Home

Samsung 320TSn-3

1. I mage Lock 1 Click Settings of the main icons and the Settings Control screen appears Multiple Display Control Sic File AddeaDewce Remote Control SefetyLock FoutDevice Alert Lemp Control Help PEN Faulty Device 0 Select All Clear All Refresh Idle HMO Pe of pc NC a i mi om SEPEREN Oe a 5 Auto Adjustment Info Grid shows some basic information necessary to Settings Control 1 Image Lock Available only for PC BNC 2 Coarse Adjusts Coarse of the selected display 3 Fine Adjusts Fine of the selected display 4 Position Adjusts Position of the selected display 5 Auto Adjustment Self Adjust to the incoming PC signal The Maintenance Control feature is available only for the displays whose power status i The Input source of Magicl nfo works only on Magicl nfo model The Input source of TV works only on TV model Maintenance Na Lamp Control 1 Click on the Maintenance icon in the Main Icon column to display the Maintenance screen e Multiple Display Control TER File Add a Device Remote Control Safety Lock Fault Device Alert Lamp Control A rm a User Control Mode bevice O Ambient Bnghiness Mode Select All Clear All Refresh Idle Lamp Contra Auto Lamp Control lus EDP i NG e ra ileal TT 7 7 z F l Tu EERDE Apply Manual Lamp Control a k j 3 Ambient Light Referente Apply Lamp Vawe 0 An Info Grid showing
2. RJ45 MDC MDC PORT MDC Multiple Display Control Program Port Connect the LAN cable to RU45 MDC on the product and LAN on the PC To use an MDC the MDC Program must be installed on the mh BLE tt LO Note 4 Go to Multi Control and select RJ45 MDC Gap as the MDC Connection RS232C OUT IN RS232C Serial PORT MDC Multiple Display Control Program Port Connect a serial cable cross type to RS232C on the product and RS232C on the PC To use an MDC the MDC Program must be installed on the PC Note Go to Multi Control and select RS232C MDC as the MDC Connection RGB OUT Magiclinfo video output port MAGICINFO OUT This is the output terminal for the video au hee ee dio and control signals of Magicinfo It can be used by connecting it to the HDMI IN 2 MAGICINFO terminal using a DP to HDMI cable 17 LAN LAN Connection Terminal Connects to a LAN cable to allow Internet or network access in Magiclnfo mode USB USB Connection Terminal Introduction Keyboard Mouse Mass Storage Device Compatible Kensington Lock slot A Kensington Lock is an anti theft device that enables users to lock the product so that they can safely use it in public locations Since the shape and usage of the locking device may differ depending on the model and the man ufacturer for more information refer to the User Manual supplied with the locking device for more information Note
3. Adjust the computer resolution and screen injection rate refresh rate on the computer as described below to enjoy the best picture quality You can have an uneven picture quality on screen if the best picture quality is not provided for TFT LCD e Resolution 1366 x 768 e Vertical frequency refresh rate 60 Hz TFT LCD panels manufactured by using advanced semiconductor technology with a precision of 1ppm one millionth and above is used for this product But the pixels of RED GREEN BLUE and WHITE Color seem to be bright sometimes or some of black pixels could be seen This is not from bad quality and you can use it without any problems e For example the number of TFT LCD sub pixels contained in this product are 3 147 264 a When cleaning the monitor and the panel outside please apply a small amount of water to a soft cloth Rub softly when cleaning the LCD area If excessive force is applied you may stain tt If you are not satisfied with the picture quality you can get better quality of picture by performing the Auto Adjustment function in display screen that is appeared as window termination button is pressed If there s still noise after the automatic adjustment use the Fine Coarse adjustment function D When viewing a fixed screen for an extended period of time a residual image or blurriness may appear Change the mode to energy save or set a screensaver to move the picture when you need to be away from the mo
4. Custom Off On SRS TS XT is a patented SRS technology that solves the problem of playing 5 1 multichannel content over two speakers TruSurround XT delivers a compelling virtual surround sound experience through any two speaker playback system including internal television speakers It is fully compatible with all multichannel formats 1 Off 2 On Sound Select bi Mode Custom Auto Volume SRS TS AT Speaker Select Sound Reset ma Move BE O Return Custom Off Off Sub Enable the sound of either the primary or secondary display in PIP mode Note Available when PIP is set to On 1 Main 2 Sub Speaker Select L4 Las Mode Custom Auto Volume SRS TS AT Sound Reset Custom Extemal Adjusting the LCD Display When you use the product with it connecting to a Home Theater turn the internal soeakers off so you can listen to sound from the Home Theater s external speakers 1 Internal Sound is outputted both from the Internal speaker and the External speakers but the volume control is only available from the Internal speaker 2 External When sound is only outputted from the External speakers the volume control is also only available from the External speakers Sound Reset Z mM Reset sound settings Yes Ma Reset the sound settings Setup Available Modes L PC DVI DisplayPort gt Elav 5 Component gt HDMI M Magicinf
5. Je Info Grid shows some basic information necessary to Image Size Control 1 To adjust Image Size in TV AV S Video Component HDMI1 HDMI2 or DTV mode click the Video Source tab Select the display you want to adjust by using the Select button or by checking the checkbox 2 Info Grid displays only the display having TV AV S Video Component HDMI1 HDMI2 or DTV as input source 3 Switch Image Size of the selected display randomly 4 The screen modes can only be adjusted when a TV PAL only is connected and the Image Size item is set to Auto Wide k HDMI2 may not be supported depending on the product amp Custom may not be supported depending on the product Auto Wide Zoom1 and Zoom2 are not available for selection when the input signal type for Component and DVI HDCP is 720p or 1080i The Auto Wide mode is available only for TV AV and S Video k The Input source of Magicl nfo works only on Magicl nfo model amp The Input source of TV works only on TV model k The I mage Size Control feature is available only for the displays whose power status is ON Time 1 Click Time of the main icons and the Time Control screen appears Multiple Display Control Fila Remote Control SafetyLock Port Selection Lamp Control Options Help Clear Refresh Sot Clock Kamilh Day Year Haan Pinuna ABA PA joo Kg limar Timeri Inactivated Activate Timer Inactivated Activate Timer Inactivate
6. Temperature Control Fan Control Manual Fan Speed Setting 17 Detects the product s internal temperature and specifies the desired temperature The product is set to 77 C by default Note e The picture will be dimmed if the temperature exceeds the specified temperature and the product will automatically power off to prevent overheating if the temperature keeps rising e Itis best to use the product at temperatures 75 80 C based on ambient temperature of 40 C Refer to Specifications herein for details about operating conditions e Itis best to set Fan Control to Auto when you change the Temperature Control setting Current Temperature Fan Control Manual Fan Speed Setting ay Temperature Control Current Temperature Shows the current temperature of the product Adjusting the LCD Display Auto Power Fan amp Temperature Button Lock ia User Auto Color Standby Control Auto Lamp 5chedule OSD Display Enables or disables Auto Power for the product e Off e On Note When Auto Power is On the product will power on automatically as soon as it is connected to power Button Lock Fan amp Temperature Auto Power OHF User Auto Color On Standby Control Auto Lamp 5chedule O5D Display Locks or unlocks the monitor control buttons on the product e Off e On User Auto Color 1 Auto Color Auto Color Reset Automatically adjusts the Colors
7. File Remote Control Safety Lock Port Selection Lamp Control Options Help kakatanong aan Select Clear 5 Refresh System kaa oO oo pi E D ap Video Wal Video Wall 4 Input Source image Size q i sp 1 Video Wall A Video Wall is a set of video screens that are connected together so that each screen shows a part of the whole picture or so that the same picture is repeated on each screen 2 Video Wall Control Video Wall properties can be configured g a MOC Video Wall _ Video Wall On Horizontal Vertical 1 On Off Turns on off the Video Wall function of the selected display 2 Format The format can be selected to see a divided screen e Full e Natural 3 Video Wall Screen divider The screen can be divided into You can select a number of screens with a different layout when dividing e Select a mode from Screen divider e Select a display from Display Selection e The place will be set up by pressing a number in the selected mode e The maximum number of monitors that can be arranged Horizontal X Vertical 100 e Up to 15 monitors can be arranged in a row The maximum value for Horizontal is 6 if Vertical is set to 15 while the maximum value for Vertical is 6 if Horizontal is set to 15 4 Viewing Screen Splits You can view and change the layout of screens using the Screen Divider settings The range of the Screen Divider setting may differ dep
8. e The following table lists possible problems and their solutions Before calling for assis tance check the information in this section to see if you can remedy any problems for yourself If you do need assistance please call the phone number on the Information section or contact your dealer e For more network related information refer to the Magiclnfo Troubleshooting section Problems related to the Installation Note Problems related to the LCD Display installation and their solutions are listed Q The LCD Display screen flickers A Troubleshooting Check if the signal cable between the computer and the LCD Display is securely con nected Refer to Connecting a Computer Problems related to the Screen Note Problems related to the LCD Display screen and their solutions are listed Q A gt gt O 5 QO gt O F 5 5 O O The screen is blank and the power indicator is off Ensure that the power cord is firmly connected and the LCD Display is on Refer to the Connecting a Computer No signal message Ensure that the signal cable is firmly connected to the PC or video sources Refer to the Connecting a Computer Ensure that the PC or video sources are turned on Not Optimum Mode message Check the maximum resolution and the frequency of the video Adaptor Compare these values with the data in the Preset Timing Modes Chart The picture rolls vertically Check if the signal cable
9. 3 When cleaning the product disconnect the power cord and clean it with a soft dry cloth e Do not use chemicals such as wax benzene alcohol thinner mosquito repellant lubricant or cleaner These may change the appearance of the product surface and peel off the indica tion labels on the product 3 Since the product housing is easily scratched make sure to use the specified cloth only 3 When cleaning the product do not spray water directly onto the main body of the product e Ensure that water does not enter the product and that it is not wet e Otherwise this may result in electric shock fire or a malfunc tion L The product is a high voltage product Do not disassemble re pair or modify the product yourself e Otherwise this may result in electric shock or fire If the product needs to be repaired contact a Service Center 3 If there is a strange smell or a strange sound or smoke is coming from the product disconnect the power plug immediately and con tact a Service Center e Otherwise this may result in electric shock or fire Safety Instructions L Do not place this product in a location exposed to moisture dust smoke water or in a Car e Otherwise this may result in electric shock or fire L When you drop the product or the case is broken turn the power off and disconnect the power cord Contact a Service Center e Otherwise this may result in electric shock or fire 3 If thunder
10. A Note Not available when Dynamic Contrast is set to On 1 Off 2 Cool2 3 Cool1 4 Normal 5 Warm1 6 Warm2 pa Note e f you set the Color Tone to Cool2 Cool1 Normal Warm1 or Warm2 the Color Temp function is disabled e Changing a setting in the Color Tone menu will switch the screen mode to Custom Color Temp LHI el Color temp is a measure of the warmth of the image Colors Adjusting the LCD Display Note This function is enabled when Mode is set to Custom and Dynamic Contrast and Color Tone are Off Size A EE coml P s ooms 4 3 Custom The Size can be switched PC mode PC HDMI PC Timing 16 9 4 3 Video mode HDMI Video Timing AV or Component 16 9 Zoom1 Zoom2 4 3 Screen Fit Custom 1 16 9 Sets the picture to 16 9 wide mode 2 Zoom 1 Magnifies the size of the picture on the screen 3 Zoom 2 Magnifies the size of the picture more than Zoom 1 4 4 3 Sets the picture to 4 3 normal mode 5 Screen Fit Displays the input scenes as they are without any cutoff when HDMI 720p 1080i 1080p signals are input 6 Custom Changes the resolution to suit the user s preferences pa Note e Certain external devices may feed the display an out of spec signal that may cause cutoff even when using the Screen Fit feature e Screen Fit is enabled for only 1080i p in Component mode and for 1080i p or 720p in HDMI mode e Zoom 1 and Zoom
11. Connect the product to a computer via a digital signal such as DVI or HDMI Click the BMP image file converted from an SW code The image below will appear on the screen of the product While a BMP image onto which the software code has been converted is displayed on the screen select Software Upgrade Note When there are two or more BMP images they are displayed on the screen using a slideshow e It is recommended that the playback interval between two BMP images in the slide show should be one second The image extraction probability will decrease with other playback intervals e A BMP image might not be extracted if it is covered by another image for example the mouse pointer If a more recent version than the current software version is detected you will be asked whether to upgrade the current software If you select lt Yes gt the upgrade is performed 4 When the software upgrade is completed the product is turned off and on automatically ea ee PvE Cae SS An 5 Fan amp Temperature Auto Power Off Upgrade is completed Power will be off and tumed on automatically OK OSD Display marcas AE AA ae Note This only operates with a digital signal such as in DVI HDMI1 or HDMI2 mode The input resolution must be identical to the panel resolution In HDMI1 and HDMI2 modes the timing values used for both the PC and TV are only supported if the Edit Name is set to PC or DVI PC This is only su
12. Introduction A LCD Display B Wall Bracket C Wall Wall Bracket Angle Adjustment Adjust the bracket angle to 2 before installing it on the wall 2 0 5 0 m 3 2 0 ag 1 Fix the product to the wall bracket 2 Hold the product at the top in the center and pull it forward direction of the arrow to adjust the angle Note You can adjust the bracket angle between 2 and 15 Make sure to use the top center and not the left or the right side of the product to adjust the angle Introduction Remote Control RS232C Cable connections interface RS232C 9 pin pin TxD No 2 RxD No 3 GND No 5 Bits rate 9600 bps Data Bits 8 bit Parity None Stop Bits 1 bit Flow control None Maximum length 15 m only shielded type e Pin assignment Pin Signal Data Carrier Detect Received Data Transmitted Data Data Terminal Ready Signal Ground Data Set Ready Request to Send Clear to Send Ring Indicator O O Nf D OA B D N e RS232C cable Connector 9 pin D Sub Cable Cross reversed cable p1 P1 P2 P2 FEMALE Rx Sse gt 3 Rx FEMALE Introduction Tx 3 lt a 2 Tx Gnd Oo eee 5 Gnd e Connecting method ug NG os ba ee ba ua Control codes e Get control CheckSum e Set control Header command KI CheckSum OxAA command 1 Value type e commanding words 8 input source conor log ho screen Mode control foie 7 Jawo adustment contol Joso o 8 Video wall
13. Se ee a i ey Se ee i eee eee ee ee ee Ros saa paa AAP MASA ANN ag os es ey r ed bu er ma ee mag eee AA 4 Click Advanced Settings Moret Dang Be Kora ba makeh pou eer L plaig Monitor on AA Gefore iG LE fheir Cp F 5 Click Properties in the Monitor tab If the Properties button is deactivated it means the configuration for your monitor is completed The monitor can be used as is Using the Software If the message Windows needs is displayed as shown in the figure below click Continue Mirae Tait a Ganang PrP Mantan Cire Hwi Sak NPA Sree neinet rate mit zj 2 pide modes hal Pa mariar Carrot apiy i monitor cannot daplay cometi y Thee muy aad ko an usable Saga adio daneg hardware Note This monitor driver is under certifying MS logo and this installation will not damage your system The certified driver will be posted on Samsung Monitor homepage Click Update Driver in the Driver tab aa PADA GeFweo BONO LE Pikot Gama mira aiai Peedi pote AA paie ee PEPP DE te To aa iha Greer piee Agr ha daga She daa Pa afer updates thee dir ral back NG ai imran related Per Chapin Ta pabata danica Tiuri Ba door Ara Check the Browse my computer for driver software checkbox and click Let me pick from a list of device drivers on my computer a a a Hina O A i A oe here poe Grosse bor dre potter on Paar gogan Terst m deen
14. The color and the appearance may differ depending on the product and the specifications are subject to change without prior notice to improve the performance Safety Instructions Notational Power Note These safety instructions must be followed to ensure your safety and prevent property dam age Make sure to read the instructions carefully and use the product in the correct manner O Warning Caution Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment DO Note S Prohibited Do not disassemble Q Do not touch Important to read and under stand at all times Disconnect the plug from the outlet Ground to prevent an electric shock When not used for extended period of time set your computer to DPM If using a screen saver set it to active screen mode The images here are for reference only and are not applicable in all cases or countries Shortcut to Anti Afterimage Instructions L Do not use a damaged power cord or plug or a damaged or loose power outlet e Otherwise this may result in electric shock or fire 3 Do not touch the power plug with wet hands when removing or plugging the plug into the outlet e Otherwise this may result in electric shock L Make sure to connect the power cord to a grounded power out let e Otherwise it may result in electric shock or personal injury Installation Safety Instructions 3 Ens
15. 2 On Video Wallis 18 UE A Video Wall is a set of video screens connected together so that each screen shows a part of the whole picture or where the same picture is repeated on each screen When the Video Wall is on you can adjust the Video Wall screen setting Note e When Video Wall is running the Size functions are not available e Disabled when PIP is set to On Video Wall TA Off Format Horizontal 1 Vertical a Screen Position Turns Off On the Video Wall function of the selected display Off On e Off e On Adjusting the LCD Display Format Video Wall Horizontal Natural Vertical sil Screen Position The Format can be selected to see a divided screen e Full Provides a full screen without any margins e Natural Displays a natural image with the original aspect ratio intact Horizontal Video Wall Format Vertical Screen Position Sets how many parts the screen should be divided horizontally Fifteen adjustment levels 1 15 Note If Vertical is set to 15 the maximum value for Horizontal is 6 Vertical Video Wall Format Horizontal Screen Position Sets how many parts the screen should be divided vertically Fifteen adjustment levels 1 15 Note If Horizontal is set to 15 the maximum value for Vertical is 6 Adjusting the LCD Display Screen Position The screen can be divided into several images A number of screens can be selected
16. Serial MDC Ethernet MDC 10 If the installation is successfully completed the quick MDC System execution icon will appear on the desktop MDC execution icon may not appear depending on specification of computer sys tem or monitor If that happens press F5 Key Installation Problems The installation of MDC can be affected by such factors as the video card motherboard and the network environment Uninstall The MDC Program can be removed only by using the Add or Remove Programs option of the Windows Control Panel Perform the following steps remove MDC Select Setting Control Panel on the Start menu and then double click Add Delete a Pro gram Select MDC System from the list and then click the Add Delete button F Using Serial MDC M Using Ethernet MDC Multiple Display Control MDC S ystem Introduction RS 232C OUT Paces Med RS 232C Out RS 232C Out RS 232C Out A Multiple Display Control MDC is an application allowing various displays to be easily and simultaneously operated on a PC RS 232C a standard of serial communication is used for the communication between a PC and a display Therefore a serial cable should be connected between the serial port on a PC and the serial port on a display Main Screen Click Start gt Program gt Samsung gt MDC System to start the program Select a set to see the volume of the selected set within t
