Samsung SCD-6080 surveillance camera
Contents
1. SSDR ON SSDR OFF 24_ Operating Your Camera BACKLIGHT This camera is designed so that it delivers a distinctive subject and background at the same time even when the subject is in backlight by adopting a function of the proprietary WN2 DSP chip 1 When the SETUP menu screen is displayed MAIN SETUP LENS EXPOSURE c WHITE BAL SSDR select lt BACKLIGHT gt by using the Function Setup switch so that the arrow indicates lt BACKLIGHT gt 2 Select a desired mode using the Function Setup switch depending on the camera purpose BLC Enables a user to select a desired area on a picture and view that area more clearly LEVEL Adjust level of the BLC function TOP BOTTOM LEFT RIGHT Adjust the area to be enhanced HLC High Light Compensation If the scene contains extremely bright light areas such as from car headlight the light can mask out much of the on screen detail LEVEL Adjust level of the HLC function MASK COLOR TONE Change the color brightness of the masking area Black Red Blue Cyan Magenta TOP BOTTOM LEFT RIGHT Adjust the area to be enhanced e OFF Not being used 3 Select a desired mode using the Function Setup switch BACKLIGHT SSNR3 DAY NIGHT SPECIAL c EXIT e y SONOO eo Na VUJIANVO UNOA ONILVUAdO 6 BLC SETUP HLC SETUP 1 LE2. SHUTTER picture flicker this happen when there is a AGC SENS UP RETURN c clash with the installed lighting frequency ESC Select this to control the shutter speed automatically If ESC is selected the shutter speed is automatically controlled depending on the ambient illumination of the subject MANUAL You can control shutter speed manually 1 30sec 1 12 000sec When you use a DC lens set the shutter mode to if color rolling occurs Carefully position the camera when installing since produced image quality might be poor if framing a bright light source while the shutter mode of EXPOSURE is set to AUTO When the SHUTTER is set to MANUAL or A FLK mode SENS UP will be disabled English _21 Operating Your Camera e AGC AUTO GAIN CONTROL The higher the gain level the brighter the screen but the greater the noise OFF Not being used Low Allows automatic gain control from 5 3dB to 20dB Medium Allows automatic gain control from 5 3dB to 26dB High Allows automatic gain control from 5 3dB to 320B e SENS UP When it is night or dark the camera automatically detects the light level and maintains a clear picture if this mode is activated OFF Deactivates the SENS UP function AUTO Activates the SENS UP function e RETURN Select this to save the changes in the EXPOSURE menu and return to the SETUP menu N Press the SET button while in AUTO mode to adjust t
3. SAMSUNG TECHWIN HD SDI CAMERA User Manual SCD 6080 CE ar HD SDI Camera User Manual Copyright 2011 Samsung Techwin Co Ltd All rights reserved Trademark ET samsung TECHVVIN is the registered logo of Samsung Techwin Co Ltd The name of this product is the registered trademark of Samsung Techwin Co Ltd Other trademarks mentioned in this manual are the registered trademark of their respective company Restriction Samsung Techwin Co Ltd shall reserve the copyright of this document Under no circumstances this document shall be reproduced distributed or changed partially or wholly without formal authorization of Samsung Techwin Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document but no formal guarantee shall be provided Use of this document and the subsequent results shall be entirely on the user s own responsibility Samsung Techwin reserves the right to change the contents of this document without prior notice Warranty If the product does not operate properly in normal conditions please let us know Samsung Techwin will resolve the problem for free of charge The warranty period is 3 years However the followings are excluded e If the system behaves abnormally because you run a program irrelevant to the system operation Deteriorated performance or natural worn out in process of time Design and specifications are sub
4. risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating AN and maintenance servicing instructions in the literature accompanying the product 4 overview Class I construction An apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing connection Battery Batteries battery pack or batteries installed shall not be exposed to excessive heat such as sunshine fire or the like MAIAYSAO 6 Disconnection Device Disconnect the main plug from the apparatus if it s defected And please call a repair man in your location When used outside of the U S it may be used HAR code with fittings of an approved agency is employed CAUTION These servicing instructions are for use by qualified service personnel only To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so Please use the input power with just one camera and other devices must not be connected English _5 Overview Please read the following recommend safety precautions carefully e Do not place this apparatus on an uneven surface e Do not install on a surface where it is exposed to direct sunlight near heating equipment or heavy cold area e Do not place this apparatus near conductive material e Do not
