Boss Audio Systems DVD/CD AM/FM Receiver
Contents
1. OK Press to confirm your selection W In DVD USB SD mode press it once to pre stop play press it twice to stop the play and return to the logo AMS RPT In radio mode press to activate auto seek preset store function In media play mode press to switch the repeat mode of programs ST PROG In media play mode press to enter into program mode to play the track in your desired sequence In radio mode press to set the reception between mono mode or stereo mode LOC RDM In radio mode press it to select between local and distant stations In media play mode press to play all tracks in random order 10 VOL VOL Press to increase decrease the volume level 11 PBC Z It can be used to change between PBC ON and PBC OFF on the VCD disc For DVD disc press to enter into the menu interface In Bluetooth mode press to hang up the phone 12 OSD Z In media play mode press to display OSD the on screen display information In Bluetooth mode press to pick up the phone or make a phone 13 0 9 Numeric buttons 14 Press to play pause the playback 15 MUTE Press to mute the sound press it again to resume the sound 16 TITLE Press to display the title menu of the DVD disc 17 SUB T Press to display the subtitle information of the DVD disc 18 SETUP In media play mode press to enter into the DVD setup menu 19 ANGLE Press to change the view angle on multi angle DVD disc LOCATIONS AND F2. MONO L MONO R and MIX MONO to be selected Note The displayed setting information is different according to different version On screen Display Function Press the OSD button on the front panel or on the remote control during playback to display the console information of the current disc on the screen For an example when playing a DVD disc Once you press OSD button you will see the information as the following order 1 Item TT Function Display the current title number and total title number 2 Item CH Function Display the current chapter number and total chapter number 3 Item This icon only displayed for several seconds after several seconds it will disappeared Function Display the played time of the current chapter 4 C Display the remaining time of the current chapter 5 T Display the played time of the current title 6 T Display the remaining time of the current title 7 C Display the played time of the current chapter WO OF Display the current disc s LANGUAGE AUDIO SUBTITLE LANGUAGE and PLAY ANGLE Note The displayed information is different according to different type of discs Last Play Memory 1 During disc playback if you turn off the unit and then turn on the unit again the DVD unit will resume playing from the point that just interrupted 8 2 During disc playback if you press MODE button to switch to other mode then re
3. ON x BV7335B _ BLUETOOTH ENABLED IN DASH DVD MP3 CD AM FM RECEIVER WITH 3 2 81mm WIDESCREEN TFT MONITOR WITH USB AND SD MEMORY CARD PORTS AND FRONT PANEL AV INPUT 04 2011 gt C BOSS Audio Systems 3451 Lunar Court Oxnard 93030 iPod is a trademark of Apple Inc registered in the U S and other countries 800 999 1236 User s Manual BLUETOOTH ENABLED IN DASH DVD MP3 CD AM FM RECEIVER WITH 3 2 81mm WIDESCREEN TFT MONITOR ITH USB AND SD MEMORY CARD PORTS AND FRONT PANEL AV INPUT CS BV7335B w SION e OXRONONO OOO ORORCER AUDIO SYSTEMS Boss Audio Systems is not affiliated with Apple Inc BV 335B OWNER S MANUAL Mobile Audio Video System o DOO T 000 3 2 Inch TFT Monitor DVD Player with Radio Fold down detachable Panel Bluetooth Hands free function amp A2DP Advanced Audio Distribution Profile Stereo Audio Transmission Memory Card Interface USB Interface AV IN interface on the front panel Parental Control Remote Control 5 SAFETY INFORMATION 3 DISO NOTES e M 5 INSTALLA HON sindicis 6 USING THE DETACHABLE FRONT PANEL 9
4. DVD REP OFF REP CHAPTER XREP TITLE REP REP ALL o MP3 REP OFF gt REP REP 1 REP REP DIR REP REP ALL Note REPEAT feature does not support VCD2 0 with PBC ON Play the tracks in random order For some discs when playing press RDM button on the front panel or on the remote control will play the tracks on the disc in shuffle order In shuffle on mode press RDM button again will exit shuffle playing Program play In program play mode you can play the track in your desired sequence To program play a disc please follow the next instructions For VCD when disc a Press PROG button on the remote control to enter the program edit interface 2 007 0 17 0337 00 1 07137 02 a y Ll i 5 17 0 4 05 5 0332 od 1 033 steel lU m sida LUGAR o ni n 32 n i b Press P A W cursor buttons on the remote control to select the items you want to program The items you selected will become highlight Input the number you want to program by numeric buttons 0 9 on the remote control Use cursor buttons to select PLAY on the bottom of the screen or press OK button on remote control to confirm And OPERATION the unit will play the tracks you programmed d If you want to clear the program select CLEAR on the screen and press OK on the remote control to confirm and the unit w
