Philips Home cinema speakers HTS7111
Contents
1. Connect audio from TV and other devices Play audio from TV or other devices through your SoundBar Use the best quality connection available on other devices Note e The audio connections in this user manual are only recommendations You can use other connections too e When your SoundBar and TV are connected through HDMI ARC an audio connection is not required Option 1 Connect audio through a digital optical cable Best quality audio Using an optical cable connect the OPTICAL connector on your SoundBar to the OPTICAL OUT connector on the device The digital optical connector might be labeled SPDIF SPDIF OUT or OPTICAL OPTICAL IN 12 EN Option 2 Connect audio through a digital coaxial cable Good quality audio Using a coaxial cable connect the COAXIAL connector on your SoundBar to the COAXIAL DIGITAL OUT connector on the device The digital coaxial connector might be labeled DIGITAL AUDIO OUT DIGITAL IN COAXIAL IN Tip To play video from the device connect the device to the TV through a video connection Option 3 Connect audio through analog audio cables Basic quality audio Using an analog cable connect the AUX connectors on your SoundBar to the audio connectors on the device AUX IN AUDIO IN Tip To play video from the device connect the device to the TV through a video connection Set u2. e Navigation button al Return to the previous menu on the iPod or iPhone or return to the previous SoundBar menu amp Mute ute or restore volume Volume ncrease or decrease volume TREBLE ncrease or decrease treble BASS ncrease or decrease bass AMBISOUND Select an Ambisound auto or stereo mode SETUP Access the setup menu AUDIO SOURCE e OPTI IN Switch your audio source to the optical connection e COAX IN Switch your audio source to the coaxial connection e AUX Switch your audio source to the AUX connection e MUSIC UNK Switch your audio source to the MUSIC iLINK connection EN EasyLink controls With Easylink you can control your SoundBar TV and the connected devices with the standby button on your SoundBar remote control e Standby On Press and hold to switch your SoundBar TV and the connected devices to standby 5 Connect your SoundBar This section helps you connect your SoundBar to a TV and other devices For information about the basic connections of your SoundBar and accessories see the quick start guide For a comprehensive interactive guide see www connectivityguide philips com Note e For identification and supply ratings refer to the type plate at the back or bottom of the product Before you make or change any connections make sure that all devices are disconnected from the power outlet Subwoofer Follow the
3. 253 mm e Weight 44 kg e Cable length 3 m Wall mount e Dimensions WxHxD 80 x 80 x 15 mm e Weight 0 08 kg each Remote control batteries e 2 x AAA R03 1 5 V 10 Troubleshooting Warning e Risk of electric shock Never remove the casing of the product To keep the warranty valid never try to repair the product yourself If you have problems using this product check the following points before you request service If you still have a problem register your product and get support at www philips com welcome Main unit The buttons on the SoundBar do not work e Disconnect the SoundBar from the power supply for a few minutes then reconnect Sound No sound from SoundBar speakers Connect the audio cable from your SoundBar to your TV or other devices However you do not need a separate audio connection when e the SoundBar and TV are connected through HDMI ARC connection or e a device is connected to the HDMI IN connector on your SoundBar Set up the audio for the connected device see Set up audio for connected devices on page 13 e Reset your SoundBar to its factory settings see Apply factory settings on page 19 and hen switch it off and switch on again On your SoundBar press SOURCE repeatedly to select the correct audio input on the display panel e Make sure that the SoundBar is not muted Press amp to select MUTE OFF on the display pane
