EverFocus EAN850A surveillance camera
Contents
1. Alarm Input Trigger Alarm Manual Trigger Send Mail Notification Motion Detection Upload to FTP Schedule Recording Record to SD Card Record to PC Network Alarm Enable Pre alarm Buffer L Enable Re trigger Enable This Event Event Rule When Manual Trigger happens Camera Upload to FTP Time Mask Always se 1 Click button in Event page 2 Enter an event name for the event e g Event 1 3 Select Manual Trigger as event type 4 Select Upload to FTP as action type 5 Check Enable Pre alarm Buffer and Enable Post alarm Buffer For pre and 46 13 EverFocus EAN850A post alarm buffer setting please refer to 4 7 3 Alarm 6 Check Enable This Event 7 Select Always for time mask For detail about Time Mask please refer to 4 7 4 Time Mask 8 Click to save this event in event list 4 7 2 Motion ld EverFocus Live Event Motion Alarm i Time Mask Motion Detection Left button click Draw line Left button double click a Connect to first point v e Right button click In ate Clear all polygon a DA 2 mn Areaname je je finos jee fs Enable O O O O O Sensitivity 5 y 5 y 5 y 5 y 5 y Apply Reset Motion Detection User can define the motion area to be detected by left clicking the mouse to draw lines Eve2. 4 7 1 Event The settings relating to event occurrences such as settings for the event occurrence motion alarm and time mask can be configured on this page The Event page has 4 tabs Event tab the Motion tab the Alarm tab and the Time Mask tab IJ EverFocus Event Motion Alarm Time Mask Event List Enable Name Event Type Actions Time Zone new event Motion Detection MD1 Trigger Alarm Always Press button to add an event condition To modify the event list click on the event and it will be highlighted Press button to modify the setting To remove an event from event list click on the event and it will be highlighted Press button to remove the event Check Enable checkbox to activate event actions when the event occurs in the specified time zone Event List Enable Name Event Type Actions Time Zone Ll new event Motion Detection MD1 Trigger Alarm Always i motion Motion Detection MOL Record to PC Always To change the priority of events click on the event and 1t will be highlighted Press 45 03 EverFocus EAN850A Or button to move between events The event that has highest priority will be activated first Press Apply to apply the setting changes or Reset to reset without saving the change This example describes how to set the camera to upload images to FTP when someone press Manual trigger button Enter Event Name Event 1 Add Event Type Actions
3. External Audio Input L v Audio Input Volume 7 Ss BB Audio Check Enable Audio box to enable audio function Audio Input Audio from an internal microphone or a line source can be connected to the Audio connector of EAN850A The audio source can be selected from Internal Microphone External Audio Input L and External Audio Input R Note Microphone is not available for U S region Audio Input volume Adjust the Audio Input Volume for the audio input devices connected to the camera 1f there are problems with the sound input being too low or high Press Apply to apply the setting changes or Reset to reset without saving the change 42 13 EverFocus EAN850A 4 6 USER ld EverFocus User User Information Account Description Password Authority Status user Administrator 1 e user2 Normal user 2 00000000 USER v ACTIVE user3 Normal user 3 00000 GUEST v ACTIVE user4 Normal user 4 00000000 GUEST WM DISABLE users Normal user 00000000 GUEST u DISABLE user6 Normal user 6 00000000 GUEST WM DISABLE user Normal user 7 eeceseee GUEST WM DISABLE users Normal user 8 00000000 GUEST v DISABLE userg Normal user 9 00000000 GUEST f DISABLE user10 Normal user 10 00000 GUEST v DISABLE u lt y C U a User Information Maximum 10 users can be set for using the IP camera The user information displays the authori
4. RETURN lt 4 4 2 8 4 MOTION DETECTION EAN850A enables you to observe movements of objects in 4 different places on the screen the message MOTION DETECTED appears on the screen when movement 1s detected therefore this helps to improve supervision efficiency The camera detects an object s movement by sensing discrepancy of outline 1 Please direct the arrow to point to MOTION DET by using the UP or DOWN button 2 Select ON by pressing the LEFT or RIGHT button 3 Press SET button SPECIAL MOTION DETECTION CAMERA ID COLOR ADJ lt SYNC gt MOTIION DET gt AEREA SEL AREA1 AREA STATE ON TOP 10 PRIVACY DOWN 25 LEFT 20 RIGHT 40 MIRROR SHARPNESS RESET RETURN lt Press SET to return Please select the area you would like to detect from the 4 areas in AREA SEL mode Please select ON mode for the chosen area 35 J EverFocus EAN850A Please use the UP or DOWN button to move between TOP DOWN LEFT and RIGHT for adjusting the size of the area Please use the LEFT or RIGHT button to adjust the value for size of the area Additionally it is possible to change the position of the area Please refer to the following example for detailed steps on moving AREA to center 1 The original position of AREA was TOP 10 DOWN 25 LEFT 20 and RIGHT 40 AREAI 2 Increase DOWN scale value by 20 AREAI position a
5. s recorded digitally reduced noise can reduce image file size As the level of gain changes the background noise in the low light level automatically decreases 1 Please direct the arrow to point to DNR on the SETUP menu by using the UP and DOWN buttons 2 Select the mode you would like to operate by pressing the LEFT or RIGHT button SETUP LENS SHUTTER WHITE BAL BACKLIGHT AGC gt DNR SENS UP SPECIAL lt EXIT DC lt ATW OFF MIDDLE LOW AUTO lt gt OFF No reduction in noise level gt LOW Little reduction in noise level with nearly no ghost image Default value is LOW gt MIDDLE Just enough reduction in noise levels without causing much ghost imaging gt HIGH Huge reduction in noise level which may cause much ghost imaging Note When AGC is turned off DNR will be disabled 4 4 2 7 SENS UP SENS UP s used to keep a brilliant vivid screen image by automatically detecting changes in the level of light under low light level conditions The value is from x2 31 13 EverFocus EAN850A x 128 1 Please direct the arrow to point to SENS UP on the SETUP menu by using the UP and DOWN buttons 2 Select the mode you would like to operate by pressing the LEFT or RIGHT button gt AUTO Low light level auto mode Default value is AUTO Up to X 10 SETUP LENS SHUTTER WHITE BAL BACKLIGHT AGC DNR gt SENS UP AUTO lt SPECIAL lt EXIT g
6. Format Format SD Card Note All data saved on the SD card will be deleted when SD card is formatted Please do not turn the power of the EAN850A network camera off in the process of formatting Audio User Event E Setup SD Card Notification Notification will be made via e mail when the remaining space of the SD memory card reached the value selected from the following 50 20 10 5 2 0 Note 1 When 50 is selected e mail notification will be made each time the remaining space reaches 50 20 10 5 2 and 0 2 E mail notification may not always be made at a very moment when the remaining space of the SD memory card reached the selected value Event Recording FTP backup only Event video will record to SD card when network is disconnected 54 13 EverFocus EAN850A Normal Follow the event actions settings you have made in Event menu to record event video to SD card Overwrite Select ON for overwriting data when SD card memory 1s full Select OFF for not overwriting SD card data Press Apply to apply the setting changes or Reset to reset without saving the change SD Card Utility The total size and available size of the SD memory card will be displayed Depending on the state of the SD memory card the size indications will differ as follows Indication Description Capacity MB available MB used Before formatting the SD memory card 1t 1s necessary to press but
