Home
        Philips 4000 series LED TV 26PFL4907
         Contents
1.                        Digital Audio Output jack   Digital Audio  S PDIF  Output to home theaters and other Digital  Audio systems    PC Input jack   VGA cable connection for PC    Component  Y Pb Pr    Composite Video  VIDEO  Input jacks  for VIDEO   Composite Video Input  VIDEO  jack is shared jack with  Component Video Input  Y  jack    Analog Audio  L R  Input jacks    Connects Analog Audio signals from        HDMI DVI   Analog Audio  L R  jacks signal        Component Video   Analog Audio  L R  jacks signal        Composite Video   Analog Audio  L R  jacks signal        PC Connection   Analog Audio  L R  jacks signal with Stereo  mini 3 5mm plug Audio cable on PC     43  HDMI Input jacks                                                                                                        Pc In RGB  IN RGB    ez    Digrtal Audio and video Input from high definition Digrtal devices  a  eam  ea   9 0 00  such as Blu ray disc players  cable boxes and satellite set top    VIDEO Pb    boxes      For HDMI 1 only  In addition to normal HDMI and HDMI DVI functionality  it  outputs TV Audio to an HDMI ARC compliant device  such as a  home theater system     USB wireless network terminal  Connects the supplied USB wireless LAN adapter   15  USB terminal  Data Input from USB Memory Stick only   Do not connect any device to this terminal such as  Digrtal  camera  keyboard  mouse  etc        75 ohm Cable Antenna connection   Signal Input from an antenna  cable or satellite   Headphon
2.              Note          e Alternate audio and Mono Stereo are not available when you watching TV programs  with a cable box or satellite set top box connected through an HDMI cable or  Component Video cables           English    Features       1 Press MENU EXIT and use A Y  lt P to select Setup  then press  OK     2 Use A Y to select Features  then press OK     Closed captions    Channel lock    Caption settings  Sleeptimer  Features Child lock    Change PIN Start now       3 Adjust the following items        Caption settings    Closed Captioning displays the Audio portion of programming as text  superimposed over the video     1 Use A Y to select Caption settings  then press OK     Caption settings Closed captions Off    Caption service CC 1  Digital caption service  CS 1  Digital caption options Reset to default            not to display the Closed Caption  Closed captions On to display the Closed Caption    to display the Closed Caption when  you set to mute    33 English       Digital TV operation  In addition to the basic Closed Caption  DTV has its own Closed    Caption called Digital caption service  Use this menu to change the  settings for Digrtal caption service        Selects one of these before changing   any other item in Caption settings   service menu  Choose CS 1 under normal  circumstances     Digital caption       You can choose the size  font  color  background and other  characteristics of the caption text     Reset to default   OU Can reset the status 
3.         Preparing for the software upgrade  You require the following equipment         APC with web browsing capability        An archive utility that supports the ZIP format   e g  WinZip for Windows or Stufflt for Mac OS         An empty clean formatted USB Memory Stick    Note       e Only FAT DOS formatted portable memory is supported   e Use only software upgrades that can be found on the Philips web site     A Warning    e When the software upgrade is running  don t press any buttons   e Do not remove the USB Memory Stick during the software upgrade     e  fan error occurs during the upgrade  retry the procedure or for further assistance   please contact Call Center                       Downloading the software  Find information and software related to your TV and download the  latest software upgrade file to your PC   1 On your PC  open a web browser and go to  www philips com support   Enter the model number in the    Type the Model Number     field     2   3 Click the desired software to be downloaded   e Decompress the ZIP file    4    Copy the upgrade file to the root directory of the USB Memory  Stick        Upgrading the software    USB upgrade  You can upgrade the software by using USB Memory Stick     1 Connect your USB Memory Stick with the upgrade file to the USB  terminal on the side of your TV     Use A Y to select Software update  then press OK   Use A Y to select USB  then press OK    Use A Y to select the desired Update file    Use  lt P to select Yes 
4.        Items can be selected only when Proxy setting is set to Use        e The range of input numbers for the port number is between O and 65535    If you enter a number larger than 65535  it will be regarded as 65535     e For proxy port  the selected ports may be blocked and not be able to use depending  on your network environment    e Ifthe proxy address is entered with blank only  proxy server setting will be set to  Do not use              Connection test    Perform the following steps to test your Internet connection after you  have connected an Ethernet cable or entered network settings such as  IP address  DNS settings  etc  manually     2 Use A Y to select Connection test  then press OK     3 Press OK to select Start now     e Connection test will start automatically and the test result will  appear right after the connection test finishes        Testing      The test is in progress        Pass Connection test is successfully completed        Fail Connection test failed  Check the connection settings                 4 Press OK to go to the list of network status confirmation screen        e Ifthe connection test passes  you are ready to use Net TV or network upgrade function  using the Internet without making any additional settings    e If the connection test fails  check if the Ethernet cable is connected to this TV properly  or if you have entered all the required details for the wireless LAN connection properly              Continued on next page     English   
5.     Modification is permitted   Any person is hereby  authorized  without fee  to modify such documents and files to  create derivative works conforming to the UnicodeR Standard   subject to Terms and Conditions herein      gt  Any person is hereby authorized  without fee  to view  use   reproduce  and distribute all documents and files solely for  informational purposes in the creation of products supporting the  Unicode Standard  subject to the Terms and Conditions herein     4  Further specifications of rights and restrictions pertaining to  the use of the particular set of data files known as the Unicode  Character Database can be found in Exhibit 1     5  Each version of the Unicode Standard has further specifications  of rights and restrictions of use  For the book editions  Unicode  5 0 and earlier   these are found on the back of the title page   The online code charts carry specific restrictions  All other files   including online documentation of the core specification for  Unicode 6 0 and later  are covered under these general Terms of  Use     6  No license is granted to  mirror  the Unicode website where a  fee is charged for access to the  mirror  site     7  Modification is not permitted with respect to this document  All  copies of this document must be verbatim     EXHIBIT 1    UNICODE  INC  LICENSE AGREEMENT   DAIA FILES AND  SOFTWARE    Unicode Data Files include all data files under the directories    http   www unicode org Public   http   www unicode org 
6.     The data format used by the zlib library is described by RFCs  Request for  Comments  1950 to 1952 in the files http   www ietf org rfc ricl 950 txt   zlib format   rfc1951 txt  deflate format  and rfc1952 txt  gzip format      xmlrpc  XML RPC For C C   License    Copyright  C  2001 by First Peer  Inc  All rights reserved   Copyright  C  2001 by Eric Kidd  All rights reserved     Redistribution and use in source and binary forms  with or without  modification  are permitted provided that the following conditions are  met     Al Redistributions of source code must retain the above copyright  notice  this list of conditions and the following disclaimer     2  Redistributions in binary form must reproduce the above  copyright notice  this list of conditions and the following disclaimer  in the documentation and or other materials provided with the  distribution     3  The name of the author may not be used to endorse or promote  products derived from this software without specific prior written  permission     THIS SOFTWARE 1S PROVIDED BY THE AUTHOR AND  CONTRIBUTORS    AS IS  AND ANY EXPRESS OR IMPLIED  WARRANTIES  INCLUDING  BUT NOT LIMITED TO  THE IMPLIED  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A  PARTICULAR PURPOSE ARE DISCLAIMED  IN NO EVENT SHALL  THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT   INDIRECT INCIDENTAL SPECIAL  EXEMPLARY  OR CONSEQUENTIAL  DAMAGES  INCLUDING  BUT NOT LIMITED TO  PROCUREMENT  OF SUBSTITUTE GOODS OR SERVICES  LOSS OF USE  DATA  O
7.    e TheV Chip can block non rated programs as per     CEA 608 E sec  L 3     If the option  to block NR  None or E programs is used in Movie ratings lock  TV ratings lock   Canada English ratings lock or Canada French ratings lock accordingly    unusual  results may occur and the unit may not receive emergency bulletins or other types  of programming      Emergency Bulletins  Such as EAS messages  weather warnings  and others    Locally originated programming News Political  Public Service  Announcements  Religious  Sports Weather                    Change PIN    Although the default PIN code  0000  is supplied with the unit  you can  set your own PIN code   1 Use A Y to select Change PIN  then press OK     2 Press the NUMBER buttons to enter the new 4 digit PIN code   e Enter PIN code again to confirm     Change PIN    Please enter your current PIN        Note          e Make sure new PIN code and confirm PIN code must be exactly the same  If they are  different  the space is cleared for reentering     e If you have forgotten your PIN code  enter 0711 to reset the PIN code              36 English    Installation       1 Press MENU EXIT and use A W 4  to select Setup  then press  OK     2 Use A Y to select Installation  then press OK     Language English  Channels Autoprogram  Preferences Location    Installation Network Network settings assi    Reset AV settings Start now       3 Adjust the following items        Language       Use A Y to select Language  then press OK     
8.   Video cables combine Red Green   Blue  video cables with Red White Audio  L R  cables  Match the cable  colors when you connect to the TV     Composite   Basic quality       For Analog connections  Composite Video Audio Analog cable usually  combine a Yellow video cable with Red White Audio  L R  cables   With this unit  Yellow cable must be connected to Y  Green  of  Component Video Input jacks     45       Connecting your devices    HDMI Digital connection    HDMI connection offers the highest picture quality   HDMI  High Definition Multimedia Interface  transports high definition  Digital video and multi channel Digital Audio through a single cable        set top box    OUT Blu ray disc player  or    E al   HDMI cable          HD game console    HDMI DVI connection    This unit can be connected to your device that has a DVI terminal   Use an HDMI DVI conversion cable for this connection and it requires  Audio cable for Analog Audio signal as well     cable receiver or  satellite box with the  DVI Output jack          conversion cable      As HDMI DVI  ENS          Audio  L R  cables       e Use an HDMI cable with the HDMI logo  a certified HDMI cable   High Speed HDMI  cable is recommended for the better compatibility    For HDMI connection   e The unit accepts 4801   480p   720p   10801  1080p 24 30 60Hz of video signals  32kHz    44 1kHz and 48kHz of Audio signals    e This unit accepts 2 channel Audio signal  LPCM  only    e This unit accepts only signals in complianc
9.  BEING RENDERED INACCURATE  OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A  FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER  SOFTWARE   EVEN IF SUCH HOLDER OR OTHER PARTY AS  BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES     END OF TERMS AND CONDITIONS  How to Apply These Terms to Your New Libraries    If you develop a new library  and you want it to be of the greatest possible  use to the public  we recommend making it free software that everyone  can redistribute and change  You can do so by permitting redistribution  under these terms  or  alternatively  under the terms of the ordinary  General Public License      To apply these terms  attach the following notices to the library  It is  safest to attach them to the start of each source file to most effectively  convey the exclusion of warranty  and each file should have at least the     copyright    line and a pointer to where the full notice is found      lt one line to give the library s name and a brief idea of what it does  gt   Copyright  C   lt year gt   lt name of author gt     This library is free software  you can redistribute it and or modify it under  the terms of the GNU Lesser General Public License as published by the  Free Software Foundation  either version 2 1 of the License  or  at your  option  any later version  This library is distributed in the hope that it will  be useful  but WITHOUT ANY WARRANTY  without even the implied  warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR  PURPOSE  See th
10.  EVENT  SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR  ANY CLAIM  DAMAGES OR OTHER LIABILITY  WHETHER IN AN  ACTION OF CONTRACT  TORT OR OTHERWISE  ARISING FROM   OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE  USE OR OTHER DEALINGS IN THE SOFTWARE     Permission is hereby granted  free of charge  to any person obtaining a  copy of this software and associated documentation files  the Software    to deal in the Software without restriction  including without limitation    the rights to use  copy  modify  merge  publish  distribute  sublicense  and   or sell copies of the Software  and to permit persons to whom the  Software is furnished to do so  subject to the following conditions     The above copyright notice and this permission notice shall be included  in all copies or substantial portions of the Software     THE SOFTWARE IS PROVIDED    AS IS   WITHOUT WARRANTY OF  ANY KIND  EXPRESS OR IMPLIED  INCLUDING BUT NOT LIMITED  TO THE WARRANTIES OF MERCHANTABILITY  FITNESS FOR A  PARTICULAR PURPOSE AND NONINFRINGEMENT  IN NO EVENT  SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR  ANY CLAIM  DAMAGES OR OTHER LIABILITY  WHETHER IN AN  ACTION OF CONTRACT  TORT OR OTHERWISE  ARISING FROM   OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE  USE OR OTHER DEALINGS IN THE SOFTWARE     MIT X    cURL    COPYRIGHT AND PERMISSION NOTICE  Copyright  c  1996   2009  Daniel Stenberg   lt daniel haxx se gt    All rights reserved     Permission to use  copy  modify  and distribute 
11.  Follow the on screen instructions to complete the installation   System searching  Please wait       Digital channels found  0    Analog channels found  0    1     Auto programming may take more than 20 minutes to  complete     Note          e After setting Autoprogram  using CH     skips unavailable programs automatically   e If you are not receiving a signal from your cable service  contact the cable provider   e If you press bh or during AutoProgram  the setup of TV channels will be canceled     e Even if Autoprogram is completed  the channel setting will be lost if the AC power  cord is unplugged before the unit goes into Standby mode by pressing        e The PIN code will be required once you set a PIN code in the Child and ratings lock   m    p 34    e  f you want to change your PIN code  follow the instruction of Change PIN  m    p 36          57    Weak channel installation    This function lets you add the channels that were not added by the  AutoProgram due to the reception conditions during the initial setup   It is available only when you select Antenna in Installation mode      1 Use A Y to select Channels  then press OK   Use A Y to select Weak channel installation  then press OK   e The PIN code will be required if you have locked channels     Use  lt P to select channel Input box  then use A Y to select a  channel you want to memorize     2  3  4 Use 4   to select Search  then press OK   5    Display will be changed to Store from Search when the channel is  f
12.  Modifications  or  any combination thereof     1 3     Hardware    means any physical device that accepts input   processes input  stores the results of processing  and or provides  output    14     Larger Work    means a work that combines Covered Code or    portions thereof with code not governed by the terms of this  License     1 5      Licensable    means having the right to grant  to the maximum  extent possible  whether at the time of the initial grant or  subsequently acquired  any and all of the rights conveyed herein     1 6     License    means this document     led    1 8      eZ       Licensed Patents    means patent claims Licensable by SGI that are  infringed by the use or sale of Original Code or any Modifications  provided by SGI  or any combination thereof        Modifications     means any addition to or deletion from the  substance or structure of the Original Code or any previous  Modifications  VWWhen Covered Code is released as a series of files   a Modification is     A Any addition to the contents of a file containing Original Code  and or addition to or deletion from the contents of a file  containing previous Modifications     B  Any new file that contains any part of the Original Code or  previous Modifications        Notice    means any notice in Original Code or Covered Code  as  required by and in compliance with this License     1 10     Original Code    means source code of computer software code     un    that is described in the source code
13.  Notice required by Exhibit  A as Original Code  and updates and error corrections specifically  thereto        Recipient    means an individual or a legal entity exercising rights  under  and complying with all of the terms of  this License or a  future version of this License issued under Section 8  For legal  entities     Recipient    includes any entity that controls  is controlled  by  or is under common control with Recipient  For purposes of  this definition     control    of an entity means  a  the power  direct or  indirect  to direct or manage such entity  or  b  ownership of fifty  percent  50   or more of the outstanding shares or beneficial  ownership of such entity     1 12    Recipient Patents    means patent claims Licensable by a Recipient    that are infringed by the use or sale of Original Code or any  Modifications provided by SGI  or any combination thereof     1 13  SGI  means Silicon Graphics  Inc     1 14  SGI Patents    means patent claims Licensable by SGI other than the    eS     Licensed Patents     License Grant and Restrictions     SGI License Grant  Subject to the terms of this License and  any third party intellectual property claims  for the duration  of intellectual property protections inherent in the Original  Code  SGI hereby grants Recipient a worldwide  royalty free   non exclusive license  to do the following   1  under copyrights  Licensable by SGI  to reproduce  distribute  create derivative  works from  and  to the extent applicable 
14.  PII to play the selected files   e Press OKor PI to pause  then press OKor PIE again to  resume   e Press  gt  to skip to the next file   e Press  lt  lt  to return to the beginning of the file currently playing   e Press Mi to stop playback     Press OPTIONS to display the optional menu  then use A Y to  select the desired item                                      Off Sets repeat playback to Off   Repeat On Sets repeat playback for all MP3 files in the  current folder   Off Sets shuffle playback to Off   Shuffle On Sets shuffle playback for all MP3 files in the  current folder   Of The sound will not be output from the unit s  speakers   On The sound will be output from the unit s  TV speakers speakers   You can control Audio Output from your  E connected EasyLink Compliant Devices with  VOL     by using this unit s remote control   A d Selects the sound mode according to your preference   Uto SOUN  Standard  Vivid  Sports  Movie  Music and News   Note       e TV speakers will be displayed only when Master EasyLink is set to On   EasyLink m    p 39          28    Video  MPEG   1 Use A Y to select a file or a folder     Movie4 avi    Movie5 avi an    Movie   av       Movie   avi    Movie8 avi Title     DITA  Date   Duration     2 Press OK or PII to play the selected files    e Press OKor PII to pause  then press OKor  gt H again to  resume    e Press  gt    to fast forward search    e Press  lt q to fast backward search    e Press Mi to stop playback   Press    I to resume f
15.  Setting status  You can check the status of network settings     2 Use A Y to select Setting status  then press OK     e Network setting list will be displayed   e MAC address of this unit will be displayed in the list     Reset network settings   You can reset the status of network settings    2 Use A Y to select Reset network settings  then press OK   3 Press OK to select Start now        Return your settings to default values    When you return picture and sound settings to their default values the  channel installation settings are not affected      1 Use A Y to select Reset AV settings  then press OK   2 Press OK to select Start now     Software       Philips continuously tries to improve its products and we strongly  recommend that you upgrade the TV software when upgrades are available     New software can be downloaded from our website at  www philips com support using the model number of your TV to find  information    1 Press MENU EXIT and use A Y  lt P to select Setup  then press OK   2 Use A Y to select Software  then press OK        Software information sealed   Software update USB  Automatically check for Off  Netflix deactivation   Software Netflix ESN  VUDU deactivation    You Tube deactivation    MediaConnect code    43 English       Checking your current software version    1 Use A Y to select Software information  then press OK     e  he version and a description of the current software is  displayed     Software information    PHL XXXX_XXX_X    Software  
16.  TV    1 Press NET TV     e Net TV screen will appear then use A Y  lt P to select service  Icon     e For the first time only  Philips Terms of Use Internet  Enabled product screen will appear After confirming the  content  use  lt P to select Agree  then press OK     Guide to Net TV screen    APP1    You Tube       Net service icons  fixed   Displays default service icons     My Apps list   Displays Net service icons you have listed  in App Gallery   Country   Selects what country you live     Terms of use   Displays a clause of Net service     J    OOO 1    App Gallery   Displays currently available Net service  icons In your country    Page guide   Displays the order of pages  The current  page will be highlighted    APP1  APP2   Displays Net service icons you    have registered in App Gallery for   APP1  APP2    e Press COLOR buttons  green  yellow   to start up APP1 APP2 accordingly     19 English    My Apps functions    Remove App     Use A Y  lt P to select the desired App  then press OPTIONS     2 Use A Y to select Remove App  then press OK   e The selected App will be removed from My Apps list     Move App     Use A Y 4 gt  to select the desired App  then press OPTIONS     2 Use A Y to select Move App  then press OK   e The selected App icon will be smaller   3 Use AY 4B to the point you want to place  then press OK     Guide to App Gallery    Cloud TV    Tag Games  G  Cloud TV    POWERD    facebook  CloudTV        Category menu    List of category menu     Icon lis
17.  another language   Hereinafter  translation  is included without limitation in the term    modification    Each  licensee is addressed as    you     Activities other than copying   distribution and modification are not covered by this License   they are outside its scope  The act of running the Program is not  restricted and the output from the Program is covered only if its  contents constitute a work based on the Program  independent  of having been made by running the Program   Whether that is  true depends on what the Program does     a You may copy and distribute verbatim copies of the Program s  source code as you receive it  in any medium  provided that  you conspicuously and appropriately publish on each copy an  appropriate copyright notice and disclaimer of warranty  keep  intact all the notices that refer to this License and to the absence  of any warranty  and give any other recipients of the Program a  copy of this License along with the Program  You may charge a fee  for the physical act of transferring a copy  and you may at your  option offer warranty protection in exchange for a fee     2  You may modify your copy or copies of the Program or any  portion of it  thus forming a work based on the Program  and  copy and distribute such modifications or work under the terms  of Section 1 above  provided that you also meet all of these  conditions     a  You must cause the modified files to carry prominent notices  stating that you changed the files and the date o
18.  are no user serviceable parts inside  Call our  toll free customer support line found on the cover of this User Manual  to locate an authorized service center     IR Signal Check    If the remote control is not working properly  you can use a Digital  camera  including a cellular phone with built in camera  to see if it Is  sending out an infrared signal        With a Digital camera    including built in cell phone cameras     Point the Digital Camera towards the remote control  infrared diode at the front of the remote control   Press any button on the remote control and loOK  through the camera display  If the infrared pulsating  light appears through the camera  the remote control  is sending out an IR signal              English    53 English    9 Specifications    Model   32PFL4907 26PFL4907 22PFL4907    Type WXGA  1366 x 768 pixels 60Hz   Viewing angles 178    V  by 178    H  150    V  by 160    H  160    V  by 170    H     Mono   Stereo Mono  Stereo  SRS TruSurround XT      Power output  RMS watts  8W x 2 2W x 2             Equalizer 5 band    Ease of use    SD  4 3 Source    Automatic   Super zoom   4 3   Movie expand 14 9   Movie expand 16 9    Wide screen   HD  16 9 Source    Automatic   4 3   Wide screen   Full  10801 p only    HDMI AV  4 3 Source    Automatic   Super zoom   4 3   Movie expand 14 9   Movie expand 16 9    Wide screen   HDMI AV  16 9 Source    Automatic   4 3   Wide screen   Full  10801 p only    PC Source   4 3  Wide screen   Unscaled    Picture fo
19.  audio 7  to output second audio program    When you set to Main in Alternate audio above  you can select Mono  or Stereo if the Analog broadcasting is sending the MTS  Multichannel  television sound      to output mono audio  Mono Stereo    to output stereo audio    This selects sound modes for more spatial or surround sound  reproduction     SRS TruSurround to set SRS TruSurround XT   to Off  XT   O to set SRS TruSurround XT   to On    This function keeps a constant loudness differential between the TV  commercials and the programs     to remove the auto volume leveling  to reduce volume differences between the  TV commercials and the programs    You can select the Audio Output from the unit s speakers or not  If your  amplifier is HDMI link function compatible and connected by an HDMI  cable to this unit  some sound operations such as volume up can be  changed by using this unit s remote control  Make sure Master EasyLink  is set to On  im p 39    Of not to output sound from the unit s  speakers  MS to output sound from the unit s speakers    to control Audio Output from your  Speakers   connected EasyLink Compliant Devices  EasyLink   with VOL     by using this unit s remote  control              TV speakers       If a channel or Input device is too loud or too soft  navigate to that  channel or Input device     Delta volume __  to seta negative delta to set a positive delta       volume level as per your volume level as per your  personal preferences personal preferences
20.  connect with an Ethernet cable  select  Wired to connect to the Internet     e If you select Wireless  use A Y to select Easy Connect and  press OK        6 Follow the on screen instructions to complete the installation     e When you select On in the selection screen of  Auto software update  A message will appear if there is the  latest software on the network server     7 Use  lt P to select Start  then press OK to begin Settings assistant   Settings assistant will allow you to customize your picture settings to your    personal preference  You will see a series of test pictures where  the right side and left side differ  Select the side that is most pleasing to    you with the Left  Right buttons              8 Press  lt  or P gt  5 times to select the side of the pictures that is the  most pleasing to you  then press OK     saa    a    wn      Nae tr ae  Which side of the picture do you prefer        Ca   paren    Continued on next page     9 Press OK to finish Settings assistant     Store your preferences     KEN       e Network updates will appear after Connection test succeeds   Use  lt P to select Yes  then press OK    e When the initial setup is completed  the lowest memorized  channel with the confirmation message of the location setting  will be displayed on the TV screen     e Ifyou are not receiving a signal from your cable service  contact the Cable provider   e If you press Y during AutoProgram  this setup of TV channels will be canceled     e The initial Aut
21.  court judgment or allegation of patent  infringement or for any other reason  not limited to patent  issues   Conditions are imposed on you  whether by court order   agreement or otherwise  that contradict the conditions of this  License  they do not excuse you from the conditions of this  License  If you cannot distribute so as to satisfy simultaneously  your obligations under this License and any other pertinent  obligations  then as a consequence you may not distribute the  Library at all  For example  if a patent license would not permit  royalty free redistribution of the Library by all those who receive  copies directly or indirectly through you  then the only way you  could satisfy both it and this License would be to refrain entirely  from distribution of the Library     If any portion of this section is held invalid or unenforceable under  any particular circumstance  the balance of the section is intended  to apply  and the section as a whole is intended to apply in other  circumstances     It is not the purpose of this section to induce you to infringe any  patents or other property right claims or to contest validity of  any such claims  this section has the sole purpose of protecting  the integrity of the free software distribution system which is  implemented by public license practices  Many people have made  generous contributions to the wide range of software distributed  through that system in reliance on consistent application of that  system  It is up to 