17. Video Wall Mode Control Introduction e Function Personal Computer converts Video Wall Mode of TV Monitor when Video Wall is ON Only works with TV Monitor where Video Wall is on Does not operate in Magiclnfo e Get Video Wall Mode CheckSum o e Set Video Wall Mode Header command DATA DATA Length CheckSum OxAA Ox5C 1 Video Wall Mode Video Wall Mode Video Wall Mode code to be set on TV Monitor 1 Full O Natural Ack Header COM DATA Ack Nak r CMD Valt mand Length Check Sum Video Wall Mode same as above Nak com DATA um ERR Error code that shows what occurred error is e Safety Lock e Function Personal Computer turns Safety Lock function of TV Monitor ON OFF Can operate regardless of whether power is ON OFF Introduction e Get Safety Lock Status CheckSum a e Set Safety Lock Enable Disable Length CheckSum Safety Lock Lock code to be set on TV Monitor 1 ON 0 OFF e Ack Header COU DATA ack Nak r CMD val mand Length Check Safety Lock Same as above Sum 3 A oxp Safety Lock e Nak Header SOU DATA ack Nak r CMD Valt mand Length Check Sum OxAA OxFF 3 N ox5p Safety Lock ERR Error code that shows what occurred error is Connections Connecting a Computer There are several ways to connect the computer to the monitor Choose one from the following options 1 1 Using the D su
18. and the default settings will be displayed if all monitors are selected by clicking All and Select If a value is changed in this screen the current mode will automatically switch to custom mode 1 Picture Available only for TV AV S Video Component HDMI1 HDMI2 DTV 2 Contrast Adjusts Contrast of the selected display 3 Brightness Adjusts Brightness of the selected display 4 Sharpness Adjusts Sharpness of the selected display 5 Color Adjusts Color of the selected display 6 Tint Adjusts Tint of the selected display Available only for NTSC 7 Color Tone Adjusts the Color Tone for the selected display 8 Color Temp Adjusts the Color Temp for the selected display 9 Brightness Sensor Adjusts the Brightness Sensor for the selected display 10 Dynamic Contrast Adjusts the Dynamic Contrast for the selected display HDMI2 may not be supported depending on the product Brightness Sensor may not be supported depending on the product The Input source of Magicl nfo works only on Magicl nfo model Color Temp is only enabled if the Color Tone is set to Off The Input source of TV works only on TV model This feature is available only for the displays whose power status is ON and if no selection is made the factory default is displayed Picture PC 1 Click Settings of the main icons and the Settings Control screen appears Multiple Display Control File Remote Control Saf
19. 2 Reset Resets the Color settings Adjusting the LCD Display Note Enabled only in PC mode Standby Control Fan amp Temperature Auto Power Button Lock User Auto Color Lamp 5chedule O5D Display Sets the standby mode which will be activated when no input signal is detected e Off A message will read No Signal if no input signal is detected e On Power saving mode will be activated if no input signal is detected e Auto When no input signal is detected Power saving mode will be activated if an external device is connected A message will read No Signal if no external device is connected Note e Enabled only in PC DVI HDMI or DisplayPort mode e Auto will be disabled in HDMI mode Lamp Schedule Lamp Schedule On 2d Hour Minute am pm Lamp O Schedel 10o w Schedule 2 100 Adjusts the luminance to a user specified value at a specified time OSD Display Displays or hides a menu item on the screen Source OSD e Off e On Not Optimum Mode OSD Off e On No Signal OSD e Off e On MDC OSD e Off Adjusting the LCD Display Not Optimum Mode OSD No Signal OSD MDC OSD Source OSD No Signal OSD MDC 05D pn i a papag pi JEM Source USD Not Optimum Mode OSD MDC OSD Source OSD Not Optimum Mode OSD No Signal OSD Off OF OFF Off ff Adjusting the LCD Display On Software Upgrade Performs a software upgrade 1
20. 2 are disabled for HD signals 1080i p 720p or 768p e The Position and Reset functions are available in Zoom 1 or Zoom 2 modes Digital NR Digital Noise Reduction 8 Mode Custom Custom Color Tone Normal Size More Adjusting the LCD Display Turns the Digital Noise Reduction feature Off On The Digital Noise Reduction feature allows you to enjoy clearer and crisper images 1 Off 2 On Note Digital NR function is not available for all resolutions HDMI Black Level ss 3 Mode Custom Custom Color Tone Normal Size 16 9 Digital NR More a HN al cater Sen When a DVD or set top box is connected to your product via HDMI or DVI port it may cause a degradation in the screen quality such as an increase in the black level a low contrast or discoloration etc depending on the external device connected In this case adjust the screen quality of your product by configuring the HDMI Black Level 1 Normal 2 Low nan E Note For Timing which can be used for both the PC and the DTV in HDMI and DTV mode HDMI Black Level will be activated Film Model 8 Dynamic Contrast Off Lamp Control 100 Brightness Sensor Off Picture Reset Film Mode calibrates unnatural picture when watching a movie 24 frames played ona TV 30 frames Moving subtitles may appear corrupted when this mode is enabled In HDMI mode this function is available when the input signal is i
21. 75 062 100 000 VESA 640 x 480 37 861 72 809 31 500 VESA 640 x 480 37 500 75 000 31 500 VESA 800 x 600 35 156 56 250 36 000 VESA 800 x 600 37 879 60 317 40 000 VESA 800 x 600 48 077 72 188 50 000 VESA 800 x 600 46 875 75 000 49 500 VESA 848 x 480 31 020 60 000 33 750 VESA 1024 x 768 48 363 60 004 65 000 VESA 1024 x 768 56 476 70 069 75 000 VESA 1024 x 768 60 023 75 029 78 750 VESA 1152 x 864 67 500 75 000 108 000 VESA 1280 x 768 47 776 59 870 79 500 VESA 1280 x 960 60 000 60 000 108 000 VESA 1280 x 1024 63 981 60 020 108 000 VESA 1280 x 1024 79 976 75 025 135 000 VESA 1360 x 768 47 712 60 015 85 500 VESA 1366 x 768 47 712 59 790 85 500 Specifications Display Mode Horizontal Vertical Fre Pixel Clock Sync Polarity Frequency quency Hz MHz H V kHz VESA 1600 x 1200 75 000 60 000 162 000 VESA 1920 x 1080 67 500 60 000 148 500 Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle and the inverse number of the Hor izontal Cycle is called the Horizontal Frequency Unit kHz Vertical Frequency Like a fluorescent lamp the screen has to repeat the same image many times per second to display an image to the user The frequency of this repetition is called the Vertical Frequency or Refresh Rate Unit Hz Information For a Better Display
22. CH P A TV MENU O RETURN g EXIT Magjiclnfo Turns the product On Off Turns the product Off Used to enter the password during the OSD adjustment or to use Magiclinfo Press to change the channel The button is used to select Digital channels Electronic Program Guide EPG display O VOL source om D MENU OF toois O Up Down Left Right but tons i INFO D The Color button and the PC DVI HDMI DP selection button O SICA TTXMIX 13 MTS DUAL Introduction Note This button can only be used in TV mode while a TV tuner box sold separately is connected Adjusts the audio volume Selects a connected external input source or Magiclnfo mode Press the button to change the input signal SOURCE Changing the SOURCE is only allowed for external devices that are connected to the LCD Display at the time DTV menu display Note This button can only be used in TV mode while a TV tuner box sold separately is connected Use to quickly select frequently used functions Note This function does not work for this LCD Display Moves from one menu item to another horizontally vertically or adjusts selected menu values Current picture information is displayed on the upper left corner of the screen In TV mode these buttons can be used to configure a list of channels You can select the PC DVI HDMI or DisplayPort external input directly in a mode other than TV
23. Pi Color Tone 9 j Color Temp Brightness Sensor 10 Dynamic Contrast Basic information required to adjust settings is displayed Settings for the corresponding SET will be and displayed on the slider if a display ID is selected and the default settings will be displayed if all are selected by clicking All and Select If a value is changed in this screen the current mode will aut switch to custom mode 1 Picture PC Available only for PC BNC DVI and DP 2 Contrast Adjusts Contrast of the selected display 3 Brightness Adjusts Brightness for the selected display 4 Red Adjusts red Color of the selected display Available only for NTSC 5 Green Adjusts green Color of the selected display Available only for NTSC 6 Blue Adjusts blue Color of the selected display Available only for NTSC 7 Color Tone Adjusts the Color Tone for the selected display 8 Color Temp Adjusts the Color Temp for the selected display 9 Brightness Sensor Adjusts the Brightness Sensor for the selected display 10 Dynamic Contrast Adjusts the Dynamic Contrast for the selected display Brightness Sensor may not be supported depending on the product The Input source of Magicl nfo works only on Magicl nfo model The Input source of TV works only on TV model Color Temp is only enabled if the Color Tone is set to Off This feature is available only for the displays whose power status is ON and if
24. Safety Screen or Bo Be E Interwal Dime Apply Safety Screen 1 Scroll This function is used to remove the afterimages that occur when a still screen is displayed on the selected display for a long time 2 Pixel Shift This allows the screen to be moved finely at the specified time interval 3 Safety Screen The Safety Screen function is used to prevent afterimages from occurring when a still screen is displayed on the monitor for a long time The Interval item is used to set the repetition cycle in hour units and the Time item is used to set the time when the Safety Screen function must be performed The Type item can be set to Scroll Pixel Bar Eraser All White or Pattern 4 Safety Screen This function is used to prevent afterimages from occurring There are five 5 types that you can select and control with this function For the Scroll type the Time item can be set to 1 2 3 4 or 5 For the Bar and Eraser types it can be set to 10 20 30 40 or 50 For the All White and Pattern type it can be set to 1 5 10 20 or 30 The Input source of Magicl nfo works only on Magici nfo model The Input source of TV works only on TV model The Maintenance Control feature is available only for the displays whose power status is ON gh Maintenance Ww Video Wall 1 Click on the Maintenance icon in the Main Icon column to display the Maintenance screen us i i Multiple Display Control
25. Size can be controlled with turning on the LCD Display power The Input source of TV works only on TV model 3 The Input source of Magicl nfo works only on Magicl nfo model NG PIP PI P Source 1 Click PIP of the main icons and the PIP control screen appears Multiple Display Control 4 x File Add a Device Remote Control SefetyLock Faul Device Alet Lamp Control PAPA Faulty Device 0 Select All Clear All Refresh idle ros PIP Source 1 ETLEZat ScSl Set S esti h bale esew Sitst PIP Size sja a aa EG Pa Ta E _ ULL All Input av 7 SVideo Componer 9 j HDM 10 HOMIZ ki HAT Je Info Grid shows some basic information necessary to PIP Source Control 1 PIP Source PIP Source can be controlled with turning on the LCD Display power 2 PC Changes the source of the PIP of the selected display to PC 3 BNC Changes the source of the PIP of the selected display to BNC 4 DVI Changes the source of the PIP of the selected display to DVI 5 TV Changes the source of the PIP of the selected display to TV 6 DTV Changes the source of the PIP of the selected display to DTV 7 AV Changes the source of the PIP of the selected display to AV 8 S Video Changes the source of the PIP of the selected display to S Video 9 Component Changes the source of the PIP of the selected display to Component 10 HDMI1 HDMI2 Changes the source of the PIP of the
26. TV AV S Video Component HDMI1 HDM12 DTV 2 Contrast Adjusts Contrast of the selected display 3 Brightness Adjusts Brightness of the selected display 4 Sharpness Adjusts Sharpness of the selected display 5 Color Adjusts Color of the selected display 6 Tint Adjusts Tint of the selected display Available only for NTSC 7 Color Tone Adjusts the Color Tone for the selected display 8 Color Temp Adjusts the Color Temp for the selected display 9 Brightness Sensor Adjusts the Brightness Sensor for the selected display 10 Dynamic Contrast Adjusts the Dynamic Contrast for the selected display Brightness Sensor may not be supported depending on the product The Input source of Magic nfo works only on Magici nfo model Color Temp is only enabled if the Color Tone is set to Off The Input source of TV works only on TV model This feature is available only for the displays whose power status is ON and if no selecti made the factory default is displayed HDMI2 may not be supported depending on the product ah i Yi m Setting Picture PC 1 Click Settings of the main icons and the Settings Control screen appears Multiple Display Control ka X File AddaDewce Remote Control SetetyLock Fault Device Alert Lamp Control Help SAMSUNG Diani Faulty Device U SelectAll Clear All Refresh _ idle 2 PC BNC DVI DP 2 Contra Ab ees _ o 5 Blug
27. Y Pg jacks on the Set Top Box Connect a set of audio cables between the AV COMPONENT AUDIO IN R AUDIO L on the LCD Display and the AUDIO OUT jacks on the Set Top Box Note e Press SOURCE on the product or remote control and select Component e For an explanation of Component video see your Set Top Box owner s manual Connections Connecting to an Audio System 1 Connect a set of audio cables between the AUX L R jacks on the AUDIO SYSTEM and AUDIO OUT on LCD Display Connecting to MAGICINFO OUT Connect the MAGICINFO OUT terminal and the HDMI IN 2 MAGICINFO terminal on the product using the DP to HDMI cable Connections Connecting a LAN Cable Connect the LAN cable between the LAN port on the product and the LAN port on your PC Connecting a USB devices You can connect USB devices such as a mouse or keyboard Using the Software Monitor Driver Note When prompted by the operating system for the monitor driver insert the CD ROM included with this monitor Driver installation is slightly different from one operating system to another Follow the directions appropriate for the oper ating system you have Prepare a blank disk and download the driver Program file at the Internet web site shown here Internet web site http www samsung com Installing the Monitor Driver Automatic 1 Insert CD into the CD ROM drive 2 Click Windows 3 Choose your monitor mode
28. You must purchase the Kensington Lock separately To lock the product follow these steps 1 Wrap the Kensington lock cable around a large stationary object such as a desk or chair 2 Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable 3 Insert the Kensington Lock into the se curity slot F on the back of the dis play 4 Lock the lock CN Note e These are general instructions For exact instructions see the User Manual sup plied with the locking device e You can purchase the locking device from an electronics store an online shop or our service Center Note The power switches of both of the monitor and the network box must be turned on for the network box to operate normally Remote Control Note Introduction e The performance of the remote control may be affected by a TV or other electronic device operating near the LCD Display causing a malfunction due to interference with the fre quency e A TV tuner box sold separately must be connected to use the TV US Only SAMSUNG power O Oorr Number Buttons GUIDE button eee e 0800 eseooegoqooddd oo power Corr Number Buttons GUIDE button VOL SOURCE 1 D MENU a TOOLS Up Down Left Right buttons 1 INFO The Color button and the PC DVI HDMI DP selection button L TTX MIX MTS DUAL 29 ENTER PRE CH cK MUTE v
29. adjust the resolution Windows XP Set the resolution in the Control Panel Appearance and Themes Display Set tings A Windows ME 2000 Set the resolution in the Control Panel Display Settings Contact the video card manufacturer for details Q How can set the Power Saving function Windows XP Control Panel Appearance and Themes Display Enable the powersaving fea ture in Screen Saver Set the function in the BIOS SETUP of the computer Refer to the Windows Computer Manual A Windows ME 2000 Control Panel Display Screen Saver Set the function in the BIOS SETUP of the computer Refer to the Windows Computer Manual Q How can ll clean the outer case LCD Panel Disconnect the power cord and then clean the LCD Display with a soft cloth using either a cleaning solution or plain water Do not leave any detergent or scratches on the case Do not let any water enter the LCD Display Q How can play the video The video supports the MPEG1 and WMV codecs only Install the corresponding codec to play the video Note that some of the codecs can be incompatible Note Before calling for assistance check the information in this section to see if you can remedy any problems yourself If you do need assistance please call the phone number on the In formation section or contact your dealer Specifications General Model Name 320TSn 3 LCD Panel Size 31 5 inch 80c
30. damage to the prod uct Introduction Package Contents Checking the Contents of the Package Note e After unpacking the package make sure to check the contents of the package e Store the packaging box in case you need to move the Product later e lf any items are missing contact your dealer e Contact a local dealer to purchase optional items Unpacking LCD Display Manuals Quick Setup Guide Warranty Card User Manual Not available in all loca tions Magiclnfo Software DVD Cables Power Cord D Sub Cable Introduction Others Remote Control Batteries AAA X 2 BP59 00138B Not available in all loca tions Sold separately T Semi Stand KIT USB Cable RGB to BNC Cable RGB to COMPONENT Ca TV tuner box US Only ble Wall Mount KIT RS232C Cable Note Accessories that can be purchased with the product vary by country Your LCD Display The color and the appearance may differ depending on the product and the specifications are subject to change without prior notice to improve the performance Front Introduction MENU button MENU Opens the on screen menu and exits from the menu Also use to exit the OSD menu or return to the previous menu Navigate buttons Up Down buttons Moves from one menu item to another vertically or adjusts selected menu values Adjust buttons Left Right buttons Volume buttons Moves from one menu item to another horizontally or adj
31. e Function Introduction Personal Computer recognizes the screen size of TV Monitor e Get Screen Size Status CheckSum aNG e Ack Header COM DATA ack Nak r CMD Val mand Length Check Sum Size Screen Size Screen Size of TV Monitor Range 0 255 Unit Inch e Nak com DATA erie ne o oh an pee Check um ECNE A ERR Error code that shows what occurred error is e PIP ON OFF Control e Function The PC turns the PIP function of a TV or Monitor ON OFF This does not operate in Magiclnfo mode e Get the PIP ON OFF Status CheckSum _ e Set the PIP ON OFF Length CheckSum 4 f PB OxAA 0x3C PIP The PIP ON OFF code to set for the TV or Monitor 1 PIP ON 0 PIP OFF e Ack Introduction paang DATA DFA Length On Nax Check um PIP Same as above Ce a pos pp e Nak Sane DATA ete o Length Ae Nak Check um ERR Error code that shows what occurred error is Auto Adjustment Control PC BNC Only e Function Personal Computer controls PC system screen automatically e Get Auto Adjustment Status None e Set Auto Adjustment Header command DATA DATA Length CheckSum 1 Auto Adjust ment Auto Adjustment 0x00 Always Ack Header COM DATA Ack Nak r CMD Val1 mand Length Check Sum OxAA OxFF 3 7 ox3D Auto Ad justment DATA Length ne Sum ERR Error code that shows what occurred error is
32. eo n Bes m Farn Charth dutenai fee opiata drier sahai p Firipa md peer h pee eee mal Se heri Pe Tor Lir ee a San par ive F roande nobena Leute Stal et ee Paan kad ore peck bom a lint of Grice driven on My computer Tina lel ar heen rede Bee Phe pede ee Po dee r aral all dover naga m ibr ar irgo m r iraa Click Have Disk and select the folder for example D Drive where the driver setup file is located and click OK Using the Software bakas mgka at ha cored dire ip misdled bakya PG you aar in ined ee thig handanin ea et Pa ea gba kin uted re er An aaa Pring bara d dak heil aa Pah eee ping mid ad ee d hya ee ae Haze DJ Te ie EE PAS 9 Select the model that matches your monitor from the list of monitor models on the screen and click Next Select the dewice driver you wart te iptal fee thia harehwate ab Pa Sidia deed Sije pa Paani deed peed Poe cen baa pa E raada aan eae he ee a a kh Harg Da BE AP Barang saa i Aka hat mne upeaind your dhe sofware trates Aue Kahan od mrg Far deren eee ee ka ba gh Ng Sarung batan ia i ti Top an ei lin Pag Bes Tip napala a aa a a bat a capac Len an panang Pa eve all De pi TE ay ee PG Cpa ae a a Tagal Na eee aa Bayi Color Management Martyr Type H Drag the icons to match your monitor biomi atong Screen refresh raba 50 Heritz Gf pode modes that the monitor cannot daplay