7. _ User Config Text Setting Machine Name Date Time Frame Rate Red A 128 Foreground Color Green m 128 Blue gt 128 Position Upper Left v Apply Reset Date Time Format Used in Text Date Format midiyyyy Time Format 24 Hours 12 Hours Apply Reset Recording Snapshot Export Setting Enable Event Recording to PC Export Folder CA File Size 1 Min Overwrite ON OFF If the remaining hard disk capacity is less than 50 MB 50 2000 system will stop recording or start overwriting Apply Reset Language Setting cm Language English Remove Browse Upload Upload language file Live view configuration 1s to be set by user Each login user can make his her own settings for the following items Text Setting Check the box for text of Machine name Date Time or Frame Rate to be displayed on the screen Text Color Foreground Color Select the foreground color of text to be displayed by moving the slide bar between Red Green and Blue until your desire color is obtained Position Select the position where the text will be displaying from Upper Left Lower Right Lower Left 14 f EverFocus EAN850A Press Apply to apply the setting changes or Reset to reset without saving the change Date Time Format Used in Text Select Date Time Format from the following options dddd mmmm d Yyyy v midiyyyy mmm d yyyy Time Fo
8. gt Move the cursor onto POS and press the SET button gt The name will appear at the top left hand corner gt Please use the 4 directional buttons to find the desired position to 33 f EverFocus EAN850A display the name 6 If you would like to cancel the ID inputted please move the cursor to CLR and all the letters inputted will be deleted 7 Select END and press SET button to complete ID input SPECIAL gt CAMERA ID COLOR ADJ lt SYNC MOTIION DET PRIVACY MIRROR SHARPNESS RESET RETURN lt 4 4 2 8 2 COLOR ADJ Adjust the Color Gain from 0 15 SPECIAL CAMERA ID COLOR GAIN gt COLOR ADJ lt SYNC gt LEVEL t 8 MOTIION DET PRIVACY MIRROR SHARPNESS RESET RETURN lt 34 f EverFocus EAN850A 4 4 2 8 3 SYNC There are two SYNCHRONIZATION modes INTERNAL and EXTERNAL LINE LOCK In LINE LOCK mode without a synchronous generator it synchronizes the video signal between cameras The Line Lock synchronization 1s only used in the places of 60Hz NTSC models or 50Hz PAL models INT Internal synchronization LL External line lock synchronization gt If you choose LL you can adjust the phase your wish to set Then press the mini joystick You can adjust the phase you wish to set from 0 to 359 SPECIAL CAMERA ID OFF COLOR ADJ lt gt SYNC LL lt 0 MOTIION DET OFF PRIVACY OFF MIRROR OFF SHARPNESS ON lt RESET
9. Sender Address Input sender s e mail address so that receiver can recognize the sender when an event message is sent out 21 13 EverFocus EAN850A Send Test Mail Press button to send a testing mail to the assigned address Set FTP The settings relating to the FTP server used to transmit the alarm images can be configured FTP Server Enter the IP address or the host name of the FTP server FTP Port Enter the port number for FTP server Default 1s 21 Recording Path Assign the recording path User Name Set FTP User s name Password Set FTP password PASV mode Check to enable Passive mode normally enable Passive mode When failed to establish the connection uncheck PASV mode Test FTP Server Press button to send a testing file to the assigned FTP server Press Apply to apply the setting changes or Reset to reset without saving the change 22 U3 EverFocus v 4 3 5 Network Alarm reserved for PowerCon fJ EverFocus Network DDNS Bandwidth SMTP FTP Network Alarm Set Network Alarm Protocol UDP v Port No 1600 Unique ID 0000000001 Server 1 132 188 1 1 Server 2 192 168 1 1 Server 3 192 168 1 1 Set Network Alarm This function 1s reserved for PowerCon software for the detail setting please refer to PowerCon network alarm protocol 4 4 Video The settings relating video such as streaming camera OSD can be configured on t
10. goes up extremely it may affect the video image and cause noise ON Enable the SHARPNESS mode OFF Disable the SHARPNESS mode Please press the SET button The available range of level is 0 31 SPECIAL SHARPNESS CAMERA ID COLOR ADJ lt SYNC MOTIION DET gt LEVEL 8 PRIVACY MIRROR gt SHARPNESS RESET RETURN lt 40 13 EverFocus EAN850A 4 4 2 8 8 RESET Press the SET button on RESET for 3 seconds until 1t restarts It will go to factory default value SPECIAL CAMERA ID COLOR ADJ lt 4 SYNC MOTIION DET PRIVACY MIRROR SHARPNESS gt RESET RETURN lt 4 4 2 8 9 RETURN Press the SET button on RETURN It saves all settings n SPECIAL menu and returns to the Setup menu SPECIAL CAMERA ID COLOR ADJ lt SYNC MOTIION DET PRIVACY MIRROR SHARPNESS RESET gt RETURN lt 4 4 2 9 EXIT Press the SET button on EXIT after you finish all the settings It will return to live image Note If you quit the Menu without pressing EXIT all the settings you previously did will NOT be saved 41 13 EverFocus EAN850A 4 5 Audio The EAN850A camera can transmit audio to other clients using a built in microphone or connecting to external microphone to play audio received from other clients via connected speakers This section describes how to configure the basic audio settings fJ EverFocus Audio Audio O Enable Audio Audio Input
11. time for time mask by clicking Up arrow or Down arrow Or simply press for a full day of event action Press button to remove a scheduled time period An example on how to set weekend as time mask 1s as follows Click from time mask setting l 2 Enter Mask name e g Weekend 3 Check Sun amp Sat boxes 4 Select Start time and End time or Full day Press Apply to apply the setting changes or Reset to reset without saving the change 50 13 EverFocus EAN850A 4 8 SYSTEM Date Time Daylight Saving SD card and Maintenance settings can be performed on this page The System page has 4 tabs of the Date Time tab the Daylight Saving tab the SD card tab and the Maintenance tab 4 8 1 Date Time W3EverFocus verrocus EX Date Time Daylight Saving SD Card Maintenance Machine Name Setting MET s Machine Name EAN800A 1 0 0 33 Set Time Zone Network e Time Zone GMT v m O hid Set Date Time Manually a Date 52 Es Time 14 47 37 n mam Bet O Set Date Time Sync Enable NTP NTP Server pool ntp org Sync Interval 1 Hour v Machine Name Setting Machine Name Enter the name of the camera The entered name will be displayed in the status display area Press Apply to apply the setting changes or Reset to reset without saving the change Set Time Zone Time Zone Select a time zone accor