5. The effective range of pan is a total of 355 degrees The effective range of tilt is a total of 90 degrees n some angles the top cover may cause cutting some part of the monitoring object Do not rotate the focus zoom lens by force after removing the cover front Otherwise it may cause an incorrect focus due to a motor failure 4 Methods of adjustment 1 After installing the camera adjust the panning angle in consideration of the monitoring direction When tilting the camera you should adjust the horizontal angle lest that the image be displayed reversely 2 Adjust the tilt angle so that the camera faces toward the monitoring object 14_ installation amp connection CONNECTING WITH OTHER DEVICE HD SDI Monitor Motion detection output device Day Night mode controller NOILOANNODO 8 NOLVTIVLSNI 6 Connecting to the monitor Connect the video out port of the camera to the video input port of the monitor 4 In the initial installation of the camera you can connect the camera to the monitor for checking the connection status When connecting a general monitor device to the HD SDI video output you need to use a signal converter You can set the video output type to either NTSC or PAL page 29 Video Cable The cable connecting the camera s video output and a monitor is a BNC coaxial cable as shown below If the distance between the camera and the monitor exceeds the recommended maximum please u
6. You can specify up to 4 motion detection areas to your preference Select the desired type of motion detection area According to the selected area type top bottomV left right coordinates change AREA Specify the use of the selected motion detection area If selected lt ON gt the area is marked on the screen ALARM OUT Specify the use of output signal on motion detection UP DOWN LEFT RIGHT Change the position of the selected area SENSITIVITY The lower the figure is the higher the sensitivity is and the camera can track a slightest movement RETURN Save the motion detection settings and return to the OPERATION SETUP menu N Motion detection area is marked only in MOTION DET menu and not displayed on the monitoring Screen e PRIVACY Mask an area you want to hide on the screen PRIVACY AREA SETUP 1 When the SPECIAL menu screen is displayed press the Function Setup switch so that the arrow indicates lt PRIVACY gt 2 Set up the mode using the Function Setup switch AREA You can select up to 16 PRIVACY areas MODE Determines whether to use the area selected in the AREA MASK COLOR Determine area color You can select Green Red Blue Black White Gray TOP BOTTOM LEFT RIGHT Adjust the size and position of the selected area RETURN Select this to save the PRIVACY menu settings and return to the SPECIAL menu AREA AREA MODE MASK COLOR TOP BOTTOM LEFT RIGHT RETURN
7. lt 5 1 2 3 4 5 6 re 8 30_ Operating Your Camera e COMM ADJ Communication Adjustment This function sets up the camera an communication status when controlling the PROTOCOL SAMSUNG T camera through an external control device m en 1 When the SPECIAL menu screen is displayed UART MODE 8 N 1 oress the Function Setup switch so that the adi OFF arrow indicates lt COMM ADJ gt RETURN A 2 Set up the mode using the Function Setup Switch PROTOCOL Select the communication PROTOCOL GAMSUNG T SAMSUNG E Pelco D Pelco P Bosch Honeywell Vicon Panasonic GE AD CAM ID Determines the camera s identification number between O and 255 BAUD RATE You can select 2400 4800 9600 19200 38400 57600 bps UART MODE You can select NONE EVEN or ODD for the parity bits DISP ID Display camera title on top left corner of the screen RETURN DATA Specify whether to return the same command to the controlling device when a control command is delivered to the camera VYJNVI UNOA ONILVUAdO 6 LANGUAGE You can select the menu language according to your requirements e RESET Resets the camera settings to the factory defaults Communication Language and Monitor settings are not initialized RETURN Select this to save the SPECIAL menu settings and return to the MAIN SETUP menu EXIT Save the current settings and exit the MAIN SETUP menu English _31 appenaix SPECIFICATI
