Samsung SVS-5R storage enclosure
Contents
1. Block4 Block6 HDD 1 HDD 2 HDD 3 HDD 4 User s Manual To configure the SVS 5R to RAID5 Hotstandby you must change the RAID mode by using the Configuration Tool When the following window appears in the screen select RAID5 under Select RAID level Select 3 Hotstandby under Select number of disks then click Configure SAMSUNG TECHWIN SYS 5R Configuration Tool Device detected SVS 5R Select RAID level Select number of disks OrAIDo ORAID 1 ORAID 0 1 lt 5 Ed SAMSUNG TECHWIN s Configuration Tool Updating configuration DO NOT UNPLUG THE DEVICE emm SAMSUNG TECHWIN Ed SAMSUNG TECHWIN s Configuration Tool SAMSUNG TECHWIN The device has been successfully configured PLEASE PRESS EXIT Clicking the Exit button resets the SVS 5R and displays the following message on the LCD at the front panel To change the RAID mode press the left button 30 A confirmation message appears asking you if you really want to reset the RAID settings Resetting the RAID settings will delete ALL data saved in the SVS 5R When the following window appears press the left button to reset the RAID settings When the RAID5 Hotstandby mode is successfully configured the LCD displays the following message Connect to a DVR to begin saving data 4 2 RAID Rebuilding When the SVS 5R is in the RAID rebuilding process and its connected DVR is in the Hal2. RAID5 Unit SVS 5R User s Manual Thank you for purchasing a Samsung RAID5 Unit Before attempting to connect or operate this product please read these instructions carefully and save this manual for future use ENGLISH User s Manual Preface Thank you for purchasing the Samsung DVR storage This is a user instruction manual for the SVS 5R The user installing and or operating this item needs to be aware of this manual and any other manual referenced in this manual before installing or operating and use the item accordingly This manual and the software and hardware explained herein are protected by copyright law All copying reprinting and translating to other languages of part of or all of its contents without permission of Samsung Techwin Co Ltd are not allowed except for fair use within the scope of copyright law The specifications of this product are subject to change and upgrade without prior notice Product Warranty and Limitations The manufacturer of this product is not responsible for any occurrence related to sales of this product nor does the manufacturer delegate such responsibility to a third party The product warranty does not cover accidents negligence abuse or improper use for the item in whole or in any part Additionally the manufacturer does not provide warranty for any additional part or piece that was not supplied by the manufacturer The warranty is valid for three years from the purchase date Durin
3. or throwing of the item during operation v Before adding hard disks from a third party please contact your sales agent and avoid a possible malfunction v Using this product in conjunction with hard disks from unauthorized third parties is not covered by the product warranty Y This product is a peripheral device for a security system not a whole security system against fire and theft Samsung shall not be liable directly or indirectly for any loss or damage which is caused by alleged to be caused by or caused in connection with the use of this item Samsung Techwin cares for the environment at all stages of product manufacturing to preserve the environment and is taking a number of steps to provide customers with more environmentally friendly products e CO The Eco mark represents Samsung Techwin s wish to create environmentally friendly products and indicates that the product RoHS compliant satisfies the EU RoHS Directive User s Manual FCC Compliance Statement Caution Any changes or modifications in the construction of this device which are not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment NOTE This equipment has been tested and found to comply with the limitations for a Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is
