Brinkmann Max Million III
Contents
1. 800 2301 0_INSTR MAXMILL3 9 4 03 10 07 AM x BRINKMANN READ AND FOLLOW ALL WARNINGS AND INSTRUCTIONS IN THIS MANUAL TO AVOID PERSONAL INJURY OR PROPERTY DAMAGE 3 000 000 ihe SPOTLIGHT OWNER S MANUAL amp OPERATING INSTRUCTIONS 4 800 2301 0_INSTR MAXMILL3 9 4 03 10 07 AM Pag 800 2301 0_INSTR MAXMILL3 9 4 03 10 07 AM Pag IMPORTANT SAFETY WARNINGS A READ AND FOLLOW ALL SAFETY WARNINGS AND INSTRUCTIONS IN THE OWNER S MANUAL BEFORE OPERATING SPOTLIGHT WARNING e Never place spotlight face down when light is on or is still hot from recent use Doing so could burn ignite surfaces such as seats carpeting etc and cause major property damage Always turn spotlight off and unplug from power source when not in use To prevent serious damage to eyesight never look into spotlight when light is on Do not shine light into the face of someone else Do not touch lens of spotlight when light is on or if it was recently on The lens will be hot and could cause serious burns e Keep battery clips or cigarette lighter plug dry and out of water at all times Do not place spotlight in water e Do not allow children to handle or operate this spotlight Do not use this product for other than its intended use Do not operate in close proximity of combustible or flammable materials Do not attempt to operate spotlight if cord plug bulb or any part of the spotlight is damaged or corroded USE CA2. authorized employee of The Brinkmann Corporation This warranty does not cover surface scratches or weathering as this is considered normal wear e Warranty service is limited to repair or replacement of spotlights which prove defective under normal use and which upon examination shall indicate to Brinkmann s satisfaction they are defective If Brinkmann confirms the defect and approves the claim Brinkmann will elect to repair or replace the spotlight as covered by the terms of this warranty This warranty extends to the original purchaser only and is not transferable or assignable to subsequent purchasers The Brinkmann Corporation requires reasonable proof of purchase Therefore we strongly recommend that you retain your sales receipt or invoice To obtain repair or replacement of your Q Beam Max Million II Spotlight under the terms of this warranty please call Customer Service Department at 1 800 527 0717 for a Return Authorization Number and further instructions A receipt will be required A Return Authorization Number must be clearly marked on the outside of the box Spotlights returned to Brinkmann must include your name address and telephone number Please make sure the light is properly packed postage prepaid and insured Brinkmann cannot be responsible for any spotlights forwarded to us without a Return Authorization Number EXCEPT AS ABOVE STATED THE BRINKMANN CORPORATION MAKES NO OTHER EXPRESS WARRANTY THE IMPLIED WARRA
3. NTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO 1 YEAR FROM THE DATE OF PURCHASE SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU ANY LIABILITY FOR INDIRECT INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM THE FAILURE OF THE Q BEAM MAX MILLION II SPOTLIGHT TO COMPLY WITH THIS WARRANTY OR ANY IMPLIED WARRANTY IS EXCLUDED CUSTOMER ACKNOWLEDGES THAT THE PURCHASE PRICE CHARGED IS BASED UPON THE LIMITATIONS CONTAINED IN THE WARRANTY SET OUT ABOVE SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE 140 2301 0 Owner s Manual for Model 8 03 800 2301 0
4. UTION AND COMMON SENSE WHEN OPERATING YOUR SPOTLIGHT FAILURE TO ADHERE TO THE SAFETY WARNINGS AND GUIDELINES IN THIS MANUAL COULD RESULT IN BODILY INJURY OR PROPERTY DAMAGE SAVE THIS MANUAL FOR FUTURE REFERENCE Tips to Avoid Damage to o o vil dura m Your 0 Beam Spotlight Thelens is made of optical quality tempered glass As with all glass avoid dropping or sharp impact on spotlight Do not allow the hot lens to come in contact with water or materials subject to heat damage This spotlight is weather resistant It is not waterproof Do not use the spotlight under water or store outdoors Only use a Brinkmann 12 volt halogen bulb that is designed for your Q Beam spotlight Use of any other bulb may result in poor performance and may damage your spotlight e After months of use cigarette lighters can build up corrosion that may prevent your Q Beam spotlight from making good contact It may be necessary to clean the inside of your cigarette lighter receptacle with a fine emery cloth Before cleaning receptacle remove the fuse to prevent it from shorting out 4 800 2301 0_INSTR MAXMILL3 9 4 03 10 07 AM Pag OPERATING INSTRUCTIONS A READ AND FOLLOW ALL SAFETY WARNINGS AND INSTRUCTIONS IN THE 0WNER S MANUAL BEFORE OPERATING SPOTLIGHT Step 1 To activate spotlight plug the cigarette lighter adapter into a cigarette lighter receptacle Move switch to ON Ay WARNING Never place spotlight fac