8. the table above you may encounter a voltage sag depending on the wire length If you use an excessively long wire for camera connection the camera may not work properly Voltage for proper camera operation DC 12V 10 AC 24V 10 Voltage drop shown in the table above may show difference from the actual depending on the manufacturer and cable type NOILOANNODO 8 NOLLVTTVLSNI 6 RS 485 Communications Using RS 485 communication the camera menu can be accessed using Samsung Techwin s System Controller or the DVR e For accessing the camera from a computer Use a RS 485 converter to connect the camera s control port with the computer s serial cable Ex Serial port COM1 of computer gt Serial Cable gt RS 485 Converter gt Camera s RS 485 control port e For accessing the camera from a DVR or the System Controller connect the camera s RS 485 and RS 485 terminals to the RS 485 control board s terminals of desired device with a RS 485 cable TRX and TRX Control ports of RS 485 Controller RS 485 ports of the camera CONNECTION TERMINAL TRX 485 CONNECTION TERMINAL TRX 485 Default RS 485 communication settings Item Transfer Rate Communication Mode Return Data Default 9600 8 NONE 1 Not used N When constructing a proprietary controller for direct camera control apply Pelco D or Samsung Techwin protocol Use only a DVR model that supports HD SDI saving English _17 Operating Your Ca
9. Bracket 12_ installation amp connection Installation 1 Arrange the cables through the bracket to Mount the camera body onto the bracket Close the top cover Use the provided screws xs to fix the bracket to a desired position ceiling or wall Ensure that the lt CAMERA FRONT label on the bracket faces the direction for camera monitoring the ceiling or wall If you drill a hole in the ceiling cover for wiring press hard to remove the cover and attach the dust proof plate to it and arrange the cables through the plate If you intend to arrange the cables without drilling a hole use the empty area opposite to the lt CAMERA FRONT gt label side for the wiring purpose Align the marking hole of the camera body with the lt CAMERA FRONTS label of the bracket and turn the body in the lt LOCK gt direction NOILOANNODO 8 NOLVTIVLSNI 6 Refer to Adjusting the monitoring direction for the camera to adjust the lens in a desired direction Fit the top cover into the fixing tips of the camera body and turn the cover clockwise English _13 Installation amp connection Adjusting the monitoring direction for the camera Panning Tilting Cover Front 4 Adjusting the monitoring direction You can adjust the camera direction only when the camera is fixed on the ceiling Where rotating the camera unit to the left or right is called Pan and adjusting the tilt is called Tilt
10. ON Items Description Video 1 3 Progressive Scan CMOS Total Pixels 2 010 H x 1 108 V 2 2M Pixels Effective Pixels 1 944 H x 1 092 V 2 1M Pixels Video Scanning System Progressiv Scan Min Illumination Color 1Lux F1 2 0 017 Lux Sens up 60x l B W 0 1 Lux F1 2 0 0017 Lux Sens up 60x S N Ratio 50dB AGC off Weight on Video Output SMPTE292M HD SDI Monotoring CVBS Lens Type DC Auto Iris Lens 3 8 5mm 2 8X Motorized Vari focal Lens Type Mount Type Board type Operational On Screen Display Camera Title Multi language Support English Korean Japanese Spanish French Portuguese Chinese German Italian Russian Czech Polish Rumanian Serbian Swedish Denish Turkish Thai Taiwanese Off On Displayed 15 characters Day 8Night Auto ICR Color BAN External Backlight Compensation Off User BLC HLC Contrast Enhancement SSDR Off On Digital Noise Reduction SSNRIII Off On Motion Detection 32_ appendix Motion Detection Off On Items Description Privacy Masking Off On 16 Rect angle zones a en Gain Control Off Low Middle High White Balance ATW Outdoor Indoor Manual AWC 1 700K 11 000K Operational oo Shutter EseV AFLK Manual Digital Zoom Off On 1x 16x Reverse Off H Rev V Rev HV Rev Communication RS 485 Br oipcal RS 485 SAMSUNG T SAMSUNG E Pelco D Pelco P Bosch Honeywel
11. PECIAL gt by using the Function Setup switch so that the arrow indicates lt SPECIAL gt MAIN SETUP LENS EXPOSURE lt 3 WHITE BAL SSDR BACKLIGHT SSNR3 DAY NIGHT SPECIAL c EXIT CONDARWN 2 Select a desired mode using the Function Setup wich SPECIAL CAM TITLE IMAGE ADJ lt 5 MOTION DET PRIVACY COMM ADJ LANGUAGE ENGLISH RESET RETURN c 1 2 3 4 9 6 7 8 English _27 Operating Your Camera e CAM TITLE If you enter a title the title will appear on the monitor 1 Ifthe SPECIAL menu screen is displayed use the Function Setup switch so that the arrow indicates lt CAM TITLE gt 2 Set it to lt ON gt by using the Function Setup Switch CAM TITLE SETUP 3 Press the Function Setup switch 4 Use the Function Setup switch to move to a desired letter and select the letter by pressing the Function Setup switch Repeat this to enter multiple letters You can enter up to 15 letters 5 Enter a title move the cursor to lt POS gt and press the Function Setup switch The entered title appears on the screen Select the position to display the title on the screen by using the Function Setup switch and press the Function Setup switch When the position is determined select lt END gt and press the Function Setup switch to return to the SPECIAL menu 11 to Locate then SET N When the CAM TITLE menu is OFF no title will be displayed o
