Samsung SCV-3080
Contents
1. White Balance ATW OUTDOOR INDOOR MANUAL AWC 1 700 K 11 000 K Backlight Compensation OFF USER BLC HLC SSDR WDR Wide Dynamic Range x128 52dB X160 54dB 3D Noise Filter SSNRIII ON Level adjustable Day amp Night AUTO EXTERN COLOR B W Profile BASIC DAY NIGHT BACKLIGHT ITS INDOOR USER Digital Zoom OFF ON x1 x16 Sharpness OFF ON Level adjustable Camera Title OFF ON Display 15 Characters SYNC INTERNAL LINE LOCK VPS Virtual Progressive OFF ON Scan INTELLIGENCE DETECTION TRACKING FIXED MOVED ALARM OUT ETC PIP REVERSE Privacy Masking OFF ON 12 Programmable zones Polygonal type Digital Image Stabilization DIS OFF ON Coaxial Communication Pelco Coaxitron Operating Temperature Humidity 50 C 50 C Less Than 90 RH Weather Proof 66 Dimension 0160 x 134 5 H Weight 1 26 Kg The specification for this product may change without prior notice for product improvement DECLARATION OF CONFORMITY Application of Council Directive s 2004 108 EC Manufacturer s Name SAMSUNG TECHWIN CO LTD Manufacturer s Address SAMSUNG TECHWIN CO LTD 42 SUNGJU DONG CHANGWON CITY KYUNGNAM KOREA 641 716 European Representative Name European Representative Address Equipment Type Environ2. SAMSUNG TECHWIN High Resolution Vandal Dome Camera User Manual SCV 3080 High Resolution Vandal Dome Camera User Manual Copyright 2009 Samsung Techwin Ltd All rights reserved Trademark SAMSUNG TECHWIN g is the registered logo of Samsung Techwin Co Ltd The name of this product is the registered trademark of Samsung Techwin Co Ltd Other trademarks mentioned in this manual are the registered trademark of their respective company Restriction Samsung Techwin Co Ltd shall reserve the copyright of this document Under no circumstances this document shall be reproduced distributed or changed partially or wholly without formal authorization of Samsung Techwin Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document but no formal guarantee shall be provided Use of this document and the subsequent results shall be entirely on the user s own responsibility Samsung Techwin reserves the right to change the contents of this document without prior notice Warranty Samsung Techwin Co Ltd shall reserve the copyright of this document Under no circumstances this document shall be reproduced distributed or changed partially or wholly without formal authorization of Samsung Techwin Before operating the camera confirm the camera model and correct input power voltage To help you understand this manual thoroughly we ll introduce our model des
3. Color B W BW gt Color Early 2 5 lux 5 lux Late 1 lux 7 lux The day night switching point of the camera can be adjusted EXTERN This mode allows you to apply a desired filter to external signals O COLOR The picture is always displayed in color BM The picture is always displayed in black and white You can turn on or off the burst signal on B W mode When in the EXPOSURE menu is OFF mode operates as selecting COLOR mode and AUTO mode cannot be selected Be sure to connect the Day amp Night input terminal to GND when using an external input 1 When the SETUP menu screen is displayed select PROFILE by using the Function Setup switch so that the arrow indicates PROFILE gt 7 PROFILE BASIC 2 Select a desired mode using the Function Setup switch according to the picture display you want C BASIC The most common environment is set to meet C DAY NIGHT It will be set automatically so it optimizes to the day or night conditions respectively C BACKLIGHT It will be set automatically so you can distinguish the object from the background in a severe backlighting scene SITS It will be set automatically so you can easily check the traffic conditions INDOOR It will be set automatically to help you take a picture in a regular indoor lighting condition USER Automatically configures the camera to your custom settin
4. 2 56 50Hz PAL frequency you can synchronize the output phase of multiple cameras using the power synchronization function Line Lock without using synchronization signal generator INT Internal Synchronization Type L L Power Synchronization Type Line lock Press the Function Setup switch You can select a desired phase from 0 to 359 when select phase Notes When using AC power at 60Hz NTSC 50Hz PAL frequency you can use the L L type synchronization When the power is DC 12V the SYNC menu is fixed to the INT mode INTELLIGENCE Commands the camera to motion detect and trace an object bi MOTION MOTION Select motion types to detect OFF Not being used DETECTION Since the camera detects motion without any additional external sensor you can monitor activity more efficient TRACKING Commands the camera to detect and trace a moving object gt FENCE You can select up to 4 FENCES gt MODE Determines whether to use the fence selected in the FENCE gt TYPE Two types line and area of fences are available lt COUNT Displays the number of times that an object enters or leaves a fenced area gt FILL Fill or remove color from the FENCE POSITION Defines the position and detection direction of a line or fenced area 1 LINE FENCE SEL POS Selects a position from POS1 POS2 XPOS Y POS Adjust the size and position of the selected lin