22.  deeper hierarchies cannot be displayed    e Unplayable files in the home server will not be displayed in the file list   e For some files  playback is not available even if displayed in the file list     e In order to play back the contents in home servers  the player and the servers must be  connected to the same access point     e Compatibility and available playback function may differ depending on the home server   e Video files with unsupported audio format will be skipped   e The quality of the playback picture or audio differs depending on your network condition      32kHz or 44 1kHz or 48kHz    32kbps   320kbps      16Mpixel             Before using DLNA    Follow the procedure below before using DLNA     1 Connect this unit to the Internet     Connecting the TV to the Internet using an Ethernet cable m    p 46  or Connecting the TV to the Internet using a wireless LAN im   p 47  e Broadband Internet connection of 8Mbps or faster is required     2 Set up the necessary network connection settings  Network im   p 40    Using DLNA    1 Start DLNA home media servers in your home network     e For details  refer to the instruction book of the DLNA certified  device     Press MENU EXIT on the remote control     Use A Y  lt P to select Browse PC   e This unit will start loading the home server list     UI N    4 After loading  home server list will appear Select a home server you  want to access  then press OK     18 Engish    Guide to DLNA Listen to music using DLNA       
23.  display and perform the  Original Code and or any Modifications provided by SGI alone  and or as part of a Larger Work  and  ii  under any Licensable  Patents  to make  have made  use  sell  offer for sale  import and   or otherwise transfer the Original Code and or any Modifications  provided by SGI  Recipient accepts the terms and conditions of  this License by undertaking any of the aforementioned actions  The  patent license shall apply to the Covered Code if  at the time any  related Modification is added  such addition of the Modification  causes such combination to be covered by the Licensed Patents   The patent license in Section 2 1 1  shall not apply to any other  combinations that include the Modification  No patent license is  provided under SGI Patents for infringements of SGI Patents by  Modifications not provided by SGI or combinations of Original  Code and Modifications not provided by SGI  2 2  Recipient  License Grant  Subject to the terms of this License and any third  party intellectual property claims  Recipient hereby grants SGI  and any other Recipients a worldwide  royalty free  non exclusive  license  under any Recipient Patents  to make  have made  use  sell   offer for sale  import and or otherwise transfer the Original Code  and or any Modifications provided by SGI     No License For Hardware Implementations  The licenses granted  in Section 2 1 and 2 2 are not applicable to implementation in    a     3 3     Hardware of the algorithms embodied in
24.  e  DOT  Press to shift the subchannel from the main  channel    PREV CH Press to return to the previously viewed channel    CH     Press to select channels    FORMAT   Selects a picture format    VOL       Press to adjust the volume    MUTE   Press to Turn the sound On and Off    BACK   Press to return to the previous menu operation    MENU  EXIT    Press to display the Home menu    NETFLIX and COLOR button  red    Starts up NETFLIX and functionally useful for Net service   AUTO MODE   Cycles through preset picture and sound settings    OPTIONS   Displays a list of menu items applicable to the highlighted object  or screen     11 English          VOL  lt   gt   Control panel Touch to adjust volume down   lt 4   up   gt   or to move left      lt 4    right   gt   when selecting menu items    2  MENU  Touch to display the Home menu    3  SOURCE  Touch to select the connected devices    4  CH A V  Touch to select channels or to move up  A    down  W   when  selecting menu items              POWER ON STANDBY ON   Touch    to Turn the unit On and go into Standby mode   23 To completely Turn Off the unit  you must unplug the AC power       cord      6  Power On indicator  VOL  gt  MENU    SOURCE W CH A o  Lights up white when the unit is Turned On and flashes while the    unit is Turning On                     7  Infrared sensor  Receives IR signals from remote control              Ethernet port  Terminals For Internet connection using an Ethernet cable with an RJ 45  connector   
25.  e Net TV  This unit lets you enjoy Internet services  Use the remote control to  browse the Net TV pages  You can play movies and much more  all  from your TV screen    e Child lock    This feature allows you to block children s access to inappropriate  programs     e Closed Caption decoder  Built in Closed Caption decoder displays text for Closed Caption  supported programs     e  MTS SAP tuner    Audio can be selected from the remote control     e Auto Standby  If there is no Input signal and no operation for 15 minutes  the unit will go  into Standby mode automatically     e Sleep timer  You can set the unit to go into Standby mode after a specific amount of  time     e Choices for on screen language  Select your on screen language  English  Spanish or French   e Stereo sound function    e PLL frequency synthesized tuning  Provides free and easy channel selection and lets you tune directly to any  channel using the number and decimal point    e    buttons on the remote  control     e Various adjustment for picture and sound  Customizes image quality suitable for your room and sets your sound  preference     e EasyLink via HDMI link    EasyLink allows your other HDMI link devices to be controlled by the  HDMI cable connected to your TV     e HDMI Input    e HDMI DVI Input  If your video device has DVI Output jack  use an HDMI DVI conversion  cable to connect the unit     e Component Video Input  e PC Input  e AV Input    e USB terminal  The picture  JPEG   music  MP3  and 
26.  for wireless networks automatically  Scan and select the SSID from the list   Wireless network setting mp p 41  Manual entry Set up the connection to the AP  e g  wireless  router  manually by entering the SSID     Wired setting    Select to use an Ethernet cable to connect to the Internet by wired  connection  Please purchase shielded Ethernet cables at your local store  and use them when you connect to network equipment     4 Use A Y to select Wired  then press OK   e Connection test will start automatically  m    p 42       Manual network settings    2 Use A Y to select Manual network settings  then press OK        Network selection Wireless  Manual network settings Auto  IP setting mode  Proxy setting    Network selection  3 Use A Y to select Network selection  then press OK   4 Use AY to select the desired setting  then press OK     Wired If you connect to an Ethernet cable  select Wired  to connect to the Internet        Wireless If you have a router with WPS function  select  Wireless to connect to the Internet     Continued on next page     Wireless network setting   This menu ts displayed only when you set Wireless in   Network selection  In order to use a wireless network  you must set up  a connection to the AP  e g  wireless router      3 Use A Y to select Wireless network setting  then press OK     Auto    Search for wireless networks automatically and select the SSID from the  list     4 Use AY to select Auto  then press OK     5 The list of wireless networks w
27.  hardware accelerated video player uses the graphics  adapter of your PC to render HD video rather than the processor   This frees up the processor for Philips Wireless MediaConnect video  encoding  The content protection on most Blu ray or DVD disc  movies might restrict watching the movie on TV when the disc is  playing on a PC  The TV shows PC media files with a small delay   Philips Wireless MediaConnect is only available for PC    PC requirements   Windows XP Windows Vista  Windows 7    Mac OS X 10 5 or above  PC only    Minimum PC requirements   e Intel  Core    2 Duo 1 8GHz   e 512MB RAM    lt  IEEE 802 11n   Recommended PC requirements   e Intel  Core    2 Duo 2 1GHz   e 11GB RAM    17 English       View photos  play music and watch videos  using DLNA    On your TV you can play video  music and photo files stored on DLNA  certified home media servers connected to your home network  In  order to use this feature  you must connect this unit to the Internet     It is recommended that files to be played back in this unit are recorded  under the following specifications      lt MP3 gt    e Sampling frequency  e Constant bit rate   lt JPEG gt    e Upper limit   lt MPEG gt    e Playable codec    MPEG  MPEGZ  e Maximum size of a video   1920x1080    e Audio type   AC3  MPEG1 audio layer 3  MP3    MPEG1 audio layer 2  LPCM      Note    e A maximum of 1 023 folders or files can be recognized      For the home server list  maximum of 16 servers can be displayed    e The 10th and
28.  is hereby granted   provided that the above copyright notice appear in all copies and that    both that copyright notice and this permission notice appear in supporting  documentation  and that the names of Stichting Mathematisch Centrum  or CWI not be used in advertising or publicity pertaining to distribution  of the software without specific  written prior permission     STICHTING  MATHEMATISCH   CENTRUM DISCLAIMS ALL  WARRANTIES WITH REGARD TO THIS SOFTWARE  INCLUDING  ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS   IN NO EVENT SHALL STICHTING MATHEMATISCH CENTRUM  BE LIABLE FOR ANY SPECIAL  INDIRECT OR CONSEQUENTIAL  DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM  LOSS OF USE  DATA OR PROFITS  WHETHER IN AN ACTION  OF CONTRACT  NEGLIGENCE OR OTHER TORTIOUS ACTION   ARISING OUT OF OR IN CONNECTION WITH THE USE OR  PERFORMANCE OF THIS SOFTWARE     OpenGL    Notice   License Applicability  Except to the extent portions of this file are made  subject to an alternative license as permitted in the SGI Free Software  License B  Version 1 0  the    License     the contents of this file are subject  only to the provisions of the License  You may not use this file except in  compliance with the License  You may obtain a copy of the License at  Silicon Graphics  Inc   attn  Legal Services  1600 Amphitheatre Parkway     Mountain View  CA 94043 1351  or at  http   oss sgi com projects FreeB    Note that  as provided in the License  the Software is distributed on  an    AS 
29.  it  By contrast  the GNU General Public License is  intended to guarantee your freedom to share and change free software  to make sure the software is free for all its users  This General Public  License applies to most of the Free Software Foundation s software  and to any other program whose authors commit to using it   Some  other Free Software Foundation software is covered by the GNU Lesser  General Public License instead   You can apply it to your programs  too     When we speak of free software  we are referring to freedom  not price   Our General Public Licenses are designed to make sure that you have the  freedom to distribute copies of free software  and charge for this service  if you wish   that you receive source code or can get it if you want it  that  you can change the software or use pieces of it in new free programs  and  that you know you can do these things     To protect your rights  we need to make restrictions that forbid anyone  to deny you these rights or to ask you to surrender the rights  These  restrictions translate to certain responsibilities for you if you distribute  copies of the software  or if you modify it  For example  if you distribute  copies of such a program  whether gratis or for a fee  you must give the  recipients all the rights that you have  You must make sure that they  too   receive or can get the source code  And you must show them these  terms so they know their rights     We protect your rights with two steps   1  copyright 
30.  lt P to select USB  then press  OK         Picture   E jpg   Mm mp3  Image1 jpg  Image2 jpg    MURIE    Video  Image3 jpg    Image4 jpg  Image5 jpg    3 Use A Y to select the Picture  Music or Video  then press OK     e The files recorded under the following specifications are  required     e Press OPTIONS to display the optional menu  then press OK to  switch between List and Thumbnails     Picture  JPEG   Upper limit   Music  MP3    Sampling frequency   32 kHz  44 1 kHz or 48 kHz    16Mpixel    Constant bit rate  Video  MPEG     video  mpeg    32 kbps   320 kbps       a E  MPEG1 audio layer3    Video codec   MPEG1  MPEG  MPEG4 SP H 264  WMV9  Audio codec MPEG2 MPEG4 ASP   MPEG4    WVC1        e Up to 2GB  FAT16  or 8GB  FAT32  capacity can be supported    e Up to 10 000 files or 1 000 folders with 19 hierarchies can be recognized   e Up to 255 English characters can be recognized    e This unit does not support MT P Media Transfer Protocol     e This unit supports FAT16 and FAT32 file systems    e Ifthe file is not supported  an error message appears    e When the USB Memory Stick is not recognized  try reconnecting it again     e We cannot be held responsible if your USB Memory Stick is not supported  nor will we  accept any liability for damage or loss of stored data     e A file name exceeding 128 characters or contains a dot character is not supported on  this TV     e Progressive JPEG files are not supported       Only an MPEG file with     mpg          mpeg        vo
31.  may  cause injury  death       English       Environmental care    The packaging of this product Is intended to be recycled    Contact your local authorities for information about how to recycle the  packaging    For product recycling information  please visit   www recycle philips com    End of life directives    E    Philips pays a lot of attention to produce environment friendly products  in green focal areas  Your new TV contains materials which can be  recycled and reused  At the end of its life  specialized companies can  dismantle the discarded TV to concentrate the reusable materials and to  minimize the amount of materials to be disposed of  Please ensure you  dispose of your old TV according to local regulations    Disposal of used batteries   The batteries supplied do not contain the heavy metals mercury and  cadmium  Nevertheless  in many areas batteries may not be disposed  of with your household waste  Please ensure you dispose of batteries  according to local regulations     3 Get started       Features    DTV TV CATV    You can use your remote control to select channels which are broadcast in  Digital format and conventional Analog format  Also  cable subscribers can  access their cable TV channels     e Information display  You can display the title  contents and other information of the current  program on the TV screen     e AutoProgram  This unit automatically scans and memorizes channels available in your area   eliminating difficult setup procedures    
32.  network connection is properly made   Visit http   filmfresh roxionow com   Film Fresh  on your PC and create an account     Check if the network connection is properly made   Pandora is available only in the United States   You must create a Pandora account and activate this unit  Activating Pandora m    p 22    v Tuner server  station or the Internet connection is busy  The bit rate of the station is high     Check if the network connection is properly made   Check the firewall setting of the modem or router  For some stations  playback is not available on this unit     The bit rate of the station Is low     The start up screen  PHILIPS logo with spinning circle  keep displaying until the unit found the PC that is running  Philips Wireless MediaConnect     Make sure if the network connection is connected properly    Check if your PC runs Philips Wireless MediaConnect    Make sure your TV and PC are connected on the same network    For smooth operation of your PC while Philips Wireless MediaConnect is running you need a mainstream dual core processor from  Intel  or AMD     Intel     Core   2 Duo or Core      3 5 7   1 8GHz or higher   AMD  Athlon    II X2  Turion M    Dual Core or Phenom    X2   2GHz or higher        e The LCD screen is manufactured to provide many years of useful life  Occasionally a few non active pixels may appear as a fixed point of blue  green or red   This is not to be considered a defect in the LCD screen     e Some functions are not available in sp
33.  of who wrote it     Thus  it is not the intent of this section to claim rights or contest  your rights to work written entirely by you  rather the intent is  to exercise the right to control the distribution of derivative or  collective works based on the Program     In addition  mere aggregation of another work not based on  the Program with the Program  or with a work based on the  Program  on a volume of a storage or distribution medium does  not bring the other work under the scope of this License     You may copy and distribute the Program  or a work based on  it  under Section 2  in object code or executable form under the  terms of Sections 1 and 2 above provided that you also do one of  the following     a  Accompany it with the complete corresponding machine   readable source code  which must be distributed under the  terms of Sections 1 and 2 above on a medium customarily used  for software interchange  or     b  Accompany it with a written offer valid for at least three  years  to give any third party  for a charge no more than your  cost of physically performing source distribution  a complete  machine readable copy of the corresponding source code  to  be distributed under the terms of Sections 1 and 2 above on a  medium customarily used for software interchange  or     c  Accompany it with the information you received as to the offer  to distribute corresponding source code   This alternative is  allowed only for noncommercial distribution and only if you  rece
34.  on the wall  allow this much space   Top  11 8 inches  30cm   Left and right side  5 9 inches  15cm     Bottom  3 9 inches  10cm     1 Notice    Trademarks are the property of Koninklijke Philips Electronics N V  or  their respective owners     P amp F USA reserves the right to change products at any time without  being obliged to adjust earlier supplies accordingly     The material in this User Manual is believed adequate for the intended  use of the system  If the product or its individual modules or procedures  are used for purposes other than those specified herein  confirmation   of their validity and surtability must be obtained  P amp F USA warrants   that the material itself does not infringe any United States patents  No  further warranty is expressed or implied     P amp F USA cannot be held responsible neither for any errors in the  content of this document nor for any problems as a result of the  content in this document  Errors reported to P amp F USA will be adapted  and published on the P amp F USA support website as soon as possible     Pixel characteristics    This LED product has a high number of color pixels  Although it has  effective pixels of 99 999  or more  black dots or bright points of light   red  green or blue  may appear constantly on the screen  This is a  structural property of the display  within common industry standards   and is not a malfunction     Warranty    No components are user serviceable  Do not open or remove covers  to the inside 
35.  products derived  from the Covered Code  without prior written permission of SGI   or  ill  any title to or ownership of the Original Code  which shall  at all times remains with SGI  All rights in the Original Code not  expressly granted under this License are reserved     Compliance with Laws  Non Infringement  There are various  worldwide laws  regulations  and executive orders applicable  to dispositions of Covered Code  including without limitation  export  re export  and import control laws  regulations  and  executive orders  of the U S  government and other countries  and  Recipient is reminded it is obliged to obey such laws  regulations   and executive orders  Recipient may not distribute Covered  Code that  1  in any way infringes  directly or contributorily  any  intellectual property rights of any kind of any other person or  entity or  il  breaches any representation or warranty  express     xi    10     11      2    13    implied or statutory  to which  under any applicable law  it might be  deemed to have been subject     Claims of Infringement  If Recipient learns of any third party claim  that any disposition of Covered Code and or functionality wholly  or partially infringes the third party s intellectual property rights   Recipient will promptly notify SGI of such claim     Versions of the License  SGI may publish revised and or new  versions of the License from time to time  each with a distinguishing  version number  Once Covered Code has been published
36.  reminder is provided to call the CATV system installer s  attention to Article 820 40 of the NEC that provides guidelines for    proper grounding and  in particular  specifies that the cable ground  shall be connected to the grounding system of the building  as close  to the point of cable entry as practical        Example of Antenna Grounding as per NEC     National  Electric Code    ANTENNA LEAD IN WIRE    ANTENNA DISCHARGE  UNIT  NEC SECTION 810 20     GROUNDING CONDUCTORS   NEC SECTION 810 21   GROUND CLAMPS                    POWER SERVICE GROUNDING  Seale E ELECTRODE SYSTEM  EQUIPMENT   NEC ART 250  PART H     P amp F USA is not liable for these types of accidents or injury noted  below     Install the Wall Mount Bracket on a sturdy vertical wall   If installed onto a ceiling or slanted wall  the TV and Wall Mount  Bracket may fall which could result in a severe injury   Do not use screws that are longer or shorter than their  specified length  If screws too long are used this may cause  mechanical or electrical damage inside the TV set  If screws too  short are used this may cause the TV set to fall   Do not fasten the screws by excessive force  This may damage  the product or cause the product to fall  leading to an injury   For safety reasons use 2 people to mount the TV onto a Wall  Mounting Bracket   Do not mount the TV onto the Wall Mounting Bracket while  your TV is plugged in or Turned On  It may result in an electrical  shock injury    When installing the unit
37.  select VUDU deactivation  then press OK   2 Use A Y to select the desired option  then press OK     Deactivate the connection to VUDU         Activate the connection to VUDU         You Tube deactivation    Displays the deactivation setting for YouTube     1 Use A Y to select YouTube deactivation  then press OK   2 Use A Y to select the desired option  then press OK     Deactivate the connection to YouTube        Activate the connection to You Tube     6 Connecting devices    No supplied cables are used with these connections     e Please purchase the necessary cables at your local store        Before you connect AC power cord     Be sure other devices are connected properly before plugging in the AC  power cord        Selecting your connection quality    HDMI   Highest quality       Supports high definition Digital signals and gives highest picture and  sound quality  Video and Audio signals are combined in one cable  You  must use HDMI for full high definition video and to enable Philips  EasyLink     Note       e Philips HDMI supports HDCP  High bandwidth Digital Contents Protection   HDCP  is a form of Digital Rights Management that protects high definition content in Blu ray  discs or DVDs    e The HDMI ARC connector on the TV features HDMI ARC functionality  This allows  output of TV Audio to an HDMI ARC compliant device        Component  Y Pb Pr    High quality       Supports high definition Analog signals but gives lower picture quality than  HDMI  Component  Y Pb Pr
38.  terms  lo do so  attach the following notices to the program  It is safest to  attach them to the start of each source file to most effectively convey the  exclusion of warranty and each file should have at least the    copyright     line and a pointer to where the full notice is found     one line to give the program s name and an idea of what it does   Copyright  C  yyyy name of author    This program is free software  you can redistribute it and or modify it  under the terms of the GNU General Public License as published by the  Free Software Foundation  either version 2 of the License  or  at your  option  any later version     This program is distributed in the hope that it will be useful  but  WITHOUT ANY WARRANTY  without even the implied warranty of  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE  See  the GNU General Public License for more details     You should have received a copy of the GNU General Public License  along with this program  if not  write to the Free Software Foundation   Inc   51 Franklin Street  Fifth Floor Boston  MA 02110 1301  USA     Also add information on how to contact you by electronic and paper  mail     If the program is interactive  make it output a short notice like this when  it starts in an interactive mode     Gnomovision version 69  Copyright  C  year name of author    Gnomovision comes with ABSOLUTELY NO WARRANTY  for details  type    show w  This is free software  and you are welcome to redistribute  it under certain condit
39.  the Original Code or  any Modifications provided by SGI      Redistributions     Retention of Notice Copy of License  The Notice set forth in  Exhibit A  below  must be conspicuously retained or included in  any and all redistributions of Covered Code  For distributions of  the Covered Code in source code form  the Notice must appear  in every file that can include a text comments field  in executable  form  the Notice and a copy of this License must appear in related  documentation or collateral where the Recipient s rights relating  to Covered Code are described  Any Additional Notice Provisions  which actually appears in the Original Code must also be retained  or included in any and all redistributions of Covered Code     Alternative License  Provided that Recipient is in compliance  with the terms of this License  Recipient may  so long as without  derogation of any of SGI s rights in and to the Original Code   distribute the source code and or executable version s  of  Covered Code under  1  this License   2  a license identical to  this License but for only such changes as are necessary in order  to clarify Recipient s role as licensor of Modifications  and or  3  a  license of Recipient s choosing  containing terms different from this  License  provided that the license terms include this Section 3 and  Sections 4  6  7  10  12  and 13  which terms may not be modified  or superseded by any other terms of such license  If Recipient  elects to use any license other tha
40.  then press OK     Oy UI  E Uy N    Read the on screen instructions and confirm that you want to  continue with the installation     Software update is in progress  Please wait   Do not remove the USB storage device or turn the TV off while  upgrade is in progress     Update your TV with new software  kx         7 When the software upgrade is completed  press    to set the unit  to go into Standby mode  then remove the USB Memory Stick     8 Unplug the AC power cord for a few seconds from AC outlet and  plug it again   9 Press    again to Turn the unit On     e The TV starts up with the new software   For further assistance  please contact Call Center     Network update  You can update the software by connecting the unit to the Internet     1 Use A Y to select Software update  then press OK   Use A Y to select Network  then press OK     2  3 Use 4   to select Yes  then press OK   e This unit will then start checking for the latest firmware version   4 Confirmation message will appear   Use     to select Yes  then press OK   e The unit will start downloading the latest firmware version   e The unit will start updating the firmware version   e It may take a while to complete the updating   When the software update is complete  press    to make sure the  unit goes to Standby mode     6 Unplug the AC power cord for a few seconds from AC outlet and  plug it again     44 English    7 Press  4 again to Turn the unit On     e The TV starts up with the new software   For further assis
41.  under  a particular version of the License  Recipient may  for the duration  of the license  continue to use it under the terms of that version   or choose to use such Covered Code under the terms of any  subsequent version published by SGI  Subject to the provisions of  Sections 3 and 4 of this License  only SGI may modify the terms  applicable to Covered Code created under this License     DISCLAIMER OF WARRANTY  COVERED CODE  IS  PROVIDED    AS IS  ALL EXPRESS AND IMPLIED WARRANTIES  AND CONDITIONS ARE  DISCLAIMED  INCLUDING   WITHOUT LIMITATION  ANY IMPLIED WARRANTIES AND  CONDITIONS OF MERCHANTABILITY  SATISFACTORY  QUALITY  FITNESS FORA PARTICULAR PURPOSE AND NON   INFRINGEMENT  SGI ASSUMES NO RISK AS TO THE QUALITY  AND PERFORMANCE OF THE SOFTWARE  SHOULD  THE SOFTWARE PROVE DEFECTIVE IN ANY RESPECT  SGI  ASSUMES NO COST OR LIABILITY FOR SERVICING  REPAIR  OR CORRECTION  THIS DISCLAIMER OF WARRANTY IS  AN ESSENTIAL PART OF THIS LICENSE  NO USE OF ANY  COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT  SUBJECT TO THIS DISCLAIMER     LIMITATION OF LIABILITY  UNDER NO CIRCUMSTANCES  NOR LEGAL THEORY  WHETHER TORT  INCLUDING   WITHOUT    LIMITATION  NEGLIGENCE OR  STRICT  LIABILITY   CONTRACT  OR OTHERWISE  SHALL SGI OR  ANY SGI LICENSOR BE LIABLE FOR ANY DIRECT  INDIRECT   SPECIAL  INCIDENTAL  OR CONSEQUENTIAL DAMAGES  OF ANY CHARACTER INCLUDING  WITHOUT LIMITATION   DAMAGES FOR LOSS OF GOODWILL  WORK STOPPAGE   LOSS OF DATA  COMPUTER FAILURE OR MALFUNCTION   OR ANY AND ALL OT
42.  using  the NUMBER buttons at the rightmost entry field  numbers will be stored  and go back to the previous menu           42    Proxy configuration    3 Use A Y to select Proxy configuration  then press OK     4 Use AY to selecta setting  then press OK     Proxy setting Do not use      Proxy configuration       e Do not use is selected for default settings    e  f you need to change the proxy setting as instructed by your  Internet service provider to set the designated proxy address  and port  select Use           Do not use   Not use the proxy server   Proxy setting          Use Uses the proxy server        Selects the number or word by using       Proxy address A V  lt P then press OK        Use A Y or the NUMBER buttons to input       Proxy port numbers              e The range of input numbers is between O and 255    e If you enter a number larger than 255  the number will automatically be 255    e The manually entered number will be saved even if you change the setting to Auto    e If you want to enter 1 or 2 digit number in one cell  press OK to move on to the next  cell    e Ifthe entered IP address or the default gateway or primary DNS number is same as  the default setting  IP address setting will be set to Auto   The manually entered number  will be saved     e When IP address setting is set to Manual  the setting of DNS setting will automatically  be Manual and when IP address setting is set to Auto  you can set either Auto or  Manual for DNS setting            
43.  voltage of  this unit  AC 120V      e Connecting the AC power cord to a power supply outside of this range may result in          fire or electrical shocks        Note       e Each time you plug in the AC power cord  no operations will be performed for a few  seconds  This is not a malfunction           English    These operations are accessible by remote control   Some may also be accessible by control panel on the main unit        Initial setup    This section will guide you through the unit s initial setting which  includes selecting a language for your on screen menu  country  location  and AutoProgram  which automatically scans and memorizes viewable  channels  You can also set the network connection in this setting   Before you begin     Make sure the unit is connected to antenna or cable     1 After making all the necessary connections  press    to Turn On the  unit     e It may take a few moments to Turn On the unit for the first time     e Initial setup menu appears automatically after the unit is Turned  On   2 Use A Y to select the on screen language  country  location on the  right side of the TV screen  then press OK   e You must set Home in location setting  Otherwise  Picture and    Sound settings you adjusted will not be memorized after the unit  goes into Standby mode     3 Use A Y to select the signal type     e If the TV is connect to a cable box or satellite set top box  select  the 2nd one and skip to step 5        To set up a TV signal from a cable TV  