5. Make sure that the positive and negative terminals of the batteries are oriented as indicated 3 Close the cover e Battery One button cell lithium battery CR2025 Using the Remote Control Point the remote control towards the remote control signal receiver on the player front face Operation angle About 30 degree in each the direction of the front of the remote sensor OPERATION BASIC OPERATION Turn the unit on off When all the connection is finished press OMUT button on the front panel or on the remote control will turn the unit on When the unit is on hold press OMUT button or press to turn the unit off Fold down the front panel Press the release button on the front panel the panel will be folding down LT System menu Shortly press the volume button on the front panel of the unit or SELECT button on the remote control to enter into the setup menu BASS TREB BALA FADE TIME TIME SUBWOOF STEREO Then press I lt lt gt buttons on the front panel or on the remote control to select the item up or down then use the volume knob on the front panel or VOL buttons on the remote control to adjust the selected item TIME ON or OFF When TIME OFF the CLOCK will disappear STEREO ON or MONO SUBWOOF ON or OFF The subwoofer output jack is on the back of the unit NOTE In DVD AUX mode press the SELECT button you can see another more interface BRIGHTNES
6. VIOLET BLACK FRONT RIGHT SPEAKER GRAY FRONT RIGHT SPEAKER GRAY BLACK FRONT LEFT SPEAKER WHITE FRONT LEFT SPEAKER WHITE BLACK REAR LEFT SPEAKER GREEN REAR LEFT SPEAKER GREEN BLACK COND C5 LOCATIONS AND FUNCTION OF THE PLAYER Open the cover 8 33 a9 A 2 8 49 When front panel is folded down 22 I 03 1 Release button 13 MON LOU pick up phone 2 Volume knob when rotated 14 Push SEL when pressed 15 14 3 EQ a hang up phone 16 MODE 4 3 2 inch TFT display 17 CLOCK 5 1 Pll 18 USB SD cover 6 2 E 19 USB interface 7 3 OSD 20 Memory card interface 8 4 RPT 21 Remote Sensor 9 5 RDM 22 Disc slot 10 6 SUB T 23 gt eject 11 24 RST reset 12 BAND AMS PAIR 25 AV IN jack 26 MIC Microphone LOCATIONS AND FUNCTION OF THE REMOTE CONTROL 3 17 4 16 18 20 19 T 21 8 22 9 1 23 11 24 12 1 26 29 LOCATIONS AND FUNCTION OF THE REMOTE CONTROL 1 Press it to turn on the unit When the unit is on press it to turn the unit off MODE When the unit is on press it to select the different mode such as RADIO DVD USB SD AV IN mode BAND SYS In radio mode press it shortly to select the desired band such as FM2 FM3 AM1 and AM2 4 In case of menu mode the buttons served as cursor buttons to select item left right up down
7. unit to the factory radio mounting brackets Align the screw holes on the bracket with the screw holes on the unit and then tighten the screws 5x5mm on each side Note the outer trim ring sleeve and the metal strap are not used for method B installation USING THE DETACHABLE FRONT PANEL To Detach the Front Panel 1 Press the release 8 button then the front panel will be folded down Release button 2 To remove the front panel lift it up at a little angle from horizontal position then first pull out the right side and then pull out the left side s S ge IN right side Front Panel NYG x 3 For safekeeping store the front panel in the supplied protective case immediately after being removed Protective Case Front Panel To Install the Front Panel 1 To install the front panel first insert the left side into proper position then insert the right side into place 2 When the two sides fixed into place push the front panel into main unit 3 Note that if the front panel fails to lock in position properly pressing control button may not function and the display may be missing some segments Press the release button and then reinstall the front panel again Precautions when handling 1 Do not drop the front panel 2 Do not put pressure on the display or control buttons when detaching or re installing the front panel 3 Do not touch the contacts on the front pan
8. CONNEG IONS u uuu 10 LOCATIONS AND FUNCTION OF THE PLAYER 11 LOCATIONS AND FUNCTION OF THE REMOTE CONTROL 12 OPERATION i X 15 BASIC OPERAIIINuu u u 2 2 3 15 DVD OPERATION 2 16 USBPEAYOPERATION u uz u acs eee xu E 21 MEMORY CARD OPERATIONN J 22 RADIO OPERATION u uuu uuu 22 BLUETOOTH OPERATIQN i R 23 AV IN OPERATION i u cote u k Z Sm detects S mu s S mu s S 24 TROUBLE 25 zeige ue 27 o Features Compatible with PAL DVD Video CD and NTSC DVD Video CD This player can play discs recorded in either PAL or NTSC format L R stereo analog audio outputs for connection to existing head unit av inputs Video output is composite video Supplied remote handles multi function software multi language audio track subtitle multi angle etc plus all basic functions Use This Product Safely This set has been designed and manufactured to assure personal safety Improper use can result in electric shock or fire hazard The safeguards incorporated in this unit protect you if you observe the following procedures for installation use and servicing This unit doesnt contain any parts that can be repaired by t
