Hunter 28702 fan
Contents
1. Installer s Choice and Optional Accessories Support Brace Ceiling Standard Outlet Box Mounting gt Style Standard Mounting hangs from the ceiling by a downrod included Angled Mounting recommended for a vaulted or angled ceiling Understanding Mounting and Installers Choice Hunter s patented 2 position mounting system provides you maximum installation flexibility and ease You can install your Hunter fan in one of two ways depending on ceiling height and your preference Standard or Angled The steps in this manual include instructions for both Installer s Choice mounting methods Considering Optional Accessories Consider using Hunter s optional accessories including a wall mounted or remote speed control To install and use the accessories follow the instructions included with each product For quiet and optimum performance of your Hunter fan use only Hunter speed controls For ceilings higher than 8 feet you can purchase Hunter extension downrods All Hunter fans use sturdy 3 4 diameter pipe to assure stability and wobble free performance A CAUTION To reduce the risk of personal injury attach the fan directly to the support structure of the building according to these instructions and use only the hardware supplied 5 42441 01 06 14 11 Hunter Fan Company l Getting Ready To install a ceiling fan be sure you c2. P IS ode For reference also attach your receipt or a copy of your receipt to the manual For Your Records and Warranty Assistance 0 a 3 VI INI NAI J F n Owner s Guide and Installation Manual Where Purchased SINCE 1886 Form 42441 01 20110614 2011 Hunter Fan Co Welcome Your new Hunter ceiling fan is an addition to your home or office that will provide comfort and performance for many years This installation and operation manual gives you complete instructions for installing and operating your fan We are proud of our work We appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world Before installing your fan for your records and warranty assistance record information from the carton and Hunter nameplate label located on the top of the fan motor housing Cautions and Warnings e READ THIS ENTIRE MANUAL CAREFULLY BEFORE BEGINNING INSTALLATION SAVE THESE INSTRUCTIONS e Use only Hunter replacement parts e To reduce the risk of personal injury attach the fan directly to the support structure of the building according to these instructions 1 Getting Ready and use only the hardware supplied To avoid possible electrical shock before installing your fan disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location If you cannot lock the circuit breakers in the off
3. including interference that may Transmitter 1 Transmitter 2 cause undesired operation A WARNING Use only the Hunter Fan speed control supplied with this fan 4 4 Raise the fan and align the slots in the canopy with the hooks on the ceiling plate DIP Switches DIP Switches Set to 0111 Set to 0100 Note To hang the fan you must tilt the canopy to an almost vertical position so that the canopy slots sit on the ceiling plate hooks 9 42441 01 06 14 11 Hunter Fan Company 5 Wiring the Fan All wiring must be in accordance with national and local electrical codes and ANSI NFPA 70 If you are unfamiliar with wiring use a qualified electrician omen 5 1 Make sure the power is still off 5 2 To connect the wires hold the bare metal leads together and place a wire connector over them then twist clockwise until tight For all these connections use the wire connectors provided A CAUTION Be sure no bare wire or wire strands are visible after making connections A lt gt 5 3 Using a large wire connector connect the ground wire from the Receiver ceiling to the green ground wire from the ceiling plate and the Steps 5 3 5 7 green ground wire from the downrod 5 4 Using the large wire connectors connect the white wire and the black wire from the ceiling as follows e The white Common power wire from the ceiling to the white wire from the receiver marked on white tag N
4. WARNING Fan may fall if not assembled as directed in these installation instructions 3 1 Unbundle the wires from the fan For Standard or Angled mounting 3 2 Insert the downrod through the canopy and canopy trim ring Feed the wires from the fan through the downrod on one side of the pin in the ball 3 3 Loosen the square head setscrew on the adapter to install the pipe and ball assembly Note When the pipe and ball assembly is fully installed 2 3 threads on the pipe will still be visible this is normal Securely retighten the setscrew with a wrench or pliers A CAUTION The adapter has a special coating on the threads Do not remove this coating the coating prevents the downrod from unscrewing Once assembled do not remove the downrod Hanging the Fan Note To hang the fan you must tilt the canopy to an almost vertical position so that the canopy slots sit on the ceiling plate hooks 3 4 Raise the fan and align the slots in the canopy with the hooks on the ceiling plate 3 5 Place the slots over the hooks to hang the fan 8 Standard or Angled Mounting Steps 3 2 3 3 lt m Downrod lt lt Canopy lt Canopy Setscrew Trim Ring Gk l 42441 01 06 14 11 Hunter Fan Company 4 Setting the Remote Transmitter and Receiver i i Receiver DIP Setting DIP switches switches When two or more fans are located near each other you may desire to ha
