Addonics CA256USB
Contents
1. User Guide CipherUSB CA256USB www addonics com va 1 11 Technical Support If you need any assistance to get your unit functioning properly please have your product information ready and contact Addonics Technical Support at Hours 8 30 am 6 00 pm PST Phone 408 453 6212 Email http www addonics com support query Initial Setup This procedure only needs to be done when setting up the CipherUSB for the first time or when a new password is desired The CipherUSB will retain the last password it was programmed with and otherwise does not require any driver or software to work 1 Connect the CipherUSB to a computer running Windows and connect a USB storage device into the CipherUSB The CipherUSB will not respond until a working storage device is connected to its USB device port 2 Insert the CipherUSB password utility disc If an Autorun menu appears select Run CipherUSB exe or browse to your CD drive using Windows Explorer and launch the CipherUSB program If the utility CD is not available the utility can be downloaded from http www addonics com drivers files CipherUSB zip If you are setting up the CipherUSB for the first time the following dialog box should appear CipherUSB Security Code V1 3 2 3 Click OK to proceed to the utility Choose a password as short or as long up to 32 characters as desired and enter it into the Setup and Confirm fields Then click Start www addonics2. DROM Image file path A CORON Start Programming www addonics com Technical Support M F 8 30am 6 00pm PST Phone 408 453 6212 Email www addonics com support query 1 Read the firmware update for important changes to the unit s operation or the update procedure If a firmware release note contradicts these instructions follow the release notes instead 2 Insert the CipherUSB with a storage device The CipherUSB will not respond unless a storage device is attached to it 3 Run the CipherUSB exe program lf the CipherUSB unit has not been initialized with a password the Update Firmware tab will not appear Initialize the unit with a password unplug it plug it back in then select the Update Firmware tab 4 Be sure the DX Information section shows AES Length is 256 and ECB mode is selected 5 In the Update new firmware section click the Firmware button Change the file type to BinaryFile 256 if neces sary then browse to the folder containing the new firmware and open it 6 Click the Start Programming button A dialog will shortly appear instructing you to remove the CipherUSB and reinsert it After removing and reinserting the device the firm ware update will be completed Note The CipherUSB may or may not need to be initialized with the password again If a storage device using the existing pass word is connected when the CipherUSB is reinserted and the file system appears intact the password has been re
3. com Technical Support M F 8 30am 6 00pm PST Phone 408 453 6212 Email www addonics com support query y E CipherUSB Security Code V1 3 2 Key Recovery Addonics Initializing CipherUSB by setting up your Recovery Password Setup Recovery Password Setup Your Recovery Password Case sensitive and up to 32 characters Confirm Your Recovery Password Start Copyright 2012 Enova Technology Corporation All rights reserved This utility program is subject to change and upgrade without notice and does not represent a commitment on the part of Enova Technology This utility program is provided under a license agreement or non disclosure agreement lt is unlawful for any person persons organization or entity to copy reproduce reverse engineering or transmit electronically any part of the program without the written permission of Enova Technology www enowatech com CAUTION KEEP YOUR PASSWORD SAFE AND REMEMBER IT OTHER CipherUSB DEVICES CAN USE THE SAME PASSWORD TO UNLOCK MEDIA ENCRYPTED BY THIS DEVICE IF THE PASSWORD IS LOST THE DATA IS LOST THERE IS NO BACK DOOR TO UNLOCK OR RECOVER THE PASSWORD OR THE ENCRYPTION KEY After confirming once more for security the CipherUSB will be programmed with a 256 bit encryption key seeded by the pass word Once the CipherUSB has been programmed a dialog will appear instructing you to remove the device and reinsert it then the program will close automatically After r
4. emoving and reinserting the CipherUSB it will be properly initialized Note All new data written to the drive will be encrypted Any sec tors that are not yet overwritten may still contain unencrypted data if the drive has been used before This unencrypted data is no longer accessible to the OS but can still possibly be recovered by special data recovery software www addonics com Technical Support M F 8 30am 6 00pm PST Phone 408 453 6212 Email www addonics com support query Using the CipherUSB With Storage Data that is encrypted will only be readable when the device is connected to a computer through a CipherUSB programmed with the correct password When a device is connected through a CipherUSB unencrypted data or data that is encrypted using a CipherUSB programmed with a different password will not be readable For hard drives and flash media devices all sectors written including the boot record and file system are encrypted by CipherUSB For optical media individual sessions are encrypted and will be unreadable without a correct CipherUSB This means optical discs may be either entirely encrypted or created with multiple sessions with and without encryption Updating Firmware 7 Bl CipherUSB Security Code V1 0 0 Key Recovery Update Firmware DX Information Firmware version Information AES Length Fw Revision Number PON Addonics PA Time Code WEF Update new firmware Firmware binary file and C
5. tained Otherwise it may be necessary to set the password again www addonics com Technical Support M F 8 30am 6 00pm PST Phone 408 453 6212 Email www addonics com support query CONTACTUS www addonics com Phone 408 573 8580 Fax 408 573 8588 Email http www addonics com sales query
Download Pdf Manuals
Related Search