Philips CarStudio Car audio system CE138
Contents
1. Unlock the front panel For wma and mp3 tracks press to select the previous folder Press and hold to access the system menu Press to select a tuner band Return to the previous menu For iPod iPhone press repeatedly to select a control mode control play on he iPod iPhone or on this system LCD screen Zo Connect to a USB storage device Connect to a compatible iPod iPhone MP3 LINK e Connect to the audio output socket usually the headphone socket of an external device PIG e Start pause or resume the play of tracks e In radio mode press to select the preset radio station of No 6 DID SHUF 4 3 REP w2 n radio mode press and hold to store he current radio station at channel o 6 n radio mode press to select the preset radio station of No 5 n radio mode press and hold to store he current radio station at channel o 5 n radio mode press to select the preset radio station of No 4 n radio mode press and hold to store he current radio station at channel o 4 For wma and mp3 tracks press repeatedly to select a play mode play all tracks randomly SHU ALL play racks in the current folder or album randomly SHU FLD SHU ALBM or play all tracks in the storage device in sequence SHU OFF n radio mode press to select the preset radio station of No 3 n radio mode press and hold to store he2. unsafe operation odification of the product could result in hazardous radiation of EMC or other The device is designed for negative ground earth 12V DC operation only To ensure safe driving adjust the volume to a safe and comfortable level fire When you need Use only the supplied consult a professional for a safe and secure mproper fuses can cause damage or o change the fuse mounting hardware installation To avoid short circuits do not expose the device to rain or water The device shall not be exposed to dripping or splashing Do not place any sources of danger on he device e g liquid filled objects lighted candles Never insert objects into the ventilation slots or other openings on the device Clean the device with soft damp cloth Never use substances such as alcohol chemicals or household cleaners on the device Risk of swallowing batteries A coin type battery is bundled which can be swallowed Keep the battery out of reach of children at all times EN 2 Your car audio system Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your product at www philips com welcome Introduction With this system you can e enjoy audio from a USB storage device SD SDHC card iPod iPhone and external player e charge your iPod iPhone and e listen to radio stations You can enr
3. These instructions are for a typical installation However if your car has different requirements make the adjustment accordingly If you have any question regarding installation kits consult your local retailer e This system is designed for negative ground earth 12V DC operation only e Always install this system in the car dashboard Other locations can be dangerous as the rear of the system heats up during use e To avoid short circuit before you connect make sure that the ignition is off e Make sure that you connect the yellow and red power supply leads after all other leads are connected e Make sure that all loose leads are insulated with electrical tape e Make sure that the leads do not get caught under screws iron parts that will move e g seat rail e Make sure that all ground earth leads are run to a common ground earth point e Use only the supplied mounting hardware for a safe and secure installation e Improper fuses can cause damage or fire When you need to change the fuse consult a professional e When you connect other devices to this system make sure that the rating of the car circuit is higher than the total fuse value of all the connected devices e Never connect speaker wires to the metal body or chassis of the car e Never connect speaker wires with stripes to one another ISO male connectors Connect to a Green strip black Rear l
4. Russia e AREA USA United States e AREA LATIN Latin America e AREA JAPAN Japan 3 Rotate amp to select a region Select a tuner sensitivity To search for radio stations with strong signals only or more radio stations you can change the tuner sensitivity 1 Press and hold satu to access the system menu 2 Press wau ze repeatedly until LOC ON or LOC OFF is displayed 3 Rotate amp to select a setting e LOC ON Search for radio stations with strong signals only e LOC OFF Search for radio stations with strong and weak signals 12 EN Search for a radio station Search for a radio station automatically Press kK or PP to search for the previous or next radio station with strong signals Search for a radio station manually 1 Press and hold Ke or PP until M blinks 2 Press Ke or DPI repeatedly until the target frequency is displayed Store radio stations in memory Note You can store a maximum of six stations in each band Store radio stations automatically 1 Switch the source to RADIO 2 Press BAND Sen or ze repeatedly to select a band 3 Press and hold AS SOURCE until STORE is displayed L gt After the search is complete the first stored radio station is broadcast automatically e To select a stored radio station press 1 JJ wl 2 3REP SHUF 4 5 or PIG Store radio stations manually 1 Press BAND sans Or zone repeatedly to s