5. If you enter a title the title will appear on the monitor 1 If the SPECIAL menu screen is displayed use the Function Setup switch so that the arrow indicates CAM TITLE 2 Set it to ON by using the Function Setup switch 3 Press the Function Setup switch 4 Use the Function Setup switch to move to a desired letter and select the letter by pressing the Function Setup switch Repeat this to enter multiple letters You can enter up to 15 letters 5 Enter a title move the cursor to POS and press the Function Setup switch The entered title appears on the screen Select the position to display the title on the screen by using the Function Setup switch and press the Function Setup switch When the position is determined select END and press the Function Setup switch to return to the SPECIAL menu E FRONT DOOR Notes When the CAM TITLE menu is OFF no title will be displayed the monitor screen even if you enter one English and Numbers are available in this mode If you move the cursor to CLR and press the Function Setup switch all the letters are deleted To edit a letter change the cursor to the bottom left arrow and press the Function Setup switch Move the cursor over the letter to be edited move the cursor to the letter to be inserted and then press the Function Setup switch SYNC In areas where the supply is at 60
6. SHARPNESS and PRIVACY functions are Ca Functions P Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment and is taking a number of steps to provide customers with more environment friendly products The Eco mark represents eco Samsung Techwin s will to create environment friendly products and RoHS compliant indicates that the product satisfies the EU RoHS Directive This information is provided to ensure your safety and to prevent any losses financial or otherwise Please read it carefully and use the product accordingly For product inquiries please contact the retail shop where you bought the camera The use of equipment such as an aerial ladder while providing after sales service shall be at your expense Separate the power plug during a thunder storm This product is support equipment for surveillance systems Therefore we can t compensate for material loss and or personal injuries by robbery fire natural disaster or other such events Janoring this information may A Ignoring this information may patera loss andor result in material loss and or a serious personal injuries including slight injuries death O Indicates Never Allowed Indicates Disassembling Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in the European Union and other Euro
7. a Seas i leal m lel we 4 Input Voltage AC 24V DC 12V Built in Fan amp Heater AC 24V Power Consumption Heater off 3 8W Max Heater on 8 0W Max Imaging Device 1 3 inch Color Double Density CCD Total Pixels 811 H x 508 V 768 H x 494 V 795 H x 596 V 752 H x 582 V Effective Pixels Scanning System 2 1 Interlace Progressive Synchronization Internal Line Lock 15 734KHz 15 625KHz V 59 94Hz V 50 00Hz Horizontal Resolution COLOR 600TVL B W 700 TVL Min Illumination COLOR 0 3 Lux 60IRE F1 2 0 0006 Lux SENS UP X512 B W 0 01 Lux S0IRE F1 2 0 00002Lux SENS UP X512 Video Output CVBS 1 0Vp p 7502 composite Zoom Ratio 3 9 Manual Focus Length 2 8 11mm F1 2 Angular Field of View H 102 0 Wide 28 0 Tele V 73 0 Wide 21 0 Tele Pan Tilt Rotate Range Electronic Shutter Speed 05 65 0 90 0 356 160 1 120k sec 1 50 1 1 20k sec Shutter Mode ESC MANUAL A FLK FIXED NTSC English Korean Japanese Spanish French Portuguese Taiwanese 5 PAL English Chinese German Italian French Spanish Russian Czech i Polish Romanian Serbian Swedish Danish Turkish Portuguese Gain Control OFF LOW HIGH SENS UP frame Integration OFF Auto Selectable x2 x512
8. B HE e BASIC eDAYNIGHT eBACKLIGHT errs INDOOR USER IMAGEADJ CAMTITLE SYNC SPECIAL INTELLIGENCE PRIVACY DIS e LANGUAGE RETURN SAVE NOT SAVE e RESET Use the Function Setup switch within the camera Function Setup switch 1 Press the Function Setup switch Main SETUP menu is displayed on the monitor screen Select the function using 1 LEMS Change the status using the Function Setup switch the Function Setup switch 2 Select a desired function using the Function Setup switch Place the cursor over a desired item 3 Set up a selected item by using the Function Setup switch 4 To finish the setting select EXIT and press the Function Setup switch Notes e An item with the icon also has sub menus To select a sub menu select an item with the icon and press the Function Setup switch e An item with the icon is unavailable due to function settings Using this function you can control the screen brightness 1 When the SETUP menu screen is displayed select LENS by using the Function Setup switch so that the arrow indicates LENS 2 The Lens mode has sub menu site as listed below BRIGHTNESS Adjusts the video brightness FOCUS ADJ To adjust the lens focus correctly you must activate the Focus Settings mode To activate the Focus Settings mode adjust the lens focus and then deactivate the settings mode You can adjust the