4. OK WN Display panel Change the brightness of the SoundBar display panel d Press SETUP repeatedly to select DISPLAY on the dispiay panei see Setup menu options and settings on page 18 2 Press OK 3 Press the Navigation buttons A V to select BRIGHT DIM 1 or DIM 2 and then press OK Apply factory settings You can reset your SoundBar to the default settings programmed at the factory In AUX mode within three seconds press TREBLE VOL and BASS L gt When the factory settings restore is complete the SoundBar automatically switches off and restarts 8 Wall mount and stand Before you mount your SoundBar to the wall or onto a single stand read all safety precautions see Safety on page 5 If you have any query contact Philips Consumer Care in your country Wall mount Screw length diameter Depend on the type of wall mounting this wall mount bracket make sure that you use screws of a suitable length and diameter 3 3 5mm gt gt 25mm Before wall mount you can remove the three rubber feet at the bottom of the SoundBar e If you remove the rubber feet you cannot stick them back on the bottom of the SoundBar For information about how to wall your SoundBar see the wall mount guide EN 19 English Stand for SoundBar and TV STS1100 STS1300 If you have a Phili
5. other U S and worldwide patents issued amp pending DTS and the Symbol are registered trademarks amp DTS Digital Surround and the DTS logos are trademarks of DTS Inc Product includes software DTS Inc All Rights Reserved OQI DOLBY DIGITAL PRO LOGIC II Manufactured under license from Dolby Laboratories Dolby Pro Logic and the double D symbol are trademarks of Dolby Laboratories HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC in the United States and other countries 3 Important Read and understand all instructions before you use your SoundBar If damage is caused by failure to follow instructions the warranty does not apply Safety Risk of electric shock or fire e Never expose the product and accessories to rain or water Never place liquid containers such as vases near the product If liquids are spilt on or into the product disconnect it from the power outlet immediately Contact Philips Consumer Care to have the product checked before use e Hever place the product and accessories near naked flames or other heat sources including direct sunlight e Never insert objects into the ventilation slots or other openings on the product e Where the mains plug or an appliance coupler is used as the disconnect device the disconnect device shall remain readily operable e Disconnect the product from the pow
6. steps below to position connect and set up your subwoofer Position Place the subwoofer at least one meter three feet away from either to the left or right of your SoundBar and ten centimeter away from the wall For best results place your subwoofer as shown below 10cm 4 SUB WOOFER Connect Connect your subwoofer to your SoundBar as described in the quick start guide Setup in vann e Wb nen eben ez thraiinh tha eatin man Seti ee tee Ett Press SETUP repeatedly to select SUBW VOL on the dispiay panei see Setup menu options and settings on page 18 Press OK Press the Navigation buttons A V to change the volume Press OK to confirm Press EXIT to exit the menu UB WN Connectors Connect other devices to your SoundBar Side left ts MUSIC iLINK Audio input from an MP3 player Rear left AC MAINS AC MAINS Connect to the power supply EN 9 English Rear center of 1 DIGITAL IN el et rO U CE Ge HDMI OUT ARC TO TV C HDMI IN 1 2 Connect to the HDMI output on the audio devices TO TV HDMI OUT ARC Connect to the HDMI input on the TV DOCK for iPod Connect to a Philips dock for iPod or iPhone Model Philips DCK3060 AUDIO IN AUX Connect to an analog audio output on the TV or an analog device DIGITAL IN
7. ND SETTINGS repeatedly to select AUD ST INC on the dispiay panei see Sound options and settings on page 14 d Press OK 3 Within two seconds press the Navigation buttons A V to change the delay shown on the display panel 4 Press OK to confirm Ambisound Set up Ambisound to give the best surround sound effect Press AMBISOUND repeatedly to select a setting on the display panel e AMBISOUND Surround sound for your room see Ambisound on page 18 e STEREO Two channel stereo sound Ideal for listening to music e AUTO Surround sound based on the audio stream Note e If you play a source with DTS DTS is displayed on the display panel for two seconds e If you play a source with Dolby DOLBY D is displayed on the display panel for two seconds Equalizer Change the high frequency treble and low frequency bass settings of the SoundBar Press TREBLE or BASS to change the frequency shown on the display panel MP3 player Connect your MP3 player to play your audio files or music What you need e An MP3 player e A3 5mm stereo audio cable Play music 1 Connect the MP3 player to the SoundBar as described in the Quick start guide 2 Press AUDIO SOURCE repeatedly to select MUSIC I LINK on the display panel 3 Press the buttons on the MP3 player to select and play audio files or music iPod or iPhone When you connect a Philips dock for iPod iPhone y