5. inches of lead wires extend from outlet box Suitable Existing Fan Site Fan Support System Outlet Box If your existing fan site is suitable skip ahead to Section 2 Installing the Ceiling Plate 3 42441 01 06 14 11 Hunter Fan Company Ceiling Height Preparing the Fan Site continued Step 2 Cut the Ceiling Hole 2 1 Locate the site for the ceiling hole directly below the joist or support brace that will hold the outlet box and fan 2 2 Cut a 4 diameter hole through the drywall or plaster of the ceiling You will use the hole to install the support brace and outlet box Step 3 Install a Support Brace If Necessary Determine if there is a ceiling joist directly above the ceiling hole If the joist is there determine if it is positioned to allow you to recess the outlet box a minimum of 1 16 into the ceiling If NOT install a support brace as follows 3 1 Attach a 2 x 4 support brace between two joists Position it to allow you to recess the bottom of the outlet box a minimum of 1 16 into the ceiling 3 2 Check the support brace to ensure it will support the full weight of the fan and light kit Step 4 Install the Outlet Box 4 1 Obtain a UL approved octagonal 4 x 1 1 2 outlet box plus two 8 x 1 1 2 wood screws and washers available from any hardware store or electrical supply house 4 2 Orient the outlet box so that both the inner and oute
6. kit mounting plate Failure to properly attach and tighten all three assembly screws could result in the light kit top housing and light fixture falling 13 42441 01 06 14 11 Hunter Fan Company Housing Assembly Screw 8 5 8 6 8 e Completing Your Installation With a Bowl Light Fixture Continued To attach the light kit connect the upper plug connector from the motor to the lower plug connector in the light kit Note Both plug connectors are polarized and will only fit together one way Make sure the connectors are properly aligned before connecting them Incorrect connection could cause improper operation and damage to the product Place the light kit over the light kit top housing Align the holes in the light kit top housing with the light kit Attach the light kit to the light kit top housing with three housing assembly screws Tighten all three screws firmly 14 kham i l Housing Light Kit Assembly Screw Steps 8 5 8 6 Plug A Connector Detail Housing Assembly Screw 42441 01 06 14 11 Hunter Fan Company 8 Completing Your Installation With a Light Fixture Continued Installing the Glass Bowl 8 7 First install the included CFL bulbs into the sockets 8 8 Lift the glass bowl up to the light kit top housing Align the three tabs in the glass bowl with the three slots in the light kit top hou
7. location without a dimming control If you need parts or service assistance please call 888 830 1326 In Canada call 866 268 1936 or visit us at our website at http www hunterfan com Hunter Fan Company 7130 Goodlett Farms Parkway 400 Memphis Tennessee 38016 18 42441 01 06 14 11 Hunter Fan Company
8. position securely fasten a prominent warning device such as a tag to the service panel All wiring must be in accordance with national and local electrical codes and ANSI NFPA 70 If you are unfamiliar with wiring use a qualified electrician To reduce the risk of personal injury do not bend the blade attachment system when installing balancing or cleaning the fan Never insert foreign objects between rotating fan blades To reduce the risk of fire electrical shock or motor damage do not use a Solid state speed control with this fan Use only Hunter speed controls which are solid state 10 Operating and Cleaning Your Ceiling e This product conforms to UL STD 507 and is certified to STD C22 2 No 113 e Wash your hands after your fan installation is complete Table Of Contents 2 Installing the Ceiling Plate 3 e Assembling and Hanging the Fan 8 4 e Setting the Remote Transmitter and Receiver 8 Completing Your Installation With a Light Fixture 9 Operating the Remote Control and Mounting the Holder 2011 Hunter Fan Company 9 42441 01 06 14 11 Hunter Fan Company Preparing the Fan Site Step 1 Choose the Fan Site Proper ceiling fan location and attachment to the building structure are essential for safety reliable operation maximum efficiency and energy savings Choose a fan site where e No object can come in contact with the rotating fan blades during normal op
