VIZIO VHT210 soundbar speaker
Contents
1. This plug will fit only into a grounded power outlet This is a safety feature If your outlet does not accommodate the three pronged have an electrician install the correct outlet or use an adapter to ground the Sound Bar safely e Do not defeat the safety purpose of the grounded plug e When connected to a power outlet power is always flowing into the Sound Bar To totally disconnect power unplug the power cord e The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un isolated dangerous voltage within the inside of the Sound Bar that may be of sufficient magnitude to constitute a risk of electric shock to persons e The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying your Sound Bar e Do not overload power strips and extension cords Overloading can result in fire or electric shock e The wall socket should be located near the Sound Bar and be easily accessible 2 www VIZIO com VIZIO VHT210 User Manual e Do not touch the power cord during lightning To avoid electric shock avoid handling the power cord during electrical storms e Unplug the Sound Bar during a lightning storm or when it will not be used for long periods of time This will protect the Sound Bar from damage due to power surges e Do not attempt to repair or service2. or component damage e A distance of at least 3 feet should be maintained between the Sound Bar and any heat source such as a radiator heater oven amplifier etc Do not install the Sound Bar close to smoke Operating the Sound Bar close to smoke or moisture may cause fire or electric shock e Slots and openings in the back and bottom of the cabinet are provided for ventilation To ensure reliable operation of the Sound Bar and to protect it from overheating be sure these openings are not blocked or covered Do not place the Sound Bar in a bookcase or cabinet unless proper ventilation is provided e Never push any object into the slots and openings on the Sound Bar enclosure Do not place any objects on the top of the Sound Bar Doing so could short circuit parts causing a fire or electric shock Never spill liquids on the Sound Bar e The Sound Bar should be operated only from the type of power source indicated on the label on the AC DC Adapters If you are not sure of the type of power supplied to your home consult your dealer or local power company e Only power of the marked voltage can be used for your Sound Bar Any other voltage than the specified voltage may cause fire or electric shock e The power cord must be replaced when using different voltage than the voltage specified For more information contact your dealer e The Sound Bar AC DC Adapters are equipped with a three pronged grounded plug a plug with a third grounding pin
3. remote control or does not respond at all check the battery If the battery is low or exhausted replace it with a fresh battery e When not using the remote control for a long period of time remove the batteries e Do not take the battery apart heat it or throw it into a fire e Do not subject the remote control to undue physical stress such as striking or dropping it e Do not attempt to clean the remote control with a volatile solvent Wipe it with a clean damp cloth Version 5 2 2010 11 www VIZIO com VIZIO VHT210 User Manual Replacing the Battery in the Remote Control 1 Turn the remote control over 2 Slide the back cover down 3 Remove the battery cover 4 Insert a replacement Lithium Button Battery into the remote control Make sure that you match the symbol on the battery with the symbol on the battery holder 5 Replace the battery cover Precautionary Tips for Inserting the Batteries e Only use the specified battery e Inserting the battery incorrectly may result in damage to the remote control e Dispose of the battery in accordance with local laws and regulations e Keep the battery away from children and pets Programming a Universal Remote If you own a VIZIO TV with a Universal Remote you can program a device button such as AUX or AUDIO to control the Sound Bar If your remote uses a 5 digit programming code use code 31517 If your remote uses a 4 digit code use 1517 This will map the U