8. OPTICAL Connect to an optical audio output on the TV or a digital device DIGITAL IN COAXIAL Connect to a coaxial audio output on the TV or a digital device Sr Oe Connect to TV Connect your SoundBar to a TV You can listen to audio from TV programs through your SoundBar Use the best quality connection available on your SoundBar and TV Option 1 Connect to TV through HDMI ARC Your SoundBar supports HDMI version 1 4 Audio Return Channel ARC If your TV is HDMI ARC compliant connect your SoundBar to the TV through the HDMI ARC connection With HDMI ARC you do not need an additional audio cable to play audio from TV through your SoundBar Using a High Speed HDMI cable connect the HDMI OUT ARC connector on your SoundBar to the HDMI ARC connector on the TV The HDMI ARC connector on the TV might be labeled HDMI IN or HDMI For details on TV connectors see the TV user manual HDMI OUT ARC Rear right IA ECH SUBWOOFER 60 SUBWOOFER Connect to the supplied subwoofer 2 On your TV turn on HDMI CEC For details see the TV user manual L gt The audio from the TV is automatically played on your Soundbar 3 Ifaudio from the TV does not play automatically select the correct video input on the TV Option 2 Connect to TV through an analog audio cable If your TV does not have HDMI connectors con
9. OURCE HDMI ARC if HDMI available ARC output HDMI SOURCE HDMIIN1 or HDMI HDMI IN2 input HDMI ARC can only be selected if you connect your SoundBar to the HDMI ARC compliant V through HDMI ARC see Option 1 Connect to TV through HDMI ARC on page 10 EN 13 English 6 Use your SoundBar This section helps you use the SoundBar to play audio from connected devices Before you start e Make the necessary connections described in the quick start guide and the user manual e Switch the SoundBar to the correct source for other devices Choose your sound This section helps you choose the ideal sound for your video or music Sound options and settings Sound mode Select predefined sound modes to suit your video er music T Press SOUND SETTINGS repeatedly to Sound options and settings on page 14 2 Select a mode and then press OK 3 Press the Navigation buttons A V to select a setting e AUTO Select either MOVIE or MUSIC automatically depend on the sound stream e MOVIE Enjoy a cinematic audio experience specially enhanced for movies e MUSIC Recreate the original recording environment of your music in the studio or at a concert Sound Setting for the option e ORIGINAL Experience the original option sound of your movies and music MODE AUTO without added sound effects MOVIE e NEWS Hear every word with MUSIC GIN o ne e E
10. PHILIPS 2011 Koninklijke Philips Electronics N V All rights reserved sgptt_1131 12_v2
11. Register your product and get support at www philips com welcome HTS 111 EN User manual NL Gebruiksaanwijzing DA Brugervejledning NO Brukerhandbok DE Benutzerhandbuch PT Manual do utilizador EL Eyxeipidio xenons SV Anv ndarhandbok ES Manual del usuario TR Kullan m k lavuzu FI K ytt opas FR Mode d emploi IT Manuale utente PHILIPS Contents 1 Help and support 4 Tutorials 4 FAQs 4 Contact Philips 4 2 Notice 4 Compliance 4 Mains fuse 4 Trademarks 5 3 Important S Safety 5 Care for your product 6 Care of the environment 6 4 Your SoundBar 7 Main unit 7 Remote control 7 5 Connect your SoundBar 9 Subwoofer H Connectors 9 Connect to TV 10 Connect to other devices through HDMI 11 Connect audio from TV and other devices12 Listen to a connected device 13 6 Use your SoundBar 14 Choose your sound 14 MP3 player 15 iPod or iPhone 15 EasyLink 16 7 Change settings 18 Setup menu options and settings 18 Apply factory settings 19 8 Wall mount and stand 19 Wall mount 19 Stand for SoundBar and IV STS1100 STS1300 20 9 Product specifications 20 10 Troubleshooting 21 EN English 1 Help and support Watch video tutorials and find answers to many frequently answered questions FAQs on your product at www philips com Tutorials To set up your SoundBar and get additional information refer to the video tutorials at www philips com support FAQs If
