Microlab iDock130
Contents
1. ct and in the operating instructions should be adhered to 4 Follow instructions All operating and usage instructions should be followed 5 Installation Install the product in accordance with the manufacturers instructions 6 Power sources This product should be operated only from the type of power source printed on the label marking found on 10 11 12 13 14 15 16 17 18 19 the product If you are not sure of the type of power supply in your home consult your product dealer or local power company Grounding or polarization the product is not required to be grounded Ensure the plug is fully inserted into the wall outlet or extension cord receptacle to prevent blade or pin exposure Some versions of the product are equipped with a power cord fitted with a polarized alternating line plug a plug having one blade wider than the other This plug will fit onto the power outlet in only one direction This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should still fail to fit contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the polarized plug When using an extension power supply cord or a power supply cord other than that supplied with the appliance it should be fitted with the appropriate molded plugs and carry the safety approval allowed in your country Power cord protection Power supply cords s2. e LINE IN becomes the default input selection Any digital audio playback devices can be connected via this 3 5mm stereo interface Note When using iPod please install the base adaptor of your respective iPod player version into the common base of the system R gt Remote control illustration Functions X Power ON Off button product goes to standby in Off mode INPUT Depress to select between line input or iPod interface MENU Revert to iPod s previous menu A Previous menu w Next menu ENTER Confirm selected menu k4 Previous song pp Next song VOL Volume adjustment level Pll Play or Pause the playback RESET Depress to revert volume to factory default settings Remote control All specification and information are subject to changes without further notice 4
3. hould be routed so that they are not likely to be walked on kinked or pinched by items placed on or against them paying particular attention to cords from the plugs multiple sockets and the point where they exit from the appliance Overloading Do not overload wall outlets extension cords or multiple sockets as this can result in a risk of fire or electric shock Ventilation The product must be properly ventilated Do not place the product on a bed sofa or other similar surface which will buildup the temperature Do not cover the product with any items such as tablecloths newspapers etc Heat The product should be situated away from heat sources such as radiators heat registers stoves or other products including amplifier which produce a lot of heat No naked flame sources such as lighted candles should be placed on the apparatus Wall or ceiling mounting The product should be mounted to a wall or ceiling only as recommended by the manufacturer Water and moisture To reduce the risk of fire or electric shock do not expose the product to train dripping splashing or excessive moisture such as in a sauna or bathroom Do not use this product near water for example near a bathtub washbowI kitchen sink laundry tub in a wet basement or near a swimming pool etc Object and Liquid entry Never push objects of any kind into this product through openings as they may contact dangerous voltage points or short circuit parts that could resu
4. ions and foreign objects on the interfaces No Sound Ensure the system is plugged in and your iPod is turned ON and a music track is selected and played Depress the Play Pause button on the remote control Increase the volume level Remove your iPod from the iDock and wait briefly before reinserting again You might need to do this for several times Ensure your iPod is running with compatible software No sound and your iPod is not charging No sound after quickly undocking or docking your iPod Ensure the power cable is correctly plugged into the wall s AC socket Ensure the iPod is firmly seated on the iDock Remove your iPod from the iDock and wait for 5 seconds Next reinsert the iPod to the iDock Unplug the power cable for 1 minute and the reinsert it again This will reset the system Your iPod does not respond to the iDock remote control buttons shown Remove your iPod from the iDock and pause briefly before reinserting You might need to repeat this several times Try using the remote control from different locations If it works somewhere else then strong lighting or other room ambience might be affecting the Infrared signal Ensure no obstructions are in between the Infrared sensor and the remote control Wipe off any dirt or oil stains on the lens of the remote control Ceck the remote control batteries and ensure the cell positive side is facing up in the c
5. ital audio playback source with 3 5mm stereo socket AC power source 100 to 240V Power adaptor iDock Rear panel Video outputs J S Video or Composite O CR Multimedia Speakers To any amplified source or speakers D gt TV or projection screen Basic connections All specification and information are subject to changes without further notice 3 Re Product connection and operation 1 Product connection a Connect the LINE OUT of iDock with the audio signal input port of the amplifier b Connect the LINE IN of iDock with the audio output port of the audio players e g DVD player or PC etc c Connect the S VIDEO OUT Composite OUT of the iDock with the TV or LCD respective video input ports d Connect the power adaptor s DC plug into the iDock DC 9V socket and the other end into the wall or AC power supply 2 Operation a Turn on the AC power supply The Volume dial LED remains off and ensure the Volume dial remains at the lowest point to prevent speaker damage from sudden volume spike b Turn the volume dial or press the 9 ST BY on the remote control to turn on the product The blue luminous ring LED is lighted 3 Input selection With the iPod docked the audio output is from the iPod interface When there is no iPod player connected th