9. NGUAGE SETUP When you open the language setup menu you will see the language setup page LANGUAGE SETUP OSD LANGUAGE AUDIO LANG SUBTITLE LANG MENU LANG You can change the OSD LANGUAGE AUDIO LANGUAGE SUBTITLE LANGUAGE MENU LANGUAGE among different languages The language options are different depending on your country or region 3 AUDIO SETUP When you open the AUDIO menu you will see the following picture AUDIO SETUP AUDIO OUT KEY AUDIO OUT Change among SPDIF OFF SPDIF RAW and SPDIF PCM KEY Change the tone within a certain range 4 VIDEO SETUP When you open the VIDEO menu you will see the following picture VIDEO SETUP BRIGHTNESS CONTRAST HUE SATURATION SHARPNESS You can adjust the value of the brightness contrast hue saturation and sharpness 5 SPEAKER SETUP When you open the SPEAKER menu you will see the following picture SPEAKER SETUP DOWNMIX FRONT DOWNMIX to set the DOWNMIX modes of LT RT STEREO and VSS FRONT to select between LARGE and SMALL OPERATION 6 DIGITAL SETUP When you open the DIGITAL menu you will see the following picture DIGITAL SETUP OP MODE DYNAMIC RANGE DUAL MONO OP MODE to set the operating modes for Dolby Digital decoder there are LINE OUT and RF REMOD to be selected DYNAMIC RANGE you can adjust the dynamic range between OFF 1 8 2 8 3 8 1 2 5 8 3 4 7 8 full DUAL MONO there are STEREO
10. OPEN COVERS AND DO NOT REPAIR YOURSELF REFER SERVICING TO QUALIFIED PERSONNEL WARNING REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING INTERFERENCE USE ONLY THE RECOMMENDED ACCESSORIES HIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION Region Management Information Region Management Information This Mobile DVD Player is designed and manufactured to respond to the Region Management Information that is recorded DVD disc If the Region number described on the DVD disc does not correspond to the Region number of this Mobile DVD Player this Mobile DVD Player cannot play this disc DISC NOTES Handling and Cleaning Dirt dust scratches and warping discs will cause wrong operation Do not place stickers or make scratches on discs Do not warp discs A disc should always be kept in its case when not in use to prevent from damage Do not place discs in the following places 1 Direct sunlight 2 Dirty dusty and damp areas 3 Near car heaters 4 On the seats or dashboard Disc Cleaning Use a dry soft cloth to wipe the surface If the disc is quite dirty using a soft cloth slightly dip with isopropyl rubbing alcohol Never use solvents such as benzine thinner or conventional record cleaners as they may mar the surface of the disc Note A disc may become somewhat scratche
11. PBC ON mode such as REPEAT RANDOM functions are unavailable DVD Setup In DVD mode when the disc is playing or in stop mode press SETUP button on the remote control to enter setup menu a When the cursor is on the topside use P buttons to move between the different pages such as SYSTEM SETUP LANGUAGE SETUP AUDIO SETUP VIDEO SETUP SPEAKER SETUP and DIGITAL SETUP b Press W button to move the cursor to the setup page below and then you can use W buttons to move between the different setup options Press P button to display the choice list for each setup option and then use W buttons and OK button to change your selection 1 SYSTEM SETUP When you open the setup menu you will see the system setup page at first see below OPERATION SYSTEM SETUP TV SYSTEM AUTO PLAY VIDEO TV TYPE PASSWORD RATING DEFAULT SYSTEM Change the TV SYSTEM among NTSC PAL and AUTO AUTO PLAY Change between ON and OFF When AUTO PLAY ON the unit will skip over the DVD menu to play automatically VIDEO Change among S VIDEO INTERLACE YUV TV RGB P SCAN YPBPR and PC VGA TV TYPE Change the TV TYPE among 4 3 PS 4 3 LB and 16 9 PASSWORD Change the PASSWORD lock or unlock the default PASSWORD is 0000 RATING Change the parental RATING among 1KID SAFE 2G 3PG 4 13 5PG R 6R 7NC 17 8GADULT DEFAULT Restore the system setup to the default setup 2 LA
12. S CONTRAST SHARTPNESS COLOR HUE RESET Then press 1 buttons on front panel or on the remote control to select the item up or down then use the volume knob on the front panel or VOL buttons on the remote control to adjust the Brightness Contrast Sharpness Color and Hue Remote sensor There is a remote sensor on the front panel You can point the remote control to the remote sensor and press functions keys on the remote control to control the unit Reset function Press the button on the front panel to fold down the panel then you Will see the RST button on the housing of the unit It must be activated with either a ballpoint pen or thin metal object The reset button is to be activated for the following reasons 1 Initial installation of the unit when all wiring is completed 2 All the function buttons do not work 3 Error symbol on the display Volume level adjustment Rotating the volume knob on the front panel clockwise or anticlockwise or pressing VOL buttons on the remote control to adjust the volume level When you adjust the volume the current value of the volume will be OPERATION displayed on the screen Pressing OMUT button on the front panel or MUTE button on the remote control will mute the sound Press it again will resume the sound Mode selection Press MODE button on the front panel or MODE on the remote control to select the desired mode to e