12. d welcome to Philips To fully benefit from the support that Philips offers register your SoundBar at www philips com welcome Main unit 4 SOURCE Select an audio source for the SoundBar Q Standby On e Switch the SoundBar on or to standby e When the SoundBar is in standby the standby indicator turns red GB lt Volume Increase or decrease volume Display panel Remote control for iPod SOUND SETTINGS 3 de EXIT Ht D 6 TREBLE AMBI SOUND PHILIPS O Standby On Switch the SoundBar on or to standby e When EasyLink is enabled press and hold for at least three seconds to switch all connected HDMI CEC compliant devices to standby EN 7 English DE SI OO HDMI SOURCE Switch your audio source to the HDMI connection DOCK for iPod Switch to Philips dock for iPod or iPhone Navigation buttons 4 P A V Navigate menus OK Confirm an entry or selection ttt SOUND SETTINGS Access or exit sound options Dock for iPod iPhone buttons e Hi Stop EXIT Stop play for iPod or iPhone or exit the SoundBar setup menu I gt I Previous Next Skip to the previous or next track or file Press and hold to search backwards or forwards e Ki Play Pause Start pause or resume play Press and hold to switch off the iPod or iPhone
13. er outlet before lightning storms When you disconnect the power cord always pull the plug never the cable Risk of short circuit or fire e Before you connect the product to the power outlet ensure that the power voltage matches the value printed on the back or bottom of the product Never connect the product to the power outlet if the voltage is different Risk of injury or damage to the SoundBar e For wall mountable products use only the supplied wall mount bracket Secure the wall mount to a wall that can support the combined weight of the product and the wall mount Koninklijke Philips Electronics N V bears no responsibility for improper wall mounting that results in accident injury or damage e Hever place the product or any objects on power cords or on other electrical equipment EN 5 English e Ifthe product is transported in temperatures below 5 C unpack the product and wait until its temperature matches room temperature before connecting it to the power outlet e Parts of this product can be made of glass Handle with care to avoid injury and damage Risk of overheating ever install this product in a confined space Always leave a space of at least four inches around the product for ventilation Ensure curtains or other objects never cover the ventilation slots on the product Risk of contamination Do not mix batteries old and new or carbon and alkaline etc e Remove batter
14. ies if they are exhausted or if the remote control is not to be used for a ong time e Batteries contain chemical substances they should be disposed of properly Risk of swallowing batteries e The product remote control may contain a coin type battery which can be swallowed Keep the battery out of reach of children at all times Care for your product Use only microfiber cloth to clean the product Care of the environment s Your product is designed and manufactured with high quality materials and components which can be recycled and reused D When this crossed out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products Please act according to your local rules and do not dispose of your old products with your normal household waste Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health M Your product contains batteries covered by the European Directive 2006 66 EC which cannot be disposed with normal household waste Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health 4 Your SoundBar Congratulations on your purchase an
15. ingle remote control One touch standby When you press and hold Standby on the remote control the SoundBar and all the connected HDMI CEC devices that support one touch standby switch to the standby mode If One touch standby is enabled on your SoundBar you can switch to standby with the remote control of the TV or other connected HDMI CEC devices System Audio Control You need to connect a device to the TV and route its audio output from TV to the SoundBar so that the SoundBar can switch to the corresponding audio source automatically To use one touch audio switch on System Audio Control and map connected devices to the audio input connectors of the SoundBar TV Audio Mapping You need to connect a device to the TV and route its audio output from TV to the SoundBar in order to map the device to the audio input connector see Play audio from SoundBar on page 17 One touch standby The SoundBar and all connected HDMI CEC devices can be switched to standby by a remote contre 1 _ Press SETUP repeatedly to select SYS options and settings on page 18 Press OK Press the Navigation buttons A V to select ON Press OK to confirm Press EXIT to exit the menu UR WN Note Play audio from SoundBar You need to connect an HDMI CEC device to the TV and route its audio output from TV to the SoundBar in order to map the audio of the connected devics to wourScundBar 1 _ Pres