12. Reduction Function The high performance WN2 DSP chip effectively removes low light gain noise and afterimage to provide clear images even in dark environments e Electrical Day amp Night This camera has a function that automatically selects the mode that is appropriate for daytime or night time conditions The COLOR mode operates in daytime conditions to provide optimum colors and B W mode operates in night time conditions to enhance the definition of the image e Motion Detection Since the camera detects motion without any additional external sensor you can monitor activity more efficient e SSDR Samsung Super Dynamic Range For images with high contrast between bright and dark areas from difficult lighting conditions such as backlighting this camera selectively illuminates darker areas while retaining the same light level for brighter areas to even out the overall brightness e Miscellaneous Functions HLC High Light Compensation SENS UP FLIP H V REV D ZOOM and PRIVACY functions are provided e OSD By providing multi lingual user friendly OSD On screen Display menu the camera provides easy handling of the camera 8 overview WHAT S INCLUDED Check if the main unit and all the following accessories are included in the product package Appearance em Name e Quantity Description Camera LJ User Manual lron Screw Cable for the testingmonitor MAIAYSAO 6 Used for fixing to an iron plate Used to test the c
13. SET To find the optimal luminance level for the current environment point the camera towards a sheet of white paper and press the Function Setup switch If the environment changes readjust it VYJNVI YNOA ONILVUAdO 6 WB MANUAL KA White Balance may not work properly under the following conditions In this case select the AWC mode When the ambient illumination of the subject is dim lf the camera is directed towards a fluorescent light or is installed in a place where illumination changes dramatically the White Balance operation may become unstable English _23 Operating Your Camera SSDR SAMSUNG SUPER DYNAMIC RANGE SSDR illuminates darker areas of an image while retaining the same light level for brighter areas to even out the overall brightness of images with high contrast between bright and dark areas 1 When the SETUP menu screen is displayed select lt SSDR gt by using the Function Setup switch so that the arrow indicates lt SSDR gt MAIN SETUP LENS EXPOSURE lt 3 WHITE BAL SSDR BACKLIGHT SSNR3 DAY NIGHT SPECIAL EXIT 2 Use the Function Setup switch to change the SSDR level in the sub menu according to the contrast between bright and dark areas y ep A o oi GN e LEVEL Adjust the dynamic range level e D RANGE Select the amplitude area of the dynamic range LEVEL es x 8 D RANGE NARROW RETURN lt SSDER SETUP
14. VEL LEVEL 2 TOP MASK TONE 3 BOTTOM TOP 4 LEFT BOTTOM 5 RIGHT LEFT 6 RETURN lt 5 RIGHT RETURN c N Because there can be a difference in the effectiveness of HLC according to the amount of light area in the screen optimize the installation angle for the best HLC performance When dark the HLC is only activated when a bright light exceeding a specific size In NIGHT ONLY mode The HLC is not activated in day light or when bright light is not present at night In NIGHT ONLY mode English _25 Operating Your Camera SSNR3 This function reduces the background noise in a low luminance environment 1 When the SETUP menu screen is displayed select lt SSNR3 gt by using the Function Setup MAN SEIU switch so that the arrow indicates lt SSNR3 gt 2 Select a desired mode using the Function Setup switch e ON Activates SSNR3 so that noise is reduced e OFF Deactivates SSNR3 Noise is not reduced 3 Set the SSNR3 mode to lt ON gt and press the Function Setup switch Then you can adjust the noise reduction level LENS EXPOSURE lt 3 WHITE BAL SSDR BACKLIGHT SSNR3 DAY NIGHT SPECIAL c EXIT v sonnupuwun You cannot set the SSNR3 to ON or OFF when the AGC mode of the EXPOSURE menu is OFF When adjusting the noise reduction level in the SSNR3 mode remember that the higher the level set the more the noise level will be reduced as wil