9. D Output Terminal of the camera when an object s movement matches a custom Motion Type DETECT AREA Defines the Motion Detection area MASK AREA Specify a detection exception area to mask Select a mask area number and specify the size and position gt AREA You can select up to 4 areas MODE Determines whether to use the area selected in the AREA TOP BOTTOM LEFT RIGHT Adjust the size and position of the selected area RETURN Select this to save the MASK AREA menu settings and return to the INTELLIGENCE menu SENSITIVITY Set the sensitivity of the motion detection When adjusting the sensitivity note that the lower the level means the higher sensitivity DETECT SIZE Selects an object size to detect on the screen When adjusting the detection size note that the higher the level means the bigger detection size RETURN Select this to save the INTELLIGENCE menu settings and return to the SPECIAL menu PRIVACY Mask an area you want to hide on the screen gt AREAL 1 When the SPECIAL menu screen is displayed press the Function Setup switch so that the arrow indicates PRIVACY 2 Set up the mode using the Function Setup switch AREA You can select up to 12 PRIVACY areas MODE Determines whether to use the area selected in the AREA MASK COLOR Determine area color You can select Green Red Blue Black White Gray TRANSPARENCY Adds or remo
10. L Select this to fine tune White Balance manually Set White Balance first by using the ATW or AWC mode After that switch to MANUAL mode fine tune the White Balance and the Function Setup switch para To find the optimal luminance level for the current environment point the camera towards a sheet of white paper and press the Function Setup switch If the environment changes readjust it Notes White Balance may not work properly under the following conditions In this case select the OUTDOOR mode When the color temperature of the environment surrounding the subject is out of the control range e g clear sky or sunset When the ambient illumination of the subject is dim Ifthe camera is directed towards a fluorescent light or is installed a place where illumination changes dramatically the White Balance operation may become unstable The SCV 3080 is designed so that it delivers a distinctive subject and background at the same time even when the subject is in backlight by adopting a function of the proprietary SV V DSP chip 1 When the SETUP menu screen is displayed select BACKLIGHT by using the Function Setup switch so that the arrow indicates BACKLIGHT p gt 4 BACKLIGHT 2 Select a desired mode using the Function Setup switch depending on the camera purpose OFF Not being used BLC Enables a user to select a desired area on a picture and view that are
11. LIGHT ITS INDOOR USER 5247 PB pp Displays a full size image along with the thumbnail FAN y A Paa adopting a proprietary SV V DSP chip the camera a ivers clear high quality pictures even when the 2 scene is backlight by increasing exposure in dark areas while decreasing it in bright areas corr NL with clear details results m 2 6 DE Progressive Scan Communication 2 Adopting Samsung s unique development the VPS Hi Virtual Progressive Scan enhances the sharpness of are supported moving subject s outline The VPS enables elective output in progressive mode using the existing interlaced input and effectively enhances the sharpness of captured pictures from video and still 5 images The function effectively removes blurred vum outline problems resulting in excellent road Cosi 14 monitoring and improved license plate recognition A A The camera s OSD is complimented by 18 languages NTSC English Korean Japanese Spanish E NG French Portuguese Taiwanese 3 ni gt Digital Image Stabilizer PAL English Chinese German Italian French Spanish Russian Czech Polish Romanian The DIS function compensates for any camera Serbian Swedish Danish Turkish Movement to produce more stable pictures Portuguese ligh Light Compensation SENS UP REVERSE M
