Panasonic MC-YL699 vacuum cleaner
Contents
1.2.
3.
4.
5. 1 PART NAMES AND THEIR ASSEMBLY Curved wand Projection Suction regulator Extension wands 4 2 Hose 3 01 5 Extension wand holder 51 IF Floor nozzle 00 Hose supporter Hose connection wand 2 Push together until the projection clicks into place in the curved wand hose connection wand hole
6. Insert the hose connection wand into the hose inlet ON OFF switch Filter Dust box Blower Expander Crevice tool Hose inlet OPERATING YOUR VACUUM CLEANER Carrying 6 How to use the blower For locations where the nozzle will not enter connect the hose to the blower and blow the dust out
7. Please ensure to place the filter supporter to its original location in order to avoid filter supporter become deform which can cause dust leaking When secondary filter becomes dirty Rise it with water and dry completely before reusing Khi luw ri loc thir c p bi TROUBLESHOOTING What to do if your cleaner does not work
8. Carrying handle Motor Housing Vac gauge Cord storage hook Secondary filter ID 1 gt 80 1 2 12 Filter supporter 90 50 1 2 Upholstery nozzle 2 54 Protects the dust box from static electricity 0 0 9 27 lt 5 Grounding chain e 3 Align the triangle markings and push in the dust box until it clicks into place with the Once it is fixed into place it cannot be removed
9. MAINTAINING YOUR VACUUM CLEANER A 07 0 The plug must be removed from the socket outlet before cleaning or maintaining the appliance IMPORTANT Before re installing the washable filter make sure they are completely dry to avoid damaging the cleaner 0 6 Remove refuse with the brush NEAT 6 6216 0 3000 5
10. 4 ZT 9 When traveling over steps in the floor always hold the vacuum cleaner by the handle so that it does not fall over When using the crevice tool the vac gauge does not display correctly so remove the crevice tool before checking the vac gauge Turn on the on off Use the nozzle that is appropriate for the location you are cleaning Flooring Press lever A Carpet Press lever 8
11. 8 8 7 Groove Projection Lift the nozzle off the floor and if the vac gauge turns red discard the To decrease the suction power To clean the dust in difficult to reach places Turn the hose connection wand until the projection is hidden by the groove as shown in the diagram STORING YOUR VACUUM CLEANER Cord storage hook To store the power cord
12. ETT 00 5 2 7 E TO E 7 7 2 Panasonic Corporation http www panasonic net Printed in Japan Panasonic Corporation 2009 V01Z99000
13. Check that the appliance is correctly plugged in and that the socket outlet is working In case that the thermal cut off device has operated wait until it resets after approximately 60 minutes If after having checked the mentioned points the cleaner does not work take it to an Authorized Service Centre to be repaired What to do it the suction performance reduces Stop the cleaner and unplug from the socket outlet Check whether the wands hose and accessories are blocked or not lf they are blocked remove the obstruction Check that the dust box is full If it is full empty it Check that filter is blocked wit
14. 5 8 PIS 4 Wipe with a soft cloth soaked with water 11 NOTE Dry filters completely in the air Do not bend pull and step on the hose or put anything heavy on it LELE ae Remove the expander from the filter as illustrated Wash the filter in water by hand Do not use washer or dryer When filter becomes completely dry replace it as in the same manner in reverse
15. use the cord storage hook Crevice tool Upholstery nozzle For narrow places For cushions and draperies 0 2 DISCARDING THE DUST Removing the filter If the vac gauge turns red discard the dust Pull the clamps Remove the motor housing hanging upward with the 602 9 Pull the expander upward and shake it about ten times Never shake up and down and leave
16. Panasonic Operating Instructions Vacuum Cleaner Model No N C YL9K Thank you for your purchase of this product Before use please read this instruction manual completely in order to use this product properly and ensure its lasting operation After reading this manual store it safely 96 TABLE OF CONTENTS Discarding the dust Maintaining your vacuum cleaner 5360 Important safety instructions for the user Part names and thei
17. h dust If it is blocked with dust clean it first 13 SPECIFICATIONS MODEL NO MC YL699K INPUT POWER MAX 2100W 20L 8m DUST CAPACITY CORD LENGTH mM 1 1 11111 NET WEIGHT EXTENTION WANDS BLOWER OPERATION FLOOR NOZZLE 2 STEP ACCESSORIES CREVICE TOOL UPHOLSTERY NOZZLE
18. r assembly Troubleshooting Operating your vacuum cleaner Specifications Storing your vacuum cleaner IMPORTANT SAFETY INSTRUCTIONS FOR THE USER Before using the vacuum cleaner please observe these basic precautions WARNING To reduce the risk of fire electric shock or injury A This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety Children should be supervised to ensure that they do not play with the appliance Do not
19. the hose connected 10 10 Remove the filter and empty dirt and dust 1 Panasonic 5 9 Motor housing 00 Install the filter Fix the motor housing and lock the Expander Filter TAN 6 Panasonic Clamp Hose r
20. use the appliance if the power cord or plug is damaged or faulty This appliance is provided with a flexible cord and if this becomes damaged it must be repaired by an Authorized Service Centre or a qualified person in order to avoid any hazard Unplug from the socket outlet when not in use and before cleaning the appliance or undertaking maintenance operations Turn off the appliance before removing the plug Do not pull on the power cord always pull on the plug body itself Do not handle plug or vacuum cleaner with wet hands Do not use wet filters after wash make sure they are completely dry to avoid damaging the cleaner Do not vacuum flammable or combustible substances neither use in areas where they may be present Do not vacuum hot ash embers or large and sharp objects Do not vacuum water or other liquids Keep the vacuum cleaner away from heat sources such as radiators fires direct sunlight etc This vacuum cleaner is fitted with a thermal cut out device which automatically turns off the cleaner to prevent overheating of the motor When this happens disconnect the cleaner from the socket outlet and check the dust compartment and filters as they may be full or clogged with fine dust Check for any other obstructions in the hose or tube After removing the obstruction leave the cleaner to cool down until the thermal cut out resets after approximately 60 minutes
Download Pdf Manuals
Related Search