33. function of all displays is initialize Enable when the MDC is closed Add a Device Mulliple Wisplay Control BS XK Fie AddeaDevice Remote Control SefetyLock Fault Dewice Alet Lamp Control Help shaituaan paaa Faulty Device U Idle Add a Device Power Of Device IP Address 1 Enter the IP address of the monitor to be connected and press the Add button to add the IP addres click the OK button adding the monitor is completed System 1 Click System in the main menu to open the system adjustment screen Multiple Display Control ial x Fie AddaDevice Remote Control SafetyLock FoultDewceAlent Lamp Control Help oiaseuen tagas a Faulty Device U Select All Clear All Refresh idle Power On Power Of Volume 10 EE E 050 Display Source OSD On Not Optimum Mode OSD On No Signal OSD On S e ee a oe B ese On O Ye Info Grid shows some basic information necessary to System 1 Power Status 2 Input 3 Image Size 4 On Timer 5 Off Timer 2 Selects displays you want to adjust using the Select All button or checkboxes Multiple Display Control 4 i File Add a Device Remote Control Safety Lock Fault Device Alert Lamp Control Help Een Faulty Device U e Select All Clear All Refresh idle Power On Power Off i 3 Volume 10 OSD Display Source OSD Not Optimum Mode OSD No Signal OSD MOC OSD Je W Sys
34. information necessary to Image Size Control 1 El Power Status Shows the power status of the current display 2 Image Size Shows the current Image Size of the display in use 3 Input Info Grid displays only the displays whose Input Source is PC BNC DVI and DP 4 PC Source Click Image Size in the main menu to display the PC BNC DVI and DP tabs The Image Size Control button controls Image Size available for PC BNC DVI and DP 5 Video Source Using the Image Size adjustment button you can adjust the Image Size to a value available in the PC BNC DVI and DP DP may not be supported depending on the product The Input source of Magicl nfo works only on Magicl nfo model The Input source of TV works only on TV model Image Size Control is available only for the displays for which power status is ON KO I mage Size TV AV S Video Component DVI HDCP HDMI 1 HDMI 2 DTV 1 Click Image Size of the main icons and the Image Size control screen appears Multiple Display Control File Remote Control Safety Lock Port Selection Lamp Control Options Hel SAMSUNG DIGITait Refresh Wideo Source 1 TY AV 5 Video Component HOMI1 HOMI DTV Image Size Auto Wide 16 9 Wide Zoom Zoom Zoom 1 Zoom 7 4 3 Screen Fit Wide Fit Custom Zil El m B Li m LI m m ojo ER ioe ai CC ee Ka ee LoL a2 ae a C1 e m ee e e ae A ai Mamtenanc
35. is securely connected Re connect it if necessary Refer to Connecting a Computer The image is not clear picture is blurred Run Frequency Coarse and Fine tuning Turn on again after removing all accessories video extension cable etc Set the resolution and frequency to the recommended ranges The picture image is unstable and shakes Check if the resolution and frequency set for the computer video card falls in the range supported by the LCD Display If not reset them referring to the current Information under the LCD Display menu and Preset Timing Modes Ghost images are shown in the picture Check if the resolution and frequency set for the computer video card falls in the range supported by the LCD Display If not reset them referring to the current Information under the LCD Display menu and Preset Timing Modes The image is too light or too dark Adjust the brightness and contrast Refer to the Brightness Contrast O gt OF OF Ds p Troubleshooting The screen Color is inconsistent Adjust the Color Control option in the OSD adjustment menu The Color image is distorted by dark shadows Adjust the Color Control option in the OSD adjustment menu The Color white is poor Adjust the Color Control option in the OSD adjustment menu The Power Indicator blinks The LCD Display is currently saving the changes made in the settings to the OSD memory The screen is blank and the power indicator light blinks ever
36. of the selected display at a specified time The Manual Lamp Control automatically turns off if you adjust using the Auto Lamp Control Allows you to adjust the backlight of the selected display regardless of the time The Auto Lamp Control automatically turns off if you adjust using the Manual Lamp Control 3 Ambient Light Detects the ambient light intensity at the designated monitor and automatically adjusts the picture brightness You can specify a Reference value and designate a monitor that will automatically determine Lamp Value the light intensity from the lamp based on the ambient light intensity Ambient Light is only supported for models that have a brightness sensor and is only enabled when Ambient Brightness Mode is selected in the Lamp Control menu Auto Lamp Control and Manual Lamp Control are only enabled when User Control Mode is selected in the Lamp Control menu The Maintenance Control feature is available only for the displays whose power status is ON The Input source of Magicl nfo works only on Magici nfo model The Input source of TV works only on TV model Maintenance Ww Scroll 1 Click on the Maintenance icon in the Main Icon column to display the Maintenance screen Multiple Display Control File Remote Control SafetyLock Port Selection Lamp Control Options Help vie Mi Select Idle Refresh 0 Pixel Shift or Be B D Time Harizonila bot Vertical Lite Apply
37. selected display to PC 2 BNC Changes the Input Source of the selected display to BNC 3 DVI Changes the Input Source of the selected display to DVI 4 TV Changes the Input Source of the selected display to TV 10 11 12 DTV Changes the Input Source of the selected display to DTV AV Changes the Input Source of the selected display to AV S Video Changes the Input Source of the selected display to S Video Component Changes the Input Source of the selected display to Component Magicl nfo The Input source of Magiclnfo works only on Magiclnfo model HDMI1 HDMI2 Changes the Input Source of the selected display to HDMI DP Switches the input source for the selected Display to DP Channel Channel arrow appears when the Input Source is TV HDMI2 may not be supported depending on the product amp DP may not be supported depending on the product k TV Source can be selected only in products with TV and controlling channels is allowed only when Input Source is TV The Input Source Control feature is available only for the displays whose power status is ON 55 I mage Size PC BNC DVI DP 1 Click Image Size of the main icons and the Image Size control screen appears Multiple Display Control File Remote Control Safety Lock Port Selection Lamp Control Options Help Select Idle Refresh PE m PC BNC DWI DF 16 9 4 3 Ye Info Grid shows some basic
38. step 2 of Magiclnfo Setup Wizard you don t have to go to Network Setting on the desktop to make your settings for TCP IP You just do that at step 2 of Magiclnfo installation 3 Select Language step 3 ji Magicinfo Setup Wizard v 1 09 m Select Language step 3 Select the language you want to install on the system for menus and dialogs Current language English Chinese Traditional i m al Ga Click lt Back B Mext N gt Finish Cancel When using multiple languages you can choose and set a specific language among them 4 Select Screen Type step 4 Adjusting the LCD Display iis Magicinfo Setup Wizard 7 1 09 Select Screen Tupe step 4 Select Landscape Portrait click Back B Mewt M gt Finish Cancel You can select which rotation type will be applied to your device 5 Setup Information TA Hagicinfo Setup Wizard 1 1 09 Setup Information 1 Application Magiclnfo Pro LAN WAN based version 2 Internet Protocol TCP IP IP 10 58 68 107 3 Language English 4 Screen Type Landscape Do not show again Click lt Back B Cancel Shows the settings that have been selected by the user 7 Note If the Magiclnfo icon is not displayed on the notification area double click the Magiclnfo icon on the window desktop The icon will appear Troubleshooting Self Test Feature Check Note Check the following items yoursel
39. the displays whose power status is ON and if no selection is made the factory default is displayed Settings rr nG I mage Lock 1 Click Settings of the main icons and the Settings Control screen appears Multiple Display Control File Remote Control SafetyLock Port Selection Lamp Control Auto Adjustment Info Grid shows some basic information necessary to Settings Control 1 Image Lock Available only for PC BNC 2 Coarse Adjusts Coarse of the selected display 3 Fine Adjusts Fine of the selected display 4 Position Adjusts Position of the selected display 5 Auto Adjustment Self Adjust to the incoming PC signal The Input source of Magicl nfo works only on Magici nfo model The Input source of TV works only on TV model Settings Control is available only for the displays for which the power status is ON gh Maintenance Ww Lamp Control 1 Click on the Maintenance icon in the Main Icon column to display the Maintenance screen SS Multiple Display Control File Remote Control Safety Lock Port Selection Lamp Control Refresh Lamp Control Auto Lamp Control w kd a Hour Minute ALAT RA Apply Manual Lamp Control 50 _ 3 Ambient Light Reference co Lamp Value O An Info Grid showing several basic data items appears 1 Maintenance Allows the Maintenance Control function for all input sources 2 Lamp Control Automatically adjusts the backlight
40. turn the remote function again to Restore normal functions lt Note gt This program may malfunction due to problems in communication circuits or interference from electronic appliances nearby Please make selection in the l example information grid before controlling M ID Lok mj 4 Settings Value Display In Multiple Display Mode 3 When there are more than one displays connected the settings values are displayed as follows 1 No selection Displays the Factory Default Value 2 Selected one display Fetches and displays the settings value for the selected display 3 Selected one display ID1 and add another display ID3 The program which was displaying the settings value of ID 1 fetches and displays the value of ID3 4 f all sets are selected at the same time by clicking All and Select the default value will be restored Copyright 2003 2010 Samsung Electronics Co Ltd All rights reserved ple Displia MDC Syste Introduction Ethernet RS 232C Out RS 232C Out RS 232C Out Unlike the previous method which used the serial data communication specifications RS 232C an Ethe function has been added Connect the first display device and the PC by entering the IP address To connect to another display use an RS 232C serial cable Refer to the figure above Main Screen oe DI Fe a SS Click Start gt Program gt Samsung gt MDC System to start the program Se
41. 1 1SAMSUNG 1 72 678 http www samsung com http www samsung com 48 22 607 93 33 808 20 SAMSUNG 808 20 http www samsung com 7267 From landline 08010 SAM SUNG 7267864 http www samsung com From landline 4 mobile 40 21 206 01 10 0700 SAMSUNG 0700 726 http www samsung com 7864 0800 SAMSUNG 0800 726 http www samsung com 786 902 1 SAMSUNG 902 172 http www samsung com 678 0771 726 7864 SAMSUNG http www samsung com Appendix Europe SWITZERLAND 0848 SAMSUNG 7267864 http www samsung com ch CHF 0 08 min http www samsung com ch_fr French U K 0330 SAMSUNG 7267864 http www samsung com EIRE 0818 717100 http www samsung com LITHUANIA 8 800 77777 http www samsung com LATVIA 8000 7267 http www samsung com ESTONIA 800 7267 http www samsung com TURKEY 444 77 11 http www samsung com CIS RUSSIA 8 800 555 55 55 http www samsung com GEORGIA 8 800 555 555 http www samsung com ARMENIA 0 800 05 555 http www samsung com AZERBAIJAN 088 55 55 555 http www samsung com KAZAKHSTAN 8 10 800 500 55 500 GSM http www samsung com 7799 UZBEKISTAN 8 10 800 500 55 500 http www samsung com KYRGYZSTAN 00 800 500 55 500 http www samsung com TADJIKISTAN 8 10 800 500 55 500 http www samsung com MONGOLIA http www samsung com UKRAINE 0 800 502 000 http www samsung com ua http www samsung com ua ru BELARUS 810 800 500 55 500 http www samsung com MOLDOVA 00 800
42. 500 55 500 http www samsung com Asia Pacific AUSTRALIA 1300 362 603 http www samsung com NEW ZEALAND 0800 SAMSUNG 0800 726 http www samsung com 786 CHINA 400 810 5858 http www samsung com HONG KONG 852 3698 4698 http www samsung com hk http www samsung com hk en INDIA 1800 1100 11 http www samsung com 3030 8282 1800 3000 8282 1800 266 8282 INDONESIA 0800 112 8888 http www samsung com 021 5699 7777 Appendix Asia Pacific JAPAN 0120 327 527 http www samsung com MALAYSIA 1800 88 9999 http www samsung com PHILIPPINES 1 800 10 SAMSUNG http www samsung com 726 7864 for PLDT 1 800 3 SAMSUNG 726 7864 for Digitel 1 800 8 SAMSUNG 726 7864 for Globe 02 5805777 SINGAPORE 1800 SAMSUNG 726 7864 http www samsung com THAILAND 1800 29 3232 http www samsung com 02 689 3232 TAIWAN 0800 329 999 http www samsung com 0266 026 0666 VIETNAM 1 800 588 889 http www samsung com Middle East IRAN 021 8255 http www samsung com OMAN 800 SAMSUNG 726 7864 http www samsung com KUWAIT 183 2255 http www samsung com BAHRAIN 8000 4726 http www samsung com EGYPT 08000 726786 http www samsung com JORDAN 800 22273 http www samsung com MOROCCO 080 100 2255 http www samsung com SAUDI ARABIA 9200 21230 http www samsung com U A E 800 SAMSUNG 726 7864 http www samsung com Africa CAMEROON 7095 0077 http www samsung com COTE D LVOIRE 8000 0077 http www samsung com GHANA 0800 10077 http w
43. Chearires than check bon apa you epee daplay modes that thig monior cannot display correctly This may lead to an unusabie dawe T This i my main maagor d Extend the desktep onto thm mortor Microsoft Windows XP Operating System Using the Software 1 Insert CD into the CD ROM drive 2 Click Start Control Panel then click the Appearance and Themes icon Pi Piy Deca s a Gevaert Internet Coober La E mail Cg Shit look Kapa 75 rect vo NG Ay Mami aaj Pioto pod Egg He ae W Wara E 2 Piy acest rrime KS Pale BR ores a NEA Printers and Panes gt indo Podio Maro z 2 rite and Support mg Mah Caplorar a Pu Search i indo losis Patol vii EEF mun ps te dal a Binary ir es Ak tasak tek il kasin baras a GG Ga Aij rege as 3 Click Display icon and choose the Settings tab then click Advanced SEEN mm Ba EE f apoi De i an Bi fees Bee CT b beg pag ill a kg f Cheer Gi EF Biga Paas a Dimplaz or pick a Control Panel icon KAG AE n EETA GG sa EP a omaa oe High 32 bit Ka tna 6 EE I EE ca i ann NG re peri jem aa had a TOZA be TEE parola 4 Click the Properties button on the Monitor tab and select Driver tab Plug and Play Monitor and 30 Prophet IH Properties ed eno cor Geforce DD Device Selection aD Color Conection General Adapter Hani Taisubisahast Color Aanagamani crab
44. DMI IN 1 on the product and the HDMI output port on a digital device 2 Press SOURCE on the product or remote control and select HDMI1 HDMI2 Note In HDMI mode only PCM format audio is supported Connections Connecting Using a DVI to HDMI Cable Connect a DVI HDMI cable to HDMI IN 2 MAGICINFO or HDMI IN 1 and the DVI output port on the digital device Connect the red and white jacks of an RCA to stereo for PC cable to the same colored audio output terminals of the digital output device and con nect the opposite jack to the RGB DVI DP HDMI AUDIO IN terminal of the LCD Display 3 Press SOURCE on the product or remote control and select HDMI1 HDMI2 Connecting a DVD Player Pa Pa L R 5 WIDEO COMPONENT AUNO OUT Connect a RGB to Component cable between the RGB COMPONENT IN port on the LCD Display and the Pp Y Pg jacks on the DVD player Connect a set of audio cables between the AV COMPONENT AUDIO IN R AUDIO L on the LCD Display and the AUDIO OUT jacks on the DVD player Connections Note e Press SOURCE on the product or remote control and select Component e Then start the DVD Player with a DVD disc inserted e A RGB to component cable is optional e Foran explanation of Component video consult your DVD manual Connecting a DTV Set Top Cable Satellite Box Connect a RGB to Component cable between the RGB COMPONENT IN port on the LCD Display and the Pp
45. HOMG a Pa ng DP e PC Mode Ye Info Grid shows some basic information necessary to Input Source Control 1 2 10 Multiple Display Control File AddeDevice Remote Control SofetyLock Fault Device Alert Lamp Control Help Select All Clear All Refresh if A ii P _ ros I a CAI BIT Fi Fa a ko F ik Image Size ay k zi h A LI a LIB LI PC Changes the Input Source of the selected display to PC BNC Changes the Input Source of the selected display to BNC DVI Changes the Input Source of the selected display to DVI TV Changes the Input Source of the selected display to TV DTV Changes the Input Source of the selected display to DTV AV Changes the Input Source of the selected display to AV S Video Changes the Input Source of the selected display to S Video Component Changes the Input Source of the selected display to Component Magicl nfo The Input source of Magiclnfo works only on Magicl nfo model HDMI 1 HDMI2 Changes the Input Source of the selected display to HDMI PC A Faulty Device 0 dle Choose Input 5ource A a 2 SNMideo 7 pa Ot Component 6 AN Padaan 9 ha a HOMI 11 DP Switches the input source for the selected display to DP 12 Channel Channel arrow appears when the Input Source Is TV HDMI2 may not be supported depending on the product DP may no
46. Input source of TV works only on TV model Time Control is available only for the displays for which the power status is ON Only enabled for a TV when Source is set to TV in On Time mode Only enabled for a model with Magicl nfo installed when Source is set to Magicl nfo in Or mode PIP Size 1 Click PIP of the main icons and the PIP control screen appears Selects displays you want to adjust using the Select All button or checkboxes Multiple Display Control qa File AddaDewce Remote Control SeletyLock FoultDewceAlet Lamp Control Help a Faulty Device U SelectAll Clear All Refresh idle All Input OFF Tas Large Small Pil hy Double 1 k P Double 2 2 3 4 G Pa m ia J Double 3 a ri r a il i a a Je Info Grid shows some basic information necessary to PIP Size Control 1 PIP Size Shows the current PIP Size of the display in use 2 OFF Turns off the PIP of the selected display 3 Large Turns on the PIP of the selected display and changes the size to Large 4 Small Turns on the PIP of the selected display and changes the size to Small 5 Double 1 Turns on the PIP of the selected display and changes the size to Double 1 6 Double 2 Turns on the PIP of the selected display and changes the size to Double 2 7 Double 3 Picture By Picture Turns on the PBP of the selected display and changes the size to Double 3 PIP
47. Modecom fosc or o S los lp ID should show hexadecimal value of assigned ID but ID 0 should be OxFF Introduction Every communication will be made in hexadecimals and Checksum is the sum of all remainings If it exceeds two digits for example it is 11 FF 01 01 112 discard the number in the first digit like below example PowerOngID 0 paaa CheckSum OxAA Oxtt Oxtt Power Header command DATA DATA 1 Length 12 If you want to control every mechanism connected with Serial Cable regardless of its ID set ID part to OxFE and send commands At the time each product will follow commands but it will not respond with ACK Power Control e Function Personal Computer turns TV Monitor power ON OFF e Get Power ON OFF Status CheckSum o e Set Power ON OFF CheckSum Power Power Power code to be set on TV Monitor 1 Power ON 0 Power OFF DATA a ER Sea piesa Check um OxAA OxFF Power Same as above com DATA Check D Length ee Sum Introduction ERR Error code that shows what occurred error is Volume Control e Function Personal Computer changes volume of TV Monitor e Get Volume Status CheckSum par e Set Volume Header command DATA DATA CheckSum OxAA Oxt2 o2 Volume Volume Volume value code to be set on TV Monitor O 100 com DATA um Volume Same as above TER DATA CE Length Ae
48. Nak Check um ERR Error code that shows what occurred error is Input Source Control e Function Personal Computer changes input source of TV Monitor e Get Input Source Status CheckSum o Introduction e Set Input Source Header command DATA DATA Length CheckSum Input Source Input Source code to be set on TV Monitor Caution DVI VIDEO HDMI1 PC HDMI2 PC Get Only In the case of Magiclnfo only possible with models include Magiclnfo In the case of TV only possible with models include TV e Ack Header COM DATA Ack Nak r CMD Val mand Length Check Sum OxAA OxFF ala ox14 Input Source Input Source Same as above DATA mal EE ACRINAK Check um OxAA OxFF aaa La ERR Error code that shows what occurred error is Introduction e Screen Mode Control e Function Personal Computer changes Screen Mode of TV Monitor Cannot be controlled when Video Wall is on A Caution Only works with models include TV e Get Screen Mode Status CheckSum a e Set Picture Size Header command DATA DATA Length CheckSum OxAA 0x18 1 Screen Mode Screen Mode Screen Mode code to be set on TV Monitor Header COM DATA Ack Nak r CMD Val mand KI Check Sum OxAA OxFF oxig Sereen Mode Screen Mode Same as above com DATA ein Length Act Nak Check um ERR Error code that shows what occurred error is e Screen Size Control