12. unit 1s rebooted without changing any of the settings Use this method by pressing button 1f the unit 1s not behaving as expected Restore The unit 1s restarted and most current settings are reset to the factory default values by pressing button The only settings saved are e IP setting e DDNS setting Default The Default button should be used with caution Pressing this button will return all of the camera s settings including the IP address to the factory default values The camera will then have to be re installed Save Load Configuration Server To take a backup of all of the configurations press to save all configurations to a config file If necessary 1t 1s then possible to return to the previous settings 1f the settings are changed and there 1s unexpected behavior Press the button to locate the saved config file see above and then click S6 13 EverFocus EAN850A Load button The settings will be restored to the previous configuration Upgrade Firmware Upgrade the EAN850A with the latest firmware Press Brow se button to search firmware file Press Upgrade button to upgrade the firmware Note I Do not disconnect power to the unit during the upgrade The unit reboots automatically after the upgrade has completed 1 5 minutes 2 During upgrading process all event recording actions will be stopped It will continue to record after the camera is rebooted 57 3 EverFocus EAN85
13. without saving the change 4 3 Network The network settings and the settings relating to Network DDNS Bandwidth SMTP FTP and Network Alarm can be configured on this page The Network setup page has 5 tabs of the Network tab the DDNS tab the SMTP FTP tab and the Network alarm tab 4 3 1 Network IP Setting IP Type DHCP v IP Address 192 188 12 84 Subnet Mask Gateway Primary DNS 610310102 Secondary DNS Network The following information is required to configure the network settings Contact the network administrator or your Internet service provider e IP Type e IP address 16 03 EverFocus EAN850A e Subnet mask e Gateway when using the gateway server router e Primary DNS Secondary DNS when using DNS e HTTP Port IP SETTING IP Type DHCP Configure the DHCP server not to assign the same IP addresses used for the other network cameras and PCs whose IP address is unique Refer to the network administrator for the settings of the server Default DHCP Static IP User can manually set the static IP for network connection PPPoE This is a DSL connection application ISP will ask user to input user name and password Note If PPPoE is used as IP type IP Utility software will not be able to detect the device IP address When not using DHCP enter the IP address of the camera Do not enter the IP address already used for PC or other network cameras Subnet M
14. 0A 5 SPECIFICATIONS ewa S CA Kr Te OOO O O A A CI 3 5 mm stereo socket sensitivity 1 Vrms 3 5 mm stereo socket sensitivity 1 Vrms at load of 10KOhm and 50pf A BE NETWORK A Interface 10Base T 100Base TX auto negotiation RJ 45 socket Support MDI MDI X auto crossover function Supported Protocols HTTP TCP IP UDP RTP RTSP FTP SMTP DHCP DNS DDNS NTP Bandwidth Control Min 64 kbps adjustable Max Client Limit 32 simultaneous clients STAR IN Alarm Input 1 x input for dry contacts Normal Open Normal Closed adjustable Alarm Output 1 x dry relay contact Normal Open Normal Closed adjustable 70 VDC 200 mA max 58 3 EverFocus EAN850A RS 485 RS 485 interface bi direction half duplex functionality reserved Event Triggered By Alarm input Manual trigger Motion detection and Schedule recording Notification Over Trigger alarm output Send mail notification Upload video to FTP Record video to SD card Record video to PC and Network alarm Pre and Post alarm Buffer 48MB RAM reserved for pre alarm record up to 120 sec SD Card Secure Disk physical layer specification version 2 0 Supports SDHC Host Specification Power Supply 12 VDC amp PoE Power cord with 5 5 mm cable socket 5 5 mm adapter cable 20 cm included in package Power Over Ethernet Yes PoE 802 3af Dimensions 68 W x 57 H x 136 D mm 146mm D with BNC socket 2 7 W x 2 2 H x 5 4 D 5 7 D with BNC
15. 2 61 login 2008 06 24 16 26 User user1 192 168 12 66 login 2008 06 24 13 35 User user3 192 168 12 55 login 2008 06 24 13 33 User user2 192 168 12 55 login 2008 06 24 13 32 User user1 192 168 12 55 login 2008 06 24 13 21 User userl 192 168 12 55 login 2008 06 24 13 21 User user1 192 168 12 55 login 2008 06 24 13 00 User userl 192 168 12 66 login 2008 06 24 11 23 User user1 192 168 12 66 login 2008 06 24 11 23 User user1 192 168 12 66 login 2008 06 24 11 22 User userl 192 168 12 55 login 2008 06 24 11 21 User userl 192 168 12 55 login 2008 06 24 11 19 Boot 2008 06 24 11 19 System reboot by ITSELF LOCAL HOST 2008 06 24 11 16 Firmware is upgraded by userl 192 168 12 55 2008 06 24 11 16 User userl 192 168 12 55 login 2008 06 24 11 15 User userl 192 168 12 55 login 2008 06 24 08 55 User userl 192 168 12 61 login 2008 06 24 08 55 User user1 192 168 12 61 login 2008 06 24 08 54 User user1 192 168 12 61 login System Log Date Time displaying date and time of the log Log message all information and event message including login user s IP reboot firmware upgrade load factory default configuration reset and event detected System will keep the newest 256 records 13 f EverFocus EAN850A Press button to export system log into txt file and select the location where the exported log file will be saved to 4 2 User Config IJ EverFocus
16. EANSS0A User s Manual J EverFocus Copyright EverFocus Electronics Corp Release Dec 2009 Rev D 3 EverFocus EAN850A Product Name EAN 850A EverFocus IP Network Cameras Model Number s EAN850A FCC Notice Declaration of Conformity Information This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential Installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver 1s connected Consult the dealer or an experienced radio TV technician for help Warning Changes or modifications made to this equipment not expressly approved by EverFocus or parties authorized by EverFocu
17. EE ER NE 12 R o A 13 AS CON Oi as 14 O ee 0 teenie ce A EHRE RER 16 E e o e OE EA A 16 A A O O O 19 A DAI tatiana 20 A SMTP ore 21 4 3 5 Network Alarm reserved for POWerCon eee 23 e e On In O PP P o 23 4 4 1 NI Streamme nee ts 24 A A E pe CUE CA 25 E A O 2 AS ee ee 27 4 4 2 3 WHITE BALANCE Control oooocccccnncnnnnnanocononoccnnnnacocccncnncnnanonoss 28 112 2 BACKTIGEN o No II 30 4 4 2 5 AGC Auto Gain COn 30 4 4 2 6 DNR Dynamic Noise Reduction eee eeeeeeeeeeee0 000 31 PO JN OJ O 1 POR e eo P 31 FE OE P gn A A 33 A DN A e O PP O SO O 41 PP P 42 A ABP A OP O O 43 o y A 44 A A e A A E ANESIERe 45 SR o A 47 oO O O 48 A 7A IS MAS PROP KO PRO RO n N 49 f EverFocus EAN850A Pod TT M MPP o E 51 ADA Mt E ET A O E 51 AD AA E O L O O 53 A A a rr R E OP PO EHE RIERERREENERE 54 8 AN ae EO ee en O 56 Bie OE LCA TION ee een nen 58 ld EverFocus EAN850A 1 INTRODUCTION The new EAN850A network camera provides H 264 MPEG 4 and MJPEG compression for multi streaming capabilities H 264 1s the most advanced video compression technology that saves your bandwidth without sacrificing video quality EANS850A is a super low lux 0 002 lux camera with True Day Night and built in DNR Dynamic Noise Reduction EAN850A produces crystal clear images in low light conditions with substantial disk saving Supported with PoE Power over Ethernet IEEE802 3af EAN850A is equipped with built in SD card s