12. NC cable to the camera The image on the screen is dim gt Is lens stained with dirt Clean your lens with soft clean cloth Set the monitor or DVR to the proper condition gt If the camera is exposed to very strong light change the camera position The image on the screen is dark gt Adjust the contrast feature of the monitor or DVR gt If you have an intermediate device set the 750 Hi z properly The camera is not working properly and the surface of the camera is hot Check that you have properly connected the camera to an appropriate power source The DAY NIGHT menu does not work Check that AGC of EXPOSURE SETUP menu is OFF The SENS UP function does not work gt Check that AGC of EXPOSURE SETUP menu is OFF Check that SHUTTER of EXPOSURE SETUP menu is A FLK or MANUAL The INTELLIGENCE function does not work gt Check that INTELLIGENCE of menu is OFF Color is not correct gt Check the setting of WHITE BAL SETUP menu The screen flickers continually Ensure the camera is not pointing towards the sun When coaxial communication is not available Make sure that the camera and monitor are installed within the recommended distance Use the video amplifier equivalent to coaxitron if the recommended installation distance is exceeded The camera is out of focus gt Check that you have properly adjusted the zoom focus adjustment lever of lens
13. a more clearly LEVEL Adjusts the brightness level of a monitoring area TOP BOTTOM LEFT RIGHT Adjust the area to be enhanced O HLC High Light Compensation If the scene contains extremely bright light areas such as from car headlight the light can mask out much of the on screen detail LEVEL Adjusts the brightness level of a monitoring area LIMIT Enable to change the operating condition MASK COLOR TONE Change the color brightness of the masking area Black Red Blue Cyan Magenta TOP BOTTOM LEFT RIGHT Adjust the area to be enhanced SSDR Samsung Super Dynamic Range SSDR illuminates darker areas of an image while retaining the same light level for brighter areas to even out the overall brightness of images with high contrast between bright and dark areas Use the Function Setup switch to change the SSDR level in the sub menu according to the contrast between bright and dark areas a SSDR ON SSDR OFF When there are both bright and dark areas at the same time this mode makes both areas distinctive WDR OFF Select WDR to adjust the WDR LIMIT and LEVEL LIMIT Adjust the WDR Sensitivity by selecting LOW MIDDLE or HIGH LEVEL Adjust the WDR Brightness by controlling the bar from 1 to 100 MODE Indoor and outdoor backlight conditions are appropriately selected ANTI ROLLING Rolling caused around a fluorescent lamp is improv
14. cription W SCV 3080 SERIES NTSC MODELS PAL MODELS SCV 3080N SCV 3080P MODEL DESCRIPTION SCV 3080X E SIGNAL SYSTEM e SIGNAL SYSTEM N NTSC MODEL P PAL MODEL CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL to constitute a risk of electric shock to persons The lightning flash with an arrowhead symbol within an equilateral triangle A is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance INFORMATION This equipment has been tested and found to comply with limits for a Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harm
15. e fence DIRECTION DIR1 Detects objects moving left to right on the fence line DIR2 Detects objects moving right to left on the fence line DIR1 2 Detects all objects moving crosswise on the fence line RETURN Select this to save the POSITION menu settings and return to the TRACKING menu 2 AREA FENCE SEL POS Selects a position from POS1 054 XPOS Y POS Adjust the size and position of the selected area fence DIRECTION IN Detects objects entering the fenced area OUT Detects objects exiting the fenced area IN OUT Detects all objects entering and exiting the fenced area RETURN Select this to save the POSITION menu settings and return to the TRACKING menu gt RETURN Select this to save the TRACKING menu settings and return to the INTELLIGENCE menu LINE FENCE AREA FENCE 1 SEL POS B err pos 2 X POS x 3 Y POS 3 Y Pos 4 DIRECTION 4 DIRECTION 5 RETURNe 5 RETURN 3 p FIXED MOVED Detects an object that emerges or disappears from the screen or stays onscreen without movement Notes eA detection FIXED MOVED error may occur if multiple motions occur continuously in random directions a fixed object moves in one position continuously asecond object screens the first moving object DETECT BOX Outlines an object on the screen in a box when its movement matches a custom Motion Type ALARM OUT Releases a signal from the M