44. 0 degrees  Note  Rotate        7  Rotates an image clockwise 180 degrees  e The resume information will be kept even when the unit is Turned Off   e If you play another file while the previously viewed file is being resumed  the resume  Rotates an image clockwise 2 0 degrees  information of the previously viewed file will be deleted   Displays an image at Its original size   Zoom      Magnifies a current image as twice   Magnifies a current image as fourfold     e Press OK or  gt H to pause  press OK or  gt H again to resume   Switches to the next image in 5 seconds  e Press PP to fast forward search   Slide time       stopped  Press OK to play from the beginning of the file at                                            1 You can set Slide time and Transitions when images are in Slide show    2You can set Rotate and Zoom when Slide show is in pause mode        Net TV    Net TV offers Internet services for your TV  Use the remote control to  browse the Net TV pages  You can play movies and much more  all from  your 1V screen         Because Net TV is an online system  it can be modified over time to  better serve Its purpose        Some Net TV services can be added  changed or stopped after  some time        You cannot download and save files or install plug ins     Before Logging in to Net TV  Follow the procedure below before logging in to Net TV   1 Connect this unit to the Internet     2 Set up the necessary network connection settings  Network im p 40    Logging in to Net
45. 1 Press A Y to select a file or a folder    2 Press OK or PII to play the selected files     e Press OK or  gt H to pause  press OK or  gt H again to resume    4  e Press BP to skip up the next file   e Press  lt q to skip down the previous file   e Press Mi to stop playback   Title     R e Press OPTIONS to display the optional menu  then use A Y to    Album  6  select the desired item   Duration  00 05 28    Year          Oj Server     Q     _     1  EA  Server2 ll  O Server3    m     dd   EE   Key       Off Sets repeat playback to off     Repeat On Sets repeat playback for all MP3 files in the  current folder     Off Sets shuffle playback to off                       2 PE Shuffle On Sets shuffle playback for all MP3 files in the   2  Folder media icon current folder    G  Group  folder   file list Of Mee will not be output from the unit s   4  Image On The sound will be output from the unit s   5  Current file info TV speakers speakers     You can control audio output from your  connected EasyLink Compliant Devices with  VOL     by using this unit s remote control     Speakers  EasyLink                View your pictures using DLNA    Note       1 Press A Y to select a file or a folder     2 Press OK or  gt I to start a Slide show of the files e Master EasyLink must be activated in the Preferences menu to make the  TV speakers menu available when you select On or Speakers EasyLink              e Press OK or  gt H to pause the Slide show   The If icon appears   e Press  lt  l
46. CE PERSONNEL  maintenance  servicing  instructions in the literature accompanying       The caution marking is located on the rear or bottom of the cabinet  the apparatus     WARNING  To reduce the risk of fire or electric shock  do not expose this apparatus to rain or moisture  Apparatus shall  not be exposed to dripping or splashing and no objects filled with liquids  such as vases  shall be placed on the  apparatus     CAUTION  To prevent electric shock  match wide blade of plug to wide slot  fully insert     ATTENTION  Pour   viter les choc   lectriques introduire la lame la plus large de la fiche dans la borne correspondante de la  prise et pousser jusqu   au fond        PHILIPS _ Visit our World Wide Web Site at www philips com support    CHILD SAFETY  Congratulations on your purchase     lt Makes A Difference How and Where As you enjoy your new product   Y Your Flat Panel Displ  gt  i p  R Nein aate please keep these safety tips in mind   THE ISSUE    e The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases   However  flat panel displays are not always supported on the proper stands or installed according to the manufacturer s  recommendations        e Flat panel displays that are inappropriately situated on dressers  bookcases  shelves  desks  speakers   chests or carts may fall over and cause injury     THIS MANUFACTURER CARES     e The consumer electronics industry is committed to making home entertainment e
47. EEE 802 11 b g n      Frequency spectrum   2 4GHz      Security protocol  WVVEP  VVPA  WPA2       41 English    Manually enter your SSID    Set up the connection to the AP  e g  wireless router  manually by  entering the SSID     4       Use A Y to select Manually enter your SSID  then press OK   e AP  e g  wireless router  SSID entry screen will appear     Enter the SSID using A Y  lt P  then press OK     Use A Y to select the authentication setting of the selected  wireless network     e For a wireless network with authentication setting  select the    authentication setting  according to the security type of the    wireless network     Select security type for   Router 1     W PA PSK    WPA2 PSK                   None Set the authentication setting to None    WEP Set the authentication setting to WEP   WPA PSK Set the authentication setting to WPA PSK   WPA2 PSK Set the authentication setting to WPA2 PSK              For a wireless network without authentication setting  select  None    If you select WEP  WPA PSK or WPA2 PSK  WEP  WPA Key  entry screen will appear    Enter the WEP  WPA key of the selected wireless network  using A Y  lt P  then press OK    Confirmation message will appear Select Yes to complete the  settings     Continued on next page     IP configuration   In following cases  select IP configuration to set each setting as  necessary        When connection test failed with the setting of Connection test         When instructed by your Internet service prov
48. HER COMMERCIAL DAMAGES  OR LOSSES  EVEN IF SUCH PARTY SHALL HAVE BEEN  INFORMED OF THE POSSIBILITY OF SUCH DAMAGES  THIS  LIMITATION OF LIABILITY SHALL NOT APPLY TO LIABILITY  FOR DEATH OR PERSONAL INJURY RESULTING FROM SGI s  NEGLIGENCE TO THE EXTENT APPLICABLE LAW PROHIBITS  SUCH LIMITATION  SOME JURISDICTIONS DO NOT ALLOW  THE EXCLUSION OR LIMITATION OF INCIDENTAL OR  CONSEQUENTIAL DAMAGES  SO THAT EXCLUSION AND  LIMITATION MAY NOT APPLY TO RECIPIENT     Indemnity  Recipient shall be solely responsible for damages arising   directly or indirectly  out of its utilization of rights under this License   Recipientwilldefend indemnifyandholdharmlessSiliconGraphics  nc   fromandagainstanyloss llabilitydamages costsorexpenses  including  thepaymentofreasonableattorneysfees  arisingoutofRecipient   suse   modification reproductionanddistributionofthe CoveredCodeorout  of any representation or warranty made by Recipient     U S  Government End Users  The Covered Code Is a    commercial  item    consisting of    commercial computer software    as such  terms are defined in title 48 of the Code of Federal Regulations  and all U S  Government End Users acquire only the rights set  forth in this License and are subject to the terms of this License     Miscellaneous  This License represents the complete agreement  concerning the its subject matter  If any provision of this License  is held to be unenforceable  such provision shall be reformed so  as to achieve as nearly as possible the 
49. Home screen    Twitter Home Screen consolidates browsing of tweets and some  functional menus for Twitter    To call up the screen  press NET TV on the remote control and then  use A Y  lt P to select Twitter     Single View    a    Favorite    Mentions    E    Phily and Maggy  Right as rain  That was a sense of humor           4  Menu   List of functional menus    Q  Viewing channel   Displays currently watching channel   G  Timeline   Displays currently tweeting on Twitter    4  Operation guide   Displays COLOR buttons     red green yellow blue  guide   Full View    Single view switches to Full view when you select timeline then press  OK     Home    Perseverance prevails   A I ll be there  textbook in hand     Favorite    Tinner Loberto      Greetings    am looking for a small tiny stove in which to heat once a day   Mentions    Propatanga less than 1 minute  Would you like the straightforward reasons that people believe in it     Peter   s rock star  It   s not so rich a country as your country        Viewing tweets on the TV  After logging in to Twitter  your TV will download the latest 20 tweets  to display     1 Press NETTY on the remote control and then use A Y    gt  to  select Twitter   2 Use A Y 4   to select the desired user name  then press OK     e If you have not stored the password  will appear beside the  user name     3 When the unit is logged in successfully  Iwitter Home menu will  appear at the left and the timeline will appear at the bottom of the  TV sc
50. IAL  EXEMPLARY  OR  CONSEQUENTIAL DAMAGES  INCLUDING  BUT NOT LIMITED TO   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES  LOSS  OF  USE  DATA  OR PROFITS  OR BUSINESS INTERRUPTION  HOWEVER  CAUSED AND ON ANY THEORY OF LIABILITY  WHETHER IN  CONTRACT  STRICT LIABILITY  ORTORT  INCLUDING NEGLIGENCE  OR OTHERWISE  ARISING IN ANY WAY OUT OF THE USE OF  THIS SOFTWARE  EVEN IF ADVISED OF THE POSSIBILITY OF SUCH  DAMAGE     zlib libpng License    zlib h    interface of the  zlib  general purpose compression library version  1 2 3  July 18th  2005    Copyright  C  1995 2005 Jean loup Gailly and Mark Adler    This software is provided  as is   without any express or implied warranty   In no event will the authors be held liable for any damages arising from  the use of this software     Permission is granted to anyone to use this software for any purpose   including commercial applications  and to alter it and redistribute it freely   subject to the following restrictions     i  The origin of this software must not be misrepresented  you  must not claim that you wrote the original software  If you use  this software in a product  an acknowledgment in the product  documentation would be appreciated but is not required     L Altered source versions must be plainly marked as such  and must  not be misrepresented as being the original software    2 This notice may not be removed or altered from any source  distribution    Jean loup Gailly Mark Adler   jloup gzip org madler alumni caltech edu
51. IS    basis  with ALL EXPRESS AND IMPLIED WARRANTIES  AND CONDITIONS   DISCLAIMED  INCLUDING  WITHOUT  LIMITATION  ANY IMPLIED WARRANTIES AND CONDITIONS  OF MERCHANTABILITY  SATISFACTORY QUALITY  FITNESS FOR A  PARTICULAR PURPOSE  AND NON INFRINGEMENT     Original Code  The Original Code is  OpenGL Sample Implementation   Version 1 2 1  released January 26  2000  developed by Silicon Graphics   Inc  The Original Code is Copyright  c  1991 2000 Silicon Graphics  Inc     Copyright in any portions created by third parties is as indicated  elsewhere herein  All Rights Reserved     Additional Notice Provisions  The application programming interfaces  established by SGI in conjunction with the Original Code are The  OpenGL R  Graphics System  A Specification  Version 1 2 1   released  April 1  1999  The OpenGL R  Graphics System Utility Library  Version  1 3   released November 4  1998  and OpenGL R  Graphics with the  X Window System R   Version 1 3   released October 19  1998  This  software was created using the OpenGL R  version 1 2 1 Sample  Implementation published by SGI  but has not been independently verified  as being compliant with the OpenGL R  version 1 2 1 Specification  SGI  FREE SOFTWARE LICENSE B  Version 1 1  02 22 2000      q1  Definitions     1 1     Additional Notice Provisions    means such additional provisions  as appear in the Notice in Original Code under the heading     Additional Notice Provisions        1 2     Covered Code    means the Original Code or
52. Language English    Fran  ais  Espa  ol    Installation    2 Use A Y to select English  Espanol or Frangais  then press OK     e If you need the English menu instead of the Spanish or French menu s  press  MENU EXIT   Use  lt P A Y to select Configuraci  n or Configuration  then press OK   Use A Y to select Instalaci  n or Installation  then press OK   Use A Y to select Idioma or Langue  then press OK   Use A Y to select English  then press OK   Press MENU EXIT to exit the Home menu                    Channel installation    Be sure the RF cable is correctly connected to this unit and you are  registered with your cable TV provider when you install cable channels     Autoprogram    If you switch wires  e g  between antenna and CATV  or if you move  the unit to a different area after the initial setting  or if you restore the  DTV channels you deleted  it is recommended to use AutoProgram to  perform a new channel search    You need to select the signal type in Installation mode before you  perform AutoProgram      1 Use A Y to select Channels  then press OK     2 Use A Y to select Autoprogram  then press OK     e If you run Autoprogram when you have locked channels  a  message appears asking to enter your PIN code  Enter your  PIN code in order to complete the installation  You need to set  the channel lock again after the installation     3 Press OK to select Start now     e When the scanning and memorizing are completed  the lowest  memorized channel will be displayed     4
53. NEGLIGENCE  OR OTHERWISE  ARISING IN ANY WAY OUT OF THE USE OF  THIS SOFTWARE  EVEN IF ADVISED OF THE POSSIBILITY OF SUCH  DAMAGE     The licence and distribution terms for any publically available version or  derivative of this code cannot be changed  e  this code cannot simply be  copied and put under another distribution licence     including the GNU Public Licence       MINIX 3    Copyright  c  1987 1997  2006  Vrije Universiteit  Amsterdam   The Netherlands All rights reserved     Redistribution and use of the MINIX 3 operating system in source and  binary forms  with or without modification  are permitted provided that  the following conditions are met     Redistributions of source code must retain the above copyright notice   this list of conditions and the following disclaimer    Redistributions in binary form must reproduce the above copyright notice   this list of conditions and the following disclaimer in the documentation  and or other materials provided with the distribution     Neither the name of the Vrije Universitert nor the names of the software  authors or contributors may be used to endorse or promote products  derived from this software without specific prior written permission     Any deviations from these conditions require written permission from  the copyright holder in advance    unicode    Unicode Copyright   a Copyright c 1991 2011 Unicode  Inc  All rights reserved     2  Certain documents and files on this website contain a legend  indicating that
54. NEGLIGENCE OR OTHERWISE   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE  EVEN  IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE     This product includes cryptographic software written by Eric Young   eayOcryptsoft com      This product includes software written by Tim Hudson  tjh cryptsoft   com      Original SSLeay License    Copyright  C  1995 1998 Eric Young  eay cryptsoft com   All rights reserved     This package is an SSL implementation written by Eric Young  eay   cryptsoft com      The implementation was written so as to conform with Netscapes SSL     This library is free for commercial and non commercial use as long as  the following conditions are aheared to  The following conditions apply  to all code found in this distribution  be it the RC4  RSA  Ihash  DES  etc    code  not just the SSL code The SSL documentation included with this  distribution is covered by the same copyright terms except that the  holder is Tim Hudson  t h cryptsoft com      Copyright remains Eric Young s  and as such any Copyright notices in the  code are not to be removed  If this package is used in a product  Eric  Young should be given attribution as the author of the parts of the library  used  This can be in the form of a textual message at program startup or  in documentation  online or textual  provided with the package     Redistribution and use in source and binary forms  with or without  modification  are permitted provided that the following conditions are  met    1  Redistribut
55. NSED FREE OF CHARGE   THERE IS NO WARRANTY FOR THE PROGRAM  TO THE  EXTENT PERMITTED BY APPLICABLE LAW  EXCEPT WHEN  OTHERWISE STATED IN WRITING THE COPYRIGHT  HOLDERSAND OR OTHER PARTIES PROVIDE THE PROGRAM     AS IS  WITHOUT WARRANTY OF ANY KIND  EITHER  EXPRESSED OR IMPLIED  INCLUDING  BUT NOT LIMITED TO   THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  FITNESS FOR A PARTICULAR PURPOSE  THE ENTIRE RISK AS  TO THE QUALITY AND PERFORMANCE OF THE PROGRAM  IS WITH YOU  SHOULD THE PROGRAM PROVE DEFECTIVE   YOU ASSUME THE COST OF ALL NECESSARY SERVICING   REPAIR OR CORRECTION     IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW  OR AGREED TO IN WRITING WILL ANY COPYRIGHT  HOLDER  OR ANY OTHER PARTY WHO MAY MODIFY AND   OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE   BE LIABLE TO YOU FOR DAMAGES  INCLUDING ANY  GENERAL  SPECIAL  INCIDENTAL OR CONSEQUENTIAL  DAMAGES ARISING OUT OF THE USE OR INABILITY TO  USE THE PROGRAM  INCLUDING BUT NOT LIMITED TO  LOSS OF DATA OR DATA BEING RENDERED INACCURATE    OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR  A FAILURE OF THE PROGRAM TO OPERATE WITH ANY  OTHER PROGRAMS   EVEN IF SUCH HOLDER OR OTHER  PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH  DAMAGES     END OF TERMS AND CONDITIONS  How to Apply These Terms to Your New Programs    If you develop a new program  and you want it to be of the greatest  possible use to the public  the best way to achieve this is to make it  free software which everyone can redistribute and change under these 
56. OL     to recover the original sound        15 English       Switching channels    4 lt  voL P gt  MENU              FORMAT    aa  4 cui 5 Jkl 6 mno  ED    To select Channels by using CH A W or CH        e Touch CH A  up   Y  down  on the front panel or press CH      on the remote control     7 pars 8 tw 9 wxyz    PREV  CH 0 o    To select Channels by using the NUMBER buttons       Digital TV operation    e For Digital channels  press a number followed by a dot        and the  corresponding sub channel number         When selecting Digital channel 11 1  Be sure to press   before entering the subchannel number            When selecting cable or Analog channel 11    00 00    Press PREV CH to return to the previously viewed channel     e To select the non memorized channels  use the NUMBER buttons     e Channel not available or No Signal will appear on the TV screen after the subchannel  broadcast is over     e Audio only message will appear on the TV screen  when you receive only sound signal                    Watching channels from an external device    Switching Each Input Mode can easily switch with the remote control  between TV  DTV or Analog TV  and external devices when they are  connected to the unit     1 TumOna set top box or the connected device     e The picture from your set top box or the connected device  might appear automatically on the TV screen     If the picture does not appear    NETELIX          Press SOURCE repeatedly to select the set top box or the  co
57. PRODUCT  EXCEPT TO THE EXTENT PROHIBITED BY  APPLICABLE LAW  ANY IMPLIED WARRANTY OF MER   CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE  ON THIS PRODUCT IS LIMITED IN DURATION TO THE  DURATION OF THIS WARRANTY     Some states do not allow the exclusions or limitation of inciden   tal or consequential damages  or allow limitations on how long an  implied warranty lasts  so the above limitations or exclusions may  not apply to you     This warranty gives you specific legal rights  You may have other rights which vary from state province to state province     P amp F USA  Inc  PO Box 2248  Alpharetta  GA 30023 2248    061708    License    This product uses some open source software     GPL software linux  gcc  sysfsutils  Realtek WIFI driver  binutils  busybox   dhcpcd    LGPL software  directfb  glibc  Qt   MIT  Expat  c ares  libxml2  lua  lua xmlreader  lua slncrypto  giflib  MIT X  CURL   gSOAP Public License  gsOAP   BSD  WPA Supplicant   zlib libpng License  zlib  libpng   XML RPC FOR C C   license  xmlrpc   Free Type  LibBJPEG  OpenSSL  MINIX 3  unicode  ADPCM  OpenGL    GPL    GNU GENERAL PUBLIC LICENSE   Version 2  June 1991   Copyright  C  1989  1991 Free Software Foundation  Inc   51 Franklin Street  Fifth Floor  Boston  MA 02110 1301  USA    Everyone is permitted to copy and distribute verbatim copies of this  license document  but changing it is not allowed     Preamble    The licenses for most software are designed to take away your freedom  to share and change
58. R  PROFITS  OR BUSINESS INTERRUPTION  HOWEVER CAUSED AND  ON ANY THEORY OF LIABILITY  WHETHER IN CONTRACT  STRICT  LIABILITY  OR TORT  INCLUDING NEGLIGENCE OR OTHERWISE   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE  EVEN  IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE     Free Type    Portions of this software are copyright  c  2001  2002  2003  2004  2006  The Free lype Project  www freetype org   All rights reserved     LibJPEG    This software is based in part on the work of the Independent JPEG  Group     OpenSSL    LICENSE ISSUES    The OpenSSL toolkit stays under a dual license  i e  both the conditions of  the OpenSSL License and the original SSLeay license apply to the toolkit   See below for the actual license texts  Actually both licenses are BSD style  Open Source licenses  In case of any license issues related to OpenSSL  please contact openssl core openssl org     OpenSSL License  Copyright  c  1998 2011 The OpenSSL Project All rights reserved     Redistribution and use in source and binary forms  with or without  modification  are permitted provided that the following conditions are  met     ila Redistributions of source code must retain the above copyright  notice  this list of conditions and the following disclaimer     Ze Redistributions in binary form must reproduce the above  copyright notice  this list of conditions and the following disclaimer  in the documentation and or other materials provided with the  distribution      gt   All advertising mater
59. Register your product and get support at    www philips com support    32PFL4907  26PFL4907  22PFL4907    PHILIPS             _  Te  E       EN User Manual    ES Manual del Usuario    FR Manuel d Utilisation       EN  For further assistance  call the customer support service in your country     e To obtain assistance  contact Philips Customer Care Center   In the U S A   Canada  Puerto Rico  or the U S Virgin Islands 1 866 309 0843  M  xico D F  and Area Metropolitana  58 87 97 36  Interior de la Republica  01 800 839 19 89    ES  Para obtener m  s informaci  n  llame al servicio de soporte al cliente de su  pa  s   Para obtener asistencia  comun  quese con Centro de atenci  n al cliente de Philips   En los Estados Unidos  en Canad    Puerto Rico o en las Islas V  rgenes de los Estados Unidos   1 866 309 0843  M  xico D F  y Area Metropolitana  58 87 97 36  Interior de la Republica  01 800 839 19 89    FR  Pour obtenir de laide suppl  mentaire  communiquez avec le centre de service  a la clientele de votre pays   e Pour obtenir de l aide  communiquez avec le centre de service a la client  le Philips au   Dans le Etats Unis  au Canada  a Puerto Rico ou aux lles Vierges am  ricaines  1 866 309 0843  M  xico D F et Area Metropolitana  58 87 97 36  Interior de la Republica  01 800 839 19 89    PHILIPS       Contents    1 Notice    2 Important  Positioning the TV  Regulatory notices  Environmental care    3 Get started  Features  Supplied accessories  Symbols used in this User Man
60. SSID   WEP WPA or Proxy address        Clear All clear a A   Cancel                Enter the key of the selected wireless network using A Y  lt q gt    then press OK   Clear   Clear the entered number or word   All clear   Clear all the entered numbers or words   a A     Switch between abc  ABC and      Cancel   Shows the cancellation display   OK   Set the entered number or word         1 Use A Y to select Network  then press OK     English  Autoprogram  Location    Installation Network Network settings assi    Start now                Network settings assistant    Before you proceed to Connection test or other settings in Network  section  set this selection to suit your preference     2 Use A Y to select Network settings assistant  then press OK        Network settings assistant Start now  Network selection  Start now  Network Information    Start now       3 Press OK to select Start now        40 English    Wireless setting    Select to use a wireless LAN to connect to the Internet by wireless  connection     4 Use A Y to select Wireless  then press OK           This TV can be connected to your home Wireless  network   Select your connection type        Cancel    Lo       5 Use A Y to select the desired setting  then press OK     Select this setting if your router has a WPS  button  Start scanning for wireless networks on   Easy connect the TV after pressing the WPS button on your  router  If connection test fails  refer to the router s  manual for more details     Search
61. TATIONS    This Limited Warranty applies only to new company manufac   tured products that can be identified by the trademark  trade  name  or logo affixed to it  This Limited Warranty does not apply  to any hardware product or any software  even if packaged or  sold with the product  as manufacturers  suppliers  or publishers  may provide a separate warranty for their own products pack   aged with the bundled product     The company is not liable for any damage to or loss of any pro   grams  data  or other information stored on any media contained  within the product  or other additional product or part not cov   ered by this warranty  Recovery or reinstallation of programs   data or other information is not covered under this Limited  Warranty     This warranty does not apply  a  to damage caused by accident   abuse  misuse  neglect  misapplication  or non supplied product    b  to damage caused by service performed by anyone other than  company approved Authorized Service Location   c  to a product    or a part that has been modified without written company per   mission  or  d  if any serial number has been removed or defaced   or  e  product  accessories or consumables sold    AS IS    without  warranty of any kind by including refurbished product sold    AS  IS    by some retailers     This Limited Warranty does not cover    e Shipping charges to return defective product    e Labor charges for installation or setup of the product  adjust   ment of customer controls on t
62. UBSTITUTE GOODS  OR SERVICES  LOSS OF USE  DATA  OR PROFITS  OR BUSINESS  INTERRUPTION  HOWEVER CAUSED AND ON ANY THEORY OF  LIABILITY  WHETHER IN CONTRACT  STRICT LIABILITY  OR TORT   INCLUDING NEGLIGENCE OR OTHERWISE  ARISING IN ANY  WAY OUT OF THE USE OF THIS SOFTWARE  EVEN IF ADVISED OF  THE POSSIBILITY OF SUCH DAMAGE     VII    BSD    Copyright  c  2003 2010  Jouni Malinen  lt j w1 fi gt  and contributors  All Rights Reserved     Redistribution and use in source and binary forms  with or without  modification  are permitted provided that the following conditions are  met     1 Redistributions of source code must retain the above copyright  notice  this list of conditions and the following disclaimer     ws Redistributions in binary form must reproduce the above  copyright notice  this list of conditions and the following disclaimer  in the documentation and or other materials provided with the  distribution     3 Neither the name s  of the above listed copyright holder s  nor  the names of its contributors may be used to endorse or promote  products derived from this software without specific prior written  permission     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS  AND CONTRIBUTORS    AS IS  AND ANY EXPRESS OR IMPLIED  WARRANTIES  INCLUDING  BUT NOT LIMITED TO  THE IMPLIED  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A  PARTICULAR PURPOSE ARE DISCLAIMED  IN NO EVENT SHALL  THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR  ANY DIRECT  INDIRECT  INCIDENTAL  SPEC
63. UTE so that the volume bar and current volume level will appear on the TV screen   Make sure that the volume is NOT set to 0 or aX  If so  use VOL     to adjust to the desired volume    Make sure that the headphone is NOT connected to the Headphone Audio Output jack    Make sure that the TV speakers is NOT set to Off     View other TV channels  The problem might be limited to the broadcasting station or weak signal strength   Adjust Color in Picture settings  mm p 30    Make sure that the Analog Audio signals from the HDMI DVI device are connected to the Analog Audio  L R  Input jacks     When using Component Analog Video  Composite Analog Video or PC VGA Video make sure that the Analog Audio  L R   connectors are mounted into the Audio  L R  Input jacks     You must set Home in Location  im   p 38  Otherwise  the settings you adjusted will not be memorized after the unit goes into Standby mode     Electrical interference from nearby appliances may affect picture quality when viewing an off the air low power NTSC analog  broadcast signal     Adjust Contrast and Brightness in Picture settings  m    p 30   View other TV channels  The problem might be limited to the broadcasting station or weak signal strength    For the best picture quality  watch High Definition wide screen programs    If the HD content is not available  watch Standard Definition programs instead    View other TV channels  The problem might be limited to the broadcasting station or weak signal strength    Chec
64. ablished after Turning On the  unit  before trying to access network features such as Net TV    Netflix is available only in the United States and Canada    Check if the network connection is properly made    Visit http   www netflix com HowltWorks on your PC and become a Netflix member     Visit www netflix com on your PC     The picture quality does not change during playback  It differs depending on the speed of Internet connection at the time of loading     VUDU is available only in the United States    Check if the network connection is properly made    You need to activate the VUDU account  For detailed information  please visit the service providers website at  http   www vudu com product_overview html   Log into your account at http   my vudu com and check your payment information     Check the speed of your Internet connection  You need speeds of at least 8 Mbps to this player for high quality uninterrupted  playback     Contact your Internet service provider to troubleshoot your Internet connection for speed and line quality  Consistent line quality  and speed are very important for Internet video playback     Check the content of your Internet service contract to see if your Internet Service Provider prevents multiple terminals connecting  at the same time     Check the setting on your home media server   Refer to the user manual of the home media server   Check the network connection and settings     Film Fresh is available only in the United States   Check if the
65. al distribution limitation  excluding those countries  so that distribution is permitted only in  or among countries not thus excluded  In such case  this License  incorporates the limitation as if written in the body of this License     The Free Software Foundation may publish revised and or new  versions of the General Public License from time to time  Such  new versions will be similar in spirit to the present version  but  may differ in detail to address new problems or concerns     Each version is given a distinguishing version number  If the  Program specifies a version number of this License which applies  to it and    any later version     you have the option of following the  terms and conditions either of that version or of any later version  published by the Free Software Foundation  If the Program does  not specify a version number of this License  you may choose any  version ever published by the Free Software Foundation     If you wish to incorporate parts of the Program into other free  programs whose distribution conditions are different  write to the  author to ask for permission  For software which is copyrighted  by the Free Software Foundation  write to the Free Software  Foundation  we sometimes make exceptions for this  Our decision  will be guided by the two goals of preserving the free status of all  derivatives of our free software and of promoting the sharing and  reuse of software generally     NO WARRANTY    Ti     Ne    BECAUSE THE PROGRAM IS LICE
