SCOTT XSE 60 Phuke
Contents
1. SAFETY WARNINGS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING SHOCK HAZARD DO NOT OPEN The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instruction in the literature accompanying the appliance To reduce the risk of fire or electric shock do not expose this appliance to rain or moisture DO NOT REMOVE COVER or OPEN CASING Dangerous high voltages are present inside the enclosure Do not open the casing Refer servicing to qualified personnel only Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure LASER CLASS 1 Type Dual semiconductor laser GaAlAs Wavelength 650nm and 780nm LASER PRODUCT Output Power 7mW Beam Divergence 60 degrees INVISIBLE LASER RADIATION WHEN OPEN OR INTERLOCK FAILED OR DEFEATED WARNINGS DO NOT STARE INTO BEAM Avoid direct exposure to laser beam To prevent direct exposure to the laser beam do not try to open the enclosure GB 1 IMPORTANT SAFETY INSTRUCTIONS CAUTION Read and observe all warnings2. O on p a 15 GB 3 Back panel Power cord AC SCART OUTPUT socket FM antenna output FM 75 ohm POWER ON OFF switch Video output 9 37 6 9 52814 Connector for AM loop antenna AUX IN jack HDMI output Audio input L R 0 3 Earphones jack 1 USB port 2S OO Oe I Note First remove the cover to gain access to the back pane CONNECTIONS Connecting to the TV The way in which the main unit is connected and the kinds of cables used can make a noticeable difference in picture quality Before selecting one of the options please make sure that any other equipment has the required input output connections Use any of the options below Different options for connecting your DVD player to a TV Picture Cable Video mode Output s lit Cable supplied Press the HD RES button quay Yes No on the remote control SCART Normal SCART cable No 480P 576P TV RGB Pomposie VIREO Normal MGSO cable Yes 480P 576P TV RGB output yellow HDMI Excellent HDMI cable No 720P 1080i 1080P Press the HD RES button on the remote control will automatically set to the optimal resolution for your TV AUDIO INPUTS You can connect an external appliance for example a VCR or satellite receiver in order to listen to the sound on the speakers of this unit In order to do so use a red and white RCA audio cable supplied t
3. 28 29 lt p A Y CH CH TUNE TUNE Navigation buttons 1 Press these buttons to move the cursor in the menus 2 Flip or rotate a picture 3 Move within the picture in zoom mode 4 Tuner mode Press A W to change the radio frequency Press 4 gt to change the radio station I44 gt p gt Skip backward forward to the previous next chapter in DVD mode or track for CD VCD mode BOOKMARK Display the bookmark menu HD RES Select the HDMI output resolution ZOOM CLEAR 1 Select different zoom ratios during playback 2 Clear the information you have entered ANGLE PBC 1 Select different viewing angles if available on disc 2 Turn PBC ON or OFF on a VCD SVCD disc SOURCE select a mode in the following order DVD USB AUX FM RADIO AM RADIO DVD USB Select DVD or USB mode SLEEP Set your unit to go into standby mode automatically after a preset duration A m OPEN CLOSE STOP Open or close the disc Stop playback VOL Increase or decrease the volume XK MUTE DIM DIMMER Press to mute or restore the sound output from the speakers Press and hold to dim the brightness of the display DISPLAY Display current playback information pil Play Pause playback SETUP Enter or exit the system setup menu OK Confirm the selection lt lt gt DVD mode Fast search backward or forward Radio mode Auto scan SUBTITLE Select a different subtitle
4. must be marked on the DVD disc label PAL NTSC Composite video 1 0 Vp p 75 Ohm Analog audio out 2 0Vp p RMS 20Hz 20KHz approx 3dB FM AM 87 5 108 MHz 531 1620 kHz 50 dB 25 dB 28 dB Video composite output x 1 Scart output x 1 HDMI output x 1 Audio inputs left right x 1 AUX input 3 5mm x 1 2 0 8 GB Some external hard disks may not be supported particularly if they are not in FAT32 format Detecting and scanning the hard disk may sometimes take a few minutes 305 L X 305 W X 273 H mm Approx 8 Kg Note Due to continuing improvements these technical specifications are subject to change without notice sonic emotion and Bes are registered trademarks of sonic emotion ag If at any time in the future you should need to dispose of this product please note that waste electrical products should not be disposed of with household waste Please recycle where you nearest recycling centre is Check with your local authority or retailer for more details Waste Electrical and Electronic Equipment Directive GB 17