4. risk of explosion or fire Do not touch the power plug with wet hands to avoid electric shock Keep the cooling fan away from any electrical source Do not pull on the power plug with any force a damaged plug may cause electric shock or fire Disassembly and Cleaning There is a risk of malfunction shock other dangers Do not disassemble or attempt to fix the product yourself To prevent malfunction or shock do not use a wet cloth or oil based cleaning agent to clean the cover of the item Clean the cover with a dry cloth User s Manual T Caution Misuse or wrongful operation of the item may result in injury or damage to the item It indicates caution should be observed when operating Upon Installation Y Please keep at least a 15cm distance between the cooling fan and the wall to provide sufficient ventilation Y Do not drop or install on an unstable surface to avoid shocks and vibration These may cause malfunctions Y Do not install in areas exposed to direct sunlight or any heat source Excessive heat may cause deformation and malfunctions Y Please avoid installing a new camera while the existing camera is recording This may decrease the video quality To avoid decreasing video quality please only record after installation of a new camera is complete During Use Y Avoid shock and vibration while operating or moving the item lt Avoid movement any impact
5. the Configuration Tool When the following window appears the screen select RAIDO 1 under Select RAID level Select 4 under Select number of disks then click Configure SAMSUNG TECHWIN SVS 5H Configuration Tool Device detected SVS 5R Select RAID level Select number of disks ORAIDO 2 3 Hotstandby Ed SAMSUNG TECHWIN s Configuration Tool Updating configuration DO NOT UNPLUG THE DEVICE 7 SAMSUNG TECHWIN Ed SAMSUNG TECHWIN s Configuration Tool enm SAMSUNG TECHWIN The device has been successfully configured PLEASE PRESS EXIT Clicking the Exit button resets the SVS 5R and displays the following message on the LCD at the front panel To change the RAID mode press the left button User s Manual A confirmation message appears asking you if you really want to reset the RAID settings Resetting the RAID settings will delete ALL saved in the SVS 5R When the following window appears press the left button to reset the RAID settings When the RAIDO 1 mode is successfully configured the LCD will display the following message Connect to a DVR to begin saving data 4 1 4 RAID5 The SVS 5R supports RAID5 Using RAID5 requires 3 or 4 SATA hard drives When configured to RAID5 the SVS 5R saves data as shown in the picture below RAID5 uses block level striping with parity data to save data across all connected SATA hard drives Thus data is not lost even if a
6. this SVS 5R external SATA eSATA storage device can be easily mounted in a cabinet along with DVR units To achieve space efficiency it is 1U high equipped with slots for a maximum of 4 SATA hard drives It offers various levels of RAID Redundant Array of Independent Disks to provide enhanced data stability and overall system performance Featuring the hot swap drive bay option the SVS 5R enables easy hard drive replacement when errors occur When configuring the SVS 5R to RAID1 RAIDO 1 RAID5 or RAID5 Hotstandby you can replace SATA hard drives and then rebuild the RAID array when one or more connected SATA hard drives fail 2 1 Features 10 19 inch rack case Hardware RAID solution Maximum transfer speed of 3 0Gbps SATA II D1 480fps record and display frame rate Maximum 4 SATA hard drives 250GB 1TB Supports RAIDO RAID1 RAIDO 1 RAID5 and RAID5 Hotstandby Supports hot swappable hard drive bays Front LCD for the RAID status display Error alarm with sound and light Mute switch for error alarm Supports Plug and Play and Hot Plug Maximized space efficiency and disk capacity at economical costs Expandable for more storage Supported Devices SVS 3200 SVR 1680 SVR 1645 SVR 960 SVR 945 2 2 Components Please make sure that your product includes all of the accessories as shown below SATA Cable 1ea AC Power Cord 1ea Program CD 1ea Access Panel Lo