15. amera connection to a portable display device Dustproof Plate Preventing dust inflow English _9 Overview AT A GLANCE Appearance Item Top cover Description Case cover used to protect the lens and the main unit Covers the lens and camera body 1 2 Camera Case 8 Povver Port 4 VO Port Used to plug the power cable 1 GND Earth grounding port for external signal 2 EXT_D N External signal reception port for Day Night mode setup 3 MD_OUT Output port that signals when a motion is detected A RS 485 RS 485 signal port for RS 485 communication 5 RS 485 RS 485 signal port for RS 485 communication HD SDI Video Out terminal 10 overview BNC terminal for HD SDI video signal output Inside Item 1 SETUP switch 2 c vpeo 3 Wiring Cover Lock Release MAIAUAANO 6 Description The switch is used for setting and adjusting the camera s functions and properties Press and hold this switch more than 2 seconds to display the main menu on the screen Move this switch left or right to move the cursor or change gt the value in the menu Move this switch up or down to move the cursor in the menu A V Press the switch to set the function in menu To move to a sub menu item in the menu press this switch Analogue video output terminal of C Video Use a monitor cable for testing the camera with a portable d
16. attempt to service this apparatus yourself e Do not place a glass of water on the product e Do not install near any magnetic sources e Do not block any ventilation openings e Do not place heavy items on the product e Do not expose the camera to radioactivity User s Manual is a guidance book for how to use the products The meaning of the symbols are shown below e Reference In case of providing information for helping of product s usages e Notice If there s any possibility to occur any damages for the goods and human caused by not following the instruction Please read this manual for the safety before using of goods and keep it in the safe place 6_ overview CONTENTS OVERVIEW INSTALLATION amp CONNECTION OPERATING YOUR CAMERA APPENDIX O 0 Q o 12 15 18 19 32 35 Important Safety Instructions Product Features What s Included At a Glance Installation Connecting with other Device Menu Configuration Menu Setup Specification Product Overview Troubleshooting English _7 MAIAYSAO 6 Overview PRODUCT FEATURES e Supports Full HD SDI Video By adopting a diagonal 6mm 1 3 2M pixel CMOS the camera produces clear picture quality e Excellent low illumination image quality By adopting high sensitive colour CMOS the camera provides clear image quality under a severe low illumination condition of 0 017 Lux with SENS UP x60 e SSNR3 Samsung Super Noise
17. ble specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Unplug this apparatus during lighting storms or when unused for A long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped English _3 Overview WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL EXPLANATION OF GRAPHICAL SYMBOLS The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a
18. er household waste at the end of their working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic accessories should not be mixed with other commercial wastes for disposal X Correct disposal of batteries in this product Applicable in the European Union and other European countries with separate battery return systems This marking on the battery manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life Where marked the chemical symbols Hg Cd or Pb indicate that the battery contains mercury cadmium or lead above the reference levels in EC Directive 2006 66 If batteries are not properly disposed of these substances can cause harm to human health or the environment To protect natural resources and to promote material reuse please separate batteries from other types of waste and recycle them through your local free bat
19. he automatic scene accumulation multiplier for low illumination operation x2 x60 The greater the video accumulation factor is the brighter the screen is but the afterimage of a moving object grows accordingly Although noise spots and whitish symptoms may occur in higher accumulation this is normal If the gain control AGC of EXPOSURE mode is set to OFF SENS UP mode is accordingly set to 22 Operating Your Camera WHITE BAL WHITE BALANCE Use the White Balance function to adjust the screen color 1 When the SETUP menu screen is displayed select lt WHITE BAL gt by using the Function NEN Setup switch so that the arrow indicates lt WHITE BAL gt 2 Select a desired mode using the Function Setup switch LENS EXPOSURE c WHITE BAL SSDR KA vovosoanpon BACKLIGHT SSNR3 DAY NIGHT SPECIAL c EXIT Select one of the following 5 modes as appropriate for your purpose e ATW Select this when the color temperature is between 2 400 K and 11 000 OUTDOOR Select this when the color temperature is between 1 700 K and 11 000 K sodium light inclusion e INDOOR Select this when the color temperature is between 4 500 K and 8 500 K e MANUAL Select this to fine tune White Balance manually Set White Balance first by using the ATW or AWC mode After that switch gt 1 RED GAIN to MANUAL mode fine tune the White Balance 2 feruay es and the Function Setup switch e AWC