5. VCD SVCD is playing press ANGLE PBC repeatedly to switch PBC Playback Control on or off If PBC ON is selected the disc menu if available will appear on the TV Use jqq pp or the number keys 0 9 to select an option Press MENU to return to the disc menu when PBC is on Bookmark bookmark feature allows you to mark a specific point 7 1 Creating a Bookmark LAGUS TT 11 CH 1 00 03 21 During DVD CD VCD playback press BOOKMARK to access the bookmark menu Press OK to add the first bookmark then use the lt gt buttons to move the cursor and press OK to add additional bookmarks 7 2 Recalling a Bookmark MARK 1 TT 11 CH 1 00 03 21 During playback press BOOKMARK to access the bookmark menu Use the lt gt button to highlight the desired bookmark and press OK to play from the bookmark point Press ZOOM CLEAR to delete the highlighted bookmark Note This function is only available with VCDs when PBC is off Th D PLAYING MP3 J PEG WMA MPEG 4 FILES pil Play Pause Press to start or pause playback i44 gt gt Skip Press to skip to the next previous file E Stop Press to stop playback and display the selection menu JPEG and movie files Note Press PII to play from the beginning ZOOM Press to zoom into the picture when playing JPEG or MPEG4 files Navigation Press the navigation keys A W lt gt to select a file and then press OK to start playbac
6. gt to select RANDOM mode PLAY MODE Then press OK to confirm MODE Note REPEAT This function is only available with VCDs when PBC is off Repeat playback A specific title chapter or track can be played repeatedly Note During VCD SVCD playback repeat playback is only available when PBC is OFF Repeating a Title Chapter Track All disc Press the PLAYMODE button then use A to select the REPEAT option Use the lt gt button to select the repeat mode and press OK to confirm PLAY MODE For DVDs OFF gt Chapter gt Title For CD VCD SVCD Disc OFF gt REP 1 gt REP All For MP3 JPEG WMA files OFF gt REP DIR gt REP 1 gt REP AIl MODE REPEAT RERA Repeating a Specific Section A B repeat playback allows a specific section to be repeated While the disc is playing press the A B button to set the beginning of the section point A to be played repeatedly REPEAT A Press the A B button again to set the end of the section point B to be played REPEAT A B repeatedly The unit will then immediately begin replaying the selection A to B repeatedly Press the A B button again to clear the programmed repeat playback and return to normal playback GB 12 Note The A B repeat function can only be used within the same title or track If points A and B are defined in different titles or tracks A B repeat is cancelled VCD SVCD playback control While a
7. ER TO BEGIN encoding is complete press OK to confirm TRACK 1 Highlight QUIT and press OK to exit the CD RIPPING menu TRACK PROGRESS All the tracks are saved in the folder named Unknown Album TOTAL PROGRESS Notes SPEED X1 If USB ERROR appears during CD ripping or the MP3 files cannot be CHANGE SPEED read after ripping please format the USB device in FAT or FAT32 and then start the ripping again LISTENING TO THE RADIO Important Make sure the FM and AM antennas are connected and FM antenna is extended You can program up to 20 each FM and AM radio stations for easy recall To search for a radio station paikO X en 1 Press the ly button to turn on the unit me ope b 2 Press the SOURCE button repeatedly to select FM or AM mode aan md Titi AMBIENCE Mimin BALANCE mutt 3 Tune to the radio station using one of the following methods To store a radio station qi Manual Tuning Press A w repeatedly on the remote control until the desired frequency is reached Automatic Tuning Press the lt gt gt button on the remote control to activate the AUTO SCAN function The unit will stop on any radio station found Repeat this process until the unit stops at the desired station If you would like to store the current station press the OK button and koek n the frequency flashes on the display H Press lt gt or use the remote control number keys to select the pre
8. FS format If the device does not work with this unit please check the file system and format it in FAT or FAT32 Although you can watch a movie immediately to get the best from this unit it is recommended that you carry out the basic setup first BASIC SETUP Press the button to turn on the unit and press the SETUP button when no disc has been inserted or in stop mode to enter the SYSTEM SETUP menu Basic Operation 1 Press lt or to select one of the menus below icons at the top of the display SYSTEM SETUP LANGUAGE SETUP VIDEO SETUP AUDIO SETUP SPEAKER SETUP oe oN Press A or W to select different settings in a menu Press or OK to confirm the setting Press A or W to select a new setting then press OK to confirm the new setting Repeat steps 1 to 3 to change any settings Press the SETUP button to exit setup For more details please refer to the next chapters 1 SYSTEM SETUP 1 1 SCREEN SAVER Use this setting to turn the screen saver option on or off If you turn the screen saver on the screen saver image appears when you leave the player in pause or stop mode more than 3 minutes It protects the television screen from being JPEG TIME PASSWORD damaged RATING On To turn screen saver on Off To turn screen saver off 1 2 JPEG TIME Select the slide show interval 5 SEC 10 SEC 15 SEC between each picture f m while playing the picture CD 1 3 PASSWORD amp RATING Many DVD movie d