16. l Distorted sound or echo e If you play audio from the TV through the SoundBar make sure that the TV is muted Audio and video are not synchronized es 1 Press tt SOUND SETTINGS repeatedly o select AUD SYNC on the display panel and then press OK 2 Within two seconds press the Navigation buttons A V o change the delay shown on the display panel 3 Press OK to confirm EN 21 English Play When you switch on the TV the SoundBar automatically switches on This behavior is normal when you are using Philips EasyLink HDMI CEC To make the SoundBar work independently switch off EasyLink EasyLink does not work ake sure that the SoundBar is connected o a Philips brand EasyLink TV and the EasyLink option is turned on see Switch on on page 16 Cannot play video or photos from an iPod or iPhone on the TV Browse and select videos and photos from he iPod or iPhone screen and play them on your TV ake sure that the iPod or iPhone software has not been tampered with or illegally modified Cannot view pictures from an iPod or iPhone on the TV 22 Connect a yellow composite cable to the iPod dock and the TV Switch the TV to the AV VIDEO source corresponding to the yellow composite cable Press the play button on the iPod or iPhone to start a slideshow Make sure that the iPod or iPhone software has not been tampered with or illegally modified EN
17. nect your SoundBar to the TV through an analog audio cable connection Using an analog cable connect AUX connectors on your SoundBar to the audio connectors on the TV AUX IN AUDIO IN Select the correct Video input onwour TM Press SOURCE on the SoundBar repeatedly to select the correct audio input see Listen to a connected device on page 13 Lo NI Connect to other devices through HDMI Connect digital devices directly to your SoundBar through an HDMI connection Digital devices can include a Blu ray player set top box games console or camcorder 1 Using a High Speed HDMI cable connect the HDMI OUT connector on your digital device to the HDMI IN connector on your SoundBar HDMI IN1 HDMI IN 2 Bluray Dist Using another High Speed HDMI cable connect the HDMI OUT ARC connector on your SoundBar to the HDMI IN or HDMI ARC connector on the TV On the connected devices turn on HDMI CEC For details see the user manual of the devices select the correct video inniionthe TV Select the correct HDMI input on your SoundBar see Set up audio for connected devices on page 13 Note If you connect the HDMI OUT ARC connector on your SoundBar to an HDMI ARC compliant TV you can either choose to select the audio to output through your SoundBar or through the TV For details about mapping the TV audio see the TV user manual EN 11 English
18. njoy thrilling arcade ORIGINAL sounds ideal for action packed video NEWS games or loud parties GAMING AUTO ON Auto volume VOL OFF NIGHT ON EE OFF 1 Press SOUND SETTINGS repeatedly to AUD 0 MS 10 MS 20 MS 180 MS SYNC 190 MS 200 MS 1 _ Press SOUND SETTINGS repeatedly to access the sound options on the dispiay panel see Sound options and settings on page 14 2 Selecta setting and then press OK 3 Press the Navigation buttons A V to select an option 4 Press EXIT to exit If you do not press a button within ten seconds the menu exits automatically 14 EN seiect AUTO VOL on the dispiay panei see Sound options and settings on page 14 2 Press OK 3 Press the Navigation buttons A F to select a setting e ON Turn on auto volume e OFF Turn off auto volume Night mode For quiet listening decrease the volume of loud sounds when you play discs Night mode is only available for Dolby encoded DVD and Blu ray discs T Press SOUND SETTINGS repeatedly to select NIGHT on the dispiay panei see Sound options and settings on page 14 2 Press OK 3 Press the Navigation buttons A V to select a setting e ON Turn on night mode e OFF Turn off night mode Note e If auto volume is set to ON you cannot enable the night mode Synchronize picture and sound If the audio and video are not synchronized delay the audica to match the video T Press SOU