5. del 802 1724 1 Black Model 802 1725 1 Green Camo Pigtail Adapters Pigtail adapter with battery terminal clips allow Q Beam spotlights with cigarette lighter plug to operate directly from a 12 volt battery Model 802 1704 0 2 Ft Cord Model 802 1705 0 10 Ft Cord Lighter Plug Extension Cord Features a 15 ft cord with a cigarette lighter plug and receptacle Model 802 1706 0 SS gt sd Replacement Bulb 12 volt halogen bulb is an original replacement for 0 Beam Max Million II spotlight Model 802 1748 0 Max Million M Spotlight LOOK FOR THESE ACCESSORIES AT YOUR LOCAL RETAILER WHERE Q BEAMS ARE SOLD OR ORDER DIRECT BY CALLING 1 800 468 5252 800 2301 0_INSTR MAXMILL3 9 4 03 10 07 AM Pag 800 2301 0_INSTR MAXMILL3 9 4 03 10 07 AM Pag 2003 The Brinkmann Corporation Dallas Texas 75244 U S A www brinkmanncorp com 1 VEAR LIMITED WARRANTY For 1 year from date of purchase The Brinkmann Corporation warrants the Q Beam Max Million II Spotlight against defects due to workmanship or materials to the original purchaser The Brinkmann Corporation s obligations under this warranty are limited to the following guidelines This warranty does not extend to the bulb This warranty does not cover spot lights that have been altered or damaged due to normal wear abuse improper maintenance improper use disassembly of parts and or attempted repair by anyone other than an
6. e down when light is on or is still hot from recent use Doing so could burn ignite surfaces such as seats carpeting etc and cause major property damage Always turn spotlight off and unplug from power source when not in use Step 2 To deactivate move switch to OFF and unplug from power Source Only use a Brinkmann halogen bulb that is designed for the 0 Beam Max To Replace Bulb Million T spotlight as a replacement Use of any other bulb may result in poor performance and may damage your spotlight IMPORTANT Do not touch the glass part of bulb with fingers as natural oils affect the life and performance of bulb Handle bulb by metal end only Rear Housin Step 1 Disconnect spotlight from power source Reflector Step 2 Remove the two screws from top and bottom of front housing see Figure 1 Step 3 Lay the spotlight face lens down on a flat surface Step 4 Holding the front housing secure slowly lift the rear housing off being careful not to pull wire connections inside Make sure the reflector is inside the front housing as shown in Figure 2 Do not touch the inside of reflector NOTE The glass lens is not attached to front housing Use care when disassembling to avoid breaking lens J Housing Lens FIGURE 1 800 2301 0_INSTR MAXMILL3 FIGURE 3 FIGURE 4 9 4 03 10 07 AM Pag Step 5 Step 6 Step 7 Step 8 Step 9 Step 10 Step 11 Ste
7. p 12 Connector FIGURE 2 Disconnect bulb wire from connector by holding the connector firmly with fingers then pulling bulb wire straight out as shown in Figure 2 Spread the wire retainer apart and lift up as illustrated in Figure 3 Pull bulb straight out from the reflector mounting plate To install new bulb grasp the bulb from the metal end D0 NOT TOUCH THE GLASS PART and insert into the reflector mounting plate Align the slots in the bulb base with those in the reflector mounting plate Replace wire retainer by spreading ends apart while pressing down Push ends together so they catch on the reflector mounting plate Reconnect the bulb wire to the connector as illustrated in Figure 4 To reassemble spotlight leave the front housing face lens down on a flat surface with the reflector in the front housing Insert the rear housing into the front housing of the spotlight Replace the two screws that were removed in Step 2 Do not over tighten screws Replacement bulbs and accessories may be purchased from The Brinkmann Corporation Consumer Sales Department by calling 1 800 468 5252 4 800 2301 0_INSTR MAXMILL3 9 4 03 10 07 AM Pag Q BEAM ACCESSORIES Rechargeable Battery Pack With Carrying Case 12 volt rechargeable battery pack adds total mobility to your Q Beam Includes cigarette lighter receptacle 120 volt charging transformer and a heavy duty woven nylon carrying case with shoulder strap Mo
Download Pdf Manuals
Related Search