9. ISPLAY to display the playback information available depending on the disc GOTO function This function allows you to select any point on the disc and to start playback from this point pvo se 141 00 03 42 CD _ A nS 100503772 L Total Tite C Total Chapter G minit Current Title Current Chapter Time Track Time Selecting a Specific title chapter for a DVD or track for a CD VCD You can select any specific title chapter track and start playback from this point by directly selecting it Press GOTO Press lt or P gt to highlight the title chapter track field and press the corresponding number key 0 9 Press OK to confirm The unit will then start playback from the selected position Note Press ZOOM CLEAR to cancel a selection Locating a specific time A specific time can be selected by directly entering the time hours minutes seconds Press GOTO Press lt q or P to highlight the time Using the number keys directly enter the time when playback should start The first two digits are for the hours The next two digits are for the minutes The last two digits are for the seconds After entering the time press OK to confirm The unit will then start playback from the selected time Notes Some discs may not allow use of this function Some scenes may not be located as precisely as specified This method for accessing a specific location is available only within the current title of the DVD d
10. UCTIONS meerminne 2 BOX CONTENT erei e ee E E esebe ekea a 3 FRONT TOP AND BACK PANEL CONNECTIONS REMOTE CONTROL GETTING STARTED amp BASIC SETUP irinin aaiae 6 9 SD SOUND TECHNOLOG Voie e a at tiated 9 PLAYING DVD CD VCD DISCS ADVANCED PLAYBACK FUNCTION 11 13 PLAYING MP3 JPEG WMA MPEG 4 FILES 13 14 AUDIO CD RIPPING ENCODING IN MP3 FORMAT 14 15 LISTENING TO THE RADIO nn nnnnncn ence ccc cence nec nce cence cece e nec c nance n nsec nnnen nna nnnannnnnnnnnnnnnnnnnnns 15 TROUBLESHOOTING GUIDE 2 nnn i 16 TECHNICAL SPECIFICATIONS 17 BOX CONTENTS e DVD Micro System e RCA audio cable red white FMantenna and AM loop antenna RCA video cable yellow e Remote control e Instruction manual FRONT TOP AND BACK PANEL Front and top panels 0 standby button 3D SOUND button BALANCE lt p gt buttons S SOURCE button Pil PLAY PAUSE button m STOP button 4 OPEN CLOSE button Standby mode LED indicator Infrared Receiver Window IR LCD Display Disc slot VOLUME dial AMBIENCE A F level buttons Speakers 6x Subwoofer 2 PON OY BON
11. a built in installation such as a bookcase or rack unless correct ventilation is provided or these instructions have been adhered to Do not install near any heat sources such as radiators heat registers stoves or other electronic devices including amplifiers that produce heat GB 2 Prevent the power cord from being walked on or pinched particularly at plugs and connections The power cord and mains plug should remain easily accessible Use only attachments or accessories specified by the manufacturer Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with this unit Exercise caution when moving the cart unit combination to avoid injury from tip over Unplug this unit during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when your unit has been damaged in any way such as when the power supply cord or plug is damaged liquid has been spilled into your unit or objects have fallen into it your unit has been exposed to rain or moisture it does not operate normally or it has been dropped When replacement parts are required be sure the service technician uses replacement parts specified by the manufacturer or have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other hazards CONTENTS A EE E E E 1 IMPORTANT SAFETY INSTR
12. and instructions in this user guide and those marked on your unit Retain this guide for future reference This unit has been designed and manufactured in a way that ensures your personal safety Improper use can result in electric shock or fire hazard The safeguards incorporated in this unit will protect you if you observe the following procedures for installation use and servicing This unit does not contain any parts that can be repaired by the user Do not remove the casing or you may be exposed to dangerous voltage Refer servicing to qualified service personnel only Read all safety and operating instructions before operating your unit Keep these instructions for future reference Heed all warnings on your unit and in the operating instructions All operation instructions should be followed Do not use this unit near water For example do not use this unit near a bathtub washbowl kitchen sink laundry tub in a wet basement near a swimming pool or other areas located near water Clean only with a dry cloth Unplug this unit from the wall outlet before cleaning Do not use liquid cleaners Install in accordance with these instructions Do not block the ventilation slots and openings in the unit in order to ensure ventilation and reliable operation of your unit This will also prevent the unit from overheating Do not place the unit on a bed sofa rug or other similar surface This product should not be placed in
