Bogen BCIRS multimedia motion sensor
Contents
1. Spring Street Ramsey NJ 07446 USA The product will be returned to you freight prepaid This warranty does not extend to any of our products that have been subjected to abuse misuse improper storage neg lect accident improper installation or have been modified or repaired or altered in any manner whatsoev er or where the serial number or date code has been removed or defaced THE FOREGOING LIMITED WARRANTY IS BOGEN S SOLE AND EXCLUSIVE WARRANTY AND THE PURCHASER S SOLE AND EXCLUSIVE REMEDY BOGEN MAKES NO OTHER WARRANTIES OF ANY KIND EITHER EXPRESS OR IMPLIED AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FIT NESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED AND EXCLUDED TO THE MAXIMUM EXTENT ALLOWABLE BY LAW Bogen s liability arising out of the manufacture sale or supplying of prod ucts or their use or disposition whether based upon warranty contract tort or otherwise shall be limited to the price of the product In no event shall Bogen be liable for special incidental or consequential damages including but not limited to loss of profits loss of data or loss of use damages arising out of the manufac ture sale or supplying of products even if Bogen has been advised of the possibility of such damages or loss es Some States do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you This warranty gives you specific legal rights and you may2. all sections may not apply to your system Please read the instructions pertaining to your system completely before operating This manual first lists the features of the Enhancer and then shows you how to operate the system After reading the receiver instructions turn to the section that covers the type of transmitter and microphone you are using with the system Each section will give you detailed operating instructions Also included in this manual are system specifications as well as warranty and servicing information Enhancer System Contents BCWR Dual Channel Infrared Receiver 1 BCWBT Body Pack Transmitter 1 BCLM Clip on Lavaliere Microphone 1 BCHM Headset Microphone 1 BCBM Body Pack Microphone 1 BCIRS Infrared IR Sensors 2 each with Mounting Brackets and 35 foot Cable 6 Foot RCA Audio Cable 1 Adjustable Body Pack Lanyard 1 AC Power Adapter 1 AA Alkaline Batteries 2 Instruction Manual 1 Available Accessories BCWHT Handheld Microphone Transmitter BCHRBP Handheld Rechargeable NiMH Battery Pack BCBC Dual Handheld NiMH Battery Pack Charger BCBRBP Body Pack Rechargeable NiMH Battery Pack BCBRA Body Pack NiMH Battery Pack Charger BCWBT Body Pack Transmitter additional quantities includes adjustable lanyard BCHM Headset Microphone additional quantities BCLM Clip on Lavaliere Microphone additional quantities BCIRS Infrared Sensor additional quantity
3. the AC Power Adapter connect the AC Power Input 6 to an AC outlet 110 120V AC Turn ON the BCWR Receiver using the Power Switch 1 The IR Reception LED Indicators 2 will now light either green or red depending on whether the corresponding transmitters are ON or OFF BCIRS Infrared IR Sensors Operation The IR Sensors act as antennae for your infrared wireless microphone system A multiple array of wide angle IR sensitive LEDs behind the front panel receptors receive the infrared signal emitted by your IR Transmitter Connect each BCIRS Sensor to the rear jacks on the BCWR labeled IR In then turn the BCWR Receiver ON The Sensor Power LED 1 will light to indicate that the sen sor is properly connected to the BCWR Receiver The Channel A and B IR LED indicators will light green when an infrared signal on the corresponding channel is detected Installation The BCIRS Sensors can be mounted on any surface using any of the Mounting Brackets 2 and screws included To ensure proper operation observe the following installation rules a Position the IR Sensors with their front panel receptors facing the entire area of transmitter operation If this is a wide area angle the receptors to cover the maximum area range Note The IR sensors will need to be positioned differently for each environment During installation power up the Bogen Enhancer System and have one person walk around the desired location with the transmitt
