Metra Dash kit
Contents
1. 6782 for more information and take steps toward a better tomorrow Metra recommends MECP certified technicians LE 99 7879 Dash Disassembly 1 Unclip and remove the lower dash panel cover above the pocket and remove the 8mm Phillips screw Figures A and B 2 Unclip and remove the radio from the dash Tip start at the top of the radio Figure C 3 Unplug and remove the radio Continued to kit assembly Figure C LE f 99 7879 Kit Assembly 1 Remove the center top clip off of the factory radio and install onto the 99 7879 install kit 2 Follow the diagram to attach the necessary clips to the radio housing in the proper locations Red factory clip 3 4 Air bag light Metal clip Figure A Remove 2 phillips screws holding the factory hazard switch for the factory panel and install into the 99 7879 re using the factory hardware Remove 2 phillips screws holding the passenger airbag light from the factory panel and install into the 99 7879 using the supplied 6 screws Hazard switch ISO mount radio provision with pocket 1 Locate the factory wiring harness in the dash Metra recommends using the proper mating adapter from Metra or AXXESS Re connect the negative battery terminal and test the unit for proper operation 2 Al2. LE INSTALLATION INSTRUCTIONS FOR PART 99 7879 APPLICATIONS 2011 Honda CR Z 99 7879 KIT FEATURES e Recessed DIN mount radio provision with pocket e ISO radio mount provision with pocket KIT COMPONENTS Radio Housing e B ISO Brackets e C Pocket 11 8X3 8 Phillips Truss Head screws 2 6X3 8 Phillips Pan Head screws 4 White plastic clips G 1 Metal clip F Ir TT PR GE TTTTT PP WIRING amp ANTENNA CONNECTIONS Sold Separately Wire harness 70 1729 Antenna adapter 40 HD10 TOOLS REQUIRED Panel Removal Tool ATHKNGL e Phillips Screwdriver I METRA THE WORLD S BEST KITS 800 221 0932 n metraonline com COPYRIGHT 2004 2011 METRA ELECTRONICS CORPORATION LE f 99 7879 Table of Contents Dash Disassembly Honda CR Z AD TT ehe 3 Kit Assembly ISO mount radio provision with pocket nn 4 5 Caution Metra recommends disconnecting the negative battery terminal before beginning any installation All accessories switches and especially air bag indicator lights must be plugged in before reconnecting the battery or cycling the ignition NOTE Refer Also to the instructions included with the aftermarket radio FAR KNOWLEDGE IS POWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry Log onto www installerinstitute com or call E u 800 354
3. ign the holes in the radio housing brackets with the holes in the ISO DIN Head Unit and secure the brackets to the head unit with the screws included with the unit Figure B 3 Attach the pocket to the bracket Figure B radio housing assembly with the four 8X3 8 Phillips screws provided Figure B 4 Secure the radio housing brackets to the radio housing with four 8X3 8 Phillips screws provided Figure C 5 Reassemble dash in reverse order of disassembly using the supplied 8 screw in place of the factory screw removed in step one figure B of the dash disassembly Figure C LE INSTALLATION INSTRUCTIONS FOR PART 99 7879 REV 5 05 11 METRA THE WORLD S BEST KITS 800 221 0932 n metraonline com COPYRIGHT 2004 2011 METRA ELECTRONICS CORPORATION
Download Pdf Manuals
Related Search