Philips CarStudio CE138
Contents
1. to start play Charge your iPod iPhone Once the iPod iPhone is connected and recognized the charging starts EN 19 8 Listen to an external player You can use the system to amplify the audio input from an external player for example MP3 player 1 Switc h the source to MP3 LINK 2 Connect an MP3 link cable to e the MP3 LINK socket on the system a nd the audio output socket usually the P headphone socket on the external ayer 3 Play the external player 20 EN 9 Adjust sound The following operations are applicable to all supported media Button Function Rotate to increase or decrease the volume level Press to mute the speakers or release them from mute status Press to enable or disable the SOUND P DBB maximum volume a Press and hold to enable or disable Deg the Dynamic Bass Boost DBB effect EQ Press repeatedly to select a sound AUDIO equalizer EQ AUDIO 1 Press and hold to activate the setup of customized sound equalizer 2 Press repeatedly to select an option BAS bass TRE treble BAL balance or FAD fader 3 Rotate amp to adjust the setting EN 21 10 Additional Replace the fuse info rmation If there is no power check the fuse and replace it if it is damaged 1 Check the electric connection 2 Remove the damaged fuse from the r2. EN 23 12 Troubleshooting Warning e Never remove the casing of this product To keep the warranty valid never try to repair the product yourself f you encounter problems when using this following points before f the problem remains unsolved go to the Philips Web page www philips com support When you contact the ake sure that the product number and serial No power or no sound product check the requesting service Consumer Care m is nearby and the mode number are available The power supply from car battery is cut off or the car battery runs out of energy Power the system with car battery Car engine is not on Turn the car engine on Cable is not correctly connected Check connections The fuse is burnt Replace the fuse Volume is too low Adjust volume If the above solutions cannot help press the RESET button Make sure that the current track is in a compatible format Noise in broadcasts Signals are too weak Select other stations Preset stations are erased Battery cable is not correc 24 with stronger signals Check the connection of the car antenna Change the broadcast setti to mono ng from stereo tly connected Connect the battery cable to the terminal that is always live EN Cannot switch the source to iPod iPhone e Check whether the iPod connected e Check whether the iPod compatible with this sys iPhone is
3. a sound data compression system MP3 is the abbreviation of Motion Picture Experts Group 1 or MPEG 1 Audio Layer 3 S SD Secure Digital A type of memory card with a flash memory SDHC Secure Digital High Capacity SDHC is a type of flash memory card based on the SDA 2 00 specification The SDA 2 00 specification enables SD cards to reach higher capacities from 4GB to 32GB and growing W WMA Windows Media Audio An audio format owned by Microsoft is a part of Microsoft Windows Media technology Includes Microsoft Digital Rights Management tools Windows Media Video encoding technology and Windows Media Audio encoding technology 26 EN PHILIPS 2013 WOOX Innovations Limited All rights reserved Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N V and are used by WOOX Innovations Limited under license from Koninklijke Philips N V CE138_12_UM_V4 0
4. band Return to the previous menu For iPod iPhone press repeatedly to select a control mode control play on the iPod iPhone or on this system LCD screen lt lt Connect to a USB storage device Connect to a compatible iPod iPhone MP3 LINK Connect to the audio output socket usually the headphone socket of an external device D PIG Start pause or resume the play of tracks e In radio mode press to select the preset radio station of No 6 e In radi the cu No 6 5 e In radi prese e In radi the cu No 5 9 SHUF 4 prese e In radi the cu No 4 o mode press and hold to store rrent radio stat o mode press radio station o to se f No ion at Cc 5 ect hannel the o mode press and hold to store rrent radio stat n radio mode press to se radio station of No o mode press and hold to store rrent radio stat ion at ion at Cc 4 Cc ect hannel the hannel For wma and mp3 tracks press al tracks repeat edly to select a play mode play tracks randomly SHU ALL play in the current folder or album rando ie 3 REP prese the cu No 3 mly SHU FLD SHU ALBM r play all tracks in the sto in sequence SHU OFF n radio mode press to se radio station of No In radio mode press and hold to store rrent radio stat iona 3 CC rage device ect the