13. UNCTION OF THE REMOTE CONTROL 20 SLOW PAIR For some discs press to start slow forward function Press it to enter the pair function for Bluetooth operation 21 ZOOM CLR Press to allow the picture to be increased in size CLR button serves as back spaces key in Bluetooth operation 22 SELECT Press to enter into the system setup menu 23 SEEK 144 SEEK gt Press shortly to skip to the previous next track Press and hold it to activate fast reverse forward function In radio mode press it shortly to search the frequency backward forward manually Press and hold it to seek the frequency automatically 24 AUDIO VOL TR In DVD mode press shortly to display the audio information of the disc In DVD mode press and hold it to enter into EQ setting such as POP CLAS ROCK and OFF In other mode pressing the button is EQ function During the talking mode in Bluetooth operation press VOL TR to transfer the phone call between the mobile phone and the unit not every type of mobile phone supports 25 10 Digital selecting button for track cooperatively used with numeric buttons In Bluetooth mode press to input the gt icon 26 GO TO GOTO Disc search button used in media play mode cooperatively used with numeric buttons In Bluetooth mode press to input the icon Preparing the Remote Control Inserting the Batteries 1 Open the battery compartment cover 2 Insert the new batteries
14. ard SF changes according to the disc as follows DVD Normal play 1 23 1 3 1 4 1 5 31 6 gt 1 7 In slow motion state shortly press gt I on the remote control gt II on the front panel to resume the normal playback Skipping track Pressing gt gt i I lt lt buttons on the remote control 144 on the front panel during playback will skip to the next previous track When PBC playback control ON these buttons may be unavailable Note you can use the numeric buttons 0 9 and 10 button on the remote control to select the track directly DVD title menu amp Menu play 1 When playing a DVD disc pressing Title button on the remote control will stop the playback and return to the TITLE menu that is stored in DVD disc The disc will be played automatically and stop at menu picture 2 Press P A W cursor buttons on the remote control to move between the highlight bars in the menu 3 Press OK button on the remote control to confirm the selected item Note when playing a DVD disc you can press PBC button on the remote control to enter the menu play interface of the disc Then you can select the desired item to play Zoom function Allows the picture to be increased in size Press ZOOM button on the remote control to toggle scale among 1 2 3 4 1 2 1 3 and 1 4 When the scale is 1 4 press ZOOM again will exit zoom operation During zoom mode press 4 p W buttons to m
15. d although not enough to make it unusable depending on the way it is handled and conditions in the usage environment Note these scratches are not an indication of any problem with the player Label side up eo Q Do not touch c the underside a of the disc Q Wipe the disc from center toward the outside edge Preparing New Discs with Rough Spots A new disc may have rough edges on its inside and outside edges If a disc with rough edges is used the proper setting will not be performed and the player will not play the disc Therefore remove the rough edges in advance by using a ballpoint pen or pencil as shown on the right To remove the rough edges press the side of the pen or pencil against the inside and outside edges of the disc Rough spots on outside edge Rough spots on inside edge INSTALLATION Notes e Choose the mounting location where the unit will not interfere with the normal driving function of the driver e Before finally installing the unit connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly e Use only the parts included with the unit to ensure proper installation The use of unauthorized parts can cause malfunctions e Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle e Install the unit where it does not get in t
16. ds You can refer to the operation about your mobile phone delete the device that just searching for and repair again Answering Rejecting and Incoming Call When a call coming you can shortly press 77 button on the front panel of the unit or 2 button on the remote control to answer the call When a call coming you can shortly press Z button on the unit or 2 button on the remote control to reject e the incoming call Making and Outgoing Call Use 0 9 buttons on the remote control to enter the phone number you want to dial Then press button on the front panel of the unit or Z button on the remote control to call the number Note if you input the wrong number shortly press CLR button on the 24 remote control to clear it Press and hold CLR button to clear all the numbers You can also dial with the mobile phone directly Transfer the Call between Mobile Phone and the Unit During the talking mode you can press VOL TR button on the remote control to transfer the phone call between the mobile phone and the unit Note If you transfer the call to mobile phone the mute of the present mode will be released at the same time Bluetooth Audio A2DP Function he unit supports Bluetooth audio function If the mobile phone can play audio or video files and support A2DP when the paring is ok you can select an file and set to A2DP function on your mobile phone is up to the mobile phone t