49. Software Hardware Update Wizard hardware Update Wizard Fieste chorta yo poach and incl alain opines ia Pr Task the dovide dive pou want bo install le this handaan D esch iy He ber drva in these locate emi Skee tho mamulat ard madal of pour haichvats devace one ihan ckek Hasi Il you have a dak that panissa tha diss pou wasnt lo nala obok Hawa Chink Lise ha chak basa baka ka kmi ca parad the dakal seach vadh cludes kea pall ardceminnatee mecha The beth dmo bound wal be nalaled poe companba Federaal Mista W Pug ered Pay Honto 2 Dont readh yall chesse the drva bo reat Chose the option ko select the desce draa homa bet Wide does mot guarentee hat Uh dan pou hoo yell ba ha bagi makoh kor pour hare if That dira in cpt grad Cie Click the Browse button then choose A D Driver and choose your monitor model in the model list and click the Next button install From Disk Selec the device divei pou mani bo inalali for thia harders Inet the manulacturei s mstallahon dk and then 7 i ma Glam tho Aria a od rodal of paa handsain demon ara Kan dick Has IN pau make sure thal the conect drive E selected below ed have a dak that ontana the daja yau mara bo mibali chek Hawa Dok Hodi Samsung sasa Copy manufacturer s fies frome AA ee e aima vire diea prin ii moan If you can see the following message window then click the Continue Anyway button Then click OK button Hardware Installation A The software pou a
50. Sourco O50 On 2 Hot Optimum Mode 05D On 2 No Signal OSD On A MDC OSD On 1 Source OSD Sets whether the Source OSD will be displayed to indicate when the Source is changed 2 Not Optimum Mode OSD Sets whether the Optinum Mode OSD will be displayed to indicate if the current mode is not supported 3 No Signal OSD Sets whether the No Signal OSD will be displayed to indicate when there is no signal 4 MDC OSD Sets whether the MDC OSD will be displayed to indicate when the settings are changed using the MDC Soe Input Source 1 Click Input Source of the main icons and the Input Source control screen appears Selects displays you want to adjust using the Select button or checkboxes TV Mode i Multiple Display Control x File Remote Control Safety Lock Port Selection Lamp Control Options Help SAMSUNG DIGITail Select Clear z Refresh Choose Input Source Image Size ls E Componen 8 ppr O atc Lr i9 DTV Channel settings Maintenance e PC Mode BB Multiple Display Control x File Remote Control Safety Lock Port Selection Lamp Control Options Help SAMSUNG OIGITail o l bd mi All Select i Refresh Choose Input Source sm i mm 1 TT Tt Tt Be CTT Ie a ma bal Maintenance Je Info Grid shows some basic information necessary to Input Source Control 1 PC Changes the Input Source of the
51. ain the ambient temperature at 35 C or lower Note A Samsung Electronics service center can provide details 3 Floor mount guide lt Side view gt t N p ic A min 50 mm B Ambient temperature Measuring point lt 20 C e When embedding the product in the floor be sure there is a 50 mm space or more behind the product for ventilation as shown above and maintain the ambient temperature at 20 C or lower Introduction Note A Samsung Electronics service center can provide details Mechanical Layout 116 3 311 0 Installation VESA Bracket e When installing VESA make sure to comply with the international VESA standards e Purchasing VESA Bracket and Installation Information Please contact your nearest SAMSUNG Distributor to place an order After your order is placed installation profes sionals will visit you and install the bracket e Atleast 2 persons are needed in order to move the LCD Display e SAMSUNG is not responsible for any product damage or any injury caused by installation at customer s discretion Dimensions Introduction AN Notice For securing the bracket on a wall use only machine screws of 6 mm diameter and 8 to 12 mm length Accessories sold separately e Dimension with other accessories 1163 79 5 E O HO mi o Sh os ia Tan 5 BBS ZBY 3 R 5 217 0 281 5 543 Wall Bracket Installation e Contact a technician for installing th
52. ance icon in the Main Icon column to display the Maintenance screen Multiple Display Control File AddaDewce Remote Control SofetyLock PouliDewce Alert Lamp Control Help SAMSUNG DICTA Faulty Device i SelectAll Clear Al Refresh idie T 1 Video wall O CE BO jo Jofer la si Sars aaj a a US ai ai ag Ga lori a Ca aaa ae IK aa ANO HES Ss 1G a pak ei Gia ai Gamma NEA Cm hi a ira A lS Ss ng 1 Video Wall A Video Wall is a set of video screens that are connected together so that each screen shows a p whole picture or so that the same picture Is repeated on each screen 2 Video Wall Control Video Wall properties can be configured pa MOC Video Wall Close A Harizotital Vertical 1 On Off Turns on off the Video Wall function of the selected display 2 Format The format can be selected to see a divided screen e Full e Natural 3 Video Wall Screen divider The screen can be divided into You can select a number of screens with a different layout when dividing e Select a mode from Screen divider e Select a display from Display Selection e The place will be set up by pressing a number in the selected mode E ae e The maximum number of monitors that can be arranged Horizontal X Vertical 100 Up to 15 monitors can be arranged in a row The maximum value for Horizontal is 6 if Vertical while the maximum value for Vertica
53. and changes the size to Large 4 Small Turns on the PIP of the selected display and changes the size to Small 5 Double 1 Turns on the PIP of the selected display and changes the size to Double 1 6 Double 2 Turns on the PIP of the selected display and changes the size to Double 2 7 Double 3 Picture By Picture Turns on the PBP of the selected display and changes the size to Double 3 The Input source of Magici nfo works only on Magici nfo model The Input source of TV works only on TV model k PIP Size can be controlled with turning on the LCD Display power NG PIP PIP Source 1 m Click PIP of the main icons and the PIP control screen appears Multiple Display Control File Remote Control Safety Lock Fort Selection Lamp Control Options Help e o Bic BEN Select Clear Refresh EJ io ki PIP Size PIP Source PIP Source O ra Sep S ae Pree Se po i Kl iha i VOU 1 ay oe KY OO Bag ba Hai _ S Video All Inputs AV S Video Componen HOM HD ML Info Grid shows some basic information necessary to PIP Source Control PIP Source PIP Source can be controlled with turning on the LCD Display power PC Changes the source of the PIP of the selected display to PC BNC Changes the source of the PIP of the selected display to BNC DVI Changes the source of the PIP of the selected display to DVI TV Changes the source of the PIP of the selected disp
54. ay e The LCD Display s configuration at the back may vary slightly depending on the LCD Display model Connections Connecting AV Devices o0 MORON ANTIN ANTOWT SVIDEO VWDEO OUT AUDIO OUT 1 Connect an audio cable to AV COMPONENT AUDIO IN R AUDIO L on the product and the audio port on an external device such as a VCR or DVD player 2 Connect a video cable to AV IN on the product and the video output port on the external device 3 Then startthe DVD VCR or Camcorders with a DVD disc or tape inserted 4 Press SOURCE on the product or remote control and select AV Connecting to a Camcorder OUTPUT iN 1 Locate the AV output jacks on the camcorder They are usually found on the side or back of the camcorder Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the AV IN on the LCD Dis play Connections 2 Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder and the AV COMPONENT AUDIO IN R AUDIO L on the LCD Display 3 Press SOURCE on the product or remote control and select AV 4 Then start the Camcorders with a tape inserted Note The audio video cables shown here are usually included with a Camcorder If not check your local electronics store lf your camcorder is stereo you need to connect a set of two cables Connecting Using a HDMI Cable 1 Connect an HDMI cable to HDMI IN 2 MAGICINFO or H
55. b Analog connector on the video card e Connect the D sub to the 15 pin RGB COMPONENT IN port on the back of your LCD Display and the 15 pin D sub Port on the computer AGB Ji COMPONENT IH D Using the DVI Digital connector on the video card e Connect the DVI Cable to the DVI IN port on the back of your LCD Display and the DVI port on the computer DD Using the D sub Digital connector on the video card Connections e Connect the HDMI IN 1 HDMI IN 2 MAGICINFO port on the LCD Display to the HDMI port on the PC using the HDMI cable Note Select HDMI2 or HDMI as an input source when connected to the PC via an HDMI cable To obtain normal picture and audio from the PC HDMI2 or HDMI1 must be selected before PC is selected in Edit Name To enable audio when DVI Device is selected be sure to establish the connection using step Connect the Audio cable for your LCD Display to the AUDIO port on the back of the LCD Display Connect the power cord for your LCD Display to the POWER port on the back of the LCD Display Turn on the power switch Note Contact a local SAMSUNG Electronics Service Center to buy optional items Connecting to Other devices Note e AV input devices such as DVD players VCRs or camcorders as well as your computer can be connected to the LCD Display For detailed information on connecting AV input devices refer to the contents under Adjusting Your LCD Displ
56. ce directly connected to LCD Display execute Device mode Press ESC to directly go to the MagicInfo Window screen To setup Magiclnfo on a Windows screen a keyboard and mouse are required To setup Magiclnfo on a Windows screen refer to the Magiclnfo Server Help It is highly recommended not to turn off the AC power during an operation For pivoted LCD Displays ticker transparency is not supported For pivoted LCD Displays a screen resolution of up to 720 480 SD is supported for movies For drive D EWF is not applied To save Setup contents that have been changed when EWF is in the Enable state you must Commit them By selecting Disable Enable or Commit the system is restarted 1 Select Application step 1 ji Magzicinfo Setup Wizard v 1 09 Select Application step 1 Select Wo Madgiclnto Pro LAN WAN based version bung E Magiclnfo Advanced Web based version 60 day Trial Edition ab Select Later Click Mest N gt Finish Cancel You can select an Application to be executed in your computer when Windows starts 2 Select TCP IP step 2 Adjusting the LCD Display NG Mazicinfo Setup Wizard 1 1 09 WA Select TCPAP step 2 Obtain an IF address automatically M Use the following IP addres P IN put IF address Subnet mask Default gateway Preferred ONS server Alternate DNS server Click Back B Mext M gt Finish Cancel In
57. clearance of more than 4 inches 10 cm from the wall e Otherwise it may result in fire due to an increase in the internal temperature L Bend the outdoor antenna cable downwards at the location where it goes in so that rainwater does not flow in e If rainwater enters the product it may result in electric shock or fire 3 Install the antenna far away from any high voltage cables e Ifthe antenna touches or falls onto a high voltage cable it may result in electric shock or fire 3 Ensure that the packaging vinyl is kept away from children e Otherwise it may result in serious harm suffocation if children play with it L If the height of your monitor is adjustable do not place any ob ject or part of your body on the stand when lowering it e This may cause damage to the product or the person carrying it Clean Others AN Safety Instructions When cleaning the monitor case or the surface of the TFT LCD screen wipe with a slightly moistened soft cloth 3 Do not spray cleaner directly onto the surface of the product e Otherwise this may result in the discoloration and distortion of the structure and the screen surface may peel off L When cleaning the power plug pins or dusting the power outlet clean it with a dry cloth e Otherwise it may result in fire L When cleaning the product make sure to disconnect the power cord e Otherwise it may result in electric shock or fire
58. d Activate Holiday Management J Info Grid shows some basic information necessary to Time Control 1 Set clock Set the current time for the selected display PC Time To change the current time first change the PC Time 2 Timer Sets up Timerl Timer2 Timer3 and Holiday Management 3 Shows whether Timer is activated The Input source of Magic nfo works only on Magici nfo model The Input source of TV works only on TV model k Time Control is available only for the displays for which the power status is ON Time Setting up Timer and Holiday Management 1 1 Setting up Timerl Timer2 and Timer3 a Volume 3 Source O Holiday 5 a a Repeat Sun Mon Tue Wed Thu Fri Sat 1 On Time Sets the time in hours in minutes and as AM PM for turning the selected monitor on 2 Off Time Sets the time in hours in minutes and as AM PM for turning the selected monitor off 3 Volume Selects the volume when the selected monitor is turned on 4 Source Selects the external input source that will be displayed when the selected monitor is turned on 5 Holiday Applies the Holiday Management function to the Timer 6 Repeat Available selections include Once EveryDay Mon Fri Mon Sat Sat Sun and Manual e Once The Timer goes off only once e EveryDay EveryDay The Timer repeats daily e Mon Fri The Timer repeats from Monday through Friday e Mon Sat The Timer repeats from Monday th
59. e i k F i aE Volume E Source 4 j Holiday O3 Mon Tue Wed Thu Fri Sat 1 On Time Sets the time in hours in minutes and as AM PM for turning the selected monitor on 2 Off Time Sets the time in hours in minutes and as AM PM for turning the selected monitor off 3 Volume Selects the volume when the selected monitor is turned on 4 Source Selects the external input source that will be displayed when the selected monitor is turned on 5 Holiday Applies the Holiday Management function to the Timer 6 Repeat Available selections include Once EveryDay Mon Fri Mon Sat Sat Sun and Manual e Once The Timer goes off only once e EveryDay EveryDay The Timer repeats daily e Mon Fri The Timer repeats from Monday through Friday e Mon Sat The Timer repeats from Monday through Saturday e Sat Sun The Timer repeats from Saturday to Sunday e Manual Select a day of the week you want the Timer to go off 2 Setting Holiday Management The Holiday Management function specifies the dates in which the monitor will not be turned on or Timer Holiday Management A Haliday 1 Specifies the date 2 Delete All Deletes all of the holidays 3 Add Adds the specified date 4 D Deletes the schedule in the selected line The Holiday Management function can be turned on or off in the Timer setup menu The Input source of Magicl nfo works only on Magicl nfo model k The
60. e DTV in HDMI and DTV mode HDMI Black Level will be activated PIP Picturel Adjusts the PIP Screen Settings Note e Available Modes PIP On Adjusting the LCD Display 1 Contrast Adjusts the Contrast of the PIP window on the screen 2 Brightness ili Adjusts the Brightness of the PIP window on the screen 3 Sharpness a Adjusts the Sharpness of the PIP window on the screen 4 Color ie a ee T Adjusts the Color of the PIP window on the screen a Note PIP input only operates in AV HDMI or Component mode 5 Tint il Adds a natural tone to the PIP window a Note PIP input only operates in AV HDMI or Component mode Dynamic Contrast i rr rrcccv More Sigal Balance size PIP Picture Lamp Control More Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to create an optimum contrast 1 Off 2 On Adjusting the LCD Display Note This function is disabled when PIP or Energy Saving is On ot m Adjusts the inverter lamp in order to reduce energy consumption rr Note Not available when Dynamic Contrast is set to On Lamp Control Brightness Sensor LAY Brightness Sensor detects the ambient light intensity so that the picture brightness can automatically be adjusted 1 Off 2 On Picture Reset Reset Picture settings Yes Mo Reset the screen
61. e product Source List 4 1 ai DVI AM Component HOMIL DisplayPort F More Move einer Orem Use to select PC HDMI or other external input sources connected to the LCD Display Use to select the screen of your choice 1 PC 2 DVI 3 AV 4 Component 5 HDMI 6 HDMI2 7 DisplayPort 8 Magiclnfo Adjusting the LCD Display 9 TV Enabled if a TV tuner box is connected nan Note The RGB COMPONENT IN port is compatible with RGB PC and Component signals However the picture may display abnormally if the connected external input signal is different from the selected video signal PIPL ki PIP Source Note The PIP function is not available when Video Wall is On When external AV devices such as VCRs or DVDs are connected to the LCD Display PIP allows you to watch video from those devices in a small window super imposed on the PC Video signal Off On fe Note e PIP turns off when the LCD Display is switched to an external source If you select LI I Co B in Size Position and Transparency will not be activated Turns the PIP Screen Off On e Off e On OVI size Position HOMIL Transparency _HDMIZ Selects the input source for the PIP Note e PIP is disabled if the primary screen does not receive a signal Adjusting the LCD Display e A TV tuner box sold separately must be connected to use the TV US Only e PC DVI AV HDMI1 HDMI2 DisplayPor
62. e wall bracket e SAMSUNG Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the customer e This product is for installing on cement walls The product may not stay in place when installed on plaster or wood Components Only use the components and accessories shipped with the product a Tr ar age Se eye mia fa Wall Bracket 1 Hinge Left 1 Right Plastic Screw Screw Anchor 1 Hanger A 11 B 4 11 4 Introduction To mount the product on the wall bracket The shape of the product may vary depending on the model The assemblies of the plastic hanger and the screw are the same 1 Remove the 4 screws on the back of the product i Db A Notice e Mount the product on the wall bracket and make sure it is properly fixed to the left and right plastic hangers e Be careful when installing the product on the bracket as fingers can be caught in the holes e Make sure the wall bracket is securely fixed to the wall or the product may not stay in place after installation 3 Tighten the 4 screws in step 2 plastic hanger screw B to the rear holes of the product 4 Remove safety pin 3 and insert the 4 product holders into the corresponding bracket holes 1 Then place the product 2 so that it is firmly fixed to the bracket Make sure to re insert and tighten the safety pin 3 to securely hold the product to the bracket
63. e week e Holiday When choose Apply timer is not available on holiday when choose Don t apply timer is available on holiday Holiday Management e Add You can register holidays e Delete Selected Delete the selected holidays Yes NG You can delete selected holidays Note e Only enabled when registered holidays are selected e More than one holiday can be selected and deleted e Delete All Adjusting the LCD Display Delete all holidays Yes No You can delete all the registered holidays Menu Transparency k Wi Language Time Safety Lock Energy Saving Video Wall Safety Screen More Change the transparency of the background of the OSD 1 High 2 Medium 3 Low 4 Opaque Safety Lock lu Change PIN Enter PIN ES Ss Gs pee Ee The password can be changed The preset password for the LCD Display is 0000 Note If you forgot your password press the remote buttons INFO EXIT MUTE to reset the password to 0000 Adjusting the LCD Display Lock Enter PIN pass This is the function that locks the OSD in order to keep the current settings or to prevent others from adjusting the settings Energy Saving l3 5 lu C ci if Lanquage English Time Menu Transparency Medium Safety Lock Video Wall Safety Screen More This feature adjusts the power consumption of the unit in order to save energy 1 Off
64. ecting the power cord Troubleshooting e Donotuse benzene thinner or other flammable sub stances 2 Maintaining the Flat Panel Display Screen Clean with a soft cloth cotton flannel e Never use acetone benzene or thinner x They may cause flaws or deformation of the screen AR surface e The user is responsible for any damage caused by using these substances Symptoms and recommended Actions Note A LCD Display recreates visual signals received from the computer Therefore if there is a problem with the computer or the video card this can cause the LCD Display to become blank have poor Coloring become noisy etc In this case first check the source of the prob lem and then contact a Service Center or your dealer 1 Check if the power cord and the video cables are properly connected to the computer 2 Check if the computer beeps more than 3 times when booting If it does request service 3 If you installed a new video card or if you assembled the PC check if you installed the Adaptor video 4 Check if the scanning ratio of the video screen is set to between 56 Hz 85 Hz Do not exceed 60Hz when using the maximum resolution 5 If you have problems in installing the Adaptor video driver boot the computer in Safe Mode remove the Display Adaptor in the Control Panel gt System gt Device Admin istrator and then reboot the computer to reinstall the Adaptor video driver Check List Note