7. 0840SCE 750GB WD7500AVCS 500GB ST3500830SCE 500GB WD5000AVJS 250GB ST3250820SCE 250GB WD2500AVJS Specification SVS 5R Transmission Speed Up to 3 0Gbps SATA II Maximum Capacity Up to 4TB Internal HDD Up to 4 SATA HDDs Support Hot Swap Function RAID RAID 0 1 0 1 5 eSATA 1 External SATA ports for DVR connection USB USB2 0 RAID configuration only Operating Temperature 5 45 41 113 F Operating Humidity 20 RH 70 RH Input Voltage 115 230V AC 10 50 60 Hz Autoranging Dimensions WxHxD 482 x 44x433mm 18 97 1 73 17 04 Weight 4X hard disks Approx 6 4Kg 14 1 Ib Rack Mount Kit For mounting one unit in an EIA 19 inch rack Supported Devices SVR 3200 1680 1645 960 945 Certifications FCC Class A UL cUL listed CE Class A Imensions User s Manual Product D o 21 o 40 SAMSUNG TECHWIN gi SALES NETWORK SAMSUNG TECHWIN CO LTD 145 3 Sangdaewon 1 dong Jungwon gu Seongnam si Gyeonggi do Korea 462 703 82 31 740 3151 8 482 31 740 8145 SAMSUNG TECHWIN AMERICA Inc 1480 Charles Willard St Carson 90745 UNITED STATES Tol Free 1 877 213 1222 FAX 1 310 632 2195 www samsungcctvusa com SAMSUNG TECHWIN EUROPE LTD Samsung House 1000 Hilswood Drive Hillswoo
8. age capacity of the SVS 5R before configuring it to RAID1 User s Manual Block4 Block6 9 REL gt 558 Ww w HDD 1 Mirroring HDD 2 To configure the SVS 5R to RAID1 you must change the RAID mode by using the Configuration Tool When the following window appears on your screen select RAID1 under Select RAID level Select 2 under Select number of disks then click Configure SAMSUNG TECHWIN SVS 5H Configuration Tool Device detected SVS 5R Select RAID level Select number of disks ORAID 0 92 1 When the RAID settings complete the following popup window appears Click Exit 22 Ed SAMSUNG TECHWIN s Configuration Tool Updating configuration DO NOT UNPLUG THE DEVICE enm SAMSUNG TECHWIN Ed SAMSUNG TECHWIN s Configuration Tool eX SAMSUNG TECHWIN The device has been successfully configured PLEASE PRESS EXIT Clicking the Exit button resets the SVS 5R and displays the following message on the LCD at the front panel To change the RAID mode press the left button A confirmation message appears asking if you really want to reset the RAID settings Resetting the RAID settings deletes ALL data saved in the SVS 5R When the following window appears press the left button to reset the RAID settings When the RAID1 mode is successfully configured the front LCD displays the following message Connect to a DVR to b
9. and software The product dimensions and design are subject to change and upgrade without prior notice User s Manual Table of Contents CHAPTER 1 SAFETY WARNINGS uman 5 i1 Warning SYNDE 5 a038 na te pa GA e rea ag Ret ed E d 5 2 50 ieod eias 8 2 1 nt AN na 8 2 2 aree e ta e ae eaten ANA 9 2 3 etr tenete tatit eus 10 2 3 1 Pront eee ea dae el eere 10 2 3 2 SOMME uec 11 2338 e etie eR 12 CHAPTER 3 13 3 1 ma ee E 13 3 2 Initializing a HDD iie e eee e Glee Ai 15 CHAPTER 4 OPERATION t eiie eb re tei 17 4 1 pA BEST NA 17 4 1 1 nace tie ae a halos 18 412 RAID deat NAG tates aes RE te 21 41 3 BAIDOST iios ie ed e aep e ee m eoe ride 24 414 etenim eat dendi 26 4 1 5 BAID5 xHotstandby erede tetendit reds 29 42 BAID Rebullding 5 meo ade 31 4 2 1 RAIDO aches Hosted adem t eiae d o oa he die 31 422 ANNA ER RUBER 32 42 3 BAIDOXT aano nanan e Re NAKAGAT KALA ee ie n Lo ERR ween aes 33 42 ret c
10. by mode while the RAID is being rebuilt When the RAID array is successfully rebuilt the front LCD displays the following message User s Manual Chapter 5 Connecting to DVR The SVS 5R HDD extension unit uses the eSATA port to connect to a DVR To ensure proper installation please follow the instructions below Applicable Models SVR 3200 SVR 1680 SVR 1645 SVR 960 SVR 945 Please check the eSATA port on the back side of the SVS 5R eSATA Port Connect plugs of the enclosed eSATA cable to the eSATA port of a DVR and the SVS 5R Caution Please use the enclosed eSATA cable to connect the SVS 5R to a DVR 36 5 1 Adding Removing a Hard Disk This section describes how to add remove or format a hard disk Select System Setup Disk in the menu System Setup Password Dik Disk Status ENTER Select ESC Exit Disk Manager Disk Manager is used to manage internal and external HDDs It manages HDD status bad blocks disk size enabled disabled status etc A Lo System Setup Disk Password gt Type Model 5 Enabled IntA ST3320820SC 305245 Yes intB ST3750B40SV 715404 Yes 8 33208205 305245 Yes Ex18348 FAT 0 ATAExter 1430871 aw 4 ENTER Select ESC Exit ENTER Select ESC Exit User s Manual Type Displays disk locations and t