13. ar the password RESTORE THE FACTORY DEFAULT SETTINGS In DVD mode with NO DISC in the unit press 76000 on the Remote Control to reset the DVD player to the default settings The unit will switch to standby mode automatically IMPROPER FUNCTIONING The normal function of the product may be disturbed by external interference Just reset the product by disconnecting and reconnecting the power cord HDMI Compatibility HDMI is continually evolving to meet the needs of the market Any symptoms of compatibility problem with your apparatus such as incorrect color space that may not be the fault of this unit can probably be resolved with a firmware update from the manufacturer If you do have questions please visit the following HDMI official FAQ web site http www hdmi org learningcenter faq aspx GB 16 TECHNICAL SPECIFICATIONS Power supply Max power Consumption Standby power consumption Speaker output RMS impedance Subwoofer output RMS impedance Discs and files supported TV system Video out Audio in Frequency Response Tuner Frequency Range S N Ratio Stereo separation Terminals USB Port Type Maximum Capacity supported by the USB Port Dimension Weight full package AC 230V 50 Hz 120 Watt 0 54 Watt 6x 5 W 8 Ohm 30 W 6 Ohm DVD Video DVD R RW DVD R RW CD DA CD R RW MP3 JPEG VCD2 0 MPEG 4 Xvid avi The zone this player can play discs from zone 2 This indication
14. as Widescreen images are shown on screen with black bands on the top and bottom 16 9 Select this format when the unit is connected to a widescreen TV Notes Some discs may not be able to play your selection due to the format in which the DVD was recorded A disc recorded in 4 3 format will only play in 4 3 format The TV format should correspond to your TV 3 2 TV SYSTEM This player supports two different TV systems NTSC or PAL The setting of the unit can be changed to match your TV NTSC Select this system if your television supports the NTSC color RTE system used in North America PAL Select this system if your television supports the PAL color system eure used in Europe and Asia 3 3 HDMI OUTPUT This function allows the user to select the screen resolution for HDMI output Note If your TV or monitor does not support HDCP a blue screen without a picture appears when playing DVD discs which are protected by copyright The HDMI output options depend on the TV system selected PAL or NTSC See your TV instruction manual for more information on how to select the video input source Please make sure your HD TV supports the high resolution selected You can easily set the optimal resolution automatically by pressing the HD RES button on the remote control 4 AUDIO SETUP 4 1 DYNAMIC RANGE Reduces large variations in volume for night time listening On Loud sounds are turne
15. at contains scenes recorded from multiple angles e Press ANGLE PBC repeatedly to select different viewing angles if available on the disc GB 10 PBC VCD SVCD When a VCD SVCD is playing press ANGLE PBC repeatedly to switch between PBC ON and OFF If PBC ON is selected the disc menu if available will appear on the TV Use the number keys 0 9 to select the options in the menu AUDIO select the audio languages available on the disc O ED al During playback different audio languages can be selected When a disc is playing press AUDIO FM ST to show the current audio language Press repeatedly to select the desired audio language Notes Press this button to select an audio output STEREO Mono L Mono R MIX MONO when playing a VCD There will be no sound output when a DTS audio format is selected if a DTS disc is playing SUBTITLE select the subtitle languages available on the disc EEF 3 ENGLISH During playback you can change the subtitle language or disable the subtitle function While a disc is playing press SUBTITLE to show the current subtitle language Press repeatedly to select the desired subtitle language Notes This function can only be used for discs on which different subtitle languages have been recorded The number of languages recorded may be different depending on the disc ADVANCED PLAYBACK FUNCTIONS 1 2 1 2 2 DISPLAY function While the disc is playing press D