65. ending on the model You may not operate this function in Magicl nfo The Input source of TV works only on TV model The Maintenance Control function is available only for the displays where the power status is ON Troubleshooting 1 The display you wish to control does not appear on the System Info Grid Check the connection of RS232C Check if it is properly connected to the Com1 port Check the displays to see if any of the other displays connected have the same ID If more than one displays have the same ID those displays are not properly detected by the program due to data conflict For monitors that support a Set ID between 0 to 99 you have to set the Set ID to a value between 0 and 99 Note Check if the Set ID of the monitor is a value between 0 and 99 set the value using the Display menu 2 The display you wish to control does not appear on the other Control Info Grids Check to see if the display power is ON You can check this in System Info Grid Check if you can change the input source of the display 3 The dialogue box appears repeatedly o Check to see if the display you wish to control is selected b 4 Both On Timer and Off Timer have been set but different time is showing Apply current time to synchronize the display clocks 5 The remote may not function properly when you turn off the remote Function disconnect the RS 232C cable or exit the program in an Irregular manner Rerun the program and
66. ensure a clear image The Inter lace method is the same as that used in TVs This is a function that provides the best quality screen for the user by allowing the computer and the monitor to ex change information automatically This monitor follows the international standard VESA DDC for the Plug amp Play func tion The number of horizontal and vertical dots used to compose the screen image is called the resolution This number shows the accuracy of the display A high resolution is good for performing multiple tasks as more image information can be shown on the screen Example If the resolution is 1366 x 768 this means the screen is composed of 1366 horizontal dots horizontal res olution and 768 vertical lines vertical resolution Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This marking on the product accessories or literature indicates that the product and its electronic accessories e g charger headset USB cable should not be disposed of with other household waste at the end of their working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where
67. ety Lock Fault Device Alert Lamp Control Help SAMTANG MGIT GA os Faulty Device Select All Clear All Refresh idle Safety Screen OF n E27 C2 FI nier ETTE npa ma h a PU Apply E 1 Scroll This function is used to remove the afterimages that occur when a still screen is displayed on the sele display for a long time 2 Pixel Shift This allows the screen to be moved finely at the specified time interval 3 Safety Screen The Safety Screen function is used to prevent afterimages from occurring when a still screen is displa the monitor for a long time The Interval item is used to set the repetition cycle in hour units and the item is used to set the time when the Safety Screen function must be performed The Type item can be set to Scroll Pixel Bar Eraser All White or Pattern 4 Safety Screen2 This function is used to prevent afterimages from occurring There are five 5 types that you can sele control with this function For the Scroll type the Time item can be set to 1 2 3 4 or 5 For the Bar and Eraser types set to 10 20 30 40 or 50 For the All White and Pattern type it can be set to 1 5 10 20 o1 The Maintenance Control feature is available only for the displays whose power status is Ol 7 The Input source of Magicl nfo works only on Magici nfo model The Input source of TV works only on TV model Maintenance Video Wall 1 Click on the Mainten
68. ety Lock Port Selection Lamp Control Clear gt Idle Refresh x ng PC BNC DWI DP Contrast 100 Brightness 100 Red Green Blue Color Tana Color Temp T0000K brightness Sensor 10 Dynamic Contrast Basic information required to adjust settings is displayed Settings for the corresponding SET will be imported and displayed on the slider if a display ID is selected and the default settings will be displayed if all display IDs are selected by clicking All and Select If a value is changed in this screen the current mode will automatically switch to custom mode 1 Picture PC Available only for PC BNC DVI and DP 2 Contrast Adjusts Contrast of the selected display 3 Brightness Adjusts Brightness for the selected display 4 Red Adjusts red Color of the selected display Available only for NTSC 5 Green Adjusts green Color of the selected display Available only for NTSC 6 Blue Adjusts blue Color of the selected display Available only for NTSC 7 Color Tone Adjusts the Color Tone for the selected display 8 Color Temp Adjusts the Color Temp for the selected display 9 Brightness Sensor Adjusts the Brightness Sensor for the selected display 10 Dynamic Contrast Adjusts the Dynamic Contrast for the selected display DP may not be supported depending on the product Brightness Sensor may not be supported depending on the product The Input source of Magicl nfo w
69. f before calling for assistance Contact a Service Center for problems that you cannot solve by yourself Self Test Feature Check 1 Turn off both your computer and the LCD Display 2 Unplug the video cable from the back of the computer 3 Turn on the LCD Display The figure shown below No Signal appears on a black background when the LCD Display is working normally even though no video signal is detected While in the Self Test mode the LED power indicator remains green and the figure moves around on the screen N o Signal 4 Turn off your LCD Display and reconnect the video cable then turn on both your com puter and the LCD Display If your LCD Display screen remains blank after using the previous procedure check your video controller and computer system your LCD Display is functioning properly Warning Messages You can even view the screen at a resolution of 1920 x 1080 However you will receive the following message for a minute You can choose to change the screen resolution or stay in the current mode during that time If the resolution is more than 85Hz you will see the black screen because the LCD Display does not support over 85Hz Not Optimum Mode Recommended Mode 1366 Xx 768 60Hz Note Refer to Specifications 5 Preset Timing Modes for the resolutions or frequencies supported by the LCD Display Maintenance and Cleaning 1 Maintaining the LCD Display Case Clean with a soft cloth after disconn
70. for Screen Burn Protection Mode Period Time Adjusting the LCD Display If you start the operation to erase any residual image the operation will be performed for the set period of time and then automatically finish e Off e On Timer On Bar Period Time You can change the Safety Screen Type e Bar e Eraser e Pixel Timer Mode Time Timer Mode Period Within the set period of time specify a time for execution Adjusting the LCD Display Bar This function prevents after images on the screen by moving long black and white vertical lines Eraser This function prevents after images on the screen by moving a rectangular pattern Pixel This function prevents after images by moving many pixels on the screen Side Gray z A fa i GL reer Pixel Shitt limer Bar Eraser Pixel Move E Enter Return Select the brightness of the grey for the screen background e OFF e Light Adjusting the LCD Display e Dark Resolution Select aaa CUP ey More Power On Adjustment 1024 768 OSD Rotation 1280 X 768 Advanced Settings 1360X768 Setup Reset 1366 X 768 Reset All When the picture is not displayed properly on the screen when setting the graphics card resolution of the computer to 1024 x 768 60Hz 1280 x 768 60Hz 1360 x 768 60Hz or 1366 x 768 60Hz by using this function Resolution Select you can have the picture dis
71. hana a Fhag ard Play Mcdo m Phag and Play Monitor memo Cuivees EE MAYA Mol ache iadd masa ippo i ming Locair an 30O Paces Ii onen oefeech mate 60 Hanz mA Davide iwis Theia cess ja abung pagara IP gasa ane hasang problems wah Ika dica check Ticubleshoot bo hae Kham Araabia Feo CJ Hite neces that Ehiz MADE AAH NP Claim dha check boa alow poi lo babari diplay nerds thet thd cen Pe ga poe t conecte T This hag kad bo sn agabe pple Device umga iha iha dew anaa 5 Click Update Driver and select Install from a list or then click Next button ug and Play Monitor Proper tirs Hardware Update Wizard Denm Diwar ed hag are Fisy bicai Welcome to the Hardware Update Wizard Thin wese hipa pau instal solas bor Pig and Ply Moraine Direc Provides Hicroaolt Dies Data CAO Diyes Wasgar 1 2001 0 igtal Sigra Microsoft mdoa MP Pub shaor If pour hardeee come wih an metallsion CO or Nonny dak insert amp now To weer cite alld iha hira Noa what dio pou waned kas waned ID do CC nba Ba ltr aiarra i inital bom aba pecie beaten inod Update Chima wie Ce ee a IP ihe deseg kada aber upahan Hee dies rol Pol Baek Citra back bo the previously Initai caver eT To wereld Whe hie uliran ed LO J Cas Dik Mext lo continue i 6 Select Don t search will then click Next and then click Have disk re 9 Using the
72. he slider w o pi P ga 10 11 12 13 14 Refresh Power On Power Off Volume 10 0 si al OSD Display Source OSD Hot Optimum Mode OSD No Signal OSD MDC OSD aa 114 Q Main I cons O All E3 Remote control O Selection Buttons amp Safety Lock 10 Refresh O Port Selection D Display Selection O Lamp Control B Info Grid O Option 13 Control Tools fa Dropdown Selectors 14 OSD Display Use the main icons to switch into each screen Allows you to enable or disable the remote control signal receiving function of the display unit Set the Safety Lock function When setting the Lock function you can only operate power and lock buttons on the remote control and set The setting for the PC Serial Port can change The original value is COM1 Selects a Lamp adjustment mode Adjusts the number of LFD IDs and the frequency of search repeats Defines the range of LFD IDs to display You can select or deselect the displayed IDs using the Select or Clear button All of the monitors can be selected or deselected Selects Select or deselects Clear LFD IDs displayed by configuring 7 and 8 This searches for monitors The maximum number is indicated in the Max LFD Id field Select a display from Display Selection Use Grid to view brief information on selected display Use Control Tools to control displays Switches the OSD function On Off May not be supported depending on the product
73. ically unless the user wishes to select alternate settings Dot Acceptable TFT LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm one millionth above are used for this product But the pixels of RED GREEN BLUE and WHITE Color appear to be bright sometimes or some black pixels may be seen This is not from bad quality and you can use it without any problems For example the number of TFT LCD sub pixels contained in this product are 3 147 264 Note Design and specifications are subject to change without prior notice ff class A Information Communication equipment for industrial use Attention dealers and users This device is registered for EMC requirements for industrial use Class A and can be used in areas other than general households USA Only Dispose unwanted electronics through an approved recycler To find the nearest recycling location go to our website www sam sung com recyclingdirect or call 877 278 0799 PowerSaver This LCD Display has a built in power management system called PowerSaver This system saves energy by switching your LCD Display to low power mode when it has not been used for a certain amount of time The LCD Display automatically returns to normal operation when you press a key on the keyboard For energy conservation turn your LCD Display OFF when it is not needed or when leaving it unattended for long periods The PowerSaver system opera
74. ick Advanced Properties button 4 Choose Monitor Case1 If the Properties button is inactive it means your monitor is properly configured Please stop installation Case2 If the Properties button is active click the Properties button then follow the next steps 5 Click Driver and then click on Update Driver then click on the Next button 6 Choose Display a list of the known drivers for this device so that can choose a specific driver then click Next and then click Have disk 7 Click the Browse button then choose A D Driver 8 Click the Open button then click OK button 9 Choose your monitor model and click the Next button Then click Next button 10 Click the Finish button then the Close button Using the Software If you can see the Digital Signature Not Found window then click the Yes button Then click the Finish button and the Close button Microsoft Windows Millennium Operating System 1 2 10 11 Click Start Setting Control Panel Double click the Display icon Select the Settings tab and click Advanced Properties button Select the Monitor tab Click the Change button in the Monitor Type area Choose Specify the location of the driver Choose Display a list of all the driver in a specific location then click Next button Click the Have Disk button Specify A D driver then click OK button Se
75. icl nfo model The Input source of TV works only on TV model The I mage Size Control feature is available only for the displays whose power status is HDMI2 may not be supported depending on the product BS Time 1 Click Time of the main icons and the Time Control screen appears Multiple Display Control Ei Fle AddaDevice Remote Control SofetyLock Fault Device Alert Lomp Control Help SAMSUNG DIGITA Faulty Device 0 Select All Clear All Refresh Idle Al P adarese Time o e Clock Set 10 58 43 240 py O Activated Month Day Year mes x oe oo cc je Minute AMIPM ol z kama Ea AN Apply a I pa GG no m i ay Timer 1 Inactivated Activate EY ae Timer Inactivated Activate H as Timer 3 Inactivated Activate a ee P8 Holiday Management Je Info Grid shows some basic information necessary to Time Control 1 Clock Set Set the current time for the selected display PC Time To change the current time first change the PC Time 2 Timer Sets up Timerl1 Timer2 Timer3 and Holiday Management 3 Shows whether Timer is activated The Input source of Magicl nfo works only on Magicl nfo model The Input source of TV works only on TV model amp Time Control is available only for the displays for which the power status is ON Time Setting up Timer and Holiday Management 1 Setting up Timerl Timer2 and Timer3 Timer 1 Active Hour bali rite AM PM 2 ACIE Hour Minut
76. inside the product a network box specified by Samsung and connect the Magiclnfo output on the network box to HDMI IN 2 MAGICIN FO on the product Modes 2 is Uv Standard Custom Music Auto Volume Movie SRS TS XT Speech Speaker Select Internal Sound Reset Adjusting the LCD Display The LCD Display has a built in high fidelity stereo amplifier 1 Standard Selects Standard for the standard factory settings 2 Music Selects Music when watching music videos or concerts 3 Movie Selects Movie when viewing movies 4 Speech Selects Speech when watching a show that is mostly dialog i e news 5 Custom Selects Custom if you want to adjust the settings according to your personal preferen ces Custom L X8 ui The sound settings can be adjusted to suit your personal preferences ar Note e You can hear the sound even when sound value is set to 0 e If you adjust sound using Custom function Mode will turn to Custom mode Bass ss Emphasizes low frequency audio Treble ss Emphasizes high frequency audio Balance es Allows you to Adjusts the sound balance between the left and right speakers Auto Volume 15 ii Mode Custom Custom SRS TS AT 3n Speaker Select Internal Sound Reset Adjusting the LCD Display Reduces the difference in volume control between broadcasters 1 Off 2 On SRS TS XTLZS TH Mode Custom Auto Volume Speaker Select Sound Reset pa
77. is subject to change without notice 2010 Samsung Electronics Co Ltd All rights reserved Reproduction in any manner whatsoever without the written permission of Samsung Elec tronics Co Ltd is strictly forbidden Samsung Electronics Co Ltd shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing performance or use of this ma terial Samsung is the registered trademark of Samsung Electronics Co Ltd Microsoft Windows and Windows NT are registered trademarks of Microsoft Corporation VESA DPM and DDC are registered trademarks of Video Electronics Standard Association All other product names mentioned herein may be the trademarks or registered trademarks of their respective owners SfS TruSurround XT SRS and the symbol are trademarks of SRS Labs Inc TruSurround XT technology is incorporated Trusurround XT z under licese form SRS Labs Inc
78. isplay will search all the video source inputs twice in sequence looking for an active video source returning back to the first video source in the sequence if no video is found 1 Off 2 On Primary Source Recovery Source AutoSwitch Primary Source Secondary Source Move Enter O Return When Primary Source Recovery is On only the Primary Source and Secondary Source video source selection will be searched for active video The Primary Source will be selected if active video is found if no video is found the Sec ondary Source will be selected if no video is found in Secondary Source again the no input signal is displayed 1 Off 2 On Primary Source Source AutoSwitch Primary Source Recovery Secondary Source Move Enter Return Adjusting the LCD Display Specify Primary Source for the automatic input source Secondary Source Source AutoSwitch Primary Source Recovery Primary Source Move Enter O Return Specify Secondary Source for the automatic input source Picture PC DVI DisplayPort Magiclnfo Mode e If connected to a PC set Edit Name to DVI PC and enjoy video or audio content saved on the PC e f connected to an AV device set Edit Name to DVI Device and enjoy video or audio content saved on the AV device Available Modes e J PC DVI DisplayPort e Eav 6 Component C HDMI M Magicinfo rv E Note A TV tuner box sold separate
79. l install inside the product a network box specified by Samsung and connect the Magicilnfo output on the network box to HDMI IN 2 MAGICINFO on the product Introduction User Installation Guide note e Be sure to call an installation expert of Samsung Electronics to install the product e The warranty becomes invalid if the product is installed by someone other than a profes sional authorized by Samsung Electronics e A Samsung Electronics service center can provide details Tilt Angle and Rotation 1 The product can be tilted up to 15 degrees from a vertical wall 2 Touse the product in portrait mode rotate it clockwise so that the LED indicator is at the bottom Ventilation requirement 1 Vertical wall mount condition lt Side views gt t A min 40 mm Introduction B Ambient temperature Measuring point lt 35 C e When installing the product onto a vertical wall be sure there is a 40 mm space or more behind the product for ventilation as shown above and maintain the ambient temperature at 35 C or lower Note A Samsung Electronics service center can provide details 2 Embedded Mount guide lt Side view gt lt Top views X min 40 mm min 70 mm min 50 mm min 50 mm Ambient temperature Measuring point lt 35 C a m O O WD gt e When embedding the product in a wall be sure there is some space behind the product for ventilation as shown above and maint
80. l in the model list then click the OK button a SAMSUNG monitor installer Saal the moadorahich you wari bo nabali 4 Ifyou can see following message window then click the Continue Anyway button Then click OK button Microsoft Windows XP 2000 Operating System Hardware Installation The software pou ane installing for this handerare Samsung sasa has no passed Windows Logo besing bo ani its compatibel with Windows XP Tell mg why the besting ts important Continuing your installation of this software may impair or destabilize the comect operation of your system either immediately of in the future Microzoll strongly recommends thal pou stop this installation now and contact the hardware vendor for software that has passed Window Logo beating Continue Aray STOP Installation Using the Software Note This monitor driver is certified by Microsoft and installing it will not damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung com Installing the Monitor Driver Manual Microsoft Windows Vista Operating System 1 Insert your Manual CD into your CD ROM drive 2 Click 7 Start and Control Panel Then double click on Appearance and Personal ization 3 Click Personalization and then Display Settings Coe et ee bees ee ee ee eee ee i ee eee ee km er rere a Bai a ee el ee ee er cee a F iea TEDS mwa kal ee ee biyi Na
81. l is 6 if Horizontal is set to 15 4 Viewing Screen Splits You can view and change the layout of screens using the Screen Divider settings The range of the Screen Divider setting may differ depending on the model You may not operate this function in Magic nfo The Input source of TV works only on TV model The Maintenance Control function is available only for the displays where the power sta Troubleshooting 1 The display you wish to control does not appear on the System Info Grid Check if the entered IP address is correct and check the connection status of the Ethernet cable Check the displays to see if any of the other displays connected have the same ID If more than c have the same ID those displays are not properly detected by the program due to data conflict For monitors that support a Set ID between 0 to 99 you have to set the Set ID to a value betwee Note Check if the Set ID of the monitor is a value between 0 and 99 set the value using the Di menu 2 The display you wish to control does not appear on the other Control Info Grids Check to see if the display power is ON You can check this in System Info Grid Check if you can change the input source of the display 3 The dialogue box appears repeatedly Check to see if the display you wish to control is selected 4 Both On Timer and Off Timer have been set but different time is showing Apply current time to synchronize the display c