66. an additional  Digital Audio cable  Be sure that the device is HDMI CEC and ARC  compliant  and that the TV is connected to the device using an HDMI  cable attached to both HDMI ARC connectors     Note          e Philips does not guarantee 100  interoperability with all HDMI CEC devices   e The EasyLink compliant device must be Switched On and selected as the source           EasyLink    This function allows you to operate the linked functions between our  brand devices with a EasyLink feature and this unit connecting through  an HDMI cable  You must connect this unit to our brand EasyLink  devices and be sure its EasyLink setting Is also set to On     1 Use A Y to select Preferences  then press OK     2 Use A Y to select EasyLink  then press OK     3 Use A Y 4 gt  to select the item you want to adjust  then press  OK     Master EasyLink  Auto TV on  RC key forwarding De Ea    HDMI ARC  ii    DEV Select       Set the Master EasyLink to On or Off  The following additional settings  will be grayed out when you set to Off     Off Disables all EasyLink        Master EasyLink Selects if you have connected an  external device that is compatible with  the EasyLink function     This unit will Turn On when the Power On signal is sent from your  connected EasyLink device     This unit stays in Standby mode even if  you Turn On your connected EasyLink  device     This unit Turns On automatically when  you Turn On your connected EasyLink  device          EM    You can operate some functi
67. b        avi or     mp4   extension is supported   An extension     mov    is not supported              2    Picture  JPEG     1 Use A Y to select a file or a folder    Image4 pg  Image5 pg  Image6 pg  Image 7  pg    Image8 pg    Image4 jpg  11 11 2011 11 11 AM  800x600 pixels    2 Press OK or  gt H to start a Slide show of the files     e Press OKor  gt I to pause the Slide show   The I icon appears    e Press  lt  lt  or PP to move between images    e Press BACK or W to stop the Slide show     e Press OPTIONS to display the optional menu  then use A Y to  select the desired item     Transitions     A next image goes to the out from center     Selects the picture mode according to your preference   Auto picture  Vivid  Sports  Standard  Movie  Game  Internet video and   Power saver    po Displays an image at its original direction    MES Rotates an image clockwise by 90 degrees   Rotate      Rotates an image clockwise 180 degrees    Rotates an image clockwise 2 0 degrees    Displays an image at its original size   Zoom    2x   4x    a Magnifies a current image by 2 times   NEO Magnifies a current image by 4 times      1 You can set Slide time and Transitions when images are in Slide show    2You can set Rotate and Zoom when Slide show is in Pause mode        English       Music  MP3     1 Use A Y to select a file or a folder        Track4 mp3    Track5 mp3 X J    Track6 mp3    Track  mp3    Title    Artist    Album    Duration  00 05 28  Year     Track8 mp3    2 Press OK or
68. b  then press OK     3 Use A Y 4B to select the station you want to remove from  Favorites  then press COLOR button  yellow    e Confirmation message will appear   4 Use  lt P to select Yes  then press OK     e The selected station is removed from Favorites     Internet radio playback    After you set up the network connection  follow the procedure below  to listen to Internet radio     Guide to the playback screen  e g   Location    i FM 76 2 FM  Jazz jAzz jaZz jazZ    Bl Schonan Beach FM 78 9 O     Location   Japan    Language   Japanese     eo Favorite i dr         4  Current hierarchy  total number of items    2  Current station information   Information will be changed when INFO is pressed    3  COLOR buttons  red green yellow blue  guide   4  Station list   5  Playback status       1    Station icon    Press NET TV on the remote control and then use A Y  lt P to  select v Tuner Radio     e Category list will appear     2 Inthe category list  use A Y to select the desired category  then  press OK   e Station folder list of selected category will appear    e For Location and Genre  use A Y to select the desired location  or genre after selecting the category  then press OK        List of stations which are recently played    Recently Played       Favorites List of your favorite radio stations    List of stations which are added on v Tuner  website  This category will appear only  after you add stations on v luner website       My Added Stations       Location List of stat
69. block construction  E  lt    FA  If you are unsure  contact a professional installer  IES a  Consumer Electronics Association  e A minimum of two people are required for installation  Flat panel displays can be heavy     www CE org  safety             4 English    Important Safety Instructions    Read these instructions    Keep these instructions    Heed all warnings    Follow all instructions    Do not use this apparatus near water   Clean only with dry cloth     eee SY YS    Do not block any ventilation openings  Install in accordance with the  manufacturer s instructions     8  Do not install near any heat sources such as radiators  heat registers   stoves  or other apparatus  including amplifiers  that produce heat     9  Do not defeat the safety purpose of the polarized or grounding   type plug  A polarized plug has two blades with one wider than the  other  A grounding type plug has two blades and a third grounding  prong  The wide blade or the third prong are provided for your  safety  If the provided plug does not fit into your outlet  consult an  electrician for replacement of the obsolete outlet     10  Protect the power cord from being walked on or pinched  particularly at plugs  convenience receptacles  and the point where  they exit from the apparatus     11  Only use attachments   accessories specified by the manufacturer  12  Use only with the cart  stand  tripod  bracket  or    table specified by the manufacturer  or sold with the  apparatus  When a cart Is us
70. brary  independent of the use of the Library  in a tool for writing it   Whether that is true depends on what the  Library does and what the program that uses the Library does     You may copy and distribute verbatim copies of the Library s  complete source code as you receive it  in any medium  provided  that you conspicuously and appropriately publish on each copy  an appropriate copyright notice and disclaimer of warranty  keep  intact all the notices that refer to this License and to the absence  of any warranty  and distribute a copy of this License along with  the Library     You may charge a fee for the physical act of transferring a copy   and you may at your option offer warranty protection in exchange  for a fee     You may modify your copy or copies of the Library or any portion  of it  thus forming a work based on the Library  and copy and  distribute such modifications or work under the terms of Section  1 above  provided that you also meet all of these conditions     a  The modified work must itself be a software library     b  You must cause the files modified to carry prominent notices  stating that you changed the files and the date of any change     c  You must cause the whole of the work to be licensed at no  charge to all third parties under the terms of this License     d  If a facility in the modified Library refers to a function or a table  of data to be supplied by an application program that uses  the facility  other than as an argument passed when th
71. ces  enlarges  A   the picture to best fit the screen   ae DTV and HDMI connected devices display the picture at  its original size  The subtitles may remain visible   Displays a 4 3 picture at a 16 9 size  the picture is stretched  Super zoom   horizontally and vertically and its left and right edges are  enlarged  This crops out the top and bottom of the picture     4 3 Displays a 4 3 picture at its original size     Sidebars appear on both edges of the screen     Displays a 4 3 picture at a 14 9 size  the picture is stretched  Movie expand   horizontally and vertically    This crops out the top and bottom of the picture  Sidebars   appear on both edges of the screen                              Movie expand 14 9    d Displays a 4 3 picture at a 16 9 size  the picture is stretched  horizontally and vertically   This crops out the top and bottom of the picture     l Displays a picture that is stretched out of proportion to fill    Movie expan  16 9       26 English    For PC Input signal          4 3 Wide screen Unscaled       e This unit can also be connected to your PC that has a DVI terminal  Use an HDMI DVI  conversion cable for this Video connection and it requires Stereo mini 3 5mm plug Audio  cable for Analog Audio signal as well     e Refer to 16 9 video signal on this page if PC has HDMI Output   Displays a proportionately stretched picture   4 3    Sidebars appear on both edges of the screen   E Displays a picture that is stretched out of proportion to fill  Displa
72. connection offers standard picture quality for  video devices connected to the unit    If you connect to the unit s Composite Video  Y VIDEO  Input jack   connect Audio cables to the Audio  L R  Input jacks  When the Audio is  monaural  then only connect to the Audio L Input jack                 DVD player       i     IN Audio  L R    Video cables             e With this unit  Yellow cable must be connected to Y  Green  of Component Video Input  Jacks    e Whenever you connect to the Composite Video Input jack  Y VIDEO   you must  disconnect the Component Video Input jacks  Pb and Pr   If you leave those jacks  connected  it may cause of unstable picture       Only the left loudspeaker reproduces sound for mono equipment  Use a mono to  stereo adapter  not supplied  for sound reproduction via all internal loudspeakers              Connecting the TV to the Internet using an Ethernet cable    Internet       i  an          Network provisioning    Ethernet cable equipment       e Please purchase shielded Ethernet cables at your local store and use them when you  connect to network equipment    e After connecting an Ethernet cable  set up necessary network settings  Network e p 40   e Do not insert any cable other than an Ethernet cable to the Ethernet port to avoid  damaging the unit    e If your telecommunications equipment  modem  etc   does not have broadband router  functions  connect a broadband router    e If your telecommunications equipment  modem  etc   has broadband rou
73. ct No    am new to Pandora   then press OK     Note the activation code and website address displayed on the TV  screen     On your PC  visit the website address noted at step 4   Follow directions on the website to create your account     On this unit  select Continue and press OK to complete activation     Adding Pandora User Accounts    You can add multiple Pandora user accounts on this unit     UN  UN        Follow steps 1 to 2 in Activating Pandora  m    p 22   Use A Y to select Yes    have a Pandora account  then press OK   Enter your e mail address  then press OK while OK is selected   Enter a password  then press OK while OK is selected     Use A    to select Sign In  then press OK     e Your account is added to the user list and player screen appears  on the TV screen     Note       e Pandora is available only in the United States   e You can add up to 5 accounts  After creating 5 accounts  Create new account will not    be displayed           22 Engish    Creating a New Station    By entering your favorite artists or tracks  Pandora selects music and  creates a new station for you on the basis of the entered information     1 Onthe player screen  press COLOR button  yellow  to call up the  Tool Menu     2 Use A Y to select Create a new station  then press OK     3 Enter a name of your favorite artist or tracks  then press OK while  OK is selected     e Search result will appear on the right side of the TV screen   e If the selection screen of result type appears  us
74. d 2 above   and  if the work  is an executable linked with the Library  with the complete  machine readable    work that uses the Library     as object code  and or source code  so that the user can modify the Library  and then relink to produce a modified executable containing  the modified Library   It is understood that the user who  changes the contents of definitions files in the Library will not  necessarily be able to recompile the application to use the  modified definitions      he     b  Use a suitable shared library mechanism for linking with the  Library  A suitable mechanism is one that  1  uses at run time  a copy of the library already present on the user s computer  system  rather than copying library functions into the executable   and  2  will operate properly with a modified version of the  library  if the user installs one  as long as the modified version is  interface compatible with the version that the work was made  with     c  Accompany the work with a written offer valid for at least  three years  to give the same user the materials specified in  Subsection 6a  above  for a charge no more than the cost of  performing this distribution     d  If distribution of the work is made by offering access to copy  from a designated place  offer equivalent access to copy the  above specified materials from the same place     e  Verify that the user has already received a copy of these  materials or that you have already sent this user a copy     For an executab
75. d Dealer  The original  sales receipt showing the product name and the purchase date  from an authorized retailer is considered such proof     WHAT IS COVERED    This warranty covers new products if a defect in material or  workmanship occurs and a valid claim is received within the  Warranty Period  At its option  the company will either  1   repair the product at no charge  using new or refurbished  replacement parts  or  2  exchange the product with a product  that is new or which has been manufactured from new  or ser   viceable used parts and is at least functionally equivalent or most  comparable to the original product in current inventory  or  3   refund the original purchase price of the product    Replacement products or parts provided under this warranty are  covered against defects in materials and workmanship from the  date of the replacement or repair for ninety  90  days or for the  remaining portion of the original product   s warranty  whichever  provides longer coverage for you  When a product or part is  exchanged  any replacement item becomes your property and the  replaced item becomes company property  When a refund is  given  your product becomes company property    Note  Any product sold and identified as refurbished or  renewed carries a ninety  90  day limited warranty     Replacement product can only be sent if all warranty  requirements are met  Failure to follow all requirements  can result in delay     WHAT IS NOT COVERED   EXCLUSIONS AND LIMI   
76. e  if a patent license would not permit  royalty free redistribution of the Program by all those who receive  copies directly or indirectly through you  then the only way you    10     could satisfy both it and this License would be to refrain entirely  from distribution of the Program     If any portion of this section Is held invalid or unenforceable under  any particular circumstance  the balance of the section is intended  to apply and the section as a whole is intended to apply in other  circumstances     It is not the purpose of this section to induce you to infringe any  patents or other property right claims or to contest validity of  any such claims  this section has the sole purpose of protecting  the integrity of the free software distribution system  which is  implemented by public license practices  Many people have made  generous contributions to the wide range of software distributed  through that system in reliance on consistent application of that  system  It is up to the author donor to decide if he or she is willing  to distribute software through any other system and a licensee  cannot impose that choice     This section is intended to make thoroughly clear what Is believed  to be a consequence of the rest of this License     If the distribution and or use of the Program is restricted in  certain countries either by patents or by copyrighted interfaces   the original copyright holder who places the Program under this  License may add an explicit geographic
77. e A Y to select  the desired type  then press OK   4 Use A Y to select the desired station  then press OK to start the  playback     O gt    Resumes the playback  pause the playback     Stops the playback and the station list will appear   Skips to the next track           e On the Tool Menu  you can delete or rename the currently selected station        Guide to the Player Screen    On the player screen  you can set various options to the currently  playing track     Why this track  Tool Menu    Station List        4  Artist name     Album name    G    Give thumbs up to the currently playing track     Pandora will play tracks similar to the track     Displays artist name     Displays album name       Give thumbs down to the currently playing  E track  Pandora will skip and will not play the  track       Bookmarks the currently playing track   You can view your bookmarked tracks list by  K accessing Pandora website and log into your  account                 Tells Pandora that you do not like the currently  iLL playing track  Pandora will not play the track for  about a month     Displays COLOR buttons     7  Operation guide   red green yellow blue  guide        Using Twitter    You can view your Twitter feeds and more using the Twitter application  on this unit       For more details about Twitter  please visit www twitter com    Logging in to Twitter    After you set up the network connection  you must log in with your  Twitter account   Make sure the unit is not in network 
78. e Audio Output jack   Headphone 3 5mm stereo jack for personal listening                 Connecting the antenna or the cable    Be sure your antenna or other device is connected properly before  plugging in the AC power cord     If you connect to an antenna through RF cable    Any DTV programs that are broadcasted in your area can be received  for free through an antenna connection     cable       RF cable       If you connect a set top box through RF cable    If the TV is connected to a cable box or satellite set top box via a  coaxial connection  set the TV to channel 3 4 or the channel specified  by the service provider                                         RF cable    set top box       If you connect a set top box through HDMI    If the TV is connected to a cable box or satellite set top box via HDMI   make sure you select the correct Source by using SOURCE                          RF cable  TO OUT NE  i  0E an    HDMI cable       set top box    If you connect a set top box through ComponentVideo Input    If the TV is connected to a cable box or satellite set top box via  Component Video Input  make sure you select the correct Component  Video Source by using SOURCE        Audio  LR  cables 2                               OUT set top box    Component  Y Pb Pr  Video cables             12    Connecting a set top box  Blu ray   DVD recorder via  composite connectors and Analog Audio    Do not place your recorder too close to the screen because some  recorders can be susce
79. e Check if the correct Input mode is selected by pressing SOURCE  Watching channels from an external device mb p 16  from the connected external    EDO Check the antenna  cable or other Input connection to the unit   evices     When using the Component Video Connection check that the Green  Y   Blue  Pb Cb  and Red  Pr Cr  connectors are connected  to their corresponding colored jacks on the unit     When   enter a channel number  Many Digital channels have alternate channel numbers  The unit changes the numbers automatically to the ones signifying the  it changes automatically  broadcasting station channel number  These basic numbers used for previous Analog broadcasts   e g   Input ch  30 automatically  changes to ch  6 1     Why are captions not displayed Captions that are delayed a few seconds behind the actual dialog are common for live broadcasts  Most captioning production  entirely  Or  captions are companies can display a dialog to maximum of 220 words per minute  If a dialog exceeds that rate  selective editing is used to  delayed behind the dialog  insure that the captions remain up to date with the current TV screen dialog     How can   set the clock   e There is no clock function on this unit       cannot change the Child lock    Although the default PIN code  0000  is supplied with the unit  the PIN code will be required once you set a PIN code in Child  setting because my PIN code no and ratings lock  mm   p 34 When you forget your PIN code  enter 0711 in Chang
80. e GNU Lesser General Public License for more details     You should have received a copy of the GNU Lesser General Public  License along with this library  if not  write to the Free Software  Foundation  Inc   51 Franklin Street  Fifth Floor Boston  MA 02110 1301  USA    Also add information on how to contact you by electronic and paper  mail     You should also get your employer  if you work as a programmer  or your  school  if any  to sign a    copyright disclaimer    for the library  if necessary   Here is a sample  alter the names     Yoyodyne  Inc   hereby disclaims all copyright interest in the library    Frob    a library for tweaking knobs  written by James Random Hacker      lt signature of ly Coon gt   1 April 1990  Ty Coon  President of Vice  That s all there is to rt     If you are interested in obtaining GPL source code used in this product   please contact Open Source Team  P amp F USA  Inc PO Box 2248   Alpharetta  GA 30023 2248     vi    MIT    Expat    Copyright  c  1998  1999  2000 Thai Open Source Software Center Ltd  and Clark Cooper    Copyright  c  2001  2002  2003  2004  2005  2006 Expat maintainers     C ares    Copyright 1998  2009 by the Massachusetts Institute of Technology   Copyright  C  2007 2009 by Daniel Stenberg    Permission to use  copy  modify  and distribute this software and its  documentation for any purpose and without fee is hereby granted   provided that the above copyright notice appear in all copies and that  both that copyright not
81. e Library into other free  programs whose distribution conditions are incompatible with  these  write to the author to ask for permission  For software  which is copyrighted by the Free Software Foundation  write to  the Free Software Foundation  we sometimes make exceptions  for this  Our decision will be guided by the two goals of preserving  the free status of all derivatives of our free software and of  promoting the sharing and reuse of software generally     NO WARRANTY    15  BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE   THERE IS NO WARRANTY FOR THE LIBRARY  TO THE  EXTENT PERMITTED BY APPLICABLE LAW  EXCEPT WHEN  OTHERWISE STATED IN WRITING THE COPYRIGHT  HOLDERS AND OR OTHER PARTIES PROVIDE THE LIBRARY       AS IS  WITHOUT WARRANTY OF ANY KIND  EITHER  EXPRESSED OR IMPLIED  INCLUDING  BUT NOT LIMITED TO   THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  FITNESS FOR A PARTICULAR PURPOSE  THE ENTIRE RISK AS  TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS  WITH YOU  SHOULD THE LIBRARY PROVE DEFECTIVE  YOU  ASSUME THE COST OF ALL NECESSARY SERVICING  REPAIR  OR CORRECTION     16  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW  OR AGREED TO IN WRITING WILL ANY COPYRIGHT  HOLDER  OR ANY OTHER PARTY WHO MAY MODIFY AND   OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE   BE LIABLE TO YOU FOR DAMAGES  INCLUDING ANY  GENERAL  SPECIAL  INCIDENTAL OR CONSEQUENTIAL  DAMAGES ARISING OUT OF THE USE OR INABILITY TO  USE THE LIBRARY  INCLUDING BUT NOT LIMITED TO  LOSS OF DATA OR DATA
82. e PIN to reset the PIN code  m    p 36  longer works        Troubleshooting    If the unit does not perform properly when operated as instructed in this User Manual   check the following chart and all connections once before calling for service     Symptom Remedy    No power e Make sure the AC power cord Is plugged in     e Make sure that the AC outlet supplies the proper voltage  plug another electrical appliance into the AC outlet to ensure that the AC  outlet operates normally     e Ifa power failure occurs  unplug the AC power cord for 1 minute to allow the unit to reset itself     Control buttons do not work  e Press only one button at a time  Do NOT press more than one button at the same time   e Ensure that no buttons on the remote control are depressed and move freely     Continued on next page     50 English    Symptom Remedy    Power is ON but no screen  image     No picture or sound    No color    No sound  distorted sound or  incorrect Audio Sound is heard  when using the HDMI DVI  connections     Adjusted Picture or Sound  settings are not effective every  time the unit is Turned On     Sound OK  picture poor    Picture OK  sound poor    You see a distorted picture or  hear an unusual sound     Ghosts  lines or streaks in picture    You see noise or trash on the  screen     Different color marks on the TV  screen    You switch to a different Input  and the volume changes     You switch to a different Input  and the screen size changes     The display image does n
83. e Video  Component Video or HDMI with 4801 Input  press FORMAT repeatedly to  switch various screen modes    Interference from buildings or weather conditions may cause captioning to be incomplete if watching Analog TV  NTSC  signals   Broadcasting station may shorten the program to Insert advertisements    The Closed Caption decoder cannot read the information of the shortened program     The text mode is Selected  For caption  select CC 1  CC 2  CC 3 or CC 4     Check if the Ethernet cable connection is properly made  Turn On the modem or broadband router   Check the network settings    Check if the broadband router and or modem is correctly connected    The wireless network connection quality varies depending on the distance or obstacles  e g  wall  basement  2nd floor  between the TV    Wireless LAN Adapter and the wireless router  access point   from other wireless networks  and brand and type of the wireless router   access point   When using the Wireless LAN of the TV  it is suggested to place the wireless router as close as possible to the Television     Continued on next page     51 English    Symptom Remedy    Wireless LAN connection fails or  wireless connection is poor     Cannot use the wireless  connection     Cannot use Netflix feature     Cannot add movies or TV  episodes to the Instant Queue     Even though the speed of the  Internet connection improves  during playback  the picture  quality of Netflix streaming  movie does not improve     Cannot use VUDU fea
84. e facility  is Invoked  then you must make a good faith effort to ensure  that  in the event an application does not supply such function  or table  the facility still operates  and performs whatever part  of its purpose remains meaningful   For example  a function  in a library to compute square roots has a purpose that Is  entirely well defined independent of the application  Therefore   Subsection 2d requires that any application supplied function  or table used by this function must be optional  ifthe application  does not supply it  the square root function must still compute  square roots      These requirements apply to the modified work as a whole  If  identifiable sections of that work are not derived from the Library   and can be reasonably considered independent and separate  works in themselves  then this License  and its terms  do not apply  to those sections when you distribute them as separate works   But when you distribute the same sections as part of a whole  which is a work based on the Library  the distribution of the whole  must be on the terms of this License  whose permissions for other  licensees extend to the entire whole  and thus to each and every  part regardless of who wrote it     Thus  it is not the intent of this section to claim rights or contest  your rights to work written entirely by you  rather  the intent is  to exercise the right to control the distribution of derivative or  collective works based on the Library     In addition  mere agg
85. e with ElA861    For HDMI DVI connection   e The unit accepts 480i  480p  720p  10801 and 1080p video signals    e HDMI DVI connection requires separate Audio connections as well and the Audio  signals are output as Analog  L R  Audio    e DVI does not display 480i image which is not in compliance with EIA CEA 861 8618B              English    HDMI ARC connection    HDMI ARC allows you to use EasyLink to output TV Audio directly to  a connected Audio device  without the need for an additional Digital  Audio cable     TION  HDMI IN only our  S Digital home theater    HDMI cable HDMI  nt amplifier       Note          e The HDMI 1 connector is HDMI Audio Return Channel  ARC  compliant  Use it to  output Digital Audio to an HDMI home theater system    e Be sure that the device is HDMI CEC and ARC compliant and that the TV is connected  to the device using an HDMI cable attached to HDMI ARC connectors        Component Analog Video Connection    Component Analog Video connection offers better picture quality for  video devices connected to the unit    If you connect to the unit s Component Video  Y Pb Pr  Input jacks   connect Analog Audio cables to the Analog Audio  L R  Input jacks     OUT           Audio  L R  cables    co e    ES OUT                Blu ray disc DVD  recorder    Component  Y Pb Pr  Video cables    Note       e The unit accepts 4801 480p 720p and 10801 p of video signals for this connection        46    Composite Analog Video Connection    Composite Analog Video 
86. ecific modes  but this is not a malfunction  Read the description in this User Manual for more details on correct operations           8 Information       Glossary    DTV  ATSC     Acronym that stands for Advanced Television Systems Committee and the name  of the Digital broadcasting standards     Aspect ratio    The width of a TV screen relative to its height  Conventional TVs are 4 3  in other  words  the TV screen is almost square   widescreen models are 16 9  the TV  screen is almost twice as wide as its height      CEC  Consumer Electronics Control     This allows you to operate the linked functions between our brand devices with  CEC feature and this unit  We do not guarantee 100  interoperability with other  brands of CEC compliant devices     Component Video    This is a video signal format that conveys each of 3 principal colors of light   red  blue and green  through different signal lines  This allows the viewers to  experience picture colors as original as it is  There are several signal formats   including Y Pb Pr and Y Cb Cr     Dolby Digital    The system developed by Dolby Laboratories to compress Digital sound  It offers  stereo sound  2ch  or multi channel Audio     E sticker    E sticker is showing set features  technical information  etc on this TV set  that is displayed on the TV screen mainly used by TV retailers  Previously the  information was on a printed sticker that was put on the display     HDMI  High Definition Multimedia Interface     Interface 