18. KLIGHT function 1 Please direct the arrow to point to BACKLIGHT on the SETUP menu by using the UP and DOWN buttons 2 Select the mode you would like to operate by pressing the LEFT or RIGHT button SETUP LENS SHUTTER WHITE BAL gt BACKLIGHT AGC DNR SENS UP AUTO lt SPECIAL lt EXIT gt HIGH The gain increases from OdB up to 42dB gt MIDDLE The gain increases from OdB up to 30dB gt LOW The gain increases from OdB up to 18dB gt OFF BACKLIGHT function does not operate 4 4 2 5 AGC Auto Gain Control 1 Please direct the arrow to point to AGC on the SETUP menu by using the UP and DOWN buttons 2 Select the mode you would like to operate by pressing the LEFT or RIGHT button The more the level of gain increases the brighter the screen and the level of noise increases as well gt HIGH The gain increases from 6dB up to 42dB gt MIDDLE The gain increases from 6dB up to 30dB gt LOW The gain increases from 6dB up to 18dB gt OFF The gain is fixed at 6dB SETUP LENS DC lt SHUTTER o WHITE BAL ATW BACKLIGHT OFF gt AGC MIDDLE DNR LOW SENS UP AUTO lt SPECIAL lt EXIT 30 03 EverFocus ANOVA 4 4 2 6 DNR Dynamic Noise Reduction Dynamic Noise Reduction in video images has the following effects 1 Images are brighter and sharper 2 When the level of noise 1s reduced the performance of a camera can apparently be Improved 3 When it
19. ask This field 1s to set the netmask for your network so as the IP camera will be recognized within the network Example 255 255 255 000 When DHCP s selected the DHCP server will assign this value automatically Gateway This field 1s to set the gateway for your network so the IP camera will be recognized within the network When DHCP is selected the DHCP server will assign this value automatically Primary DNS An IP address of DNS server that 1s provided by ISP 17 03 EverFocus Secondary DNS If your ISP provides you an IP address secondary DNS please set 1t here EANSS50A Username Enter User name of the account used only for PPPoE Password Enter Password of the account used only for PPPoE Press Apply to apply the setting changes or Reset to reset without saving the change Port Setting HTTP Port Port number for HTTP WEB communication Press Apply to apply the setting changes or Reset to reset without saving the change 18 13 EverFocus EAN850A 4 3 2 DDNS IJ EverFocus Network DDNS Bandwidth SMTP FTP Network Alarm DDNS Setting O Enable Service ISP O www everfocusddns com IP Cam Name everfocusddns com Register Update O www sitelutions com O www dyndns com O www no ip com Record ID 0 FODN Username Password System Info MC DDNS setting When accessing the camera via the Internet from the network environment of which the gl
20. d the IP address Step 3 Input Username and Password Default Username is user1 and default password is 11111111 Step 4 Click Login button Step 5 You might be required to download Active X which 1s required to view camera video Please click Yes Step 6 Congratulation You should be able to see the live image now IJ EverFocus que M N en E ES T lt ain eat AA I Video Stream CN Stream 2 v View Size A 704x480 v Digital Zoom Press button to display the Live page Double click on the image to show a full screen display double click again or press ESC to return normal display Press button to enter Setting page In Setting page there are 8 sections System Info User Config Network Video Audio User Event and System Please refer to 4 SETTING for further information 13 EverFocus EAN850A button to close EAN850A network page Press Video Stream Select Video Stream from Stream 1 Stream 2 Stream 3 and Stream 4 Please refer to 4 4 1 Multi Streaming for further information View Size You can select View size to either reduce or enlarge the image to the appropriate view size Select the view size for live images from 704 480 640 480 352 240 320 240 176 120 Digital Zoom Digital Zoom Press or button to enlarge reduce the displayed imag
21. ding to the location where the camera 1s in use Set Date Time Manually Date Click the calendar and pick the date Press lt lt to go previous year lt to go 51 J EverFocus Nosn previous month gt to go next month and gt gt to go next year lt A BS 1 E 2lsalals elz le 3 10 11 12 13 14 15 16 12 19 19 20 21 22 23 24 25 26 27 28 29 als I I 7 7 Time Click on Hour Minute Seconds am pm then use up arrow to increase value and down arrow to decrease value Press Apply to apply the setting changes or Reset to reset without saving the change Set Date Time Sync Check Enable NTP checkbox to enable NTP server NTP server Time automatically adjusted by synchronizing with NTP server will be used as the standard time of the camera Sync Internal Select an interval 1 24 hours in 1 hour intervals of synchronization with the NTP server Time Zone Select a time zone according to the location where the camera is in use Press Apply to apply the setting changes or Reset to reset without saving the change 52 13 EverFocus EAN850A 4 8 2 Daylight Saving 03 EverFocus Set Daylight Saving O Enable Daylight Saving Start 41ST v Sunday vin January M Switch from 00 00 To 00 00 End AST v Sunday vin January M Switch from 00 00 To 00 00 Set Daylight Saving Check Enable Daylight Saving checkbox to enable daylight saving Set the s
22. dle Normal Low Lower Lowest Frame Rate select from NTSC 1 3 5 15 30 fps PAL 1 2 5 5 12 5 25 fps 24 13 EverFocus EAN850A Note 1 Total frame rate cannot exceed 60 fps 2 System performance may be influenced if user enables 4 video streams simultaneously Press Apply to apply the setting changes or Reset to reset without saving the change Video Recording Setting User can set video recording by selecting one of the enabled video streamings This will allow user to view live images as well as to record video of the other video streaming Video Stream Select video recording stream from any enabled stream Video File format Recording file will be saved as AVI or ARV select which file format to be used Press Apply to apply the setting changes or Reset to reset without saving the change 4 4 2 Camera ld EverFocus Multi Streaming Camera Camera Setting li i ES OSD Setting ICR Switch Setting AUTO o OBW a COLOR Camera Settings The Camera OSD setting can be displayed on a video monitor and can be configured using the operation buttons on this page 2 13 EverFocus EAN850A OSD setting Use the following buttons on the operation panel to operate the Camera OSD setting using a PC Please refer to 4 4 2 1 for detail guide of Camera OSD Setting OSD Setting M tee gt z ws SEE EN SET button Click this butt