82. lay to TV DTV Changes the source of the PIP of the selected display to DTV AV Changes the source of the PIP of the selected display to AV S Video Changes the source of the PIP of the selected display to S Video Component Changes the source of the PIP of the selected display to Component HDMI1 HDMI2 Changes the source of the PIP of the selected display to HDMI DP Switches the PIP Source of the selected Display to DP HDMI 2 may not be supported depending on the product DP may not be supported depending on the product Some of the PI P Sources may not be available for selection depending on the input source type of the Main Screen The Input source of Magicl nfo works only on Magicl nfo model The PIP Control feature is available only for the displays whose power status is ON and the PI P function is set to ON il Setti ngs SA Picture 1 Click Settings of the main icons and the Settings Control screen appears Multiple Display Control File Remote Control SafetyLock Port Selection Lamp Control Options Help Select Clear Picture TV AV S Video Component HOMN HOMIZ DTY 2 Lontrasi 100 Brightness Sharpness Color imi Color Tome Color Temp 10000K Brightness Sensor 10 Dynamic Contrast Je Basic information required to adjust the Picture is displayed in the main menu Settings for the selected monitor will be displayed if one of the connected monitors is selected
83. lect Show all devices and choose the monitor that corresponds to the one you con nected to your computer and click OK Continue choosing Close button and OK button until you close the Display Properties dialogue box Microsoft Windows NT Operating System 1 2 Click Start Settings Control Panel and then double click Display icon In Display Registration Information window click Settings Tab and then click All Display Modes Select a mode that you wish to use Resolution Number of Colors and Vertical frequen cy and then click OK Click Apply button if you see the screen working normally after clicking Test If the screen is not normal change to a different mode lower mode of resolution Colors or frequency Note If there is no Mode at All Display Modes select the level of resolution and vertical frequency by referring to the Preset Timing Modes in the user guide Linux Operating System To execute X Window you need to make the X86Config file which is a type of system setting file 1 2 Press Enter at the first and the second screen after executing the X86Config file The third screen is for setting your mouse Set a mouse for your computer The next screen is for selecting a keyboard 8 9 10 Using the Software Set a Keyboard for your computer The next screen is for setting your monitor First of all set a horizontal frequency for your monitor You ca
84. lect a set to see the volume of the selected set within the slider w Multiple Dr Ox py i 3 a O EZ Sa Fault Device Aler Lamp Control SAMSUNG DONA Faulty Device i Select All Clear All Refresh Idle Power Un Power Uff Volume 1 fa 8 OSD Display Source OSD On Not Optimum Mode OSD On No Signal OSD 10 Q Main I cons O Lamp Control Add a Device Z Display Selection Remote Control O Info Grid Safety Lock Control Tools O Fault Device Alert 10 OSD Display Use the main icons to switch into each screen You can add a device by entering the IP address configured on the monitor Allows you to enable or disable the remote control signal receiving function of the display unit Set the Safety Lock function When setting the Lock function you can only operate power and lock buttons on the remote contrc When connecting to the monitor fails it turns the function that transfers the result through an ema Selects a Lamp adjustment mode Select a display from Display Selection All of the monitors can be selected or deselected 9 Use Control Tools to control displays 10 Switches the OSD function On Off May not be supported depending on the product lt Note gt The remote control Enable Disable function operates whether or not the power is On Of applies to all displays connected to the MDC However regardless of the status at the tir MDC is shut down the remote control signal receiving
85. locks 5 The remote may not function properly when you turn off the remote Function disconnect the Ether exit the program in an Irregular manner Rerun the program and turn the remote function again to functions lt Note gt This program may malfunction due to problems in communication circuits or interference 1 appliances nearby Please make selection in the information grid before controlling Settings Value Display In Multiple Display Mode 3 When there are more than one displays connected the settings values are displayed as follows 1 No selection Displays the Factory Default Value 2 Selected one display Fetches and displays the settings value for the selected display 3 Selected one display ID1 and add another display 1D3 The program which was displaying the s value of ID 1 fetches and displays the value of D3 4 If all sets are selected at the same time by clicking All and Select the default value will be restored Copyright 2003 2010 Samsung Electronics Co Ltd All rights reserved Adjusting the LCD Display Input Available Modes DJPC DVI DisplayPort gt Eav H Component CJHDMI M Magicinfo Tv E Note A TV tuner box sold separately must be connected to use the TV US Only using Magiclnfo To use Magiclnfo with an TSn 3 model install inside the product a network box specified by Samsung and connect the Magiclnfo output on the network box to HDMI IN 2 MAGICIN FO on th
86. lt Note gt The remote control Enable Disable function operates whether or not the power is On Off and this applies to all displays connected to the MDC However regardless of the status at the time the MDC is shut down the remote control signal receiving function of all displays is initialized to Enable when the MDC is closed Port Selection i Multiple Display Control Lamp Control Options Refresh Power Un Power Of Volume 10 OSD Display Source OSD Hot Optimum Mode OSD Ho Signal OSD MDC OSD 1 The Multiple Display Control is originally set to COM1 2 If any port other than COM1 is used COM1 through COM4 can be selected in the Port Selection Menu 3 If the exact port name that is connected to the LCD Display using a serial cable is not selected communication will be unavailable 4 The selected port is stored in the program and used for the next program as well System 1 Click System in the main menu to open the system adjustment screen a i Multiple Display Control File Remote Control Safety Lock Port Selection Lamp Control Options Help a H mM L Power On Power Off Input Source 4 m A FO O 2 O a O PP Image Size OSD Display Source OSD Hot Optimum Mode OSD MULE No Signal OSD Settings Halik MDC OSD lt 2 i Maintenance Ye Info Grid shows some basic information necessary to System 1 E Power Status 2 Input 3 Image Size 4 On Timer 5 Off Ti
87. ly must be connected to use the TV US Only using Magiclinfo To use Magjiclnfo with an TSn 3 model install inside the product a network box specified by Samsung and connect the Magiclnfo output on the network box to HDMI IN 2 MAGICIN More FO on the product Mode EIT m Custom Advertisement 2 Color Tone 7 0 Color Temp Image Lock Auto Adjustment lx Adjusting the LCD Display Note Not available when Dynamic Contrast is set to On 1 3 Information Recommended for communicating exact information e g public information Advertisement Recommended for displaying advertisements e g videos or indoor or outdoor ads Custom Custom Lid By using the on screen menus the contrast and brightness can be changed to your personal preference Note maa By adjusting the picture using the Custom function Mode will change to Custom mode Not available when Dynamic Contrast is set to On Contrast Adjusts the Contrast Brightness Adjusts the Brightness Sharpness Adjusts the Sharpness Gamma Contrast Brightness Sharpness Adjust the mid range brightness Gamma for the picture e Natural Adjusting the LCD Display e Mode 1 Sets the picture brighter than Natural e Mode 2 Sets the picture darker than Mode 1 e Mode 3 Increases the contrast between dark and bright colors Color Toned ss 3 Mode Custom Custom of Cool Color Temp I
88. m Display Area 697 68 mm H x 392 25 mm V Synchronization Horizontal 30 81 kHz Vertical 56 85 Hz Display Color 16 7M true Resolution 1366 x 768 60Hz 1920 x 1080 60Hz Optimum resolution Maximum resolution Maximum Pixel Clock 148 5MHz Analog Digital Power Supply This product supports 100 240 V Since the standard voltage may differ from country to country please check the label on the back of the product Signal connectors D sub Component DVI D In VCR HDMI 1 2 RS232C In Out DP DC Out Ster eo Audio In Out Audio In L R RJ45 USBx3 LAN D sub out HDMI out Dimensions W x H x D With Stand 787 4 mm x 553 1 mm x 311 0 mm 31 0 x 21 8 x 12 2 inches With Stand Without Stand 787 4 mm x 482 2 mm x 116 3 mm 31 0 x 19 0 x 4 6 inches Without Stand Weight 20 8 Kg 45 9Ibs VESA Mounting Interface 200 0 mm X 200 0 mm Environmental considerations Operating Operating Temperature 50 F 104 F 10 C 40 C Specifications Environmental considerations Humidity 10 80 non condensing Storage Operating Temperature 4 F 113 F 20 C 45 C Humidity 5 95 non condensing Plug and Play Capability This LCD Display can be installed on any Plug amp Play compatible system The interaction of the LCD Display and the computer systems will provide the best op erating conditions and LCD Display settings In most cases the LCD Display installation will proceed automat
89. mage Lock Aute Adjustment T More E 2 Note Not available when Dynamic Contrast is set to On The Color tones can be changed l 2 3 4 5 Off Cool Normal Warm Custom Note If you set the Color Tone to Cool Normal Warm or Custom the Color Temp function is disabled If you set the Color Tone to Off the Color Control function is disabled Color Control Adjusts individual Red Green Blue Color balance Note Not available when Dynamic Contrast is set to On 1 2 Red Green Adjusting the LCD Display 3 Blue Color Temp LIT Color Temp is a measure of the warmth of the image Colors Pari Note This function is enabled when Mode is set to Custom and Dynamic Contrast and Color Tone are Off Image Lock il Image Lock is used to fine tune and get the best image by removing noise that creates unstable images with jitters and shakiness If satisfactory results are not obtained using the Fine adjustment use the Coarse adjustment and then use Fine again para Note Available in PC mode only Coarse ee Removes noise such as vertical stripes Coarse adjustment may move the screen image area You may relocate it to the Center using the horizontal control menu Fine p Removes noise such as horizontal stripes If the noise persists even after Fine tuning repeat it after adjusting the frequency clock speed Position Adjusts the screen location h
90. mer 2 Selects displays you want to adjust using the Select button or checkboxes Multiple Display Control File Remote Control Safety Lock Port Selection Lamp Control Options Help SAMSUNG m Refresh Input Source Go Image Size OSO Display Source OSD Hot Optimum Mode OSD No Signal OSD MDC OSD P Maintenance Je W System allows controlling some of the functions of the selected display 1 Power On Off Turns the power of the selected display On Off 2 Volume Controls the volume level of the selected display It receives the volume value of the selected display from the sets and displays it in the slider If you deselect a single display or all displays the default value 10 will be restored 3 Mute On Off Turns on off the Mute function of the selected display When selecting one set at a time turn on the Mute function for the selected set The Mute function is disabled automatically when you adjust the volume level The values return to the default settings when you undo the selections or choose Select All The Volume Control and Mute features are available only for the displays whose power status is ON 3 Selects whether to display the menu screen using the OSD Display menu Multiple Display Control File Remote Control Salay Lock Port Selection Lamp Conirol Options Help o gt fo All Select Clear 3 a Refresh oop Volume 10 ud O5D Display 1
91. mode TV channels provide written information services via tele text Teletext Buttons GOEL OED OG PICO OE3 DEI DENG Note This function does not work for this LCD Display MTS You can select MTS Multichannel Television Stereo mode Audio Type MTS S Mode Default FM Stereo Mono Mono Manual Stereo Mono Stereo Change D E9 ENTER PRE CH EK mute Ov CH P A Div 18 MENU RETURN O ff exit 21 Magiclnfo Introduction SAP Mono SAP Mono DUAL STEREO MONO DUAL DUAL Il and MONO NICAM MONO NICAM STEREO can be operated depending on the broadcasting type by using the DUAL button on the remote control while watching TV note Enabled when a TV tuner box is connected This button is used to return to the immediately previous channel Note Enabled when a TV tuner box is connected Pauses mutes the audio output temporarily This is dis played on the lower left corner of the screen The audio comes back on if MUTE or VOL is pressed in the Mute mode In TV mode selects TV channels Note Enabled when a TV tuner box is connected Allows you to watch an analogue or digital TV note Enabled when a TV tuner box is connected Opens the on screen menu and exits from the menu or closes the adjustment menu Returns to the previous menu Exits from the menu screen Magiclnfo Quick Launch Button Musing Magiclnfo To use Magiclnfo with an TSn 3 mode
92. n enter the frequency directly Set a vertical frequency for your monitor You can enter the frequency directly Enter the model name of your monitor This information will not affect the actual execution of X Window You have finished setting up your monitor Execute X Window after setting other re quested hardware MDC Multi Display Control Installation 1 2 4 5 6 f 8 LA MDC LS Insert the installation CD into the CD ROM drive Click the MDC System installation Program Note If the screen for installing the software does not appear install it using the MDC System execution file in the MDC folder of the CD ROM If the installation wizard screen does appear click Next The License Agreement screen will appear Click Yes The Customer Information window will appear Register the user information and click Yes The Choose Destination Location window will appear Specify the file location to install to and click Next Note If the file location is not specified the Program will be installed in the default file location The Start Copying Files window will appear Confirm the file location and click Next The installation progress screen will appear The InstallShield Wizard Complete screen will appear Click Finish Note Select Launch MDC System and click Finish The MDC Program will immediately be run Using the Software Multiple Display Control
93. nd Color with large dif ference in luminance Avoid using Grey Colors which can cause Image retention easily Avoid Colors with big difference in luminance Black 4 White Grey Information pasas oa rg Change the characters Color periodically e Use Bright Colors with little difference in luminance Cycle Change the characters Color and background Color every 30 minutes FLIGHT TIME FLIGHT TIME FLIGHT TIME OZ348 20 30 e Every 30 minutes change the characters with movement m FLIGHT TIME FLIGHT TIME 0348 20 30 02348 20 30 Step1 Step3 e Have the images and logo cycle periodically Cycle Display moving image together with Logo for 60 seconds after 4 hours in use e The best way to protect your monitor from Image retention is to turn the Power off or set your PC or System to operate a Screen Saver Program when you are not using it If these guidelines are not followed it may affect your warranty Apply the Screen Pixel function on Product e Apply the Screen Pixel function Symptom Dot with Black Color move up and down FLIGHT TIME H OZ348 20 30 UA102 21 10 e Apply the Screen Bar function Symptom Horizontal Vertical Bar with Black Color move up and down FLIGHT TIME Horizontal Bar OZ5 20 3U UA102 21 10 E3 Apply the Screen Erasing function on Product Information e Apply the Screen Erasing function Sympt
94. ne installing Ice this hencevere Samsung sawa has ret passed Windows Logo beeing to wendy ws ompake writ einh KP The ma vaky the belir is iita Contivuing yow installation of this software may impair mhon o destabilize the comect contact th hardware vendo for aofheware that has passed Windows Logo testing Tanen Pma Note This monitor driver is certified by Microsoft and this installation will not damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung com Click the Close button then click the OK button continually Using the Software Completing the Hardware Update Wirand The vazad kart irha mabaling the sofiera bat Samsung kaa To iiaia thee chee fo isa cee a Elmar PT if the dosa kada ator upang tho dies roll di ik ni Bol Back Diver back bo h paari inibalsd diwa Lert akal To urns all ihs drem Lice ace Chie 10 Monitor driver installation is completed Microsoft Windows 2000 Operating System When you can see Digital Signature Not Found on your monitor follow these steps 1 Choose OK button on the Insert disk window 2 Click the Browse button on the File Needed window 3 Choose A D Driver then click the Open button and then click OK button How to install maa Click Start Setting Control Panel 2 Double click the Display icon 3 Select the Settings tab and cl
95. ng functions For energy conservation turn your LCD Display OFF when it is not needed or when leaving it unattended for long periods 10 Remote Control Sensor Aim the remote control towards this spot on the LCD Display Rear Note See the Connections section for details about cable connections The LCD Display s con figuration at the back may vary slightly depending on the model Introduction POWER s w oN OFF Switches the LCD Display On Off g POWER The power cord plugs into the LCD Display and the wall outlet RGB COMPONENT IN PC COMPO NENT Connection Terminal Input e Connect the RGB COMPONENT IN port on the monitor to the RGB port on the PC using the D SUB cable e Connect the RGB COMPONENT IN port on the monitor to the COMPONENT port on the external device using the RGB to COMPONENT cable e Connect the RGB COMPONENT IN port on the monitor to the BNC port on the PC using the RGB to BNC cable DVI IN PC Video Connection Terminal Connect the DVI IN port on the monitor to the DVI port on the PC using the DVI cable 5 RGB DVI DP HDMI AUDIO IN PC DVI DP HDMI Audio Connection Terminal In put Connect the RGB DVI DP HDMI AUDIO IN terminal of the monitor and the speaker output terminal of your computer s sound card using a stereo cable sold separately DPIN Receives a signal from the Displayport Connect a DP cable to DP IN on the product and DP IN
96. nitor for an extended period of time PRODUCT INFORMATION Image Retention Free What is Image Retention Image retention may not occur when a LCD panel is operated under normal con ditions Normal conditions are defined as continuously changing video patterns When the LCD panel is operated for a long time with a fixed pattern over 12 hours there may be slight difference in voltage between electrodes that work the liquid crystal LC in a pixel The voltage difference between electrodes increases with time forcing the liquid crystal to lean When this occurs the previous image may be seen when the pattern is changed To prevent this the accumulated voltage difference must be decreased Information Common Electrode ITO F Color Filter Black Matrix i TFT Pixel Electrode Storage Capacitor Bus Line ITO Cs Power Off Screen Saver or Power Save Mode e Turn the power off for 2 hours after 12 hours in use e Set the Monitor to power off with the PC Display Properties Power Scheme e Use a Screen saver if possible Screen saver in one Color or a moving image is recommended e The Image Retention Free function applied to the product is recommended Change the Color Information periodically Type 1 FLIGHT FLIGHT O2348 OZ2348 UA102 UA102 Note Use Two different Colors Rotate the Color Information with 2 different Colors every 30 minutes e Avoid using a combination of characters and backgrou
97. no selecti made the factory default is displayed DP may not be supported depending on the product Audio 1 Click Settings of the main icons and the Settings Control screen appears E Multiple Display Control Fle AddaDewce Remote Control SefetyLock Fault Device Alert Lamp Control SAMSUNG DIGITAL Faulty Device U Select Refresh tilts 1 Audio All Input Bass 0 Cc AI asBs 9 Treble kA n Baa 4 j Balance rl O R5 SRS TS XT ON 4 Sound Select Main Q Basic information required to adjust Audio is displayed in the display window Settings for the corres SET will be imported and displayed on the slider if a display ID is selected and the default settings displayed if all display IDs are selected by clicking All and Select If a value is changed in this screen current mode will automatically switch to custom mode 1 Audio Controls audio settings for all input sources 2 Bass Adjusts Bass of the selected display 3 Treble Adjusts Treble of the selected display 4 Balance Adjusts Balance of the selected display 5 SRS TS XT SRS TS XT Sound ON OFF of the selected display 6 Sound Select Select either Main or Sub when PIP is On This feature is available only for the displays whose power status is ON and if no selecti made the factory default is displayed The Input source of Magicl nfo works only on Magicl nfo model The Input source of TV works only on TV model