20. isplay for installation If you drill a hole in the wiring cover for wiring remove the cover and attach the provided dustproof plate to it and arrange the cables through the plate The dust proof plate is to prevent outside dust from inflow to the wiring compartment To separate the bracket from the main unit for the installation or to separate the camera from an installed camera push this release and turn the main unit in the marked direction of lt UNLOCK gt English _11 Installation amp connection INSTALLATION Precautions before installation Ensure you read out the following instructions before installing the camera e Select an installation site ceiling or wall that can endure at least 5 times of the camera weight e Stuck in or peeled off cables can cause damage to the product or a fire e For safety purposes keep anyone else away from the installation site And put asid personal belongings from the site just in case Disassembling 1 Take the camera body with one hand and take the top cover with the other hand Then turn the cover counter clockwise to remove it Top cover Camera Body 2 Hold down the lock lever in the outer direction as shown and turn the camera body in the lt UNLOCKs direction counter clockwise to remove the bracket from the body f it fails take the bottom hole of the bracket and turn the bracket in the lt LOCK gt direction clockwise to remove it
21. ject to change without prior notice e The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product Note that the security and other related issues caused by the unchanged password shall be responsible for the user Overview IMPORTANT SAFETY INSTRUCTIONS N O 0 SS hos 10 11 12 13 14 Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water MAIAYSAO 6 Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Use only with the cart stand tripod bracket or ta
22. l Vicon Panasonic GE AD Operating Temperature 0 C 50 C 90 RH Environmenta Humidity Input Voltage Current Dual 24VAC 10 amp 12VDC 10 Electrical Power Consumption Max 6W Color Material Body Ivory Plastic Mechanica Dimension OxH 0133 0 x H129 4mm Weight 5379 HD SDI L 5C2V 750hm Max 100 140m Transmission Distance L 6CHD 75 ohm Max 200m The maximum transferrable distance of HD SDI video signal depends on the cable manufacturer or installation conditions When a BNC cable adaptor is used to combine two or more BNC cables for distributed HD SDI video transfer make sure the impedance of the adaptor is 750 Otherwise the adaptor may cause shorter transfer distance or broken video transfer due to loss of transferred signal English _33 XIGNAddV 6 appenalx PRODUCT OVERVIEW Unit mm inch 133 0 6 24 La i E we Zn TF 5 a Fa 7 Pi S H 1 34_ appendix TROUBLESHOOTING PROBLEM Nothing appears on the screen SOLUTION e Check that the power cord and line connection between the camera and monitor are properly connected When the camera s HD SDI BNC output is directly connected to the monitors BNC terminal Make sure the monitor supports HD SDI signal input When the camera s HD SDI BNC output is connected to the DVR Make sure the DVR s
23. l the brightness of the image DAY NIGHT You can display pictures in color or in black and white 1 When the SETUP menu screen is displayed l MAIN SETUP select lt DAY NIGHT gt by using the Function er Setup switch so that the arrow indicates lt DAY 2 EXPOSURE lt 5 NIGHT gt 3 WHITE BAL l l l 4 SSDR 2 Select a desired mode using the Function 5 BACKLIGHT Setup switch according to the picture display 6 SSNR3 gt 7 DAY NIGHT YOU Ari 8 SPECIAL lt 5 e COLOR The picture is always displayed in 9 EXIT color e B W The picture is always displayed in black and white 26_ Operating Your Camera e AUTO The mode is switched to lt COLOR gt in anormal environment but switches to lt B W gt neuer mode when ambient illumination is low To set gt 1 COLOR gt B W up the switching time for AUTO mode press ann the Function Setup switch 2 COLOR gt B W DWELL TIME You can select day night el a e Na I fe switching delay time from 3 SPECIAL lt 5 U 5s 78 10s 15s 20s 30s 40s 60s D DURATION Adjust the brightness of the lighting where the mode switch occurs 2 e EXTERN Control the image modes of Color and B W when an external controller is 2 synchronized via the Alarm In port gt N When AGC in the EXPOSURE menu is OFF mode operates as selecting AUTO mode cannot m be selected gt SPECIAL 1 When the SETUP menu screen is displayed select lt S