5. hannel For wma and mp3 tracks press G wh 2 In radio mode press to select prese radio station of No 2 e In radio mode press and hold to store the cu No 2 For wma and mp3 tracks on device press to access the fo QIN In radio mode press to select repeatedly to select a repeat mode the rrent radio station at channel preset radio station of No 1 e In radio mode press and hold to store the current radio station at channel No 1 a storage der list the 3 DSP AS SOURCE For wma and mp3 tracks on a storage device press to access the track list Press to access the music menu of an iPod iPhone Press repeated nformation ab Press repeated Press and hold Press repeated In radio mode activate the au stations EQ AUDIO O Press to turn on the system Press repeated sound equalizer Press and hold bass treble bal ly to display available out the current track ly to display available RDS information to display the set clock y to select a source press and hold to omatic search of radio y to select a preset to activate the setup of ance and fader Press and hold Press to confir options Rotate to adjust the vo vy ZONE For wma and mp3 tracks on a storage device press to select the next folder Press and hold Press to mute the speal them from mute status to turn off t
6. the product could result in hazardous radiation of EMC or other unsafe operation The device is designed for negative ground earth 12V DC operation only To ensure safe driving adjust the volume to a safe and comfortable level mproper fuses can cause damage or fire When you need to change the fuse consult a professional Use only the supplied mounting hardware for a safe and secure installation To avoid short circuits do not expose the device to rain or water The device shall not be exposed to dripping or splashing Do not place any sources of danger on the device e g liquid filled objects lighted candles Never insert objects into the ventilation slots or other openings on the device Clean the device with soft damp cloth Never use substances such as alcohol chemicals or household cleaners on the device EN 2 Your car audio system Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your product at www philips com welcome Introduction With this system you can e enjoy audio from a USB storage device SD SDHC card iPod iPhone and external player e charge your iPod iPhone and e listen to radio stations You can enrich sound output with these sound effects Dynamic bass boost DBB Digital sound control DSC Playable media e USB storage device Compatibility USB 2 0 USB 1 1 e Class suppo
7. Always there to help you Register your product and get support at www philips com welcome CON Quesaon Contact Philips CE138 User manual PHILIPS Contents 1 Safety 9 Adjust sound 21 Your car audio system Introduction What s in the box Overview of the system KW WwW Ww Install the car audio system Connect wires Mount into the dashboard Attach the front panel Oo ON N Get started For the first time use Set the time format Set the clock Select a source Select a listening zone Mute the button beep a SS Sk oS ks Listen to radio Select a tuner region Select a tuner sensitivity Search for a radio station Store radio stations in memory Play with RDS 5 EA BWW WwW Ww Ww Play from a storage device Control play Switch tracks ND OO Play from an iPod iPhone Compatible iPod iPhone models Connect your iPod iPhone Control play Charge your iPod iPhone Oo Listen to an external player 20 10 Additional information Reset the system Replace the fuse 22 22 22 11 Product Information 23 12 Troubleshooting 25 13 Notice Care of the environment Trademark notice Copyright 23 25 25 25 14 Glossary EN 26 1 Safety Read and understand all instructions before you use this device If damage is caused by failure to follow instructions the warranty does not apply Modification of
8. BEEP ON or BEEP OFF is displayed BEEP ON Enable the beep sound of buttons BEEP OFF Mute the beep sound of buttons 3 Rotate O1 to change the setting 12 EN 5 Listen to radio Select a tuner region You can select a radio region that matches your location 1 In radio mode press and hold vau tO access the system menu D Press vau 2 repeatedly until one of the following options is displayed AREA EUROPE Western Europe AREA ASIA Asia Pacific AREA MID EAST Middle East AREA AUST Australia AREA RUSSIA Russia AREA USA United States AREA LATIN Latin America AREA JAPAN Japan 3 Rotate amp to select a region Select a tuner sensitivity To search for radio stations with strong signals only or more radio stations you can change the tuner sensitivity 1 Press and hold su to access the system menu 2 Press s u ve repeatedly until LOC ON or LOC OFF is displayed 3 Rotate amp to select a setting LOC ON Search for radio stations with strong signals only LOC OFF Search for radio stations with strong and weak signals Search for a radio station Search for a radio station automatically Press MEd or PPI to search for the previous or next radio station with strong signals Search for a radio station manually 1 Press and hold MEM or PP until M blinks 2 Press ld or DP repeatedly until the target freq