4. the unit Note Make sure the trans mitter is OFF when changing the batteries Operation The BCWBT is provided with a 3 5mm Locking Jack 3 for con necting a microphone Plug in the microphone and secure the con nection by turning the metal slip ring on the plug clockwise to thread it on the jack To unplug reverse the process Clip the transmitter to your clothes belt or for best results hang the trans mitter around your neck using the supplied lanyard Make sure the BCWBT Emitter 4 has a clear line of sight with the BCIRS IR Sensors See pages 8 and 9 for operation information on micro phones Attach lanyard to the BCWBT by feeding the strap up and underneath the belt clasp on the rear of the unit Connect the lanyard strap by snapping the interlock ing clasps together Place the lanyard loop over the head and neck and position the break away clasps at the back of the neck Adjust the length of the lanyard by moving the cinching ball up or down until the BCWBT is at a comfortable length b Adjust the BCWBT s Volume Control 5 to minimum and slide the Power Switch 6 to the ON position The two color Power ON LOW Battery LED Indicator 7 will light green indicating that the transmitter is ON In the case of low power batteries the indicator will light red indicating that the alkaline batteries should be replaced with fresh ones or the NiMH batteries should be recharged Note The Rechargeable Battery Pack should only
5. BOGEN Bogen Enhancer Instruction Manual 2005 Bogen Communications Inc All Rights Reserved 54 2141 01D 0804 Contents Introduction DU DTE DU 3 Using This Mani al i aceto t da ato HRK d dnt tn Re tente ON nat 3 Enhancer System ek sva sm costas dise tia cuarta fau D M Qd Re et 3 System Features num ie iae ice tae tnb aibi Me RA ice nn it tn e dE aus 4 Receiver una SR Rear 5 BCIRS Infrared IR Sensors u a as NR R A E a a Rai 6 BCWBT Body Pack Transmitter au see ee E aE Md Ee 7 BCHM Headset Microphone une 8 BCBM Body Pack Microphone ananas 8 BCLM Lavaliere Miersphone au 8 Handheld Microphone Transmitter uie sciret een elek 9 Specifications nl 10 Limited Warranty a pd nt nina ni 11 STAG ee EDUC MEO Re TARA teen 11 Introduction The Bogen Enhancer is an infrared wireless microphone system offering professional performance and operating features Infrared transmission is used to reduce room to room interference while sending a sig nal from a presenter s microphone to a dual channel receiver The receiver works in tandem with an amplifier and speaker s to reduce the effects of poor room acoustics and the weakening effect of voice traveling through air Using This Manual This manual provides instructions for operating the Bogen Enhancer wireless system and covers all avail able accessories Depending on your system configuration
6. also have other rights which vary from State to State 8 10 2004 Products that are out of warranty will also be repaired by the Bogen Factory Service Department same address as above or call 201 934 8500 The parts and labor involved in these repairs are warranted for 90 days when repaired by the Bogen Factory Service Department All shipping charges will be at the owner s expense All returns require a Return Authorization number 11 BOGEN COMMUNICATIONS INC 50 Spring St Ramsey N J 07446 Tel 201 934 8500 Fax 201 934 9832 www bogen com
7. be charged with the Battery Charger listed Never attempt to recharge alkaline batteries The optional BCBRA Recharging Adapter can be plugged directly into the DC Input Charge Jack 8 from AC power outlet for easy charging of NiMH batteries When the recharging adapter is plugged in the recharger s LED Indicator will light red The LED Indicator will light green when the batteries are charged Note Always remove batteries from the BCWBT Transmitter when not in use c The BCWR Receiver s IR LED Indicator of the corresponding channel should now be lit green While wearing the microphone and speaking slowly increase the BCWBT s Volume Control 5 and adjust the volume control on the receiver and also on the Mixer PA to the desired level while taking care to avoid acoustic feedback The microphone is now ready to use For optimum performance and range make sure that the IR Emitter 4 is not covered by the body or clothing and has an unobstructed line of sight with the IR Sensor Note Observe care in selecting volume transmitter location and speaker placement so that acoustic feedback howling and screeching will be avoided BCHM Headset Microphone Operation a The BCHM is provided with a 3 5mm Locking Connector 1 for connecting the microphone to the BCWBT Transmitter Plug in the microphone s connec tor and secure the connection by turning the metal slip ring clockwise to thread it on the jack To unplug re