87. ect  channels that are not in a list                   Sleep timer    Sleep timer can set the unit to go into Standby mode after an  incremental period of time     AUTO OPTIONS  MODE FAV SLEEP       Press SLEEP repeatedly to change the amount of time    Increases the time by 5 minutes up to 180 minutes     e Each press of     will decrease the time by 5 minutes    e Press INFO once to call up the display for checking the  remaining time    e To cancel sleep timer press SLEEP or       repeatedly until     0    is displayed        Changing picture format    Display modes can be selected when your TV receives a 16 9 or 4 3  video signal   Three types of display modes can be selected for a PC Input signal     Press FORMAT repeatedly to switch the TV aspect ratio        For 16 9 video signal    Automatic 5   4 3           Full  1080i p only  Wide screen    Other than DTV and HDMI connected devices  enlarges  tama  a the picture to best fit the screen   cid DTV and HDMI connected devices display the picture at  its original size  The subtitles may remain visible   Displays a 16 9 picture at a 4 3 size  the picture is  3 shortened horizontally   Sidebars appear on both edges of the screen   Widescreen Displays a 16 9 picture that is stretched horizontally and  vertically   i Displays a 16 9 picture at its original size   1080i p only    P2097 P      For 4 3 video signal    Automatic 4h Super zoom        i mn     Wide screen Movie expand 16 9    Other than DTV and HDMI connected devi
88. ed  color    ra   o    Red  n to decrease to increase  8 contrast with red   contrast with red    to decrease to increase  contrast with contrast with  green green    Bite sain to decrease to increase  5 contrast with blue   contrast with blue    to decrease to increase    Green gain  Color  alignment       e Mode selection is available only if      the external Input modes are selected HDMI 1  HDMI 2 or HDMI 3         the connected HDMI device is outputting a video signal           Red offset    red    to decrease    green    Blue offset  blue       Noise to select the desired setting   reduction  Off  Minimum  Medium  Maximum and Auto     brightness with    Green offset   brightness with    to decrease  brightness with       brightness with  red    to Increase  brightness with  green    to increase  brightness with  blue    then press OK       Black to select the desired setting  then press OK  stretch  Off  Minimum  Medium and Maximum     Dynamic to select the desired setting  then press OK  contrast  Off  Minimum  Medium and Maximum   Gamma         to adjust the gamma encoding of images    Cursor  lt     MPEG      to select the desired setting   artifact   NS     Off  Minimum  Medium and    then press OK  Maximum        reduction    Color    enhancement       to set color enhancement to Off    to make colors more vivid and bright    Sound       Before you begin     You must set Home in Location  m    p 38    Otherwise  personalized picture and sound settings will not be  
89. ed  use caution when FS  moving the cart apparatus combination to avoid injury  E    from tip over    Wall Mount Bracket Kit  Brand  SANUS    Model   Screw dimension    22PFL4907 SAN10b M4 x 0 472     12mm   For 26 inch TVs  screws w washers are required   sold separately     M4 x 0 472     12mm   26PFL4907 SAN 1 3b a  Washer 0 039     T1mm    A Do NOT use screws  packed with Wall Mount Bracket Kit       For 32 inch TVs  you need to purchase screws  separately with dimensions described below     32PFL4907 VM200s M4 x 0 472   12mm           e The recommended Wall Mount Bracket Kit  sold separately   allows the mounting of the TV on the wall    e For detailed information on installing the wall mount  refer to  the Wall Mount Instruction Book     e   P amp F USA is not responsible for any damage to the product or  injury to yourself or others if you elect to install the TV Wall  Mount Bracket or mount the TV onto the Bracket on your own     e The Wall Mount Bracket must be installed by experts           13  Unplug this apparatus during lightning storms or when unused for  long periods of time     14  Refer all servicing to qualified service personnel  Servicing is  required when the apparatus has been damaged in any way  such  as power supply cord or plug is damaged  liquid has been spilled  or objects have fallen into the apparatus  the apparatus has been  exposed to rain or moisture  does not operate normally  or has  been dropped     Note to the CATV system installer     This
90. erbatim copies of this  license document  but changing it is not allowed      This is the first released version of the Lesser GPL  It also counts as  the successor of the GNU Library Public License  version 2  hence the  version number 2 1      Preamble    The licenses for most software are designed to take away your freedom  to share and change it  By contrast  the GNU General Public Licenses are  intended to guarantee your freedom to share and change free software  to make sure the software is free for all its users     This license  the Lesser General Public License  applies to some specially  designated software packages  typically libraries  of the Free Software  Foundation and other authors who decide to use It  You can use it too   but we suggest you first think carefully about whether this license or  the ordinary General Public License is the better strategy to use in any  particular case  based on the explanations below     When we speak of free software  we are referring to freedom of use   not price  Our General Public Licenses are designed to make sure that  you have the freedom to distribute copies of free software  and charge  for this service if you wish   that you receive source code or can get it if  you want it  that you can change the software and use pieces of it in new  free programs  and that you are informed that you can do these things     To protect your rights  we need to make restrictions that forbid  distributors to deny you these rights or to as
91. erwise  personalized picture and sound settings will not be  memorized after the unit goes into Standby mode     1 Press MENU EXIT and use A V   4   to select Setup  then press  OK     2 Use A Y to select Picture  then press OK     Picture Settings assistant Start now    Auto picture Personal    A  Contrast AAAA  Brightness AAAA  Soor AAAA    Tint MAA EN    Sharpness EII       3 Use A Y  lt P to select the item you want to adjust  then press OK     e The following picture settings can be configured  Depending on  the format of the picture Source  some picture settings are not  avallable     Settings assistant   to guide you through the best picture setting    to select the desired setting  then press OK    Personal  Vivid  Sports  Standard  Movie  Game  Auto picture Internet video and Power saver    When you adjust the following settings  Personal will   be set automatically     Backlight to reduce power to set the backlight  consumption brighter    Brightness to decrease brightness to increase brightness    to decrease color    Color to increase color intensity  intensity          30 English    to select the desired setting  then press OK   Color alignment  Noise reduction  Black stretch      Advanced picture   Dynamic contrast  Gamma  MPEG artifact reduction   Color enhancement  Custom color management  and Film mode     Picture format Changing picture format im   p 26    to Turn Off image enhancement  PC features which makes the TV to  act purely as a monitor    Mode selec
92. es    Insert the USB Memory Stick into the USB terminal shown below   USB im   p 27    Note          e The unit recognizes only a USB Memory Stick     e Do not use a USB hub or an extension cable to connect an external hard disk drive to  the unit   Not supported      e A USB Memory Stick is always inserted to this unit directly    e A USB Memory Stick is not supplied with this unit    e We do not guarantee that all USB Memory Sticks can be supported by this unit    e Be sure to keep a backup copy of the original files on your device before you play them  back on this untt VWVe have no responsibilities for damage or loss of your stored data    e To protect your USB Memory Stick files from being erased place the write protect  sliding tab in the protect position    e When you are ready to remove a USB Memory Stick  set the unit to go into Standby  mode to avoid any damage to your data and the unit    e A USB Memory Stick that requires its own driver or the device with a special system  such as fingerprint recognition are not supported    e This unit is not allowed to use the USB Memory Stick which requires an external  power supply  500mA or more         48    English    49 English    7 Useful tips       FAQ    Question Answer    My remote control does not Check the antenna or cable connection to the main unit   work   What should   do     Check the batteries of the remote control    Check if there is an obstacle between the infrared sensor window and the remote control    Tes
93. f any change     b  You must cause any work that you distribute or publish  that in  whole or in part contains or is derived from the Program or  any part thereof  to be licensed as a whole at no charge to all  third parties under the terms of this License     c  Ifthe modified program normally reads commands interactively  when run  you must cause it  when started running for such  interactive use in the most ordinary way  to print or display an  announcement including an appropriate copyright notice and a  notice that there is no warranty  or else  saying that you provide  a warranty  and that users may redistribute the program under  these conditions  and telling the user how to view a copy of this  License   Exception  if the Program itself is interactive but does  not normally print such an announcement  your work based on  the Program is not required to print an announcement      These requirements apply to the modified work as a whole   If identifiable sections of that work are not derived from the  Program  and can be reasonably considered independent and  separate works in themselves  then this License  and its terms  do  not apply to those sections when you distribute them as separate  works  But when you distribute the same sections as part of a  whole which is a work based on the Program  the distribution of  the whole must be on the terms of this License whose permissions  for other licensees extend to the entire whole  and thus to each  and every part regardless
94. for this Video Digital connection and it  requires Stereo mini 3 5mm plug Audio cable for Analog Audio signal as  well           IN OUT __       A qn     A dl Bi HDMI DVI mG PC           conversion cable  Y IN OUT    Stereo mini 3 5 mm plug Audio cable       VGA connection   This unit is equipped with a PC Input jack  If you connect this unit to  your PC  you can use this unit as a PC monitor    Use aVGA cable for this Video connection and it requires a Stereo mini  3 5mm plug Audio cable for Analog Audio signal as well         VGA cable          PE    OUT                Stereo mini 3 5 mm plug Audio cable    English    The following video signals can be displayed     768  768  768       Note          e Please purchase the VGA cable or HDMI DVI conversion cable that has a ferrite core    e The following operations may reduce noise       Attach a ferrite core to the AC power cord of your PC       Unplug the AC power cord and use the built in battery of your PC    e Use an HDMI cable with the HDMI logo  a certified HDMI cable   High Speed HDMI  cable is recommended for the better compatibility    e The unit accepts 4801  480p  720p  10801 and 1080p video signals    e HDMI DVI connection requires separate Audio connections as well and the Audio  signals are output as Analog  L R  Audio    e DVI does not display 480i image which is not in compliance with EIA CEA 861 861B        USB Memory Stick    This unit offers easy playback of picture  JPEG   music  MP3  and video   MPEG  fil
95. glish       Note Child and ratings lock       e Digital caption service that you can switch differs depending on the broadcast  description    e Closed Captioning service may not be controlled by this units menu options if you are  watching television through an external cable or satellite set top box  In which case  you will need to use the menu options on the external set top box to control Closed    Captioning  1 Use A Y to select Child lock  then press OK     You can prevent your children from watching certain programs or  certain channels by locking the TV controls and by using ratings     e The captions do not always use correct spelling and grammar    e Not all TV programs and product commercials include Closed Caption information   Refer to your area TV program listings for the TV channels and times of Closed Caption       Closed captions    shows  The captioned programs are usually noted in the TV listings with service marks                              such as CC    e Not all captioning services are used by a TV channel during the transmission of a Features Child lock Channel lock  Closed Caption program  ae  gt  2    e Closed Caption will NOT be displayed when you are using an HDMI connection    Start now    e To show the Closed Caption on your TV screen  broadcast signal must contain the  Closed Caption data     e Not all TV programs and commercials have the Closed Caption or all types of the  Closed Caption     e Captions and texts may not exactly match the TV vo
96. he accompanying uncombined form of the  same work     You may not copy  modify  sublicense  link with  or distribute  the Library except as expressly provided under this License   Any attempt otherwise to copy  modify  sublicense  link with  or  distribute the Library is void  and will automatically terminate your  rights under this License  However  parties who have received  copies  or rights  from you under this License will not have  their licenses terminated so long as such parties remain in full  compliance     You are not required to accept this License  since you have not  signed it  However  nothing else grants you permission to modify  or distribute the Library or tts derivative works  These actions are  prohibited by law if you do not accept this License  Therefore  by  modifying or distributing the Library  or any work based on the  Library   you indicate your acceptance of this License to do so  and  all its terms and conditions for copying  distributing or modifying  the Library or works based on it     Each time you redistribute the Library  or any work based on the  Library   the recipient automatically receives a license from the  original licensor to copy  distribute  link with or modify the Library    subject to these terms and conditions  You may not impose  any further restrictions on the recipients  exercise of the rights  granted herein  You are not responsible for enforcing compliance  by third parties with this License     11  lf as a consequence of a
97. he product  and installation or  repair of antenna signal source systems outside of the product    e Product repair and or part replacement because of improper  installation or maintenance  connections to improper voltage  supply  power line surge  lightning damage  retained images or  screen markings resulting from viewing fixed stationary con   tent for extended periods  product cosmetic appearance items  due to normal wear and tear  unauthorized repair or other  cause not within the control of the company    e Damage or claims for products not being available for use  or  for lost data or lost software    e Damage from mishandled shipments or transit accidents when  returning product    e A product that requires modification or adaptation to enable  it to operate in any country other than the country for which  it was designed  manufactured  approved and or authorized  or  repair of products damaged by these modifications    e A product used for commercial or institutional purposes   including but not limited to rental purposes     e Product lost in shipment and no signature verification receipt  can be provided    e Failure to operate per Owner   s Manual     TO OBTAIN ASSISTANCE     Contact the Customer Care Center at   1 866 309 0843    REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS  WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON   SUMER  WITH THE ISSUING COMPANY NOT LIABLE FOR  ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR  BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON  THIS 
98. her set the sub ratings to block specific  elements of programming  lo set the sub ratings  follow the step below        Use A Y  lt P to select the desired rating  then press OK repeatedly to  switch between  Xx  and L               IX  Fantasy Violence  TV ratings lock       US TV ratings Sub Rating  TV Y7 Fantasy Violence    Dialog  Language  Sex  Violence    Language  Sex  Violence         Note    e Blocked sub rating will appear beside the main rating category in TV ratings lock menu   e You cannot block a sub rating if the main rating is set to     e Changing the category to J or    automatically changes all its sub ratings to the same     XJ or D               Continued on next page     English    Canada English or Canada French ratings    3 Use A Y to select Canada English ratings lock or  Canada French ratings lock  then press OK     4 Use A Y to select the desired rating  then press OK repeatedly to  switch between view and block      x  indicates that the rating is locked   e    indicates that the rating is not locked     Canada French  ratings lock    Canada English    ratings lock Description       A    Locked all ratings    Exempt program    For all children    e        e    For children over 8            General audience       8ans  Unsuitable for ages under 8       Parental guidance suggested       T    13ans  Unsuitable for ages under 13       14     Unsuitable for ages under 14       16ans  Unsuitable for ages under 16       18  18ans    Adult audience only 
99. ht holder  or other authorized party saying it may be distributed under  the terms of this Lesser General Public License  also called    this  License      Each licensee is addressed as    you        A    library    means a collection of software functions and or  data prepared so as to be conveniently linked with application  programs  which use some of those functions and data  to form  executables     The    Library     below  refers to any such software library or work  which has been distributed under these terms  A    work based  on the Library    means either the Library or any derivative  work under copyright law  that is to say  a work containing the  Library or a portion of it  either verbatim or with modifications  and or translated straightforwardly into another language    Hereinafter  translation is included without limitation in the term     modification            Source code    for a work means the preferred form of the work  for making modifications to it  For a library  complete source code  means all the source code for all modules it contains  plus any  associated interface definition files  plus the scripts used to control  compilation and installation of the library     Activities other than copying  distribution and modification are not  covered by this License  they are outside its scope  The act of  running a program using the Library is not restricted  and output  from such a program is covered only if tts contents constitute a  work based on the Li
100. ials mentioning features or use of this  software must display the following acknowledgment     This  product includes software developed by the OpenSSL Project for  use In the OpenSSL Toolkit   http   www openssl org         A  The names    OpenSSL Toolkit    and    OpenSSL Project    must not be  used to endorse or promote products derived from this software  without prior written permission  For written permission  please  contact openssl core openssl org     vill    Ds Products derived from this software may not be called       OpenSSL     nor may    OpenSSL    appear in their names without prior written  permission of the OpenSSL Project     6  Redistributions of any form whatsoever must retain the following  acknowledgment     This product includes software developed by  the OpenSSL Project for use in the OpenSSL Toolkit  http   www   openssl org         THIS SOFTWARE 15 PROVIDED BY THE OpenSSL PROJECT     AS IS  AND ANY EXPRESSED OR IMPLIED WARRANTIES   INCLUDING  BUT NOT LIMITED TO  THE IMPLIED WARRANTIES OF  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE  ARE DISCLAIMED IN NO EVENT SHALL THE OpenSSL PROJECT  OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT  INDIRECT   INCIDENTAL  SPECIAL  EXEMPLARY OR CONSEQUENTIAL  DAMAGES  INCLUDING  BUT NOT LIMITED TO  PROCUREMENT  OF SUBSTITUTE GOODS  OR  SERVICES  LOSS OF USE  DATA  OR  PROFITS  OR BUSINESS INTERRUPTION  HOWEVER CAUSED AND  ON ANY THEORY OF LIABILITY  WHETHER IN CONTRACT  STRICT  LIABILITY  OR TORT  INCLUDING 
101. ice   e Changing channels may delay the Closed Caption for a few seconds   e Adjusting or muting the volume may delay the Closed Caption for a few seconds     e Abbreviations  symbols and other grammatical shortcuts may be used in order to keep  pace with the on screen action  This is not a malfunction           e The caption or text characters will not be displayed while the Home menu or functions  display is shown  2 Use the NUMBER buttons to enter the 4 digit numbers for your  e Ifa black box appears on the TV screen  this means that the Closed Caption is set to PIN code   the text mode  lo clear the box  select CC 1  CC 2  CC 3 or CC 4   e Ifthe unit receives poor quality television signals  the captions may contain errors or   When YOU have not set Up your PIN code  enter 0  0  0  0   there might be no captions at all  Some possible causes of poor quality signals are  e When the PIN code is correct  Child lock menu is displayed       Automobile ignition noise      Electric motor noise See the following description for setting each item         Weak signal reception      Multiplex signal reception  ghosts or screen flutter   Data dropout and Pixelation  for DTV only  Channel lock Select    e The unit retains the Closed Caption setting if the power fails     e When the unit receives special effects playback signal  e g  Search  Slow and Still  from a Tv ratings lock select  VCR s video Output channel  ch3 or ch4   the unit may not display the correct caption Child lock Mov
102. ice and this permission notice appear in supporting  documentation  and that the name of M I  T  not be used in advertising  or publicity pertaining to distribution of the software without specific   written prior permission  M I  I  makes no representations about the  suitability of this software for any purpose  It is provided    as is    without  express or implied warranty     libxml2  Copyright  C  1998 2003 Daniel Veillard  All Rights Reserved     lua  Copyright  c  1994 2010 Lua org  PUC Rio    lua xmlreader  Copyright  c  2008 A S  Bradbury    lua sIncrypto    Copyright  c  2005 Malete Partner  Berlin  partner malete org    giflib  The GIFLIB distribution is Copyright  c  1997 Eric S  Raymond    Permission is hereby granted  free of charge  to any person obtaining a  copy of this software and associated documentation files  the    Software      to deal in the Software without restriction  including without limitation the  rights to use  copy  modify  merge  publish  distribute  sublicense  and or sell  copies of the Software  and to permit persons to whom the Software is  furnished to do so  subject to the following conditions     The above copyright notice and this permission notice shall be included  in all copies or substantial portions of the Software     THE SOFTWARE IS PROVIDED    AS IS   WITHOUT WARRANTY OF  ANY KIND  EXPRESS OR IMPLIED  INCLUDING BUT NOT LIMITED  TO THE WARRANTIES OF MERCHANTABILITY  FITNESS FOR A  PARTICULAR PURPOSE AND NONINFRINGEMENT  IN NO
103. ider to make specific  settings in accordance with your network environment     3 Use A Y to select IP configuration  then press OK   4 Use AY to select a setting  then press OK           META  AED  192 168 11 1  192 168 11 1  0 0 0 0    00 12 0E 10 09 15      IP setting mode    IP configuration    Sets the IP setting automatically   IP setting mode    Sets the IP setting manually   A set of numbers which are assigned to   1 3 8  IP address devices participating in a computer network   A mask which is used to determine what   1 3  Subnet mask subnet an IP address belongs to   IP address of the network device  such as   1 3   Default gateway router  which provides Internet access    DNS Sets the DNS setting automatically    ing mod     Sc Sets the DNS setting manually     f A server which handles the name and IP   2 3  Primary DNS address over the Internet   A server which handles the name and IP   2 3  Secondary DNS address over the Internet   An address which recognizes the devices  MAC address connecting to the network  It is also called  Hardware Address      1 Items can be selected only when IP setting mode is set to Manual     2 Items can be selected only when DNS setting mode is set to Manual     3 Use A V or the NUMBER buttons to input numbers  When you use  A Y to input numbers  then press OK or input the triple digits by using  the NUMBER buttons  the cursor moves to the next entry field  When you  use A Y to input numbers  then press OK or input the triple digits by
104. ie ratings lock Select  or text  AAA AA UO E       Canada English ratings lo Select       Sleeptimer Canada French ratings lo Select        Region ratings lock Select  Sleep timer can set the unit to go into Standby mode after an    incremental period of time      1 Use A Y to select Sleeptimer  then press OK        2 Use  gt  repeatedly to change the amount of time     increases the time by 5 minutes up to 180 minutes   Note            Each press of  lt  will decrease the time by  gt  minutes  e When you select the higher rating and set it to  X   the lower ratings will be blocked  e Press INFO once to call up the display for checking the automatically   remaining time  e When you set the All to     all ratings return to    automatically     e Region ratings lock will be available when the unit receives a Digital broadcast using    e To cancel the sleep timer press    repeatedly until 0     is fie new ratno stern       displayed  e To block any inappropriate programs  set your limits in TV ratings lock   Movie ratings lock and Region ratings lock   Note e The child lock setting will be retained after a power failure or after the power is  removed for longer than 10 seconds     You can also press SLEEP directly to switch the desired setting  mp p 25 e For the United States  the unit may download the Region Ratings Lock Table  if required              e The Canadian rating systems on this unit are based on CEA 766 A and CRTC policy        Continued on next page     Channel loc
105. ightforward reasons that people believe in it     Peter s rock star  It   s not so rich a country as your country        4 When you press COLOR button  blue  in 1 or 2 list view  the  timeline will increase 5 lines     5 List View    Phily and Maggy  Right as rain  That was a sense of humor       Perseverance prevails   I ll be there  textbook in hand     Tinner Loberto less than 1 minute    Greetings    am looking for a small tiny stove in which to heat once a day     Propatanga less than 1 minute  Would you like the straightforward reasons that people believe in it     Peter   s rock star  It   s not so rich a country as your country        24 English    Viewing Trends on Twitter    Trends show topics trending in your area     1  2    Follow steps 1 to 2 in Viewing tweets on the TV  im   p 23    Use av to select Trends  then press OK     e Press COLOR button  green  to switch between the Area and  Trends    e If you display Area  the topside will be displayed some countries   and the downside will be displayed some cities        Using auto mode    1 Press AUTO MODE to set your TV to a predefined picture and  sound setting     AUTO    O Pp    AUTO OPTIONS  MODE FAV SLEEP       2 Use A Vto select one of the following settings      Auto picture    The customized settings you defined using  the Picture and Sound menu    Vivid Enhanced picture contrast  sharpness and  sound for viewing in a well lit room  Sports Brilliant picture settings and clear sound for  po high action    S
106. ill be displayed   Use A Y to select the appropriate the SSID  then press OK     Router 1 ulil Enter Key    alll Select    all Enter Key    af Select    e If you select the SSID with E  WEP  WPA Key entry screen will  appear   Enter the WEP  WPA key of the selected wireless network  using A Y  lt P  then press OK    e If you select the SSID has a WPS  the WPS setting screen will  appear   Use A Y  lt P to select a setting  then press OK     Select this setting if your router has a WPS  button  Start scanning for wireless networks on  Easy connect the TV after pressing the WPS button on your  router  If connection test fails  refer to the router s  manual for more details   Select this setting if your router has a WPS but  WPS code does not have a WPS button  Enter the 8 digit  WPS PIN code shown on your TV in the router  settings menu via PC before Connect is selected   If your wireless network with authentication  setting  VWERWWPA PSK or WPA2 PSK    Manual WEP WPA Key entry screen will appear  Enter  the WEP WPA key of the selected wireless  network using A Y  lt P  then press OK     e Confirmation message will appear Select OK to complete the  settings        Note             e Fora wireless network with authentication setting  key icon appears to the right hand  of the SSID    e Signal icon shows the strength of the signal    e WEP  WPA key appears as asterisks on the confirmation screen     e The wireless LAN supports following specifications       Wireless standards   I
107. ined for  a version of the library must be consistent with the full freedom of use  specified in this license     Most GNU software  including some libraries  is covered by the ordinary  GNU General Public License  This license  the GNU Lesser General  Public License  applies to certain designated libraries  and is quite different  from the ordinary General Public License  We use this license for certain  libraries in order to permit linking those libraries into non free programs     When a program is linked with a library  whether statically or using a  shared library  the combination of the two Is legally speaking a combined  work  a derivative of the original library  The ordinary General Public  License therefore permits such linking only if the entire combination fits    its criteria of freedom  The Lesser General Public License permits more  lax criteria for linking other code with the library     We call this license the    Lesser    General Public License because it does  Less to protect the user s freedom than the ordinary General Public  License  It also provides other free software developers Less of an  advantage over competing non free programs  These disadvantages are  the reason we use the ordinary General Public License for many libraries   However  the Lesser license provides advantages in certain special  circumstances     For example  on rare occasions  there may be a special need to encourage  the widest possible use of a certain library  so that it become
108. ing 49  8 Information 52  Glossary 52  Maintenance az  9 Specifications 53  10 Warranty 54  License end of book    English    3 English    Return your Product Registration Card or visit at       http   www productrecords com philips  today to get the very most from your purchase     Registering your model with Philips makes you eligible for all of the valuable benefits listed below  so don t miss out   Complete and return your Product Registration Card at once or visit at www  philips com support to ensure            Product Safety Notification  Additional Benefits  By registering your product  you ll receive notification   Registering your product guarantees that you ll receive  directly from the manufacturer   in the rare case of a all of the privileges to which you re entitled  including  product recall or safety defect  special money saving offers   Know these SA fety symbols The lightning flash with arrowhead symbol  within an equilateral  triangle  is intended to alert the user to the presence of  CAUTIO N uninsulated    dangerous voltage    within the apparatus s enclosure  RISK OF ELECTRIC SHOCK that may be of sufficient magnitude to constitute a risk of  electric shock to persons   DO NOT OPEN eT  CAUTION  TO REDUCE THE RISK OF ELECTRIC SHOCK  DO NOT The exclamation point within an equilateral triangle is intended to  REMOVE COVER  OR BACK   NO USER SERVICEABLE PARTS alert the user to the presence of important operating and  INSIDE  REFER SERVICING TO QUALIFIED SERVI
