DYMO LabelManager 280
Contents
1. 0 cee ees 17 oOo 4 A WU N Be LCD display Cutter Italics Underline Vertical text Print Copies Figure 1 LabelManager 280 Label Maker 9 Back 10 Save Open 11 Numeric keys 12 Symbols 13 Backspace 14 Return 15 Space bar 16 Caps 17 Accented characters 18 Navigation 19 OK 20 New label Clear 21 Menu 22 On Off 23 Textsize 24 Bold About Your New Label Maker With the DYMO LabelM anager 280 electronic label maker you can create a wide variety of high quality self adhesive labels You can choose to print your labels in several different fonts text sizes and text styles The label maker uses DYMO D1 label cassettes in widths of 6 mm 1 4 9 mm 3 8 or 12 mm 1 2 These label cassettes are available in a wide range of colors Visit www dymo com for information on obtaining labels and accessories for your label maker Product Registration Visit www dymo com register to register your label maker online During the registration process you will need the serial number which is located inside the back cover of the label maker Register your label maker to receive these benefits An additional one year of warranty Notification of software upgrades by emall Special offers and new product announcements Getting Started Follow the steps in this section to print your first label Connecting the Power The label maker is powered by a rechargeable lithium ion Li ion2. EAA 108 amp To change the text alignment 1 Press fhe select LAR I and then press OK 2 Select and then press OK 3 Press lt or gt to Select the text alignment and then press OK Creating Two Line Labels You can print a maximum of two lines on a label Only one line of text can be printed on 6 mm 1 4 labels When printing a two line vertical label the second line of text will print to the right side of the first line To create a two line label 1 Type the text for the first line and press 4 2 Type the text for the second line 3 Press 2 to print Using Clip Art Symbols and Special Characters Clip art symbols punctuation and other special characters can be added to your labels Adding Symbols The label maker supports the extended symbol set shown below i 1 ne To insert a symbol 1 Press 4 select l amp I and then press OK Select Symbols and then press OK Press the navigation keys to select a symbol Press OK to add the symbol to your label 2 3 4 Y You can quickly add a symbol by pressing the key Adding Clip Art Adding Accented Characters The label maker includes the clip art shown below The label maker supports the extended Latin character set You can add accented characters in two ways Press and then the alpha character Press and hold the aloha character After pressing the alpha character all of the available
3. User Guide LabelManager 280 Copyright O 2012 Newell Rubbermaid LLC All rights reserved No part of this document or the software may be reproduced or transmitted in any form or by any means or translated into another language without the prior written consent of Newell Rubbermaid LLC Trademarks DYMO DYMO Label and LabelManager are registered marks in the US and other countries All other trademarks are the property of their respective holders Contents About Your New Label Maker ee RR La 5 PFO CIC EtG lh ir did ei cia tae caia Ar 5 Genting Started yerri dna R Dia E ki bi rd BP we BAS OG VEER LOWE RE RAEE 5 COMBO ssk r eta te ae R r A a emits 5 the Battery Pases dias G SVG edits ais idos 5 0 ld ea J 5 ReGMarging tie Batey PACK src cas ti d a sa is Rk REMOVING Ne Balon era ba a ak ds RR wn a a AS AR kola a a ERES AA RASTAS 5 6 0 7 6 Using the Label Maker for the First Time a 6 Getting to Know the Label Maker E A 6 BO O ae acne ee eA 7 aA 7 00 0 0204 AT baw wae 02 NaVIG GON KEYS n dare Rak 0 0 ee hate Oe ee aes Sue Gera ce 0 a a a ARA 7 A A 7 tk CMe AO ete Gee eee See Avie ke A Bae Bees 0 0 Cu eee Pe 5 Caps MOGe idad ds eee eee Lee tole ied ee idas 7 New Lapele 6 uote ee ee ee ee ee eee eee ee ee ere
4. Tene Q gt 6 insert clip art Press q select 16 and then press OK 1 Menu l gt Ge P and minutes 2 Select Clip AN ane then press OK 5 Press OK and then press _6 twice to return to the 3 Press the navigation keys to select an Image edit area 4 Press OK to add the image to your label To insert the date and time C 1 Press merc Select Il amp and then press OK 2 Select Date and Time and then press OK The date and time are inserted on the label BR W N 10 Using Auto Numbering You can print a series of up to 10 labels at a time using auto numbering You can add numeric 0 1 2 9 uppercase A B C Z or lowercase a b c z auto numbering to your label Optionally you can add text before and after the auto numbering To auto number your labels 1 Press menu select 165 and then press OK 2 Select Auto numbering and then press OK 3 Selectthe auto numbering type to use and then press OK 4 Use the navigation keys to select a start and end value and then press OK Auto numbering is added to your label and the number of labels in the series is shown on the LCD display L X _ Deleting Auto Numbering Auto numbering is entered on the label as one character To delete auto numbering 1 Place the cursor at the end of the auto numbering text on the display 2 Press 4 Changing the Settings Several options are available for
