Home

VIZIO E322MV LED TV

image

Contents

1. Select Preset for White Balance Adjustment 23 Enabling or Disabling Color Enhancement Color enhancement reduces oversaturation of some colors and improves flesh tones N To adjust this setting Picture Mode must be set to Custom To enable or disable the color enhancement setting 1 Press the OK button on the remote The on screen menu is displayed Use the Arrow buttons to highlight Picture and press OK Use the Arrow buttons to highlight More and press OK 2 3 4 Usethe Arrow buttons to highlight Color Enhancement 5 Usethe Left Right Arrow buttons to change the setting to Off or On 6 Press EXIT Enabling or Disabling Adaptive Luma Adaptive luma adjusts the average brightness of the picture to compensate for large areas of brightness adjust this setting Picture Mode must be set Custom To enable or disable the adaptive luma setting 1 Press the OK button on the remote The on screen menu is displayed Use the Arrow buttons to highlight Picture and press OK Use the Arrow buttons to highlight More and press OK Use the Arrow buttons to highlight Adaptive Luma Use the Left Right Arrow buttons to change the setting to Off or On oS der e c dq Press EXIT 24 E322MV Enabling or Disabling DCR Dynamic Contrast Ratio Dynamic contrast ratio changes contrast according to displayed content for the best picture quality adjust this setting Picture M
2. 31 GHEET ER Limited Warranty sss 33 ON FARTS AND LABOR eege 33 eieiei 33 Type ee 30 Limitations and Mee ul 39 Sein zl MISERERI RONDE 33 Installing the TV Inspecting the Package Contents Installing the TV Before installing your new TV take a moment to inspect the package contents After removing the TV from the box and inspecting the package contents you can Use the images below to ensure nothing is missing or damaged begin installing the TV Your TV can be installed in two ways When you have completed your inspection install the TV e flat surface using the included stand e Ona wall using a VESA standard wall mount not included Installing the TV Stand Your TV includes a stand designed to support the weight of the TV and keep it from falling over However the TV can still fall over if e tis placed on an uneven unstable or non level surface e tis pushed pulled or otherwise improperly moved e If an earthquake occurs and the TV is not properly secured To install the TV stand 1 Place the TV screen down on a clean flat surface To prevent scratches or damage to the screen place the TV on a soft surface such as carpet rug or blanket VIZIO LCD HDTV with Stand User Manual and Remote Control with Quick Start Guide Batteries 2 Align the base with the stand neck Gently push the base onto the stand neck If the base is not joining with the st
3. V pP E322MV Ki 56150 S S e TruSurround HD TruVolume SRS TruSurround HD and SRS TruVolume are trademarks of SRS Labs Inc TruSurround HD and TruVolume technologies are incorporated under license from SRS Labs Inc ENERGY STAR This product qualifies for ENERGY STAR in the factory default setting and this is the setting in which power savings will be achieved Changing the factory default picture settings or enabling other features will increase power consumption that could exceed the limits necessary to qualify for ENERGY STAR rating I DOLBY DIGITAL Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories HOM HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC Welcome Thank You for Choosing VIZIO And congratulations on your new VIZIO HDTV To get the most out of your new VIZIO product read these instructions before using your product and retain them for future reference Be sure to inspect the package contents to ensure there are no missing or damaged parts Product Registration To purchase or inquire about accessories and installation services for your VIZIO product visit our website at www VIZIO com or call toll free at 1 888 849 4623 We recommend that you either e Register your VIZIO product at www VIZIO com e Complete and m
4. Resetting the Content Locks To reset the content locks to the factory default settings 1 From the Parental Controls menu highlight RESET LOCKS and press OK The TV displays Are you sure you want to RESET ALL LOCKS SETTINGS to the factory defaults 2 Highlight Yes and press OK Changing the On Screen Menu Language Your TV can display the on screen menu in different languages To change the on screen menu language 1 Press the MENU button on the remote The on screen menu is displayed VIZIO 4 Menu Language 2 Use the Arrow buttons on the remote to highlight the TV icon and press OK The TV Settings menu is displayed Frangais Espanol English 3 Usethe Arrow buttons to highlight Menu Language and press OK 4 Usethe Arrow buttons to highlight your preferred language and press OK 5 Press EXIT 15 setting the TV s Date and Time From the Date amp Time menu you can e Set the time zone e Adjust the time for daylight savings e Enable or disable automatic date and time updates e Set the current date and time Setting the Time Zone To set the time zone 1 Press the MENU button on the remote The on screen menu is displayed VIZIO 4 Time amp Local Settings 2 Use the Arrow buttons on the remote to highlight the TV icon and press OK The TV Settings menu is displayed Time Zone Daylight Savings Auto Update Date amp Time 3 Use the Arrow buttons to highlight Time
5. Mode 3 Use the Arrow buttons to highlight _ Bass Equalizer Settings and press OK Treble 4 Use the Arrow buttons to highlight one of the following settings and press OK e Classical e Disco e Flat e Jazz e Pop e Rock Select Audio Mode Flat Rock Pop etc 5 Press EXIT 25 Adjusting Bass and Treble Levels The bass and treble levels for your TV s built in soeakers can be adjusted to your liking To adjust the bass and treble levels SRS TruSurround HD must be set to Off To adjust the bass and treble levels 1 Press the OK button on the remote The on screen menu is displayed VIZIO 4 Equalizer Settings 2 Use the Arrow buttons to highlight Audio and press OK Q rode 2 Bass Gest 50 3 Use the Arrow buttons to highlight Treble 50 Equalizer Settings and press OK 4 Use the Arrow buttons to highlight Bass or Treble and press OK 5 Use the Left Right Arrow buttons to increase or decrease the level 6 When you are finished press EXIT Adjusting the Speaker Balance The built in speakers can be adjusted to distribute the sound between the left and right speakers To adjust the speaker balance 1 Press the OK button on the remote The on screen menu is displayed 2 Usethe Arrow buttons to highlight Audio and press OK 3 Usethe Arrow buttons to highlight Balance and press OK 4 Use the Arrow buttons to adjust the speaker balance e To increase the loudness of the
6. 30 39 x 20 79 x 6 34 30 39 x 19 21 x 2 13 20 2 Ibs 18 2 Ibs LED 60 Hz 1920 x 1080 0 3635 mm x 0 3635 mm 100 000 1 176 H x 176 V 6 5 ms 450 nits 3 1 1 1 1 1 with 3 5mm Audio In English Spanish French Optical Digital Audio Out 3 5mm Stereo 2 10W SRS TruSurround HD Dolby Digital Sound Leveler Ambient Light Sensor Compliance Power Consumption Voltage Range Standby Power Operating Temperature Non Operating Temperature Operating Humidity Non Operating Humidity Specifications SRS TruVolume Yes Energy Star FCC Class B HDMI 1 3 UL CUL 105W 120 240 VAC 50 60 Hz 1W 32 to 95 4 to 140 F 10 90 Relative Non condensing 10 70 Relative Non condensing Limited Warranty ON PARTS AND LABOR Covers units purchased as new in United States and Puerto Rico Only VIZIO provides a warranty to the original purchaser of anew Product against defects in materials and workmanship for a period of one 1 year of non commercial usage and ninety 90 days of commercial use If a Product covered by this warranty is determined to be defective within the warranty period VIZIO will either repair or replace the Product at its sole option and discretion To obtain warranty service contact VIZIO Technical Support via e mail TechSupport VIZlO com or via phone at 877 MY VIZIO 877 698 4946 from 6 00AM to 9 00PM Monday through Friday and 8 00AM to 4 00PM Satu
7. amp Local Settings and press OK 4 Use the Arrow buttons to highlight Time Zone and press OK 5 Use the Arrow buttons to highlight your time zone and press OK 6 Press EXIT 16 E322MV Adjusting the Time for Daylight Savings This setting will automatically adjust the time for zones which recognize daylight savings time To enable or disable the daylight savings adjustment 1 2 3 4 5 6 Press the MENU button on the remote The on screen menu is displayed Use the Arrow buttons on the remote to highlight the TV icon and press OK The TV Settings menu is displayed Use the Arrow buttons to highlight Time amp Local Settings and press OK Use the Arrow buttons to highlight Daylight Saving Use the Arrow buttons to change the setting to Enable or Disable Press EXIT Enabling or Disabling Automatic Date and Time Updates The current date and time is broadcast digitally in many areas Your TV can automatically set the time and date using this information When this setting is enabled you cannot manually set the date and time To enable or disable automatic updates Te o e e pW Press the MENU button on the remote The on screen menu is displayed Use the Arrow buttons on the remote to highlight the TV icon and press OK The TV Settings menu is displayed Use the Arrow buttons to highlight Time amp Local Settings and press OK Use the Arrow buttons to highlight Auto Update Use the Arrow