8. ear Audio Mixed output RCA type Jack rear 16V AC 600mA via AC adapter 8W 10 6 x 2 x 7 4 4 Ib Ch A 2 0 MHz or Ch B 2 6 MHz BCBM Body Pack Omni directional Condenser BCLM Lavaliere type Omni directional Condenser BCHM Headset type Uni directional Condenser ON OFF Switch Volume Control Ch A B Select Switch 3 5 mm Locking Jack MIC connection DC Input Charge Jack 2 AA Batteries 2 4V DC BCBRBP BCBRA 2 6 x 3 9 x 1 7 3 6 oz 1 1 oz Ch B 2 6 MHz Uni directional Dynamic Cartridge ON OFF Switch 2 AA Batteries 2 4V DC BCHRBP BCBC 10 2 x 2 2 14 oz The Rechargeable Battery Packs should only be used with the Battery Chargers listed Never attempt to recharge alkaline batteries 10 Limited Warranty Bogen Enhancer products BCWR Receiver BCWBT Transmitter BCLM Lavaliere Microphone BCHM Headset Microphone BCBM Body Pack Microphone BCIRS Infrared Sensors BCYA Multiple Sensor Adapter BCWHT Transmitter Microphone BCBRBP Battery Pack BCHRBP Battery Pack BCBRA Battery Charger and BCBC Battery Charger are warranted to be free from defects in material or workmanship for one 1 year from the date of sale to the original purchaser Any part of the product covered by this war ranty that with normal installation and use becomes defective will be repaired or replaced by Bogen at our option provided the product is shipped insured and prepaid to Bogen Factory Service Department 50
9. ers on while another person positions the IR Sensors for greatest range of mobility b Since the unit utilizes infrared light reflected off of room surfaces do not mount the sensors near a black ceiling wall or heavy curtains as they may limit the range by eliminating such reflections c Although the unit can be used in most brightly lit rooms it works best if bright lights do not shine directly on the sensors Note System is not designed for use in high ambient light conditions such as out doors in sunlight or on stage with strong stage lighting d Never cover the IR Sensors as this will disrupt normal operation If they become dirty clean with a soft cloth Make sure the sensors are not obstructed and always have a clear line of sight to the transmitters e Position sensors and wires away from Plasma TVs and other equipment that may produce high levels of electrical and RF interference Note Additional BCIRS IR Sensors can be added using the BCYA Multiple Sensor Adapter which allows multiple sen sors to be connected to each input BCWBT Body Pack Transmitter Transmitter Setup Slide down the Battery Compartment Cover 1 as shown exposing the battery compartment Insert 2 fresh AA alkaline batter ies or the optional BCBRBP Battery Pack NiMH rechargeable batter ies while observing the correct polarity as marked Set the Channel Selector Switch 2 to the desired channel of operation and slide the cover back into position on
10. gain and thus are also more brone to feedback than close source mics such as handheld and headset mics that are used closer to the mouth BCWHT Handheld Microphone Transmitter Transmitter Setup Unscrew and remove the Battery Compartment Cover 1 by sliding it down off the microphone to expose the battery holder Insert 2 fresh AA alkaline batteries or the optional BCHRBP Battery Pack NiMH rechargeable batteries while observing the correct polarity as marked and screw the cover back on the battery compartment Note Make sure the transmitter is OFF when changing the batteries Operation Slide the Power Switch 2 to the ON position The Power LED Indicator 3 will light green indicating that the transmitter is ON In the case of dead batteries the indicator will be off indicating that the alkaline batteries should be replaced with fresh ones or that the BCHRBP Battery Pack should be recharged Note The optional Battery Pack should only be charged with the BCBC Charger listed Never attempt to recharge alkaline batteries The BCBC can also be used to recharge two BCWHT Handheld Microphones simultaneously When the microphone is placed in the recharging adapter the recharger s LED Indicator will light bright red The LED Indicator will light green when the batteries are charged Note Always remove batteries from the BCWHT microphone when not in use The microphone is now ready to use The BCWR receiver IR LED Indicator
11. includes BCYA Adapter BCYA Multiple Sensor Adapter additional quantity part of BCIRS System Features BCWR Dual Channel Wireless Microphone Receiver e Dual Receiver Simultaneous 2 Channel Operation for 2 Transmitters Ch A Ch B Infrared IR Signal Reception LED Indicators Channel A B Mixed Audio Output RCA type Connector Separate Channel A and Channel B Volume Controls Two IR Sensor Coaxial type Inputs BCWBT Body Pack Transmitter Multiple Emitter Array of High Efficiency Infrared Emission LEDs for Optimum IR Transmission Power On LED Channel A B Selector Switch 3 5mm Locking Jack for Connection of Body Pack Lapel or Headset Microphones Microphone Input Volume Control Belt Clip and Adjustable Neck Worn Lanyard Requires 2 NiMH AA Rechargeable Batteries BCBRBP optional or 2 Alkaline AA Batteries included BCIRS Infrared Sensor Multiple Array of Wide Angle Infrared Sensitive LEDs 35 foot Connecting Cable with Coaxial type Connector Includes Mounting Brackets BCHM Headset BCLM Lavaliere BCBM Body Pack Microphone Microphone Microphone e Ultra light adjustable boom arm Weighs less than one ounce Weighs less than one ounce Close miked vocal pick up Close miked vocal pick up Mounts directly to BCWBT Hands free operation Hands free operation Hands free operation Cardioid polar pattern Omni directional pattern Omni directional pattern BCWHT Handheld Microphone Tra