4. 0 User Manual gt A ep wel A D Q gt O A ct O 5 0 Sound Bar Two Channels Left and Right Each channel consists of two 2 Drivers and one 3 4 Tweeter Subwoofer One 5 AT long throw high excursion driver Frequency Response 100Hz 20KHz Sound Bar Frequency Response 40Hz 100Hz Subwoofer Amplifier Sound Bar Integrated Class D 20x2 channel w 0 01 THD 25W x 2 Up to 60 feet Clear Line of Sight Amplifier Subwoofer Subwoofer Wireless Range 1x Optical Digital Audio S PDIF 1x Stereo Audio VIZIO HIGH DEFINITION 2 1 Surround Sound with Dolby Digital Universal High Definition Sound Bar with elegant design for any HDTV 2 1 solution with High Performance Sound Bar Wireless Subwoofer and Master Remote Control SRS TruSurround enables compelling Virtual Surround experience SRS TruVolume eliminates undesirable loud commercials and channel to channel variances Flexible stand supporting both desktop and wall mount configurations Easy setup with a single cable from TV to Sound Bar and self sync wireless subwoofer Remote Control with Power Master Volume Control Mute SRS TruSurround Sound cycles through off TSHD WOW SRS TruVolume On Off iPod direct input select RCA direct input select OPTICAL direct input select Sub Bass Treble Sound Bar 100 dB SPL Subwoofer 95 dB SPL Sound Pressure Level Power Input AC Power Brick with 6 p
5. 1 www ViZlO com Index Connecting Equipment ANIO EE 9 A O E A 9 iPod DOCK Player iia dci 10 Ds ed EE 9 Connections eil e A OTS EE 7 SUDWOO ida 7 CONS rats ad di cade ae ae 5 Controls TOP Ranes lod as do di 8 MUE IOC Ooh ised tence rastas 8 iPod Dock CONMMOGUING EE 10 LED EMO ee 16 DUE Tee E 13 le EE 13 SRS TruSunrOund el RE 14 SRS TruSurround WOW 14 SRS TruVoOluMe 1 0 00 c ccc ceceececeeceeeececeeceeeeceeeeeeeaeaes 14 Slatuis wie Leela AA tie ee el ee ot 13 NOMIC io weitere ais 13 Link CR EE 13 VE Tier Ee ei EEN 15 Optical Connecting testi eeu aca 9 RS 15 22 LIK UL ON a dea E 7 SUD WOOT ebe eege bes 15 POWER daa 8 Remote Control Battery Installaton neee neee reene 12 A 11 E A TO 11 S PDIF CONASCIN O HE 9 safety IMSMUCIONS sida 2 Specifications NEEN 19 SRS TruSurround HD Ee 14 SRS TruSurround WOW E a re be 14 SRS TruVolume LED iaa 14 Subwoofer COMME GUNG iia aa 7 leet ele EE 16 Paing EE 15 Support Intormaton 18 Reiler ee le e DEEN 17 VOM geet 8 Re 13 Using Vizio TV Remote 12 Wal MOUMING EEN 6 Warranty EE 21 www VIZIO com
6. 10 User Manual Chapter 6 Maintenance and Troubleshooting Maintenance Important e Make sure that the power cables are removed from the back of the Sound Bar or Sub Woofer before cleaning e Do not use volatile solvent such as toluene rosin and alcohol to clean the Sound Bar or Sub Woofer Such chemicals may damage the Sound Bar or Sub Woofer housing Cleaning the Housing and Remote Control e Use a soft cloth for cleaning e Ifthe housing is seriously contaminated use a soft cloth moistened with diluted neutral cleaner to clean the display Wring water out of the cloth before cleaning to prevent water from penetrating into the housing Wipe the housing with a dry cloth after cleaning Pairing Your Sound Bar operates in unison with the Wireless Subwoofer and they come paired from the factory Follow the procedure below if pairing is needed 1 Connect cables to the Sound Bar see Connecting Equipment on page 13 for detailed steps 2 Connect the power adapter to the back of the Sound Bar and the power cord to the back of the subwoofer and then plug them into a wall outlet 3 Turn on the Sound Bar and subwoofer 4 Pair and link the subwoofer to your Sound Bar following the steps in the table below a First pair the subwoofer and your Sound Bar b Then link the subwoofer to your Sound Bar select the Sound Bar as the source of audio Press for Starts flashing Press INPUT for aes Sound Bar more than 5 slowly after GE
7. Sound Bar yourself Opening or removing the front cover may expose you to high voltages electric shock and other hazards If repair is required contact your dealer and refer all servicing to qualified service personnel e Keep the Sound Bar away from moisture Do not expose the Sound Bar to rain or moisture If water penetrates into the Sound Bar unplug the power cord and contact your dealer Continuous use in this case may result in fire or electric shock e Do not use the Sound Bar if any abnormality occurs If any smoke or odor becomes apparent unplug the power cord and contact your dealer immediately Do not try to repair the Sound Bar yourself e Avoid using dropped or damaged appliances If the Sound Bar is dropped and the housing is damaged the internal components may function abnormally Unplug the power cord immediately and contact your dealer for repair Continued use of the Sound Bar may cause fire or electric shock e Do not install the Sound Bar in an area with heavy dust or high humidity Operating the Sound Bar in environments with heavy dust or high humidity may cause fire or electric shock e Ensure that the power cord and any other cables are unplugged before moving the Sound Bar e When unplugging the Sound Bar hold the power plug not the cord Pulling on the power cord may damage the wires inside the cord and cause fire or electric shock When the Sound Bar will not be used for an extended period of time unplug the powe
