Paxton 332-110-US security or access control system
Contents
1. 11 30 2011 Ins 30006 US TOUCHLOCK K series stainless steel keypad WpPaxton Technical Support 1 800 672 7298 supportUS paxton access com Technical help is available Monday Friday from 02 00 AM 8 00 PM EST Documentation on all Paxton products can be found on our web site http www paxton access com Suitability Security sensitive doors Mounted on metal surface of Wet environments of Readers mounted together of Mounting vO Oe F r u Q Q amp CE b eA lt K75 Screw connector option The unit should be mounted in conjunction with an electrical backbox to achieve the required clearance for the connector If an adaptor plate 310 750 US is fitted the mountings on the backbox can also be used Indoor use only Connection to a control unit reader port This product is not suitable for retail sale All warranties are invalid if this product is not installed by a trained technician Cable extensions Readers can be extended using Belden CR9538 8 core overall screened cable to a maximum of 500 feet Connection modules Reader junction box 325 020 US This module can be used to provide a connection point for the reader RJ45 plug The terminals on the module are then wired color for color to the controller Alternatively the reader can be wired directly into the screw terminals of the control unit by firs2. ersion used must be V3 21 or later and the keypad must be wired into the standard reader port Specifications Min Voltage 8V DC 66 C 151 F Waterproof K75 Screw connection re Indoor use FCC Compliance Class B digital devices This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Class A digital devices This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of t
3. he FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense
4. t cutting off the RJ45 plug and stripping back the wires in the cable Further information on how to purchase Installer Tools is available at http paxton info 841 Reader Port Module 325 030 US This module may be purchased separately to speed up the installing and replacement of readers The reader port module is designed to convert the standard reader ports on Switch2 and Net2 controllers to accept one or two RJ45 connections Pull off the screw terminal block from the reader port and simply replace it with this module Technical Help Here is the list of topics about this product that receive the most technical support inquiries We list them here to help you speed up the installation and trouble shooting process 1 Net2 Bell function Pressing the bell button on the keypad will result in Relay 2 being energised for 1 second A bell sounder can be controlled by wiring one of the bell feeds across COM NO on the relay 2 Switch2 Initialising with 2 keypads Either Keypad can be used to initialise the controller Connect all wires in parallel colour for colour 3 Switch2 White label amp Touchlock Switch Control 922 177 This keypad style does NOT work with these control units 4 Duress Codes Net2 Duress codes cannot be programmed into Net2 Switch2 These systems can accept Duress codes 5 Net2 Replacing an old style keypad ACU Keypad port When using this keypad with Net2 the software v
Download Pdf Manuals
Related Search