Home

Checkolite P1006-71

1. 6 SHADE 9 10 BULB NOT INCLUDED CEILING STRUCTURE MEMBER OR CROSS BRACE CEILING WALL BOARD SUPPLY WIRES SUPPLY GROUND WIRE el CEILING JUNCTION BOX HEX NUT MOUNTING BAR DECORATIVE KNOB IMPORTANT TURN POWER AT MAIN FUSE OR CIRCUIT BREAKER BOX BEFORE STARTING INSTALLATION RECOMMEND THIS PRODUCT BE INSTALLED BY A QUALIFIED ELECTRICIAN TO REDUCE RISK OF FIRE AND ELECTRICAL SHOCK 1 A Screw about 1 2 of threaded pipe into center hole in mounting bar Note The protruding side lips of mounting bar must face threaded pipe See diagram B Attach mounting bar to ceiling junction box with two machine screws supplied with junction box through slot at each end of mounting bar C At this point test install the canopy onto ceiling through this threaded pipe and make certain 5 16 of threaded pipe protrude below the canopy If not then adjust the threaded pipe location by screwing up or down accordingly D Once correct threaded pipe location has been adjusted remove canopy and mounting bar from junction box E Lock threaded pipe into mounting bar by fastening a hex nut from above Note Do not spin threaded pipe during tightening OVER 50lbs CHAIN SUSPENDED FIXTURE INSTALLATION INSTRUCTION 2 To hang fixtures weighing over 50 Ibs over 25 Ibs in Canada the mounting bar must be supported independently of
2. 265 9960 QS Oe mays Printed in China RRR atewss
3. Kitchen Essentials by checkolite Model P1006 71 ASSEMBLY INSTRUCTIONS CAUTION shut off main electrical supply from the main fuse box circuit breaker We recommend that a qualified electrician install this fixture and that installation meet all state amp local electrical codes Steps 1 Carefully remove all parts from package Please verify that all parts are present before discarding carton and packing materials 2 Place fixture 1 on a smooth flat surface 3 Connect upper frame 2 and fixture 1 using nut 3 small nipple 4 iron support arm 5 4 Place shade 6 and metal ring 7 onto the cup 8 and lock it with socket ring 9 5 Install bulb 10 Use 2 x 50 watt type r 20 or less medium base 6 Open up one end of C loop by turning the small threaded collar 11 and attach the C loop to the top loop of the ceiling fixture Make sure to close the collar portion of the C loop once you have connected the chain and fixture base together CANOPY C LOOP DECORATIVE KNOB 11 SMALL THREADED COLLAR 2 UPPER FRAME 3 NUT chy ode 4 SMALL NIPPLE J J S S Y ae 5 IRON SUPPORT ARM ey 8 CUP 1 FIXTURE ee ae 9 o B 0 we o B UNENE a 7 METAL RING 9 SOCKET RING gt
4. the ceiling junction box Recommend minimum of two 1 4 diameter screws or bolts not supplied rated for 200 Ibs or greater which must have sufficient length to be installed through the mounting bar junction box and securely into the ceiling structure member or cross brace This installation must be able to support at least four times the weight of the fixture Check this fact before starting assembly If unsure please consult a qualified technician 3 Fasten back two machine screws supplied with junction box through slot at each end of mounting bar and into junction box 4 Fasten another hex nut onto bottom end of threaded pipe Min 60 C supply conductors 5 Fixture wire connections Connect clear smooth side fixture wire to black supply wire and clear ridged side fixture wire to white supply wire Note Make certain no loose conductors protrude outside of wire connectors And make certain all wires are securely held together by wire connectors 6 Ground wire connection Connect fixture ground wire to supply ground wire with wire connector Important Never connect ground wire to black or white supply wires 7 Once all wires are connected tuck them carefully into junction box Then raise canopy against the ceiling and lock into position by screwing decorative knob onto the threaded pipe us LISTED Checkolite International Inc 142 Charles Street Jersey City NJ 07307 www checkolite com 1 800

Checkolite P1006-71

Contents

Download Pdf Manuals

Related Search

Related Contents