9. CLK 12H CLK 24H 24 hour time format e CLK 12H 12 hour time format Set the clock 1 Press and hold sftu to access the system menu 2 Press s u zone repeatedly until CLK is displayed with time digits blinking 3 Rotate amp anti clockwise to set the hour 4 Rotate amp clockwise to set the minute Display the clock Press and hold DISP until CLK and the set clock are displayed e To exit the clock display press any button or rotate O amp Select a source Press AS SOURCE repeatedly to select a source e RADIO Listen to FM AM radio e MP3 LINK Listen to the audio input through the MP3 LINK socket iPod USB When a USB storage device or compatible iPod iPhone is connected and recognized you can select this source to play audio files that are stored on it SD SDHC When an SD SDHC card is inserted and recognized you can select this source to play audio files that are stored on it Select a listening zone 1 Press and hold ze until one of the following options is displayed ALL For all passengers FRONT L For the front left seat only FRONT R For the front right seat only FRONT For front passengers only 2 Press vau 2 repeatedly to select a listening zone EN 11 Mute the button beep The beep sound of buttons is enabled by default 1 Press and hold sftu to access the system menu 2 Press wttu 20 repeatedly until
10. F Select a program type Before tuning to RDS stations you can select a program type to search for programs of the selected category only T Press and hold s tw to access the system menu 14 EN 2 Press wf 20 repeatedly until PTY is displayed 3 Press amp to access the list of program types 4 Rotate amp to select a program type and then press amp to confirm Item Program Description type 1 NEWS ews services 2 AFFAIRS Politics and current affairs 3 INFO Special information programs 4 SPORT Sports 5 EDUCATE Education and advanced raining 6 DRAMA Radio plays and literature 7 CULTURE Culture religion and society 8 SCIENCE Science 9 VARIED Entertainment programs 10 POP M Pop music 1 ROCK M Rock music 12 EASY M Light music 3 LIGHT M Light classical music et CLASSICS Classical music 5 OTHER M Special music programs 6 WEATHER Weather 17 FINANCE Finance 8 CHILDREN Children s programs 19 SOCIAL Social Affairs 20 RELIGION Religion 21 PHONE IN Phone In 22 TRAVEL Travel 23 LEISURE Leisure 24 JAZZ Jazz Music 25 COUNTRY Country Music 26 NATION M __ National Music 27 OLDIES Oldies Music 28 FOLK M Folk Music 29 DOCUMENT Documentary Item Program Description type 30 TEST Alarm Test 31 ALARM Alarm Use alternate frequencies If the signal of an RDS station is poor enable the AF Altern
11. ate Frequency function to search for another station that broadcasts the same program 1 Press and hold su to access the system menu 2 Press ftw 2 repeatedly until AF ON or AF OFF is displayed 3 Rotate amp to select a setting AF ON Enable the AF function AF OFF Disable the AF function Set the region for AF tuning You can set the region for AF tuning 1 Press and hold s tw to access the system menu 2 Press wau ze repeatedly until REG ON or REG OFF is displayed 3 Rotate amp to select a setting REG ON Only RDS stations in current region can be tuned to automatically REG OFF All RDS stations can be tuned to automatically Receive traffic announcement If you want to receive traffic announcement enable the TA Traffic Announcement function a 1 Press and hold u to access the system menu D Press s u ave repeatedly until TA ON or TA OFF is displayed 3 Rotate amp to select a setting TA ON When a traffic announcement is on air the system automatically switches to the tuner mode and begins to broadcast the traffic announcement When the traffic announcement is over the system returns to the previous mode TA OFF Traffic announcement does not cut in Tip 2 e When a traffic announcement cuts in you can press Q to switch the system to the previous mode Synchronize the system clock You can synchronize