17. e antenna control wire is not connected B Connect the wire correctly TROUBLE SHOOTING The sound picture skips on a DVD VCD CD MP3 gt The disc is scratched or dirty B Clean the disc A track will not play gt Random play has been selected B Turn off random play A VCD cannot be played using menus gt The VCD disc being played is not compatible with PBC B Menu playback is available only with VCD discs recorded with PBC The viewing angle cannot be changed gt The DVD disc being played does not contain the recording of more than one angle B The viewing angle cannot be changed when the DVD disc being played does not contain the recording of more than one angle You are attempting to switch the angle in a DVD section where more than one angle is not recorded B More than one viewing angle may be recorded only in limited sections in a disc 26 SPECIFICATIONS GENERAL Power Supply Requirements Maximum Output Power Current Drain RADIO Frequency Coverage Sensitivity S N 30dB Image Rejection Stereo Separation Frequency Coverage Sensitivity S N 20dB Image Rejection DVD Signal system Discs played Monitor Screen Size Note 12 Volts Negative Ground 4x80 watts 15 Ampere max FM 87 5 to 107 9 MHz USA 87 5 to 108 MHz Europe Asia 10 dBu gt 45dB gt 25dB AM 530 to 1710 kHz USA 022 to 1620 kHz Europe Asia 36 dBu 245 dB Composi
18. el or on the main unit body It may result in poor electrical contact 4 If any dirt or foreign substances adhered on the contacts they can be removed with a clean and dry cloth o Do not expose the front panel to high temperatures or direct sunlight in anywhere 6 Keep away any volatile agents e g benzene thinner or insecticides from touching the surface of the front panel 7 Do attempt to disassemble the front panel CONNECTIONS Brake Wire Pink Rearview Wire Brown CL Rearview input Green jack Yellow n m i 1 SUBWOOFER OUT GREEN 3 gt r x ZA ISO SOCKET h L h semasa imm 1 FI 4 1 I 1 fea fre L ro 1 A f ha j HHI jid i H N Th A NC a iy 1 x F I LA T g d 1 t n Z FUSE 15A K p NT H x 4 E ee U W i 1 F hy 1 I a i l Meu 1 d xl om a m gt F ls as RADIO ANTENNA VIDEO OUT YELLOW AUDIO OUT R RED AUDIO OUT L WHITE Connector A 1 N C 2 N C 3 N C 4 MEMORY 12V YELLOW 5 AUTO ANTENNA OUTPUT BLUE 6 N C 7 12V TO IGNITION KEY RED 8 GROUND BLACK Connector B 1 REAR RIGHT SPEAKER VIOLET REAR RIGHT SPEAKER
19. he different mobile phone has the different define When in A2DP mode the 1 Pil E MUT or MUTE EQ LOU VOL and SELECT buttons are functional Use 1 1 buttons on the unit on the remote control to choose the previous next track Press l button to pause the play Press B button to stop the play AV IN OPERATION On the front panel of the unit there is an AV IN jack When you connected the audio video device from the jack press MODE button on the remote control or MODE on the front panel to select AV IN mode TROUBLE SHOOTING If it appears that your DVD unit is faulty first consult this checklist It may be that something simple has been overlooked Under no circumstances should you try to repair the player yourself as this will invalidate the warranty Only qualified service personnel can remove the cover or service this player The power does not turn on gt lead wires are not connected properly to the connectors B sure the connection is correct gt The fuse has blown B After checking for short circuits in the wires replace the fuse with one having the same rating gt The internal processor is not working due to noise or other factors m Press the reset button to reset the unit to factory defaults The remote control does not work The unit does not operate even when the correct buttons on the remote control are pressed gt Battery capacity is low B Instal
20. he driver s way and cannot injure the passenger if there is a sudden stop like an emergency stop e f installation angel exceeds 30 from horizontal the unit might not give its optimum performance 30 e Avoid installing unit where it would be subject to high temperature such as from direct sunlight or from hot air from the heater or where it would be subject to dust dirt or excessive vibration DIN FRONT REAR MOUNT This unit can be properly installed either from Front conventional DIN Front mount or Rear DIN Rear mount installation utilizing threaded screw holes at the sides of the unit chassis For details refer to the following illustrated installation methods TAKE OUT SCREW BEFORE INSTALLATION Before install the unit please remove the two screws Take out screw before installation N V wF ae W E FRONT MOUNT Method Installation Opening This unit can be installed in any dashboard having an opening as shown below Installing the unit Be sure you test all connections first and then follow these steps to install the unit 1 Make sure the ignition is turned off and then disconnect the cable from the vehicle battery s negative terminal 2 Disconnect the wire harness and the antenna 3 Press the release button on the front panel and remove the control panel see the steps of removing the front panel 4 Lift the top of the outer trim ring t
21. he user When Driving Keep the volume level low enough to be aware of road and traffic conditions When Car Washing Do not expose the product to water or excessive moisture This could cause electrical shorts fire or other damage When Parked Parking in direct sunlight can produce very high temperatures inside your vehicle Give the interior a chance to cool down before starting playback Use the Proper Power Supply This product is designed to operate with a 12 volt DC negative ground battery system Protect the Disc Mechanism Avoid inserting any foreign objects into the slot of this player Failure to observe this may cause malfunction due to the precise mechanism of this unit Use Authorized Service Centers Do not attempt to disassemble or adjust this precision product Please refer to the Service Center list included with this product for service assistance For Installation The unit should be installed in a horizontal position with the front end up at a convenient angle but not more than 30 SAFETY INFORMATION CAUTION MOBILE DVD PLAYER ISA CLASS LASER PRODUCT HOWEVER THIS MOBILE DVD PLAYER USES A VISIBLE INVISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED BE SURE TO OPERATE THE MOBILE DVD PLAYER CORRECTLY AS INSTRUCTED USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE DO NOT