9. EUTRAL IN e The black power wire from the ceiling to the black wire from Large Wire the receiver marked on red tag LIVE IN Connector 5 5 Using the small wire connectors connect the wires from the fan as follows e The black wire with a white stripe from the fan to the red wire from the receiver marked on white tag LIGHT OUT Small Wire e The black wire from the fan to the black wire from the receiver Connector marked on white tag FAN OUT e The white wire from the fan to the white wire from the receiver marked on white tag COMMON OUT 5 6 Check each connection to make sure no bare wire or wire strands are visible Push all wires and wire connectors except for the white antenna wire from the receiver back through the ceiling plate into the outlet box 5 7 Position the receiver in the canopy so that the antenna is close to the edge of the ceiling plate for clear reception 10 42441 01 06 14 11 Hunter Fan Company 6 Installing the Canopy and Canopy Trim Ring A WARNING Failure to complete the following steps could cause the fan to fall Note It is recommended you use a magnetic tip screwdriver for the following steps 6 1 6 2 6 3 6 6 Rotate the hanger ball so the tab in the canopy is secure in the hanger ball groove Note Your fan may have multiple tabs and grooves that must be aligned Swing the fan up to align the canopy screw holes with the mounting holes
10. an do the following e Locate the ceiling joist or other suitable support in ceiling e Drill holes for and install wood screws e Identify and connect electrical wires e Lift 40 pounds If you need help installing the fan your Hunter fan dealer can direct you to a licensed installer or electrician Gathering the Tools You will need the following tools for installing the fan e Electric drill with 9 64 bit e Standard screwdriver magnetic tip recommended e Phillips head screwdriver magnetic tip recommended e Wrench or pliers e Ladder height dependent upon installation site Checking Your Fan Parts Carefully unpack your fan to avoid damage to the fan parts Refer to the included Parts Guide Check for any shipping damage to the motor or fan blades If any parts are missing or damaged contact your Hunter dealer or call Hunter Technical Support Department at 888 830 1326 In Canada call 866 268 1936 6 Installing Multiple Fans If you are installing more than one fan keep the fan blades and blade irons if applicable in sets as they were shipped 42441 01 06 14 11 Hunter Fan Company 2 Installing the Ceiling Plate A CAUTION To avoid possible electrical shock before installing your fan Toward disconnect the power by turning off the circuit breakers to the outlet box Ceiling Peak and associated wall switch location If you cannot lock the circuit breakers in the off position secu
11. en back on The light kit will turn on at maximum brightness 10 2 Press the remote control s HIGH speed button The fan should start and reach its maximum speed Note For everyday operation leave the wall switch ON If the In warm weather use remote control will not be used for 5 days or more turn the wall downward air flow pattern switch OFF 10 3 Ceiling fans work best by blowing air downward counterclockwise blade rotation in warm weather to cool the room with a direct breeze In cold weather having the fan draw air upward clockwise blade rotation will distribute the warmer air trapped at the ceiling around the room without causing a draft 10 4 For cleaning finishes use a soft brush or lint free cloth to prevent scratching A vacuum cleaner brush nozzle can remove heavier dust Remove surface smudges or accumulated dirt and dust using a mild detergent and a slightly dampened cloth You may use an artistic agent but never abrasive cleaning agents as they will damage the finish 10 5 The blades on this fan have been treated with Hunter s Dust In cold weather use upward Armor protection making the blades less likely to attract dust air flow pattern and dirt Use a dry or slightly damp lint free cloth to clean the blades Do not use a furniture polish or any other cleaners that leave any residue as they will damage the protective Dust Armor on the blades To Change Airflow Direction Remove glass Turn switch to
12. eration e The fan blades are at least 7 feet above the floor and the ceiling is at least 8 feet high The fan blades have no obstructions to airflow such as walls or posts within 30 inches of the fan blade tips e The fan is directly below a joist or support brace that will hold the outlet box and the full weight of the fan Checklist for Existing Fan Site e a 30 From Wall or Nearest Obstruction 7 Minimum Blades to Floor 8 Minimum If you want to use an existing fan site complete the following checklist to Fan Support determine if the site is acceptable and safe for your new Hunter fan If you cannot check off every item prepare a new fan site as described on this page Fan Support System Fan attaches directly to building structure e Fan support system will hold full weight of the fan and light kit Ceiling Hole The outlet box clearance hole is directly below the joist or support brace Outlet Box e The outlet box is an UL approved octagonal 4 x 1 1 2 outlet box or as specified by the support brace manufacturer e The outlet box is secured to the joist or support brace by wood screws and washers through the inner holes of outlet box e The outer holes of the outlet box are aligned with joist or support brace e The bottom of the outlet box is recessed a minimum of 1 16 into ceiling Wiring e The electrical cable is secured to outlet box by an approved connector e Six