16. ed 3 Select a desired mode using the Function Setup switch BLC Adjust the area to be enhanced HLC Enable the user to change the level then adjust the level limit mask color tone and area SSDR Enable the user to change the WDR Enable the user to change the level limit and level Press SET to Return 9 Notes gt Because there can be a difference in the effectiveness of HLC according to the amount of light area in the screen optimize the installation angle for the best HLC performance When dark the HLC is only activated when a bright light exceeding a specific size In NIGHT ONLY mode The HLC is not activated in day light or when bright light is not present at night In NIGHT ONLY mode e When using the WDR function the shutter is only available with the fixed mode Since the performance of the WDR function may be affected by the area of the bright part of the screen optimize the installation angle for the best WDR performance If you increase LIMIT the screen display may be distorted If you use the VPS Virtual Progressive Scan function the CCD reads differently so you can not use WDR simultaneously If you set VPS to ON WDR will be automatically set to FIXED Mode E AA This function reduces the background noise in a low luminance environment 1 When the SETUP menu screen is displayed select SSNR3 by using the Function Setup switc
17. efore supplying it to the camera High Resolution Vandal Dome Camera SCV 3080 Instruction Manual Quick Install Guide Template Cable for test monitor connection Plastic Anchor 4 EA L wrench Fixing Screws 4 EA Tapping Screws 4 EA Pan Base Control panning angle of camera Rotate Base Control rotating angle of camera 3 9 Vari focal Lens Module 2 8 11mm F1 2 Video Output Terminal to Monitor Function Setup switch Display the menu on the screen and move the cursor to four directions to confirm status or changing a selected item Video Output Jack Power Input Terminal DAN Input Terminal You can switch to Day amp Night Mode by connecting an external Tu signal to this terminal MD Output Terminal Motion detection signals are output through this terminal Ground Terminal Dome Cover Inner cover 9 Wing locker D Lock releaser Notes Be sure to connect the Day amp Night input terminal to GND when using an external input 1 Using the L wrench provided loosen 3 screws by turning them counterclockwise and separate the dome cover Dome Cover 2 Lift up the inner cover while gently pressing both ends to separate it from the unit Inner cover 3 Loosen 3 screws by turning them counterclockwise press both left and right lock releases inwards in arrow direct
18. erature Power Input Terminal As shown in the table above voltage decreases as the wire gets longer Therefore use of an excessively long adaptor output line for connection to the camera may affect the performance of the camera There may be some deviation in voltage drop depending on the type of wire and the manufacturer Notes Be sure to connect power only after all the installation is complete Note that AC DC adaptor is not supplied with camera Ground should be connected to the GND terminal Coaxial Communications System OSD Control method JOYSTICK JOYSTICK DOWN JOYSTICK LEFT JOYSTICK RIGHT Video Cable The camera s video output port is connected to the monitor with a BNC coaxial cable shown below If the distance between the camera and the monitor exceeds the recommended maximum please use an auxiliary video amp Distance Recommended Cable Specification 300m 3C2VRG 59 450m 5C2VRG 6 U 600m 7CANRG TUU Notes Itis recommended that pure copper coax cable is used and not copper coated steel as this will cause issues with the communication over the coaxial cable BRIGHTNESS SHUTTER AGC SENS UP e RETURN eaw eOUTDOOR INDOOR e MANUAL e AWC SET OFF eUSERBLC HLC a SSDR WDR SSNR3 eon eorr AUTO EXTERN COLOR DAY NIGHT e
19. ful interference in which case the user will be required to correct the interference at his own expense WARNING Changes or modifications not expressly approved by the manufacturer could void the user s authority to operate the equipment WARNING To prevent electric shock and risk of fire hazards Do NOT use power sources other than that specified Do NOT expose this appliance to rain or moisture This installation should be made by a qualified service person and should conform to all local codes Features e Precautions e Components and Accessories Overview Installation ude Installation Adjusting the monitoring direction of the camera Optional Accessories for Installation lt lt lt he Connection i Connecting to Monitor Connecting to Power Using Coaxial Communications mits e Operating Your Camera ire Menu Configuration e Menu Setup LENS gt EXPOSURE io WHITE BAL White Balance BACKLIGHT i SSNR3 t his DAY NIGHT gt PROFILE SPECIAL e Troubleshooting lt lt lt e Specifications Dimension igle I pproved Dust and Rain nt With dust and rain resistant design the camera can be installed outside under building eaves or places that are exposed to the dust and rain By adopting double speed 410 000 pixel Sony CCD t