98. nter the Subnet Mask if IP Setting is set to Manual e Gateway Manually enter the Gateway if IP Setting is set to Manual Available Modes PC DVI DisplayPort FJ Av 4 Component HDMI Magiclnfo hi TV Note A TV tuner box sold separately must be connected to use the TV US Only m Musing Magiclnfo To use Magiclnfo with an TSn 3 model install inside the product a network box specified by Samsung and connect the Magiclnfo output on the network box to HDMI IN 2 MAGICIN FO on the product Note For Magiclnfo in Device mode moving external devices while booting may cause errors Set up external devices only if the LCD Display turns on Do not unplug the LAN cable used for the network ex video display Otherwise the Program Magiclnfo may stop If you do unplug the cable restart the system Do not unplug the LAN cable used by an USB device ex video display Otherwise the Program Magiclnfo may stop To access other sources press the SOURCE button in Magicinfo MagiclInfo The preset password for the LCD Display is 000000 The server Program s Power On option works only if the LCD Display s power is com pletely shut off Please make sure not to use the Power On option when the LCD Display is in the process of shutting down since this may cause system errors on the LCD Display When using Magiclnfo with the Magiclnfo Server Program perform Network mode When using MagiclInfo with the devi
99. nterlaced scan it is not available in progressive scan 1 Off 2 On Adjusting the LCD Display PIP Picture fu Adjusts the PIP Screen Settings pin E Note Available Modes PIP On 1 Contrast rr a Adjusts the Contrast of the PIP window on the screen 2 Brightness en Adjusts the Brightness of the PIP window on the screen 3 Sharpness aan Adjusts the Sharpness of the PIP window on the screen Dynamic Contrast el F More Film Mode Lamp Control Brightness Sensor Picture Reset Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to create an optimum contrast 1 Off 2 On Note This function is disabled when PIP or Energy Saving is On Lamp Control au a Adjusts the inverter lamp in order to reduce energy consumption l NG Note Not available when Dynamic Contrast is set to On Adjusting the LCD Display Brightness Sensor LAI Brightness Sensor detects the ambient light intensity so that the picture brightness can automatically be adjusted 1 Off 2 On Picture Reset L i Reset picture settings Reset the screen settings Sound Available Modes JPC DVI DisplayPort Dav 6 Component gt HDMI M Magicinfo liv Note A TV tuner box sold separately must be connected to use the TV US Only EF using Magiclnfo To use Magiclnfo with an TSn 3 model install
100. o e TV Note A TV tuner box sold separately must be connected to use the TV US Only Using MagicInfo To use Magiclnfo with an TSn 3 model install inside the product a network box specified by Samsung and connect the Magiclnfo output on the network box to HDMI IN 2 MAGICIN FO on the product Language J 4 Mu A Time Deutsch Menu Transparency _ ESBan Safety Lock Francais Energy Saving ie Svenska Pycckwit Portugues F Video Wall Safety Screen More You can choose one of 13 languages Adjusting the LCD Display English Deutsch Espa ol Frangais Italiano Svenska PYCCKHH Portugu s T rk e MRK Siep AAG 820 Note The language chosen affects only the language of the OSD It has no effect on any software running on the computer Timell tS Lia Selects from one of 4 time settings Clock Set Sleep Timer Timer and Holiday Manage ment Clock Set Month Day Year A our Minute am pm Current Time Setting Sleep Timer Tire s Clock Set Turns the LCD Display off automatically at certain times 1 Off 2 30 3 60 4 90 5 120 6 150 7 180 Adjusting the LCD Display Timer1 Timer2 Timer3 of Time 17 JC Volume Source You can set the LCD display to automatically turn on or off at a specified time Note e Only enabled when the clock is set using the Clock Set menu e The Manual option allows you to select a day of th
101. om 2 Vertical blocks move while erasing the display HT TIME OZ348 20 30 UA102 21 10 Appendix Contact SAMSUNG WORLDWIDE Note If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care Center U S A CANADA MEXICO ARGENTINA BRAZIL BOLIVIA CHILE COLOMBIA COSTA RICA DOMINICA ECUADOR EL SALVADOR GUATEMALA HONDURAS JAMAICA NICARAGUA PANAMA PERU PUERTO RICO TRINIDAD amp TO BAGO VENEZUELA ALBANIA AUSTRIA BELGIUM North America 1 800 SAMSUNG 726 7864 http www samsung com 1 800 SAMSUNG 726 7864 http www samsung com ca 01 800 SAMSUNG 726 7864 Latin America 0800 333 3733 0800 124 421 4004 0000 800 10 7260 800 SAMSUNG 726 7864 From mobile 02 482 82 00 01 8000112112 0 800 507 7267 1 800 751 2676 1 800 10 7267 800 6225 1 800 299 0013 800 27919267 1 800 234 7267 00 1800 5077267 800 7267 0 800 777 08 1 800 682 3180 1 800 SAMSUNG 726 7864 0 800 100 5303 Europe 42 27 5755 0810 SAMSUNG 7267864 E 0 07 min 02 201 24 18 http www samsung com ca_fr French http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com h
102. on another display Introduction AV COMPONENT AUDIO IN R AUDIO L Connect the AV COMPONENT AUDIO IN R AUDIO L port on the monitor to the audio output port on the PC or on the external de vice using an audio cable O Avin Connect the AV IN terminal of your monitor to the video output terminal of the external device using a VIDEO cable AUDIO OUT Connect a headphone or an External speak er T pc ouT Make sure to use connecting DC OUT ter minal to the authorized TV Tuner Box US Only Otherwise this may result in damage to the product HDMLUIN 1 e Connect the HDMI IN 1 terminal at the back of your LCD Display to the HDMI terminal of your digital output device us ing a HDMI cable e Up to HDMI 1 3 can be supported Note e A normal external device DVD player or camcorder etc or a TV tuner box can be connected to the HDMI IN 1 terminal e To use a TV tuner box US Only make sure to connect it to the HDMI IN 1 ter minal 12 HDMI IN 2 MAGICINFO e Connect the HDMI IN 2 MAGICINFO terminal at the back of your LCD Display to the HDMI terminal of your digital output device using a HDMI cable e Upto HDMI 1 3 can be supported Introduction Musing Magiclnfo To use Magiclnfo with an TSn 3 model in Stall inside the product a network box speci fied by Samsung and connect the Magicin fo output on the network box to HDMI IN 2 MAGICINFO on the product
103. ong period of time disconnect the power cord from the power outlet e Otherwise this may result in overheating or fire due to dust and may result in fire due to electric shock or leakage E Do not place any heavy items or toys or confectionery such as cookies etc that may attract the attention of children and to the product e Your children may hang onto the product causing it to fall and this may result in personal injury or death L Be careful that children do not place the battery in their mouths when removed from the remote control Place the battery in a lo cation that children or infants cannot reach e If children have had the battery in their mouths consult your doctor immediately Safety Instructions J When replacing the battery insert it with the right polarity e Otherwise the battery may become damaged or it may cause fire personal injury or damage due to leakage of the internal liquid Use only the specified standardized batteries and do not use a new battery and a used battery at the same time e Otherwise the batteries may be damaged or cause fire per sonal injury or damage due to a leakage of the internal liquid L The batteries and rechargeable batteries are not ordinary re fuse and must be returned for recycling purposes The customer is responsible for returning the used or rechargeable batteries for recycling e The customer can return used or rechargeable batteries to a nearb
104. or lightning is occurring do not touch the power cord a gt or antenna cable e Otherwise this may result in electric shock or fire IL Do not try to move the monitor by pulling only the wire or the signal cable e Otherwise it may fall and result in electric shock damage to the product or fire due to damage to the cable L Do not lift or move the product back and forwards or right and left while only holding the power cord or signal cables e Otherwise it may fall and result in electric shock damage to the product or fire due to damage to the cable 3 Make sure that the ventilating opening is not blocked by a table or curtain e Otherwise it may result in fire due to an increase in the internal temperature Do not place any containers containing water vases flower pots medicines as well as any metal on the product If water or a foreign material enters the product disconnect the power cord and contact a Service Center e This may result in a product malfunction electric shock or fire L Do not use or keep combustible spray or flammable material near the product e Otherwise this may result in an explosion or fire 3 Do not insert any metal such as chopsticks coins pins and steel or flammable objects such as matches or paper inside the J product through the ventilating openings input and output termi CJ nals etc e If water or foreign material enters
105. orizontally and vertically Adjusting the LCD Display Auto AdjustmentL Auto Adjustment Please Wait The values of Fine Coarse Position are adjusted automatically By changing the resolution in the control panel the auto function is performed Note Available in PC mode only Signal Balancelil This is used to make up for the weak RGB signal transmitted by a long signal cable Note e Not available when Dynamic Contrast is set to On e Available in PC mode only Signal Balance tm G paaa a Move ED BA GO NAA Selects either On or Off with the signal balance Signal Control Note Available when Signal Balance is set to On 1 R Gain a gg 2 G Gain a ag 3 B Gain 4 R Offset Adjusting the LCD Display 5 G Offset 6 B Offset Sizel lore Signal Balance Dynamic Contrast Lamp Control More The Size can be switched 1 16 9 2 4 3 HDMI Black Levelli a More Signal Balance Size Dynamic Contrast Lamp Control F hl Ore When a DVD or set top box is connected to your product via HDMI or DVI port it may cause a degradation in the screen quality such as an increase in the black level a low contrast or discoloration etc depending on the external device connected In this case adjust the screen quality of your product by configuring the HDMI Black Level 1 Normal 2 Low Note For Timing which can be used for both the PC and th
106. orks only on Magicl nfo model The Input source of TV works only on TV model Color Temp is only enabled if the Color Tone is set to Off k This feature is available only for the displays whose power status is ON and if no selection is made the factory default is displayed Audio 1 Click Settings of the main icons and the Settings Control screen appears m Multiple Display Control File Remote Control Safety Lock PortSelection Lamp Control Options Help Or All Inputs Treble ni i Aaan Balance Lido RO SRS TS XT OM Sound Select Main Basic information required to adjust Audio is displayed in the display window Settings for the corresponding SET will be imported and displayed on the slider if a display ID is selected and the default settings will be displayed if all display IDs are selected by clicking All and Select If a value is changed in this screen the current mode will automatically switch to custom mode 1 Audio Controls audio settings for all input sources 2 Bass Adjusts Bass of the selected display 3 Treble Adjusts Treble of the selected display 4 Balance Adjusts Balance of the selected display 5 SRS TS XT SRS TS XT Sound ON OFF of the selected display 6 Sound Select Select either Main or Sub when PIP is On 3k The Input source of Magicl nfo works only on Magici nfo model The Input source of TV works only on TV model This feature is available only for
107. played on the screen in the specified resolution Note Available in PC mode only 1 Off 2 1024 X 768 3 1280 X 768 4 1360 x 768 5 1366 X 768 Note Selecting the menu is only allowed when the graphics resolution is set to 1024 x 768 60Hz 1280 x 768 60Hz 1360 x 768 60Hz or 1366 x 768 60Hz Power On Adjustment LAX Mu Adjusts the Power On time for the screen Caution Set the Power On time to be longer to avoid overvoltage Adjusting the LCD Display OSD Rotation LAA Mu More Power On Adjustment Advanced Settings Setup Reset Reset All OSD Rotate 1 Landscape 2 Portrait Advanced Settings LAXA Thi Configures the settings more elaborately Temperature Configures the setting for the Temperature function which detects the internal temperature for the product s protection Note For Magiclnfo connections the Temperature menu changes to Fan amp Temperature The Fan Control and Fan Speed Setting submenus are configurable Fan amp Temperature Protects the product by detecting the fan speed and internal temperature Fan Control Fan Speed Setting Temperature Control Selects auto or manual for the fan speed settings ex Auto Adjusting the LCD Display e Manual Fan Speed Setting Fan Control Manual 17 i F er ii Temperature Control Sets the fan speed within a range of 0 and 100 net Note Enabled when Fan Control is set to Manual
108. pported if the Size is set to 16 9 Adjusting the LCD Display Setup Reset T lu Reset Settings in Setup Ves No Reset all the values for a setting Reset All L 75 All Settings return to default settings Yes No Reset all the settings for the display Multi Control Available Modes e J PC DVI DisplayPort gt Elav 5 Component gt HDMI M Magicinfo gt TV Note A TV tuner box sold separately must be connected to use the TV US Only ry Musing Magicilnfo To use Magiclnfo with an TSn 3 model install inside the product a network box specified by Samsung and connect the Magiclnfo output on the network box to HDMI IN 2 MAGICIN FO on the product Multi Control 1S 1551 Assigns an individual ID to the SET TAO BATI ID Setup 00 ID Input MBC Connection a RI45 MIOC Network Setting e ID Setup Assigns distinctive IDs to the SET Magicilnfo Adjusting the LCD Display ID Input Use to select the transmitter functions of the individual SET Only a SET where the ID corresponds to the transmitter setting becomes activated MDC Connection Selects a port to receive the MDC inputs from e RS232C MDC Communicates with the MDC via a RS232C MDC cable e RJ45 MDC Communicates with the MDC via an RJ45 MDC cable Network Setting e IP Setting Manual Auto e IP Address Manually enter the IP Address if IP Setting is set to Manual e Subnet Mask Manually e
109. r 3 Ensure that at least two persons lift and move the product e Otherwise it may be dropped and cause personal injury and or damage the product 3 When installing the product in a cabinet or rack make sure that the front end of the bottom of the product does not project out e Otherwise it may fall or cause personal injury e Use a cabinet or rack of a size appropriate to the product Safety Instructions 3 DO NOT PLACE CANDLES MOSQUITO REPELLANT CIG ARETTES AND ANY HEATING APPLIANCES NEAR THE 3 7 dy PRODUCT e Otherwise this may result in fire Keep heating appliances as far away from the power cord or the product as possible J Otherwise this may result in electric shock or fire 3 Do not install it in a badly ventilated location such as a bookcase KI or closet e Otherwise this may result in fire due to an increase in the in ternal temperature L When putting the product down make sure to put it down softly s dm Otherwise this may result in damage to the screen display CJ Do not place the front of the product on the floor e Otherwise this may result in damage to the screen display 3 Ensure that an authorized installation company installs the wall mount e Otherwise it may fall and cause personal injury e Make sure to install the specified wall mount 3 Install your product in a well ventilated location Ensure that there is a
110. rough Saturday e Sat Sun The Timer repeats from Saturday to Sunday e Manual Select a day of the week you want the Timer to go off 2 Setting Holiday Management The Holiday Management function specifies the dates in which the monitor will not be turned on or off by the Timer Holiday Management 1 Specifies the date 2 Delete All Deletes all of the holidays 3 Add Adds the specified date 4 lun Deletes the schedule in the selected line The Holiday Management function can be turned on or off in the Timer setup menu The Input source of Magicl nfo works only on Magici nfo model The Input source of TV works only on TV model Time Control is available only for the displays for which the power status is ON amp Only enabled for a TV when Source is set to TV in On Time mode k Only enabled for a model with Magicl nfo installed when Source is set to Magicl nfo in On Time mode NG PIP PIP Size 1 Click PIP of the main icons and the PIP control screen appears Selects displays you want to adjust using the Select button or checkboxes Multiple Display Control File Remote Control Safety Lock Port Selection Lamp Control Options Help Refresh Ye Info Grid shows some basic information necessary to PIP Size Control 1 PIP Size Shows the current PIP Size of the display in use 2 OFF Turns off the PIP of the selected display 3 Large Turns on the PIP of the selected display
111. selected display to HDMI 11 DP Switches the PIP Source of the selected Display to DP XX Some of the PIP Sources may not be available for selection depending on the input sou of the Main Screen The PIP Control feature is available only for the displays whose power status is ON and function Is set to ON HDMI2 may not be supported depending on the product DP may not be supported depending on the product The Input source of Magicl nfo works only on Magicl nfo model HDMI2 may not be supported depending on the product Picture 1 Click Settings of the main icons and the Settings Control screen appears Multiple Display Control Elem File AddaDevice Remote Control SefetyLock Fault Device Alet Lamp Conirol Help PA Faulty Device U SelectAll ClearAll Refresh idle mo m n Picture lo O AY Mm IVAV S Video Component HDMMH HDMIZ DTV 1 Brightness bit Cl 3 5 4 i Sharpness A Color 5 1 Tint Color lone at PF LIU a B JColor Temp 10000K Brightness Sensor R a 10 Dynamic Contrast Basic information required to adjust the Picture is displayed in the main menu Settings for the selec monitor will be displayed if one of the connected monitors is selected and the default settings will k displayed if all monitors are selected by clicking All and Select If a value is changed in this screen t mode will automatically switch to custom mode 1 Picture Available only for
112. settings Picture AV HDMI TV Component Mode Available Modes e J PC DVI DisplayPort e Eav 5 Component gt HDMI M Magicinfo gt TV Note A TV tuner box sold separately must be connected to use the TV US Only Adjusting the LCD Display Musing Magiclinfo To use Magiclnfo with an TSn 3 model install inside the product a network box specified by Samsung and connect the Magiclnfo output on the network box to HDMI IN 2 MAGICIN FO on the product Mode Su Custom Color Tone size Digital NR More The LCD Display has four automatic picture settings Dynamic Standard Movie and Custom that are preset at the factory Note Not available when Dynamic Contrast is set to On 1 Dynamic 2 Standard 3 Movie 4 Custom Custom LS By using the on screen menus the contrast and brightness can be changed to your personal preference ae Note Not available when Dynamic Contrast is set to On Contrast Adjusts the Contrast Brightness Adjusts the Brightness Sharpness Adjusts the picture Sharpness Adjusting the LCD Display Color Adjusts the picture Color Tint Adds a natural tone to the display pia Note The Tint slider is only displayed when input source is HDMI Component or AV Color Tone LHI Mode Custom 4 Han NR w hlor The Color tones can be changed The individual Color components are also user adjustable
113. several basic data items appears 1 Maintenance Allows the Maintenance Control function for all input sources 2 Lamp Control Automatically adjusts the backlight of the selected display at a specified time The Manual Lamp Control automatically turns off if you adjust using the Auto Lamp Control Allows you to adjust the backlight of the selected display regardless of the time The Auto Lamp Control automatically turns off if you adjust using the Manual Lamp Control 3 Ambient Light Detects the ambient light intensity at the designated monitor and automatically adjusts the picture brightness You can specify a Reference value and designate a monitor that will automatically determine Lam the light intensity from the lamp based on the ambient light intensity Ambient Light is only supported for models that have a brightness sensor and is only en when Ambient Brightness Mode is selected in the Lamp Control menu Auto Lamp Control and Manual Lamp Control are only enabled when User Control Mode selected in the Lamp Control menu The Maintenance Control feature is available only for the displays whose power status i The Input source of Magicl nfo works only on Magicl nfo model The Input source of TV works only on TV model J Maintenance Y Scroll 1 Click on the Maintenance icon in the Main Icon column to display the Maintenance screen 1 Multiple Display Control Fie AddeDewice Remote Control Set
