Argoclima Hi Fan Black
Contents
1. CERAMIC FAN HEATER CIOISCIO MOR C USER MANUAL Please read carefully these instructions before attempting to assemble install use or maintain the fan heater Protect yourself and others by observing all safety information Failure to comply with instructions could result in personal injury and or property damage Retain these instructions for future reference V 02 09 GENERAL SAFETY INFORMATION Do not use the appliance for other than its intended use This appliance is intended for household use only This product is not a toy Children would be supervised to ensure that they do not play with the appliance This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety Disconnect from mains when not in use or when cleaning To disconnect heater turn switch to off position then remove plug from outlet Pull only by the plug Do not pull on the cord when disconnect heater Do not insert or allow fingers or foreign objects to enter any ventilation or exhaust opening as it may cause an electric shock or fire or damage the heater Do not block or tamper with the heater in any manner while it is in operation Do not use the appliance with a damaged cord or plug If the supply cord is damaged it must be rep2. operation symbol RED appears and the unit begins operating at low power level the indication Low appears on display below on the left and the ambient temperature appears too ON OFF STAND BY LIGHT POWER LEVEL INDICATOR Low 1300W High 2000W POWER LEVEL KEY When you press this Key the heating power pass from low to high level from 1300W to 2000W on display it appears the indication High If you continue to press this key the power level changes from one to the other level TEMPERATURE KEY When you press this Key you can choose the desired temperature from 5 to 35 C To set the temperature you have to press this key press or key and then wait 5 for setting confirmation The temperature then shown on the display will be the ambient temperature If You don t set any temperature the default one is 30 C LED DISPLAY TEMPERATURE OR TIME When both temperature and time are set the display shows alternatively the ambient KEYS When you press this Key You can choose the desired temperature from 5 to 35 C or the time from 1 to 12 hours by 1h step temperature or the resting time TIMER SWITCH OFF TIME To fix a time for the operation of the unit from O to 12 hours by 1h step press this key and then or key to fix the time and then wait 5 for setting confirmation QGOOO When the internal temperature sensor detects the set temperature the heat
3. the product is not allowed to use in the environment filled inflammable air or dust Please do not make the power cord touching the net cover in order to avoid the high temperature hurts the power cord Do not make the wet clothes hang above the heater in order to avoid the dropped water make the product creepage The power supply voltage and frequency must comply to the main technical request of heater The ammeter and the internal line used must bear the using frequency of heater and also take into account that the other electrical appliance can be WARNING DO NOT DEPEND ON THE ON OFF BUTTON SWITCH AS THE SOLE MEANS OF DISCONNECTING POWER WHEN SERVICING OR MOVING THE HEATER ALWAYS UNPLUG THE POWER CORD V 02 09 PRODUCT DESCRIPTION ON OFF power switch air outlet grille touch panel and LED display removable air filter air inlet grille ANN feet rubber W ae oP Se NS power cord OPERATING INSTRUCTIONS Firstly connect the power cord with correct power supply 220 240V Press the ON OFF power switch no 1 in the picture to I position The unit is in stand by mode after two didi sound Then press on off stand by key to make the unit working and all functions available Press the power switch to 0 position to turn off the fan heater Please follow the here below instructions to use the different functions of the fan heater ON OFF STAND BY KEY When you touch this Key the
4. er enters in stand by mode the power indicator turns off and the fan stops after about 10 when the sensor detects a 2 C temperature decrease the heater restarts operating at power level selected initially To ensure continuous operation set temperature higher than desired or maximum value of temperature 35 C THIS FAN HEATER CAN BE PLACED ON THE FLOOR ON A SHELF OR ON THE WALL IN THE LAST CASE YOU MUST TAKE THE SPECIAL HOLDER SUPPLIED WITH THE PRODUCT AND INSTALL IT ON THE WALL AS BY FOLLOWING INSTRUCTIONS and PICTURES WALL SUPPORT HOW TO PLACE THE WALL HOLDER Take the wall holder set screw out the knob widdershins to make the three components separately You can choose the preferred height to put the wall holder but the minimum distance should be 20 cm from both the ceiling and the nearest wall horizontally Fix the base of wall holder by screw and then fix the wall holder to the base by the knob N B check the orientation referring to the mark on the appliance HOW TO PLACE THE UNIT ON THE WALL HOLDER Put the unit on the wall holder inserting firstly the top of the back and then the bottom using the appropriate support points When hang on the wall the unit can be fixed in different positions parallel to the wall directed downward directed downward and to the right directed downward and to the left To adjust the direction remove the unit from the wall loose the knob adjust the support i