13. he bottom of the motor Note Some blade mounting screws are installed in the motor to secure the metal shipping ring 7 4 For each blade iron insert one blade mounting screw through the blade iron and attach loosely to the fan Insert the second blade mounting screw then securely tighten both mounting screws Steps 7 1 7 2 a Blade Iron et 1 I I i gt i i gt a l I I A Blade Mounting Screws 12 42441 01 04 19 11 Hunter Fan Company Step 7 1 Detail Use with grommet Blade Assembly va Screws Use without grommet 8 Completing Your Installation With a Light Fixture Your Hunter fan comes with an integrated light fixture assembly A WARNING Use only the light fixture supplied with this fan model 8 1 To attach the light kit top housing partially install two housing assembly screws into the light kit mounting plate 8 2 Feed the upper plug connector through the center opening of the light kit top housing 8 3 Align the keyhole slots in the housing with the housing assembly screws Light 8 4 Turn the light kit top housing counterclockwise until the housing 1P ousing assembly screws are firmly situated in the narrow ends of the keyhole slots Install the remaining screw into the housing Tighten Steps 8 1 8 3 all three screws firmly A CAUTION Make sure the light kit top housing is securely attached to the light
14. on the ceiling plate A WARNING The slots in the canopy must remain engaged while swinging the canopy for alignment Holding the canopy up with the screw holes aligned partially install two canopy screws into the holes opposite the ceiling plate tabs Partially install a canopy screw between the slots in the canopy When all the holes are properly aligned securely tighten all three canopy screws Verify that the tabs in the canopy are still in the grooves of the hanger ball Align the tabs on the trim ring opposite the grooves in the hanger ball Using both hands push the canopy trim ring up to the top of the canopy The canopy trim ring will snap and lock into place Note Should you need to remove the trim ring press firmly on opposite sides of the trim ring directly above the groove in the hanger ball The tabs will flex out releasing the canopy trim ring Step 6 3 Canopy gt Canopy Trim Canopy Screw lI 42441 01 06 14 11 Hunter Fan Company 7 Assembling the Blades Hunter fans use several styles of fan blade irons brackets that hold the blade to the fan 7 1 Install the grommets into the blades by hand 7 2 Place each blade between a blade iron and medallion Install three blade screws to attach the medallion to the blade iron Repeat for all blades 7 3 Remove the blade mounting screws and metal shipping ring from t
15. r holes in the box align with the joist or support brace 4 3 Drill pilot holes no larger than the minor diameter of the wood screws 5 64 through the inner holes of the outlet box 4 4 Attach the outlet box directly to the support brace or joist with two 8 x 1 1 2 wood screws and washers The bottom of the outlet box must be recessed a minimum of 1 16 into the ceiling Step 5 Prepare the Wiring 5 1 Make sure the circuit breakers to the fan supply line leads and associated wall switch location are turned off If you cannot lock the circuit breakers in the off position securely fasten a prominent warning device such as a tag to the service panel 5 2 Thread the fan supply line through the outlet box so that the fan supply line extends at least 6 beyond the box 5 3 Attach the fan supply line to the outlet box with an approved connector available at any hardware store or electrical supply house 5 4 Make certain the wiring meets all national and local standards and ANSI NFPA 70 You have now successfully prepared your ceiling fan site For instructions to install your ceiling fan go to your fan manual and continue with Section 2 Installing the Ceiling Plate 4 42441 01 06 14 11 Hunter Fan Company A CAUTION All wiring must be in accordance with national and local electrical codes and ANSI NFPA 70 If you are unfamiliar with wiring use a qualified electrician