16. d down slightly Off Sounds are played as they were recorded on the disc DYNAMIC RANGE GB 8 5 SPEAKER SETUP 5 1 VOCAL MODE When playing karaoke discs you can select one of the following vocal VOCAL NONE SPEAKER TEST NOGAL EEET effects VOCAL NONE VOCAL LEFT VOCAL RIGHT and VOCAL ALL VOCAL RIGHT Note This function is not available for some karaoke discs 5 2 SPEAKER TEST Press gt to highlight an icon the corresponding name speaker 1 AE speaker 6 or subwoofer is displayed and a test tone will be produced from that speaker Repeat the procedure to test the other speakers pie Press lt or OK to exit the test SPEAKER 1 3D SOUND TECHNOLOGY 3D Sound technology uses wavefield synthesis and soundfield reproduction to eliminate the physical dimensions of a room and transform it into a virtual soundfield With wavefield synthesis sonic waves are produced and dispersed throughout the listening room through 6 speakers and one speaker subwoofer ensuring localization of virtual sound sources does not depend on the listener s position As in a natural environment real sounds are heard within the room regardless of the device positioning 3D Sound on aweence TELLIN Tuenummnina BALANCE jf 3D sound During playback press the 3D button on the remote control to display the sonic emotion sound menu The following options are available Use the A W buttons to select a setting and us
17. der and display all the files in that folder Select the folder of your choice and press the py button MOVIE MPEG 4 Files The unit will read the file currently selected Notes WMA MP3 JPEG and MPEG4 files cannot be played simultaneously The highlighted icon at the bottom of the menu indicates what kind of file is playing AUDIO CD RIPPING ENCODING IN MP3 FORMAT With this player you can record your favorite CD music to a USB device with MP3 format 1 Check that the USB device has been properly connected RIP_CD UNKNOWN ALBUM 2 Insert a CD disc that contains the music you want to record into the disc tray BITRATE 128KBPS 3 Use the DVD USB button on the remote control to select the disc mode 4 Press the RIPPING button on the remote control the CD RIPPING SORENE menu is then displayed on the screen e Inthe OPTIONS menu use A W lt 4 gt to choose an option and then press OK to change the settings ENCODE OPTIONS SPEED Set the encoding speed between 1X and 4X BITRATE You can choose one of the following bitrates 128KBPS 160KBPS 192KBPS 256KBPS and 320KBPS The sound quality of the MP3 files depends on the compression rate that you choose In order to obtain audio quality similar to that of a CD use a sampling rate between 128 Kbps and 160 Kbps Use of a higher rate such as 192 Kbps or more rarely gives better quality Conversely files with a decompressi
18. e lt gt buttons to adjust After setting press the 3D button 8S again to confirm and exit the menu 3D Sound ON OFF Turn the 3D sound effect on off When the 3D sound is turned on you can adjust the ambience and balance Ambience Enhance the surround sound effect Balance Adjust the balance left and right Note You can also use the 3D SOUND AMBIENCE A W and BALANCE lt gt buttons on the unit to access above settings GB 9 PLAYING DVD CD VCD DISCS 1 A Open Close Note Load the disc on the disc slot with disc label facing upwards The unit will start playback automatically Press the button to eject the disc 2 Play Pause Press to start or pause playback 3 lt lt gt gt Backward Forward Search Slow Motion Press lt 4 gt to search backward or forward Press PII to resume normal playback speed Each time the or gt button is pressed the playback speed changes in the following sequence x2 x4 x8 x20 In pause mode press gt gt to start forward slow motion play according to the following sequence 1 2 1 3 1 4 1 5 1 6 1 7 Press pil to resume normal playback Note Slow motion is not applicable to CD playback 4 4 lt p gt 1 Skip Forward Backward When a disc is playing you can skip backward forward to the next track or chapter Press the q button to skip to the beginning of the previous chapter or track Press the PPI button to skip to the beg
19. e pressing OK press the CLEAR button and enter the 4 digit password again DVD discs that are rated above the selected level will not play To change the password first unlock the system by entering the old password then enter the new password w ndicates that the parental lock is NOT active The parental lock is active The rating levels are only functional when the parental lock is active The rating levels can only be changed when the parental lock is not active If you forget the password enter 76418 when no disc has been inserted in the player The factory password settings will then be restored GB 7 2 LANGUAGE SETUP You can select different languages for the setup menu You can also select different languages for the audio subtitles and disc menu according to the languages available on the DVD 2 1 OSD LANGUAGE Select the on screen display language 2 2 AUDIO LANG OSD LANGUAGE Select the audio language AUDIO LANG SUBTITLE LANG 2 3 SUBTITLE LANG MENU LANG Select the language for the subtitles displayed on the TV screen 2 4 MENU LANG Select the disc menu language 3 VIDEO SETUP 3 1 TV TYPE 4 3 PS Select this format if the unit is connected to a normal TV The left and right edges of the widescreen images are cut so that the A image can be displayed in full screen TV TYPE 4 3 LB OUTPUT H 4 3 LB Select this format when the unit is connected to a normal TV one 165 l