19. ou can use the SoundBar to play music movies and photos from your iPod or iPhone What you need e A Philips dock Model Philips DCK3060 e A yellow composite cable Note e Philips dock for iPod or iPhone is sold separately Charge your iPod or iPhone on the dock while the SoundBar is in iPod mode Dock your iPod or iPhone 1 Move the slide at the bottom of the dock to STANDARD and then connect the dock to the SoundBar 2 Connect the yellow composite cable to the dock and TV Switch on the iPod or iPhone and place it on the dock EN 15 English Play music 1 Dock your iPod or iPhone see Dock your iPod or iPhone on page 15 2 Press DOCK for iPod Le IPOD appears on the display panel 3 Press the play buttons to control play Button Action Navigation Navigate up and down the buttons A menus INV OK Confirm an entry or selection KMA Skip to the previous or next Previous track or file Press and hold to Next search backwards or forwards gt H Play Start pause or resume play Pause Press and hold to switch off the iPod or iPhone E Stop play for iPod or iPhone or Stop EXIT exit the SoundBar setup menu Navigation Return to the previous menu on button a the iPod or iPhone or return to the previous SoundBar menu Play video and slideshows 1 On iPod enable the TV ON setting On iPhona select the TV Ouk option 2 Dock your iPod o
20. p audio for connected devices When you connect a device to your SoundBar check the audio settings 1 on your TV and other devices turn on HDMI CEC For details see the user manual of the TV and the other device 2 Select Amplifier from the TV speakers manu Far dataile caa tha TV rear manual menu fOr ggn SSS us sy USS MOAT On your SoundBar turn on System Audio Control and then map the audio of the connected device to the correct connectors on your SoundBar see Play audio from SoundBar on page 17 If the connected device is not HDMI CEC compliant press the source button on the main unit or remote control to select the correct audio input on your SoundBar see Listen to a connected device on page 13 Listen to a connected device Before you can listen to a connected device select the source for the device Main unit Press SOURCE on the SoundBar to cycle through and select one of the following audio sources on the display panel HDMI ARC if avaliable gt HDMI IN1 gt HDMI IN2 gt MUSIC I LINK gt IPOD gt AUX gt OPTI IN gt COAX IN Remote control Press AUDIO SOURCE or HDMI SOURCE on the remote control to cycle through and select an audio source as shown in the following table Source button Display text Audio source AUDIO SOURCE OPTIIN Optical input AUDIO SOURCE COAX IN Coaxial input AUDIO SOURCE AUX AUX input AUDIO SOURCE MUSIC P3 input I LINK HDMI S
21. press OK Press the Navigation buttons A VW to select a setting for the option and then press OK WN e If you do not press a button within ten seconds the setup menu exits e To return to the previous menu press the Navigation button al To exit the menu press EXIT settings Setup menu Setting for the Setting for option option the option EASYLINK ON OFF SYS STBY ON OFF AUD CTRL ON OFF TV AUDIO HDMI ARC COAX IN OPTI IN AUX SUBW VOL 5 4 3 0 3 4 5 AMBISOUND POSITION IN FRONT RIGHT LEFT CORNER DISTANCE OM 2M 2M 3M ABOVE 3M DISPLAY BRIGHT DIM 1 DIM 2 Ambisound To give the best surround sound effect select options about your room and the position of the SoundBar 1 _ Press SETUP repeatedly to select APBISOUND on the dispiay panel see Setup menu options and settings on page 18 Press OK Set the position of the SoundBar A Press the Navigation buttons A V to select POSITION and then press OK Press the Navigation buttons A V to select IN FRONT RIGHT LEFT or CORNER and then press OK 4 Set the distance between your listening position and the SoundBar A Press the Navigation buttons A V to select DISTANCE and then press OK Press the Navigation buttons A V to select OM 2M from zero to two meters 2M 3M from two to three meters or ABOVE 3M above three meters and then press
22. ps TV you can mount your SoundBar and the TV onto a single stand Purchase the STS1100 or STS1300 stand from an authorized Philips dealer For instructions on how to install the stand with the SoundBar and Philips TV see the stand quick start guide STS1100 9 Product specifications Specifications and design are subject to change without notice Amplifier e Total output power e Europe and Asia 300W RMS 30 THD e Latin America 224W RMS 10 THD e Frequency response 20 Hz 20 kHz 3 dB e Signal to noise ratio gt 65 dB CCIR A weighted e Input sensitivity e AUX 250 mV E usic iLink 50 mV Audio e S PDIF Digital audio input e Coaxial IEC 60958 3 e Optical TOSLINK Main unit e Power supply 110 240 V 50 60 Hz e Power consumption 55 W e Standby power consumption lt 1 W e Center speaker _ Speaker impedance 6 ohm e Speaker drivers 2 x 64 mm 2 5 full range e Frequency response 150 Hz 20 kHz e Front Rear speakers Speaker impedance 3 ohm e Speaker drivers 4 x 64 mm 2 5 full range e Frequency response 150 Hz 20 kHz e Dimensions WxHxD 945 x 108 x 86 mm e Weight 3 82 kg Subwoofer Output power 80W RMS 30 THD Impedance 6 ohm Speaker drivers 165 mm e AT woofer e Frequency response 20 Hz 150 Hz e Dimensions WxHxD 192 x 447 x