114. supg 3 No Signal OSD Sets whether the No Signal OSD will be displayed to indicate when there is no signal 4 MDC OSD Sets whether the MDC OSD will be displayed to indicate when the settings are changed using the E Network Multiple Display Lontrol File AddaDewce Remote Control SofetyLock Fault Device Alert Lamp Control Help aea Faulty Device U e 1 Select All Clear Ali Refresh Delete Idle Enable Disable IP Address I0 5 Subnet Ne a wi CN so Galeway ig BB Apply C a o o ol o q e BO o LET o lg m kf elk 2 4 1 Select or clear all the added devices or refresh or delete selected devices 2 The IP Address ID Ethernet or Serial Mac Address and connection status of the connected monitc 3 It can automatically check whether DHCP IP is set and then set the IP address 4 It can automatically or manually set and then apply the IP Address Subnet and Gateway of the sele aw Input Source Wa Click Input Source of the main icons and the Input Source control screen appears Selects displays you want to adjust using the Select All button or checkboxes 1 e TV Mode Multiple Visplay Control Fila AddaDevice Remote Control SatetyLock Fault Device Alert Faulty Device U Select All Clear All Refresh idle Choose Input Source PC AV 6 D O O S5 Vidoo i T oy hy i omponent B k Tv Plea g DTV HOMI pil Channel
115. t ex DVI PC e AV PC ex HDMI PC e DisplayPort PC Size PIP Source Position Transparency Changes the Size of the PIP window Position LT PIF Source Sie Transparency Changes the Position of the PIP window Transparency SOUNE SIZE Position Adjusts the Transparency of PIP windows e High e Medium e Low Edit Name Adjusting the LCD Display Opaque Pt DVI AV Component HDMI1 HDMI2 DisplayPort Name the input device connected to the input jacks to make your input source selection easier VCR DVD Cable STB HD STB Satellite STB AV Receiver DVD Receiver Game Camcorder DVD Combo DHR PC DVI PC DVI Devices E Note The displayed devices differ depending on the external input mode When connecting a PC to the HDMI terminal set Edit Name to PC In other cases set Edit Name to AV However since 640x480 720P 1280x720 and 1080p 1920x1080 are common signals for AV and PC make sure to set the Edit Name in accordance with the input signal When a PC is connected set Edit Name to DVI PC to enjoy the video and audio from the connected PC When an AV device is connected set Edit Name to DVI Device to enjoy the video and audio from the connected AV device Source AutoSwitch Settings LAXA il Turning on the display with Source AutoSwitch On and the previous video source selection is not active the display will automatically search
116. t be supported depending on the product The Input Source Control feature is available only for the displays whose power status i TV Source can be selected only in products with TV and controlling channels is allowed Input Source is TV EO I mage Size PC BNC DVI DP 1 Click Image Size of the main icons and the Image Size control screen appears Multiple Display Control A pes File AddaDevice Remote Control SafetyLock Fault Device Alert Lemp Control Help SAMSUNG DAIT ai Faulty Device 0 Select All Clear All Refresh ldle Image Size PC Source 4 5 Ajo O 1 B NG Dp amp PC BNC DVI DP Ce ee Je Info Grid shows some basic information necessary to Image Size Control 1 Power Status Shows the power status of the current display 2 Image Size Shows the current Image Size of the display in use 3 Input Info Grid displays only the displays whose Input Source is PC BNC DVI and DP 4 PC Source Click Image Size in the main menu to display the PC BNC DVI and DP tabs The Image Size Control button controls Image Size available for PC BNC DVI and DP 5 Video Source Click the Video Source tab to control Image Size for respective Input Source amp The Input source of Magicl nfo works only on Magicl nfo model The Input source of TV works only on TV model Image Size Control is available only for the displays for which power status is ON DP may not be suppor
117. ted depending on the product EG I mage Size TV AV S Video Component DVI HDCP HDMI 1 HDMI 2 DTV 1 Click Image Size of the main icons and the Image Size control screen appears Multiple Display Control 4 X File Adda Device Remate Control Sofety Lock Fault Device Alert Lamp Control Help SAMSUNG DIGITa Faulty Device U Idle Select All Clear All Refresh 1 Video Source A TV AV 5 Video Component HDMl1 HOMI2 OTW Image Size Auto Wide 16 9 Wide Zoom Zoom Toom 1 Zoom 7 4 3 Screen Fit Wide Fit Custom Wide Zoom 44 16 9 a 2 4 Zoom a 3 Je Info Grid shows some basic information necessary to Image Size Control 1 To adjust Image Size in TV AV S Video Component HDMI1 HDMI2 or DTV mode click the Video tab Select the display you want to adjust by using the Select All button or by checking the checkbox 2 Info Grid displays only the display having TV AV S Video Component HDMI1 HDM12 or DTV as in 3 Switch Image Size of the selected display randomly 4 The screen modes can only be adjusted when a TV PAL only is connected and the Image Size iten Auto Wide Custom may not be supported depending on the product Auto Wide Zoom1 and Zoom2 are not available for selection when the input signal type Component and DVI HDCP is 720p or 10801 The Auto Wide mode is available only for TV AV and S Video The Input source of Magicl nfo works only on Mag
118. tem allows controlling some of the functions of the selected display 1 Power On Off Turns the power of the selected display On Off 2 Volume Controls the volume level of the selected display It receives the volume value of the selected display from the sets and displays it in the slider If you deselect a single display or all displays the default value 10 will be restored 3 EB Mute On Off Turns on off the Mute function of the selected display When selecting one set at a time turn on the Mute function for the selected set The Mute function is disabled automatically when you adjust the volume level The values return to the default settings when you undo the selections or choose Select All The Volume Control and Mute features are available only for the displays whose power ON 3 Selects whether to display the menu screen using the OSD Display menu Multiple Display Control E E Fie AddeDewice Remote Control Setety Lock Fault Device Alert Lamp Control Help SAMSUNG DIGITad Faulty Device U Select All Clear All Refresh ites ic Input mage Size On Time Elo loo Volume Hd an E O5D Display 2 Not Optimum Mode OSD 9 No Signal OSD 4 Mpc OSD 1 Source OSD Sets whether the Source OSD will be displayed to indicate when the Source is changed 2 Not Optimum Mode OSD Sets whether the Optimum Mode OSD will be displayed to indicate if the current mode is not
119. tes with a VESA DPM compliant video card installed in your computer Use the software utility installed on your computer to set up this feature PowerSaverd State Normal Op Power sav Power off Power off eration ing mode Power Swich Power Indicator On Blinking Amber Off Power Consumption 177 Watts 5 Watts 5 Watts 0 Watts Specifications State Normal Op Power sav Power off Power off eration ing mode Power Swich Typical 603 57 17 05 BTU 17 05 BTU 0 BTU h yP BTU h h h NG Note The actual power consumption may be different from the indicated power consumption above if the system conditions or settings are changed To stop any power consumption turn off the switch or disconnect the power cable on the back Be sure to disconnect the power if you intend to stay away from home for many hours Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes the screen will be adjusted automatically However if the signal differs the screen may go blank while the power LED is on Refer to the video card manual and adjusts the screen as follows Display Mode Horizontal Vertical Fre Pixel Clock Sync Polarity Frequency quency Hz MHz H V kHz IBM 640 x 350 31 469 70 086 25 175 IBM 640 x 480 31 469 59 940 25 175 IBM 720 x 400 31 469 70 087 28 322 MAC 640 x 480 35 000 66 667 30 240 MAC 832 x 624 49 726 74 551 57 284 MAC 1152 x 870 68 681
120. the different video input sources for active video Note If the display TV source is active TV tuner connected to the display the Source AutoS witch search function becomes inactive The display will remain in the TV source Source AutoSwitch selection and PIP function If the Source AutoSwitch selection is set to On the PIP function will not work the Source AutoSwitch selection must be set to Off for the PIP feature to work When the Source AutoSwitch selection is On and or the Primary Source Recovery is On the display power saving mode becomes inactive When Primary Source Recovery is On only the Primary Source and Secondary Source selection are available and they are interchangeable and selectable at will Refer to PIP gt Source for compatible signals for each primary input source Adjusting the LCD Display Source AutoSwitch Primary Source Recovery Primary Source Secondary Source 2 Move Enter Y Return When the Source AutoSwitch is On the display video source will automatically be searched for active video The Primary Source selection will be activated if the current video source is not recognized Secondary source selection will become active if no primary video source is available If the primary or secondary source is not recognized the display will search again if no active video is found the display will show the no input signal message When the Primary Source selection is set to All the d
121. the product disconnect the power cord and contact a Service Center e Otherwise this may result in electric shock or fire L When using a fixed screen for a long time an afterimage or stain may occur e lf you are not using your product for a long period of time put it into sleep mode or use a moving screen saver Safety Instructions 3 Set a resolution and frequency appropriate to the product e Otherwise your eyesight may be damaged L When using headphones or earphones do not turn the volume too high e Having the sound too loud may damage your hearing L To avoid eyestrain do not sit too close to the product 3 Take a rest for at least five 5 minutes after using the monitor for one 1 hour This reduces eye fatigue O Do not install it in an unstable location such as an unstable rack or uneven surface or a location exposed to vibrations e Otherwise it may fall and cause personal injury and or damage the product e lf you use the product in a location exposed to vibrations it may damage the product and result in fire IL When moving the product turn the power off and disconnect the power plug antenna cable and all the cables connected to the product e Otherwise it may result in electric shock or fire L Ensure that children do not hang onto the product or climb up onto the product e The product may fall and cause personal injury or death 3 If you do not use the product for a l
122. they purchased this product or their local government office for details of where and how they can take these items for environmentally safe recycling Appendix Correct Disposal of This Product Waste Electrical amp Electronic Equipment Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic ac cessories should not be mixed with other commercial wastes for disposal Correct disposal of batteries in this product Europe only Applicable in the European Union and other European countries with K separate battery return systems This marking on the battery manual or packaging indicates that the bat teries in this product should not be disposed of with other household waste at the end of their working life Where marked the chemical sym bols Hg Cd or Pb indicate that the battery contains mercury cadmium or lead above the reference levels in EC Directive 2006 66 If batteries are not properly disposed of these substances can cause harm to human health or the environment To protect natural resources and to promote material reuse please sep arate batteries from other types of waste and recycle them through your local free battery return system Note The rechargeable battery incorporated in this product is not user replaceable For information on its replacement please contact your service provider Authority Information in this document
123. ttp www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com be Dutch BOSNIA BULGARIA CROATIA CZECH DENMARK FINLAND FRANCE GERMANY CYPRUS GREECE HUNGARY ITALIA KOSOVO LUXEMBURG MACEDONIA MONTENEGRO NETHERLANDS NORWAY POLAND PORTUGAL RUMANIA SERBIA SLOVAKIA SPAIN SWEDEN Appendix Europe http www samsung com be fr French 05 133 1999 http www samsung com 07001 33 11 http www samsung com 062 SAMSUNG 062 726 http www samsung com 7864 800 SAMSUNG http www samsung com 800 726786 Samsung Electronics Czech and Slovak r o Oasis Florenc Sokolovsk 394 17 18000 Praha 8 70 70 19 70 030 6227 515 01 48 63 00 00 01805 SAMSUNG http www samsung com 726 7864 E 0 14 Min From landline 8009 4000 From landline 80111 SAM http www samsung com SUNG 7267864 http www samsung com http www samsung com http www samsung com http www samsung com From landline amp mobile 30 210 6897691 06 80 SAMSUNG 726 7864 http www samsung com 800 SAMSUNG 726 7864 381 0113216899 http www samsung com http www samsung com 261 03 710 http www samsung com 023 207 777 http www samsung com 020 405 888 http www samsung com 0900 SAMSUNG 0900 7267864 0 10 Min 815 56 480 http www samsung com 0 80
124. ure that the power plug is plugged into the power outlet firmly and correctly e Otherwise this may result in fire 3 Do not forcefully bend or pull the power plug and do not place any heavy material on it e Otherwise this may result in fire L Do not connect multiple appliances to the same power outlet e Otherwise this may cause fire due to overheating L Do not disconnect the power cord while using the product e Otherwise this may result in damage to the product due to electric shock L To disconnect the apparatus from the mains the plug must be pulled out from the mains socket therefore the mains plug shall be readily operable e Otherwise this may cause electric shock or fire J Use only the power cord provided by our company Do not use the provided power cord of another product e Otherwise this may result in fire or electric shock Connect the power plug to a wall outlet that can be easily reached e When a problem occurs with the product you must unplug the power plug to cut the power off completely You cannot cut the power off completely using only the power button on the prod uct Be sure to contact an authorized Service Center when installing your monitor in a location with heavy dust high or low temperatures high hu midity and exposed to chemical substances and where it operates for 24 hours such as at airports train stations etc Failure to do so may cause serious damage to your monito
125. usts selected menu values When OSD is not on the screen press the button to adjust volume ENTER button ENTER Activates a highlighted menu item SOURCE button SOURCE Switches from PC mode to Video mode Selects the input source that an external device is connected to PC DVI AV Component HDMI1 HDMI2 Dis playPort Magiclinfo TV Note e The RGB COMPONENT IN port is compatible with RGB PC and Component signals However the picture may display abnormally if the connected external input signal is different from the selected video signal e ATV tuner box sold separately must be connected to use the TV US Only Using Magiclnfo To use MagiclInfo with an TSn 3 model install inside the product a network box specified by Samsung and connect the Magiclnfo output on the net work box to HDMI IN 2 MAGICINFO on the product Introduction D MENU button Opens the on screen D MENU Note The D MENU button is activated when a TV tuner is connected and oth erwise the PIP button is enabled PIP button Push the PIP button to turn the PIP screen On Off Power button Use this button for turning the LCD Display on and off Brightness Sensor Automatically detects the surrounding brightness Power indicator Shows PowerSaver mode by blinking green Note See PowerSaver described in the manual for further information regarding power savi
126. with a different layout when dividing e Select a mode in Screen Position e Select a display in Display Selection e The selection will be set up by pressing a number in the selected mode e The screen can be split into a maximum of 100 sub screens Note When more than four displays are connected we recommend a resolution of XGA 10247768 or greater to prevent any picture degradation Safety Screen LAXA Th The Safety Screen function is used to prevent afterimages that may appear when a still picture is displayed on the screen over a long time FEZ Note This function is not available when the power is turned off Pixel Shift Pixel Shift Off Horizontal Vertical 4 Time 4 min o Move Enter Return To prevent after images on the screen you can use this function to have pixels move on the LCD in the horizontal or vertical direction e Off e On Adjusting the LCD Display Horizontal Pixel Shift Vertical Time 4 min Sets how many pixels the screen moves horizontally Five adjustment levels 0 1 2 3 and 4 Vertical Pixel Shift Horizontal Time A min Sets how many pixels the screen moves vertically Five adjustment levels 0 1 2 3 and 4 Time Pixel Shift Horizontal Vertical Set the time interval for performing the horizontal or vertical movement respectively Timer Timer Of Mode Period 1 Hour Time 10 sec You can set the timer
127. ww samsung com 0302 200077 KENYA 0800 724 000 http www samsung com NIGERIA 0800 726 7864 http www samsung com SENEGAL 800 00 0077 http www samsung com SOUTH AFRICA 0860 SAMSUNG 726 7864 http www samsung com TANZANIA 0685 88 99 00 http www samsung com UGANDA 0800 300 300 http www samsung com Terms Dot Pitch The image on a monitor is composed of red green and blue dots The closer the dots the higher the resolution The dis Vertical Frequency Horizontal Frequency Interlace and Non Interlace Methods Plug amp Play Resolution Correct Disposal Appendix tance between two dots of the same Color is called the Dot Pitch Unit mm The screen must be redrawn several times per second in order to create and display an image for the user The fre quency of this repetition per second is called the Vertical Frequency or Refresh Rate Unit Hz Example If the same light repeats itself 60 times per sec ond this is regarded as 60 Hz The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle The inverse number of the Horizontal Cycle is called Horizontal Frequency Unit kHz Showing the horizontal lines of the screen from the top to the bottom sequentially is called the Non Interlace method while showing odd lines and then even lines in turn is called the Interlace method The Non Interlace method is used for the majority of monitors to
128. y 0 5 or 1 seconds The LCD Display is using its power management system Press any key on the key board Problems related to Audio Note Problems related to audio signals and their solutions are listed below Q A O Q A No sound Ensure that the audio cable is firmly connected to both the audio in port on your LCD Display and the audio out port on your sound card Refer to the Connecting a Computer Check the volume level The sound level is too low Check the volume level If the volume is still too low after turning the control to its maximum check the volume control on the computer sound card or software Program The sound is too high or too low Adjusts the Treble and Bass to the appropriate levels Problems related to the Remote Control Note Problems related to the remote control and their solutions are listed Q o da ee oe The remote control buttons do not respond Check the polarities of the batteries Check if the batteries are empty Check if the power is on Check if the power cord is securely connected Q amp A Troubleshooting A Check if a special fluorescent or neon lamp is on in the vicinity Q How can I change the frequency The frequency can be changed by reconfiguring the video card Note That video card support can vary depending on the version of the driver used Refer to the computer or the video card manual for details Q How can
129. y public recycling center or to a store selling the same type of the battery or rechargeable battery 3 Do not place the product in a location exposed to direct sunlight or near any heat such as a fire or heater e This may reduce the lifetime of the product and may result in fire L Do not drop any objects onto the product or cause any impact to the product e Otherwise this may result in electric shock or fire 3 Do not use a humidifier near the product e Otherwise this may result in electric shock or fire L When there is a gas leak do not touch the product or the power plug ventilate immediately e Ifa spark occurs it may cause an explosion or fire L If the product has been turned on for a long time the display panel becomes hot Do not touch it Keep the small accessories in a location out of the reach of children L Be careful when adjusting the angle of the product or the height of the stand e This may result in personal injury as your hand or fingers may become caught e Also if you tilt the product too far it may fall and cause personal injury Safety Instructions 3 Do not install the product in a location low enough for children to reach e Otherwise it may fall and result in personal injury e Since the front part of the product is heavy install the product on a level and stable surface L Do not put any heavy objects on the product e This may result in personal injury and or

Samsung 320TSn-3

Contents

Download Pdf Manuals

Related Search

Related Contents