8. Disabling SRS TruSurround HD TruSurround HD is a robust multichannel virtualization technology developed by SRS Labs that provides an enhanced listening experience unlike any other technology offered for a two speaker playback environment To enable or disable SRS TruSurround HD 1 Press the OK button on the remote The on screen menu is displayed 2 Usethe Arrow buttons to highlight Audio and press OK 3 Usethe Arrow buttons to highlight SRS TruSurround HD 4 Press the Right Left Arrow buttons to select On or Off and press EXIT Enabling or Disabling SRS TruVolume SHS TruVolume intelligently normalizes volume fluctuations due to television commercials or channel changes To enable or disable SRS TruVolume 1 Press the OK button on the remote The on screen menu is displayed 2 Usethe Arrow buttons to highlight Audio and press OK 3 Usethe Arrow buttons to highlight SRS TruVolume 4 Press the Right Left Arrow buttons to select On or Off and press EXIT Adjusting the Equalizer Settings Your TV features six preset equalizer settings These settings allow you to customize your TV s sound to match the type of programming you most often enjoy To adjust the equalizer settings menu SRS TruSurround HD must be set to Off To adjust the equalizer settings 1 Press the OK button on the remote The on screen menu is displayed VIZIO 2 Use the Arrow buttons to highlight Equalizer Settings Audio and press OK
9. To go to the previous photo press the Stop button e To exit the slideshow press the EXIT button 28 E322MV Viewing System Info and Resetting to Factory Defaults Restarting the Setup Wizard The TV s Setup App can be used to easily set up the TV tuner You can use the TV s Help menu to To access the Setup App e Display system information e Restore the TV to its factory default settings 1 Press the MENU button on the remote The on screen menu is displayed e Restart the Setup Wizard 2 Use the Arrow buttons on the remote to highlight the Help icon and press OK The Help menu is displayed Displaying System Information 3 Highlight Start Setup Wizard and press To display a summary of the TV settings M 4 Use the Number Pad to enter your parental PIN If you have not yet set 1 Press the MENU button on the remote The on screen menu is displayed your PIN enter 0000 2 Usethe Arrow buttons on the remote to highlight the Help icon and press 5 The TV displays Are you sure you want to RESET SETUP WIZARD OK The Help menu is displayed 3 Highlight System Info and press OK The system information is displayed Highlight OK and press OK 4 When you are finished reviewing the system information press the EXIT button on the remote Restoring the TV to the Factory Default Settingss All of the on screen menu settings can be reset to the factory defaults If you restore the TV to the factory defaul
10. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE CHECK WWW VIZIO COM FOR THE MOST CURRENT VERSION Personal Data If your VIZIO product is capable of storing personal data and other information ALL CONTENTS AND INFORMATION WILL BE DELETED IN THE COURSE OF SOME IN HOME AND ALL SHIP IN WARANT Y SERVICE If this occurs your product will be restored to you configured as originally purchased You will be responsible for restoring all applicable data and passwords Recovery and reinstallation of user data is not covered under this Limited Warranty In order to protect your personal information VIZIO recommends that you always clear all personal information from the unit before it is serviced regardless of the servicer Zero Bright Pixel Defect Guarantee This policy covers zero bright pixel defects for the duration of the limited ONE YEAR WARRANTY on select new product purchases To determine if this guarantee applies to your product refer to the DETAILS tab of the model s product information page www VIZIO com or look for the zero bright pixel guarantee on the box 33 Legal amp Compliance FCC Class B Radio Interference Statement NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a
11. an extremely high level of technology However sometimes pixels may not display correctly These types of occurences are inherent to this type of product and do not constitute a defective product see noise or static on the screen e When your TV s digital capabilities exceed a digital broadcast signal the signal is up converted improved to match your TV s display Capabilities This up converting can sometimes cause irregularities in the image e f you are using an antenna the signal strength of the channel may be low Ensure your antenna is connected securely to the TV and move the antenna around the room or close to a window for the best signal When I change input source the volume changes e The TV remembers the volume level on each input source If the volume level on the new input source is higher or lower than the level on the source you switch from the difference may be noticable e Use the Volume Up Down buttons on the remote to adjust the volume 31 Screen Size Diagonal Viewable Dimensions w Stand w o Stand Weight w Stand w o Stand TV Type Refresh Rate Maximum Resolution Pixel Pitch Dynamic Contrast Ratio Viewing Angle Response Time Brightness HDMI Inputs Component Video Inputs Composite Inputs RF Coaxial Input USB Ports RGB Inputs OSD Language Audio Outputs Number of Speakers Watts Channel Simulated Surround 32 32 Class 31 50
12. cover user abuse or improper installations The power cord must be replaced when using different voltage than the voltage specified For more information contact your dealer Your TV is equipped with a three pronged grounded plug a plug with a third grounding pin This plug will fit only into a grounded power outlet This is a safety feature If your outlet does not accommodate the three pronged have an electrician install the correct outlet or use an adapter to ground your TV safely Do not defeat the safety purpose of the grounded plug When connected to a power outlet power is always flowing into your TV To totally disconnect power unplug the power cord The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un isolated dangerous voltage within the inside of your TV that may be of sufficient magnitude to constitute a risk of electric shock to persons E322MV Do not overload power strips and extension cords Overloading can result in fire or electric shock The wall socket should be installed near your TV and easily accessible Only power of the marked voltage can be used for your TV Any other voltage than the specified voltage may cause fire or electric shock Do not touch the power cord during lightning To avoid electric shock avoid handling the power cord during electrical storms Unplug your TV during a lightning storm or when it will not be used
13. fire or electric shock When your TV will not be used for an extended period of time unplug the power cord To reduce risk of electric shock do not touch the connector with wet hands Insert batteries in accordance with instructions Incorrect polarities may cause the batteries to leak which can damage the remote control or injure the operator Do not expose batteries to excessive heat such as sunshine fire or the like If any of the following occurs contact the dealer The power cord fails or frays Liquid sprays or any object drops into your TV Your TV is exposed to rain or other moisture Your TV is dropped or damaged in any way he performance of your TV changes substantially This apparatus shall not be exposed to dripping or splashing and no objects fill with liquids such as vases shall be placed on the apparatus The mains plug or appliance coupler is used as the disconnect device the disconnect device shall remain readily operable CAUTION These servicing instructions are for use by qualified service personnel only To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated DANGEROUS VOLTAGE within the product s enclosure that may be of sufficient magnitude to constitute a
14. remote to highlight the Wide icon and press OK The Wide menu is displayed 3 Use the Left Right Arrow buttons on the remote to highlight the screen mode you want to display then press OK e Normal preserves the content s original aspect ratio Since the 4 3 aspect ratio is not large enough to fill the TV s screen black bars are added to the left and right of the display image e Wide stretches a 4 3 aspect ratio picture to the edges of the screen Since the picture is being stretched the display image may appear distorted If the program is already formatted for widescreen viewing 1 85 1 or 2 35 1 then black bars will appear on the top and bottom of the display image e Zoom expands images with black bars to fit the screen e Panoramic expands the display image to fill the screen Images may appear wider than intended If you are watching widescreen 1 85 1 or 2 35 1 content black bars will still appear on the top and bottom of the display image This option is only available when the TV is displaying a 4801 480 source e Stretch expands the display image to fill the screen Images may appear wider than intended If you are watching widescreen 1 85 1 or 2 35 1 content black bars will still appear on the top and bottom of the display image This option is only available when the TV is displaying a 720p 1080i 1080p source button on the remote 19 You can also quickly access the Wide menu by pressing the WI
15. residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures 1 Reorient or relocate the receiving antenna 2 Increase the separation between the equipment and receiver 3 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected 4 Consult the dealer or an experienced radio TV technician for help This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Notice 1 The changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment 2 Shielded interface cables and AC power cord if any must be used in order to comply with the emission limits 3 The manufacturer is not responsible for any radio or TV interf
16. television broadcasting was complete on June 12 2009 Analog only television sets that receive TV programming through an antenna now need a converter box to continue to receive over the air TV Watch your local stations to find out when they will turn off their analog signal and switch to digital only broadcasting Analog only TVs should continue to work as before to receive low power Class A or translator television stations and with cable and satellite TV services gaming consoles VCRs DVD players and similar products For additional information please contact the parties listed below as appropriate FCC US Federal Communications Commission Web www fcc gov Phone 1 888 CALL FCC 1 888 225 5322 TTY 1 888 TELL FCC 1 888 835 5322 Fax 1 866 418 0232 E mail fccinfo fcc gov NTIA National Telecommunications and Information Administration Web www ntia doc gov Phone 1 888 DTV 2009 1 888 388 2009 List of US Television Stations www high techproductions com usTVstations htm Your TV comes with a built in tuner capable of processing digital broadcasts No extra converter box is needed Table of Contents Installing the IN 1 Changing the On Screen Menu Language 15 Inspecting the Package Contents enne 1 sel the TV S Date ang TIRO eae 16 JEE TV osse EUR AUN EMO 1 setting the Time Zone 16 installing the TV tee 1 Adjusting the Time for Daylight Savings ENEE 16 Insta
17. DE 19 2 N A CO Screen Aspect Ratio Table E Be 20 E322MV setting Up Closed Captioning Changing the Appearance of Digital Closed Captions Digital closed captions can be displayed according to your preference Your TV can display closed captions for programs that include them Closed captions display a transcription of a program s dialogue To change the appearance of digital closed captions 1 From the Closed Caption menu use T If the program you are viewing is not being broadcast with closed the Arrow buttons to highlight Digital VIZIO captions the TV will not display them CC Style 4 Digital CC Style Caption style As Broadcast gt To activate or deactivate closed captions 2 Use the Left Right Arrow buttons on the remote to select Custom then _ Text Size As Broadcast _ 1 Press the MENU button on the remote press OK The Digital CC Style menu _ Color As Broadcast The on screen menu is displayed VIZIO A appears Opacity 4 Closed Caption 2 Usethe Arrow buttons on the remote Use the Up Down Arrow buttons on BG color As Broadcast to highlight the CC icon and press OK Analog Closed Caption the remote to highlight the setting you BG Opacity As Broadcast The Closed Caption menu is displayed Digital Closed Caption wish to change then use the Arrow teste Digital CC Style buttons to change the setting Window
18. HE PROPERTY OF THEIR RESPEC TINE OWNERS SUBJECT TO CHANGE LESEN NOTICE x NS NUN BX SN NW Aix LJ d WK hw T d A e k ON eke A Beie SN NI A i NN wg el KA NN ES SS ue Sg E NN A SX EON N A T E S die NS ch AN SCH N NS See NC NE BN E NN WAN Su d MN EN S S M e CX AEN ah E d ON N ADS DN 1 we ad ME i g ah wA NS CAR NS s a WW A SA d Y ye Y CAN SS We vw US k NN d A A NN ka lt n NI 3 E Lo NL era d 1 NEN A 3 A H vr A NA Se m LI bw e a AAA SK h WA KS k Ai D AN H 1 a 4 LI ho cR ESTAS ab oe NUN NX sn Aw e SES _ ER h NS da ERS he TX NM WA Oa cx M PCS AA amp Ww r Ae
19. Opacity As Broadcast 3 Use the Arrow buttons on the remote e Caption Style Choose a custom to highlight the type of closed captions you wish to see e Analog Closed Caption for preset caption style e Text Size Adjust the size of the text Select either as Broadcast Captioning or Custom to change size color etc analog NTSC TV channels e Digital Closed Caption for digital ATSC TV channels e Color Change the color of the text e Opacity Change the transparency of the text 4 After highlighting the type of closed captions you wish to see use the Arrow buttons on the remote to select the caption channel you wish to display then press OK Select Analog Closed Caption modes e BG Color Change the background color e BG Opacity Change the transparency of the background gp e Window Color Change the edge x Caption channels usually display different languages For example color ZA A CC1 may display English captions and CC2 may display Spanish captions e Window Opacity Change the edge type e Reset Default Restore closed caption settings to factory defaults 4 When you are satisfied with the appearance of the closed captions press the EXIT button on the remote 21 Adjusting the Picture Settings Using the Picture menu you can adjust the following settings VIZIO e Enable or disable the ambient light sensor Ambient Light Sensor On e Change t
20. Screen Menu 4 Use the Arrow buttons to highlight ke Tuner Mode Digital MTS English To open the on screen menu press the OK or MENU button on the remote 5 Usethe Arrow buttons to change the Use the Arrow buttons to highlight a menu setting to Cable or Antenna option and press the OK button to select that option 6 Press EXIT 11 E322MV Scanning for Channels Scanning for New or Additional Channels Before the TV can detect and display channels and their associated information When a new channel becomes available in your area you do not have to rescan you must scan for channels A channel scan may also be necessary when the all channels to add the new channel Using the add channel feature you can TV has been moved to an area where different free to air broadcast television restrict the scan to new channels only channels are available This is useful because your master channel list settings are preserved To scan for channels To scan for new channels 1 Press the MENU button on the remote The on screen menu is displayed VIZIO 1 Press the MENU button on the remote 7 Hiner Settings The on screen menu is displayed VIZIO 2 Use the Arrow buttons on the remote d Tuner Settings to highlight the TV icon and press OK Tuner Mode Anatenna 2 Usethe Arrow buttons on the remote E Mod Geen The TV Settings menu is displayed Auto Channel Scan to highlight the TV icon and press OK nerd anne The TV Sett
21. Settings icon and 4 PC Settings press OK The TV Settings menu is displayed 2 Usethe Arrow buttons on the remote EAM to highlight the TV icon and press OK Auto Sync Use the Arrow buttons on the remote to highlight Parental Controls and The TV Settings menu is displayed Horiz Position press OK 3 Use the Arrow buttons to highlight PC _ Vertical Position 220 4 Enter your parental passcode If you have not set a passcode choose a Settings and press OK Fine Tune 4 digit passcode and enter it using the keypad on the remote The Parental Controls menu is displayed 4 Usethe Arrow and OK buttons to adjust each of the following options change your parental passcode see Changing the Parental Control Passcode on page 15 Horiz Position Adjust the horizontal left right position of the picture Vertical Position Adjust the vertical up down position of the picture Press OK to find the settings for the current input signal Fine Tune Adjust the synchronization between the PC and the TV Increase or decrease this setting if you see waviness or a blurry picture Fi wh If you would like the TV to automatically adjust the picture for best Os quality select Auto Sync and press OK 13 Enabling or Disabling Program Ratings To manage program content according to its rating you must enable the Program Rating feature To enable or disable the Program Rating fe