5. Switch tracks connected and recognized the system During play you can switch tracks or folders switches the source to iPod USB quickly automatically 3 Ifthe play does not start press PI 6 Switch tracks directly 1 Press 1 JJ to access the track list L gt The file name of current track scrolls 2 Rotate amp to toggle through tracks 3 Press amp to play the selected track Switch folders for a track 1 Press till 2 to access the folder list L gt The name of current folder scrolls 2 Rotate amp to toggle through folders 3 Press amp to select the folder L gt The system starts playing the first track under the folder EN 15 7 Play from an iPod iPhone Note e During play no audio signals are transferred through the headphone socket of your iPod iPhone Compatible iPod iPhone models This car audio system supports the following iPod and iPhone models e iPhone 45S iPhone 4 iPhone 3GS and iPhone 3G e iPod touch 2nd 3rd and 4th generations e iPod classic e iPod nano 3rd 4th 5th and 6th generations Connect your iPod iPhone Connect an Apple 30 pin USB cable to e the USB socket on the front panel of this system and e your iPod iPhone L gt iPod USB scrolls L gt The system starts playing tracks that are stored on your iPod iPhone 16 EN Note e Before you disconnect the iPod iPhone
6. the electric connection 2 Remove the damaged fuse from the rear panel 20 EN 3 Insert a new fuse with the same specifications 15 A K USE 15A Note e Ifthe fuse gets damaged immediately after it is replaced an internal malfunction may occur In such case consult your Philips retailer 11 Product Information Note e Specifications are subject to change without prior notice General Power supply 12V DC 11V 16V negative ground Fuse 15A Suitable speaker 4 80 impedance Maximum power 50W x 4 channels output Continuous power 22W x 4 RMS output 4 Q 10 T H D Pre Amp output 25V voltage Aux in level gt 500 mV Radio Frequency range FM 87 5 108 0 MHz 100kHz per step in auto search and 50kHz per step in manual search Usable sensitivity FM S N 20 dB 8 uV Frequency range 522 1620 KHz 9 kHz AM MW 530 1710 kHz 10 kHz Usable sensitivity 30 uV AM MW S N 20 dB EN 21 Check whether the iPod iPhone is 1 2 Tro u b es hooti ng compatible with this system Check whether the iPod iPhone battery is nearly empty Connect it to this system for Warning charging first e Never remove the casing of this product Display show
7. Always there to help you Register your product and get support at www philips com welcome a Question Contact CE138 Philips c Med EN Mit JIU User manual PHILIPS Contents 1 Safety 2 2 Your car audio system 3 Introduction 3 What s in the box 3 Overview of the system 4 Overview of the remote control 6 3 Install the car audio system 7 Connect wires 7 Mount into the dashboard 8 Attach the front panel 9 4 Get started 10 For the first time use 10 Set the time format 10 Set the clock 10 Select a source 10 Select a listening zone 10 Mute the button beep 11 Install replace the remote control battery 11 5 Listen to radio 12 Select a tuner region 12 Select a tuner sensitivity 12 Search for a radio station 12 Store radio stations in memory 12 6 Play from a storage device 14 Control play 14 Switch tracks 14 7 Play from an iPod iPhone 16 Compatible iPod iPhone models 16 Connect your iPod iPhone 16 Control play 16 Charge your iPod iPhone 17 8 Listen to an external player 18 9 Adjust sound 19 10 Additional information 20 Reset the system 20 Replace the fuse 20 11 Product Information Pal 12 Troubleshooting 22 13 Notice 23 Care of the environment 23 Trademark notice 23 Copyright 23 14 Glossary 24 EN 1 Safety Read and understand all instructions before you use this device If damage is caused by failure to follow instructions the warranty does not apply
8. Consumer Lifestyle may void the user s authority to operate the equipment Care of the environment ab Your product is designed and manufactured with high quality materials and components which can be recycled and reused Never dispose of your product with other household waste Please inform yourself about the local rules on the separate collection of electrical and electronic products and batteries The correct disposal of these products helps prevent potentially negative consequences on the environment and human health Your product contains batteries which cannot be disposed of with normal household waste Please inform yourself about the local rules on separate collection of batteries The correct disposal of batteries helps prevent potentially negative consequences on the environment and human health Please visit www recycle philips com for additional information on a recycling center in your area Environmental information All unnecessary packaging has been omitted We have tried to make the packaging easy to separate into three materials cardboard box polystyrene foam buffer and polyethylene bags protective foam sheet Your system consists of materials which can be recycled and reused if disassembled by a specialized company Please observe the local regulations regarding the disposal of packaging materials exhausted batteries and old equipment Trademark notice Ay Plays a Windows
9. Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and or other countries Made for 3iPod QiPhone Made for iPod and Made for iPhone mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively and has been certified by the developer to meet Apple performance standards Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards Please note that the use of this accessory with iPod or iPhone may affect wireless performance iPod and iPhone are trademarks of Apple Inc registered in the U S and other countries Other trademarks and trade names are those of their respective owners Copyright 2012 Koninklijke Philips Electronics N V Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly EN 23 14 Glossary M MP3 A file format with a sound data compression system MP3 is the abbreviation of Motion Picture Experts Group 1 or MPEG 1 Audio Layer 3 S SD Secure Digital A type of memory card with a flash memory SDHC Secure Digital High Capacity SDHC is a type of flash memory card ba
10. current radio station at channel o 3 For wma and mp3 tracks press repeatedly to select a repeat mode n radio mode press to select the preset radio station of No 2 n radio mode press and hold to store he current radio station at channel o 2 For wma and mp3 tracks on a storage device press to access the folder list n radio mode press to select the preset radio station of No 1 n radio mode press and hold to store he current radio station at channel 0 1 For wma and mp3 tracks on a storage device press to access the track list Press to access the music menu of an iPod iPhone 3 DSP D AS EQ AUDIO v ZONE l lt SOUND DBB O Press repeatedly to display available information about the current track Press and hold to display the set clock SOURCE Press repeatedly to select a source n radio mode press and hold to activate the automatic search of radio stations Press repeatedly to select a preset sound equalizer Press and hold to activate the setup of bass treble balance and fader Press to turn on the system Press and hold to turn off the system Press to mute the speakers or release hem from mute status Press to confirm an option Rotate to switch between menu options Rotate to adjust the volume level For wma and mp3 tracks on a storage device press to select the next folder Press and hold to activate the selec
11. ect a listening zone Mute the button beep The beep sound of buttons is enabled by default 1 Press and hold fu to access the system menu 2 Press wu ze repeatedly until BEEP ON or BEEP OFF is displayed BEEP ON Enable the beep sound of buttons BEEP OFF Mute the beep sound of buttons 3 Rotate O amp to change the setting Install replace the remote control battery EE Caution e Risk of explosion Keep batteries away from heat sunshine or fire Never discard any battery in fire e Risk of product damage When the remote control is not to be used for a long period remove the battery e Perchlorate Material special handling may apply See www dtsc ca gov hazardouswaste perchlorate For the first time use Remove the protective tab to activate the remote control battery To replace the remote control battery 1 Open the battery compartment 2 Insert one CR2025 battery with correct polarity as indicated 3 Close the bat ery compartment EN CR2025 SD 11 5 Listen to radio Select a tuner region You can select a radio region that matches your location 1 In radio mode press and hold mu tO access the system menu 2 Press wit 20 repeatedly until one of the following options is displayed e AREA EUROPE Western Europe AREAASIA Asia Pacific e AREA MID EAST Middle East e AREA AUST Australia e AREA RUSSIA
12. eft speaker edged green strip b White strip black Front left speaker edged white strip c Gray strip black Front right speaker edged gray strip d Purple strip black Rear right speaker edged purple strip e Red strip gnition key 12V DC when ON ACC f Blue strip Motor electric antenna relay control lead g White edged blue Amplifier relay strip control lead h Black strip Ground i Yellow strip To the 12V car battery which is energized at all times EN 7 2 Connect the antenna and amplifier as illustrated if applicable Sockets on rear External sockets or panel connectors 1 For ISO male As indicated above connectors 2 REARL Rear left speaker 3 REARR Rear right speaker 4 ANTENNA Antenna Tip e The pin arrangement for the ISO connectors depends on the type of your vehicle To avoid damage to the unit connect properly Mount into the dashboard e Ifthe car does not have an on board drive or navigation computer disconnect the negative terminal of the car battery e If the car battery is not disconnected to avoid short circuit make sure that the bare wires do not touch each other 1 Make sure that the car dashboard opening is within these measurements op E E LO 2 Remove the mounting sleeve with the supplied disassembly tools 3 Install the sleeve into the dashboard and bend the tabs outward