22. hen pull it out to remove it 5 The two supplied keys release tabs inside the units sleeve so you can remove it Insert the keys as far as INSTALLATION they will go with the notches facing up into the appropriate slots at the middle left and right sides of the unit Then slide the sleeve off the back of the unit 1 Front Panel 2 Outer Trim Ring 3 Sleeve 4 L key 5 R key 6 Mount the sleeve by inserting the sleeve into the opening of the dashboard and bend open the tabs located around the sleeve with a screwdriver Not all tabs will be able to make contact so examine which ones will be most effective Bending open the appropriate tabs behind the dashboard to secure the sleeve in place 1 gt 1 Dashboard 2 Taps Reconnect the wire harness and the antenna and be careful not to pinch any wires or cables Slide the unit into the sleeve until it locks into place To further secure the unit use the supplied metal strap to secure the back of the unit in place Use the supplied hardware Hex Nut M5mm and Spring Washer to attach one end of the strap to the mounting bolt on the back of the unit If necessary bend the metal strap to fit your vehicle s mounting area Then use the supplied hardware Tapping Screw 5x25mm and Plain Washer to attach the other end of metal strap to a solid metal part of the vehicle under the dashboard This strap also helps ensure proper electr
23. ical grounding of the unit Note to install the short threading terminal of the mounting bolt to the back of the unit and the other long threading terminal to the dashboard 1 Metal Strap 2 Mounting Bolt 3 Hex Nut 4 Spring Washer 5 Tapping Screw 6 Plain Washer 10 Reconnect the cable to the vehicle battery s negative terminal Then replace the outer trim ring and install the unit s front panel see the steps of installing the front panel Removing the unit 1 Make sure the ignition is turned off then disconnect the cable from the vehicle battery s negative terminal 2 Remove the metal strap attached the back of the unit if attached INSTALLATION 3 Press the release button to remove the front panel 4 Lift the top of the outer trim ring then it out to remove it 5 Insert both of the supplied keys into the slots at the middle left and right sides of the unit then pull the unit out of the dashboard DIN REAR MOUNT Method B If your vehicle is a Nissan Toyota follow these mounting instructions Use the screw holes marked T Toyota N Nissan located on both sides of the unit to fasten the unit to the factory radio mounting brackets supplied with your vehicle Screw Holes marked T N Screw Factory Radio 1 Mounting Bracket OS ScreWw lt Dashboard or Console To fasten the
24. ill cancel the programmed play For DVD disc The operation is the same as VCD CD operation Press PROG button on the remote control the following media play window will be shown on the screen ae om Aye Ge T d SEE 1 WB Br 8 13 2 10 14 3 7 I I5 E 17771 82 NS Note When playing tracks you programmed press PROG button to enter the program interface pressing PROG for the second time will exit the menu and the unit will resume normal play When you want to return to program play press PROG to enter program interface and select PLAY then press OK button on the remote control to confirm it will begin program play For JPEG disc When playing a JPEG disc press PROG button to select the different play mode of the photos Goto Function FOR DVD Press GO TO button on the remote control the screen will display the following message Use the numeric buttons to input the desired Title Chapter or Time then press OK button to confirm FOR VCD WITH PBC You can input the Track and Time then press OK R to confirm Menu Playback of VCD SVCD For some VCD or SVCD discs there is a menu in order to select the desired contents This menu is called PBC Playback Control menu Press PBC button on the remote control to change between PBC ON and PBC OFF on the disc In
25. l new batteries gt Some operations are disabled in specific states B Enter the correct mode The disc can not play gt Disc is of poor quality or damaged or not clean m Clean or replace the disc with one of higher quality gt The disc installed is not supported by the unit m Examine the disc type gt disc installed is not compatible 25 with the video system B Replace the disc with one compatible with your video system The desired source is not selected although you press the MODE button gt optional unit required to listen to each source is not connected yet B Connect the optional unit correctly gt The reset button is not pressed yet although the optional unit has been connected to the unit B Press the reset button Nothing happens when the button are pressed gt optional unit required to listen to each source is not connected yet B Connect the optional unit correctly gt The computer chip in the unit is not functioning normally B Press the reset button on the housing of the unit The sound quality is poor or distorted gt One of the speaker wires is being pinched by a screw in the car B Check the speaker wiring gt The speakers are not wired correctly B Reconnect the speaker wires so that each output terminal is connected to a different speaker Radio reception is poor gt The antenna is not extended B Pull the antenna out all the way gt Th