12. ear panel Reset the system 3 Insert a new fuse with the same If the system works abnormally reset the specinicationis 15A system to factory default settings 3 z gt mJ rir fo O titel o CEE a K AI FUSE 15A Note 1 Detach the front panel e Ifthe fuse gets damaged immediately after it is 2 Press the RESET button with the tip ofa replaced an internal malfunction may occur In such s case consult your retailer ball point pen or toothpick L All settings are reset to factory default 22 EN 11 Product Information Note e Specifications are subject to change without prior notice General Power supply 12V DC 11V 16V negative ground Fuse ISA Suitable speaker 4 8Q impedance Maximum power output 50 W x 4 channels Continuous power 22W x4 RMS 40 output 10 TH D Pre Amp output LSN voltage Aux in level gt 500 mv Dimensions Main unit W x H x D 188 X 58 X 110 mm Weight Main unit 0 63 kg Radio Frequency range FM 87 5 108 0 MHz 100kHz per step in auto search and 50kHz per step in manual search Usable sensitivity FM S N 20 cB 8 uV Frequency range AM MW 522 1620 KHz 9 kHz 530 1710 kHz 10 kHz Usable sensitivity AM MW S N 20 dB 30 uV
13. ext l gt Pi rack This car audio system supports the following iPod and iPhone models lda Press and hold to rewind a track or iPhone 45 iPhone 4 iPhone 3GS and PPI search forward fast iPhone 3G DISP Press repeatedly to display available e iPod touch 2nd 3rd and 4th generations information about the current e iPod classic rack e iPod nano 3rd 4th 5th and 6th generations 3 REP Press repeatedly to select a repeat mode e REP ONE repeat the current Connect your iPod iPhone track or REP ALL repeat all tracks SHUF 4 Press repeatedly to select a play mode e SHU ALL play all tracks randomly e SHU ALBM play tracks in the current album randomly or e SHU OFF play all tracks in the iPod iPhone library in sequence Search for a track Connect an Apple 30 pin USB cable to After accessing the iPod iPhone menu you can e the USB socket on the front panel of this select a specific track quickly system and 1 Press 1 JI to access the iPod iPhone menu e your iPod iPhone tL PLAYLIST scrolls L gt iPod USB scrolls Ly The system starts playing tracks that are stored on your iPod iPhone 18 EN 2 Rotate amp to select a category 3 Press amp to access the list of tracks under the category L gt The file name of the first track scrolls 4 Rotate amp to select a track L gt The file name of current track scrolls 5 Press
14. he system ers or release m an option Rotate to switch between menu ume level to activate the selection of listening zones Press to select lt lt gt Pi Tune to a radio station Press to skip to the previous next track Press and hold a tuner band to rewind a track or search fast forward EN 5 DEB e Press to enable or disable the maximum volume e Press and hold to enable or disable the DBB dynamic bass boost sound effect BAND e Press repeatedly to select a tuner band Q1 Slot for SD SDHC card Insert an SD SDHC card Q2 RESET e Press to reboot the system 6 EN 3 Install the car audio system Caution e Use the controls only as stated in this user manual Always follow the instructions in this chapter in sequence These instructions are for a typical installation However if your car has different requirements make the adjustment accordingly If you have any question regarding installation kits consult your local retailer e This system is designed for negative ground earth 12V DC operation only e Always install this system in the car dashboard Other locations can be dangerous as the rear of the system heats up during use e To avoid short circuit before you connect make sure hat the ignition is off e Make sure that you connect the yellow and red power supply leads after all other leads are connected e Make sure that all loose
15. hite edged blue Amplifier relay strip control lead h Black strip Ground ISO male Connect to connectors Yellow strip To the 12V car battery which is energized at all times 2 Connect the antenna and amplifier as illustrated if applicable Sockets on rear External sockets or panel connectors 1 For ISO male As indicated above connectors 2 REARL Rear left speaker 3 REARR Rear right speaker 4 ANTENNA Antenna Tip e The pin arrangement for the ISO connectors depends on the type of your vehicle To avoid damage to the unit connect properly Mount into the dashboard e If the car does not have an on board drive or navigation computer disconnect the negative terminal of the car battery e If the car battery is not disconnected to avoid short circuit make sure that the bare wires do not touch each other 1 Make sure that the car dashboard opening is within these measurements op z E eal LA 2 Remove the mounting sleeve with the supplied disassembly tools 3 Install the sleeve into the dashboard and bend the tabs outward to fix the sleeve 4 Slide the unit into the sleeve until you hear a click 5 Attach the trim plate 6 Reconnect the negative terminal of the car battery Attach the front panel 1 Insert the notch on the front panel to the chassis on the ma