13. elect a tuner band 2 Tune to the radio station that you want to store 3 Press and hold 1 JJ wl 2 3REP SHUF 4 5 or PII G to store the radio station at the selected channel e To select a stored radio station press 1 J wl 2 3 REP SHUF 4 5 or PUG EN 13 6 Play froma Control play storage device Button Function A vy Press repeatedly to select a MENU ZONE folder Pil 6 Pause or resume play lda Press to play the previous or gt Pi next track Iaa Press and hold to rewind a track PP or search forward fast DISP Press repeatedly to display available information about the current track 3 REP Press repeatedly to select a repeat mode e REP ONE repeat the cur rent track e RPT FLD repeat all tracks in the current folder or e RPT ALL repeat all tracks in the storage device SHUF 4 Press repeatedly to select a play mode e SHU ALL play all tracks randomly 1 Connect a compatible USB storage device SHU FLD play tracks in the or SD SDHC card current folder randomly or Foran SD SDHC card detach the e SHU OFF play all tracks front panel first insert the card into in the storage device in the card slot and then attach the front sequence panel 2 Switch the source to iPod USB or SD SDHC e When a USB storage device is
14. example MP3 player 1 Switch the source to MP3 LINK 2 Connect an MP3 link cable to e the MP3 LINK socket on the system and e the audio output socket usually the headphone socket on the external player 3 Play the external player 9 Adjust sound The following operations are applicable to all supported media Button Function amp Rotate to increase or decrease the volume level amp Press to mute the speakers or release hem from mute status MAX Press to enable or disable the SOUND P DBB maximum volume max Press and hold to enable or disable SOUND DBB he Dynamic Bass Boost DBB effect EQ Press repeatedly to select a sound AUDIO equalizer EQ T Press and hold to activate the setup AUDIO of customized sound equalizer 2 Press repeatedly to select an option BAS bass TRE treble BAL balance or FAD fader 3 Rotate K to adjust the setting EN 19 10 Additional information Reset the system If the system works abnormally reset the system to factory default settings 1 Detach the front panel 2 Press the RESET button with the tip of a ball point pen or toothpick L gt All settings are reset to factory default Replace the fuse If there is no power check the fuse and replace it if it is damaged 1 Check
15. ich sound output with these sound effects Dynamic bass boost DBB e Digital sound control DSC Playable media e USB storage device e Compatibility USB 2 0 USB 1 1 e Class support MSC Mass Storage Class aximum capacity 32 GB e SD SDHC card e aximum capacity 32 GB e Files e File system FAT16 FAT32 aximum number of folders 99 e aximum number of tracks files 999 aximum level of directory 8 mp3 files Sampling frequencies 32 kHz 44 1 kHz 48 kHz Bitrates 8 320 kbps and variable bitrates e wma files Versions V4 V7 V8 V9 L1 and L2 Sampling frequencies 44 1 kHz 48 kHz Bitrates 64 192 kbps and variable bitrates ID3 tag V2 0 or later e Unsupported files AAC WAV and PCM files DRM protected WMA files way m4a m4p mp4 and aac WMA files in lossless format What s in the box Check and identify the contents of the package Main unit with a sleeve Carrying case with front panel included Trim plate Disassembly tool X 2 ISO male connector X 2 Remote control QOOOQODOO0SO User manual EN 3 Overview of the system PHILIPS CarStudio AUDIO SYSTEM TUNER CEI38 c l Tad J m T iPod ILI ace im IR sti iPhone AS ore ose 12 m2 3R surg 5 6 MP3 LINK OQ
16. off Set the time format 1 Press and hold satu to access the system menu 2 Press wau 2K repeatedly until CLK 24H or CLK 12H is displayed 3 Rotate amp to select CLK 24H or CLK 12H e CLK 24H 24 hour time format e CLK 12H 12 hour time format Set the clock Press and hold wenu to access the system menu 2 Press wu ze repeatedly until CLK is displayed with time digits blinking 3 Rotate amp anti clockwise to set the hour 4 Rotate amp clockwise to set the minute Display the clock Press and hold DISP until CLK and the set clock are displayed e To exit the clock display press any button or rotate amp Select a source Press AS SOURCE repeatedly to select a source e RADIO Listen to FM AM radio MP3 LINK Listen to the audio input through the MP3 LINK socket iPod USB When a USB storage device or compatible iPod iPhone is connected and recognized you can select this source to play audio files that are stored on it SD SDHC When an SD SDHC card is inserted and recognized you can select this source to play audio files that are stored on it Select a listening zone 1 Press and hold ze until one of the following options is displayed e ALL For all passengers FRONT L For the front left seat only FRONT R For the front right seat only FRONT For front passengers only 2 Press wu ze repeatedly to sel