109. ions  type    show c    for details     The hypothetical commands    show w    and    show c  should show the  appropriate parts of the General Public License  Of course  the commands  you use may be called something other than    show w  and    show c  they  could even be mouse clicks or menu ttems  whatever suits your program     You should also get your employer  if you work as a programmer  or  your school  if any  to sign a    copyright disclaimer    for the program  if  necessary     Here Is a sample  alter the names     Yoyodyne  Inc   hereby disclaims all copyright interest in the program     Gnomovision     which makes passes at compilers  written by James  Hacker     signature of ly Coon  1 April 1989  Ty Coon  President ofVice    This General Public License does not permit incorporating your program  into proprietary programs  If your program is a subroutine library  you  may consider it more useful to permit linking proprietary applications  with the library  If this is what you want to do  use the GNU Lesser  General Public License instead of this License     If you are interested in obtaining GPL source code used in this product   please contact    Open Source Team  P amp F USA  Inc   PO Box 2248  Alpharetta  GA 30023   2248     LGPL    GNU LESSER GENERAL PUBLIC LICENSE   Version 2 1  February 1999   Copyright  C  1991  1999 Free Software Foundation  Inc   51 Franklin Street  Fifth Floor Boston  MA 02110 1301 USA    Everyone is permitted to copy and distribute v
110. ions categorized by location       Genre List of stations categorized by genre       List of the latest stations which are recently    New Stations added automatically        List of the most frequently accessed    Most Popular Stations stations by the all listeners           3 Inthe station folder list  use A Y to select the desired station  then  press OK   e After loading  playback of the selected station will start     e If you select a folder  use A Y to select the desired station in the  next hierarchy  then press OK     e To stop playback  press M   e To go back to the previous or next hierarchy  press  lt P     2      Note    e This unit cannot play back stations with audio format other than MP3 and WMA     e Internet radio service may not be fully available with narrowband Internet connection    e g  56k modem  When listening to Internet radio  use broadband Internet connection    For details  contact your Internet service provider     e Depending on the bit rate of a station or the network environment  it may take a while  to complete loading the station or playback may not be available     e The streaming audio may be interrupted during playback  when the v Tuner server is busy   e Some stations cannot be displayed in the list  depending on the network environment   e If the loading time of a station exceeds 3 minutes  the loading will be canceled     e The order of station folder in the list depends on the information from v Tuner server  and may change without no
111. ions of source code must retain the copyright notice   this list of conditions and the following disclaimer        Redistributions in binary form must reproduce the above  copyright notice  this list of conditions and the following disclaimer  in the documentation and or other materials provided with the  distribution     3  All advertising materials mentioning features or use of this  software must display the following acknowledgement     This  product includes cryptographic software written by Eric Young   eayOcryptsoft com        The word  cryptographic  can be left out if the rouines from the  library being used are not cryptographic related         A If you include any Windows specific code  or a derivative thereof   from the apps directory  application code  you must include an  acknowledgement     This product includes software written by Tim  Hudson  tih cryptsoft com              THIS SOFTWARE IS PROVIDED BY ERIC YOUNG TAS IS  AND  ANY EXPRESS OR IMPLIED WARRANTIES  INCLUDING  BUT NOT  LIMITED TO  THE IMPLIED WARRANTIES OF MERCHANTABILITY  AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN  NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE  FORANY DIRECT  INDIRECT  INCIDENTAL  SPECIAL  EXEMPLARY  OR  CONSEQUENTIAL DAMAGES  INCLUDING  BUT NOT LIMITED TO   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES  LOSS OF  USE  DATA  OR PROFITS  OR BUSINESS INTERRUPTION  HOWEVER  CAUSED AND ON ANY THEORY OF LIABILITY  WHETHER IN  CONTRACT  STRICT LIABILITY  ORTORT  INCLUDING 
112. is permission  notice appear with all copies of the Data Files or Software   b  both the  above copyright notice s  and this permission notice appear in associated  documentation  and  c  there is clear notice in each modified Data File or  in the Software as well as in the documentation associated with the Data  File s  or Software that the data or software has been modified     THE DATA FILES AND SOFTWARE ARE PROVIDED  AS IS   WITHOUT  WARRANTY OF ANY KIND  EXPRESS OR IMPLIED  INCLUDING  BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY   FITNESS FORA PARTICULAR PURPOSE AND NONINFRINGEMENT  OF THIRD PARTY RIGHTS  IN NO EVENT SHALL THE COPYRIGHT  HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR  ANY CLAIM  OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL  DAMAGES  OR ANY DAMAGES WHATSOEVER RESULTING FROM  LOSS OF USE  DATA OR PROFITS  WHETHER IN AN ACTION  OF CONTRACT  NEGLIGENCE OR OTHER TORTIOUS ACTION   ARISING OUT OF OR IN CONNECTION WITH THE USE OR  PERFORMANCE OF THE DATA FILES OR SOFTWARE    Except as contained in this notice  the name of a copyright holder shall  not be used in advertising or otherwise to promote the sale  use or  other dealings in these Data Files or Software without prior written  authorization of the copyright holder     ADPCM   Copyright 1992 by Stichting Mathematisch Centrum  Amsterdam  The  Netherlands    All Rights Reserved    Permission to use  copy  modify  and distribute this software and its  documentation for any purpose and without fee
113. ived the program in object code or executable form with  such an offer  in accord with Subsection b above      The source code for a work means the preferred form ofthe work  for making modifications to it  For an executable work  complete  source code means all the source code for all modules it contains   plus any associated interface definition files  plus the scripts used to  control compilation and installation ofthe executable  However  as  a special exception  the source code distributed need not include  anything that is normally distributed  in either source or binary  form  with the major components  compiler  kernel  and so on   of the operating system on which the executable runs  unless that  component itself accompanies the executable     If distribution of executable or object code is made by offering  access to copy from a designated place  then offering equivalent  access to copy the source code from the same place counts as  distribution of the source code  even though third parties are not  compelled to copy the source along with the object code     You may not copy  modify  sublicense  or distribute the Program  except as expressly provided under this License  Any attempt  otherwise to copy  modify  sublicense or distribute the Program  is void  and will automatically terminate your rights under this  License  However  parties who have received copies  or rights   from you under this License will not have their licenses terminated  so long as such parties 
114. k    Particular channels or external Input modes can be invisible in this  function     3 Use A Y to select Channel lock  then press OK     4 Use A Y to select the particular channels or external Input  then  press OK repeatedly to switch between view and block      x  indicates that the channel or Input Source is locked   e     indicates that the channel or Input Source   is not locked        Channel lock    Child lock        HDMI 1      HDMI 2   _  HDMI 3   _  Video                Setting TV and movie ratings    Movie ratings lock is the rating system created by MPAA  TV ratings lock  has controlled access to individual programs based on their age ratings  and content rating     3 Use AY to select TV ratings lock or Movie ratings lock  then  press OK     4 Use A Y to select the desired rating  then press OK repeatedly to  switch between view and block    e  Xx  indicates that the rating is locked    e  1 indicates that the sub rating is locked    e      indicates that the rating is not locked     TV ratings lock             TV ratings lock                Movie ratings lock        gt      lt a                   35       US movie USTV  ratings ratings    Description    A  re reno rara  A  one  org      Ter ea OOO      poor ral een Tara oe    rar      Tort oro waers   a Unsuitable for children under 14   for children under Unsuitable for children under 14     A    parent or adult aan   C near      No one wder Taani    To set the sub ratings    For TV ratings lock  you can furt
115. k if the Audio cable is connected into the unit correctly    You may be getting interference from electrical appliances  automobiles  motorcycles or fluorescent lights when viewing an off the   air low power NTSC analog broadcast signal    Try moving the unit to another location to see if this is the cause of the problem    Electrical interference from nearby appliances may affect picture quality when viewing an off the air low power NTSC analog  broadcast signal    View other TV channels  The problem might be limited to the broadcasting station or weak signal strength    When the capabilities of the unit exceed the capabilities of the Digital broadcasting  the signal will be increased to match the    capabilities of the display of the unit  This may cause noise or trash   When viewing an off the air low power NTSC Analog broadcast signal may show noise or trash on the screen     View other TV channels  The problem might be limited to the broadcasting station  missing data or pixelation     This unit will memorize the volume level from the last time you adjusted it   If the volume of the sound from another device is higher or lower  then the loudness will change   Make sure AVL is set to On  m    p 32    This unit will memorize the viewing mode from the last time you used the particular Input modes     If you are using the unit as a PC monitor  make sure that Horizontal shift and Vertical shift in Picture are set correctly  m p 30  If you are watching TV or using the Composit
116. k you to surrender these  rights  These restrictions translate to certain responsibilities for you if you  distribute copies of the library or if you modify it     For example  if you distribute copies of the library  whether gratis or for a  fee  you must give the recipients all the rights that we gave you  You must  make sure that they  too  receive or can get the source code  If you link  other code with the library  you must provide complete object files to  the recipients  so that they can relink them with the library after making  changes to the library and recompiling it  And you must show them these  terms so they know their rights     We protect your rights with a two step method   1  we copyright the  library  and  2  we offer you this license  which gives you legal permission  to copy  distribute and or modify the library     To protect each distributor we want to make it very clear that there Is no  warranty for the free library  Also  if the library is modified by someone  else and passed on  the recipients should know that what they have Is not  the original version  so that the original author s reputation will not be  affected by problems that might be introduced by others     Finally  software patents pose a constant threat to the existence of any  free program  We wish to make sure that a company cannot effectively  restrict the users of a free program by obtaining a restrictive license from  a patent holder  Therefore  we insist that any patent license obta
117. ker  then press OK   3 Use A Y to select Off  then press OK        38 English       Use Philips EasyLink    Your TV supports Philips EasyLink  which enables one touch play and  one touch Standby between EasyLink compliant devices  Compliant  devices must be connected via an HDMI connector     One touch play   When you connect your TV to devices that support one touch play   you can control your TV and the devices with one remote control  For  example  when you press B  play  on your DVD remote control  your  TV automatically switches to the correct channel to show the DVD  content     One touch Standby   When you connect your TV to devices that support Standby  you can  use your TV remote control to put your TV and all connected HDMI  devices in Standby mode  You can perform one touch Standby using the  remote control from any of the connected HDMI devices     System audio control   When you connect your TV to HDMI CEC compliant devices  your  TV can switch automatically to play audio from the connected device   To use one touch audio  you must map the audio input from the  connected device to your TV  You can use the remote control from the  connected device to adjust the volume     Remote control  RC  key forwarding    RC key forwarding allows you to control EasyLink compliant devices  using your 1V remote control     HDMI ARC  Audio Return Channel     HDMI ARC allows you to use Philips EasyLink to output TV audio  directly to a connected Audio device  without the need for 
118. le  the required form of the    work that uses  the Library    must include any data and utility programs needed  for reproducing the executable from it  However  as a special  exception  the materials to be distributed need not include  anything that is normally distributed  in either source or binary  form  with the major components  compiler kernel  and so on   of the operating system on which the executable runs  unless that  component Itself accompanies the executable     It may happen that this requirement contradicts the license  restrictions of other proprietary libraries that do not normally  accompany the operating system  Such a contradiction means you  cannot use both them and the Library together in an executable  that you distribute     You may place library facilities that are a work based on the  Library side by side in a single library together with other  library facilities not covered by this License  and distribute such  a combined library  provided that the separate distribution of the  work based on the Library and of the other library facilities is  otherwise permitted  and provided that you do these two things     a  Accompany the combined library with a copy of the same  work based on the Library  uncombined with any other library  facilities  This must be distributed under the terms of the  Sections above     b  Give prominent notice with the combined library of the fact  that part of it is a work based on the Library  and explaining  where to find t
119. luner website  You can add stations which are not in the vluner station list     1 Follow step 1 in Internet radio playback  m   p 21    2 Use A Y to select Get access code  then press OK     e The latest vluner website address and access code for this unit  will be displayed  Please take a note of the access code   This  access code will be required when creating a vluner account      3 On your PC  visit the website and create your v luner account   e Follow the instructions given on the PC screen    4 Add stations by following the instructions given on the PC screen   e The stations will be added to My Added Stations     Reset the station list    You can remove all stations folders in Recently Played  Favorites and  My Added Stations     1  2  3       Follow step 1 in Internet radio playback  m    p 21  Use A Y to select Reset  then press OK     Use  lt P to select Yes  then press OK     e All stations folders in Recently Played  Favorites and  My Added Stations are removed     Pandora   operations    With this unit  you can instantly listen to personalized radio stations  streamed over the Internet from Pandora     To learn more about Pandora  please visit www pandora com    Activating Pandora    In order to listen to Internet radio streamed from Pandora via the  Internet  you must create a Pandora account and activate this unit     N ON UT LUN      Press NET TV  then use A Y    gt    to select PANDORA   Use A Y to select Create new account  then press OK   Use A Y to sele
120. memorized after the unit goes into Standby mode     1 Press MENU EXIT and use A Y  lt P to select Setup  then press    OK     2 Use A Y to select Sound  then press OK     Auto sound Personal   Equalizer Start now   Balance A ESSERE  Digital audio language English  NS On   AVL ii   TV speakers On    Delta volume A NN       3 Use A Y  lt P to select the item you want to adjust  then press    OK     The following sound settings can be configured  Depending on the  format of the broadcasting  some sound settings are not available     Auto sound    to select the desired setting   Personal  Standard  Vivid  Sports  Movie  Music and  News     When you adjust the following settings  Equalizer   SRS TruSurround XT and AVL   Personal will be set  automatically        Adjust the tonal quality for each frequency     Equalizer       to adjust the each level of tonal quality  Press BACK to go back to the previous menu     Adjust the speakers to suit your listening preference        Balance    to adjust the balance of the right and left speakers    Sy        Digital TV operation    You can select the Audio language while your TV is receiving the Digital  broadcasting     Digital audio _  to select the language according to your preference   language  It differs depending on the program          You can select Main or SAP while your TV is receiving the Analog    broadcasting that has the SAP  Second Audio Program     It differs depending on the program         to output main audio  Alternate
121. n length   then the use of the object  file is unrestricted  regardless of whether it is legally a derivative  work   Executables containing this object code plus portions of  the Library will still fall under Section 6      Otherwise  if the work is a derivative of the Library  you may  distribute the object code for the work under the terms of  Section 6  Any executables containing that work also fall under  Section 6  whether or not they are linked directly with the Library  itself     As an exception to the Sections above  you may also combine or  link a    work that uses the Library    with the Library to produce  a work containing portions of the Library  and distribute that  work under terms of your choice  provided that the terms permit  modification of the work for the customer s own use and reverse  engineering for debugging such modifications     You must give prominent notice with each copy of the work  that the Library is used in tt and that the Library and Its use are  covered by this License  You must supply a copy of this License   If the work during execution displays copyright notices  you must  include the copyright notice for the Library among them  as well  as a reference directing the user to the copy of this License  Also   you must do one of these things     a  Accompany the work with the complete corresponding  machine readable source code for the Library including  whatever changes were used in the work  which must be  distributed under Sections 1 an
122. n of Conformity    Trade Name  PHILIPS   Responsible Party  P amp F USA  Inc    Model  32 PER 20   26r re 707  22FF97   Address  PO Box 2248  Alpharetta  GA 30023 2248  USA     Telephone Number  1 866 309 0843       5 English    Modifications    This apparatus may generate or use radio frequency energy  Changes or  modifications to this apparatus may cause harmful interference    unless the modifications are expressly approved in the User Manual   The user could lose the authority to operate this apparatus if an  unauthorized change or modification is made     Cables    Connections to this device must be made with shielded cables with  metallic RFI EMI connector hoods to maintain compliance with FCC  Rules and Regulations     Canadian notice    This Class B Digital apparatus complies with Canadian ICES 003   Standard Television Receiving Apparatus  Canada BETS 7  NTMR 7     The following FCC IC RSS Gen is description of USB  Wireless LAN adapter     FCC Caution Any changes or modifications not expressly approved  by the party responsible for compliance could void the user   s  authority to operate this equipment    This transmitter must not be co located or operating in conjunction  with any other antenna or transmitter    Country Code Statement    For product available in the USA market  only channel 1 11 can be  operated  Selection of other channels is not possible    To maintain compliance with FCC RF exposure requirements  use  only belt clips  holsters or similar accesso
123. n this License  Recipient must  make it absolutely clear that any of its terms which differ from  this License are offered by Recipient alone  and not by SGI  It is  emphasized that this License is a limited license  and  regardless of  the license form employed by Recipient in accordance with this  Section 3 2  Recipient may relicense only such rights  in Original  Code and Modifications by SGI  as it has actually been granted by  SGI in this License     Indemnity  Recipient hereby agrees to indemnify SGI for any  liability incurred by SGI as a result of any such alternative license  terms Recipient offers     Termination  This License and the rights granted hereunder will  terminate automatically if Recipient breaches any term herein and  fails to cure such breach within 30 days thereof  Any sublicense  to the Covered Code that is properly granted shall survive any  termination of this License  absent termination by the terms of  such sublicense  Provisions that  by their nature  must remain in  effect beyond the termination of this License  shall survive     No Trademark Or Other Rights  This License does not grant any  rights to   1  any software apart from the Covered Code  nor  shall any other rights or licenses not expressly granted hereunder  arise by implication  estoppel or otherwise with respect to the  Covered Code   ii  any trade name  trademark or service mark  whatsoever including without limitation any related right for  purposes of endorsement or promotion of
124. nels are not displayed on the list of favorite  channels     e To reactivate a removed channel  use A Y then press OK           Preferences    You can set the unit to reduce the power consumption or adjust the  backlight brightness in Location setting   EasyLink allows you to operate your connected EasyLink device     Setting your location to home  Choosing Home gives you full flexibility to change predefined settings  for picture and sound     1 Use A Y to select Preferences  then press OK   2 Use A Y to select Location  then press OK     Location Retail store    Home    Preferences       3 Use A Y to select Home  then press OK     The unit will be set up with predefined settings for  retail displays  In this setting  the power consumption  may possibly exceed the limit requirement of the  ENERGY STAR   qualification     This setting is ENERGY STAR   qualified    The unit is set to maximize the energy efficiency   for home setting and it can be adjusted through a  choice of picture and sound quality according to your  preference     Retail store    Note       e You must set Home  Otherwise  personalized picture and sound settings will not be  memorized after the unit goes into Standby mode   e If you select Home  E sticker will not be displayed        E sticker    When you set Location to Retail store  E sticker  Electronic Sticker  is  displayed  E sticker can be Turned Off using procedure below     1 Use A Y to select Preferences  then press OK   2 Use A Y to select E stic
125. njoyable and safe     TUNE INTO SAFETY    e One size does NOT fit all  Follow the manufacturer s recommendations for the safe installation and use of your flat panel display   e Carefully read and understand all enclosed instructions for proper use of this product   e Do not allow children to climb on or play with furniture that the television set is sitting on or mounted to   e Don t place flat panel displays on furniture that can easily be used as steps  such as a chest of drawers   e Remember that children can become excited while watching a program  especially on a    larger than life      flat panel display  Care should be taken to place or install the display where it cannot be pushed  pulled over or knocked down   e Care should be taken to route all cords and cables connected to the flat panel display so that they cannot   be pulled or grabbed by curious children     WALL MOUNTING  IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY  ALWAYS     e Use a mount that has been recommended by the display manufacturer and or listed by an independent laboratory  such as UL  CSA  ETL    e Follow all instructions supplied by the display and wall mount manufacturers    e  f you have any doubts about your ability to safely install your flat panel display  contact your retailer about professional installation    e Make sure that the wall where you are mounting the display is appropriate     PA  Some wall mounts are not designed to be mounted to walls with steel studs or old cinder 
126. nnected device and wait a few seconds till the picture appears     e g    SEI    CK  gt  METER  DTV TV channel       y       4    Ee  a E    e Pressing A reverses the direction of the Input modes        2 Use the remote control of the set top box or the connected device  to select channels        Access the Home menu       Press MENU EXIT        Guide to Home menu    e       Watch TV   Switches back to the antenna source if  another source is selected   Net TV   Accesses Net TV menus     Add new devices  Adds new devices to the Home menu     ale e    Browse USB   Accesses USB menus   Browse PC   Accesses DELNA menus   Setup   Accesses menus that allow you to    change picture  sound and other TV  settings     16    e After selecting Add new devices  follow the on screen instructions to select the correct  device and connector           Lock or unlock your device from the Home menu  This section describes how to lock or unlock specified device   Press MENU EXIT on the remote control    Use A Y  lt P to select a device to lock or unlock     Press OPTIONS on the remote control     Lh UN      Use A Y to select Device lock or Device unlock  then press OK     e If device lock is unlocked  Device lock will be displayed  If device  lock is locked  Device unlock will be displayed and El will be  displayed at the top right of the device icons     5 Enter your PIN  Change PIN im p 36    e Once you have set PIN  PIN input menu does not appear after  the unit is Turned on     Enable or di
127. nr Most       Previous Next 2 3 Favorite G      4  Category   List of category menus  Recommendations   List of recommendation stations  Favorites   List of your favorite video stations  Genre   List of stations categorized by genre    Most Popular Podcasts   List of popular podcasts  Station list  Operation guide      Displays station list       Displays COLOR buttons   red   green   yellow   blue  guide     ES    1 Press NET TV on the remote control and then use A V       to  select v Tuner Video     Use  lt P to select the desired category  then press OK     UI N    In the player screen  use A Y  lt P to select the desired station or  genre  then press OK     Guide to the playback screen    0  o   ra  Tuner  Reco _  Favo Genre Most    NEWS NEWS  Video   L The latestnews oo O    NEWS NEWS  11 25 10   NEWS NEWS  11 24 10   NEWS NEWS  11 23 10   NEWS NEWS  11 22 10   NEWS NEWS  11 21 10     Previous Favorite    Date    O Duration       Station icon   Station name   Station information   Episode list   COLOR buttons  red   green  yellow blue  guide    CASAS IIS LO     Current episode information    20 English    4 In the playback screen  use A V to select the desired episode  then  play p  press OK     e After loading  playback of the selected episode will start   e To stop playback  press M     e Episode list can be displayed 5 episodes at one time  lo show  the previous  next episodes  press COLOR buttons  red   green      e To enlarge playback screen  press COLOR button  bl
128. o   and the Pandora trade dress are  trademarks or registered trademarks  of Pandora Media  Inc  Used with  permission     6 English    Euwtter i Twitter is a trademark of Twitter Inc        i     vluner is a trademark of Nothing Else    vT U n e cr Matters Software  Ltd     Wireless   gt    LAN Media connect    Portions of this software are copyright    The Free Type Project   www freetype org      The American Academy of Pediatrics discourages television viewing for  children younger than two years of age     2 Important       Positioning the TV    e Large screen TVs are heavy  2 people are required to carry and  handle a large screen TV    e Make sure to hold the upper and bottom  frames of the unit firmly as illustrated    e Install the unit in a horizontal and stable  position    e Do not install the unit in direct sunlight  or in a place subject to dust or strong  vibration    e Depending on the environment  the temperature of this unit may  increase slightly  This is not a malfunction    e Avoid a place with drastic temperature changes    e Do not place anything directly on top or bottom of the unit    e Depending on your external devices  noise or disturbance of the  picture and or sound may be generated if the unit is placed too  close to them  In this case  please ensure enough space between  the external devices and the unit    e Do not insert the AC power cord into the power socket outlet  before all the connections are made    e     Ensure that you always have ea
129. o copy  from a designated place  then offering equivalent access to copy  the source code from the same place satisfies the requirement  to distribute the source code  even though third parties are not  compelled to copy the source along with the object code     A program that contains no derivative of any portion of the Library   but is designed to work with the Library by being compiled or  linked with it  is called a    work that uses the Library     Such a work   in isolation  is not a derivative work of the Library  and therefore  falls outside the scope of this License     However  linking a    work that uses the Library    with the Library  creates an executable that is a derivative of the Library  because  it contains portions of the Library   rather than a    work that uses  the library     The executable is therefore covered by this License   Section 6 states terms for distribution of such executables     When a    work that uses the Library    uses material from a header  file that is part of the Library  the object code for the work may  be a derivative work of the Library even though the source code  is not  Whether this is true is especially significant if the work can  be linked without the Library  or if the work is itself a library  The  threshold for this to be true is not precisely defined by law     If such an object file uses only numerical parameters  data  structure layouts and accessors  and small macros and small inline  functions  ten lines or less i