26. njoy Such as DVD radio USB SD AUX mode Loudness Press MON LOU button on the front panel shortly to switch loudness function on and LOUD will appear on the LCD Press it shortly again to release this function and LOUD will disappear Clock set Press CLOCK button shortly on the front panel to display the clock Then press and hold CLOCK button for several seconds the hour will be selected then rotate the volume knob on the front panel to change the value and press volume button to confirm The cursor will resume to the minute Then use the volume knob on the front panel to change the value of the minute and press volume button to confirm Equalization In radio mode press AUDIO button on the remote control or EQ button on the front panel to turn on equalization function and to select desired audio mode such as POP CLAS ROCK and OFF In DVD mode press and hold the button is EQ function Brake function If the brake wire pink wire isn t connected to the ground when driving the picture will not be shown on the screen in DVD AUX mode for safety purpose Only the audio will be heard Note Only when parking the DVD AUX picture can be seen on the screen When driving the warning information will be displayed Rearview function On the back of the unit there is a yellow jack for rearview video in When backing a car the picture of the screen will switch to rearview picture a
27. one of the radio preset buttons numeric buttons 1 6 on the remote control or on the front panel to retrieve a station which had been stored in the memory in advance and the chosen frequency will be shown on display Automatic Memory Storing amp Program Scanning 1 Program scanning Shortly press AMS button on remote control to scan preset station 2 Automatic memory storing Press and hold press AMS button on remote control or BAND AMS button on the front panel for about several seconds the radio searches from the current frequency and checks the signal strength until one cycle search is finished And then stations are stored into the preset number button in turn according to the strength of the stations When auto search is finished it will enter into preset scan mode automatically Note Press and hold 1 6 numeric buttons on the remote control for about several seconds will store the current station to the current numeric key position 23 Local Distant Press LOC button on the remote control to select between local and distant stations Local setting for reception of strong station and a distant setting for reception of weaker stations Mono Stereo Press ST button on remote control or hold press MON LOU button on the front panel to select mono or stereo mode You can sometimes improve reception of distant stations by selecting mono operation Switching Area USA EUR In radio mode press and hold
28. ove the picture left right up down Multi subtitle language function For DVD Press Sub T button on the remote control or SUB T button on the front panel during playback The corresponding information will be shown on the screen Each time the button is pressed the subtitle language changes in the sequential order OPERATION Note The language is different according to the disc Some discs only contain one subtitle language Multi angle function For DVD Press ANGLE button on the remote control during playback The corresponding information will be shown on the screen Each time the button is pressed the angle changes in sequential order Notes a The angle number is different according to the disc b The function only works for discs having scenes recorded at different angles Multi audio Language function Press AUDIO during playback The corresponding information will be shown on the screen Each time the button is pressed the audio soundtrack language changes on sequential order Notes The language number is different according to the disc Some discs only contain one soundtrack language Repeat play When you want to repeat playing the whole disc or track or a chapter in the disc Press RPT button on the remote control or on the front panel repeatedly to select different repeat mode For different kinds of discs pressing RPT button has different effects For example