17. s ERR 12 Data error Check the USB storage device To keep the warranty valid never try to repair or SD SDHC card the product yourself If you encounter problems when using this product check the following points before requesting service If the problem remains unsolved go to the Philips Web page www philips com support When you contact Philips make sure that the product is nearby and the model number and serial number are available No power or no sound e The power supply from car battery is cut off or the car battery runs out of energy Power the system with car battery Car engine is not on Turn the car engine on Cable is not correctly connected Check connections e The fuse is burnt Replace the fuse Volume is too low Adjust volume e If the above solutions cannot help press the RESET button e Make sure that the current track is in a compatible format Noise in broadcasts Signals are too weak Select other stations with stronger signals Check the connection of the car antenna Change the broadcast setting from stereo to mono Preset stations are erased e Battery cable is not correctly connected Connect the battery cable to the terminal that is always live Cannot switch the source to iPod iPhone Check whether the iPod iPhone is securely connected 22 EN 13 Notice Any changes or modifications made to this device that are not expressly approved by Philips
18. sed on the SDA 2 00 specification The SDA 2 00 specification enables SD cards to reach higher capacities from 4GB to 32GB and growing W WMA Windows Media Audio An audio format owned by Microsoft is a part of Microsoft Windows Media technology Includes Microsoft Digital Rights Management tools Windows Media Video encoding technology and Windows Media Audio encoding technology 24 EN PHILIPS Specifications are subject to change without notice 2012 Koninklijke Philips Electronics N V All rights reserved CE138_94_UM_V2 0
19. switch the system to another source Control play 9 Press repeatedly to select a control 0 mode control play on your iPod iPhone or on the system PUG Press to pause or resume play lda Press to play the previous or next gt Pi rack laa Press and hold to rewind a track or eel search forward fast DISp Press repeatedly to display available information about the current track 3 REP Press repeatedly to select a repeat mode e REP ONE repeat the current track or e REP ALL repeat all tracks Press repeatedly to select a play mode e SHU ALL play all tracks ran domly e SHU ALBM play tracks in the current album randomly or e SHU OFF play all tracks in the iPod iPhone library in sequence SHUF 4 Search for a track After accessing the iPod iPhone menu you can select a specific track quickly 1 Press 1 JI to access the iPod iPhone menu L gt PLAYLIST scrolls 2 Rotate amp to select a category 3 Press amp to access the list of tracks under the category L gt The file name of the first track scrolls 4 Rotate amp to select a track L gt The file name of current track scrolls 5 Press O amp to start play Charge your iPod iPhone Once the iPod iPhone is docked and recognized the charging starts EN 17 8 Listen to an external player You can use the system to amplify the audio input from an external player for
20. tion of listening zones Press to select a tuner band lt PPri Tune to a radio station Press to skip to the previous next rack Press and hold to rewind a track or search fast forward Press to enable or disable the maximum volume EN 5 a BAND Press repeatedly to select a tuner band Q1 Slot Q2 RES Press and hold to enable or disable he DBB dynamic bass boost sound effect for SD SDHC card nsert an SD SDHC card ET Press to reboot the system Overview of the remote control PHILIPS CarStudio 4 VOL VOL e Adjust the volume Q AIV Select a tuner band e Toggle through menus Select an MP3 WMA folder G Ke DP e Tune to a radio station Skip to the previous or next track e Press and hold to rewind a track or search forward fast 4 SOURCE e Select an source EQ e Select a preset sound equalizer EQ OFF O amp e Turn the system on or off e Mute the speakers or release them from mute status 3 Install the car audio system Caution e Use the controls only as stated in this user manual Always follow the instructions in this chapter in sequence Connect wires Note e Make sure that all loose leads are insulated with electrical tape Consult a professional to connect wires as instructed below Check the car s wiring carefully and connect them to the the supplied ISO male connectors
21. to fix the sleeve 4 Slide the unit into the sleeve until you hear a click 6 Reconnect the negative terminal of the car battery Attach the front panel d Insert the notch on the front panel to the chassis on the main unit 2 Press the left end of the front panel inwards until it is securely locked with a click 000000000090090 00000000000090 PHILIPS Detach the front panel Note e Before you insert an SD SDHC card or reset the system detach the front panel Before you detach the front panel make sure that the system is turned off 1 Press uA to release the front panel 2 Pull the front panel outwards to remove it EN 9 4 Get started For the first time use 1 Press amp to turn on the system tL PHILIPS is displayed and then SELECT OPERATING REGION select a radio region scrolls 2 When one of the following options is displayed rotate K to select a radio region that matches your location e AREA EUROPE Western Europe e AREAASIA Asia Pacific e AREA MID EAST Middle East e AREA AUST Australia e AREA RUSSIA Russia AREA USA United States e AREA LATIN Latin America AREA JAPAN Japan 3 Press amp to confirm L gt The system switches to radio mode automatically e To turn off the system press and hold amp until the screen backlight is
Download Pdf Manuals
Related Search