11. ce ach e rot tM M CCo ES 34 4 2 5 RAID5xHotstandby etit 35 User s Manual CHAPTER 5 CONNECTING TO 36 5 1 Adding Removing a Hard Disk 37 HDD RECOMMENDED 39 SPECIFICATION coat emendatus etico ea kaha 39 PRODUCT DIMENSIONS ua NAA pama 40 User s Manual Chapter 1 Safety Warnings 1 1 Warning Symbols Danger Misuse or wrongful operation of the item may result in death injury or bring about other harmful results It indicates absolute caution must be observed when operating said item Before Setup v Please set up the proper voltage AC 100V 240V before connecting to a power source Make sure the power is turned off before set up There is a risk of shock or fire be sure to avoid setting up in places with high humidity To prevent electric or static shocks connect the ground wire properly During Use lt When opening product cover there is a risk of electric shock Only a professional should open the cover Do not plug in multiple products to a single power source it is often the cause of short circuits which may cause fire Do not place water or any heavy items on top of the product these may cause a malfunction Do not use this item in a location containing propane gas gasoline or other flammable substances to avoid
12. ck 1 pair Rack Mount Kit 1ea User s Manual 2 3 Part Names 2 3 1 Front SAMSUNG Function The red LED turns on when the SVS 5R encounters an error The white LED turns on when data is being Name 1 Error LED Red 2 Network LED White 3 Access Panel Lock Front LCD 4 5 Settings Button transferred to or from the SVS 5R Locks or unlocks the front panel of the product Shows the RAID Status of the SVS 5R status of connected SATA hard drives and RAID rebuilding information Performs commands displayed in the front LCD 10 2 3 2 Front Il Name Function Turns off the SVS 5R alarm sound when an error 1 Mute Switch occurs during the RAID operation 2 Power Switch Turns the SVS 5R on or off The blue LED lights up when the SVS 5R is turned 3 Power LED Blue on User s Manual 2 3 3 Back Rear Name 1 Power Connector 2 Power Fan 3 USB Port eSATA Port 4 5 Cooling FAN Function Connects the power cord to the product Keeps the SMPS inside the SVS 5R at an optimal temperature Used to set the SVS 5R RAID settings Used for data transfer to and from the SVS 5R DVR connection port Keeps the SVS 5R at an optimal temperature 12 Chapter 3 Installation 3 1 Installing HDD The SVS 5R supports a maximum of 4 SATA hard drives To ensure proper installation please follo
13. d Business Park Chertsey Surrey UNITED KINGDOM KT16 OPS TEL 44 1902 45 5300 44 1932 45 535 www samsungtechwin com VAN 0B 03 WW w samsung cctv
14. egin saving data User s Manual 4 1 3 RAIDO 1 The SVS 5R supports RAIDO 1 Using RAIDO 1 requires 4 SATA hard drives When configured to RAIDO 1 the SVS 5R saves data as shown the picture below 00 1 uses both striping RAIDO and mirroring RAID1 it will store identical data to 2 RAIDO disk arrays Thus data is not lost even if a SATA hard drive or either disk array should fail When a SATA hard drive or a disk array fails the SVS 5R continues saving data to the other RAIDO disk array To ensure data stability however it is highly recommended that you replace a failed hard drive and rebuild the RAID array In the RAIDO 1 mode total storage capacity of the SVS 5R is simply the capacity of 2 drives please check total storage capacity of the SVS 5R before configuring it to RAIDO 1 The following describes possible instances when 2 SATA hard drives simultaneously fail during the RAIDO 1 mode e g HDD 1 HDD 2 fail gt Rebuilding Can be rebuilt HDD 1 HDD 3 fail gt Halt Entire data is lost HDD 1 HDD 4 fail gt Can be rebuilt HDD 2 HDD 3 fail gt be rebuilt HDD 2 HDD 4 fail gt Halt Entire data is lost HDD 3 HDD 4 fail gt Can be rebuilt Block4 Block6 SVS 5R Jm RAIDO 1 Block4 Block6 HDD 1 HDD 2 HDD 3 HDD 4 Striping Striping nM 2 A To configure the SVS 5R to RAIDO 1 you must change the RAID mode by using