22. ail the enclosed registration card Extended Warranties For peace of mind and to protect your investment beyond the standard warranty VIZIO offers on site extended warranty service plans These plans provide additional coverage during the standard warranty period To purchase an extended warranty service plan visit www VIZIO com When Reading this Manual When you see this symbol please read the accompanying important warning or notice It is intended to alert you to the presence of important operating instructions Xz When you see this symbol please read the accompanying helpful tip My Product Information Enter your product information here for easy reference Model Number Serial Number Date of Purchase VIZIO recommends you attach your sales receipt to this manual for safekeeping Attach Sales Receipt Here Important Safety Instructions Your DIV is designed and manufactured to operate within defined design limits Misuse may result in electric shock or fire To prevent your TV from being damaged the following instructions should be observed for the installation use and maintenance of your TV Read the following safety instructions before operating your TV Keep these instructions in a safe place for future reference To reduce the risk of electric shock or component damage switch off the power before connecting other components to your TV Read these instructions Keep these instructions Heed
23. all warnings Follow all instructions Do not use this apparatus near water Clean only with a dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as when the power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus ha
24. and neck you may have it facing backwards Package Contents 3 Turn the attached thumbscrew until it is completely tightened Fold down the thumbscrew tab so it is flat against the bottom of the base Move the TV with attached stand into an upright position and place on a flat level and stable surface To ensure proper ventilation leave at least 1 of space between the back of the TV and any other objects walls etc E322MV Installing the TV on a Wall To mount your TV on a wall you will need a wall mount Consult the information below to find the appropriate mount for your TV model E322MV Screw Size 6 ocrew Length 10mm Screw Pitch 1mm Hole Pattern 200mm x 200mm Installing a TV on a wall requires lifting To prevent injury or damage to the TV ask someone to help you Be sure the mount you choose is capable of supporting the weight of the TV After you have determined that you have the correct mount for your TV you can begin the installation To install your TV on a wall 1 Disconnect any cables connected to your TV Place the TV face down on a clean flat stable surface Be sure the surface is clear of debris that can scratch or damage the TV 2 urn the attached thumbscrew until it is completely loosened E322MV 3 Gently remove the stand neck 4 Attach your TV and wall mount to the wall carefully following the instructions that came with your mo
25. are only pressing one button at a time e Point the remote directly at the TV when pressing a button e Replace the remote batteries with new ones See Replacing the Batteries on page 7 The image quality is not good e For the best image quality view high definition programs using digital sources Connect your devices with HDMI cables e f you are using an antenna the signal strength of the channel may be low Ensure your antenna is connected securely to the TV and move the antenna around the room or close to a window for the best signal E321MV The picture is distorted When I change input source the display image changes size e Nearby electrical devices may be interfering with the TV Separate the e he TV remembers the viewing mode on each input source If the TV from electrical appliances cars or flourescent lights viewing mode on the new input source differs from the one on the e Ensure all cables are securely attached input source you switch from the difference may be noticable e See Setting the Screen Aspect Ratio on page 19 The display image does not cover the entire screen e f you are in RGB mode computer ensure that H Size and V Position in the on screen menu are set correctly e f you are using TV AV1 AV2 or Component with 480i input press the WIDE button on the remote to change the screen mode The TV has pixels dots that are always dark or always lit e Your HDTV is precision manufactured using
26. ature 1 From the Parental Controls menu highlight Rating Enable and press OK The Rating Enable menu is displayed 2 Select On or Off and press OK Locking and Unlocking Channels When a channel is locked it will be inaccessible Locking a channel is a good way to prevent children from viewing inappropriate material To lock or unlock a channel 1 From the Parental Controls menu highlight Channel Locks and press OK The Channel Locks menu is displayed 2 Highlight the channel you want to lock or unlock and press OK 3 Whena channel is locked the Lock icon appears locked The channel is not accessible unless the parental passcode is entered 4 When a channel is unlocked the Lock icon appears unlocked The channel is accessible 14 E322MV Blocking and Unblocking Content by Rating A channel may sometimes broadcast programs that are meant for children and at other times broadcast programs that are meant for mature audiences You may not want to block the channel completely using a channel lock but you may wish to block certain programs from being viewed When this is the case you can use the TV s Rating Block feature to block content based on its rating A 20 For a list of content ratings and their definitions visit u gt v www tvguidelines org To block or unblock content by its rating 1 From the Parental Controls menu highlight the content type you want to adjust and pres
27. buttons to change the setting to Enable or Disable Press EXIT E322MV Setting the Date and Time Turning the VIZIO Light On or Off Using this menu option you can manually set the TV s date and time This setting allows you to turn off the back lit VIZIO logo on the front bezel of your To manually set the date and time TV 1 Press the MENU button on the remote The on screen menu is displayed To turn the VIZIO Light on or off 2 Usethe Arrow buttons on the remote to highlight the TV icon and press 1 Press the MENU button on the remote The on screen menu is displayed OK The TV Settings menu is displayed 2 Usethe Arrow buttons on the remote to highlight the TV icon and press 3 Usethe Arrow buttons to highlight Time amp Local Settings and press OK OK The TV Settings menu is displayed 4 Usethe Arrow buttons to highlight Date amp Time 3 Usethe Arrow buttons to highlight VIZIO Logo and press OK Use the Arrow buttons to highlight individual numbers in the date and time 4 Use the Left Right Arrow buttons to select On or Off Use the Number Pad to enter the current date and time e When set to Off the VIZIO logo will briefly light up when the TV is 6 Press EXIT turned on It will remain off while the TV is on e When set to On the VIZIO logo will stay lit while the TV is on 17 Using the Other Menu Settings Your TV features an easy to use on screen menu Using this menu you can Changing the Input Sou
28. e first time setup e Your TV should be installed and the power cord should be connected to an electrical outlet e Have your remote ready Ensure the batteries are inserted e Your devices should be connected To complete the first time setup 1 10 Turn the TV by pressing the Power Standby button on the remote Welcome Initial Setup Allow the VIZIO setup Wizard to help you tune your channels The Setup App is displayed Press the Right Arrow button on the remote to go to the next screen Use the Up Down Arrow buttons on the remote to highlight your preferred T language then press Right Arrow Espano Fran ais Language Use the Up Down Arrow buttons on the remote to highlight Home and Please select your input location Home press Right Arrow Retail Initial Setup Mode Setting 4 Completing the First Time Setup If the TV is connected to an external antenna select Antenna then press Right Arrow and go to step 5 Initial Setup Please select your input source If the TV is connected to a cable service without a set top box cable is connected directly from the wall outlet select Cable then press Right Arrow and go to step 5 If the TV is connected to a cable or satellite set top box press the EXIT button on the remote then select the input to which your set top box is connected HDMI COMP or AY Use the Up Down Arrow buttons on the remote to highlight Scan th
29. en press Right Arrow Initial Setup Channel Scan Please connect your cable or Scan antenna to the DTV TV input Skip Scan The TV begins a channel scan Wait for the channel scan to finish When the channel scan is complete the Congratulations screen is displayed The first time setup is complete Adjusting the TV Settings From the TV Settings Menu you can setting Up Channels VIZIO e Adjust the tuner settings 4 TV Settings From the tuner settings menu you can e Adjust the TV settings for use with a PC Tuner Settings PC Settings Parental Controls e Change the signal source e Set up the parental controls e Scan for new additional channels e Change the on screen menu e Start anew channel scan Menu Language anguage e Remove channels from the master list Time amp Local Settings VIZIO Logo Changing the Tuner Mode Using this option you can change the signal source for the coaxial TV input e Change the TV s date and time e Turn the VIZIO light on or off To change the signal source 1 Press the MENU button on the remote The on screen menu is displayed VIZIO 4 Tuner Settings 2 Use the Arrow buttons on the remote to highlight the TV icon and press OK _ Tuner Mode Anatenna The TV Settings menu is displayed Auto Channel Scan 3 Use the Arrow buttons to highlight SEH Sch or Tuner Settings and press OK Skip Channel igati Analog MTS St Navigating the On