130. o the unit to have it as a table top unit   Be sure the front and rear of the base match the proper direction   For large screen TVs  at least 2 people are required for these steps     1    32  26  X 3          Note       e Make sure to use a table which can support the weight of this unit and is larger than  this unit    e Make sure the table is in a stable location    e When attaching the base  ensure that    FRONT    with    arrow    written on the bottom of  the base is downward  If it s not downward  the 2 hooks don t fit into the base    e When attaching the base  ensure that all screws are tightly fastened  If the base is not  properly attached  it could cause the unit to fall  resulting in injuries as well as damage  to the unit    e To remove the base from this unit  unscrew the Phillips head screws in step 2    Be careful not to drop the base when you remove it        9 English       Managing cables    Route your antenna cable and all other cables through the cable  management tie at the back of the TV   The holder helps keep your cables tidy and easily manageable     d Attach the cable management tie as illustrated below        Installing the remote control batteries    N      3       e Remove the batteries if not using the remote control for an extended period of time        Slide the battery cover off the back of the remote control     Insert the 2 supplied batteries  AAA  1 5V   Be sure the   and      ends of the batteries line up with the markings inside the ca
131. oProgram function can be executed for either Antenna or Cable only  once  When you change the connection  Antenna   Cable   set Autoprogram again   m    p 37                After an initial setup is completed     e  f you want to scan the channels automatically again   Autoprogram m    p 37    e You can add the desired cable and Analog channels  unmemorized by AutoProgram     Weak channel installation m    p 37  e  f you want to change to another language    Language m    p 36  e  f you want to change the country setting    Country mp p 19  e  f you want to change the location setting    Location m    p 38  e  f you want to change the network setting    Network mp p 40    e If you want to restore the picture setting   Settings assistant m    p 30    14    English    4 Use your TV       Switching on your TV and putting it in  Standby mode     lt  voL P gt  MENU SOURCE       AUTO OPTIONS  MODE FAV SLEEP    To Turn Power On or to Turn Standby On    e Touch or press    on the front panel or the remote control     Note       e Energy consumption contributes to air and water pollution  When the AC power  cord is plugged in  your TV consumes energy  Your TV has very low Standby power  consumption           Adjusting volume    MENU SOURCE vV CH A       To increase or decrease volume    e Touch VOL  lt  down    gt   up  on the front panel or press  VOL     on the remote control    To mute or unmute sound   e Press MUTE on the remote control to mute the sound    e Press MUTE again or V
132. of Digital  caption options     You can change Closed Captioning font size  style  color  and transparency   o  Size  Style  Text Color and Text opacity   Digital caption  opti You can change background color and transparency of  ptions  the displayed caption      Background color and Background opacity     You can change edge color and type of the displayed  caption    Edge type and Edge color        Picture display       Font    dge  Style  Size  Text Color and Text opacity      Edge color and Edge type     Background   Background color and Background opacity     e Review your setting choice made below by looking in the upper  left corner of the displayed setting box  not all selections show   the differences selected     ral    ETT  C An     ALi Y UDTCTI     2    Y  u PEN E Y Spr      E NA i F       captioning or text is displayed in the same  language as the program s dialog  up to 4  lines of script on the TV screen      Serve as the preferred data channels  The  captioning or text is often a secondary  language     Rarely available and broadcasters use them  only in special conditions  such as when  CC 1 and CC 3 or T 1 and T 3 are not    Caption service available   e There are 3 display modes according to  programs     Bee Displays input characters on  the TV screen immediately     Once characters are stored in  Pop on   memory  they are displayed all  at once     Displays the characters  continuously by scrolling  max   4 lines         Continued on next page     34 En
133. of the product  Repairs may only be done by Service  Centers and official repair shops  Failure to do so shall void any  warranty  stated or implied     Any operation expressly prohibited in this User Manual  any adjustments  or assembly procedures not recommended or authorized in this User  Manual shall void the warranty     Federal Communications Commission Notice    This equipment has been tested and found to comply with the limits  for a Class B Digital device  pursuant to part 15 of the FCC Rules   These limits are designed to provide reasonable protection against  harmful interference in a residential installation  This equipment  generates  uses  and can radiate radio frequency energy and  if not  installed and used in accordance with the instructions  may cause  harmful interference to radio communications  However  there is no  guarantee that interference will not occur in a particular installation  If  this equipment does cause harmful interference to radio or television  reception  which can be determined by Turning the equipment Off and  On  the user is encouraged to try to correct the interference by one  or more of the following measures     e     Reorient or relocate the receiving antenna   e Increase the separation between the equipment and the receiver     e Connect the equipment into an outlet on a circuit different from  that to which the receiver is connected     e Consult the dealer or an experienced radio or television technician  for help     Declaratio
134. onnect download page at  www wifimediaconnect philips com   On the website  you can check the necessary PC system  requirements     Enter the 12 digit code you wrote at step 2     UI A    Click the    Download now    button to download the free  Philips Wireless MediaConnect software     6 Once downloaded  start the file    Philips Wireless MediaConnect_  setup exe   Follow the instructions on the screen to complete  software installation     Using Philips Wireless MediaConnect    1 Launch Philips Wireless MediaConnect on your PC first     e Select    Start projecting    with right click on the CJ in the  system tray   e The start up screen for Philips Wireless MediaConnect will  be displayed and the unit searches for an available PC that is  running Philips Wireless MediaConnect software   Once connected  the Philips Wireless MediaConnect software will  encode and stream the screen of your PC as a video along with audio     Depending on your computer and network configuration  there will be  a delay between your PC screen and the TV but the audio video will  always be In sync     Philips Wireless MediaConnect Help    To read the Philips Wireless MediaConnect Help  right click the program  icon in the notification tray of the PC and select Help    Specifics   You can project high definition  HD  or standard definition  SD  video   depending on the processing power of your PC  For smooth playback  of HD video  please use a hardware accelerated video player on your  computer  A
135. ons such as disc playback or call up the  menu of the connected devices  by using this unit s remote control   You can set each HDMI input to activate the RC key forwarding  Each  press of OK will toggle RC key forwarding On or Off       XJ indicates that the RC key forwarding is On      indicates that the RC key forwarding is Off     PLAY  PAUSE  gt     STOP MW     FWD      REV      OPTIONS    A Y 4    OK BACK    the NUMBER buttons can be used   to control your connected EasyLink   devices by this unit   s remote control     RC key forwarding       HDMI ARC allows you to use Philips EasyLink to output TV Audio  directly to a connected Audio device  without the need for an    additional Digital Audio cable  Disable HDMI ARC     You can output TV Audio through  HDMI ARC the HDMI cable solely  provided both  the TV and device are HDMI ARC    compliant           39 English    Device list    This function lets you see the product model number or name of  connected devices    Use A Y to select the desired EasyLink device listed on the TV screen   then press OK    Your connected EasyLink device will be Turned On if the device is in  Stand by mode        Device list HDMI 1  DVD recorder       Network    Set up network connection settings in order to use Net TV or network  upgrade function     The meanings of abbreviations are defined as below   AP   Wireless LAN Access Point  WPS  Wi Fi protected Setup  SSID  Wireless network name    The key entry screen will appear when you select 
136. ot  cover the entire screen     Captions are displayed as a white  box  No caption is displayed in  the Closed Caption supported  program     Black box is displayed on the TV  screen     Cannot connect to the network     Sometimes video quality is poor  when using the wireless LAN     Check whether the connection of the antenna  cable receiver or satellite box is connected correctly    Check whether all the cables to the unit are connected to the correct Output jack of your device like Blu ray  DVD recorder   Make sure that the selected Input mode is connected to the working Input jack    Check if your computer is NOT in sleep mode when the Input mode of this unit is in PC mode  lap any key on the keyboard to  wake up your computer    Check if the Power is On    Check whether all the cables to the unit are connected to the correct Output jack of your device like Blu ray  DVD recorder   View other TV channels  The problem might be limited to the broadcasting station or weak signal strength    Unplug the AC power cord and wait for about 1 minute  then plug the AC power cord and Turn On the unit again    Check whether the connection of the antenna  cable receiver or satellite box is connected correctly    Make sure that the selected Input mode is connected to the working Input jack     Check if your computer is NOT in sleep mode when the Input mode of this unit is in PC mode  lap any key on the keyboard to  wake up your computer     Make sure that the sound is not muted  Press M
137. ound  then press OK          In most cases  Digital channels are not broadcast on the RF channel on which they  appear on your TV  lo add Digital channels you need to know the RF channel on which  the Digital channel is being broadcast   e g  If there is a Digital channel 9 1 which is being  broadcast on RF channel 25  you need to enter 25 while performing a weak channel  installation   To find out the RF channel on which a particular Digital channel is being  broadcast  please contact your local service provider    Installing Digital channels using Weak channel installation might not work for direct  cable connections and if the Digital signal is too weak for the TV to process           Installation mode    1 Use A Y to select Channels  then press OK   2 Use A Y to select Installation mode  then press OK     3 Use A Y to select Antenna or Cable  then press OK     e When Antenna is selected  the TV detects antenna signals  It  searches for DIV and Analog TV channels available in your area     e When Cable is selected  the TV detects signals supplied by cable   It searches for DTV Analog TV and Cable channels available in  your area     Uninstall channels   Those channels can still be selected with the NUMBER buttons    1 Use A Y to select Channels  then press OK    2 Use A Y to select Uninstall channels  then press OK     3 Use A Y to select the channel you want to remove  then press OK     e You will not be able to select the channel again using CH         e The removed chan
138. ptible to signals     OUT cable  RF cable IN set top box  C      OUT                                   RF cable    Audio  L R     Video cables       IN    ee    OUT                           IN Audio  L R    Video cables    e If you have any question about the DT V s antenna  visit www antennaweb org for further  information     e Depending on your antenna system  you may need different types of combiners   mixers  or separators  splitters  for HDTV signal  The minimum RF bandpass on these  devices is 2 000MHz or 2GHz     e For your safety and to avoid damage to this unit  please unplug the RF coaxial cable  from the antenna Input jack before moving the unit     e Ifyou did use an antenna to receive Analog TV  it should also work for DTV reception   Outdoor or attic antennas will be more effective than a set top box or inside antenna     e To Turn On your reception source easily between antenna and cable  install an antenna  selector     e Ifyou are not receiving a signal from your cable service  contact the Cable provider     Only the left loudspeaker reproduces sound for mono equipment  Use a mono to       Blu ray disc  DVD recorder                stereo adapter  not supplied  for sound reproduction via all internal loudspeakers           Plugging in the AC power cord    Make sure that the AC power cord must be plugged to an AC outlet  after all the necessary connections are made     ma Caution       e Do not connect the AC power cord to a power supply outside the indicated
139. reen     Note       e 4 user names  accounts  can be stored in this unit           Continued on next page     Viewing Favorites on Twitter  Your TV displays the logged in user s favorites on Twitter    1 Follow steps 1 to 2 in Viewing tweets on the TV  m    p 23    2 Use A Y to select Favorite  then press OK     e If you have no favorites  TV was not able to acquire the Tweet   will appear    Displaying Mentions on Twitter  Your TV displays replies for the logged in user     1 Follow steps 1 to 2 in Viewing tweets on the TV  im p 23    2 Use A Y to select Mentions  then press OK     e If you have no replies  TV was not able to acquire the Tweet   will appear    Viewing Lists on Twitter    The list shows timeline categories such as friends  family  colleagues  or  sports teams created by yourself on your account     1 Follow steps 1 to 2 in Viewing tweets on the TV  m    p 23    2 Use A Y to select List  then press OK   e If you have no lists  Cannot get the list information  will appear     3 When you press COLOR button  yellow  in 1 or 5 list view  the  timeline will be separated at top and bottom  The upside displays 3  timelines and the downside display 2 timelines     2 List View    Phily and Maggy  Right as rain  That was a sense of humor       Perseverance prevails   I ll be there  textbook in hand        Tinner Loberto ess than 1 minute  Greetings    am looking for a small tiny stove in which to heat once a day     Propatanga less than 1 minute  Would you like the stra
140. regation of another work not based on the  Library with the Library  or with a work based on the Library  on  a volume of a storage or distribution medium does not bring the  other work under the scope of this License     You may opt to apply the terms of the ordinary GNU General  Public License instead of this License to a given copy of the  Library  To do this  you must alter all the notices that refer to this  License  so that they refer to the ordinary GNU General Public  License  version 2  instead of to this License   If a newer version  than version 2 of the ordinary GNU General Public License has  appeared  then you can specify that version instead if you wish    Do not make any other change in these notices     Once this change is made in a given copy  it is irreversible for that  copy  so the ordinary GNU General Public License applies to all  subsequent copies and derivative works made from that copy     This option is useful when you wish to copy part of the code of  the Library into a program that is not a library     You may copy and distribute the Library  or a portion or  derivative of it  under Section 2  in object code or executable  form under the terms of Sections 1 and 2 above provided that  you accompany it with the complete corresponding machine   readable source code  which must be distributed under the terms  of Sections 1 and 2 above on a medium customarily used for  software interchange     If distribution of object code is made by offering access t
141. remain in full compliance     You are not required to accept this License  since you have not  signed it  However  nothing else grants you permission to modify  or distribute the Program or its derivative works  These actions  are prohibited by law if you do not accept this License  Therefore   by modifying or distributing the Program  or any work based on  the Program   you indicate your acceptance of this License to do  so  and all its terms and conditions for copying  distributing or  modifying the Program or works based on it     Each time you redistribute the Program  or any work based on  the Program   the recipient automatically receives a license from  the original licensor to copy  distribute or modify the Program  subject to these terms and conditions  You may not impose  any further restrictions on the recipients    exercise of the rights  granted herein  You are not responsible for enforcing compliance  by third parties to this License     If  as a consequence of a court judgment or allegation of patent  infringement or for any other reason  not limited to patent  issues   Conditions are imposed on you  whether by court order   agreement or otherwise  that contradict the conditions of this  License  they do not excuse you from the conditions of this  License  If you cannot distribute so as to satisfy simultaneously  your obligations under this License and any other pertinent  obligations  then as a consequence you may not distribute the  Program at all  For exampl
142. reports   and  http   www unicode org cldr data   Unicode Data Files do not include  PDF online code charts under the directory    http   www unicode org Public   Software includes any source code  published in the Unicode Standard or under the directories    http   www unicode org Public   http   www unicode org reports   and  http   www unicode org cldr data      NOTICE TO USER  Carefully read the following legal agreement  BY  DOWNLOADING  INSTALLING  COPYING OR OTHERWISE USING  UNICODE INC  S DATA FILES  DATA FILES    AND OR SOFTWARE   SOFTWARE  YOU UNEQUIVOCALLY ACCEPT  AND AGREE TO  BE BOUND BY  ALL OF THE TERMS AND CONDITIONS OF THIS  AGREEMENT  IF YOU DO NOT AGREE  DO NOT DOWNLOAD   INSTALL  COPY  DISTRIBUTE OR USE THE DATA FILES OR  SOFTWARE     COPYRIGHT AND PERMISSION NOTICE    Copyright c 1991 2011 Unicode  Inc  All rights reserved  Distributed  under the Terms of Use in http   www unicode org copyright html     Permission is hereby granted  free of charge  to any person obtaining a  copy of the Unicode data files and any associated documentation  the  Data Files  or Unicode software and any associated documentation   the Software  to deal in the Data Files or Software without restriction   including without limitation the rights to use  copy  modify  merge  publish   distribute  and or sell copies of the Data Files or Software  and to permit  persons to whom the Data Files or Software are furnished to do so   provided that  a  the above copyright notice s  and th
143. ries that do not contain  metallic components in its assembly  The use of accessories that do  not satisfy these requirements may not comply with FCC RF exposure  requirements and should be avoided     FCC Radiation Exposure Statement   This equipment is compliance with SAR for general population   uncontrolled exposure limits in ANSI EEE C95 1 1999 and had been  tested in accordance with the measurement methods and procedures  specified in OET Bulletin 65 Supplement C  This equipment should   be installed and operated with minimum distance 2 5cm between the  radiator  amp  your body        This device complies with Industry Canada license exempt RSS  standard s   Operation is subject to the following two conditions   1   this device may not cause interference and  2  this device must accept  any interference  including interference that may cause undesired  operation of the device              Copyright    All other registered and unregistered trademarks are the property of    their respective owners     HOM    HIGH DEFINITION MULTIMEDIA INTERFACE    DOLBY   DIGITAL PLUS    S S     TruSurround XT       ENERGY STAR    Consumer Notice     The terms HDMI and HDMI High   Definition Multimedia Interface  and  the HDMI Logo are trademarks   or registered trademarks of HDMI  Licensing LLC in the United States and  other countries     Manufactured under license from  Dolby Laboratories  Dolby and the  double D symbol are trademarks of  Dolby Laboratories     TruSurround XT technolog
144. rmat     Refer to HDMI AV  16 9 Source  above if PC has HDMI Output     Photo Slide show JPEG files only    MP3 playback MP3 files only    MPEG1   mpg  mpeg   MPEG2  mpg  mpeg  vob   H 264  mp4    MPEG4 SP ASP  avi   MPEG4  mp4   WVC1  wmv     1  supporting video signals   4801 p  720p  10801 p 60Hz             Video playback       Component Video Input       Composite Video Input   shared Y terminal of Component 1  Video        3    HDMI Input supporting video signals   4801 p  720p  10801 p  24Hz 60Hz  HDMI ARC  HDMI 1 only   PC Input signal up to WXGA  1360 x 768     Audio L R Input 1  PC Input via VGA  HDMI and HDMI DVI   Analog Audio L R    2  1 terminal mainly for wireless LAN adapter  both terminals function as a USB input terminal    Wireless LAN Supporting wireless standards   IEEE 802 11 b g n  2 4GHz              USB          Ethernet port 1    1  supporting Dolby Digital  1  1 8 inches  3 5mm     Operating temperature a SP  a LITOTO EAO C     e Specifications are subject to change without prior notice        Digital Audio Output       Headphone Output       10 Warranty    54   English       LIMITED WARRANTY  ONE  1  YEAR    WARRANTY COVERAGE   This warranty obligation is limited to the terms as set forth  below     WHO IS COVERED    This product warranty is issued to the original purchaser or the  person receiving the product as a gift against defects in materials  and workmanship as based on the date of original purchase      Warranty Period     from an Authorize
145. rom the point at which playback was  stopped  Press OK to play from the beginning of the file     e Press OPTIONS to display the optional menu  then use A Y to  select the desired item           Not available   Displays if no subtitle is available     Subtitle Off   Sets subtitle to Off           Subtitle  Subtitle 1 8   2clects the desired subtitle if the Video file  contains them   l Nigtavaiabie The unit displays if no Audio language is  Audio available        language Audio 1 8   2  lects the desired Audio language if the Video  file contains them              Of The sound will not be output from the unit s  speakers   On The sound will be output from the unit s  TV speakers speakers   Speakers You can control Audio Output from your  EasyLink connected EasyLink Compliant Devices with       VOL     by using this unit s remote control        Selects the picture mode according to your preference   Auto picture    Vivid  Sports  Standard  Movie  Game  Internet video and  Power saver        Selects the sound mode according to your preference     Auto sound  Standard  Vivid  Sports  Movie  Music and News                    e The resume information will be kept even when the unit is Turned Off    e If you play another file while the previously viewed file is being resumed  the resume  information of the previously viewed file will be deleted    e The file or the folder in resume stop mode will be highlighted in gray on List or  Thumbnails    e TV speakers will be displayed only 
146. s a de facto  standard  lo achieve this  non free programs must be allowed to use the  library  A more frequent case is that a free library does the same job as  widely used non free libraries  In this case  there Is little to gain by limiting  the free library to free software only  so we use the Lesser General Public  License     In other cases  permission to use a particular library in non free programs  enables a greater number of people to use a large body of free software   For example  permission to use the GNU C Library in non free programs  enables many more people to use the whole GNU operating system  as  well as its variant  the GNU Linux operating system     Although the Lesser General Public License is Less protective of the users   freedom  it does ensure that the user of a program that is linked with the  Library has the freedom and the wherewithal to run that program using  a modified version of the Library     The precise terms and conditions for copying  distribution and modification  follow  Pay close attention to the difference between a    work based on  the library    and a    work that uses the library     The former contains code  derived from the library  whereas the latter must be combined with the  library in order to run     GNU LESSER GENERAL PUBLIC LICENSE    TERMS AND CONDITIONS FOR COPYING  DISTRIBUTION AND  MODIFICATION    O  This License Agreement applies to any software library or other  program which contains a notice placed by the copyrig
147. sable RC key forwarding from the Home  menu    This section describes how to enable or disable RC key forwarding for  a particular device     1 Press MENU EXIT on the remote control     Use A Y  lt P to select a device to enable or disable RC key  forwarding     2   3 Press OPTIONS on the remote control    4 Use AY to select Enable RC key forwarding or  Disable RC key forwarding  then press OK     e If RC key forwarding is set to off  Enable RC key forwarding  will be displayed  If RC key forwarding is set to on   Disable RC key forwarding will be displayed and  amp  will be  displayed at the top left of the device icons     Note       e This function is available only when your devices are connected to this unit  through HDMI cables and assigned to an HDMI port  HDMI 1 to HDMI 3  with  Add new devices in the Home menu              Philips Wireless MediaConnect   Available for 32PFL4907  amp  26PFL4907only   You can enjoy your TV as a PC monitor wirelessly using your home    network  Make sure you download the Philips Wireless MediaConnect  software and install tt on your PC before you perform the steps below     Install Philips Wireless MediaConnect    1 Display Setup using Home menu and use A Y to select Software   then press OK   2 Use A Y to select MediaConnect code  then press OK   e Write down the 12 digit code displayed on the screen  You will  need this to download MediaConnect software     3 Start your Internet browser on your PC and open  the Philips Wireless MediaC
148. same legal and economic    effect as the original provision and the remainder of this License  will remain in effect  This License shall be governed by and  construed In accordance with the laws of the United States and  the State of California as applied to agreements entered into and  to be performed entirely within California between California  residents  Any litigation relating to this License shall be subject to  the exclusive jurisdiction of the Federal Courts of the Northern  District of California  or  absent subject matter jurisdiction in such  courts  the courts of the State of California   with venue lying  exclusively in Santa Clara County  California  with the losing party  responsible for costs  including without limitation  court costs and  reasonable attorneys fees and expenses  The application of the  United Nations Convention on Contracts for the International  Sale of Goods is expressly excluded  Any law or regulation that  provides that the language of a contract shall be construed against  the drafter shall not apply to this License   Exhibit A  License Applicability  Except to the extent portions of this file are made  subject to an alternative license as permitted in the SGI Free Software  License B  Version 1 1  the    License     the contents of this file are subject  only to the provisions of the License  You may not use this file except in  compliance with the License  You may obtain a copy of the License at  Silicon Graphics  Inc   attn  Legal Ser
149. se     Slide the cover back into position     Note                Remote control function       AUTO OPTIONS  MODE FAV SLEEP    APP1 APP2       NETFLIX    SOURCE oe  6   EXIT NET TV    MENU       CH       FORMAT    2        2 asc 3 per    4 Gu 5 Jk 6 mno    7rors  8 tuv 9 wxyz    PREV  CH O o    PHILIPS    TELEVISION    O    Soe   o eo                                                         10 English        POWER ON STANDBY ON    Press to Turn the unit On and go into Standby mode    To completely Turn Off the unit  you must unplug the AC power  cord    FAV   Displays a list of all channels marked as favorite     Includes subchannels    SLEEP   Press to activate the sleep timer    COLOR buttons  green  yellow    Functionally useful for Net service    VUDU and COLOR button  blue    Starts up VUDU and functionally useful for Net service   SOURCE   Toggles to select connected devices    NET TV   Displays the Net TV menu    OK   Press to decide the command of setting when the Home menu is  displayed    A Y  lt P  NAVIGATION buttons    Press to move left   right  up down through the items    INFO   Displays information about the TV channel or accessory device   EasyLink buttons   Functionally useful for EasyLink  Net service and DLNA      lt   gt    Press to search backward or forward through the disc   Pil Press to start  pause or resume playback    E Press to stop the disc playback    o Press to start or stop video recording     0 9  NUMBER buttons   Press to select channels    
150. service or Browse USB mode     1 Press NET TV on the remote control and then use A V  lt P to  select Twitter     e Login screen will appear   2 Use A Y to select Username  then press OK   e Software keyboard will appear     Select each one of characters from the list   Delete the last character in the entry field   All clear Delete all characters in the entry field     Switch case and symbols   i Determine the input Username and or Password     Use A Y    gt    to input your Username and Password into the  entry fields  Select OK after you have filled in all the necessary  items in the entry field  then press OK        e Password can be skipped next time onwards once you have  selected Remember me when registering the user name     e Software keyboard will disappear   4 Use AV  lt P to select Start  then press OK     e The unit will now establish a connection with the Twitter server  and perform authentication     5 When the unit is logged in successfully  Twitter Home screen will  appear at the left and the timeline will appear at the bottom of the  TV screen     Note          e User name and password are case sensitive     e User name will not accept your e mail account  Use only your user name registered on  the Twitter server   e If you select Start with no user name  the unit logs in as    Public     In this case you can  display  Public timeline    and  Trends  only    e For questions regarding Twitter  please visit www twitter com       23 English    Guide to Twitter 
151. sy access to the AC power cord or  plug to disconnect the TV from the power    e Before you move the TV  disconnect attached cables to prevent  damage to connectors    e Be sure to unplug the AC power cord from the AC outlet before  moving or carrying the unit                    Regulatory notices    Do not place the unit on the furniture that is capable of being tilted  by a child and an adult leaning  pulling  standing or climbing on it   A falling unit can cause serious injury or even death     This apparatus should not be placed in a built in installation such as a  bookcase or rack unless proper ventilation is provided    Make sure to leave a space of 4 inches  10cm  or more around this  apparatus     Press    to Turn the unit On and go into Standby mode    To completely Turn Off the unit  you must unplug the AC power cord   Disconnect the AC plug to shut the unit off when trouble is found or  not in use  The AC plug shall remain readily available     Never use a gas duster on this TV   The gas trapped inside of this unit may cause ignition and explosion     CAUTION  Danger of explosion if battery is incorrectly replaced   Replace only with the same or equivalent type     WARNING  Batteries  battery pack or battery installed  shall not be  exposed to excessive heat such as sunshine  fire or the  like     WARNING  To prevent injury  this apparatus must be securely  attached to the furniture   wall in accordance with the  instructions  Tipping  shaking  or rocking the unit