23. e max is X10 Record The record button 1s used to record the current video stream The location where the image file is saved can be specified in Setting gt User s Config Please refer to 4 2 User Config for further information Note Record segment is limited to 5 min If you need to do long time recording please set schedule recording For more details about schedule recording please see 4 7 Event f EverFocus EAN850A Snapshot The Snapshot button saves a snapshot of the video image currently being displayed The location where the snapshot data 1s saved can be specified in Setting gt User s Config Please refer to 4 2 User Config for further information Je m o Play Audio Transmit Audio Click the Play Audio and Transmit Audio buttons to switch the sound off and on for the speaker and microphone respectively Trigger Event Aa Manual Control Trigger Event Press Trigger Event button to trigger an event directly from live view page and event actions will be effective 1f they have been set in Event menu Please refer to 4 7 1 Event 2 Manual Control Reset Alarm Press Reset Alarm button to reset alarm output remotely Status Display The name of the camera whose settings currently being configured current date time and current frame rate will be displayed TRADE Alarm Motion A Even
24. fter change is TOP 10 DOWN 45 LEFT 20 and RIGHT 40 AREAI 36 03 EverFocus EAN850A 3 Increase TOP scale value by 20 AREA position after change is TOP 30 DOWN 45 LEFT 20 and RIGHT 40 AREAI 4 Increase RIGHT scale value by 20 AREA position after change is TOP 30 DOWN 45 LEFT 20 and RIGHT 60 AREAI a 5 Increase LEFT scale value by 20 AREA position after change is TOP 30 DOWN 45 LEFT 40 and RIGHT 60 AREAI In order to save the changes and complete the setting press the SET button This allows you to return to the previous menu 4 4 2 8 5 PRIVACY This mode covers the areas you do not want to see on the screen 1 Please direct the arrow to point to PRIVACY by using the UP or DOWN button 2 Select ON by pressing the LEFT or RIGHT button 3 Press SET button 37 03 EverFocus EAN850A SPECIAL PRIVACY CAMERA ID COLOR ADJ lt gt AEREA SEL SYNC AREA STATE AREA TONE 80 TOP t 10 DOWN 25 LEFT 20 RIGHT 40 MOTIION DET gt PRIVACY MIRROR SHARPNESS RESET RETURN lt Please select the area you would like to cover from the 4 areas in AREA SEL mode Please select ON mode for the chosen area Please select AREA TONE for cover area color The smaller the number the darker the color Please use the UP or DOWN button to move between TOP DOWN LEFT and RIGHT for ad
25. his page The Video page has 2 tabs the Multi streaming tab and the Camera tab 23 A EverFocus 4 4 1 Multi Streaming ld EverFocus Multi Streaming Camera EANSS50A Stream Setting Stream 1 Format Resolution 4CIF 704x576 Quality 3 High k Stream 2 Enable Format H 264 Resolution 4CIF 704x576 Quality High Ee Stream 3 Enable Format H 264 Resolution 4CIF 704x576 Quality High E JE Stream 4 O Enable Format H 264 a Resolution 4CIF 704x576 Quality E Highest EIE Video Recording Setting Video Stream Stream 1 v Video File Format ARV v Frame Rate Frame Rate Frame Rate Frame Rate Stream Setting The system can output 4 video streams simultaneously For each of them user can set compression format resolution quality and frame rate individually Stream 1 1s always enabled for live view Check Enable box to enable other streams Format Select encode format from H 264 MPEG4 and MJPEG Resolution NTSC 4CIF 704 480 VGA 640 480 CIF 352 240 QVGA 320 240 QCIF 176 120 PAL 4CIF 704 576 VGA 640 480 CIF 352 288 QVGA 320 240 OCIF 176 144 Quality there are 8 types of quality please choose from Highest Higher High Mid
26. iately before and after a trigger e g 5 seconds before or after a motion has been detected Pre Alarm Buffer Image saved internally in the server from the time immediately 48 13 EverFocus EAN850A preceding the trigger Input the desired length of pre trigger buffer time It can be set up to 120 seconds Post Alarm Buffer Image saved internally in the server from the time immediately after the trigger Input the desired length of post trigger buffer time It can be set up to 120 seconds Press Apply to apply the setting changes or Reset to reset without saving the change Re trigger Filter Setting Re trigger Filter Set a re trigger filter time 1f another event 1s triggered during this time this triggered event will be ignored Press Apply to apply the setting changes or Reset to reset without saving the change 4 7 4 Time Mask IJ EverFocus Event Motion Alarm Time Mask Time Mask Setting Weekend Mask Name Weekend Y Sun O Mon Tue C Wed Cl Thu C Fri F Sat Start Time 02 00 EndTime 22 0 Time Mask Setting Time mask setting allows you to schedule event actions Select Always for event action to be taken continuously 49 f EverFocus EAN850A Press button to add new time period Mask name Input a mask name for the new time period Check the check box for the day to be scheduled Sun Mon Tue Wed Thu Fri Sat Set the Start time and End
27. jing China 100085 TEL 86 10 62973336 37 38 39 FAX 86 10 62971423 www everfocus com cn Europe Office Albert Einstein Strasse 1 D 46446 Emmerich Germany TEL 49 2822 9394 0 FAX 49 2822 939495 www everfocus de Japan Office 1809 WBG Maribu East 18F 2 6 Nakase Mihama ku Chiba city 261 7118 Japan TEL 81 43 212 8188 FAX 81 43 297 0081 WWW everfocus co jp R Bitte entsorgen Sie dieses Ger t bei Ihrer rtlichen kommunalen Sammelstelle oder im Recycling Centre ver OCUS Helfen Sie uns bitte die Umwelt zu erhalten in der wir leben
28. justing the size of the area to be covered Please use the LEFT or RIGHT button to adjust the value for size of the area to be covered Additionally it is possible to change the position of the area to be covered Please refer to the following example for detailed steps on moving AREAI to center 38 03 EverFocus EAN850A 1 The original position of AREAT was TOP 10 DOWN 25 LEFT 20 and RIGHT 40 AREAI 2 Increase DOWN scale value by 20 AREA position after change is TOP 10 DOWN 45 LEFT 20 and RIGHT 40 AREAI In 3 Increase TOP scale value by 20 AREA position after change is TOP 30 DOWN 45 LEFT 20 and RIGHT 40 AREAI 4 Increase RIGHT scale value by 20 AREA position after change is TOP 30 DOWN 45 LEFT 20 and RIGHT 60 Al 39 03 EverFocus EAN850A 5 Increase LEFT scale value by 20 AREA position after change is TOP 30 DOWN 45 LEFT 40 and RIGHT 60 AREAI In order to save the changes and complete the setting press the SET button This allows you to return to the previous menu 4 4 2 8 6 MIRROR ON Sets a horizontal image 180 angel inversion OFF Disable the inversion SPECIAL CAMERA ID COLOR ADJ lt 4 SYNC MOTIION DET PRIVACY gt MIRROR SHARPNESS RESET RETURN lt 4 4 2 8 7 SHARPNESS The contour of the video image becomes cleaner and more distinguishing as the level of SHARPNESS increases If the level
29. lot for local storage EverFocus EAN850A is the most flexible IP solution for all your application needs 2 FEATURES Built in H 264 MPEG 4 and MJPEG digital signal output at Full D1 image size with up to 30fps H 264 MPEG4 MJPEG multi stream output for simultaneous live monitoring and high resolution recording Support 4 independent video streams that can provide different compression formats and resolutions Power over Ethernet PoE IEEE 802 3af True Day Night function with ICR module Two way audio Built in DNR Dynamic Noise Reduction for noise reduction and a 70 saving of Disk storage The starlight Super high sensitivity of 0 002 Lux F 1 2 is achieved by setting SENS UP Shutter X128 Bandwidth control 64K 128K 256K 1M 2M 4M 8M bps and unlimited Built in network interface 10Base T 100Base TX for remote monitoring by PC Support MDI MDI X auto crossover function Smart Wizard settings for varied Event and schedule recording conditions Built in SD memory card slot for local storage and support SD High Capacity Built in digital Motion Detection and privacy area function Built in digital zoom function 03 EverFocus 3 ACCESSING THE CAMERA MENU EANSS50A Step 1 Start an Internet Explorer browser Step 2 Enter the IP address or host name of the camera in the Location Address field of your Internet Explorer browser Please refer to EAN850A Installation Guide for how to fin