20. inning of the next chapter or track For audio CD discs use the number buttons to directly jump to a track number 5 m Stop e Press once to stop the current playback instantly and enter the Resume Play mode Press pil to resume playback from the point where the disc was stopped Press twice to stop playback completely It is now impossible to resume playback from the place where playback was stopped Press pil again to start playback from the beginning of the disc 6 MENU Press to display the disc menu Notes This button has no function during playback of an audio CD For VCDs this function is only available in PBC ON mode 7 TITLE Press to display the title menu if available on the disc DVD only 8 ZOOM The picture size can be magnified or reduced during playback When a disc is playing press the ZOOM CLEAR button Each time the ZOOM CLEAR button is pressed the ZOOM settings will be changed as follows ZOOM 2 gt ZOOM 3 gt ZOOM 4 gt ZOOM 1 2 gt ZOOM 1 3 gt ZOOM 1 4 gt ZOOM OFF While an image is magnified use the gt A W keys to pan the image for viewing To return to the normal view press the ZOOM CLEAR key until the message ZOOM OFF is shown The screen will return to normal Note In HD video mode zoom function does not work for JPEG files 9 ANGLE PBC ANGLE change the viewing angle on a DVD Different viewing angles can be selected when playing a DVD disc th
21. isc or current track of the CD For VCDs this function only works if PBC is off Press ZOOM CLEAR to delete any mistakes GB 11 3 1 3 2 3 3 5 1 5 2 Programming playback PLAY MODE Contents of the disc can be played in a selected order MODE Press the PLAYMODE button REPEAT When MODE is highlighted use lt or gt to select PROG mode Then press OK to confirm anne Note During VCD SVCD playback the function is only available when PBC BREE is OFF PLAY MODE DVD Programming Enter the title numbers in gg 2 digit format e g 01 Use the q gt buttons to highlight the chapter number and enter the chapter numbers in two digits Use A W lt r P to move to another field Repeat the above steps for the next titles chapters Press pa or highlight PLAY on the screen and press OK to start the programmed playback PLAY CLEAR CD VCD SVCD Programming Sf 13 1 Enter the track numbers of your choice two digits 6 10 f 46 Refer to the previous section to program the tracks of your choice Se NA oe HD a iee 12 fen 96 el Clear the Programs Highlight the current field on the screen and press ZOOM CLEAR to delete the program Note Highlight CLEAR on the PROG screen and press OK to delete all programs Random playback Chapters in a DVD and tracks in a CD VCD can be played in random order Press the PLAYMODE button When MODE is highlighted use lt
22. iscs contain Motion Picture Association rating codes This DVD Player will recognize the codes on these discs providing a method to prevent children from viewing films which are not suitable for them PASSWORD RATING 1 Kid safe Suitable for all audiences Fels 2 G Suitable for general audiences 3 PG Parental guidance suggested 4 PG 13 Parental guidance suggested unsuitable for children under 13 5 PG R Parental guidance recommended brief scenes containing mature language or situations 6 R Restricted violence adult language and situations unsuitable for young viewers RATING SCREEN SAVER JPEG TIME 7 NC 17 Adult theme or content not suitable for children under 17 PASSWORD 8 Adult Adult themes language and nudity Select this level of control to switch off parental control Notes RATING Press A or W to highlight Rating then press Select a parental control level and press OK Press A or W to select Password and press gt Use the number keys 0 9 to enter the four digit password and press OK to confirm The system is locked again which means that the parental control function is switched on In the SYSTEM SETUP menu press A or W to highlight Password and press gt Use the number keys 0 9 to enter the four digit password and press OK to confirm The system is unlocked which means that you can adjust the setup for parental control If a mistake is made befor