20. gs Select Custom for Simple Setup mode Configure the menu options to your custom settings 69 The settings are automatically saved as Custom mode Profile user mode don t initialize when menu resets 3 In the PROFILE menu you can configure the following camera settings at once NANUAL 250 GAN HGH WHTEBAL ATW AW ATW OUTDOOR INDOOR BACKLIGHT OFF OFF USERBLC OFF OFF ON ON ON ON ON DAYNGHT AUTO avo AUTO AUTO 1 When the SETUP menu screen is displayed select SPECIAL by using the Function Setup switch so that the arrow indicates SPECIAL 2 Select a desired mode using the Function Setup switch IMAGE RD IMAGE ADJ 1 When the SPECIAL menu screen is displayed select IMAGE ADJ by using the Function Setup switch so that the arrow indicates IMAGE ADJ 2 Select a desired mode using the Function Setup switch gt 1 MONITOR Monitor Please change the settings value of video appropriate to your monitor LCD Please select this menu item when using an LCD monitor You can change the gamma PED level and color gain in the sub menus CRT Please select this menu item when using a CRT Monitor You can change the PED level color gain in the sub menus USER Please use this menu item when using a monitor other than sta
21. h so that the arrow indicates SSNR3 2 Select a desired mode using the Function Setup switch ON Activates SSNR3 so that noise is reduced OFF Deactivates SSNR3 Noise is not reduced 3 Set the SSNR3 mode to ON and press the Function Setup switch Then you can adjust the noise reduction level Notes You cannot set the SSNR3 to ON or OFF when the AGC mode of the EXPOSURE menu is OFF When adjusting the noise reduction level in the SSNR3 mode remember that the higher the level set the more the noise level will be reduced as will the brightness of the image You can display pictures in color or in black and white 1 When the SETUP menu screen is displayed select DAY NIGHT by using the Function Setup switch so that the arrow indicates DAY NIGHT gt 6 DAY HIGHT AUTO 2 Select a desired mode using the Function Setup switch according to the picture display you want CAUTO The mode is switched to Color in a normal environment but switches to B W mode when ambient illumination is low To set up the switching time for AUTO mode press the Function Setup switch You can turn on or off the burst signal on B W mode BURST MODE You can tum on or off the burst signal on B W mode DURATION You can select the day night switching point DWELL TIME You can select day night switching delay time from 3s 5s 75 10s 15s 20s 305 40s 60s
22. he camera produces clear picture quality with a horizontal resolution of 600 TV lines for color and 700 TV lines for BAW 2244 a ent Sensitivity A PRIJA The built in high sensitivity COLOR CCD produces a clear image Color 0 3 Lux 50IRE F1 2 0 0006LUX SENS UP 512 BAW 0 01 Lux 50IRE F1 2 0 00002 LUX SENS UP x512 Without assistance from an extemal sensor this camera independently detects and traces obj while examining stillness and movement to acti the alarm pda 31 3 Samsung Super p ction Functi Poy m The high performance SV V DSP chip ly removes low light gain noise and afterimage provide clear images even in dark environm SU bA v i amp Night ICR s pa bag A This camera has function that automatically selects the mode that is appropriate for daytime or night time conditions The COLOR mode operates in daytime conditions to provide optimum colors and B W mode operates in night time conditions to enhance the definition of the image 4 vx 3 E 2 ung Super Dynamic Range For images with high contrast between bright and dark areas from difficult lighting conditions such as backlighting this camera selectively illuminates darker areas while retaining the same light level for brighter areas to even out the overall brightness lt 2 You can set a mode according to the camera installation conditions BASIC DAY NIGHT BACK
23. ion to unlock the stopper and then separate the camera from the case Main Body Camera 1 Affix the mounting template supplied to the mounting surface 2 Drill holes diameter 5mm more than 35mm deep on the ceiling by matching to the holes on the case bed and insert plastic anchors HUD 5 fully into the holes Fix the case bed on the ceiling by using Tapping Screws TH M4xL30 4 places 3 Connect power and video cables and arrange cable running not to damage or squeeze them and assemble the camera unit in the reverse way 4 Pass the power and BNC cable through the hole you want to pass them when mounting the main body on the mounting bracket 5 Secure the camera on its mounting bracket with the four screws M4 machine screw x3 1 Secure the mounting bracket on the place you want to mount it after combining the mounting bracket with the pipeline Hole for 3 4 pipe IIS B 0202 1966 SN 2 Connect power input and video output cables with the each cable from pipeline 3 Secure the main body on mounting bracket ix N NA bb M4 machine screw x 3 1 Adjust the lens in a desired direction 2 Secure the inner cover to the main unit 3 Assemble the Dome Cover For waterproof purpose fix and secure the bolt using L wrench provided Main Body Camera t SAMSUNG Panning Til