5. battery pack To save power the label maker automatically turns off after two minutes of inactivity Remove the battery pack if the label maker will not be used for a long period of time Inserting the Battery Pack The battery pack included with your label maker comes partially charged For best performance fully charge the battery as soon as possible A Make sure the charging adapter is disconnected before handling the Li ion battery pack To insert the battery pack 1 Slide the battery compartment cover away from the label maker See Figure 2 Figure 2 2 Insert the battery pack into the battery compartment 3 Replace the battery compartment cover A Make sure to read the Li ion Safety Precautions found on page 17 Recharging the Battery Pack A charging adapter is included with your label maker for recharging the battery pack Charging the battery pack will take approximately three hours however after charging for about 10 minutes the label maker can be used to print labels The charging adapter is only used for recharging the battery pack the charging adapter cannot be used to power the label maker To recharge the battery pack 1 Plug the charging adapter into the power connector on the top of the label maker 2 Plug the other end of the charging adapter into a power outlet See Figure 3 Figure 3 A Make sure to read the Li ion Safety Precautions found on page 17 Removing the Battery Re
6. variations of that letter are displayed For example if you press and hold the letter a you will see a and so on through all the variations available 3 12 DIAR X E To add accented characters 1 Press and hold an alpha character The accent variations for that character are displayed 2 Press lt or gt to select the character you want and then press OK Inserting the Date and Time You can insert the current date and time on your label The date and time format depends on the format you have selected in the label maker settings To set the date and time format 1 Press Reza select Z and then press OK 2 Select 1 and then press OK 3 Select Notation and then press OK 4 Select the date or date and time format to use and then press OK To set the date 1 Press e select Z and then press OK 2 Select 4 1 and then press OK 3 Select Set date and then press OK 4 Use the navigation keys to select the current day month and year 5 Press OK and then press _9 twice to return to the edit area To set the time 1 Press rel select 5 and then press OK Select H xv and then press OK Select Set time and then press OK Use the navigation keys to select the current hour Deo XK 8 SAN mi Xe 3 en A r gt lt dil D Or amp ree 0206 QER SOB 6 2 0 T B 2 lt 2 6
7. 2 Press or y to select a label and then press OK The selected label is opened in the edit area Inserting Saved Text You can insert the text of a saved label into the current label Only the saved text is inserted not the formatting To insert saved text 1 Position the cursor at the location in the label where you want to insert the text 2 Press select E and then press OK 3 Press A or y to select Saved text and then press OK The first memory location Is displayed 4 Press or Y to select the text to insert and then press OK The text is inserted in the current label Caring for Your Label Maker Your label maker is designed to give you long and trouble free service while requiring very little maintenance Clean your label maker from time to time to keep it working properly Clean the cutter blade each time you replace the label cassette To clean the cutter blade 1 Remove the label cassette 2 Press and hold the cutter button to expose the cutter blade See Figure 7 Press and hold Cutter blade Figure 7 3 Usea cotton swab and alcohol to clean both sides of the blade A The cutter blade is extremely sharp Use caution when cleaning To clean the print head 1 Remove the label cassette 2 Remove the cleaning tool from Inside the label compartment cover See Figure 8 3 Gently wipe the padded side of the tool across the print head See Figure 8 Figure 8 12 Using