24. mera MENU CONFIGURATION MAIN SETUP LENSa e DC e BRIGHINESS e SHUTTER e AGC EXPOSURE e SENS UP e RETURN e ATW e QUTDOOR e INDOOR WHITE BAL e MANUAL e AWC gt SET SSDR e OFF e ON BACKLIGHT e OFF e BLC e HLC SSNR3 e ON e OFF e AUTO e EXTERN e COLOR DAY NIGHT e BW e CAM TITLE e IMAGE ADJ e MOTION DET SPECIAL e PRIVACY e COMM ADJ e LANGUAGE e RESET e RETURN EXIT e EXIT 18_ Operating Your Camera MENU SETUP To configure the camera s function settings use the button on the rear side of the product VUJNVO UNOA ONILIVUAdO 6 e AV Moves up down in menu e lt p gt Moves right left in menu e SET Press the switch to set the function in camera menu To move to a sub menu item in the menu press this switch 1 Press the SET button e Enters the function menu The selected function s menu appears on the monitor MAIN SETUP LENS Use right left buttons EXPOSURE cd to change the WHITE BAL selection SSDR BACKLIGHT SSNR3 DAY NIGHT SPECIAL lt 5 EXIT Use up down buttons to set the desired item 1 2 3 4 5 6 7 8 9 2 Use the Up Down buttons to select a desired function e Move the button up or down to move the arrow up or down Set the arrow to indicate the desired item English _19 Operating Your Camera 3 Use the Up Down buttons to select a desired function e Move the button right or left to display available values or settings Set the de
25. n D ZOOM You can use a digital zoom of x1 x16 SHARPNESS As you increase this value the picture outline becomes stronger and clearer Adjust this value appropriately depending on the sharpness of the picture FONT COLOR You can change the OSD font color White Yellow Green Red Blue VIDEO FORMAT Sets the video output format of the C Video port on the camera provided for test and installation VIDEO SIZE Sets the image resolution of the HD SDI output of the camera Select the desired setting and press the SET button 1080i 50 1080p 30 720p 50 720p 60 1080i 60 RETURN Select this to save the settings for the IMAGE ADJ menu and to return to the SPECIAL menu N s f you increase the sharpness level excessively the image may be displayed abnormally or it can cause a noise English _29 VYANVS UNOA ONILVUAdO 6 Operating Your Camera e MOTION DET This product has a feature that allows you to observe movement of objects in 4 different areas on the screen and the words lt MOTION DET gt appear on the screen when movement is detected You can monitor activity more efficient 1 When the SPECIAL menu screen is displayed press the Function Setup switch so that the arrow indicates lt MOTION DET gt 2 Set up the mode using the Function Setup switch MOTION DET AREA MODE ALARM OUT TOP BOTTOM LEFT RIGHT SENSITIVITY RETURN c 1 2 3 4 5 6 T 8 9 AREA SEL
26. n is not available Check RS 485 communication settings English _35 XIGNAddV This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense Samsung Techwin cares for the environment at all product manufacturing stages and is taking measures to provide customers with more environmentally friendly products The Eco mark represents Samsung Techwin s devotion to creating environmentally friendly RoHS compliant products and indicates that the product satisfies the EU RoHS Directive Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This marking on the product accessories or literature indicates that the product and its electronic accessories e g charger headset USB cable should not be disposed of with oth
27. n the monitor screen even if you enter one Only English is available in this mode f you move the cursor to CLR and press the Function Setup switch all the letters are deleted To edit a letter change the cursor to the bottom left arrow and press the Function Setup switch Move the cursor over the letter to be edited move the cursor to the letter to be inserted and then press the Function Setup switch 28_ Operating Your Camera e IMAGE ADJ 1 When the SPECIAL menu screen is displayed select lt IMAGE ADJ gt by using the Function Setup switch so that the arrow indicates lt IMAGE ADJ gt SPECIAL CAM TITLE ON IMAGE ADJ lt f MOTION DET ATW PRIVACY ON c COMM ADJ ON LANGUAGE ENGLISH RESET RETURN lt ONOAoORWD 2 Select a desired mode using the Function Setup switch IMAGE ADJ MONTIOR LCD lt H REV OFF V REV OFF D ZOOM OFF SHARPNESS ON lt FONT COLOR WHITE VIDEO FMT CVBS NTSC VIDEO SIZE 1080p 30 c RETURN c Monitor Please change the settings value of video appropriate to your monitor e LCD Please select this menu item when using an LCD monitor e USER Please use this menu item when using a monitor other than standard ones You can change the gamma PED level and color gain in the sub menus 1 2 3 4 5 6 7 8 9 V REV You can flip the picture vertically on the screen H REV You can flip the picture horizontally on the scree