30. ence Statement 34 Viewing a USB Photo Slideshow bk 28 NOTO REP 34 Customizing the Photo Display Screen sass 28 mE ge ele EE 34 Viewing System Info and Resetting to Factory 29 5 lge NETT TTE Displaying System Information sees 29 ui Open Source Software Notice sss 34 Restoring the TV to the Factory Default Settingss 29 Restarting the Setup 2 29 Troubleshooting amp Technical Support 30 The TV displays No Signal assassins 30 There 16 NO OW EE 30 The power is on but there is no image ontheecreen 30 There is NO SOUNd E 30 The colors on the TV don t look right sss 30 The buttons on the remote aren t workimg sss 30 The image quality iS NOT GOO E 30 WRG OIG WU iS distorted eeen 31 The display image does not cover the entire screen 31 The TV has pixels dots that are always dark or always lit 31 see noise or static the SCreen 31 When I change input source the volume 31 When change input source the display image changes size
31. ent however it will not produce detail that does not otherwise exist Adjusting the Noise Reduction Setting E322MV Noise reduction diminishes artifacts such as blockiness or pixellation When activated the resulting picture usually has softer edges To adjust the noise reduction setting 1 Press the OK button on the remote The on screen menu is displayed Use the Arrow buttons to highlight Picture and press OK Use the Arrow buttons to highlight Noise Reduction and press OK Use the Arrow buttons to highlight Off Low Medium or High then press OK Press EXIT VIZIO _ lt Noise Reduction Off Low Medium High Adjusting the Color Temperature Color temperature changes the warmness or coolness of the white areas of the picture N To adjust this setting Picture Mode must be set to Custom To adjust the color temperature setting 1 Press the OK button on the remote The on screen menu is displayed Use the Arrow buttons to highlight Picture and press OK Use the Arrow buttons to highlight More and press OK Use the Arrow buttons to highlight Color Temperature and select Normal Cool Warm or Custom If you choose Custom you can change the individual Red Blue and Green gain settings When you are finished press EXIT Green Gain VIZIO 4 Color Temperature Color Temperature Custom A Red Gain IN AER 128 Blue
32. erence caused by unauthorized modification to this equipment It is the responsibilities of the user to correct such interference FCC warning Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user s authority to operate this equipment 34 Caution Always use an AC DC power adapter that is properly grounded Use the AC cords listed below for each area USA UL Canada CSA Germany VDE UK BASE BS Japan Electric Appliance Control Act Open Source Software Notice Your VIA device may contain GPL executables and LGPL libraries that are subject to the PL2 0 LGPL2 1 License Agreements VIZIO offers to provide source code to you on CD ROM for a processing fee covering the cost of performing such distribution such as the cost of media shipping and handling upon request made to VIZIO at www VIZIO com This offer is valid for a period of three 3 years from the date of the distribution of this VIA device by VIZIO You can obtain a copy of the GPL LGPL licenses from http www gnu org licenses old licenses gpl 2 0 html and http www gnu org licenses oldlicenses Igpl 2 1 html You can also obtain a copy of gSOAP public license from http www cs fsu edu engelen license html Please visit www VIZIO com for attribution of copyrights to any open source software on your VIZIO VIA device Permission is hereby granted free of charge to any person obtaini
33. for long period of time This will protect your TV from damage due to power surges Do not attempt to repair or service your TV yourself Opening or removing the back cover may expose you to high voltages electric shock and other hazards If repair is required contact your dealer and refer all servicing to qualified service personnel WARNING Keep your TV away from moisture Do not expose your TV to rain or moisture If water penetrates into your TV unplug the power cord and contact your dealer Continuous use in this case may result in fire or electric shock Do not use your TV if any abnormality occurs If any smoke or odor becomes apparent unplug the power cord and contact your dealer immediately Do not try to repair your TV yourself Avoid using dropped or damaged appliances If your TV is dropped and the housing is damaged the internal components may function abnormally Unplug the power cord immediately and contact your dealer for repair Continued use of your TV may cause fire or electric shock Do not install your TV in an area with heavy dust or high humidity Operating your TV in environments with heavy dust or high humidity may cause fire or electric shock Follow instructions for moving your TV Ensure that the power cord and any other cables are unplugged before moving your TV When unplugging your TV hold the AC DC power adapter not the cord Pulling on the power cord may damage the wires inside the cord and cause
34. he picture mode Picture Mode Standard e Adjust noise reduction Backlight 90 Brightness E 50 Contrast E 50 Color 50 Tint e Adjust color temperature e Enable or disable color enhancement e Enable or disable adaptive luma e Enable or disable DCR Dynamic Contrast Ratio Sharpness Noise Reduction e Reset the picture mode settings Enabling or Disabling the Ambient Light Sensor When enabled the ambient light sensor detects the light levels in the room to optimize the brightness of the TV s backlight When the ambient light sensor is enabled you will be unable to manually change the TV s backlight settings To enable or disable the ambient light sensor 1 Press the OK button on the remote The on screen menu is displayed 2 Use the Arrow buttons to highlight Picture and press OK 3 Use the Arrow buttons to highlight Ambient Light Sensor 4 Use the Left Right Arrow buttons to change the setting to Off or On 5 Press EXIT 22 E322MV Changing the Picture Mode Your TV display can be adjusted to suit your preferences and viewing conditions To change the picture mode 1 Press the OK button on the remote The on screen menu is displayed 2 Use the Arrow buttons to highlight Picture and press OK 3 Use the Arrow buttons to highlight Picture Mode and press OK 4 Use the Arrow buttons to highlight one of the following options then press OK e Standard Sets the various picture setting
35. ings menu is displayed Auto Channel Scan lt Additional Scan S off Skip Channel Skip Channel 3 Use the Arrow buttons to highlight Analog MTS Stereo Tuner Settings and press OK 3 Use the Arrow buttons to highlight Tuner Settings and press OK 4 Use the Arrow buttons to highlight wm Auto Channel Scan and press OK Digital MTS English 4 Use the Arrow buttons to highlight Additional Scan Analog MIS s Digital MTS English 5 Usethe Arrow buttons to highlight On and press OK 5 Usethe Left Right Arrow buttons to change the option to On or Off TOE PRENNE 6 Perform scan 6 Wait for the channel scan to reach Scan for available channels 100 then press EXIT Only new channels are added to the channel map 12 E322MV Adjusting the TV Settings for Use with A PC setting the Parental Controls Your TV can be used to display output from a home computer using the RGB port The TV s parental controls allow you to prevent the TV from displaying certain channels or programs without a password These settings are only available when viewing content from the HGB port Accessing the Parental Controls Menu To access the Parental Controls menu To adjust the PC settings 1 Press the MENU button on the remote The on screen menu is displayed 1 Press the MENU button on the remote The on screen menu is displayed VIZIO 2 Use the Arrow buttons on the remote to highlight the
36. lling the TV a RE 2 Enabling or Disabling Automatic Date and Time Updates 16 Setting the Date and Time EE 17 Controls and Connections sssssssssesesessssesenss 4 Turning the VIZIO Light On or Op 17 Rear li NS eege 4 Right Side Panel 5 Using the Other Menu Settings se 18 Mm 5 Navigating the On Screen Menu ENEE 18 6 Changing the Input Source ENEE 18 Replacing the oed 7 Customizing Input Names eene ee 19 Setting the Screen Aspect Hato nennen 19 Connecting W IT Screen Aspect Ratio DE e 20 Before You E 8 Setting Up Closed Captioning cccseccsscssscssessesssecsecssecsesssesssessecssecseesseeee 21 Connecting Your Re 8 Changing the Appearance of Digital Closed 21 Completing the First Time Setup uuu 10 Adjusting the Picture Gettmnges nennen 22 Enabling or Disabling the Ambient Light Sensor 22 Adjusting the TV oettings 11 Changing the Picture Mode aiat 22 Navigating the On Screen nnn nnns 11 Adjusting the Noise Reduction Setting 23 SENG Up MANS NET DR 11 Adjusting the Color Temperature 93 Changing the Tuner Mode 11 Enabling or Disabling Color Enhancement eene 24 Scanning Ter eau E 12 E