30. lue here to restrict the number of clients accessing the camera This is useful f you need to save on bandwidth Up to 32 clients is allowed to see live video simultaneously Subsequent viewers will see a blank image Press Apply to apply the setting changes or Reset to reset without saving the change 20 f EverFocus EAN850A 4 3 4 SMTP FTP IJ EverFocus Network DDNS Bandwidth SMTP FTP Network Alarm Set SMTP SMTP Server SMTP Port 25 O Authentication User Name Password nd Receiver Address Sender Address Send Test Email use to separate addresses Set FIP FTP Server FTP Port Recording Path User Name Password O PASV Mode Test FTP Server EZ Set SMTP The settings relating to the mail server used to send the e mail notification from the camera to predefined addresses via SMTP can be configured SMTP Server Enter the IP address or the host name of the SMTP server used to send e mails SMTP Port Enter the port number for SMTP Default 1s 25 Authentication Check the box if the SMTP server requires Authentication user password User name Input the login user ID 1f the SMTP server requires Authentication Password Input the password 1f the SMTP server requires authentication Receiver Address Input the e mail address for receiving e mail message when the EVENT is enabled and triggered Please use 3 to separate address
31. nded power supplies Power supplies must comply with the requirement of the latest version of IEC60950 1 Substitutions may damage the unit or cause a fire or shock hazard Electrostatic sensitive device Use proper CMOS MOSFET handing precautions to avoid electrostatic discharge Installation should be performed by gualified service personnel only in accordance with the National Electrical Code or applicable local codes Terms and Trademark Ethernet Internet Explorer Linux Microsoft Windows WWW are registered trademarks of the respective holders Other product names appearing in this User s Guide may be trademarks or registered trademarks of their respective holders Java and all Java related logos and trademarks are trademarks or registered trademarks of Sun Microsystems Inc in the United States and other countries Support If the unit ever needs repair service the customer should contact the nearest EverFocus Electronics Corp Service Center for return authorization and shipping instruction About AC Adaptor Specifications for AC adaptor Power Supply 12VDC 1 A Power Output 12VDC 1 A Operating Temperature 0 40 32 104 J EverFocus EAN850A External Dimensions 56 mm x 68 mm x 101 mm 2 24 x 2 72 x 4 04 TABLE OF CONTENTS INTRODUCTION PS 7 UA AAA erento 7 3 ACCESSING THE CAMERA MENVD unse 8 Pe n BA M Do SPP PMMA ono open RA 12 EIN O zavede ee E 12 Z TOT OD coded A anna T
32. obal IP address is obtained using DHCP the DDNS function is necessary To use the DDNS function 1t 1s necessary to connect to the dedicated DDNS server We offer 4 DDNS server providers as follow o www everfocusddns com www sitelutions com O Oo www dyndns com O Wwww no ip com Enable Check the box to enable DDNS setting Service ISP If you choose EverFocus DDNS server you can obtain a free account name from EverFocus www everfocusddns com Enter an IP Cam Account Name everfocusddns com Press LRegister Updat button to register or update DDNS account If you wish to get a domain name from other DDNS provider it is necessary to 19 13 EverFocus EAN850A configure Record ID FODN Username and password and register in DDNS server Refer to the web site for further information about the DDNS Press Apply to apply the setting changes or Reset to reset without saving the change 4 3 3 Bandwidth IJ EverFocus Bandwidth Setting Max Bandwidth unlimited v bps Max Client Limit 8 1 32 subseguent viewers will see a blank image MEER Bandwidth Setting Max Bandwidth Specify Unlimited 64 K 128 K 256 K 512 K 1M 2M 4M 8M bps the maximum bandwidth that the camera s allowed to use on the network This s a useful function when connecting the camera to busy or heavily loaded networks The default setting s Unlimited Max Client Limit enter a va
33. on to move to the submenu Left button Right button Click these buttons to select the parameters Down button Up button Click these buttons to move the cursor ICR Switch Setting ICR Switch Setting AUTO O BW O COLOR AUTO ICR switches automatically according to the illumination B W Select to keep B W image COLOR Select to keep color image 26 13 EverFocus EAN850A 4 4 2 1 LENS 1 When the SETUP menu is displayed on the screen please direct the arrow to point to LENS by using the UP and DOWN buttons Press the SET button to adjust IRIS level the higher 1s brighter In most cases you don t need to adjust this since Lens 1s Auto Iris supported gt LENS DC lt LENS SHUTTER o WHITE BAL ATW gt LEVEL 20 BACKLIGHT OFF AGC MIDDLE DNR LOW SENS UP AUTO lt SPECIAL lt 4 EXIT Note Since DC lens is a built in lens for EANS50A camera it does not support Manual lens please do not select lens as Manual mode it disables sens up and may cause malfunction of lens 2 Please press SET button for saving setting and return to the previous menu 4 4 2 2 SHUTTER 1 When the SETUP menu is displayed on the screen please direct the arrow to point to SHUTTER by using the DOWN button 2 Select the shutter mode by pressing the LEFT or RIGHT button Three modes are avallable FLK ESC and Manual Note Since DC lens is a built in lens for EANS50A camera shutter does n
34. ot support ESC and Manual functions ESC and Manual are reserved functions please do not select these two options in normal situation gt FLK Please select FLK mode when flickering occurs on the screen which is caused by an irregular balance between illumination and frequency NTSC model 1 100 PAL model 1 120 LENS MANUAL gt SHUTTER FLK WHITE BAL ATW BACKLIGHT OFF AGC MIDDLE DNR LOW SENS UP SPECIAL lt EXIT 21 J EverFocus EAN850A gt ESC Reserved BRIGHTNESS LENS MANUAL gt SHUTTER ESC lt BRIGHTNESS 25 WHITE BAL BACKLIGHT AGC DNR SENS UP AUTO lt SPECIAL lt EXIT gt Manual Reserved LENS MANUAL SHUTTER gt SHUTTER MANUAL lt WHITE BAL ATW BACKLIGHT OFF AGC MIDDLE DNR LOW SENS UP SPECIAL lt EXIT gt MANUAL 1 50 2 Press SET button when you finish all the settings ote With DC lens the shutter speed is fixed as 1 60 for NTSC and 1 50 for PAL 4 4 2 3 WHITE BALANCE Control The screen color can be adjusted by using the WHITE BALANCE function 1 Please direct the arrow to point to WHITE BAL on the SETUP menu by using the UP and DOWN buttons 2 Please select the mode you would like to operate by pressing the LEFT or RIGHT button Please select one of the 3 modes below gt ATW Auto Tracking White Balance This mode can be used within the color temperature range from 2 500 K to 8 300 K eg fluorescen