16. in unit 0000000000000 000000000000 Im Al 2 Press the left end of the front panel inwards until it is securely locked with a oooooo0oaaaaaoaaaavaa 0 N 0000000000000 PHIS N Detach the front panel Note e Before you insert an SD SDHC card or reset the system detach the front panel e Before you detach the front panel make sure that the system is turned off 1 Press us to release the front panel 2 Pull the front panel outwards to remove it 10 EN 4 Get started For the first time use 1 Press amp to turn on the system Ly PHILIPS is displayed and then SELECT OPERATING REGION select a radio region scrolls 2 When one of the following options is displayed rotate K to select a radio region that matches your location e AREA EUROPE Western Europe AREA ASIA Asia Pacific AREA MID EAST Middle East AREA AUST Australia e AREA RUSSIA Russia AREA USA United States e AREA LATIN Latin America AREA JAPAN Japan 3 Press amp to confirm L gt The system switches to radio mode automatically e To turn off the system press and hold amp until the screen backlight is off Set the time format 1 Press and hold sftu to access the system menu 2 Press wt ze repeatedly until CLK 24H or CLK 12H is displayed 3 Rotate amp to select CLK 24H or
17. leads are insulated with electrical tape e Make sure that the leads do not get caught under screws iron parts that will move e g seat rail e Make sure that all ground earth leads are run to a common ground earth point e Use only the supplied mounting hardware for a safe and secure installation e Improper fuses can cause damage or fire When you need to change the fuse consult a professional e When you connect other devices to this system make sure that the rating of the car circuit is higher than the otal fuse value of all the connected devices e Never connect speaker wires to the metal body or chassis of the car e Never connect speaker wires with stripes to one another Connect wires Note e The ISO male connectors are not supplied e Make sure that all loose leads are insulated with electrical tape e Consult a professional to connect wires as instructed below 1 Check the car s wiring carefully and connect them to the ISO male connectors EEE F y ISO male connectors Eoo a Green strip black edged green strip b White strip black edged white strip Rear left speaker Front left speaker c Gray strip black Front right speaker edged gray strip d Purple strip black Rear right speaker edged purple strip e Red strip Ignition key 12V DC when ON ACC f Blue strip Motor electric antenna relay control lead g W
18. ng the disposal of packaging materials exhausted batteries and old equipment Trademark notice Ay Plays a Ar Windows Media and the Windows logo are trademarks or registered trademarks of icrosoft Corporation in the United States and or other countries Made for ol iPod HiPhone ade for iPod and Made for iPhone mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively and has been certified by the developer to meet Apple performance standards Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards Please note that the use of this accessory with iPod or iPhone may affect wireless performance iPod and iPhone are trademarks of Apple Inc registered in the U S and other countries Other trademarks and trade names are those of their respective owners Copyright 2013 WOOxX Innovations Limited All rights reserved Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N V and are used by WOOX Innovations Limited under license from Koninklijke Philips N V Specifications are subject to change withou notice WOOxX reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly EN 25 14 Glossary M MP3 A file format with
19. rt MSC Mass Storage Class e Maximum capacity 32 GB SD SDHC card Maximum capacity 32 GB e File system FAT16 FAT32 Maximum number of folders 99 Maximum number of tracks files 999 Maximum level of directory 8 mp3 files Sampling frequencies 32 kHz 44 1 kHz 48 kHz Bitrates 8 320 kbps and variable bitrates e wma files Versions V4 V7 V8 V9 L1 and L2 Sampling frequencies 44 1 kHz 48 kHz Bitrates 64 192 kbps and variable bitrates ID3 tag V2 0 or later e Unsupported files AAC WAV and PCM files DRM protected WMA files way m4a m4p mp4 and aac WMA files in lossless format What s in the box Check and identify the contents of the package Main unit with a sleeve Carrying case with front panel included Trim plate Disassembly tool X 2 User manual QHOeOoOo0S CD ROM for user manual EN 3 Overview of the system PHILIPS CarStudio Aupio sysTEM TUNER CEI38 c aa Bone MA EE Ea IS m Ti 1 iPod INGO GA AS Mesane Q f source vise SREP SHUF 4 5 mug O 000000 Unlock the front panel For wma and mp3 tracks press to select the previous folder e Press and hold to access the system menu e Press to select a tuner