152. t   Displays unregistered Net service icons  on My Apps list     o         Displays the order of pages  The current  page will be highlighted     Page guide    Press NET TV  then use A Y    gt  to select App Gallery     Use A Y  lt P to select the desired App in My Apps list  then press  OK     e You can also choose from Category menu  Use A Y  lt P to  select All  then use A Y OK to select the desired category    If you select Add  the selected App icon will be placed at the  end of My Apps list    If you select Add and move  the selected App icon will be  smaller and use A Y  lt P to the point you want to place  then  press OK    Even if you press BACK to cancel this function  the selected App  icon will be placed at the end of My Apps list     N      Information on Network Services    For detailed information on 3rd party Internet services  please visit the  service providers website     Netflix   http   www netflix com HowltWorks   Film Fresh   http   filmfresh roxionow com    VUDU   http   www vudu com product_overview html  Cloud TV   http   www activevideo com       Enjoying v Tuner    With this unit  you can enjoy video and Internet radio with v luner via  the Internet  ln order to watching video and listen to Internet radio  you  must connect this unit to the Internet     Video playback    After you set up the network connection  follow the procedure below  to watch the video     Guide to the player screen  e g   Recommendations       3vtuner Recommendations Favo  Ge
153. t  or BP to move between images     Watch videos using DLNA    a sama   me A a     Press A Y to select a file or a folder  e Press OPTIONS to display the optional menu  then use A Y to  select the desired item  2 Press OK or PIE to play the selected files     Switches to the next image in 10 seconds  e Press  lt 4 to fast backward search   e Press If to stop playback   Switches to the next Image in 15 seconds  Press  gt I to resume from the point at which playback was  No effect when switching images   which playback was stopped   Overlaps a next image on a current image  e Press CH   to play the next file   Wipe right   Pushes a current image out from left  e Press CH  to play the current file at the beginning   Press CH     twice within 5 seconds to play the previous file   ia al Wipe left   Pushes a current image out from right  Press OPTIONS to display the optional menu  then use A Y to  ransitions  Pushes a current image out from bottom  select the desired Item   The sound will not be output from the unit s    Off P  Wipe down   Pushes a current image out from top  speakers   i The sound will be output from the unit s  On  A next image comes into the center from out  TV speakers speakers   Box out   A next image goes to the out from center  Speakers You can control audio output from your      EasyLink connected EasyLink Compliant Devices with  po Displays an image at its original direction  VOL     by using this unit s remote control   IIS Rotates an image clockwise by 9
154. t the signal Output use IR Signal Check  m    p 52 If okay  then possible infrared sensor trouble   Aim the remote control directly at the infrared sensor window on the front of the unit    Reduce the distance to the unit    Re insert the batteries with their polarities       as indicated     When there is an infrared equipped device such as PC near this unit  it may interrupt the remote control signal of this unit  Move  the infrared equipped device away from this unrt  change the angle of the infrared sensor or Turn Off the infrared communication  function     How come the initial setup Make sure to complete the initial setup before the unit goes into Standby mode   appears every time   Turn On  this unit     Why can   not watch some RF Autoprogram must be completed when you set up the unit for the first time or move it to a location where previously unavallable  signal TV programs  channels are broadcast    Make sure Autoprogram has been completed  m    p 37   The selected channel may not be broadcasting     When Autoprogram is interrupted and not completed  some channels will not be received  Make sure to complete the  Autoprogram  m p 37    The selected channel cannot be viewed by the Child and ratings lock setting  u p 34    The unit requires some kind of antenna Input  An indoor antenna  Digital or VHF UHF   an external antenna  Digital or VHF UHF   or an RF coaxial cable from your wall cable satellite box needs to be plugged into the unit     How come there is no imag
155. tance  please contact Call Center     In order to update software via the Internet  you must connect the unit to the Internet  and set up necessary settings  Network settings assistant m    p 40 Network ue p 40    e Please do not unplug the AC power cord or Ethernet cable while executing the  Network update     e All settings will remain the same even if you update the software version     e The version of Net service will also be updated if newer version of Net service is  available when updating the firmware                    Automatically check for latest software    This function lets you know if the latest software is available while the  unit is connected to the Internet     1 Use A Y to select Automatically check for latest software  then  press OK     2 Use A Y to select the desired option  then press OK     Disable automatically check for latest software   A message will appear if there is the latest software on the  network server       Netflix deactivation    Displays the deactivation setting for Netflix     1 Use A Y to select Netflix deactivation  then press OK   2 Use A Y to select the desired option  then press OK     Deactivate the connection to Netflix   Activate the connection to Netflix        Netflix ESN    Displays the ESN information     1 Use A Y to select Netflix ESN  then press OK     e Displays the ESN  Electronic Serial Number  to get any services  from Netflix        VUDU deactivation    Displays the deactivation setting for VUDU        Use A Y to
156. tandard For normal TV viewing  Movi Deep picture and powerful sound settings  ovie E  for a cinematic experience  Game   Optimized for PCs and game consoles  Internet video Loe Optimized for low bitrate Internet video    Power saia Eco TV settings for low power  consumption        Music   Optimized for music playback    Controls picture tone and set the anchor s  Create and use lists of favorite channels    Personal    voice at a comfortable volume  You can create lists of your preferred TV channels so that you can find  those channels easily     Select a list of favorite channels    1 Press FAV           AUTO OPTIONS  MODE FAV       e Your lists of favorite channels are displayed   2 Use A Y to select the desired list  then press OK     Create or edit a list of favorite channels    1 Press FAV to display your lists of favorite channels   Use A Y to select the desired list  then press OK     2   3 Press OPTIONS to enter edit mode   e A list of channels is shown    4    Use A Y to select the desired channel  then press OK to add or  remove on the list of favorite channels    e  x  indicates that the channel is added    e    indicates that the channel is removed     D Press MENU EXIT to exit     25 English    Switch to one of the channels on a list    1 Press OK to display the last list that you selected     2 Use AY to select a channel  then press OK   e The TV switches to that channel     Note       e Press CH    to select channels in a list or press the NUMBER buttons to sel
157. ter functions  but there is no vacant port  use a hub    e Fora broadband router  use a router which supports 10BASE T  100BASE TX           e Do not connect your PC directly to the Ethernet port of this unit        English    Connecting the TV to the Internet using a wireless LAN       Broadband router    W       USB wireless LAN    adapter Ethernet cable       Network provisioning  equipment       Note          e After you made the wireless connection  set up necessary network settings   Network m p 40    e Use a Wireless LAN Access Point  AP   e g  wireless router  which supports IEEE  802 11 b g n   n is recommended for stable operation of the wireless network      e This unit does not support Ad hoc mode     e Other radio devices or obstacles may cause interference to the wireless network  connection        Digital Audio Output Connection    If you connect this unit to an external Digital Audio device  you can  enjoy multi channel Audio like 5 1ch Digital broadcasting sound    Use a Digital Audio coaxial cable to connect the unit to external Digital  Audio devices           Digital Audio coaxial cable IN  O uu O  El Digital home theater    amplifier    47    PC connection    HDMI connection  This unit can be connected to your PC that has a HDMI terminal  Use  an HDMI cable for this Digital connection     IN OUT       d rr O E          HDMI cable PC    HDMI DVI connection    This unit can be connected to your PC that has a DVI terminal  Use   an HDMI DVI conversion cable 
158. that supports all uncompressed  Digital Audio Video formats including  set top box  Blu ray  DVD recorder or Digital television  over a single cable     HDTV  High Definition TV   Ultimate Digital format that produces high resolution and high picture quality     Analog TV  NTSC     Acronym that stands for National Television Systems Committee and the name  of Analog broadcasting standards     off the air NTSC signals are no longer being sent by major broadcasting stations  in the USA     PIN code  A stored 4 digit number that allows access to parental control features   SAP  Secondary Audio Program     Second Audio channel delivered separately from main Audio channel  This Audio  channel is used as an alternate in bilingual broadcasting     SDTV  Standard Definition TV   Standard Digital format that is similar to the Analog TV  NTSC  picture quality   SRS TruSurround XT      Creates a truly immersive surround sound experience with rich bass and clear  dialog from only two speakers     572       Maintenance    Cabinet Cleaning    Wipe the front panel and other exterior surfaces of the unit with   a soft cloth    Never use a solvent or alcohol  Do not spray insecticide liquid near  the unit  Such chemicals may cause damage and discoloration to  the exposed surfaces     Panel Cleaning    Wipe the panel of the unit with a soft cloth  Before cleaning the panel   disconnect the AC power cord     Should your unit become inoperative  do not try to correct the  problem yourself  There
159. the author donor to decide if he or she is willing  to distribute software through any other system and a licensee  cannot impose that choice     This section is intended to make thoroughly clear what Is believed  to be a consequence of the rest of this License     12  If the distribution and or use of the Library is restricted in  certain countries either by patents or by copyrighted interfaces   the original copyright holder who places the Library under this  License may add an explicit geographical distribution limitation  excluding those countries  so that distribution is permitted only in  or among countries not thus excluded  In such case  this License  incorporates the limitation as if written in the body of this License     13  The Free Software Foundation may publish revised and or new  versions of the Lesser General Public License from time to time   Such new versions will be similar in spirit to the present version   but may differ in detail to address new problems or concerns     Each version is given a distinguishing version number If the Library  specifies a version number of this License which applies to it and     any later version     you have the option of following the terms  and conditions either of that version or of any later version  published by the Free Software Foundation  If the Library does  not specify a license version number  you may choose any version  ever published by the Free Software Foundation     14  If you wish to incorporate parts of th
160. the software  and  2   offer you this license which gives you legal permission to copy  distribute  and or modifythe software     Also  for each author s protection and ours  we want to make certain that  everyone understands that there is no warranty for this free software  If  the software is modified by someone else and passed on  we want Its  recipients to know that what they have is not the original  so that any  problems introduced by others will not reflect on the original authors     reputations     Finally  any free program is threatened constantly by software patents   We wish to avoid the danger that redistributors of a free program  will individually obtain patent licenses  in effect making the program  proprietary To prevent this  we have made it clear that any patent must  be licensed for everyone s free use or not licensed at all     The precise terms and conditions for copying  distribution and  modification follow     TERMS AND CONDITIONS FOR COPYING  DISTRIBUTION AND  MODIFICATION    O  This License applies to any program or other work which contains  a notice placed by the copyright holder saying it may be distributed  under the terms of this General Public License  The    Program      below  refers to any such program or work  and a  work based  on the Program  means either the Program or any derivative  work under copyright law  that is to say  a work containing the  Program or a portion of it  either verbatim or with modifications  and or translated into
161. this software for any  purpose with or without fee is hereby granted  provided that the above  copyright notice and this permission notice appear in all copies     THE SOFTWARE IS PROVIDED    AS IS   WITHOUT WARRANTY  OF ANY KIND  EXPRESS OR IMPLIED  INCLUDING BUT NOT  LIMITED TO THE WARRANTIES OF MERCHANTABILITY  FITNESS  FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF  THIRD PARTY RIGHTS  IN NO EVENT SHALL THE AUTHORS OR  COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM  DAMAGES OR  OTHER LIABILITY  WHETHER IN AN ACTION OF CONTRACT  TORT  OR OTHERWISE  ARISING FROM  OUT OF OR IN CONNECTION  WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE  SOFTWARE     Except as contained in this notice  the name of a copyright holder shall  not be used in advertising or otherwise to promote the sale  use or  other dealings in this Software without prior written authorization of the  copyright holder     gSOAP    Part of the software embedded in this product is gsOAP software     Portions created by gSOAP are Copyright  C  2001 2009 Robert A  van  Engelen  Genivia inc  All Rights Reserved     THE SOFTWARE IN THIS PRODUCT WAS IN PART PROVIDED  BY GENIVIA INC AND ANY EXPRESS OR IMPLIED WARRANTIES   INCLUDING  BUT NOT LIMITED TO  THE IMPLIED WARRANTIES  OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  PURPOSE ARE DISCLAIMED  IN NO EVENT SHALL THE AUTHOR  BE LIABLE FOR ANY DIRECT  INDIRECT  INCIDENTAL  SPECIAL   EXEMPLARY  OR CONSEQUENTIAL DAMAGES  INCLUDING   BUT NOT LIMITED TO  PROCUREMENT OF S
162. tice           Add to favorite list    You can add your favorite stations to Favorites in the category list  To  add your favorite stations  follow the procedure below     1 Follow steps 1 to 3 in Internet radio playback  im p 21    2 Use A Y to select the station you want to add to Favorites  then  press COLOR button  yellow      e The selected station is added to Favorites folder   e Confirmation message will appear     e If you select a folder  use A W to select the desired station in the  next hierarchy  then press COLOR button  yellow      3 Press OK     e You can also add your favorite stations to Favorites on your PC  To add your favorite  stations on your PC  visit http   go2service vtuner com pe  and create a vluner account  with the access code  which you can check from the category list  Internet radio  playback me p 21      You can change folder names or order of lists in your v Tuner page on the Internet     e My_Favorite folder will appear after you add a station to Favorites on this unit   Your  favorite station will also be added to My_Favorite folder                    Remove from favorite list    1 Follow step 1 in Internet radio playback  m    p 21  2 Use A Y to select Favorites  then press OK     3 Use A Y to select the station you want to remove from Favorites   then press COLOR button  yellow      e Confirmation message will appear  4 Use 4   to select Yes  then press OK   e The selected station is removed from Favorites folder     Add stations on the v 
163. tion 7  to enable image enhancement  HDTV features to improve picture  quality    to adjust the horizontal vertical position  clock and  Auto adjustment l  phase of the PC screen automatically    ero  Camara    to decrease setting value   to increase setting value  Horizontal shift   to move PC screen left  to move PC screen right  Vertical shift to move PC screen down   to move PC screen up    Continued on next page        You can set a particular about picture qua    Color alignment    Noise reduction       Black stretch   Dynamic contrast  Gamma   MPEG artifact reduction  Color enhancement    Advanced picture Custom color managem    to set the    Mode       Personal  Cool  Normal and Warm  When you adjust the following  settings  Personal will be set  automatically        lity in Advanced picture     MOS   Minimum   On   Of    HEED  OF  Off   Red    Custom  color  management    color temperature to  Film mode    Note    31 English    to select the desired setting  then press OK   Red  Yellow  Green  Cyan  Blue and Magenta     Tint    Brightness    to set film mode to Off  Auo to optimize the picture recorded by  the original film    Cursor  lt     to rotate only  selected color  tint in clockwise  direction    to decrease color  with only selected  color    to decrease  brightness with  only selected  color       to rotate   only selected  color tint in  counterclockwise  direction    to increase color  with only selected  color    to increase  brightness with  only select
164. ture     Cannot rent or buy movies   TV  episodes on VUDU     The picture quality of streaming  movie  Netflix  Film Fresh or  VUDU  is poor     Streaming movie  Netflix    Film Fresh or VUDU  often  stops or starts buffering during  playback     Cannot connect to the network  while my PC is connected to the  network     Folder or files stored on DLNA  home media server are not  displayed in the file list or cannot  be played back     Cannot use Film Fresh feature     Cannot use Pandora feature     The audio of Internet radio  station interrupted     Cannot play back Internet radio     The quality of the Internet radio  audio is poor or noise occurs  during playback of Internet  station     Cannot get into the   PC s screen even the   Philips Wireless MediaConnect is  launched       have a 1 8GHz CPU but  MediaConnect does not work  on my PC     Note    e Check the installation location of the TV and wireless router  access point   Signal quality may be affected for the following reasons         Interference of other wireless devices  microwaves  fluorescent lights  etc   are placed nearby       There are floors or walls between the wireless router and TV       If the problems continue even after checking the above  try making a wired LAN connection     Check if the Wireless LAN Access Point  AP   e g  wireless router  is oriented properly or not placed too close between them   Once you have activated the wireless connection please walt 30 seconds for the connection to be est
165. ual  Attaching the base  Managing cables  Installing the remote control batteries  Remote control function  Control panel  Terminals  Connecting the antenna or the cable  Plugging in the AC power cord  Initial setup    4 Use your TV    Switching on your TV and putting it in Standby mode  Adjusting volume   Switching channels   Watching channels from an external device   Access the Home menu   Philips Wireless MediaConnect   View photos  play music and watch videos using DLNA  Net TV   Enjoying v Tuner   Pandora   operations   Using Twitter   Using auto mode   Create and use lists of favorite channels   Sleep timer   Changing picture format   TV screen information   USB    5 Use more of your TV  Picture  Sound  Features  Caption settings  Sleeptimer  Child and ratings lock  Change PIN  Installation  Language  Channel installation  Preferences  Use Philips EasyLink  Network  Return your settings to default values    N NNN     O o 00 00 o 00    11  11  2  12  18    15  a  15  15  16  16  17  1z  7  20  22  23  25  has  295  26  26  ap    29  30  aL  33  33  34  a  36  36  36  34  38  38  40  43    2    Software 43  Checking your current software version 43  Preparing for the software upgrade 43  Upgrading the software 44  Automatically check for latest software ae  Netflix deactivation a   Netflix ESN 44  VUDU deactivation 44  YouTube deactivation 44  6 Connecting devices 45  Selecting your connection quality 45  Connecting your devices ao  7 Useful tips 49  FAQ 49  Troubleshoot
166. ue      e Video service may not be fully available with narrowband Internet connection   e g   56k modem  When watching video  use broadband Internet connection   For details   contact your Internet service provider     e Depending on the bit rate of a station or the network environment  it may take a while  to complete loading the station or playback may not be available     e The streaming video may be interrupted during playback  when the vTuner server is busy   e Some stations cannot be displayed in the list  depending on the network environment   e Ifthe loading time of a station exceeds 3 minutes  the loading will be canceled     e The order of station episode in the list depends on the information from v Tuner  server and may change without notice                    Add to Favorites    You can add your favorite stations to Favorites in the category tab  lo  add your favorite stations  follow the procedure below     1 Follow steps 1 to 2 in Video playback  im p 20  2 Use A Y 4  to select the station you want to add to Favorites   then press COLOR button  yellow      e The selected station is added to the station list in Favorites   e Confirmation message will appear    e Press COLOR button  yellow  to add your favorite station in  Favorites while the desired episode is selected in the episode list  or the episode is being played back     3 Press OK     Remove from Favorites    1 Follow step 1 in Video playback  im p 20  2 Use  lt P to select Favorites in the category ta
167. vices  1600 Amphitheatre Parkway   Mountain View  CA 94043 1351  or at  http   oss sgi com projects FreeB    Note that  as provided in the License  the Software is distributed on  an    AS IS    basis  with ALL EXPRESS AND IMPLIED WARRANTIES  AND CONDITIONS   DISCLAIMED  INCLUDING  WITHOUT  LIMITATION  ANY IMPLIED WARRANTIES AND CONDITIONS  OF MERCHANTABILITY  SATISFACTORY QUALITY  FITNESS FOR A  PARTICULAR PURPOSE  AND NON INFRINGEMENT     Original Code  The Original Code is   name of software  version number  and release date   developed by Silicon Graphics  lnc  The Original Code is  Copyright  c   dates of first publication  as appearing in the Notice in the  Original Code  Silicon Graphics  Inc  Copyright in any portions created by  third parties is as indicated elsewhere herein  All Rights Reserved     Additional Notice Provisions   such additional provisions  if any  as appear  in the Notice in the Original Code under the heading    Additional Notice  Provisions         xil    PHILIPS    P amp F USA  Inc   PO Box 2248  Alpharetta  GA 30023 2248    P amp F Mexicana  S A  de C V   Av  La Palma No  6  Col  San Fernando La Herradura   Huixquilucan Edo  de M  xico C P  52787    Philips and Philips Shield are used under license of    Koninklijke Philips Electronics N V     A27FSUH A27A5UH A2776UT  Kk KKK    
168. video  MPEG  files stored on a USB  Memory Stick can be played back on this unit     e Digital Audio Output  e Headphone Audio Output       8 English       Supplied accessories                                                    User Manual Quick Start guide Registration card  A  1  Quick IMPORTANT  Start      Box inserts  ae  Remote Control and TV base and screws    batteries  AAA  1 5V x 2  A    Screws packed with this unit                                Model Quantity Size  32PFL4907 3  26PFL4907 M4 x 14  22PFL490  2  Cable management tie USB wireless LAN  adapter    El        e If you lose the screws  please purchase the above mentioned Phillips head screws at  your local store     Manual     When using a universal remote control to operate this unit     Refer to the instruction book accompanying your remote control for more details   e We do not guarantee 100  interoperability with all universal remote controls        e If you need to replace these accessories  please refer to the part name or No  with the  illustrations and call our toll free customer support line found on the cover of this User    e Make sure the component code on your universal remote control is set to our brand              Symbols used in this User Manual    The following is the description for the symbols used in this User  Manual  Description refers to     Digital TV operation    e If neither symbol appears  the operation is applicable to both        Attaching the base    You must attach the base t
169. wall jack or a standard TV antenna     To set up a TV signal from a cable TV  box or satellite TV receiver              4 Use A Y to select Antenna for TV channels or Cable for CATV  channels  then press OK           Make sure that you have   attached your antenna or cable Antenna  signal into the jack on the back   of your TV labeled    ANTENNA  IN        Now select either Antenna or    Cable  using up down key of the  remote control  Once you have  made you selection  press the  OK button to proceed                  When Antenna is selected  the TV detects antenna signals  lt searches  for DTV and Analog TV channels available in your area        When Cable is selected  the TV detects signals supplied by cable  It  searches for DIV  Analog TV and Cable channels available in your  area     e Autoprogram will begin           15       System searching  Please wait       Digital channels found  0  Analog channels found  0    k     Auto programming may take more than 20 minutes to  complete  Digital channels will take longer than Analog  to find and program  Please wait until you see   the Auto Programming complete message              5 After the channel installation is completed  Network setup screen  will appear  Use A Y to select Wireless c or Wired  then press OK        This TV can be connected to  your home network  Wireless  Select your connection type              Wireless If you have a router with WPS function  select  Wireless to connect to the Internet     Wired If you
170. when Master EasyLink is set to On   EasyLink m    p 39             English    29 English    5 Use more of you r TV 3 Use A Y to select the desired menu and an item  then press OK  or use A Y  lt P to determine the setting     i Setti istant  This section describes the overview of the Setup menu displayed when Howe    es AD Start now  you press MENU EXIT and use A Y  lt  gt  to select Setup    Sound Auto picture Personal  The Setup menu consists of the function setting items below  MA Backlight OE    1 Press MENU EXIT to display Home menu  Installation Contrast TTTTTTTTTTTTT    See Brightness   STEELE    Tint AA IN    Sharpness PEETT TEE EETTT    NETELIX  SOURCE       Zi       2 Use A Y 4    to select Setup  then press OK     O    4  gt  p 30    Watch TV Browse USB Browse PC Adjusting the picture mode or customize the picture    quality as your preference         Net TV         Net TV Add new devices g  Sound nm   p 32    Adjusting the sound mode  equalizer and some other  sound functions     p33    Adjusting the Closed Caption  parental guide and some  other useful functions     Installation IE p 36    You can choose language  scan the channels available in  your area or make the Network settings     2 p43    You can check the current software version  update the    software or deactivate the setting for Netflix and VUDU      4 When the setting Is completed  press MENU EXIT or BACK to  exit     Picture       Before you begin   You must set Home in Location  m      p 38    Oth
171. y is  incorporated under license from SRS  Labs  Inc    SRS TruSurround XT   creates a truly  immersive surround sound experience  with rich bass and clear dialog from  only two speakers     ENERGY STAR   is a joint program   of the US  Environmental Protection  Agency and the U S  Department of  Energy helping us all save money and  protect the environment through  energy efficient products and practices     This TV has been set to maximize energy efficiency while delivering the  best possible picture using the factory installed home mode settings   Changing or enabling other features in this TV  e g  brightened  backlighting  will possibly increase energy consumption beyond the  original ENERGY STAR   qualified limits     Salina    NETFLIX  FILM FRESH    VJ  You    ClouaTw             PANDORA    DLNA    the DLNA Logo and DLNA  CERTIFIEDO are trademarks  service  marks  or certification marks of the  Digital Living Network Alliance     Netflix and the Netflix logo are  trademarks or registered trademarks  of Netflix  Inc     Film Fresh and the Film Fresh logo are    registered trademarks of Film Fresh Inc     VUDU  is a trademark of VUDU  Inc     YouTube and the YouTube logo are  trademarks of Google Inc     CloudTV     Cloud V    by  ActiveVideo    technology provided  under license from ActiveVideo  Networks  Inc  U S  and Foreign Patents    apply  CloudTV    and the    CloudTVTM       logo are proprietary trademarks of  ActiveVideo Networks  Inc   PANDORA  the PANDORA log
172. ys a picture in its original size     TV screen information       You can display the currently selected channel or other information  such as the aspect ratio on the TV screen     In the Digital mode  the detailed broadcasting information for the current  off the air channel such as program title and program guides are displayed     1 Press INFO     11 1 KABC    A Day of Memories    Resolution 1080i  Picture format Wide screen  Sound mode Stereo  Audio language English   CC presence   Rating    Sleeptimer       broadcast station    channel number  Input mode  Switching channels mp p 15  Watching channels from an external device mm p16  program title  for DTV only     program s image aspect ratio   Changing picture format mp p 26  audio language  DIT V  audio mode  Analog TV    Sound m    p 32    CC  not available if Closed Caption is set to Off   Caption settings mp   p 33    O O     a O      child lock rating  Child and ratings lock   mp p 34          remaining time of sleeptimer  Sleeptimer m    p 34    2 Press INFO to hide the information     Note       e While the program guide is displayed  the Closed Caption function is interrupted   e The information display will automatically disappear in 5 seconds              USB    Your TV is fitted with a USB connection that enables you to view  photos  listen to music or watch MPEG files stored on a USB Memory  Stick     1 Connect the USB Memory Stick to the USB terminal on the side of  your TV     2 Press MENU EXIT and use A Y 
    
Download Pdf Manuals
 
 
    
Related Search
    
Related Contents
KING-METER KM5S–LCD KM KM  John Deere and T165 User's Manual  INSTALLATION - Kuryakyn USA  Manual PDF  CATÁLOGO IMAGINA 2013    Copyright © All rights reserved. 
   Failed to retrieve file