8. VIZIO VHT210 User Manual Dear VIZIO Customer Congratulations on your new VIZIO High Definition Sound Bar System purchase Thank you for your support For maximum benefit please read these instructions before making any adjustments and retain them for future reference We hope you will experience many years of enjoyment from your new VIZIO HD Sound Bar System For assistance please call 877 668 8462 or visit us at www vizio com To purchase or inquire about accessories and installation services for your Sound Bar please visit our website at www vizio com or call toll free at 888 849 4623 We recommend you register your Sound Bar at our website www VIZIO com or fill in your registration card and mail it in For peace of mind and to protect your investment beyond the standard warranty VIZIO offers extended warranty service plans These plans give additional coverage during the standard warranty period Visit our website or call us to purchase a plan Write down the serial number located on the back of your Sound Bar Purchase Date Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories GIG GIG StudioSound HID and TruVolume are trademarks of SRS Labs Inc StudioSoundHD and TruVolume technologies are incorporated under license from SRS Labs Inc DO DOLBY DIGITAL iPhone iPod iPod Classic iPod nano iPod shuffle and iPod touch are trademarks of Appl
9. e Inc registered in the U S and other countries 2010 All rights reserved The V VIZIO VIZIO XVT VIZIO VIA TruLED 240Hz SPS Slim Line Smooth Motion Where Vision Meets Value names phrase and symbols are trademarks or registered trademarks of VIZIO Inc All other trademarks are of their respective owners Contents subject to change without notice Version 5 2 2010 1 www ViZlO com VIZIO VHT210 User Manual Important Safety Instructions The Sound Bar is designed and manufactured to operate within defined design limits and misuse may result in electric shock or fire To prevent the Sound Bar from being damaged the following rules should be observed for its installation use and maintenance Please read the following safety instructions before operating the Sound Bar Keep these instructions in a safe place for future reference e To reduce the risk of electric shock or component damage switch off the power before connecting other components to the Sound Bar e Unplug the power cord before cleaning the Sound Bar A damp cloth is sufficient for cleaning Do not use a liquid or a spray cleaner on the Sound Bar Do not use abrasive cleaners e Always use the accessories recommended by the manufacturer to insure compatibility e When moving the Sound Bar from an area of low temperature to an area of high temperature condensation may form in the housing Wait before turning on the Sound Bar to avoid causing fire electric shock
10. er for Sound Bar Power cable for subwoofer Remote control and battery Sound Bar stands amp screws pre installed 2 RCA stereo cable User Manual Quick Start Guide Version 5 2 2010 5 www VIZIO com VIZIO VHT210 User Manual Wall Mounting the Sound Bar The Sound Bar can either be kept on the stand or mounted on the wall If you choose to mount the Sound Bar on the wall follow the instructions below for removing the stand 1 2 3 Remove the stands from their original configuration as shown in Figure 1 Flip the stand over and re attach to the Sound Bar as shown in Figure 2 Connect Audio and Video Cables to the Sound Bar see Connecting Equipment on page 13 for detailed steps Connect the power cord to the power cord connector on the back of the Sound Bar Mark and drill holes in the desired location Use anchors not included if you are not drilling into studs Insert screws not included leaving room for the Sound Bar stands Hang your Sound Bar on the screws Caution e Make sure that there are no electrical cables hidden behind walls before you begin to drilling e If wall mounting of the Sound Bar is planned purchase a right angle RCA cable to avoid mounting interference Figure 1 Figure 2 6 www VIZIO com VIZIO VHT210 User Manual Chapter 2 Basic Controls and Connections Sound Bar Connections Service 1 SERVICE Service connection for system upgrades performed by service