20. securely iPhone is tem Check whether the iPod iPhone battery is nearly empty Connect it charging first Display shows ERR 12 to this system for Data error Check the U or SD SDHC card SB storage device 13 Notice Any changes or modifications made to this device that are not expressly approved by WOOX Innovations may void the user s authority to operate the equipment Care of the environment ab Your product is designed and manufactured with high quality materials and components which can be recycled and reused pi When this crossed out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products Please act according to your local rules and do not dispose of your old products with your normal household waste Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health Environmental information All unnecessary packaging has been omitted We have tried to make the packaging easy to separate into three materials cardboard box polystyrene foam buffer and polyethylene bags protective foam sheet Your system consists of materials which can be recycled and reused if disassembled by a specialized company Please observe the ocal regulations regardi
21. select a repeat mode e REP ONE repeat the cur rent track RPT FLD repeat all tracks in the current folder or RPT ALL repeat all tracks in the storage device Press repeatedly to select a play mode e SHU ALL play all tracks randomly SHU FLD play tracks in the current folder randomly or e SHU OFF play all tracks in the storage device in sequence Switch tracks During play you can switch tracks or folders quickly Switch tracks directly 1 Press 1 JI to access the track list L gt The file name of current track scrolls 2 Rotate amp to toggle through tracks 3 Press K to play the selected track Switch folders for a track 1 Press tall 2 to access the folder list L gt The name of current folder scrolls 2 Rotate amp to toggle through folders 3 Press amp to select the folder Ly The system starts playing the first track under the folder EN 17 7 Play from an Note H 4 Before you disconnect the iPod iPhone switch the l Po d l Ph O n e system to another source Note Control play e During play no audio signals are transferred through the headphone socket of your iPod iPhone Button Function ba Press repeatedly to select a control 0 mode control play on your iPod iPhone or on the system Compatible iPod iPhone biG Press to pause or resume play models laa Press to play the previous or n
22. the system clock with an RDS station that transmits time signals 1 Press and hold satu to access the system menu 2 Press vau 24 repeatedly until CT ON or CT OFF is displayed 3 Rotate amp to select a setting CT ON Synchronize the system clock with the RDS station automatically CT OFF The automatic clock synchronization with RDS station is disabled Tip e The accuracy of time depends on the RDS station that transmits time signals EN 15 6 Play froma storage device Connect a compatible USB storage device or SD SDHC card e Foran SD SDHC card detach the front panel first insert the card into the card slot and then attach the front panel Switch the source to iPod USB or SD SDHC e When a USB storage device is connected and recognized the system switches the source to iPod USB automatically If the play does not start press PI 6 EN Control play Button a vy MENU ZONE Function Press repeatedly to select a folder PIG Pause or resume play lt lt PPI Press to play the previous or next track lt lt gt gt I Press and hold to rewind a track or search forward fast DISP Press repeatedly to display available information about the current track 3 REP SHUF 4 Press repeatedly to
23. uency is displayed Store radio stations in memory Note You can store a maximum of six stations in each band Store radio stations automatically d Switch the source to RADIO 2 Press BAND sient Or zone repeatedly to select a band 3 Press and hold AS SOURCE until STORE is displayed Ly After the search is complete the first stored radio station is broadcast automatically To select a stored radio station press 1 J3 wl 2 SREP SHUF 4 5 or PIG EN 13 Store radio stations manually 1 Press BAND soni or ze repeatedly to select a tuner band 2 Tune to the radio station that you want to store 3 Press and hold 1 JJ wi 2 SREP SHUF 4 5 or Pll 6 to store the radio station at the selected channel To select a stored radio station press 1 J3 wl 2 3 REP SHUF 4 5 or PIG Play with RDS The RDS Radio Data System function operates only in areas with FM stations broadcasting RDS signals If you tune to an RDS station the station name is displayed Enable the RDS function Note e The RDS function is enabled by default Only when the RDS function is enabled RDS related settings can be accessed 1 Press and hold u to access the system menu 2 Press vau 2 repeatedly until RDS ON or RDS OFF is displayed 3 Rotate amp to select RDS ON L gt The RDS function is enabled e To disable the RDS function rotate amp to select RDS OF
Download Pdf Manuals
Related Search