15. es a rebuilding SATA hard drive and the remaining time When the RAID array is successfully rebuilt the front LCD displays the following message 32 4 2 3 RAIDO 1 During the RAIDO 1 mode when a SATA hard drive fails replace it and then rebuild the RAID array During the RAIDO 1 mode when a SATA hard drive fails the SVS 5R activates beeping sounds and the RAID error LED To disable the beeping sounds open the front panel using the access panel lock and then press the mute switch The front LCD will display the SVS 5R status as Degraded d FOOQ indicating a failed SATA hard drive When the failed SATA hard drive is replaced with a new one the LCD displays the following message Press the left button to start rebuilding the RAID array During the rebuilding process the front LCD displays the following message It indicates a rebuilding SATA hard drive and the time remaining until completion When the RAID array is successfully rebuilt the front LCD displays the following message User s Manual 4 2 4 RAID5 During the RAID5 mode when a SATA hard drive fails replace it and then rebuild the RAID array During the RAID1 mode when a SATA hard drive fails the SVS 5R activates beeping sounds and the RAID error LED To disable the beeping sounds open the front panel using the access panel lock and then press the mute switch The front LCD will display the SVS 5R status as Degraded d FOOO i
16. esets the SVS 5R and displays the following message on the LCD at the front panel To change the RAID mode press the left button A confirmation message appears asking if you really want to reset the RAID settings Resetting the RAID settings will delete ALL data saved in the SVS 5R When the following window appears press the left button to reset the RAID settings When the RAID5 mode is successfully configured the LCD displays the following message Connect to a DVR to begin saving data 4 1 5 RAID5 Hotstandby SVS 5R supports RAID5 Hotstandby Using RAID5 Hotstandby requires 4 SATA hard drives When configured to RAID5 Hotstandby the SVS 5R saves data as shown in the picture below RAID5 Hotstandby uses 3 SATA hard drives in the RAID5 mode while putting on the last drive on standby Caution In the RAID5 Hotstandby mode HDD 4 in the SVS 5R is put on standby When a SATA hard drive in the RAID5 mode fails the standby drive replaces the failed drive to rebuild the RAID array and allow the SVS 5R to continue saving data To ensure data stability however it is highly recommended that you replace the failed hard drive immediately In the RAID5 Hotstandby mode total storage capacity of the SVS 5R is simply the capacity of 2 drives It is more stable than RAID5 but has decreased storage capacity please consider the storage capacity before using this mode Block4 Block6 SVS 5R RAID5 Hotstandby
17. f D1 or D1 mode activating the playback option may cause skipping frames This skipping frame issue is simply caused by the RAID rebuilding process once it is complete the screen will no longer skip frames and no data is damaged 4 2 1 RAIDO In the RAIDO mode ALL data saved in the SVS 5R is lost if only ONE of the connected SATA hard drives fails Caution RAIDO does not offer the rebuilding option you must replace a failed hard drive and reinitialize a RAID mode During the RAIDO mode when one of connected SATA hard drives fails the front LCD of the SVS 5R displays the following message notifying you of the loss of ALL data User s Manual Caution RAIDO is not recommended for saving crucial data 4 2 2 During the RAID1 mode when a SATA hard drive fails replace it and then rebuild the RAID array During the RAID1 mode when a SATA hard drive fails the SVS 5R activates a beeping sound as well as the RAID error LED To disable the beeping sound open the front panel using the access panel lock and then press the front mute switch The front LCD will display the SVS 5R status as Degraded d FOXX indicating a failed SATA hard drive When a failed SATA hard drive is replaced with a new one the LCD displays the following message Press the left button to start rebuilding the RAID array During the rebuilding process the front LCD displays the following message This indicat