24. lows automatic gain control from 5 308 to 37dB SENS UP When it is night or dark the camera automatically detects the light level and maintains a clear picture if this mode is activated OFF Deactivates the SENS UP function AUTO Activates the SENS UP function If you set the Function Setup switch to AUTO mode You can adjust the brightness by increasing or decreasing the shutter speed x2 x512 Note that the higher the zoom level the brighter the screen but the more likely it is that an after image will appear Although Noise Spots and Whitish symptoms may occur in SENS UP operation when the zoom level is increased this is normal RETURN Select this to save the changes the EXPOSURE menu and return to the SETUP menu Use the White Balance function to adjust the screen color 1 When the SETUP menu screen is displayed select WHITE BAL by using the Function Setup switch so that the arrow indicates WHITE BAL 2 Select a desired mode using the Function Setup switch Wa D gt 5 BAL 3 Select one of the following 5 modes as appropriate for your purpose Select this when the color temperature is between 1 700 K and 11 000 OUTDOOR Select this when the color temperature is between 1 700 K and 11 000 sodium light inclusion INDOOR _ Select this when the color temperature is between 4 500 and 8 500 K MANUA
25. ment CCTV Camera Model Name SCV 3080P Beginning Serial NO C5CX6V3Z300001X Year of Manufacture 2010 03 01 Conformance to EN 55022 2006 EN 50130 4 2003 We the undersigned hereby declare that the equipment specified above conforms to the above Directive s Manufacturer SAMSUNG TECHWIN CO LTD Legal Representative in Europe Signature 2 Cru Signature Full Name BONJENG GU Full Name Position QUALITY CONTROL MANAGER Position Place CHANGWON KOREA Place Date 2010 03 01 Date SAMSUNG TECHWIN SALES NETWORK SAMSUNG TECHWIN 0 LTD Samsungtechwin R amp D Center 701 Sampyeong dong Bundang gu Seongnam si Gyeonggi do Korea 463 400 TEL 82 70 7147 8740 60 FAX 82 31 8018 3745 SAMSUNG TECHWIN AMERICA Inc SAMSUNG TECHWIN EUROPE LTD 1480 Charles Willard St Carson CA 90746 UNITED STATES Samsung House 1000 Hillswood Drive Hillswood Business Park Tol Free 1 877 213 1222 FAX 1 310 632 2195 Chertsey Surrey UNITED KINGDOM 16 OPS www samsungcctvusa com TEL 44 1932 45 5300 FAX 44 1932 45 5325 www samsungtechwin com www samsungsecurity com P No Z6806 1229 01A
26. ndard ones You can change the gamma PED level and color gain in the sub menus VPS Virtual Progressive Scan This is an advanced technology that reproduces a sharp progressive image This is appropriate to high quality recording and file transfer via the Internet OFF Selects 2 1 Interlaced Scan as the Imaging Method ON Selects Progressive Scan as the Imaging Method REVERSE You can reverse the picture OFF You don t reverse the picture H REV You can flip the picture horizontally on the screen V REV You can flip the picture vertically on the screen HV REV You can flip the picture horizontally and vertically on the screen PIP Picture in Picture Displays a full size image along with the thumbnail to provide more detailed information The position of the thumbnail is adjustable D 700M You can use a digital zoom of x1 x16 FONT COLOR You can change the OSD font color White Yellow Green Red Blue SHARPNESS As you increase this value the picture outline becomes stronger and clearer Adjust this value appropriately depending on the sharpness of the picture RETURN Select this to save the settings for the IMAGE ADJ menu and to return to the SPECIAL menu If you increase the SHARPNESS level too high the picture may become distorted or When the V REV or H REV mode is enabled the text on the screen does not flip noise may appear CAM TITLE
27. pean countries with separate collection systems This marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal a cu Use only under temperature conditions between May lower image O 50 C and 50 C Provide good ventilation when using in high temperature conditions Severe lighting changes or flickering may lens is the most important component hinder normal camera operation of the camera Be careful not to smear it with fingerprints LI 9 NG E 7 May cause a product malfunction May damage the CCD Notes Exposure to a spotlight or an object emitting strong light may cause smear or blooming Ensure that the power source complies with normal specifications b