16. rely fasten a prominent warning device such as a tag to the service panel 2 1 Drill two pilot holes into the wood support structure through the outermost holes in the outlet box The pilot holes should be 9 64 in diameter For Angled Ceilings Be sure to orient the ceiling plate so that the two tabs are pointing toward the ceiling peak For Angled Ceilings Be sure to orient the ceiling plate so that the two tabs 2 2 Your fan comes with four preinstalled noise isolators Check to are pointing toward the ceiling peak make sure all four isolators are in place and were not removed during shipment 2 3 Place a flat washer on each of the two 3 wood screws 2 4 Thread the supply wires from the outlet box in the ceiling through the hole in the center of the ceiling plate 2 5 Align the slotted holes in the ceiling plate with the pilot holes you drilled in the wood support structure For proper alignment use slotted holes directly across from each other Note The isolators should be flush against the ceiling 2 6 Pass the screws through the slotted holes in the ceiling plate into the pilot holes you drilled Tighten the screws into the 9 64 pilot holes do not use lubricants on the screws Do not over tighten Flat Washer 3 Wood Steps 2 3 2 6 Screw ements FEENUNUUEEEEEOUU NUN me 7 42441 01 06 14 11 Hunter Fan Company 3 Assembling and Hanging the Fan A
17. sing 8 9 Turn the glass bowl clockwise until it locks into place 42441 01 06 14 11 Hunter Fan Company 15 gt Steps 8 8 8 9 9 1 9 2 9 3 9 4 9 5 9 6 9 Operating the Remote Control and Mounting the Holder The remote transmitter has individual buttons for turning the fan off and on and controlling the light and fan speed Fanspeed For best operation start the fan by pressing high then select High your desired speed Fan Speed The light button turns the light on to full brightness Push the Low light button again to turn off the light Press the OFF button to turn the fan off When necessary replace the battery with a 9 volt battery You can mount the remote holder to any toggle switch plate with the screws already in the switch plate Or you can simply mount the remote holder on the wall Steps 9 1 9 4 Step 9 6 Step 9 5 16 42441 01 06 14 11 Hunter Fan Company Fan Speed Medium Fan Off Fan Light 10 Operating and Cleaning Your Ceiling Fan 10 1 Restore power at the main electrical panel and turn on the wall switch The light kit should turn ON To dim the light hold the light button down until you reach your desired brightness Push the light button again to turn off the light Note To turn on the light without the remote turn off the wall switch for 5 seconds th
18. the opposite position Replace glass 17 42441 01 06 14 11 Hunter Fan Company 11 Troubleshooting Problem Nothing happens fan does not move 1 Turn power on replace fuse or reset breaker 2 Loosen canopy check all connections according to the wiring the fan section 3 Check the plug connection in the switch housing 4 Push motor reversing switch firmly left or right to ensure that the switch is engaged 5 Pull the pull chain to ensure it is on 6 Remove the shipping bumpers Problem Noisy operation 1 Tighten the blade assembly screws and blade iron armature screws until snug 2 Check to see if the blade is cracked If so replace all the blades Problem Excessive wobbling 1 If your fan wobbles when operating use the enclosed balancing kit and instructions to balance the fan 2 Tighten all blade iron screws 3 Turn power off support fan very carefully and check that the hanger ball is properly seated Problem Lights shut off suddenly but fan is still operating 1 Check to make sure the wattage and type of the light bulbs that are installed meet the specifications on the light socket 2 Turn the power to the fan off at the wall switch Wait 5 minutes then resume power to the fan Problem CFL bulbs flicker when controlled by a dimming remote or wall control 1 CFL light bulbs are not usually made for dimming Replace the CFL bulbs with dimmable light bulbs or install the fan in a
19. ve the receiver transmitter for each fan set to a different code so that the operation of one fan does not affect the operation of the other fans The DIP switches for the receiver are located on the flat surface of the receiver The DIP switches for the transmitter are in the battery compartment 4 1 IMPORTANT Before you change the DIP switch settings make sure the battery is not connected to the transmitter Change the position of the DIP switches in the remote transmitter and the receiver Make sure that the DIP switches match in the remote receiver and transmitter If they don t match the transmitter will not function Transmitter DIP switches 4 2 There is a toggle switch beside the DIP switches on the transmitter Move the toggle switch toward the side that reads CFL if you are going to operate the fan with CFL bulbs Move the switch to the INC side if you are going to use incandescent bulbs Example DIP Switch Settings 4 3 Install the included 9 volt battery into the transmitter Receiver 1 Receiver 2 A CAUTION The remote control device complies with part 15 of the FCC rules Changes or modifications not expressly approved by Hunter Fan Company could void your authority to operate this equipment ee l l ae DIP Switches DIP Switches Operation is subject to the following two conditions Set to 0111 Set to 0100 1 This device may not cause harmful interference 2 This device must accept any interference received
Download Pdf Manuals
Related Search