37. mproper operation improper voltage supply or power surges signal issues damages from shipping acts of God any type of customer misuse modifications or adjustments as well as installation and set up issues or any repairs attempted by anyone other than by a VIZIO authorized service center Products with unreadable or removed serial numbers or requiring routine maintenance are not covered This one year limited warranty does not cover Products sold AS IS FACTORY RECERTIFIED or by a non authorized reseller THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE ANY IMPLIED WARRANTIES INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE VIZIO S TOTAL LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING VIZIO S NEGLIGENCE ALLEGED DAMAGE OR DEFECTIVE GOODS WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT VIZIO SHALL NOT BE RESPONSIBLE FOR LOSS OF USE LOSS OF INFORMATION OR DATA COMMERCIAL LOSS LOST REVENUE OR LOST PROFITS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND
38. nabling or Disabling Adaptive 24 Scanning for New or Additional Channels 12 Enabling or Disabling DCR Dynamic Contrast Ratio 24 Adjusting the TV Settings for Use with A PC cr nare rae 13 Resetting the Picture Settings 24 Setting the Parental Controls E 13 Adjusting the Audio Settlnge ne 25 Accessing the Parental Controls Men 13 Enabling or Disabling SRS TruSurround HD 25 Enabling or Disabling Program 14 Enabling or Disabling SRS TruVolume ees 25 Locking and Unlocking Channels eee t4 Adjusting the Equalizer 25 Blocking and Unblocking Content by 14 Adjusting Bass and Treble LevelS sass 26 Changing the Parental Control 15 Adjusting the Speaker Balance 26 Resetting the Content LOCKS ae NEE 15 Enabling or Disabling the Built In Speakers EEN 26 E322MV Selecting the Digital Output Mode 26 Zero Bright Pixel Defect 33 Resetting the Audio SettngS uk 27 Legal amp Compliance ERE 34 Setting the Sleep Wu E 27 9 FCC Class B Radio Interfer
39. ng a copy of any such software and associated documentation files the Open Source Software to deal in the Open Source Software without restriction including without limitation the rights to use copy modify merge publish distribute sublicense and or sell copies of the Open Source Software and to permit persons to whom the Open Source Software is furnished to do so subject to the following conditions THE SOFTWARE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF ERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE AND NONIN FRINGEMENT INNO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM DAMAGES OR OTHER LIABILITY WHETHER IN AN ACTION OF CONTRACT TORT OR OTHERWISE ARISING FROM OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE Za x i V x NS tr Soy Geh ds M M N CW Kr NS Re WS S 5 S NS e d ENS AN ERI BIEN EEN Ww ANA DENN NS d SE KA ie Se NUR SS EANA KEE EE EN S EA EE SN AN SS a CR 2011 ALL RIGHTS RESERVED THE V VIZIO VIZIO INTERNET A PS TH ATER 3D FULL ARRAY TRULED EDGE LIT RAZOR LED 240HZ SPS 480HZ SPS de 3 N ER SOA E Ve YS ENTERTAINMENT FREEDOM AND ENTERTAINMENT FREEDOM FOR ALL NAMES LOGOS AND PHRASE ARE REGISTERED OR UNREGISTERED TRADEMARKS CUNS S ae p MP SOUS NC NON SOF wae INC RINER LOGOS AND EEN ARE T
40. nnected Your TV features the ability to customize the names of these inputs to make them easy to remember Custom names have a 10 character limit For example HDMI 1 could be renamed as My Blu ray You can also remove unused inputs from the input list making selection of the correct input faster To customize an input name d Press the MENU button on the remote The on screen menu is displayed Use the Arrow buttons on the remote to highlight the Input icon and press OK The Input menu is displayed Use the Arrow buttons to highlight Name Input and press OK Use the Arrow buttons on the remote to highlight the input source you wish to rename then press OK Use the Arrow buttons to highlight Custom Label and press OK The on screen keyboard is displayed Use the Arrow and OK buttons to spell the custom input name When you are finished highlight OK and press OK Press EXIT VIZIO Name Input _ Custom Label Reset setting the Screen Aspect Ratio The TV can display images in five different modes Normal Wide Zoom Panoramic and Stretch Each mode changes the picture according to the content s original format Use the table on the next page to determine the best aspect ratio for your content type Areas in red will not be visible on your TV screen To adjust the screen aspect ratio 1 Press the OK button on the remote The on screen menu is displayed 2 Use the Arrow buttons on the
41. o ports 3 Turn the TV on by pressing the Power Standby button on the remote available 4 Turn your device on 5 When you are ready to use your newly connected device press the INPUT button on the remote and select the connection type HDMI RGB etc from the on screen menu Press OK 6 Check the list of devices connection types below for special instructions e Cable TV without cable box directly from wall Perform a channel scan See Scanning for Channels on page 12 000 e RGB Component RF Antenna Make sure the desktop resolution on the PC is set to 1920 x 1080 Set the Screen Mode to Normal e DVD Player with DVI o Connect left white and right red audio cables to the L and R ports next to the HDMI ports on the TV Composite AV Required Device Ports 2 Ensure the TV has a matching port available 3 Ensure you have a cable that matches the available port For example if you are connecting a Blu ray player with an HDMI port be sure you have an HDMI cable E322MV Select one of the connection types Use the cable s shown to connect the TV to your device Select DIGITAL RF 77 DIGITAL COAXIAL 7 s ANALOG ANALOG BETTER COMPONENT rer d gt ANALOG COMPOSITE AV ANALOG Device Connection Chart The first time you turn on the TV the Setup App will guide you through each of the steps necessary to get your TV ready for use Before you begin th
42. ode must be set to Custom To enable or disable the DCR setting 1 2 3 4 5 6 Press the OK button on the remote The on screen menu is displayed Use the Arrow buttons to highlight Picture and press OK Use the Arrow buttons to highlight More and press OK Use the Arrow buttons to highlight DCR Use the Left Right Arrow buttons to change the setting to Off or On Press EXIT Resetting the Picture Settings To restore the TV s picture settings to the factory defaults 1 Press the OK button on the remote The on screen menu is displayed Are you sure you want to RESET Picture Settings to the factory defaults Use the Arrow buttons to highlight Picture and press OK OK Use the Arrow buttons to highlight Reset Picture Mode then press OK Use the Arrow buttons to highlight OK and press OK Press EXIT E322MV Adjusting the Audio Settings Using the Audio Settings menu you can adjust the following e Enable or disable SRS TruSurround HD VIZIO e Enable or disable SRS TruVolume NN _ SRS TruSurround HD 4 Off SRS TruVolume Off e Adjust the equalizer settings e Adjust bass and treble levels Equalizer Settings e Adjust speaker balance Balance e Enable or disable the built in speakers _ TV Speakers Optical Audio Out e Select the digital audio output Reset Audio Mode mode e Reset the audio settings Turn SRS TruSurround HD On or Off Enabling or
43. rce e Change the input source and rename inputs External devices such as DVD players Blu Ray Players and video game consoles Set the screen aspect ratio can be connected to your TV To use one of these devices with your TV you must first change the input source in the on screen menu e Set up closed captions e Adjust the picture settings To change the input device 1 Press the MENU button on the remote The on screen menu is displayed VIZIO _ 4 Input Source TV e Adjust the audio settings e Set the sleep timer 2 Use the Arrow buttons on the remote Picture to highlight the Input icon and press OK The Input menu is displayed AV e View a USB photo slideshow e Get system info or reset to factory defaults e 3 Use the Arrow buttons to highlight Input Source and press OK Sleep i Phot Timer See 4 Use the Arrow buttons on the remote Menu to adjust TV controls to highlight the input source you wish to display then press OK 5 Press EXIT Navigating the On Screen Menu To open the on screen menu press the OK button on the remote Use the Arrow buttons to highlight a menu option and press the OK button to select that option 37 You can also quickly access the Input menu by pressing the INPUT 205 button on the remote 18 E322MV Customizing Input Names When you have multiple devices connected to your TV it can become difficult to remember the inputs to which they are co
