Exposure 2010s2
Contents
1. NO USER SERVICEABLE PARTS INSIDE p FUSE TAAA Digital Output Connect the digital outputs either to e An external digital to analogue converter OOO Or gt 00000 To a digital device such as a CDR machine or minidisc recorder For hints on improving sound quality please refer to Extended Set Up overleaf The Exposure 2010S2 CD Player Front View Press power switch BrP DETECTA jez ee ee ee PPH The display will illuminate The LED power indicator will light up b Connect to the mains outlet on the wall DO NOT switch on until all input and output connections are 4 Function Controls LEH BEG jnar PAE jo GQGGQGG Open Opens and closes the CD loading drawer Stop Stops disc playback Play Pause Starts disc playback Pressing Play Pause while a disc is playing will pause playback Pressing Play Pause again will resume playback lt lt Selects the previous track In sequence gt gt Selects the next track in sequence Display Press once to turn display off The display will stay off until another button Is pressed and it will then go off again after a short delay Press Display again to turn it back on 5 Remote Control Press the black CD button on the remote control before using the grey function buttons otherwise the remote will not operate the CD player bes One Direct access track functions Display Press once to turn display off The display2. from an authorised Exposure dealer registered with the authorised agent in your country of residence and issued with a recognised warranty card The agent accepts no responsibility for defects arising from accident misuse abuse wear and tear neglect or through unauthorised adjustment and or repair or replacement of any components nor will they accept responsibility for damage or loss occurring during transit to or from the person making a claim under the warranty The Exposure warranty covers Parts and labour costs for three 3 years from the date of purchase Please retain your original receipt as proof of purchase and purchase date The guarantee is extended only to the original purchaser and is not transferable When making claims under this warranty The equipment should be suitably packed and returned to the dealer from whom it was purchased or directly to the local distributor together with proof of purchase or a copy of the dated sales receipt If necessary the unit should be sent carriage pre paid by a reputable carrier NOT by post No responsibility is accepted for the unit whilst in transit to the dealer or agent and customers are advised to insure the unit against loss or damage whilst in transit The warranty card MUST be produced when making claims against this guarantee Any tampering or alteration made to the warranty card or to the serial number on the equipment will invalidate t
3. will stay off until another button is pressed and it will then go off again after a short delay Press again to turn it back on PROG Programmable track selection RANDOM Random track selection TIME Track time countdown cnn pine RPT Track disc repeat ALUPH TUNER CD VOL PREV Selects the previous track in AUR AUXI TAPE VOL a sequence PROG RANDOM TIME RPT NEXT Selects the next track in sequence lt SEARCH gt Press and hold lt for Backward Scan Press and hold gt for Forward Scan PREY NEXT lt SEARCH PLAY STOP PAUSE OPEN Opens and closes the CD loading drawer Stop Stops disc playback Play Starts disc playback Pause Pauses playback Io resume play press again or press the Play button Exposure 2010S2 CD Player Extended Set Up Improving Sound Quality through Digital Output Connect the digital outputs either to a An external digital to analogue converter or b A digital device such as a CDR machine or Minidisc recorder C_ 99900 OOO O Both BNC coaxial and Toslink sockets are provided for these applications If neither of these outputs are used sound quality may be improved by disabling these outputs This is best carried out by your dealer To disable the outputs yourself E a a od O Switch off the CD player 2 Remove the mains lead from the wall and 3 Remove the four cover screws the IEC socket 4 Slide the cover back abou
4. f your Exposure 2010S2 CD Player please ensure the following Do not apply labels or stickers to CDs Do not write on CDs Do not use abrasive or solvent based cleaning fluids on the surface of CDs Do not remove the cover of the CD Player or dismantle the case except to remove or re fit digital output jumper J2 Protect unit against all forms of liquid Never expose unit to dripping or splashing or place objects filled with water such as vases on the unit Do not operate the CD Player in a damp environment or allow liquids To ene Ine Unit Do not attempt to bypass the mains fuse or replace the fuse with one of a different specification Do not use abrasive or solvent based cleaning fluids on the CD Player s case Failure to observe these precautionary measures may void your warranty Technical Specifications Output Level 2V RMS Frequency Response 20Hz 20KHz 0 03dB Total Harmonic Distortion lt 0 008 20Hz 20KHz OdBFs Signal to Noise Ratio gt Q0dB A weighted Digital Outputs SP DIF Coaxial and Toslink Optical Mains Supply MOPOV on 7220 2270 50 c0 factory set Power Consumption DVA Dimensions H x W x D 90 mm x 440 mm x 300 mm Nett Weight Unpacked 5 kg Gross Weight Packed 7 kg Exposure Warranty Policy The Exposure warranty entitles you to FREE repair of this unit for the first three 3 years from the date of purchase This warranty is valid only if the unit is purchased
5. he warranty The dealer or the agent shall notify the customer when the repairs have been completed The customer must claim the goods within fourteen days from the date of notice failing which the Company reserves the right to impose storage charges The Company reserves the right to dispose of the equipment after 90 days from the date of notice in a manner that it sees fit and without compensation to the customer
6. i high fidelity engineering since 974 Quick Start Manual Thank you for purchasing the Exposure 2010S2 CD Player Before you start Contents E e e ee ems Exposure 2010S2 CD Player Mains cable HS 101 Exposure System Remote Control batteries included Please note that your Exposure 2010S2 CD Player may take up to 48 hours to run in before reaching its optimal performance Each subsequent run in will then take about 30 minutes For optimum performance use Exposure speaker cables with your Exposure equipment f Installation a Connect the mains cable to the IEC mains input socket 2 Amplifier Connection made The Exposure 2010S2 CD Player is fitted with both analogue and digital audio outputs Please use your own preferred cables The Exposure 201052 CD Player Back View ANALOGUE MGITAL OUTPUT 5 CTR Ea re LEFT e ER RIGHT Analogue Output e Connect RCA Phono sockets to appropriate line input on the amplifier Make sure right and left channels are properly connected i Right channel is marked in red 3 Operation Ensure that the volume control knob or your amplifier is set to minimum EXPOSURE ELECTRONICS LTD 220V 240V 50 6 THE WORKS 59 NORTH STREET C 4 PORTSLADE SUSSEX BN411DH UK w POWER CONSUMPTIMa 92ta MADE IN ENGLAND a WARMING F F ELECTRIC SHOCK DONOTREMOVE Ti THE COVER
7. t 2 cm until it is free to move upwards 5 Pull out the internal jumper plug J2 found on the extreme left hand side about half way towards the back on the main circuit board inside the unit 6 Replace cover and screws Safety Incorrect installation or inappropriate use of the Exposure 201052 CD Player may result in injury due to electrical shock Ensure that the voltage rating on the rear panel of this unit matches that of your local mains supply Ensure that the mains cable and plug supplied with this unit is also correct Contact your dealer immediately if this is not the case This unit is protected by a mains fuse which is accessible as part of the IEC socket on the rear panel Fuse replacement specifications 220 240V units T630mA fuse 10 120V units T 1 25A fuse Tae B procure 200e CD He ar MOTT oe earne Protect unit against all forms of liquid Never expose unit to dripping or splashing or place objects filled with water such as vases on the unit Unplug unit from mains when not in use for prolonged periods Do not open this unit there are NO user serviceable parts inside Reduce the amplifier volume control to minimum before turning this unit on or off Ensure that this unit is switched off when connecting or disconnecting interconnect cables Contact Exposure Electronics for advice on moving your equipment to another country or territory Caution For a long and trouble free life o
Download Pdf Manuals
Related Search