28. shutter value of ESC shutter mode gt 1 LENS gt 2 EXPOSURE 1 When the SETUP menu screen is displayed select EXPOSURE by using the Function Setup switch so that the arrow indicates EXPOSURE 2 Select a desired mode using the Function Setup switch BRIGHTNESS Adjusts the video brightness O SHUTTER You can select the shutter Shutter speed is fixed at 1 60 sec 1 50 sec ESC Select this to control the shutter speed automatically If ESC is selected the shutter speed is automatically controlled depending on the ambient illumination of the subject MANUAL You can control shutter speed manually NTSC MODEL 1 60sec 1 120 000sec PAL MODEL 1 50sec 1 120 000sec AFLK Select this when you experience picture flicker this happen when there is a clash with the installed lighting frequency Notes Set the shutter mode to if color rolling occurs When the SHUTTER is set to ESC after selecting the Internal Synchronization Type the picture may become unstable if the camera faces a bright fluorescent light Therefore take care when choosing the installation position When the SHUTTER is set to MANUAL or A FLK mode SENS UP will be disabled AGC AUTO GAIN CONTROL The higher the gain level the brighter the screen but the greater the noise OFF Deactivates the AGC function LOW Allows automatic gain control from 5 308 to 32dB HIGH Al
29. ting Lens rotation 1 You can adjust the camera direction only when the camera is fixed on the ceiling Then turning the camera to the left or right is referred to as while moving the camera angle up or down is Tilting For panning the panning limit is 220 for the clockwise and 135 for the counter clockwise a total of 355 enabled further rotation is prevented by the stopper Adjust the panning angle so that the camera settles in the right horizontal position You can adjust the panning up to 135 in each one direction and 220 in the other direction a total of 355 Adjust the tilting angle so that the camera settles in the right vertical position You can adjust the tilting between 0 and 90 e The total rotation range is 355 You can make adjustment in one direction up to 125 and 230 in the other direction 2 Methods of adjustment The case of wall installation After mounting the camera on the wall adjust the panning angle so that the camera faces a desired direction when tilting Adjust the Rotate position to fit the video to the screen borders Then adjust the tilting angle so that the camera faces the monitoring direction The case of ceiling installation After mounting the camera on the ceiling adjust the panning angle according to the Monitoring direction You should adjust the panning angle lest that the video be displayed upside down on the monitor Adj
30. ust the Rotate position to fit the video to the screen borders Then adjust the tilting angle so that the camera faces the monitoring direction Notes For smoother Rotate adjustment set the Tilt position between 60 80 For your easier installation you can purchase appropriate optional accessories 1 WALL MOUNT ADAPTOR SCX 300WM f HANGING MOUNT SCX 300HM This adaptor lt N is used when installing the dome camera le onto a wall 7 ma 2 CEILING MOUNT ADAPTOR SCX 300CM HANGING MOUNT SCX 300HM This adaptor is used when installing the dome camera on a concrete ceiling 3 POLE MOUNT ADAPTOR SCX 300PM This is an adaptor for WALL MOUNT ADAPTOR SCX 300WM installation on a pole whose diameter is bigger than 80mm 4 CORNER MOUNT ADAPTOR SCX 300KM This is an adaptor for WALL MOUNT ADAPTOR SCX 300WM installation on the corner of wall joint Connect the Video Output jack to the VIDEO IN jack of monitor Monitor As the connecting method varies with the instruments refer to the manual supplied with the instrument f necessary you can connect the monitor to the REMOTE jack on the back of your camera Only connect the cable when the power is turned off Connect the adaptor to the power input terminal as shown in the figure below Output of the adaptor should be either one of AC 24 V 1 5 A or DC 12V 1 0 A Note that using DC 12 V may cause lower heater temp
31. ves transparency from the masking area SEL POS 05 YPOS Adjust the size and position of the selected area RETURN Select this to save the PRIVACY menu settings and return to the SPECIAL menu C DIS Digital Image Stabilizer This function mitigates any picture movement due to external factors such as wind As the DIS function uses the digital zoom the camera s resolution will decrease DIS doesn t operate when background illumination is too low DIS doesn t operate when object pattern is monotonic as like sky or white wall LANGUAGE You can select the menu language according to your requirements CRETURN _ Select this to save the SPECIAL menu settings and return to the MAIN SETUP menu Select a desired EXIT mode using the Function Setup switch depending on the camera purpose SAVE Save the current settings and exit the MAIN SETUP menu O NOT SAVE Do not save the current settings and exit the MAIN SETUP menu CRESET Resets the camera settings to the factory defaults Language and Monitor settings are not initialized If you have trouble operating your camera refer to the following table If the guidelines do not enable you to solve the problem contact an authorized technician Nothing appears on the screen gt Check that the power cord and line connection between the camera and monitor are properly connected Check that you have properly connected B
Download Pdf Manuals
Related Search