12. nsmitter Optional accessory sold separately Multiple Emitter Array of High Efficiency Infrared Emission LEDs for Optimum IR Transmission Power On LED Powerful Uni Directional Dynamic Capsule for Optimum Audio Minimum Handling Noise and Maximum Feedback Rejection Rugged Steel Mesh Ballscreen with Anti Roll Ring Requires NiMH Rechargeable Batteries BCHRBP optional or 2 Alkaline AA Batteries included BCWR Receiver CHANNEL ENHANCER C BOGEN 2 INFRARED POWER COMMUNICATIONS INC RAMSEY N www bogen com POWER INPUT Connecting the Audio Output The BCWR Receiver provides an unbalanced line level mixed output to the RCA Jack 3 This can be connected to a mixer or a PA system using the supplied RCA to RCA audio cable The audio of both Channels A and B are mixed together at this output The Channel A and B mix is dependent on the sepa rate Channel A and Channel B Volume Control 4 settings located on the back panel of the receiver Always make sure the mixer P A volume is turned to minimum before plugging the audio cable into the receiver or before turning the receiver ON OFF if the audio cable is already connected to avoid possible sound system damage Connecting the BCIRS IR Sensors Connect the BCIRS Infrared Sensors to the BCWR Receiver by plugging both sensor coaxial type plugs into the Infrared Sensor Inputs 5 Each sensor input will receive both Channels A and B Powering the Receiver Using
13. of the corresponding channel should now be lit green While speaking into the microphone adjust the corresponding Volume Control on the receiver and also on your Mixer PA to the desired level For optimum performance and range make sure that the IR emitter at the base of the transmitter is not covered by the hand and has an unob structed line of sight with the IR sensor Note Observe care in selecting volume transmitter location and speaker placement so that acoustic feedback howling and screeching will be avoided Specifications BCWR Receiver Mode Receiving Channels Carrier Frequency Audio Frequency Response S N Ratio Audio Mix Output Range line of sight Controls Connectors Power Requirements Power Consumption Dimensions W x H x D Weight BCWBT Body Pack Transmitter Carrier Frequency Audio Input Controls Connectors Power Requirements Optional Rechargeable Battery Pack Optional Battery Charger Dimensions W x H x D Weight Transmitter Weight Headset BCWHT Handheld Microphone Transmitter Carrier Frequency Audio Input Controls Power Requirements Optional Rechargeable Battery Pack Optional Battery Charger Dimensions D x Dia Weight Infrared Frequency Modulated Dual Channels A 8 Ch A 2 0 MHz Ch 2 6 MHz 60 Hz 12 kHz gt 90 dB 400 mV Up to 30 ft Power ON OFF front Ch A and B Volume rear IR Sensor Coaxial type Jacks Ch A B rear AC Power input jack r
14. verse the process b Wear Headset 2 so that it wraps around the back of the head The curved Earpieces 3 will fit over the ears c While wearing the Headset adjust the Boom Arm 4 so that the Microphone 5 is about two inches from your mouth Do not place the microphone too close to the mouth BCBM Body Pack Microphone Operation a The BCBM 1 is provided with a 3 5mm Locking Connector 2 for connecting the microphone to the BCWBT Transmitter Plug in the microphone s connec tor and secure the connection by turning the metal slip ring clockwise to thread it on the jack To unplug reverse the process b The body pack must be used with the Lanyard 3 in order to optimize the BCBM When the lanyard is around the user s neck use the Cinch 4 to adjust lanyard length until the BCBM is about six inches from the user s mouth BCLM Lavaliere Microphone Operation a The is provided with a 3 5mm Locking Connector 1 for connecting the microphone to the 3 BCWBT Transmitter Plug in the microphone s connec ER tor and secure the connection by turning the metal slip j7 b Wear the microphone by attaching the Clip 2 to shirt front or jacket lapel The Microphone 3 should point toward the user s mouth ring clockwise to thread it on the jack To unplug reverse the process Note Microphones that are farther from the sound source such as lavaliere mics require more acoustic
Download Pdf Manuals
Related Search