23. k Audio MPEG4 During playback press AUDIO FM ST to show the current audio language Press repeatedly to select the desired audio language ROTATE Flip for JPEG files only During the playback of JPEG files press lt gt to rotate or A to flip the picture GB 13 Selection Menu The selection menu will appear when MP3 WMA JPEG MPEG4 files are read CSC BITRATE BITRATE 03 MP3 BITRATE_03 All the folders will appear on the left hand menu and will be numbered in ascending SETRA BITRATE 04 BITRATE_05 order When one of the folders is highlighted all the contents of the folder will be NUT BITRATE o6 displayed on the right side of the menu You can display one type of file music pictures or films Use the navigation keys to highlight the icon corresponding to the type of file that you would like to select music image or film These icons can be found at the bottom of the selection menu Press OK to confirm Then select the files of your choice and press OK or pil to start playback MUSIC MP3 WMA files The unit will play the MP3 WMA file currently selected It will then play all the files in the sub folders contained within the current folder After that the unit will play the remaining folders on the disc PICTURE JPEG files Press pq and the unit will start a slideshow from the JPEG file currently selected Then you can zoom or rotate the displayed pictures You can also select a fol
24. language AUDIO FM ST 1 in DVD mode select different languages if available on the disc For VCD discs this option also enables you to select one of these audio modes STEREO MONO L MONO R and MIX MONO 2 In FM mode select mono or stereo GOTO Display the search menu to search for a specific title chapter track or time on a disc PLAYMODE Select different play modes program random or repeat A B Set point to point repeat playback or to clear repeat mode EX BASS EXTRA BASS Boost the bass effect EQ Select an EQ mode FLAT ROCK POP CLASSIC or JAZZ GB 5 GETTING STARTED amp BASIC SETUP GETTING STARTED Power supply for the unit 1 Carry out the connections for the unit as shown in CONNECTIONS 2 Insert 2 AAA batteries supplied into the battery compartment in the remote control taking care to follow the correct polarities 3 Connect the power cord to an AC mains outlet Set the power ON OFF switch located at the back of the unit to the ON position and press the button on the unit or on the remote control to turn on the unit Notes The protective disc will be automatically ejected for first time use The unit is fitted with a cooling fan and it is therefore normal to hear the fan when the unit is turned on 4 Turn on the TV and set to the correct video in source 5 To go to the standby mode press the button on the
25. o connect the audio outputs on the external appliance to the left right audio inputs on the DVD micro system Then press the SOURCE button to select AUX mode AUX IN You can use your DVD micro system to amplify the sound from your external audio device such as an MP3 CD or MD player In order to do this connect the AUX IN jack of this unit to the headphones output of your audio device using an audio cable not supplied Then press the SOURCE button to select AUX mode Note Do not connect both RCA left right audio inputs and AUX IN jack at the same time as both signals would be mixed GB 4 REMOTE CONTROL AUDID EM ST TITLE Were BOOKMARK SUBTITLE zoom ANSLE CLEAR SLEEP Pec MEN RIFPING HSCOTT XSE 60 d standby Switch the unit on or place it in standby mode 0 9 number keys In DVD VCD CD mode use these buttons to enter the title chapter track and time search selections In radio mode use these buttons to enter a preset station TITLE Display the title menu if available on the DVD disc 3D Display the 3D sound menu MENU RIPPING 1 In DVD mode press this button to display the disc menu 2 When PBC mode is on press this button to view a VCD disc menu 3 In CD mode Convert CD audio files into MP3 digital files and save them ona USB flash drive 6 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
26. on rate lower than 128 Kbps are not of sufficient quality FILE OPTIONS CREATE ID3 TAG This option allows you to create ID3 tags if available on the disc CREATE PLAYLIST This option allows you to create a playlist under the name Unknown Album m3u This list includes all the recorded tracks and can be played on a PC STORAGE OPTIONS RIP CD UNKNOWN ALBUM This source on which you record the tracks USB a ee i ris e In the TRACKS menu the default is to record all the tracks RACK that have a cross mark in the box next to them You can uncheck all the tracks or several tracks of your choice In order to do this you can use A or to select the track that you do not want to record and then press OK to confirm deletion R2 B3 wa Ws We R7 Kae Ko R1 0 GB 14 In the START menu you can check the total tracks total time and total size 3 Sen that you want to record SUMMARY Press OK to start playing and encoding the selected tracks options TOTAL TRACKS 54 P TOTAL TIME 60 26 The track progress bar and total progress bar will display on the screen Racks TOTAL SIZE 67 0MB indicating the encoding progress gt During encoding highlight CHANGE SPEED and press OK to change the encoding speed If you select the encoding speed 4X the sound will be muted Highlight CANCEL and press OK to stop encoding FULL appears if the storage space on the USB device is full When PRESS ENT