18. g this period the warranty does not cover the malfunctions in the following areas Malfunction due to user s Dismantling or replacement by the user Connection to an alternate power source Malfunction due to natural disasters fire flood tsunami etc Replacement due to wear and tear HDD Fan etc The warranty of HDD and Fan is valid for one year from the purchase date This warranty specifically excludes product not of Samsung s manufacture which may be included as an adjunctive product in any Samsung system A service charge shall be charged for non warranty products where the 3 year warranty has expired or voided by customer misuse as described in the cases above User s Manual This product is a peripheral device for a security system not a whole security system protecting against fire and theft Samsung is not be liable directly or indirectly for any loss or damage which is caused by alleged to be caused by or in connection with the use of the product Assembly or installation of this item requires experience and technical skills and unauthorized assembly or installation is strictly prohibited Unauthorized assembly or installation may cause fire electric shock or product malfunction Please contact your sales agent for help with safe assembly and installation This manual and the software and hardware explained herein may differ from your product depending on the version of the firmware
19. hard drive fails When a SATA hard drive fails the SVS 5R continues saving data to the remaining hard drives To ensure data stability however it is highly recommended that you replace a failed hard drive and rebuild the RAID array In the RAID5 mode total storage capacity of the SVS 5R is the capacity of total SATA hard drives subtracted by one drive Although RAID5 has decreased data storage capacity it is most recommended as it is safest and has larger capacity than RAIDO 1 26 Block4 Block6 e Paritv 4 5 6 Block6 Block9 HDD 3 HDD 4 To configure the SVS 5R to RAID5 you must change the RAID mode by using the Configuration Tool When the following window appears on your screen select RAID5 under Select RAID level Under Select number of disks select a number of connected SATA hard drives and click Configure SAMSUNG TECHWIN SYS 5R Configuration Tool Device detected SVS 5R Select RAID level Select number of disks O3 Hotstandby When the RAID settings are complete the following popup window appears Click Exit User s Manual Ed SAMSUNG TECHWIN s Configuration Tool Updating configuration DO NOT UNPLUG THE DEVICE enm SAMSUNG TECHWIN Ed SAMSUNG TECHWIN s Configuration Tool SAMSUNG TECHWIN The device has been successfully configured PLEASE PRESS EXIT Clicking the Exit button r
20. ndicates a failed SATA hard drive When the failed SATA hard drive is replaced with a new one the LCD displays the following message Press the left button to start rebuilding the RAID array During the rebuilding process the front LCD displays the following message to indicate a SATA hard drive rebuilding and the time remaining until completion When the RAID array is successfully rebuilt the front LCD displays the following message 34 4 2 5 RAID5 Hotstandby During the RAID5 Hotstandby mode when a SATA hard drive fails another hard drive in standby replaces the failed drive and rebuilds the RAID array When replacing the failed SATA hard drive the new hard drive is automatically set to standby status During the RAID5 Hotstandby mode when a SATA hard drive fails the SVS 5R activates beeping sounds and the RAID error LED To disable the beeping sounds open the front panel using the access panel lock and then press the front mute switch Check the front LCD to make sure that the standby SATA hard drive has replaced the failed drive and begun rebuilding the RAID array automatically d FOOR indicates both the failed SATA hard drive and rebuilding one as well as the time to remaining rebuild the RAID array When the failed SATA hard drive is replaced with a new one the LCD displays the following message To put the new hard drive on standby press the left button The new hard drive is in stand