8. OK 3 Press lt or gt to select 3 and then press OK Creating Vertical Labels You can print text with the text oriented so that you can read the label vertically To create a vertical label 1 Press mU 2 Enter text 3 Press 2 to print The underline style will not print on a vertical label Creating Fixed Length Labels Normally the length of the label is automatically determined by the length of the text However you can choose to set the length of the label for a specific application When you choose a fixed label length the size of the label text is automatically adjusted to fit the label If the text Cannot be adjusted to fit within the fixed label length a message is displayed and you are prompted to print a variable length label You can choose a fixed length label between 40 mm 1 5 and 400 mm 15 long To set a fixed length 1 Press Mann j select E T I and then press OK 2 Select fL and then press OK 3 Press lt or gt to Select Fixed ae Coa ee 4 Press or to select the label length or use the numeric keys to enter the label length 5 Press OK The fixed length setting remains on until you change back to variable length Aligning the Text You can align the text to print left or right justified on the label The default alignment is centered Text alignment settings are only valid for fixed length labels Variable length labels are always center aligned
9. the Label Maker with Your Computer The label maker can be used as a standalone label printer or you can print labels directly from your computer using the latest version of DYMO Label software Installing DYMO Label Software Do not connect the label maker to your computer until prompted by the software installer To install the software on a Windows system 1 Download the latest version of DYMO Label software from the Support section of the DYMO Web site at www dymo com 2 Close all open Microsoft Office applications 3 Double click the Installer icon After a few seconds the installation screen appears 4 Click Install and follow the instructions in the installer To install the software on a Mac OS system 1 Download the latest version of DYMO Label software from the Support section of the DYMO Web site at www dymo com 2 Double click the Installer icon and follow the on screen instructions 15 Connecting the Label Maker to your Computer The label maker connects to your computer using the USB connection located on the top of the label maker Do not connect the label maker to your computer until prompted by the software installer Figure 9 To connect the label maker to your computer 1 Plug the USB cable into the USB port on the top of the label maker See Figure 9 2 Plug the other end of the USB cable into an available USB port on y
10. the current text size and then press OK 3 Press lt or gt to Select the text size and then press OK Y You can also quickly change the text size using the text size key aAA Changing the Text Style You can choose from six text styles Normal AaBb Bold AaBb Italic AaBb Underline AaBb anos e MB E it B a Ve rtic al x N o Outline AaBb Shadow AaBb To change the text style 1 Press Par select ETA and then press OK 2 Select BI FL and then press OK 3 Press A or y to select the text style and then press OK Y You can also quickly apply a text style using the formatting keys B I or U Some text styles can be combined Use the formatting keys to combine styles When using underline on multi line labels each line is underlined Adding Borders You can highlight the text by adding a border style sa 98 118 ABC 3 ABC 123 ABC 123 SABC 123 ABC 123 ABC 123 vABC 1235 To add a border 1 Press onal select ZAE and then press OK 2 Select C and then press OK 3 Press A or Vto select the border style and then press OK When using borders on two line labels both lines are enclosed in one border Using Mirror Text The mirror format allows you to print text which reads from right to left as you would see the text in a mirror To apply mirror text 1 Press Pai select ETA and then press OK 2 Select oda and then press
11. 0 Bo a ee Doe ew dad 11 2 2 Changing he Settings te a ee 0 11 CHANGING me Language 0 tia iee aae a sa a a RA RRR E os 11 3 S a a saa Sena ne Lapel Widi Seting the Y OSO Measure 154 AA SAA ATA SEA AA ASA A AA 11 AR A A AAN ANO 11 0 Preview ING OU Laba Layvott as da Hja A ens 11 ies 11 0 0 AUN MORDE bD obio ana ra ra aaa aa ra ra a aa aa ra r a r R a r G 11 Using the Label Maker Memory AA R ere S ete eee 11 SVN 77 a a a OPENING Saved LAD EIS 12 OO 12 Tol ous mums Olaus A eg eh 20 dad Caring Tor Your Label Maker a4 havas b d b ku A a A A AAA ak V b 12 sss nasar ana ra aa ra a a a ra 13 Using the Label Maker with Your Computer kak DANA a l 13 ic caidos r S KT S a INStaIING DYMO GOES OW Connecting the Label Maker to your Computer 11111sss sissa anna akan aaa a aaa aaa aaa aaa aa naan 13 14 A ADA ARAS a Rr A USING DYMO Label SOnWale aint sk a s Vela Viewing the Label Maker Status 0 0 00 0 4 0 6 14 oe See ea eed Re R dis oe eA AE A 15 Totes ODIN care tin Se es Bs 056 908 ADA AAA 16 Documentation Feedback tra R Ge a al Ss dion ON iss e Ae Ba Baw AR Sree ae ees 0 ee ee 16 EnNVIFon mental Safety Precautions for Lithium lon Rechargeable Battery Pack