11. gle RCA cable to avoid mounting interference e Refer to your MP3 Player user manual for more information about the audio output settings and connections of the product CAUTION Do not connect the MP3 Player headphone output directly to the Sound Bar This can result in damage to the devices A docking unit or equivalent conversion unit is required to adapt line level audio to the Sound Bar Sub Woofer Placement With wireless connectivity of up to 60 feet the wireless subwoofer can be placed anywhere in your home theater room For best sound performance from the subwoofer place it directly on the floor and if possible in a corner of your home theater room 10 www ViZlO com VIZIO VHT210 User Manual Chapter 4 VIZIO Remote Control Remote Control Buttons j Power O Press to turn your Sound Bar on or off VOL Press to turn the speaker system volume up or down MUTE Press to turn the sound on and off Note this will not mute any connected headphones Play Pause Previous Next 144 TNL When music is being played from an iPod on the optional wireless dock press these buttons to control playback If a 3rd party audio application is being used on the iPod Touch or iPhone such as Pandora these transport keys do not control playback of the application Sub Press to increase or decrease the volume output of the subwoofer relative to the overall system volume The indicator on the front of the Sound Bar l
12. he user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Notice Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment Shielded interface cables and AC power cord if any must be used in order to comply with the emission limits The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment It is the responsibility of the user to correct such interference Compliance Caution Always use a power cable that is properly grounded Please use the AC cords listed below for each area USA UL Canada CSA Germany VDE UK BASE BS Japan Electric Appliance Control Act 20 www VIZIO com VIZIO VHT210 User Manual ONE YEAR LIMITED WARRANTY ON PARTS AND LABOR Covers units purchased as new in United States and Puerto Rico Only VIZIO provides a warranty to the original purchaser of its products against defects in materials and workmanship for a period of one year of non commercial usage and ninety 90 days of commercial use If a VIZIO product is defective within the warrant
13. ights to indicate the volume level BASS Press to increase or decrease the bass output of the overall system The indicator on the front of the Sound Bar lights to indicate the level TREB Press to increase or decrease the treble output of the overall system The indicator on the front of the Sound Bar lights to indicate the level SRS TVOL Press to control the level of audio output to prevent commercials from being louder than the volume of the program being viewed The right blue indicator under the SRS logo lights when SRS TruVolume is on SRS TSHD Press to turn SRS TruSurround HD or SRS WOW HD on or off The left indicator under the SRS logo lights blue when SRS TruSurround HD is on and lights orange when SRS WOW HD is on IN OPTICAL iPod Press these buttons to select the desired input The indicators on the front of the Sound Bar light to indicate the selected input as described in Input Indicators on page 13 Remote Control Range e Point the remote control at the remote control sensor to transmit the commands e Do not place any obstacles between the remote control and the receiver window e The effective range of the remote control is approximately 30 feet 10 meters from the front of the receiver window 30 to the left right up and down Remote Control Precautions e The remote control should be kept dry and away from heat sources Avoid humidity e lf the Sound Bar responds erratically to the
