Kramer Electronics 30.5m 15−pin
Contents
1. KRAMER ELECTRONICS C GM XX FAMILY OF NON PLENUM INSTALLATION CABLES INTRODUCTION Thank you for your purchase of Kramer s single ended installation cables They are designed to be pulled through a wall raised floor ceiling table or other hidden space then have the bare end terminated with either another 15 pin or 5 BNC connectors for RGBHV Please note that the C GM XX family is not plenum rated If local codes require plenum rated cables see Kramer s CP GM XX family DESCRIPTION Kramer s C GM XX cables are built with a high quality molded 15 pin high density VGA type connector permanently installed on one end and only the exposed 5 coaxes on the other The raw cable used for is Kramer BC 5X28 which contains 5 high resolution mini coaxes color coded red green blue yellow and black which will correspond to red green and blue video plus separate horizontal and vertical sync in that order Since there are only 5 coaxes it is not possible to pass extra pins for plug amp play or ID bit support INSTALLING A VGA CONNECTOR We recommend using a high quality solder type VGA connector such as Kramer s model 2551 815004 This item can be obtained from the same vendor you purchased the cable from Each of the 5 coaxes are already prepped by separating the outer shield from the center conductor using heat shrink then each exposed tip has been tinned making it easier to solder to the pins of a VGA connector Here is the recom2. mended pin configuration for typical VGA INSTALLING 5 BNC S Using Kramer s high quality radial compression termination system or other system compatible with typical 26 28 gauge mini coax install BNC s on each of the 5 coaxes noting the following color scheme Red coax Red video Green coax Green video Blue coax Blue video Yellow coax Horizontal sync Black coax Vertical sync
Download Pdf Manuals
Related Search