35. rmat 24 Hours or 12 Hours Press Apply to apply the setting changes or Reset to reset without saving the change Recording Snapshot Export Setting Enable Event Recording to PC Allow event video recorded to users PC 1f any events have been set to record to PC Export folder Select Export folder by clicking on B button then direct to the folder to be exported File size Able to limit the size of the single recording file in minutes When the single recording file size exceeds the time you set system will create a new file to continue recording Overwrite Select ON for overwriting recording snapshot file when the disk storage capacity is full If the remaining hard disk capacity is less than MB enter the value you wish to set between 50 2000 system will stop recording or start overwriting Press Apply to apply the setting changes or Reset to reset without saving the change Language Setting Language Select the language to be displayed in web page Default language is English To add a new language which is not listed in the original configuration press the Browse button to locate the new language file evb and then click the Load button 15 13 EverFocus EAN850A Note 1 Maximum five languages can be in the language list 2 Upload a new language file will reboot system automatically Please reconnect IP camera after reboot Press Apply to apply the setting changes or Reset to reset
36. ry click is an end point of the line When the detection area is formed double click the mouse to have all the lines connected To remove the selection simply right click the mouse the selected polygon will be deleted Press to update the current image Press to have the entire screen selected for motion detection Press to clear all selections Press and click on the polygon to erase that polygon 47 13 EverFocus EAN850A There are 5 motion trigger areas which can be distinguished by 5 different colors Check Enable checkbox to enable event action For each of them you can set the event action to be activated Event action can be set in Event section Moreover you can set the Sensitivity level for motion triggered by selecting from 1 low 2 3 4 5 6 7 8 9 to 10 high 4 7 3 Alarm 3 EverFocus Event Motion Alarm Time Mask Alarm Output Setting Contact Type N O v Duration Time 5Sec v Pre Post Alarm Setting Pre alarm Buffer 30 Sec Post alarm Buffer 30 Sec Re trigger Filter Setting Re trigger Filter 5 Sec Alarm Output Setting Contact Type Normal Close Normal Open Duration Time Select duration time of alarm output from 5 sec 10 sec 20 sec 30 sec 60 sec 2 min 3 min and 5 min Press Apply to apply the setting changes or Reset to reset without saving the change Pre Post Alarm Setting This function is used to check what happened immed
37. s could void the user s authority to operate the equipment This device complies with part 15 of the FCC Rules Operation 1s subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation EverFocus Electronics Corp 12F No 79 Sec 1 Shin Ta Wu Rd His Chi Taipei Hsien Taiwan R O C EAN850A complies with CE and FCC J EverFocus EAN850A About this document All the safety and operating instructions should be read and followed before the unit 1s operated This manual should be retained for future reference The information n this manual was current when published The manufacturer reserves the right to revise and improve its products All specifications are therefore subject to change without notice Safety Notice These limits are designed to provide reasonable protection This equipment generates uses and can radiated radio frequency energy and f not installed and used in accordance with the instructions may cause harmful interference to radio communications However there 1s no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user 1s encouraged to try to correct the interference by one or more of
38. socket Operating Temp 0 C 40 C 32 F 104 F 59 f EverFo cus EANSS50A EverFocus Electronics Corp Head Office 12F No 79 Sec 1 Shin Ta Wu Road Hs Chi Taipei Taiwan TEL 886 2 26982334 FAX 886 2 26982380 www everfocus com tw USA Office 1801 Highland Ave Unit A Duarte CA 91010 U S A TEL 1 626 844 8888 FAX 1 626 844 8838 www everfocus com USA N Y Office 415 Oser Avenue Unit S Hauppauge NY 11788 Tel 631 436 5070 FAx 631 436 5027 www everfocus com Your EverFocus product is designed and manufactured with high quality materials and components which can be recycled and reused This symbol means that electrical and electronic equipment at their end of life should be disposed of separately from your household waste Please dispose of this eguipment at your local community waste collection recycling centre In the European Union there are separate collection systems for used electrical and electronic product Please help us to conserve the environment we live in Ihr EverFocus Produkt wurde entwickelt und hergestellt mit gualitativ hochwertigen Materialien und Komponenten die recycelt und wieder verwendet werden k nnen Dieses Symbol bedeutet dass elektrische und elektronische Ger te am Ende ihrer Nutzungsdauer vom Hausm ll getrennt entsorgt werden China Office Room B 05D 1 KESHI PLAZA Shangdi Information Industry Base Haidian District Bei
39. t OFF The function is disabled 3 Press SET button when you finish all the settings Note 1 The maximum storage magnification in low light level movement situations can be adjusted by pressing the mini joystick in AUTO mode 2 The screen becomes brighter when the magnification increases yet the after image increases as well 3 Please be noted that spots and noise may appear if storage magnification increases when SENS UP is operating This is a normal phenomenon 32 3 EverFocus EAN850A 4 4 2 8 SPECIAL 1 Please direct the arrow to point to SPECIAL on the SETUP menu by using the UP and DOWN buttons SETUP LENS SHUTTER WHITE BAL BACKLIGHT AGC DNR SENS UP AUTO lt gt SPECIAL lt EXIT 2 Select the mode you would like to operate by pressing the LEFT or RIGHT button SPECIAL gt CAMERA ID COLOR ADJ lt SYNC MOTIION DET PRIVACY MIRROR SHARPNESS RESET RETURN lt 4 4 2 8 1 CAMERA ID Input the camera ID and it will be appeared on the monitor 1 Please direct the arrow to point to CAMERA by using the UP or DOWN button 2 Select ON by pressing the LEFT or RIGHT button 3 Press SET button 4 Maximum 15 letters can be used for the ID gt Use UP DOWN LEFT and RIGHT buttons to select the letters gt Press the SET key to lock in the letters 5 Once a name has been selected please choose a position where you would like to display the name
40. t light outdoor sodium vapor lamp or inside tunnels gt AWC Auto White Balance Control Press the SET button while the camera is directed at a piece of white paper to get the optimum state under the 28 13 EverFocus EAN850A present illumination If the environment and the light source are changed you need to adjust the white balance again gt MANUAL The manual adjustment mode enables a more precise adjustment Please select ATW or AWC first Then change to manual adjustment mode and press the SET button Set the suitable color temperature and increase or decrease the red and blue color values at the same time while checking the color changes of the object SETUP WHITE BAL LENS DC lt SHUTTER o 32 gt WHITE BAL MANUAL lt 39 OFF BACKLIGHT AGC DNR SENS UP AUTO lt SPECIAL lt EXIT ote Under the following conditions the WHITE BALANCE function may not operate well In such cases please select the AWC mode 1 When the object s surroundings have a high color temperature 2 When the object s surroundings are dark 3 Ifthe camera faces a fluorescent light directly or is installed in a place where the illumination changes constantly the WHITE BALANCE function may become unstable 29 3 EverFocus EAN850A 4 4 2 4 BACKLIGHT Even there 1s a massive backlight behind the object bright images of the background and the object can still be obtained by using the BAC