12. Please keep in mind that this email address is only for documentation feedback If you have a technical question please contact Customer Support Environmental Information The equipment that you have bought requires the extraction and use of natural resources for its production It may contain Substances that are hazardous to health and the environment In order to avoid the dissemination of those substances in our environment and to diminish the pressure on natural resources we encourage you to use the appropriate take back systems These systems will reuse or recycle most of the materials of your end of life equipment in an environmentally sound way The crossed bin symbol marked on your device indicates you should use these systems A If you need more information on the collection reuse and recycling of this product please contact your local or regional waste administration You can also contact DYMO for more information on the environmental performance of our products 16 Safety Precautions for Lithium lon Rechargeable Battery Pack Inaccurate handling of a Lithium ion rechargeable battery may cause leakage heat smoke an explosion or fire This could cause deterioration of performance or failure This may also damage the protection device installed in the battery pack This could damage equipment or injure users Thoroughly follow the instructions below While Charging the Battery Pack IN DANGER To reduce the risks asso
13. ciated with fire and explosion which if not avoided could result in serious injury or death Danger of explosion if a battery Is incorrectly handled charged disposed or replaced Replace only with the same or equivalent type recommended by DYMO When charging the battery use dedicated chargers and follow the specified conditions Do not connect directly to an electric outlet or cigarette lighter charger Do not store the battery close to fire or at extremely high temperatures over 60 C for example a vehicle strong direct sunlight Do not short circuit the batteries under any circumstances Never charge batteries near highly flammable objects WARNING To reduce the risks associated with fire and explosion which if not avoided could result in serious injury or death and or property damage Stop charging the battery if charging is not completed within the specified time m Never leave the batteries unattended during charging Do not attempt to charge a cell that is damaged Immediately remove the battery from the device or battery charger and stop use if the battery gives off an odor generates heat becomes discolored or deformed or in any way appears abnormal during use CAUTION To reduce the risks associated with various hazards which if not avoided may result in minor or moderate Injury and or property damage Thoroughly read this document before charging the battery Li
14. cree ee Cee 6 0 arka 7 H GB da apace a S kA R O AAN 7 TEU SAE ar O OE E E EE E AT EERE E OMAN CVG a k a ORTA a r r aca E 7 ara E AAA AA RANA DA 7 Venica Mena a a s ky i hat gle tee d AREA E E 7 iaa 7 OUT Label ji terse s u F S ts AA ad A cita 7 eb a OW AS 8 0 ae et yeaa Pn 00 0 ENANOS Text aS 8 le ade a awa ee Od 8 5 0 AGGING Borde risas He OOS tal oe eo Sa l lkk A r p ee a 8 N R eee AA y 8 TE a E a ae ath eleva ee adb k Creating Vemical Labels s v nash bees lr lr kiss ee ed Okk dia 9 0 LCN Ereatno PG Ge OX Eas doen k teak eee ies av oie eens E Cee eee ea ee ee aren Ges 9 oa ed era als a ane ace eae 9 do ae 0 Creatina TW OSL ING La De b i b b Us k Va ie dane e 9 Using Clip Art Symbols and Special Characters RAGING SVINDOIS seiri Pans A See rate ee ee 9 PAGING CIMAM a a o oo tea an dear eS Ath ee cn eds each natch A IN 10 Adding Accented Characters urraca ad ee ee ae ee Se ee ae eee Hee k 10 be ee s 10 eed a a oe ad 0 Date and TMe 20 skur i va a in aa Rae wh EA 11 0 ne ee AAN WR OER Oy USO Atos N UMD CHING rr binges ad aw Deng Atos UMC ON so vas sa ira 0 eure mange Oates 0070 eats pesca ds eee 11 Sack 0