27. remote control or on the unit If the unit is not to be used for a long time please disconnect the power cord Notes The effective distance for remote control operation is about 5 meters Replace the batteries when the remote control operating distance starts to reduce If the remote control is not to be used for a long time remove the batteries to avoid damage caused by battery leakage Precautions when using batteries 1 Use only the size and type of batteries specified 2 Ensure that you follow the correct polarities marked in the battery compartment when installing the batteries Reversed batteries may damage the remote control 3 Exhausted batteries must be removed to prevent possible battery leakage 4 Dispose of batteries properly according to environmental regulations Inserting a disc 1 Press the S button on the unit or the SOURCE or DVD USB button on the remote control to select DISC mode 2 Insert a disc press the 4 button on the front panel or on the remote control to close the disc The unit will read the disc and start to play it or it will display a start menu Inserting a USB device in DVD mode Insert a USB device in the USB port on the unit If a disc is inserted press the DVD USB button on the remote control to select USB mode The player will automatically play the files contained in the USB device Notes K Please ensure the USB device has been properly inserted in the USB port This unit cannot support NT
28. set station number that you want to allocate to this station Press OK again to store the radio station under this channel number The radio station is now memorized Repeat the above steps to store up to 20 radio stations Note When you tune to an FM station with a weak signal manually press AUDIO FM ST on the remote control to switch from stereo mode to mono mode to reduce the background noise To recall a memorized radio station Press lt gt on the remote control or j q ppj on the front panel to recall a memorized radio station GB 15 TROUBLESHOOTING GUIDE If it appears that the unit is faulty first consult this checklist It may be that something simple has been overlooked Note Under no circumstances should you try to repair the unit yourself as this will void the warranty Only qualified service personnel should remove the cover or service this unit NO POWER Check that the player is switched on Check if the power cord is properly connected Check the position of the ON OFF switch NO PICTURE Check if the TV is switched on Check if the correct AV input is selected on the TV refer to the TV manual for more details and correct VIDEO output is selected on this unit Check the video connection between the player and TV NO PICTURE AT HDMI OUTPUT Check if the HDMI input is selected on your TV Check if the HDMI resolution selected corresponds to resolution of your HD TV Check if your HD TV suppor
29. ts HDCP BAD QUALITY PICTURE Check the disc for fingerprints and clean with soft cloth wiping from the center to the edge A small amount of picture distortion may sometimes appear this is not a malfunction Check if the disc format is compatible with the TV PAL NTSC BLACK AND WHITE PICTURE Check if the disc format is compatible with the TV PAL NTSC Check that DVD player is not connected to the TV through the VCR PICTURE INTERFERENCE Relocate the unit further away from possible sources of interference or emission e g radio power amplifier radiator etc RADIO RECEPTION IS POOR Check that the antenna is connected correctly Move the antenna to another location and adjust its position to obtain the best signal reception Tune to the correct radio station frequency Place the antenna further away from any equipment that may be causing the noise or interference THE PLAYER DOES NOT RESPOND TO THE REMOTE CONTROL Aim the remote control directly at the sensor on the front of the unit Avoid all obstacles which may interfere with the transmission path Inspect and or replace the batteries NO SOUND Check audio connections if an external source is being used Clean the disc Check if the disc is defective by trying another disc DISC CANNOT BE PLAYED Ensure disc is placed properly into the disc tray YOU HAVE FORGOTTEN THE PASSWORD Under DVD mode with NO DISC in the unit press 76418 on the remote control to cle
Download Pdf Manuals
Related Search