28. s an auxiliary video amp Maximum video transfer Recommended cable distance specification 100 140m L 5C2V 7 bohm 200m L 6CHD 750hm SDI specific Cable English _15 Installation amp connection External Day Night Switching Input Day Night mode of the camera can be switched by signal from an external device 4 To use this function lt DAY NIGHT gt setting of the camera should be set to the lt EXTERN gt Page 27 Motion Detection Signal Out Upon a motion detection the port outputs signal for an external device for display or operation When a motion is detected the port outputs 3 3V signal 9 To use this function lt ALARM OUT gt setting of the camera should be set to lt ON gt Page 30 Power Supply Use the screwdriver to connect each line of the power cable to the corresponding power port ofthe camera Be careful not to reverse the polarity when you connect the power cable Be sure to turn the power off the device to be connected gee da gt 200 ca El Et Se For AC DC Power Supply You can use either one of AC 24 V 500 mA and DC 12V 500 mA adaptor 16_ installation amp connection Resistance of copper wire at 20 C 68 F Wire specification AWG 24 0 22mm 18 0 83mm Resistance N m 0 018 Voltage Drop V m 0 006 Recommended Distance m Less than 30 e As shown in
29. sired setting value using the button 4 To finish select lt EXIT gt and press the SET button 4 An item with the icon also has sub menus To select a sub menu select an item with the icon and press the Function Setup switch An item with the icon is unavailable due to function settings LENS Using this function you can control the screen brightness 1 When the SETUP menu screen is displayed select lt LENS gt by using the Function Setup switch so that the arrow indicates lt LENS gt MAIN SETUP LENS EXPOSURE lt WHITE BAL SSDR BACKLIGHT SSNR3 DAY NIGHT SPECIAL c EXIT 2 Adjust the focus automatically or manually when SETUP menu screen is displayed 1 2 3 4 5 6 T 8 9 e DC ONE PUSH Adjust the focus automatically u pee MANUAL Adjust the zoom and focus Stine manually using the Function Setup switch RETURNL lt 20_ Operating Your Camera EXPOSURE 1 When the SETUP menu screen is displayed select lt EXPOSURE gt by using the Function MAIN SETUP Setup switch so that the arrow indicates LENS 1 2 EXPOSURE lt 5 lt EXPOSURE gt MAN x 2 Select a desired mode using the Function 4 SSDR 5 BACKLIGHT u Setup switch Ess gt e BRIGHTNESS Adjust the screen brightness 7 DAY NIGHT gt 8 SPECIAL lt f O 9 EXIT lt O S e SHUTTER You can select the shutter o ee ed E EXPOSURE SETUP I BRIGHTNESS m A FLK Select this when you experience
30. tery return system SALES NETWORK SAMSUNG TECHWIN CO LTD Samsungtechwin R amp D Center 701 Sampyeong dong Bundang gu Seongnam si Gyeonggi do Korea 463 400 TEL 82 70 7147 8740 60 FAX 82 31 8018 3745 SAMSUNG TECHWIN AMERICA Inc SAMSUNG TECHWIN EUROPE LTD 100 Challenger Rd Suite 700 Ridgefield Park NJ 07660 Samsung House 1000 Hillswood Drive Hillswood Business Toll Free 1 877 213 1222 Direct 1 201 325 6920 Park Chertsey Surrey UNITED KINGDOM KT16 OPS Fax 1 201 373 0124 TEL 44 1932 45 5300 FAX 44 1932 45 5325 www samsungcctvusa com www samsungtechwin com www samsungsecurity com
31. upports HD SDI signal input HD SDI output is converted into other format such as DVI and VGA by using video converter Make sure the converter s HD SDI input format supports the product s output video format The image on the screen is dim Is lens stained with dirt Clean your lens with soft clean cloth Set the monitor to the proper condition If the camera is exposed to very strong light change the camera position The image on the screen is dark The camera is not working properly and the surface of the camera is hot The SENS UP function does not work Adjust the contrast feature of the monitor Check that you have properly connected the camera to an appropriate power source Check that AGC of EXPOSURE SETUP menu is OFF The Motion Detection function does not work Check that MOTION DET of SPECIAL SETUP menu is OFF Color is not correct Check the setting of WHITE BAL SETUP menu The screen flickers continually Ensure the camera is not pointing towards the sun Is the camera framing the sun or other bright light source HD SDI video may not appear to be normal if distance exceeds the maximum transferrable distance When a BNC cable adaptor is used to combine two or more BNC cables for distributed HD SDI video transfer make sure the impedance of the adaptor is 750 Otherwise it may cause shorter transfer distance or broken video transfer RS 485 communicatio
Download Pdf Manuals
Related Search