23. r iPhone see Dock your iPod or iPhone on page 15 3 Press DOCK for iPod 4 Switch the TV to the AV VIDEO source corresponding to the yellow composite cable L gt The TV screen goes blank Browse on the iPod or iPhone screen to select videos or photos 6 Presse Play Pause on the SoundBar remote control to play the videos or photos L gt The picture is displayed on the TV EasyLink The SoundBar supports Philips EasyLink which uses the HDMI CEC Consumer Electronics Control protocol EasyLink compliant devices that are connected through HDMI can be controlled by a single remote control Philips does not guarantee 100 interoperability with all HDMI CEC devices What you need e HDMI CEC compliant devices e An HDMI connection between the connected devices Switch on 1 Switch on the HDMI CEC operations on he TV and other connected devices For information see the manual of the TV or other dovicos 2 Press SETUP repeatedly to select EASTLINK on the dispiay panei see Setup menu options and settings on page 18 Press OK Press the Navigation buttons A VW to select ON 5 Press OK to confirm L gt The EasyLink is on e To disable EasyLink select OFF e When EasyLink is switched off the following options are not available SYS STBY AUD CTRL and TV AUDIO A LA Control devices Control the SoundBar and the other connected HDMI CEC compliant devices with a s
24. s SETUP repeatedly to select AUD CTRL on the dispiay see Setup menu options and settings on page 18 2 Press OK 3 Press the Navigation buttons A V to select ON and then press OK e To play the audio from the TV speakers select OFF 4 Press SETUP repeatedly to select TV AUDIO on the display panel and then press OK 5 Press the Navigation buttons A V to select the audio output for each connected device e HDMI ARC Audio output through the HDMI ARC connection e COAX IN Audio output through the coaxial connection e OPTI IN Audio output through the optical connection e AUX Audio output through the AUX connection 6 Press OK to confirm 7 Press EXIT to exit the menu Note HDMI ARC can only be selected if you connect your SoundBar to the HDMI ARC compliant TV through HDMI ARC connection see Option 1 Connect to V through HDMI ARC on page 10 To disable One touch standby select OFF EN 17 English 7 Change settings This section helps you to change the settings of your SoundBar Caution e Most of the settings are already configured with the best value for your SoundBar Unless you have a reason to change a setting it is best to leave it at the default value Setup menu options and d Press SETUP repeatedly to cycle through the options on the dispiay panei see Setup menu options and settings on page 18 Select an option and then
25. you have a problem refer to the frequently asked questions FAQs for this SoundBar at www philips com support If you still need help contact Philips Consumer Care in your country Warning e Do not attempt to repair your SoundBar yourself This may cause severe injury irreparable damage to your SoundBar or void your warranty Contact Philips If you contact Philips you will be asked for the model and serial number of your product The model number and serial number are on the back or bottom of your product Note the numbers before you call Philips Model No Serial No 2 Notice This section contains the legal and trademark notices Compliance Ce This product is in compliance with the essential requirements and other relevant provisions of Directives 2006 95 EC Low Voltage 2004 108 EC EMC Mains fuse This information applies only to products with a UK mains plug This product is fitted with an approved molded plug If you replace the fuse use one with he ratings shown on the plug e a BS 1362 approval and S he ASTA approval mark Contact your dealer if you are not sure about what type of fuse to use Caution To conform with the EMC directive 2004 108 EC do not detach the plug from the power cord Trademarks S dts Digital Surround Manufactured under license under U S Patent s 5 451 942 5 956 674 5 974 380 5 978 762 6 487 535 amp
Download Pdf Manuals
Related Search