Pyle PLMR44 loudspeaker
Contents
1. OVERALL DIMENSIONS PLMR54 FIG 2 OVERALL DIMENSIONS TWO WAY 5 1 4 SEALED SPEAKER SYSTEM Excellent for Monitor or Surround sound Applications 5 1 4 Long Throw Woofer 1 Polymer Dome Tweeter 300 Watts Rated Peak Power ede Frequency Response 75Hz 20KHz 8 Ohm Impedance Vented Design for High Power and Deep Bass Response Heavy Duty Plastic Cabinet Gold Plated Plug Terminals 7 3 7 6 1 2 Spring Loaded Mounting Bracket 187mm 7 165mm 7 Included Dimensions 7 3 8 W x 10 5 8 H x 6 1 2 D E PLMR44 EPLMR54 SEALED SPEAKER SYSTEM OWNER S MANUAL www pyleaudio com FIG 3 EAVE MOUNTING AL MOUNTING THE BRACKET 1 Remove The Bracket Knobs And The Bracket From The Speaker 2 Hold The Bracket Up To The Mounting Surface Plmr Can Be Mounted Either Horizontally Or Vertically Hold The Bracket So That The Speaker Wire Fits Through The Large Circular Wire Hole In The Bracket Align The Bracket To Be Square With The Surroundings Use A Level For Accuracy 3 Mark The Locations Of The Three Shaped Screw Holes Use All Of The Holes 4 Drill Pilot Holes Into The Mounting Surface 5 Gently Pull The Speaker Wire Through The Wire Hole In The Center Of The Mounting Bracket Align The Bracket So That The Holes All Line Up 6 Use Your Hardware To Attach The Bracket To The Mounting Surface FINAL ADJUSTMENTS 1 After Checking That The Speaker Is In phase And Works2. Correctly Angle The Speaker For The Best Sound 2 Hand Tighten The Bracket Knobs Only Power Tools May Over tighten The Knob And Strip The Threads Of The Insert 3 Check That The Entire Installation Is Safe And Secure
3. FIG 4 CONNECTING YOUR SPEARKERS NEGATIVE BLACK INPUT BINDING POST POSITIVE RED INPUT BINDING POST IMPORTANT CONNECT POSITIVE WIRE TO THE POSITIVE TERMINAL OF YOUR AMPLIFIER OR RECEIVER CONNECT NEGATIVE WIRE TO THE NEGATIVE TERMINAL OF YOUR AMPLIFIER OR RECEIVER The following will assist you in connecting the indiviual speakers toyour amplifier or receiver 1 First turn your amplifier or receiver of to avoid damage which may result from accidental shorting of the speaker leads 2 correct phase polarity is critical for proper stereo maging and bass performance the red a terminal on your amplifier or receiver must be connected to the red terminal on your speak r the same applies for the black treminal 3 connect one loudspeaker at a time to ensure proper connection of left and right channels make sure all wires are firmly fastened 4 if you notice a great lack of bass and or central image focus double check your connections for proper polarity FEATURES PLMR44 TWO WAY 4 SEALED SPEAKER SYSTEM Excellent for Monitor or Surround Sound Applications 4 Long Throw Woofer 3 4 Polymer Dome Tweeter 250 Watts Rated Peak Power Frequency Response 90Hz 20KHz 8 Ohm Impedance Vented Design for High Power and Deep Bass Response Heavy Duty Plastic Cabinet Gold Plated Plug Terminals Spring Loaded Mounting Bracket Included Dimensions 6 3 4 W x 9 11 16 H x 6 D FIG 1
Download Pdf Manuals
Related Search