6. lt in a fire or electric shock Never spill liquid of any kind on the product Do not place any object containing liquid on top of the product Cleaning Unplug the product from the wall outlet before cleaning The cabinet of subwoofer may be cleaned by dusting with a dry cloth If you wish to use an aerosol cleaning spray do not spray directly on the cabinet spray onto the cloth Be careful not to contact the drive units Attachments Do not use attachments not recommended by the product manufactures as they may cause hazards Accessories Do not place this product on an unstable cart stand tripod bracket or table The product might fall and cause serious injury to a child or adult and damage the product Use only with a cart stand tripod bracket or table recommended by the manufacturer or sold with the product Any mounting of the product should follow the manufacturer s instructions and should use a mounting accessory recommended by the manufacturer Moving the product A product and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the product and cart to overturn Unused periods The power cord of the appliance should be unplugged from the outlet during lightning storms or when 1 RS Troubleshooting Frequently Asked Questions FAQ Solutions Your iPod does not dock properly Ensure the dock insert is correct for the iPod type Remove the iPod and check for obstruct
7. microlab microlab ATE ror line Eat iDock100 User s Manual Microlab Technology Company Limited Nees Docking Station for iPod All other brand and product names are trademarks of their respective holders Actual contents may differ slightly from those shown in Prior to first use please read the manual carefully print All specifications and designs are subjected to changes without any prior notice fe Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Caution TO reduce the risk of electric shock do not dismantle the product and do not expose the product to rain or moisture No user serviceable parts inside Refer servicing to qualified personnel only Explanation of Graphical Symbols The lightning flash within an equilateral triangle is intended to alert you to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute an electric shock to person or persons A The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance servicing instructions in the literature accompanying the product WARNINGS 1 Read Instructions All the safety and operating instructions must be read before the product is operated 2 Retain Instructions The safety and operating instructions should be kept for future reference 3 Heed warnings All warnings on the produ
8. of this device or its compliance with safety and regulatory standards All specification and information are subject to changes without further notice 5 the product is left unused for a long period of time 20 Servicing Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel 21 Replacement parts When replacement parts are required ensure the service technician had used replacement parts specified by the manufacturer or have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other hazards 23 Mains fuses For continued protection against fire hazard use fuses of the correct type and rating The correct fuse specification for each voltage range is marked on the product 24 Do not turn up the volume while listening to a section with very low level inputs or no audio signals If you do the speaker may be damaged when a peak level section is suddenly played 25 The only means of completely disconnecting the product from the power supply is by removing the power cord from the wall outlet or the product Both the wall outlet or the product s power cord must remain freely accessible at all times while the product is in use E 26 The AC power socket shall be installed near the equipment and shall be easily accessible gt Introduction Congratulations
9. ompartment tray Try replacing with fresh batteries e Upgrade the software inside the iPod For more details please refer to page 7 To check for iPod Compatibility If the problem still exists please contact the distributor or seek professional advice All specification and information are subject to changes without further notice 6 Technical Information Specification Product Frequency response Distortion Separation DC IN Audio inputs iPod interface Audio interface Line out Video out Volume Power LED AC Power Product size WxHxD Product weight Made for iPod 20Hz 20kHz lt 0 05 1V RMS 1kHz gt 70dB DC 9V 800mA iPod 30 pins 3 5mm stereo plug Most iPods types except for iPod shuffle iPhone Support any audio playback devices with 3 5mm stereo plug 2x RCAinterfaces S VIDEO Composite RCA Rotary dial Blue LED 100 240V 151x35x97mm 0 68kg iPod 20GB 30GB 40GB 60GB only iPod photo 40GB 60GB only iPod color 30GB 60GB only iPod video 30GB 60GB 80GB only iPod mini 4GB 6GB only iPod nano 1GB 2GB 4GB 8GB only iPod not included in package iPod is a trademark of Apple Inc registered in the U S and other countries Made for iPod means that an electronic accessory has been designed to connect specifically to iPod and has been certifed by the developer to meet Apple performance standards Apple is not responsible for the operation
10. on your choice of the iPod iDocking System from Microlab It is specially designed for iPod or iPhone use With high quality acoustic speaker system design this product will bring your music out of private entertainment in your iPod to your living room Features e Besides standard iPod input one set of auxilliary audio input is provided to be connected to the other digital audio playback devices e Automatically charge the iPod battery when docked e Comes with composite video and S VIDEO output interfaces to output the iPod videos to bigger screen e Full function infrared remote control e External AC power adaptor available for global voltage requirement Please ensure package contents are correct e iPod iDocking System 1pc e Power adaptor 1pc 3 5mm 3 5mm signal cable 1pc e 2RCA 2RCA audio signal cable tpe e RCA RCA video signal cable 1pc e Infrared remote control 1pc e Type AAA batteries 2pcs e User s manual 1pc ote Place the system on a firm and level surface The speaker drivers are magnetically shielded for Note PI th t fi d level surf Th ker dri tically shielded fi placement near TV LCD monitors without any video interferences All specification and information are subject to changes without further notice 2 Be Product connection and operation r D microlab iPod docking interface Volume dial EDI U Y iDock top panel from CD MP3 MP4 DVD PC or any dig
Download Pdf Manuals
Related Search