Pyle PAD5 audio converter
Contents
1. MINAS py leaudio com IMPORTANT This gulde you setup the PADS as wel software please take the time to carefully read through this guidi will help you better understand how to use your new product Pee Connect the USB cable to the USB prot on the computer indication on front using the USB cable that came in the PADS jure to connect the smaller square end of the USB cable 2 LINE INPUT The line level input accepts any line level source such as TAPE PLAYER DJ MIXER CD PLAYER WARNING Once you have chosen which INPUT you are going to use make sure that input selector switch is in the appropriate position input selector switch at side of PADS gt E 34 PHONO INPUT The PHONO input accepts any standard magnetic turntable or record player Connect your record player to the PHONO Input making sure to connect the thin black ground wire to the sliver ground screw located on the black of the PADS fallure to connect the ground wire will cause a humming to be present in your recordings 5 OUTPUT The ouput section allows you to use the PADS as an output for your computer and can be used Instead of your computers bulit In output You may then connect the output of the PADS to any mixer Amplifier om with a line level or AUX input then use the built in thumb control located on the front of the PADS to adjust the Volume of the PADS output 8 VOL VOL VOL and VOL to adjus2. o 44 100Hz the Default Sample Format should be 16 bit Both time sample rate convertor and the Real time sample rate converter should be set to High quality Sine Interpolation Then also both the real time dither or the High quality dither should be at none o O 6 FILE FORMAT SETTING in the Uncompressed Export Format section you should chose W microsoft 16bit PCM And although you should chose a compre format like Mp3 we recommend that you use an uncompressed format like WAV when preserving your RARE Records or Tapes the other two sections OGG export setup and Mp3 export setup should be left at their default setting once you have completed your settings choose OK and the settings box will close automatically saving the new settings 7 8 RECORDING BUTTON la the record button to start recording you will a waveform being as Audacity records when you are done press the stop button name your recording u
3. t the output volume 7 REC VOL USE the built in thumb wheel to adjust the record volume 8 PHONO LINE op Make sure the input select switch is set to the input you are using LINE Ifyou are using the LINE input or PHONE If you are using the PHONO Input IMPORTANT AUDACITY Is a freeware program and has no relation to PADS any and all customer service issues should be directed to AUDACITY at Sourceforg 1 Install audacity software TO Install audacity the disk Into your computer CD ROM drive go nu and open my com idacity CD hoose setup this opens the install wizard ok for the audacity icon on your desk top and click It this will open audacity 2 Once the program is open choose the EDIT pull down menu and choose PROPERTIESThis will open a PREFERENCES dialogue box 3 Audio I O SETTING Once the program is open choose the EDIT pull down menu and choose PROPERTIES This will open ENCES dlaloguebox icrosoft sound manag you are going to be using the PADS as your output device 4 Audio I O SETTING The DEVICE should be set to USB audio Codec audacity will then t to record from elther the LINE or PHONO In ding on which one you are using Chann n be chosen hould be kod the second box Software play through play new track while recording li should be checked 5 QUALITY SETTING The The Default Sample Rate should be set t
Download Pdf Manuals
Related Search