Newstar FPMA-D1030D-6 flat panel desk mount
Contents
1. To mount your flat panel monitor or any parts at an ergonomically correct position start at step 1 and continue as directed Fitting Tools Check List Pn ee X16 Fitting Tools Check List Secure the cranking unit to the bracket with at least four screws The use of screws and screws position depends thickness of desk Fully secure screws with allenkey 5mm provided Fix the clamp on the desk Use 4mm Allen key to secure the pole amp clamp with 4 screws For desks 15 85 mm thick over 30 mm is suggested Loosen two screws slightly with 4mm Allen key Put the arm into the post and adjust it to the suitable position Tighten it up Finally putin the plug Notice Then put the screw plate cover through the pole and check the pin position with the screw together Insert the arm into the pole Adjust the level of high to the most comfortable view Use the lever tighten the arm as figure A or secure it with one screw as figure B and then putin the plug 1 Please loosen the knob at first and then apart the fixing lump fixing NK lump Assembly Guide ae Place LCD with facing downward on x4 i NewStar user s Manual O These screws M4 15L are just for special monitor when the original screws are too short to flat surface Place VESA on the LCD back as figure and a2. lign to the screw holes Secure them together with ES four screws And then tighten them up with screwdriver not provided LCD Monitor Arm FPMA D1030D6 75mmx75mm 100mmx100mm VESA interface Insert the VESA with LCD display on already into the arm and press it down Then secure fixing lump on VESA with knob as figure down step 1 2 3 If the arm is loose please use the Allen Key 5mm to tighten the screw Loading 36kg 79 2 Ibs Please avoid to pinch your hand during assembling the arm computerproducts www NewStar nl Phone 31 0 23 547 88 88 2009 06 29
Download Pdf Manuals
Related Search