14. more than 3 e is in pairing seconds flashing fast panng mone seconds tanne mode fast Press and Subwoofer selects hold for 1 to Begins flashing Sound Bar as fast 3 seconds audio source Version 5 2 2010 15 www VIZIO com VIZIO VHT210 User Manual Sound Bar Error Codes If an unsupported rate or sample depth is detected via the Optical Input or an overcurrent or thermal shutdown occurs the LEDs flash error codes One example is when AC3 not PCM from a DVD player is sent to the optical input The Sound Bar will mute the audio output and the LEDs will flash an error pattern Configure the DVD player or audio source device audio output format to PCM or PCM stream Or use the Analog RCA inputs from the audio source to the Sound Bar Optical rate Configure the audio sample rate of the audio source device either unsupported 48KHz or 44 1 KHz Reduce the volume setting of the Sound Bar and Subwoofer temporarily and turn the unit off for a short period to reset the circuitry If this continues to occur then reduce the volume level for the content being played Optical compressed format detected Overcurrent error Turn off the Sound Bar and verify the ventilation slots in the bar Thermal shutdown are clear the bar has proper ventilation and is not being operated in an environment that is too hot Short On No wireless network Long Off link ena Oi Network available but e gon no audio link to the Any button pres
15. nd Bar is receiving DTS but cannot decode it Set the output of your indicator is blinking device to Dolby Digital or PCM Refer to the instructions that came with your device Buzzing or humming ie Make sure that both ends of the audio cables are connected securely e Test on an alternate device or replace the audio cable e Test the device and cable on an alternate input on the Sound Bar Version 5 2 2010 17 www VIZIO com VIZIO VHT210 User Manual Telephone amp Technical Support Products are often returned due to a technical problem rather than a defective product that may result in unnecessary shipping charges billed to you Our trained support personnel can often resolve the problem over the phone For more information on warranty service or repair after the warranty period please contact our Support Department at the number below Customer support and quality service are integral parts of VIZIO s commitment to service excellence For technical assistance contact our VIZIO Technical Support Department via email or phone Web www vizio com Email techsupport vizio com Tel 877 698 4946 Fax 949 585 9563 Hours of operation Monday Friday 6 am to 9 pm Saturday Sunday 8 am to 4 pm Please have your VIZIO model number serial number and date of purchase available before you call VIZIO Address 39 Tesla Irvine CA 92618 USA Telephone 949 428 2525 Fax 949 585 9514 18 www ViZlO com VIZIO VHT21
16. nformation on pairing Vol Press to turn the speaker volume up or down Remote Control Sensor The sensor is located to the right of the LED window Point the remote control directly at this window for the best response to the remote signal Button Combinations Some buttons when pressed in combination with other buttons will perform other procedures e Volume Up Volume Down Press and hold for one second to mute the Sound Bar e Power Volume Up Volume Down Press and hold for 10 seconds to return the Sound Bar to factory default mode Important DO NOT ATTEMPT to remove the speaker grill as it will void your warranty 8 www VIZIO com VIZIO VHT210 User Manual Chapter 3 Connecting Equipment Digital Connection If your device TV Set top Box DVD Player Home Theater System VCR Computer etc has an Optical digital audio output you can connect it to the OPTICAL jack on the Sound Bar N oe Ge OPTICAL S PDIF Turn off power to the Sound Bar and the device Connect one end of the Optical S PDIF cable sold separately to the digital audio output on the device Connect the other end of the Optical S PDIF cable to the OPTICAL jack on the Sound Bar Turn on power to the Sound Bar and the device Select Dolby Digital as the audio source on the device or set the device to output PCM audio Refer to the user manual that came with your device for more information Select the optical input by
17. niversal Remote to operate the Sound Bar System as follows Note Not all functions of the Sound Bar will be available through your Universal Remote Control such as bass and treble Use the Sound Bar remote control for those functions Controlling Volume using a VIZIO Universal Remote Control VIZIO Universal remotes are normally set to control the volume of the TV even when one of the other programmable devices is selected To set the Universal Remote Control to control the Sound Bar volume 1 Press and hold the SETUP button on your VIZIO Universal Remote Control until the indicator flashes twice 2 Press 9 9 3 The indicator flashes twice 3 Press the device button that you want e g DVD AUDIO CABLE or TV The indicator flashes twice Sound Bar volume will now be controlled using VOL VOL on the Universal Remote Control while controlling other devices 12 www ViZlO com VIZIO VHT210 User Manual Chapter 5 Using your Sound Bar Sound Bar Indicator and LED Status The blue indicator panel and the LEDs on the front of the Sound Bar lights to indicate status The blue indicator panel can be seen through the speaker grill and the LEDs are located in the LED window under the VIZIO logo When you press a button on the remote control or on the top of the Sound Bar the indicator and LED lights as described below Volume Indicators The number of bars increase as the volume is turned up and decrease as the volume is turned do
