APC SurgeArrest Essential
Contents
1. 2 illuminates yellow to indicate the surge protector is loaded in excess of 12 amps Please disconnect devices until the indicator is no longer illuminated Power Switch Circuit Breaker The combination power switch circuit breaker turns on power to the surge protector s receptacles and acts as a circuit breaker to protect against overloads gt 15 amps If the circuit breaker has tripped due to an overload first unplug one or more pieces of equipment and then reset the circuit breaker by turning the switch OFF and then ON Installation 1 Make sure the surge protector s power switch is turned OFF 2 Plug the surge protector s power cord into a properly wired outlet Note Most power tools are double insulated and equipped with a polarized plug one blade is wider than the other Polarized plugs will fit in a polarized outlet only one way If the plug does not fit fully in the outlet reverse the plug If it still does not fit do not force it into the surge protector Discontinue the use of the tool Do not change the plug in any way 3 Plug the power cord from your computer and or other electrical equipment into the surge protector s outlets 8 The outlet to the far right provides for connection of a transformer block type plug Note Verify your computer and electrical equipment operate correctly before plugging them into the surge protector 4 Turn ON the surge protector s power switch to supply power to the conne2. APCE Model PDIY7 7 Outlet Surge Protector by Schneider Electric Safety Do not operate surge protector in explosive environments such as in the presence of flammable liquids gasses or dusts Electrical equipment may create sparks which may ignite the liquid dust or fumes e Keep power cords away from heat oil sharp edges or moving parts Discontinue use immediately in case of power cord damage Damaged cords increase the risk of electric shock e For indoor use only Do not use this surge protector outdoors or in hot or damp locations Do not use solvents or liquids when cleaning the surge protector Use only clean dry cloths to remove dirt carbon dust or other residue Do not use with aquarium equipment e Do not install this device during a lightning storm CAUTION Do not install this device if there is not at least 10 meters 30 Feet or more of wire between the electrical outlet and the electrical service panel Indicators and Switches Protection Working When the power switch is turned on the green Protection Working indicator illuminates to tell you the surge protector is capable of protecting your equipment from harmful electrical surges Your equipment will be protected even when the surge protector s power switch is turned off If the indicator does not illuminate when the power switch is turned on the unit has sustained damage and is no longer capable of protecting your equipment Overload Indicator
3. cted equipment Note This device features an internal protection which will disconnect the surge protection component at the end of its useful life but will maintain power to the load now unprotected If this situation is undesirable for the application follow the manufacturer s instructions for replacing the device Specifications Nominal Operating Voltage 120 Vac 50 600Hz S Y Contact Information Operating Temperature 0 to 40 C 32 to 104 C Technical Support http www apc com support Operating Relative Humidity 0 to 95 non condensing Internet http www ape com Safety Approval UL1449 UL1363 Worldwide 1 401 789 5735 Limited Warranty APC warrants its DIY surge protectors for the lifetime of the product from the date of original purchase We will repair or replace at our option any part or parts of the prod uct and accessories covered under this warranty which after examination prove to be defective in workmanship or material during the warranty period This warranty does not apply to repair or replacements required due to misuse abuse normal wear and tear or repairs attempted or made by anyone other than APC service personnel This warranty does not extend to surge protectors used in commercial construction To obtain service under warranty you must obtain a Returned Material Aut
4. horization RMA number from APC or an APC Service Center with transportation charges prepaid and must be accompanied by a brief description of the problem and proof of date and place of purchase This warranty applies only to the original purchaser 990 2668B 2010 APC by Schneider Electric All trademarks are owned by Schneider Electric Industries S A S American Power Conversion Corporation or their affiliated companies
Download Pdf Manuals
Related Search