15. customizing your label maker You can choose the display language units of measure and set the width of the label Changing the Language You can change the display language for the label maker so that you can work in a language that is most familiar to you To change the language 1 Press select Z and then press OK 2 Select the current language and then press OK 3 Press A or Vto select the desired language and then press OK Setting the Label Width Each time you insert a label cassette into the label maker you are prompted to set the label width so the label maker knows what size label you are currently using Some of the features available for designing labels depend on the width of the label You can change the label width setting at any time regardless of what label cassette is actually inserted in the label maker To change the label width setting 1 Press lateral select a and then press OK 2 Select the current label width and then press OK 3 Press lt or gt to Select the desired label width and then press OK Setting the Units of Measure You can choose to work in English Inches or Metric units Metric is selected by default To change the default units of measure 1 Press select a and then press OK 2 Select var and then press OK 3 Press gt or gt to select inches or millimeters 4 Press OK Printing Options You can preview your label layout or print multipl
16. e copies Previewing Your Label Layout You can preview the size and layout of your label prior to printing To preview your label layout gt Press and hold for a few seconds The label length width and layout information are displayed Printing Multiple Labels You can print up to ten copies of a label To print multiple labels 1 Press 2 and hold for a few seconds 2 Press A or y to select the number of copies to print and press OK When printing is finished the number of copies to print returns to the default value of 1 Using the Label Maker Memory The label maker has a powerful memory feature that allows you to save the text of up to nine frequently used labels You can recall saved labels and you can also insert saved text into the current label Saving a Label You can save up to nine frequently used labels When you save a label the text and any formatting are saved To save the current label 1 Press 3 The first available memory location Is displayed 2 Use the navigation keys to move through the locations You can store a new label in any of the memory locations 3 Select a memory location and then press OK Your label is saved and you are returned to the label Opening Saved Labels You can easily open labels that are saved In memory To open saved labels 1 Do one of the following e Press and hold for a few seconds Press Mr and then select pee The first memory location is displayed
17. el cassette Delete some or all of the buffer text Decrease the text size Delete lines to fit on the label width Insert a wider label cassette Change to a variable length label Delete some text Print the label using variable length Attach the charging adapter to the label maker to recharge the battery pack See Recharging the Battery Pack Ensure the battery pack Is inserted correctly See Inserting the Battery Pack Replace the battery pack DYMO labels have an easy to peel split back Split label 1 Locate the split on the label backing p 2 Gently pinch the label lengthwise folding toward the F printed side of the label The label backing will separate N gt 3 Carefully peel away the backing from the label If you need further assistance visit the DYMO Web site at www dymo com 15 Documentation Feedback We are constantly working to produce the highest quality documentation for our products We welcome your feedback Send us your comments or suggestions about our user guides Please include the following information with your feedback Product name model number and User Guide page number Brief description of instructions that are inaccurate or unclear areas where more detail is needed and so on We also welcome your suggestions about additional topics you would like to see covered in the documentation Send email messages to documentation dymo com
18. ing tas and then selecting Ti 1 To set up the label maker 1 Press to turn on the power 2 Select the language and press OK 3 Select inches or mm and press OK 4 Select the width of the label cassette currently in the label maker and press OK Each time you insert a label cassette into the label maker you are prompted to set the label width so the label maker knows what size label you are currently using You are now ready to print your first label To print a label 1 Using the keyboard enter text to create a simple label Press 5 The label prints Press the cutter button to cut the label Split label backing 4 Remove the backing from the label to expose the adhesive and then attach the label Congratulations You have printed your first label Continue reading to learn more about the features available for creating labels Getting to Know the Label Maker Become familiar with the location of the feature and function keys on your label maker Refer to Figure 1 on page 4 The following sections describe each feature in detail Power The h button turns the power on and off After two minutes of inactivity the power is switched off automatically When the power is switched off either manually or automatically the label text and style settings for the last label are remembered and displayed when the power is turned back on LCD Display With DYMO s exclusive graphical display most of the formatti