18. ower cable for Sound Bar Integrated Power Supply on Subwoofer with 6 power cable 100 240VAC 50 60Hz Dimensions Sound Bar 31 5 W x 4 H x 3 125 D 800mm x 102mm x 80mm w stand Dimensions Sound Bar 31 5 W x 3 25 H x 3 125 D 800mm x 83mm x 80mm w out stand Voltage lt d cas O 5 O N N O zech o 19 www VIZIO com VIZIO VHT210 User Manual Dimensions Subwoofer 11 18 W x 13 H x 11 86 D 284mm x 330 21mm x 301 31mm Net Weight Sound Bar 4 6 lbs 2 1Kg w stand Net Weight Sound Bar 4 0 lbs 1 8Kg w out stand Net Weight Subwoofer 8 2 lbs 3 7Kg 24 lbs 10 9Kg Compliances cULus FCC NOM Product specifications may change without notice or obligation FCC Class B Radio Interference Statement NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on t
19. p Items not covered include but are not limited to cosmetic damage normal wear and tear misuse signal issues power surges damages from shipping acts of God any type of customer misuse installation customer modifications adjustments and set up issues Units with unreadable or removed serial numbers image burn in and routine maintenance are not covered This warranty does not cover products sold AS IS FACTORY RECERTIFIED or by a non authorized reseller THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE ANY IMPLIED WARRANTIES INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE VIZIO S TOTAL LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE COVERED PRODUCT VIZIO SHALL NOT BE RESPONSIBLE FOR LOSS OF USE COMMERCIAL LOSS LOST REVENUE OR LOST PROFITS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE CHECK www VIZlO com FOR THE MOST CURRENT VERSION Version 5 2 2010 2
20. personnel only 2 24V DC Plug the connector from the power adapter here 3 SWITCH Set your Sound bar into Hub or Client mode Leave the switch in Hub mode unless you have more than one product with VIZIO HD Wireless Audio technology See Sound Bar Modes on page 14 for more information about Sound Bar modes 4 OPTICAL S PDIF Optical connector for connection from a device such as a home theater system amplifier receiver set top box or DVD player 5 IN ANALOG L R Connect the analog audio from a device such as a TV set top box DVD player or gaming system Subwoofer Connections 1 Link Button Press this button to pair or link to the Sound Bar The Sound Bar and Subwoofer are paired from the factory See Pairing on page 15 for more information on pairing 2 Power Connect the power cable here 3 ON OFF Press to turn the subwoofer on or off Version 5 2 2010 7 www ViZlO com VIZIO VHT210 User Manual Top Panel Buttons Power O Press to turn your Sound Bar on and off e Press and hold for 3 seconds to put the Sound Bar into standby mode The indicators turn off Input e Press repeatedly to step through the input sources in the following sequence IN Analog In Optical In or iPod if a VIZIO wireless iPod dock is paired with the Sound Bar Go to www vizio com for more information e Press and hold for 3 seconds to put the Sound Bar into pairing mode See Pairing on page 15 for more i
21. pressing INPUT on the top of the Sound Bar or pressing OPTICAL on the remote control Analog Connection L 1 Turn off power to the Sound Bar and the device 2 Connect one end of the audio cable white and red connectors to the analog audio output on the device 3 Connect the other end of the audio cable white and red connectors to the IN jacks on the Sound Bar 4 Turn on power to the Sound Bar and the device 5 Select the associated input by pressing INPUT on the top of the Sound Bar or pressing IN on the remote control Version 5 2 2010 9 www VIZIO com VIZIO VHT210 User Manual Wired Connection to an iPod Dock not supplied by VIZIO 1 Turn off power to the Sound Bar and the MP3 Player 2 Connect one end of the audio cable to the analog audio output on the MP3 player docking unit 3 Connect the other end of the audio cable white and red connectors to the IN jacks on the Sound Bar 4 Turn on the power to the Sound Bar and MP3 Player 5 Select the associated input by pressing IN on the top of the Sound Bar Notes e The iPod and Play Pause Previous Next buttons on the remote control only control a VIZIO branded Pod dock and will not control a 3rd party iPod dock or MP3 player e Most MP3 players commonly use a 1 8 Stereo Mini Jack In this case use a 1 8 stereo mini jack to RCA AV cable sold separately e If wall mounting of the Sound Bar System is planned purchase a right an
