auto Volume Levelling Factory Settings Balance Reinstall TV AV Out es CO Equalizer 1 Press amp 2 Select Setup gt TV settings gt Sound Picture Format Picture Shift then pressOK 3 Select one of the following settings then press OK A Note Smart sound Access predefined smart sound settings e This menu can be accessed only in VGA source Reset Reset to factory default settings Loudnes
Download Pdf Manuals
Related Search