44. rday and Sunday Pacific Time or visit www VIZIO com PRE AUTHORIZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER Proof of purchase in the form of a purchase receipt or copy thereof is required to show that a Product is within the warranty period Parts and Labor There will be no charge for parts or labor during the warranty period Replacement parts and Products may be new or recertified at VIZIO s option and sole discretion Replacement parts and Products are warranted for the remaining portion of the original warranty or for ninety 90 days from warranty service or replacement whichever is greater Type of Service Defective Products must be sent to a VIZIO service center to obtain warranty service VIZIO is not responsible for transportation costs to the service center but VIZIO will cover return shipping to the customer PRE AUTHORIZATION IS REQUIRED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER FOR WARRANTY SERVICE Product returns to VIZIO s service centers must utilize either the original carton box and shipping material or packaging that affords an equal degree of protection VIZIO Technical Support will provide instructions for packing and shipping the covered Product to the VIZIO service center Limitations and Exclusions VIZIO s one year limited warranty only covers defects in materials and workmanship This warranty does not cover for example cosmetic damage normal wear and tear i
45. right speaker increase the balance setting e To increase the loudness of the left speaker decrease the balance setting 26 E322MV Enabling or Disabling the Built In Speakers Using this menu option you can turn the built in speakers on or off This is often used when the TV is connected to a home audio system To enable or disable the built in speakers esch Press the OK button on the remote The on screen menu is displayed Use the Arrow buttons to highlight Audio and press OK Use the Arrow buttons to highlight TV Speakers and press OK gt w Zo Press the Right Left Arrow buttons to select On or Off and press EXIT Selecting the Digital Output Mode Using this menu option you can force the TV to downsample unsupported audio formats to PCM audio You may want to use this option if you have an older audio receiver connected to the TV If you are unfamiliar with audio formats or your TV is not connected to an audio receiver VIZIO recommends you set this option to Auto This option only affects audio output from the optical port To select the digital output mode Press the OK button on the remote The on screen menu is displayed 2 Usethe Arrow buttons to highlight Audio and press OK Use the Arrow buttons to highlight Optical Audio Out and press OK 4 Usethe Arrow buttons to highlight Auto or Force PCM and press OK 5 Press EXIT E322MV Resetting the Audio Settngs To rese
46. risk of electrical shock to persons Television Antenna Connection Protection If an outside antenna satellite dish or cable system is to be connected to the TV make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges Article 810 of the National Electrical Code ANSI NFPSA 70 provides information with regard to proper grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of the grounding conductors location of antenna discharge unit connection to grounding electrodes and requirements of the grounding electrode Lightning Protection For added protection of the TV during a lightning storm or when it is left unattended or unused for long periods of time unplug the TV from the wall outlet and disconnect the antenna or cable system Power Lines Do not locate the antenna near overhead light or power circuits or where it could fall into such power lines or circuits Remember the screen of the coaxial cable is intended to be connected to earth in the building installation Ground Clamp Antenna Lead In Wire N Antenna Discharge Unit _ NEC Section 810 20 Grounding Conductors NEC Section 810 21 Ground Clamps wre Power Service Grounding Electrode System NEC ART 250 part H Electric Service Equipment E322MV DTV Transition Advisory The nationwide switch to digital
47. s OK USA TV USA television program broadcasts USA Movie USA movie broadcasts CAN English Canadian English television program broadcasts CAN French Canadian French television program broadcasts 2 Foreach rating type you want to block or unblock use the Up Down and Left Right Arrow buttons on the remote to highlight the rating type and press OK 3 When the rating type is blocked the Lock icon appears locked Content with this rating cannot be viewed 4 When the rating type is unblocked the Lock icon appears unlocked Content with this rating can be viewed 5 If you want to block all unrated content highlight Block Unrated Shows and use the Arrow buttons on the remote to select On 6 When you are finished adjusting the rating level blocks press the EXIT button on the remote E322MV Changing the Parental Control Passcode If you use the parental controls you should change the passcode to prevent children from accessing inappropriate material 1 From the Parental Controls menu highlight Change PIN and press OK The Change PIN menu is displayed 2 n the New Pin field use the Number Pad on the remote to enter your new 4 digit parental control passcode In the Confirm Pin field use the Number Pad on the remote re enter your new 4 digit parental control passcode 4 Write down your new parental control passcode and save it in a secure location 5 Press the EXIT button on the remote
48. s been exposed E322MV to rain or moisture does not operate normally or has been dropped Unplug the power cord before cleaning your TV When moving your TV from an area of low temperature to an area of high temperature condensation may form in the housing Wait before turning on your TV to avoid causing fire electric shock or component damage A distance of at least three feet should be maintained between your TV and any heat source such as a radiator heater oven amplifier etc Do not install your TV close to smoke Operating your TV close to smoke or moisture may cause fire or electric shock Slots and openings in the back and bottom of the cabinet are provided for ventilation To ensure reliable operation of your TV and to protect it from overheating be sure these openings are not blocked or covered Do not place your TV in a bookcase or cabinet unless proper ventilation is provided Never push any object into the slots and openings on your TV cabinet Do not place any objects on the top of your TV Doing so could short circuit parts causing a fire or electric shock Never spill liquids on your TV Your TV should be operated only from the type of power source indicated on the label If you are not sure of the type of power supplied to your home consult your dealer or local power company Do not apply pressure or throw objects at your TV This may compromise the integrity of the display The manufacturer s warranty does not
49. s to values that will produce the best picture in the most cases This is the recommended setting e Movie Sets the picture settings to values perfect for watching a movie in a dark room e Game Optimizes the picture settings for displaying game console output e Vivid Sets the picture settings to values that produce a brighter more vivid picture e Custom Allows you to manually change each of the picture settings Backlight Adjusts the LED brightness to affect the overall brilliance of the picture This option is not available unless Ambient Light Sensor is set to Off Brightness Adjusts the black level of the picture When this setting is too low the picture may be too dark to distinguish details When this setting is too high the picture may appear faded or washed out Contrast Adjusts the white level of the picture When this setting is too high the picture may appear dark When this setting is too low the picture may appear faded or washed out If the setting is too high or too low detail may be difficult to distinguish in dark or bright areas of the picture Color Adjusts the intensity of the picture colors Tint Adjusts the hue of the picture This setting is useful in adjusting the flesh tones in the picture If flesh appears too orange reduce the level of color before adjusting tint Sharpness Adjusts the edge sharpness of picture elements It can be used to sharpen non HD high definition cont
50. t settings all changes you have made to the settings will be lost To restore the TV to its factory default settings 1 Press the MENU button on the remote The on screen menu is displayed 2 Usethe Arrow buttons on the remote to highlight the Help icon and press OK The Help menu is displayed 3 Highlight System Reset and press OK The TV displays Are you sure you would like to Restore Defaults This will erase any custom settings 4 Highlight Yes and press OK o Press EXIT 29 Troubleshooting amp Technical Support Products are often returned due to a technical problem rather than due to a defect If you are experiencing a problem when using your TV try to fix the issue using this troubleshooting guide If after using this troubleshooting guide you are still experiencing an issue with your TV contact VIZIO s Support Department Quality customer support and service are integral parts of VIZIO s commitment to service excellence Phone 877 698 4946 Web www VIZIO com Fax 949 585 9563 Email techsupport vizio com Hours of operation Monday Friday 6 am to 9 pm PST Saturday Sunday 8 am to 4pm PST The TV displays No Signal e Press the INPUT button on the remote control to select a different input source e f you are using cable TV satellite or antenna connected directly to the TV scan for channels See Scanning for Channels on page 12 There is no power e Ensure the TV is pl