29. sponding operation please refer to the DVD OPERATION 22 RADIO OPERATION Switching to Radio Mode Press MODE button on remote control or MODE on the front panel start radio mode The band frequency station clock and other information will display on the display RADIO 87 50 BAND STATION DISC Selecting the Frequency Band Press BND button on remote control or BAND AMS button on the front panel to select desired band The reception band will change in the following order MM FM 2 gt gt AM1 gt AM2 Selecting Station Press r lt lt gt buttons on the remote control or press I 1 on the front panel shortly to adjust the frequency manually Hold Press 1 on the remote control or hold press 1 on the front panel for fast tuning The frequency is updated correspondingly on display Setting Memory Press radio preset buttons numeric buttons 1 6 on remote control or the front panel to preset stations at radio mode Each band can store six preset stations The stations might be FM1 FM2 FM3 AM1 and AM2 band The operation is as below OPERATION 1 2 Store in Memory Press and hold desired radio preset buttons numeric buttons 1 6 on the remote control or on the front panel for several seconds the memory icon will be shown display and the current listening station will be stored into the number button Retrieve a Preset Station Press any
30. the volume button on the front panel of the unit or SELECT button on the remote control then you can use the volume knob on the unit or VOL buttons on the remote control to set AREA USA or AREA EUR frequency spacing BLUETOOTH OPERATION Switching to TV Mode Press MODE button on remote control or MODE on the front panel enter Bluetooth mode Preparing for Operation 1 When use Bluetooth please make sure the mobile phone supports Bluetooth function 2 For the different kind of mobile phone Bluetooth emissive power has some difference To get the best conversation quality it is commended that the distance between the mobile phone and the unit is within 3m And please don t put any metal object or any obstacle between the path of the mobile phone and the unit OPERATION Pairing and Connection 1 Pressing PAIR button on the front panel of the unit or on the remote control to enter paring mode On the mobile phone select the Bluetooth set up Please refer to the instruction manual of your mobile phone on how to operate Bluetooth 2 Select the Bluetooth device in the list on your mobile phone and press enter and the unit will ask for a password which is 0000 After entering 0000 press enter and the unit will display CONNECTED 3 When successful connected the Bluetooth sign will be displayed in red color on LCD 4 If pairing failed try to pair again within several secon
31. tive video 1 0Vp p 750 1 DVD VIDEO disc 5 12 cm single sided single layer 5 12 cm single sided double layer 2 Compact disc CD DA CD R CD RW MP3 3 12 cm VIDEO CD 3 2 Specifications and design are subject to modification without notice due to improvements in technology 24
32. turn to DVD mode again the unit will resume playing from the point that just interrupted USB PLAY OPERATION On the front of the unit when you open the USB cover you will see an USB interface An USB device can be connected through this interface When you connect an USB device through the interface the unit will search OPERATION the files in the USB driver and start to play automatically If in other mode you can also press MODE button to select USB mode When playing the audio video photo files in the device the operation is the same with DVD operation described above NOTE When in USB play mode be sure not to remove the USB driver from the USB interface When stop USB play you can remove the USB drive after remove USB driver from the unit When connecting an player and there has normal battery in the player non rechargeable battery you should remove the battery from the MP3 player then connect it to the USB interface Otherwise it may cause battery burst MEMORY CARD OPERATION On the front of the unit when you open the USB cover you will see a memory card interface You can insert a memory card into the interface When you insert a memory card in the memory interface the unit will search the files in the card and start to play automatically The operation is the same with the DVD operation described above If in other mode you can also press MODE button to select Card mode The corre
33. utomatically and the unit will play the video information that inputted from the yellow rearview video in jack DVD OPERATION Loading ejecting a disc When the front panel folding down you will see the disc slot and eject button on the housing of the unit When there is not any disc on the slot insert the disc with printed side facing up into the disc slot Then let the front panel up to normal position The player will start playback automatically Press 4 button to eject the disc Stopping playback Press W button on the front panel or B on remote control for one time to pre stop the playback When I button on the front panel or on the remote control is pressed normal playback will continue Press B or E button twice to stop the playback completely OPERATION Pausing play Shortly press on the front panel or gt Il on the remote control during playback to stop playback temporarily Shortly press gt Il again will return to the normal playback Rapid forward rapid reverse Hold press 1 144 on the front panel or hold press I on the remote control during playback Each time the button is hold pressed the speed of rapid forward reverse changes according to the disc as follows DVD VCD CD MP3 Normal play X2 X4 X8 ael Slow motion playback for DVD only Press Slow on the remote control during play Each time the button is pressed the speed of slow forw
Download Pdf Manuals
Related Search