Power Acoustik HP-10S headset
Contents
1. Farenheit WA PRES SE PS 4 O O A HP HOS IR Wireless Stereo Headphone USER S MANUAL Installing batteries into the Headphone Lift the battery compartment caver located on the earpiece Insert 2 AAA alkaline batteries not included according to polarity Close the battery compariment cover Using the Headphone 1 Push power switch on the Headphone The red power indicator illuminates 2 Turn volume control knob to adjust the volume amp 00 not cover the infrared light sensor while adjusting the volume 3 Auto mute eliminates static when IR signal is blocked or you are out of lransmitting range 1 3 infrared light sensor 2 battery compartment cover 4 power indicator 5 power switch 6 volume control knab NOTE The unit uses infrared rays to transmit the audio signal If the headphone is placed too far from the transmitter a hissing noise may occur This is characteristic of infrared system and does not mean that system is defective Special Features 1 The headphone has auto mute function When the IR transmitter turns off or the headphone does not receive the IR signal the headphone automatically turns off its power amplifier and mutes 2 The headphone has auto power off function After 3 5 minutes f the headphone does not receive the IR signal it will automatically turn off Cleaning the Headphones Remove dust or stains with a damp cloth only Do not use alcohol benzene2. or thinner CAUTION Listening at high volume levels can lead to permanent hearing damage WARNING Do not try to disassemble headphone Do not place headphone near heat sources or in direct sunlight Do not place on very cold surfaces Do not place headphones where there is marsturerain ra n vibration shock or excessive dust environment Da not store in an unstable location or ina magnetic zone Keep and operate Headphone in a well ventilated environment Do not use oil or grease any mechanical parts All moving parts require no lubrication If any liquid should accidentally fall on or get into the product immediately switch off power Turn power off the headphone when it is not in use for along time Specification System Infrared light Carrier frequency L channel 2 3MHz R channel 2 8MHz Modulation FM Mode Stereo S N gt 60dB Channel separation gt 40dB Distortion lt 1 Frequency response 30 20 Q000Hz Power 2XR3 AAA Current consumpation approx 25mA max play Approx 15mA mute Weight approx 5 6402 battery is not included
Download Pdf Manuals
Related Search