51. t the audio settings to the factory default settings 1 2 3 Press the OK button on the remote The on screen menu is displayed Use the Arrow buttons to highlight Audio and press OK Use the Arrow buttons to highlight Reset Audio Mode and press OK The TV displays Are you sure you want to RESET Audio Settings to the factory defaults Use the Arrow buttons to highlight OK and press OK Press EXIT setting the Sleep Timer When activated the TV s sleep timer will turn the TV off after a set period of time To use the sleep timer 1 4 Press OK then press EXIT Press the MENU button on the remote The on screen menu is displayed VIZIO 4 Sleep Timer Off 30 minutes Use the Arrow buttons on the remote to highlight the Timer icon and press OK The Timer menu is displayed 60 minutes Use the Up Down Arrow buttons on the remote to highlight the period of time after which you want the TV to power off 30 60 90 or 120 minutes 90 minutes 120 minutes 27 E322MV Viewing a USB Photo Slideshow Customizing the Photo Display Screen The Photo menu can be displayed as a list or as a grid of thumbnail images The Your player features a USB port where you can connect and share a USB thumb images can also be sorted by date or by name drive containing your photos To customize the photo display screen The TV supports the following file types 1 From the photo screen use the Arro
52. th number pad to manually enter a digital sub channel For example 18 4 or 18 5 owitch between display modes E322MV Replacing the Batteries 1 Remove the battery cover by pressing gently on the V and pushing the cover away from the remote 2 Insert two AAA batteries Make sure that the and symbols on the batteries match the and symbols inside the battery compartment 3 Replace the battery cover S ge e Use only good quality batteries Inserting the batteries incorrectly may result in cracking or leakage that may cause a fire or result in injury E e Dispose of old or dead batteries in accordance with local hazardous waste regulations e Keep batteries away from children and pets Connecting Your Devices Your HDTV can be easily connected to an external device Connecting Your Devices e DVD or Blu Ray player Once you have determined the best available connection type on both your e Video game console 9 device and the TV ensure you have the corresponding cable e Cable box e External antenna To connect a device to the TV e Or other device 1 Ensure both the TV and your device are off Before You Begin 2 Connect the device and the TV Use the best available connection See the Device Connection Chart on the next page To connect a device to the HDTV Ensure each end of the cable is securely connected 1 Verify that the device has one of the following types of vide
53. u Channel Up Down Change the channel Volume Up Down Increase or decrease the loudness of the TV audio Input Change the input device Press once to display the Input menu Continue pressing the button to highlight a different input source Press Menu to confirm your selection Remote Control Back V Button Volume Up Down Mute Number Pad Wide Power Standby A V Controls Info Menu Arrow Guide Channel Up Down Last Remote Control Power Standby Input A V Controls Info CC Menu Exit Arrow OK Guide Back V Button Channel Up Down Volume Up Down Mute Last Number Pad Dash Wide E322MV Turn the TV on or off Change the input device Control external device CEC enabled devices only Display the Info Window Open the Closed Captioning menu Display the on screen menu Close the on screen menu Navigate the on screen menu and episode guide Select highlighted menu option Display the episode guide digital channels only Go to the previous on screen menu op tions Launch the USB photo viewer Change the channel With each press of the button the channel will increase or decrease by one Increase or decrease the loudness of the TV s audio Turn the sound off or on When mute is activated the TV s audio is turned off Return to the channel last viewed Use the number pad to manually enter a channel Use wi
54. ugged into a working electrical outlet e Ensure the power cable is securely attached to the TV e Press the Power Standby button on the remote or press the Power Standby button on the side of the TV to turn the TV on The power is on but there is no image on the screen e Ensure all cables are securely attached to the TV e Ensure all devices are connected correctly Devices differ see your device s user manual for details e Adjust Brightness Contrast or Backlight See Scanning for Channels on page 12 e Press the INPUT button on the remote to select a different input source 30 There is no sound e Press Volume Up on the remote control e Press the MUTE button on the remote to ensure mute is off e Check the audio settings Ensure the speakers are set to On e Ensure no headphones are connected to the TV e Check the audio connections of external devices Blu ray player game console cable satellite box that are connected to the TV e f you are using an antenna the signal strength of the channel may be low Ensure your antenna is connected securely to the TV and move the antenna around the room or close to a window for the best signal The colors on the TV don t look right e Adust the Color and Tint settings in the Picture menu See Scanning for Channels on page 12 e Reset the picture settings e Check all cables to ensure they are securely attached The buttons on the remote aren t working e Ensure you
55. unt Use only with a UL listed wall mount bracket rated for the weight load of this TV See Appendix A Specifications for the weight of this TV Rear Panel HDMI 1 2 3 HOMI BEST KA RCA Stereo Audio Out AUDIO CUT 1 Composite AUDIO OUT RGB PC AA TV O Le T QW OPTICAL AUDIC RGB AELE ANTENA A Optical Digital RGB PC Audio Out 3 5mm PC Audio In Cable Antenna Rear Panel USB HDMI 1 2 3 RCA Stereo Audio Out Component Composite Cable Antennal RGB PC 3 5mm PC Audio In Optical Digital Audio Out Controls and Connections Connect a USB thumb drive to view photos Connect HDMI devices Connect RCA cable to output audio to another device Connect component or composite device Connect RF Coaxial connector from cable antenna or satellite box Connect RGB cable from computer Use 3 5mm port to connect PC audio Connect 3 5mm cable from PC audio out when using RGB PC port to display PC output Connect SPDIF Optical audio device Soundbar re ceiver etc E322MV Right Side Panel Front Panel Remote Control VIZIO Light Sensor Front Panel Channel Up Remote Control Sensor When using the remote point it directly at this sensor VIZIO Light This light is white when the TV is on Channel Down Volume Up Volume Down Input Right Side Panel Power Turn the TV on or off Menu Display on screen men
56. w buttons on the remote to highlight an VIZIO Media Type File Types yp yP image then press OK The menu is Photo displayed on the left side of the screen Sort by Images 2 Highlight one of the following options Thumbnail Size and press OK Exit Browser e Sort Select to change the display To play USB media you must first Save your images onto a USB thumb drive order of photos Choose Date or Name Remember e File Select to change the method e The USB thumb drive must be formatted as FAT32 of displaying photos Choose List e Files on the USB thumb drive must be a supported file type or Thumbnail e The USB thumb drive must have a minimum 1GB memory e Thumbnail Size Select to change the size of displayed thumbnail e The TV will not play media from external hard drives or mp3 players Kees images Choose Small Medium Choose how you want your photos To play your USB media or Large organized 5 Load your photos onto a USB thumb drive using your home computer 6 Insert the USB thumb drive into the USB port on the back of the TV 7 Press the MENU button on the remote The on screen menu is displayed 8 Use the Arrow buttons on the remote to highlight the Photo icon and press OK The Photo screen is displayed 9 Use the Arrow buttons on the remote to highlight the photo you would like to be displayed first then press the Play button The slideshow begins e To pause the slideshow press the Pause button e

Download Pdf Manuals

image

Related Search

Related Contents

  télécharger le fichier PDF ici - MRC  Manuel d`utilisation  L160 SL - Walter Meier  Samsung GT-S8300 Korisničko uputstvo  Samsung Caramel  E-P132-W User Manual  KitchenAid 4KUIS185S Ice Maker User Manual  Hustler Turf 42 Lawn Mower User Manual  Cables Direct B6LZ-601B networking cable  

Copyright © All rights reserved.
Failed to retrieve file