19. move the battery pack if the label maker will not be used for a long period of time A Make sure the charging adapter is disconnected before handling the Li ion battery pack To remove the battery 1 Unplug the charging adapter 2 Slide the battery compartment cover away from the label maker See Figure 2 3 Remove the battery from the battery compartment A Make sure to read the Li ion Safety Precautions found on page 17 Inserting the Label Cassette Your label maker comes with a starter label cassette The label maker uses DYMO D1 label cassettes in widths of 6 mm 1 4 9 mm 3 8 or 12 mm 1 2 Visit www dymo com for information about purchasing additional label cassettes To insert the label cassette 1 Lift the label cassette cover to open the label compartment See Figure 4 Figure 4 2 Make sure the tape and ribbon are taut across the mouth of the cassette and that the tape passes between the label guides See Figure 5 If necessary turn the ribbon rewind spool clockwise to tighten the ribbon Ribbon rewind spool 3 Insert the cassette and press firmly until cassette clicks into place See Figure 6 Figure 6 4 Close the label cassette cover Using the Label Maker for the First Time The first time you turn on the power you are asked to select the language units of measure and label width These selections remain set until you change them You can change these selections by press
20. ng you add is visible instantly Feature Indicators along the top and side of the LCD display appear in black to indicate when a feature Is selected 1 2 3 4 5 ama 6 BasicSerifFun Pt cH CT ABC lt gt 7 8 9 12 10 xl 11 1 Uppercase 7 USB connected 2 Lowercase 8 Text alignment 3 Accented character 9 Mirror text 4 Font 10 Fixed length label 5 Textsize 11 Auto numbering 6 Battery indicator 12 Edit area Navigation Keys You can navigate through menu selections using the navigation keys lt gt and V You then press OK to make a Selection You can also review and edit your label using the navigation keys Cancel Pressing _ exits a menu without making a selection Backspace Pressing 821 removes the character to the left of the Cursor Caps Mode Pressing Aa toggles capitalization on or off When Caps mode is on all letters that you enter are capitalized The default setting is Caps mode on When Caps mode is off all letters appear in lowercase New Label Clear The 6 key gives you the option to clear the label text and keep the formatting or to clear both the text and the formatting Text Size Pressing aAA changes the size of the label text the Current text size is displayed on the LCD display Format Keys Pressing B or U toggles bold italic and underline on or off Vertical Text Pressing LAU toggles vertical text on or off Menu Pressing dis
21. our computer 3 Press to turn on the label maker 4 lf you have more than one DYMO label printer installed do the following a Click the printer image in the DYMO Label software Print area g Muriber of copies mi k r prim All of the label printers that are installed on your computer are displayed b Select the LabelM anager 280 label maker You are now ready to print labels from DYMO Label software For more information see Using DYMO Label Software on the next page Using DYMO Label Software The following figure shows some of the major features avallable in DYMO Label software Apply a Capture an area of the layout to a label screen to insert on your label Fa E i A d Cr 3 gt N Pie Foe View Format F n Liyan Address 500 Hel Visually choose your label type and apply layouts Insert text addresses images shapes lines barcodes dates and counters 1 2 ch izma Store your favorite addresses or other data in the Address A Book automatically Saved Labels insert the data on your label Recently Printed Labels Select a printer to View the label maker status Print a label print your labels For complete details on using the software refer to the online Help From the Help menu you can view the following DYMO Label Help DYMO Label User Guide LabelManager 280 User Guide Viewing the Label Maker Stat