5. laced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard It is not recommended to use an extension cord The heater is hot when in use To avoid burns do not let bare skin touch hot surface Keep combustible materials such as furniture pillows bedding papers clothes and curtains at least 0 9m from the front of the heater and keep them at least 0 3m from the sides and rear Do not immerse cord plug or any part of the appliance in water or any other liquid Do not use the heater in dusty environments or where flammable vapours are present e g in a workshop or garage Do not place the heater on or near any other source of heat WARNING IN ORDER TO AVOID OVERHEATING DO NOT COVER THE HEATER A fire may occur if the heater is covered with or touches flammable material including curtains drapes bedding etc when in operation KEEP THE HEATER AWAY FROM SUCH MATERIALS To prevent a possible fire do not block air intakes or exhaust in any manner Do not place heater on soft surfaces like a bed where openings may become blocked Always place the heater on a stable flat level surface when operating to avoid the chance of the heater overturning Locate the power cord so the heater or other objects are not resting on it Do not run power cord under carpeting Do not cover power cord with throw rugs runners or the like Arrange power cord away from room traffic and where it will not be tripped
6. n the desired position and then secure the knob again firmly then place again the unit on the wall To take out the unit from the wall holder press the small lever under the lower arm of the holder and then pull gently the unit V 02 09 REMOTE CONTROL There are six soft touch keys on the remote control which functions are exactly the same as the ones of control panel keys This remote control uses lithium manganese button battery model no CR2032 3 V compliant with New Batteries Directive no 2006 66 EC HOW TO PUT REMOVE BATTERY OF REMOTE CONTROL see the picture here below Open the door of the battery on the back of the remote control press the button and pull back the door Put the battery into the door make sure the polarity is correct Insert the door to the remote control W Battery Installation Information for correct disposal of the battery in accordance with the European Directive 2006 66 EC Please replace battery when its electricity charge is used up please do not eliminate this battery together with normal household waste It must be taken to special local community waste collection centres or to a dealer providing this service Disposing of a battery separately avoids possible negative effects on the environment and human health deriving from an inappropriate disposal and enables its components to be recovered and recycled to obtain significant savings in energy and resources In order t
7. o underline the duty to dispose of this equipment separately the battery is marked with a crossed out dustbin MAINTENANCE WARNING ALWAYS UNPLUG THE CORD BEFORE MOVING OR SERVICING DO NOT IMMERSE HEATER IN WATER CLEANING Clean the filter frequently according to the environment a dirty filter could restrict the air flow and cause the heater to function improperly or shut down Pull out the filter as the direction showed below C Clean the filter by water with washing agent under the temperature of 3 Dry the filter after cleaning it and put back the filter to the unit Use the soft cloth to wipe the dust of enclosure If the enclosure is too dusty use the soft cloth to wipe it with water mixed with neutral detergent under 50 C temperature Then dry the product When cleaning the product do not use oil or chemical material or other objects that can damage the surface Disconnect the power cord when cleaning Otherwise you may get an electrical shock STORAGE Make the heater cool down dry and pack well and then put the product in a dry and ventilated place for stocking Information for correct disposal of the product in accordance with the European Directive 2002 96 EC At the end of its working life this equipment must not be disposed of as an household waste It must be taken to special local community waste collection centres or to a dealer providing this service Disposing of electrical and electronic equipment
8. over Do not use the heater in the immediate surroundings of bathtubs showers washing stands or swimming pools Do not locate the heater below a socket outlet Do not let the mains lead hang over the edge of the table or work surface or touch hot surfaces Do not use outdoors Do not attempt to repair disassemble or modify the appliance There are no user serviceable parts inside WARNING Do not use this heater with a programmer timer or any other device that switches the heater on automatically since a fire risk exists if the heater is covered or positioned incorrectly When the heater is turned on for the first time it may release a slight harmless odor This odor is a normal occurrence caused by the initial heating of the internal heating elements and should not occur again Please do not put any unit on the product In order to avoid any accident please turn off the unit when people leave Please do not use the product when there are no people to take care of children animal or the disabled people If do not use the product for a long time please disconnect the plug put the product into the box and stock the product in a dry and ventilated place When using the product please do not make the air outlet and inlet next to the wall or curtain to avoid obstructing the air and influence the effect Please do not use the product under the direct sunshine The inflammable or explosive article is not allowed to put around the heater And
9. separately avoids possible negative effects on the environment and human health deriving from an inappropriate disposal and enables its components to be recovered and recycled to obtain significant savings in energy and resources In order to underline the duty to dispose of this equipment separately the product is marked with a crossed out dustbin www argoclima com improve your life MADE IN CHINA V 02 09
Download Pdf Manuals
Related Search