22. r cord e To reduce risk of electric shock do not touch the connector with wet hands e Insert the remote control battery in accordance with instructions Incorrect polarity may cause the battery to leak which can damage the remote control or injure the operator e If any of the following occurs contact the dealer e The power cord fails or frays e Liquid sprays or any object drops into your Sound Bar e Sound Bar is exposed to rain or other moisture e Sound Bar is dropped or damaged in any way e The performance of the Sound Bar changes substantially Version 5 2 2010 3 www ViZlO com VIZIO VHT210 User Manual Table of Contents important Safety le Et ee CN 2 la E 4 Chapter Introduction a id 5 SP A 5 Package COME NS rd dos ela isla 5 Wall MOURtMG me Sound Bassat atea idad 6 Chapter 2 Basic Controls and CONNecti0NS ooccconcccnncccnncconnconcnconaconnncconrcnnnrcnnnrrnnnrrnnnrnnnrrnanrrnanrrnnrenannnnnn 7 Souna Bal GC OMMOC IOS EE 7 SUDWOOTEr E einen ei RE 7 TOD Panel BUON EE 8 Chapter 3 COnnecting Ne DT Tu int EE 9 Digital GONE clarito 9 Analog COnMGCHON EE 9 Wired Connection to an iPod Dock not supplied by VlLZIO 10 Sub Wo oofer PIACEMEM EE 10 Chapter 4 VIZIO Remote Control eege eege eege SE 11 Remote Control BuO nana aida 11 Remote Control Rage A aiid ae wae oa 11 Remote Control Precautions ui A A a aes 11 Replacing the Battery in the Remote Control 12 Programming a Universal Remote ban 12 Controlling Vol
23. s clears the error condition and returns the Short off Sound Bar subwoofer to its normal state Subwoofer Error Codes Two short Subwoofer is too hot blinks or overpowered 16 www ViZlO com VIZIO VHT210 User Manual Troubleshooting Guide lf the Sound Bar fails to operate or the performance changes dramatically check the operation in accordance with the following instructions Remember to check the peripherals to pinpoint the source of the problem If the Sound Bar still fails to perform as expected contact the VIZIO for assistance by calling 1 877 MYVIZIO 1 877 698 4946 or e mail us at techsupport vizio com No power Press the Power button on the remote control or the top of the Sound Bar Make sure power cords are securely connected to the electrical outlet and on the back of the Sound Bar and Subwoofer Make sure the power LEDs on the power adapters are glowing green Plug another electrical device to the power outlet to verify that the outlet is working No sound Press the Volume Up button on the remote control or the top of the Sound Bar Press MUTE on the remote to make sure the Sound Bar is not muted Press IN OPTICAL or iPod on the remote control or INPUT on top of the Sound Bar to select a different input source No sound in Optical The data contains an unsupported format such as DTS or there is an error in the In data stream Select a supported format such as AC3 or PCM The orange Dolby Your Sou
24. ss SRS TSHD on the remote control to switch between the modes SRS TruVolume LED Lights blue when SRS TruVolume is on Press SRS TVOL on the remote control to turn SRS TruVolume on or off Hub Client Mode LED e Lights blue when the Sound Bar is in Client Mode e Lights orange when the Sound Bar is in Hub Mode e Flashes slowly when your Sound Bar cannot find a suitable network as a Client or is the only device currently in the network as a Hub e Flashes quickly when your Sound Bar is pairing For a Hub device pairing overrides the link state and your Sound Bar may indicate that is it pairing even if it is already connected with other devices in the network e See Sound Bar Modes below for more information about Sound Bar modes Sound Bar Modes Your VIZIO Sound Bar has two modes Hub Mode and Client Mode Use the switch on the back of your Sound Bar to set the mode See Sound Bar Connections on page 7 to see the location of the switch Hub Mode If you have only one Sound Bar set the switch to Hub mode If the switch is in Client mode your Sound Bar will not be able to communicate with the subwoofer Client Mode If you purchase additional products with VIZIO HD Wireless Audio technology in the future consult those user manuals for the best way to wirelessly connect them to your Sound Bar Your Sound Bar should only be operated in Client Mode if recommended by the accessories user manual 14 www VIZIO com VIZIO VHT2