41. t signals When an alarm or motion event is triggered a signal icon will flash to alert user The first icon is for alarm event and rest of the 5 icons are for motion event The motion event icons which differed by colors correspond to the motion trigger areas you have set in Motion menu Please refer to 4 7 2 Motion for detailed information about Motion setup 10 03 EverFocus EAN850A 13 EverFocus EAN850A 4 SETTING Click this button to display the setup menu 3EverFocus Video Stream Stream 2 View Size 704x480 Digital Zoom ej Le C E Manual Control ICE gt Reset Alarm 4 1 System Info System information and system log check of the setup menu can be performed on this page The System Info page has 2 tabs Information tab and the Log tab 4 1 1 Information System Information Firmware version MAC address Video Type Model number unchangeable for reference only 12 U3 EverFocus Avana IJ EverFocus System Information Firmware Ver 0 0 44 3 MAC Address 00 11 14 05 c0 17 Video Type NTSC Model Name EAN850A 4 1 2 Log ld EverFocus Information M System Log 2008 06 25 14 03 User user1 192 168 12 66 login 2008 06 25 10 42 49 User userl 192 168 12 66 login 2008 06 25 08 14 User userl 192 168 12 61 login 2008 06 25 08 05 User user1 192 168 12 61 login 2008 06 25 08 00 User userl 192 168 1
42. tart time to daylight saving time Set the start week of daylight saving time 1 2 3 4 Last Set the start date of daylight saving time Sunday Monday Tuesday Wednesday Thursday Friday Saturday Set the start month of daylight saving time January February March April May June July August September October November December Set the starting time change of daylight saving time Choose the From time and End time when daylight saving starts Set the end time of daylight saving time Set the end week of daylight saving time 1 2 3 4 Last Set the end date of daylight saving time Sunday Monday Tuesday Wednesday Thursday Friday Saturday Set the end month of daylight saving time January February March April May June July August September October November December Set the ending time change of daylight saving time Choose the From time and End time when daylight saving ends 53 13 EverFocus EAN850A Press Apply to apply the setting changes or Reset to reset without saving the change 4 8 3 SD Card J EverFocus Live Date Time Daylight Saving SD Card Maintenance System Info i Event Recording Normal y User Config Overwrite CON OFF Network Capacity 964MB available 708MB used 26 56 Video _ Remove Press this button to remove or attach SD card with the camera powered on to avoid SD card damage
43. the following measures Reorient or relocate the receiving antenna Increase these separations between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver 1s connected Consult the dealer or an experienced radio TV technician for help The changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment To reduce risk of fire or electric shock do not expose this appliance to rain or moisture Do not attempt to disassemble the appliance To prevent electric shock do not remove screws or covers There are no user serviceable parts inside Contact qualified service personnel for maintenance Handle the appliance with care Do not strike or shake as this may damage the appliance Do not use strong or abrasive detergents when cleaning the appliance body Use a dry cloth to clean the appliance when it is dirty When the dirt s hard to remove use a mild detergent and wipe gently 3 EverFocus EAN850A A Do not operate the appliance beyond its specified temperature humidity or power source ratings Do not use the appliance in an extreme environment where high temperature or high humidity exists Use the appliance at temperature within 0 C 40 C 32 104 and a humidity below 90 The input power source for this appliance is 12 VDC amp PoE A Use only the recomme
44. ton Once button 1s pressed button will be shown for user to insert the SD card back Press button to format SD card Obtain images on the SD memory card 1 Access the camera using the Windows command prompt or FTP client software The window with the user name and password entry fields will be displayed 2 Enter the user name whose access level is 1 Administrator and its password Log in the camera 3 A directory of all saved data will be displayed You are now ready to obtain images from SD card Note 1 It is impossible to access the SD memory card in the process of formatting 2 All data saved on the SD memory card will be deleted when the SD memory card is formatted 3 Do not turn the power of the camera off in the process of formatting 55 13 EverFocus EAN850A 4 8 4 Maintenance Maintenance Server Reboot the IP camera Resets all parameter except the IP parameters to the original factory settings Resets all parameter to the original factory settings Save Load Configuration Server Save all configuration to a config file Use a saved config file to return the unit to a previous configuration Upgrade Firmware Upgrade the EAN850A with the latest firmware Note Do not disconnect power to the unit during the upgrade The unit reboots automatically after the upgrade has completed 1 5 minutes 2008 07 03 System Info MC Maintenance Server Reboot The
45. zed users and access levels e Supervisor Administrator a supervisor administrator has unrestricted access to the Setting menu and can determine the registration of all other users However administrator is not allowed to change supervisor s account and password e User a user can view the Live View page system info network video audio and adjust user config settings The user does not have access to the user event and system pages e Guest the lowest level of access which only allows the user access to the Live View page ote Please select Active in Status section to activate user account Press Apply to apply the setting changes or Reset to reset without saving the change 43 f EverFocus EAN850A 4 7 EVENT An event in the camera is when an Event Type is activated and causes certain actions to be performed The event type is the set of conditions that specifies how and when which actions will be performed This table describes how to setup action types and event type Manual Motion Schedule Action Type Alarm Input Trigger Detection Recording Pre Post Alarm ote 1 Record to PC only works when PC and IP camera are connected 2 Either Upload to FTP or Record to Network Storage can be selected to record event video to remote site 3 Up to 10 event types can be configured in the camera and up to 3 of these can be configured to upload images 44 f EverFocus EAN850A
Download Pdf Manuals
Related Search