21. ool SAMSUNG TECHWIN Updating configuration DO NOT UNPLUG THE DEVICE Ed SAMSUNG TECHWIN s Configuration Tool SAMSUNG TECHWIN The device has been successfully configured PLEASE PRESS EXIT Clicking the Exit button resets the SVS 5R and displays the following message on the LCD at the front panel To change the RAID mode click the button on the left 20 A confirmation message appears asking if you really want to reset the RAID settings Resetting the RAID settings will delete the entire data saved in the SVS 5R When the following window appears press the left button to reset the RAID settings When the RAIDO mode is successfully configured the LCD at the front will display the following message Connect to a DVR to begin saving data 4 1 2 SVS 5R supports the RAID1 Using RAID1 requires 2 SATA hard drives HDD 3 and HDD 4 are not used When configured to RAID1 the SVS 5R saves data as shown in the picture below In the RAID1 mode each of the two hard drives stores identical data Thus data is not lost even if either SATA hard drive fails When a SATA hard drive fails the SVS 5R continues saving data to the other hard drive To ensure data stability however it is highly recommended that you replace the failed hard drive and rebuild the RAID array In the RAID1 mode total storage capacity of the SVS 5R is simply the capacity of one drive please check total stor
22. ool Device detected SVS 5R Select RAID level Select number of disks OrAID oO ORAIDD 1 ORAID 041 O3 Hotstandby RAID 5 Gg 4 1 1 RAIDO The SVS 5R supports RAIDO Using RAIDO requires 2 or 4 SATA hard drives When configured to RAIDO with 2 or 4 SATA hard drives the SVS 5R saves data as shown in the picture below RAIDO saves data across all connected hard drives and storage it has the fastest speed and uses the hard drives to full capacity Caution RAIDO has no fault tolerance entire data of the SVS 5R is lost if even one SATA hard drive fails RAIDO is not recommended for saving crucial data 18 Block4 Block6 For 2 HDDs Block4 Block6 HDD 1 striping M SVS 5R RAIDO Block4 Block6 For 4 HDDs E TG a gt Block4 Block8 Block10 HDD 1 HDD 2 HDD 3 HDD 4 Block6 User s Manual To configure the SVS 5R to RAIDO you must change the RAID mode by using the Configuration Tool When the following window appears on your screen select RAIDO under Select RAID level Under Select number of disks select a number of connected SATA hard drives Click Configure SAMSUNG TECHWIN SYS 5R Configuration Tool Device detected SVS 5R Select RAID level Select number of disks RAID 0 2 ORAID 1 3 ORAID 041 3 Hotstandby ORAID 5 or os Ed SAMSUNG TECHWIN s Configuration T
23. operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which cause the user will be required to correct the interference at his own expense Correct Disposal of This Product Waste Electrical amp Electronic Equipment WENN Applicable in the European Union other European countries with separate collection systems This marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal User s Manual Chapter 2 Summary Designed as a 19 inch rack mount unit
24. reset successfully the LCD displays a message as shown below R5 4d next to the product name indicates the RAID5 mode is successfully configured for 4 SATA hard drives d OOOO at the bottom right indicates the status of connected 4 SATA hard drives The following initials indicate different statuses e g O Operating properly F Failed to connect R Rebuilding S on Standby X Not equipped 16 Chapter 4 Operation 41 RAID Settings The SVS 5R supports RAIDO RAID1 RAIDO 1 RAID5 RAID5 Hotstandby Caution The SVS 5R is initially set up to RAID5 4d RAID5 4d is to configure 4 SATA hard drives with the RAID5 settings To use a different RAID mode please use the Configuration Tool in the enclosed CD Connect plugs of the enclosed USB cable to the back side of the SVS 5R and a windows installed PC USB Cable ile Power Switch When running Configuration Tool from the enclosed CD the following window appears in the computer screen The following instructions describe how to set up each available RAID mode Caution Please set up the RAID settings of the SVS 5R before connecting to a DVR to begin saving data User s Manual E SAMSUNG TECHWIN s Configuration Tool CET SAMSUNG TECHWIN Please connect the storage device you wish to configure SAMSUNG TECHWIN SYS 5R Configuration T