25. ume using a VIZIO Universal Remote Control 12 Chapter 5 Using your Sound Ba EE Bes yas Salat do ete eaters 13 sound Bar Indicator and LED Status EE 13 o NR O 13 IMPUNES o e ido rs llei 13 Sound Bar Mods 1 EE EEN 14 FDO A A EE 14 STE ugi lee TEE EE EE 14 Chapter 6 Maintenance and TroubleShooting cccccccceeeeeeeeeeeceneeeseneeeceneeseeeeseaseesaaeeesaneeeoneeseneenees 15 Manten an EE 15 Seille E PEA EE E E A 15 Sound Bal EtrOr ele EE 16 SUDWOOIE heel 16 FROUBIGSMOOTING E e 17 Telephone amp Technical Support 2 0 0 0 cece cceccccesceceeeeceeeeeceeeeeseaeeesaeeeseaeeeseeesseseeesaeeessaeeeseeeessuseessaaees 18 Chapter 7 Specifications eege dla 19 FCC Class B Radio Interference StateMent 2 0 0 0 ccc cece ccc ccecececcecececececeaecececeeaeaececeeaeaeseaeceeueaeaeaeseeees 20 Sopa ae a et enema amen ieee A lc od ee 20 ONE YEAR LIMITED WARRANTY ON PARTS AND LABO NEEN NEEN NEEN ANNE 21 NING OX ENEE 22 A www ViZlO com VIZIO VHT210 User Manual Chapter 1 Introduction Opening the Package Your Sound Bar and its accompanying accessories are carefully packed in a cardboard carton that has been designed to protect it from transportation damage Once you have opened the carton check that your Sound Bar is in good condition and that all of the contents are included IMPORTANT Save the carton and packing material for future shipping Package Contents VIZIO High Definition Sound Bar Wireless Subwoofer Power adapt
26. wn When the Sound Bar is muted the indicator blinks at the current volume setting The indicator will turn off after five seconds Input Indicators DAH The indicators change to double bars when changing the input mode When INPUT on the Sound Bar or the IN OPTICAL or iPod buttons on the remote control are pressed the corresponding indicators begin flashing 1 IN Analog In 2 Optical 3 iPod Link LED Lights orange and indicates the pairing or linking process between the Sound Bar and the subwoofer The LED blinks fast to indicate pairing is taking place When paired the LED will light solid orange If it is not paired the LED will blink slowly The Sound Bar and Subwoofer are paired from the factory See Pairing on page 15 for more information on the pairing process Dolby Digital LED Lights blue when a Dolby Digital signal is detected The LED flashes orange if your Sound Bar receives a non Dolby Digital bitstream audio source such as DTS If this happens you can either select the Dolby Digital audio track on the Blu ray or DVD source or change the device to output PCM audio over the Optical S PDIF connection Refer to your device s user manual for information Version 5 2 2010 13 www ViZlO com VIZIO VHT210 User Manual SRS TruSurround HD SRS WOW HD LED Lights blue when SRS TruSurround HD best for movie TV content is on and lights orange when SRS WOW HD best for music content is on Repeatedly pre
27. y period VIZIO will either repair or replace the unit at its sole option and discretion To obtain warranty service contact VIZIO Technical Support via email TechSupport VIZIO com or via phone at 877 MY VIZIO 877 698 4946 from 6 00AM to 9 00PM Monday through Friday and 8 00AM to 4 00PM Saturday and Sunday Pacific Time or visit www VIZIO com Proof of purchase in the form of a purchase receipt or copy thereof is required Parts and Labor There will be no charge for parts or labor during the warranty period Replacement parts and units may be new or recertified at VIZIO s option and sole discretion Replacement parts and units are warranted for the remaining portion of the original warranty or for ninety 90 days from warranty service or replacement whichever is later Type of Service Units must be sent to a VIZIO service center VIZIO is not responsible for transportation costs to the service center but VIZIO will cover return shipping to the customer PRE AUTHORIZATION IS REQUIRED BEFORE SENDING ANY UNIT IN FOR SERVICE Any returns to VIZIO s service centers must utilize either the original carton box and shipping material or a replacement box and material provided by VIZIO which may be provided free of charge VIZIO technical support will provide instructions for packing and shipping the unit to the VIZIO service center Limitations and Exclusions VIZIO s one year limited warranty only covers defects in materials and workmanshi
Download Pdf Manuals
Related Search