22. plays the Format Insert Open and Settings tabs Use the options on these tabs to change the label appearance insert clip art and symbols open saved text and labels and change the printer settings 1 2 3 4 ABC Basic Pt ZY mun lf 08 er 1 amp 1 1 Format tab 3 Open tab 2 Insert tab 4 Settings tab Formatting Your Label You can choose from several format options to enhance the appearance of your labels 7 AZ e ne SS 1 F i H i 1 A 5 6 1 Fonttype 5 Label length 2 Textsize 6 Text alignment 3 Text style 7 Mirror text 4 Borders Changing the Font Type Three font types are available for your labels aa 8 gt gt _ TKR Serif Fun To change the font type 1 5 Ma select LA and then press OK 2 Select BA and then press OK 3 Press or y to select the font type and then press OK Changing the Text Size Six text sizes are available for your labels A Coe CT The text sizes available depend on the label width you have selected For single line labels Label Width 6 mm 1 4 9 mm 3 8 12 mm 1 2 For two line labels Label Width 9 mm 3 8 8 10 point 12 mm 1 2 8 10 12 point The text size applies to all characters on a label Text Size Available 8 10 12 point 8 10 12 16 20 point 8 10 12 16 20 24 point Text Size Avallable To change the text size 1 Press select ETA I and then press OK 2 Select
23. the charging adapter to the label maker to recharge the battery pack See Recharging the Battery Pack m Clean the print head See Caring for Your Label Maker Ensure the label cassette is installed properly Replace the label cassette Auto numbering already appears on the label and cannot be added more than once to the same label Ensure the battery pack is inserted correctly See Inserting the Battery Pack Replace the battery pack Allow the battery pack to recharge before unplugging the label maker See Recharging the Battery Pack Delete some or all of the buffer text Decrease the text size Delete lines to fit on the label width Insert a wider label cassette Open the cassette compartment and insert a label cassette See Inserting the Label Cassette Open the label cassette compartment and remove the cassette Remove jammed label clearing the jam m Clean the cutter blade See Caring for Your Label Maker Make sure the label passes smoothly through the label guides on the label cassette and that the label and ribbon are taut across the mouth of the cassette See Inserting the Label Cassette No action required Message disappears when printing is finished m Press OK to print a variable length label Delete some or all of the buffer text Decrease the text size Delete lines to fit on the label width Insert a wider lab
24. thium cells must be completely discharged before disposal Always dispose the batteries in a manner consistent with local regional and national regulation Battery can only be charged within a temperature range of 0 C 45 C While Discharging the Battery Pack IN WARNING To reduce the risks associated with fire and explosion which if not avoided could result in serious injury or death and or property damage Use the battery only in the specified equipment Do not discharge the battery close to fire or at extremely high temperatures over 60 C for example a vehicle strong direct sunlight CAUTION To reduce the risks associated with various hazards which if not avoided may result in minor or moderate Injury and or property damage Battery can only be used within a temperature rage of 20 C 60 C 17
25. us The label maker status is displayed in the DYMO Label software Print area The following table describes the possible states of the label maker ay E E Label maker is connected and battery pack is charging a Label maker is connected and battery pack Is charging printing is not possible Label maker is connected and battery pack is not charging Label maker is connected and battery pack is not charging printing is not possible Label maker is not connected or is turned off T2 Label maker is connected and there is a problem with the battery pack 14 Troubleshooting Review the following possible solutions if you encounter a problem while using your label maker Problem Error Message No display Poor print quality Auto numbering already inserted Battery Failure Battery pack not inserted properly or damaged Wait n minutes Battery Charging Too Many Characters Exceeded maximum number of characters in the buffer No label found Insert label cartridge Label jam Motor is stalled due to label jam Printing Print label with variable length Label length exceeds fixed length Too many lines for selected label width Label Length Exceeds Fixed Length Charge Battery How do remove the backing from the label Solution Ensure the label maker is turned on Attach the charging adapter to the label maker to recharge the battery pack See Recharging the Battery Pack m Attach
Download Pdf Manuals
Related Search