25. tus of the SVS 5R In this case you can rebuild the RAID array by replacing the failed SATA hard drive Using the enclosed access panel lock open the right front panel and then press the power switch on the front panel for at least 2 seconds to turn on the SVS 5R Power Switch When the SVS 5R turns on the front LCD displays a message as shown below The SVS 5R is initially set up to RAID5 4d To use 4 SATA hard drives for RAID5 please wait for 20 seconds after turning it on To use a different RAID mode please refer to 4 1 RAID Settings User s Manual Xx Caution The following message appears each time the SVS 5R turns To keep the initial RAID settings please wait 20 seconds after the product is turned on To change the RAID settings press the left button to move to the RAID resetting mode If all 4 SATA hard drives are properly connected the LCD on the front panel displays a message as shown in the window below on the left To reset the RAID settings press the left button If at least one of 4 SATA hard drives fails to connect the LCD displays a message as shown in the window below on the right Caution Pressing the left button resets the current RAID settings and deletes entire data saved in the SVS 5R Please be cautious when using the button except one necessary case to reset the RAID settings of newly equipped SATA hard drives When the RAID setting of the SVS 5R is
26. w the instructions below Caution All SATA hard drives must be of the same model Using the enclosed access panel lock open the right front panel and then the left front panel while holding down the two buttons on the left panel For the hot swap drive bays D and 3 are shaped identically to each other while 2 and 4 are shaped identically Please install them in the designated locations User s Manual Remove a hot swap drive bay by pulling the handle toward you Using the enclosed screws secure a SATA hard drive to the hot swap drive bay 2 screw grooves are located on either side of the hot swap drive bay x Caution SATA hard drives are of different shape on the front and back When securing SATA hard drive to a hot swap drive bay please make sure to place the SATA connector on the opposite side of the handle of the drive bay Insert the hot swap drive bay into the back of the main frame Gently push the drive bay until it reaches the end of the main frame and then secure it to the frame using the handle Repeat the procedure to insert SATA hard drives to the other 3 hot swap drive bays 14 3 2 Initializing a HDD The SVS 5R shows the status of the RAID operation and connected SATA hard drives through an LCD on the front panel Caution The SVS 5R is initially set up to RAID5 4d Should connected SATA drive fail the front LCD indicates the degraded sta
27. ypes Int A Internal A HDD Int B Internal B HDD Ext External HDD Model Displays HDD models Bad Block Displays HDDs with bad blocks O is displayed when there are no problems Nothing is displayed for HDDs not in use Size in MB Displays HDD sizes in MB Enabled Yes No Enables or disables HDDs Yes Enabled No Disabled To Change HDD to Yes Enabled While selecting No press the Enter button or use the mouse wheel to open the notice window which shows the following message Warning This disk is usable without being formatted Do you want to format the disk anyway Select No to keep the previous data stored in the HDD and change it to Enabled Yes Select Yes to delete the previous data stored in the HDD and change it to Enabled Yes To change HDD to No Enabled While selecting Yes press the Enter button or use the mouse wheel to open the notice window to display the following message Warning Do you want to remove the disk Select Yes to open the The disk has been removed message and change the HDD to Enabled No The HDD is now unused Caution The SVS 5R does not offer you to save data selectively to a hard drive it automatically starts saving data starting from a last enabled HDD 38 HDD Recommended Model Seagate Technology Western Digital Size Model Size Model 1 000GB ST31000340SV 1 000GB WD10EVCS 750GB ST375
Download Pdf Manuals
Related Search